SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
Apr 05, 2016
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
ORDERING INFORMATIONORDERING INFORMATIONORDERING INFORMATIONORDERING INFORMATION
PART NO. DESCRIPTION
SPT06AN 670mm Power pole anodised finish c/w floor and desk mounting bracket and cover
SPT21AN 2.1m desk to ceiling power pole anodised finish c/w ceiling kit, under desk mounting bracket,
desk grommet and cover
SPT28AN 2.8m Power pole anodised finish c/w ceiling Kit, floor bracket and cover
SPT33AN 3.3m Power pole anodised finish c/w ceiling kit, floor bracket and cover
SPTFB Floor mounting bracket
AXC Ceiling flange
AXCD Floor access grommet
SPTDB Under desk mounting bracket
SPTLID02 200mm Pre cut cover
SPTB28 2.8m Brush strip
OTHER LENGTHS AVAILABLE UPON REQUEST
TOTEM POWER POLE
This stylish new round Totem pole is a simple
cable protection solution specifically designed
for bringing power and data cables from the
floor, ceiling or the workstation.
The Totem by CMS includes an access floor
mounting kit and a dividing plate creating two
compartments to retain segregation between
services.
Available with access door or brush strips.
Brush Strip Segregation plate Access door
SOME OF THE FEATURES INCLUDE:
- Unique profile
- Available in 670mm, 2.1m, 2.8m and 3.3m
- Floor and desk mounting kit included
- Segregation plate included
- Stylish anodised finish
1
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
POWER POLE
- Unique profile
- Available in 670mm, 2.1m, 2.8m and 3.3m
- Floor and desk mounting kit included
- Segregation conduit included
- Stylish anodised finish
SOME OF THE FEATURES INCLUDE:
SPA002
SPA101
SPA003
SPAL200
SPA005
POWER POLE ORDERING INFORMATION
PART NO. DESCRIPTION
SPA28 2.8m Power Pole Anodised finish c/w Ceiling Kit, Floor Bracket, Cover and 3 x Service Mounting boxes
SPA33 3.3m Power Pole Anodised finish c/w Ceiling Kit, Floor Bracket, Cover and 3 x Service Mounting boxes
SPA101 Service Mounting Box
SPA002 ‘T’ Bar Mounting kit
SPA003 Floor Mounting Bracket
SPA005 Ceiling Flange - White
SPAL200 200mm Pre cut cover
OTHER LENGTHS AVAILABLE UPON REQUEST
2b
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
ORDERING INFORMATION
PART NO. DESCRIPTION
CPT2CF 2800mm Ceiling to floor Power pole anodised finish c/w ceiling kit, floor bracket and cover
CPT2CW 2100mm Ceiling to workstation power pole anodised finish c/w ceiling kit, desk flange and cover
CPT2FD 720mm Floor to workstation power pole anodised finish c/w floor bracket, cover, under desk mounting
bracket
CPT2-02U 300mm Power pole anodised finish, desk flange mount c/w 2 x Auto switch GPO and USB
CPT2FS 900mm Free standing power pole anodised finish c/w floor bracket and cover
CPT2B Floor mounting bracket including shroud
CPT2C Ceiling flange
CPT2D Under desk mounting bracket
OTHER LENGTHS AVAILABLE UPON REQUEST
CENTRE POINT SERIES II
The stylish new round Centre Point Series II Power Pole by
CMS provides power, data and USB solutions to the
workplace, all in one modern anodised pole.
Apart from supplying power, data and USB accessibility
the Centre Point Series II Power Pole allows for the
reticulation of cable from the ceiling or floor to the
workstation.
Various configurations are available with the Centre Point
Series II, giving you flexibility and design possibilities for
your office space.
SOME OF THE FEATURES INCLUDE:
- Unique profile
- Available in 300mm, 720mm, 900mm, 2100mm and 2800mm
- Floor and desk mounting kit included on applicable models
- Continuous segregation barrier
- Stylish anodised finish
- Customisation available upon request Desk Mount Freestanding Power Pole
Note: - Outlets sold separately except for 300mm desk mount option
- Anodised finish as standard (other colours P.O.A)
3 11.8.14
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
4 15.9.14
FLUSH FLOOR TRUNKING
PLATE ACCESSORIES H PART NO.
Cross 70 FF33570C
Leveling & Joiner FF33570LP
Tee 70 FF33570T
90º Bend 70 FF33570B
Junction box 70 FF335705JB
THE TRUNKING MUST BE INSTALLED ON A FLAT SOLID SURFACE, PREFERABLY WITH A
MINIMUM RIBBON SCREED THICKNESS OF 10MM AND SET FLUSH IN THE SCREED
BASE TRUNKING PART NO.
1200mm x 335 x 70 FF33570
Base trunking
Junction boxes
Levelling/joiner plate * Special sizes available upon request
Cross fitting
‘T’ fitting
Bend fitting
335
300
1200
300
335
400
150
300 300
335 335
335
300
500
300
300
300
417.5
417.5
70
* * * * Note: Junction box comes with 4 x GPO’s, 1 x L3.20 Rewireable
connector, 4 x Provision for data, 1 x Apollo series 4 compartment
floor box lid.
