● From individual LEDs to complete packaged solutions ● Widest variety of highest quality LEDS in sizes and colors; off the shelf ● Assemblies incorporate LEDs packaged to meet critical design requirements ● Custom engineering CML LED Lighting Solutions Include: Click for more information • Bright•Pipe™ Optical Lightpipes • Surface Mount LEDs • LEDs Discrete • LED Assemblies (Circuit Board) Chicago Miniature Lamp offers a wide variety of standard and custom solid state lighting products. All solid state products utilize Light Emitting Diodes (LEDs) as their source of light. LED technology has evolved since the early 1900s to a point where the LEDs are possibly the single most reliable source of light available today. Today, LEDs are offered in a vast array of package configurations to suit nearly any application. LEDs have a number of unique advantages and disadvantages depending on your application. An LED typically consists of four components: a lead frame, a dice and a fine wire bond, all encapsulated in an epoxy body. Because this construction does not exhibit any movable or loose components, it is considered to be "solid state". This means that LEDs are typically very reliable under shock and vibration conditions. The light emitting by an LED is considered monochromatic, or having only one color. LEDs are offered in three basic colors: red, green and yellow, although variations of these three basic colors are also available. The light emitted by an LED is always in a single color or wavelength. To some this is an advantage because the light output does not require filtering if red, gree or yellow light are required. To others, output of a single wavelength of light is a disadvantage if they are looking for white light. LEDs have relatively limited light outputs when compared to other light sources available today. Therefore, LEDs are typically used as status indicators and for backlighting small areas. LEDs are also a fairly unidirectional light source, having somewhat limited viewing angles when compared to other lamp types. To some, this is an advantage, to others a disadvantage. One of the biggest advantages of LEDs is that they are very energy efficient when compared to other available light sources. LEDs typically operate between 1 mA and 30 mA. Finally, LEDs have extremely long lives compared to other light sources. Lives of 10 to 12 years are typical, which makes LEDs the ideal light source in applications where lamp replacement is impossible.
348
Embed
CML LED Lighting Solutions Include - Steven Engineeringstevenengineering.com/Tech_Support/PDFs/27MAIN.pdf · CML LED Lighting Solutions Include: Click for more information ... MATERIAL:
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Search by Part Number:
Search for a Rep/Distributor
● From individual LEDs to complete packaged solutions
● Widest variety of highest quality LEDS in sizes and colors; off the shelf
● Assemblies incorporate LEDs packaged to meet critical design requirements
● Custom engineering
CML LED Lighting Solutions Include:Click for more information
• Bright•Pipe™ Optical Lightpipes• Surface Mount LEDs• LEDs Discrete • LED Assemblies (Circuit Board)
Chicago Miniature Lamp offers a wide variety of standard and custom solid state lighting products. All solid state products utilize Light Emitting Diodes (LEDs) as their source of light. LED technology has evolved since the early 1900s to a point where the LEDs are possibly the single most reliable source of light available today. Today, LEDs are offered in a vast array of package configurations to suit nearly any application.
LEDs have a number of unique advantages and disadvantages depending on your application. An LED typically consists of four components: a lead frame, a dice and a fine wire bond, all encapsulated in an epoxy body. Because this construction does not exhibit any movable or loose components, it is considered to be "solid state". This means that LEDs are typically very reliable under shock and vibration conditions.
The light emitting by an LED is considered monochromatic, or having only one color. LEDs are offered in three basic colors: red, green and yellow, although variations of these three basic colors are also available. The light emitted by an LED is always in a single color or wavelength. To some this is an advantage because the light output does not require filtering if red, gree or yellow light are required. To others, output of a single wavelength of light is a disadvantage if they are looking for white light.
LEDs have relatively limited light outputs when compared to other light sources available today. Therefore, LEDs are typically used as status indicators and for backlighting small areas. LEDs are also a fairly unidirectional light source, having somewhat limited viewing angles when compared to other lamp types. To some, this is an advantage, to others a disadvantage. One of the biggest advantages of LEDs is that they are very energy efficient when compared to other available light sources. LEDs typically operate between 1 mA and 30 mA. Finally, LEDs have extremely long lives compared to other light sources. Lives of 10 to 12 years are typical, which makes LEDs the ideal light source in applications where lamp replacement is impossible.
D E S C R I P T I O N A N D F E A T U R E S
7512B8 Series Bright�Pipes™ Flexpipe™ Fiber-Optic Lightpipe
1-7
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
AR E AS T AY OUT
LC
P A NE L L E NS
S IDE V IE W
-.000+.003
(2 P LC S )
Ø.156
F R ONT V IE W
B OAR D R E F ..092 P .C .
F R ONT P ANE L C LE AR P OLY C AR B ONAT EMAT E R IAL:
B LAC K LE XANB AS E MAT E R IAL:
1.033
2.236
.992
.250
.740
.293
1.084.648
.552
.200
R E F .1.453
R E F .1.253
2.570±.020
.060
.552
8 P LC S ..100 S Q.
T Y P ..200
.178
.200
.400
•Flexible optical lightpipe with precision fiberoptics for longdistance SMT LED to lens.
•Eliminates need for precision mechanical alignment ofcomponents to panel.
•7512B8 is designed for use with CMD67-21 and 67-22series Bright Chip LEDs.
•Precision engineered with ray tracing for bright, opticallyprecise even indication and attractive appearance.
•ESD protection from circuitry for exceptional reliability.•High contrast and wide viewing angle for greater
visibility.•Parts inserted after reflow to permit LED pad inspection
before assembly.•Large lens provides high visibility.•Water clear optics for variety of LED colors.
All dimensions in inches.
Mounting hole pattern on page 1-X7.
Note:•Due to their complex nature, all Flexpipe™
pads must be custom designed to meet yourapplication needs.
D E S C R I P T I O N A N D F E A T U R E S
6200T Series Bright�Angle™ Right Angle Sub-Miniature SMT LED Assemblies
1-48
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
•Tape and reel packaged for high-speedpick-and-place installation.
•Packaged 1000 pieces per reel.•Convection and vapor-phase reflow compatible.•Compact form enables high density placement.•Ideal for backlighting applications.•Wide angle view.•Direct-view optics provide smooth
uniform appearance.•High output.•Low current (2mA).•Built-in resistor for 5V and 5V low current.•100K+ hour MTBF.•Easy post-reflow solder joint inspection.•No adhesives.•UL94V-O rated housing of black
polyphenylen sulfide.
Solder pad geometry on page 1-X1.
Part
Number Color
Lens
Color
Rated
Current
(mA)
Luminous
Intensity
Typ. (mcd)
Forward
Voltage Typ.
(V)
Forward
Voltage Max.
(V)
Peak
Wavelength
(nm)
6200T1
6200T3
6200T5
6200T7
6200T1LC
6200T5LC
6200T7LC
6202T1-5V
6202T3-5V
6202T5-5V
6202T1-5VLC
6202T3-5VLC
6202T5-5VLC
Red
Amber
Green
Yellow
Red
Green
Yellow
Red
Amber
Green
Red
Amber
Green
10
10
10
10
2.0
2.0
2.0
10
10
10
3.5
3.5
3.5
5.0
5.0
4.0
3.8
.5
1.2
.5
5.0
5.0
5.0
2.0
4.0
2.0
2.2
2.0
2.3
2.2
1.8
1.8
1.9
5.0
5.0
5.0
5.0
5.0
5.0
3.0
3.0
3.0
3.0
2.2
2.2
2.7
6.0
6.0
6.0
6.0
6.0
6.0
635
603
565
585
635
565
583
635
565
583
635
565
583
Red
Amber
Green
Yellow
Red
Green
Yellow
Red
Amber
Green
Red
Amber
Green
.011±.002
.049±.005
.134±.012
.119±.005
.180±.003
.240±.005
.173±.003
.170
.185.236.243
+
T E R MINAL
LE D
ANODE (+)
ANODE (+)
All dimensions in inches .
D E S C R I P T I O N A N D F E A T U R E S
6255T Series Bright�Angle™ Sub-Miniature SMT LED Assemblies
1-49
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
•Tape and reel packaged for high-speed pick-and-placeinstallation.