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
5 15.9.14
SCREED TRUNKING
Special Features:Special Features:Special Features:Special Features: - Simple to install
- Sturdy construction
- 2mm thick steel trunking
- 2 compartment floorbox
- Moulded carpet trim
JUNCTION BOX:JUNCTION BOX:JUNCTION BOX:JUNCTION BOX: - Die cast lid for maximum strength
- Adjustable height for easy levelling
* This product is made to order
* Special sizes upon request
BASE TRUNKING H PART NO.
Standard 28 ST20028
Large capacity 38 ST20038
Base Trunking
Junction Boxes
Carpet trim for Junction box
JUNCTION BOX TYPE PART NO.
Crossover Adjustable ST20138
Elbow Adjustable ST20238
THE SUPERLIM JUNCTION BOXES HAVE BEEN SPECIFICALLY DESIGNED TO BE USED
WITH THE SUPERSLIM 23MM TRUNKING. FLOORBOXES CANNOT BE USED WITH THIS
SYSTEM. USE SUPERSLIM SINGLE OUTLET
Straight/Floor box Adjustable ST20338
h = Adjustable height range 60 to 85mm
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
6 15.9.14
COUPLER H PART NO.
Superslim 23 ST20523
Standard 28 ST20528
Large capacity 38 ST20538
END CAP H PART NO.
Superslim 23 ST20623
Standard 28 ST20628
Large capacity 38 ST20638
VERTICAL BEND H PART NO.
Superslim 23 ST20723
Standard 28 ST20728
Large capacity 38 ST20738
3 COMPARTMENT FLOOR BOX
(EMPTY) PART NO.
N/A ST20400
USE IN CONJUNCTION WITH THE ADJUSTABLE JUNCTION BOXES ST20338.
FLOORBOXES ARE SUPPLIED WITH ALL FIXINGS AND EDGE TRIMMINGS.
ACCESSORY MOUNTING PLATES MUST BE ORDERED SEPARATELY.
SINGLE OUTLETS PART NO.
Steel blank CL58186
USE IN CONJUNCTION WITH THE ADJUSTABLE JUNCTION BOXES ST20338.
FLOORBOXES ARE SUPPLIED WITH ALL FIXINGS AND EDGE TRIMMINGS.
ACCESSORY MOUNTING PLATES MUST BE ORDERED SEPARATELY.
Dome lid CL1075GRY
Plastic blank CL1575GRY
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
7 15.9.14
OUTLET BODY
FOR IN-SCREED H PART NO.
Standard 30-45 ST100
Superslim 26-40 ST50
HEIGHT ADJUSTMENT ABOVE TRUNKING
SINGLE OUTLET BOX FOR
CONDUIT INSTALLATION PART NO.
N/A ST200
KNOCKOUTS: 23MM
HEIGHT ADJUSTMENT: 60 TO 75MM
USE SINGLE OUTLET 24MM SPACERS (PART NO. CL55528) FOR THICKER SCREED
SPACER PART NO.
24mm Spacer CL55528
ACCESSORY PLATES PART NO.
1 Gang S.O CL10021
Punched for LJ CL20021
Blank plate CL30021
Hole cutters and template data sheets are available
from Ackermann on request.
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
8 15.9.14
Notes:
- Standard colours are Anodised or Black
- **Denotes colour: AN (anodised), BK (black)
- Covers also available in Grey (GY) these can be used with anodised duct body for contrast
Our new stylish skirting duct range is a simple
solution of distributing power, data &
communication around the entire workspace.
Our skirting duct comes with all the
accessories you will need for an easy
installation.
SOME OF THE FEATURES INCLUDE:
- Available in two channels
- Easy installation
- Standard colours are natural anodised or
black. Other colours upon request, price on
application
- Accommodates standard bakelite with 84mm
centres fixing holes
SKIRTING DUCT ORDERING INFORMATION
PART NO. DESCRIPTION
SK35D** Skirting Duct 150mm x 35mm - 2.4m lengths
SKC** Skirting Cover 150mm high - 1.2m lengths (suits 35mm & 50mm deep)
SK35E** 35mm SK End cap
SK35I** 35mm SK Internal Cnr
SK35X** 35mm SK External Cnr
SKGPO Accessory box suit wall duct with spring clip & aluminum cover plate
SK50D** Skirting Duct 150mm x 50mm - 2.4m lengths
SK50E** 50mm SK End Cap
SK50I** 50mm SK Internal Cnr
SK50X** 50mm SK External Cnr
SKGPO Accessory box suit wall duct with spring clip & aluminum cover plate
SKIRTING DUCT
Extruded aluminium
External cap
Double power
outlet CMS Starter
Internal corner
Accessory box
End cap
Skirting duct (outlets sold separately)