•Packaged 750 pieces per reel.•Convection and vapor-phase reflow compatible.•Compact form enables high density placement.•Ideal for backlighting applications.•Wide angle viewing.•Direct-view optics provide smooth uniform
appearance.•High output.•Low current (2mA).•Built-in resistor for 5V and 5V low-current.•Perfect drop-in replacement for Dialight 591 series prism.•100K+ hour MTBF•Easy post-reflow solder joint inspection.•No adhesives.•UL94V-O rated housing of black polyphenylen sulfide.•Solder pad geometry on page 1-X2.
•Precision engineered with ray tracing for bright, opticallyprecise even indication and attractive appearance.
•ESD protection from circuitry for exceptional reliability.•High contrast and wide viewing angle for greater visibility.•Parts inserted after reflow to permit LED pad inspection
before assembly.•Optimized for use with Bright�Chips™ CMD67-21 Series.•7101P features large square lens (.16" x .16") for
high visibility.•7101R features low profile (.16" x .07"h) rectangular
lens ideal for height-constrained applications.•One lightpipe per port.
D E S C R I P T I O N A N D F E A T U R E S
7101P/R Series Bright�Pipes™ Optical Lightpipes FOR RJ-STYLE JACKS
1-16
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
*M=locking press-in pin for .062" boards;T=double sided adhesive (supplied separately)
Example: To order Series 7101P Bright�Pipes with 6 portsand press-in pin mounting, you would order 7101P6-M.
Mounting hole pattern on page 1-X5.
All dimensionsin inches.
CL
CLCL
CL
.100.300
1.280
.430
.120
WILL SNAP INTOSTANDARD BOARDTHICKNESS
.110 .220
DIM A
DIM B
OPTICALLIGHTPIPESURFACE(TYP.4)
.630.710
.110 .220
DIM B
DIM A
.580.620
OPTICALLIGHTPIPESURFACE(TYP.4)
7101P5/7101R5
7101P6/7101R6
7101P8/7101R8
7101P7/7101R7
M or T
M or T
M or T
M or T
5
8
7
6
2.75
3.30
3.85
4.40
2.20
2.75
3.30
3.85
Model Mounting Ports DIM A DIM B
7101P1/7101R5
7101P2/7101R6
7101P4/7101R8
7101P3/7101R7
M or T
M or T
M or T
M or T
1
4
3
2
.550
1.10
1.65
2.20
-
.550
1.10
1.65
Ports Dim A Dim B Dim C Dim D Dim E Dim F Dim G
5
8
7
6
1
4
3
2
2.75
3.30
3.85
4.40
.550
1.10
1.65
2.20
N/A
1.001.552.10
2.653.20
3.754.30
N/A.550
1.101.65
2.202.75
3.303.85
.175
.175
.175
.175
.175N/A
N/AN/A
N/A
.550
1.101.65
1.65N/A
N/AN/A
N/A
N/A
N/AN/A
N/A.925
.925
.925
N/A
N/AN/AN/A
N/A1.65
1.651.65
.060
D E S C R I P T I O N A N D F E A T U R E S
7102P/R Series Bright�Pipes™ Optical Lightpipes for RJ-Style Jacks
1-17
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
•Precision engineered with ray tracing for bright, opticallyprecise even indication and attractive appearance.
•ESD protection from circuitry for exceptional reliability.•Optimized for use with Bright�Chips™ SMT LEDs.•High contrast and wide viewing angle for greater visibility.•Parts inserted after reflow to permit LED pad inspectionbefore assembly.
•Two lightpipes per port.•7102P features large square lens (.16"x.16") forhigh visibility.
•7102R features low profile (.16"x.07"h) rectangularlens ideal for height-constrained applications.
Mounting hole pattern on page 1-X5.
7102P5/7102R5
7102P6/7102R6
7101P8/7102R8
7101P7/7102R7
M or T
M or T
M or T
M or T
5
8
7
6
2.75
3.30
3.85
4.40
2.20
2.75
3.30
3.85
Model Mounting Ports DIM A DIM B
7102P1/7102R1
7102P2/7102R2
7102P4/7102R4
7102P3/7102R3
M or T
M or T
M or T
M or T
1
4
3
2
.550
1.10
1.65
2.20
-
.550
1.10
1.65
All dimensions in inches.
.200 TYP. .350 TYP.
.710
.060 DIM B
DIM ALENS SURFACE
.630
.010.220
.300
1.280
.430
THICKNESSSTANDARD BOARDWILL SNAP INTO
.100
.120
.160
CLCL LC LC
.160 TYP.
HOUSING:WHITE OPAQUETHERMOPLASTICUL94 V-2
N.A.N.A.N.A.N.A..175
3.8503.3002.7502.2001.6501.100
.550N.A.
.925
.925
.925
N.A.
N.A.N.A.N.A.
.175
.175
.175
.175
1.6501.6501.650N.A.N.A.N.A.N.A.N.A.DIM GDIM FDIM EDIM D
-
4.3003.7503.2002.6502.1001.5501.000
DIM C
N.A.N.A.N.A.
1.6501.6501.100
.550N.A.
4.403.853.302.752.201.651.10
.55
87654321
DIM BP OR T S DIM A
•Precision engineered with ray tracing for bright, opticallyprecise even indication and attractive appearance.
•ESD protection from circuitry for exeptional reliability.•Designed for use with Bright�Chips™ LEDs.•High contrast and wide viewing angle for greater visibility.•Available in a variety of colors for added contrast
and aesthetics.•Parts inserted after reflow to permit LED pad inspection
before assembly.•Available in UL94V-O•Low profile for height constrained applications.•Large lens provides high visibility.•All 3 models have matching center lines to allow for
side-by-side mounting.•All dimensions in inches (mm).
D E S C R I P T I O N A N D F E A T U R E S
7511A85, 7511A62, 7511B11 Series Bright�Pipes™ Optical Lightpipes
1-18
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
(3 P LS .)T E XT UR E F INIS H
.066.357
.095
.100
.200
.014
3X .122 DIA
7° T Y P .
.095
.216
.561
2X
.055±.003
1.010
.226
.175
±.003
(2 P LC S .)T E XT UR E F INIS H
.200
.100
.226.357.095
.782
.014
.068±.003
.095
2X .122 DIA.
7° T Y P .
.175
.216
.066±.003
P IN 1
.014
.068±.003.553
.095
.100
.095
.247.125
.175
.161
.066±.003
.122
24°
T E XT UR EF INIS H
7511A85
7511A62 7511B11
D E S C R I P T I O N A N D F E A T U R E S
7511C & 7512D Series Bright�Pipes™ Optical Lightpipes
1-9
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
•Precision engineered with ray tracing for bright, optically preciseeven indication and attractive appearance.
•ESD protection from circuitry for exceptional reliability.•High contrast and wide viewing angle for greater visibility.•Available in a variety of colors for added contrast and aesthetics.•Parts inserted after reflow to permit LED pad inspection before assembly.•Compliance to UL94V-O•Low profile for height constrained applications.•Large lens provides high visibility.•7511C features 3mm dome and is designed for use with 7012X Bright�Chips™ SMT LEDs.•7512D is designed for use with 67-21 and 67-22 Bright Chip LEDs.
Mounting hole pattern on page 1-X4.
All dimensions in inches.
.183
CHARMILLE #24MATTE FINISH
.415
.094
.490
.140
.360
.310Ø.120
.154
.130
.080
.120
.070
.100
.030
.614
(12).472
.200
.106
Ø.140
.506
.161
.210 .170
(2).080
R .750
7512D
7511C
7512D7 YELLOW
7512D5 GREEN
7512D2 CLEAR
7512D1 RED
7511C2 CLEAR
7511C7 YELLOW
7511C1 RED
7511C5 GREEN
MODEL OUTPUT COLOR
•Precision engineered with ray tracing for bright, optically preciseeven indication and attractive appearance.
•ESD protection from circuitry for exceptional reliability.•High contrast and wide viewing angle for greater visibility.•Parts inserted after reflow to permit LED pad inspection
before assembly.•Optimized for use with Bright�Chips™ SMT LEDs.•7512A5 can be provided in a 1 to 6 position array.•7511F2 is designed for use with 7016X Series Bright Chip LEDs.•7512A5 is designed for use with 67-21 Series Bright Chip LEDs.
Mounting hole pattern on page 1-X5.
D E S C R I P T I O N A N D F E A T U R E S
7511F2/7512A5-1 THRU 6 Series Bright�Pipes™ Optical Lightpipes
1-15
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
1
2
3
4
5
6
1
2
4
6
8
10
7511F2 7512A5-1 THRU 6
All dimensions in inches.
.040
.414
.275 R E F.260
.535
2.674
.318
.200
2.260
2.467
.093
.660
T Y P ..100 S Q.
(T Y P .).081±.002
.250
.125 T Y P ..100
.166.207
.080
.250
.163
.081
.951
.140
.065LE D CL
.080
.590
PART NUMBER NO. OF PORTS NO. OF POSITIONS
7512A5-1-A
7512A5-2-A
7512A5-3-A
7512A5-4-A
7512A5-5-A
7512A5-6-A
•Precision engineered with ray tracing for bright, optically preciseeven indication and attractive appearance.
•ESD protection from circuitry for exceptional reliability.•High contrast and wide viewing angle for greater visibility.•Available in a variety of colors for added contrast and aesthetics.•Parts inserted after reflow to permit LED pad inspection before assembly.•Compliance to UL94V-O•Low profile for height constrained applications.•Large lens provides high visibility.•7511H2 designed for use with 7012X SMT LED.
Mounting hole pattern on page 1-X4.
D E S C R I P T I O N A N D F E A T U R E S
7514B/7511G Series Bright�Pipes™ Optical Lightpipes
1-8
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
All dimensions in inches.
.220
.378
.565±.010
.328
.438
.200
.055
.120
CHARMILLE #24MATTE FINISHSPHERICAL END
.110 TYP.
C ML
.236 REF.
.136
.200
MODEL OUTPUT COLOR
7511G2
7511G1
7511G5
7511G7
DIFFUSED TRANSLUCENT
CLEAR RED TINT
CLEAR GREEN TINT
CLEAR YELLOW
7511G
7514B2-2
7514B2-4
•Precision engineered with ray tracing for bright, optically preciseeven indication and attractive appearance.
•ESD protection from circuitry for exceptional reliability.•Optimized for use with Bright�Chips™ SMT LEDs.•High contrast and wide viewing angle for greater visibility.•Available in a variety of colors for added contrast and aesthetics.•Parts inserted after reflow to permit LED pad inspection before assembly.•Low profile for height constrained applications.•Large lens provides high visibility.•7513D2-S is designed for use with 67-21 and 67-22 Series Bright Chip LEDs.
Mounting hole pattern on page 1-X5.
D E S C R I P T I O N A N D F E A T U R E S
7513D2-S Series Bright�Pipes™ Optical Lightpipes
1-11
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
.200
.170
.161
.506
Ø.140
R .750
.080
.210
.106 ±.010
.070
.140
All dimensions in inches.
•Precision engineered with ray tracing for bright, optically preciseeven indication and attractive appearance.
•ESD protection from circuitry for exceptional reliability.•Optimized for use with Bright�Chips™ SMT LEDs.•High contrast and wide viewing angle for greater visibility.•Available in a variety of colors for added contrast and aesthetics.•Parts inserted after reflow to permit LED pad inspection before assembly.•Low profile for height constrained applications.•Large 2.5 x 7.5 mm surface provides high visibility.•Ideal for bar graph displays.•7610D2 is designed for use with 7012X Series Bright Chip LEDs.
Mounting hole pattern on page 1-X4.
D E S C R I P T I O N A N D F E A T U R E S
7610D2 Series 2.5 x 7.5 Bright�Pipes™ Optical Lightpipes
1-12
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
.125 T Y P . (2)CL LE D
.307CL
CL
.305
.107.130
.800
.775
.450
.107
.060
T O DIME NS ION S HOWNC HAR MILLE #24MAT T E F INIS H
.200
.705
.047
All dimensions in inches.
.083±.002
.043
.055
T Y P .ALL AR OUND.100 MIN.
E IG HT B OR DE R ING S UR F AC E S .ON V IE WING S UR F AC E S ANDC HAR MILLE #24 F INIS H
T Y P ..095
.259
.078 T Y P .
.257
.275
.355
.225
.130 T Y P .
.552
.225
CLLE D
.197
•Precision engineered with ray tracing for bright, optically preciseeven indication and attractive appearance.
•ESD protection from circuitry for exceptional reliability.•Optimized for use with Bright�Chips™ SMT LEDs.•High contrast and wide viewing angle for greater visibility.•Available in a variety of colors for added contrast and aesthetics.•Parts inserted after reflow to permit LED pad inspection before assembly.•Low profile for height constrained applications.•Large lens provides high visibility.•7612D2-2 is designed for use with 7020X Series Bright Chip LEDs.
Mounting hole pattern on page 1-X5.
D E S C R I P T I O N A N D F E A T U R E S
7612D2-2 Series 2mm x 5mm Dual Position Bright�Pipes™ Optical Lightpipes
1-13
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
All dimensions in inches.
•Precision engineered with ray tracing for bright, optically preciseeven indication and attractive appearance.
•ESD protection from circuitry for exceptional reliability.•High contrast and wide viewing angle for greater visibility.•Available in a variety of colors for added contrast and aesthetics.•Parts inserted after reflow to permit LED pad inspection before assembly.•Low profile for height constrained applications.•Large lens provides high visibility.•7612D2-3 is designed for use with 7020X Series Bright Chip LEDs.
Mounting hole pattern on page 1-X5.
D E S C R I P T I O N A N D F E A T U R E S
7612D2-3 Series 2mm x 5mm Triple Position Bright�Pipes™ Optical Lightpipes
1-14
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Detail
.083 R E F .
DE T AIL X T Y P .
.083 R E F .
DE T AILS E E
T Y P .ALL AR OUND.100 MIN.
T WE LV E B OR DE R ING S UR F AC E S .ON V IE WING S UR F AC E S ANDC HAR MILLE #24 F INIS H
T Y P ..095
.580
.225 T Y P . R E F .
.225 T Y P .
.552
T Y P ..130
T Y P ..078
.259
.257
.055
.043
.275
CLLE D
(5).197
All dimensions in inches.
ïAvailable in Red, Orange, Yellow, Green
and Pure Green.
ïRight angle mounting.
ïCompact size: 3.00mm x 1.00mm x 2.00mm
ïHigh brightness
Surface Mount Technology
ïTape and reel packaged for high-speed
autoinsertion.
ïConvection and vapor-phase reflow compatible.
ïCompact form enables high density placement.
ïPackaged 3000 pieces per reel.
Leading Edge LED Optoelectronic Performance
ïConsistent high brightness.
Exceptional Reliability
ïStringent process controls assure quality.
ïExtensive qualification testing to meet
strictest requirements.
ïDesigned to permit easy post-reflow solder
joint inspection.
ïSolder pad geometry on page 1-X2.
D E S C R I P T I O N A N D F E A T U R E S
CMD11504 Series Bright Angleô Right Angle Surface Mount LED
1-46
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central Avenue
Hackensack, New Jersey 07601
Tel: 201-489-8989 ï Fax: 201-489-6911CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
592580605630660
2.42.5
2.52.42.0
1.92.22.2
1.91.7
65100100 65100
65.03.23.250.013.2
16.01.6
1.616.06.6
YellowYellowOrangeRedRed
(V)Max.
(V)Typ.
(mcd)Typ.
(mcd)Min.
(degrees)Angle
Viewing
(nm)Wavelength
Peak Forward VoltageLuminous Intensity @20ma
(Dice)Source
Part Number
CMD11504URCMD11504FRCMD11504ACMD11504YCMD11504FY
ColorPackage
Water ClearWater ClearWater ClearWater ClearWater Clear
555560
2.52.5
2.12.1
100100
2.616.0
1.33.0
Pure GreenGreenCMD11504G
CMD11504PGWater ClearWater Clear
609560
2.52.4
2.11.9
10065
2.665.0
1.316.0
Pure GreenOrangeCMD11504FA
CMD11504PGWater ClearWater Clear
OUTPUTLIGHT
ANODE(+)
REINFORCEMENTSOLDER PAD FOR
MARKPIN CONNECTION
(-)CATHODE
0.45
1.00
2.00
1.00
TYP.(2) 0.30
TYP.(2) 0.30
1.00
2.00
3.00
All dimensionsin mm.
SUBSTRATE
PLASTIC
LED DIE
•Available in Red, Yellow and Greenand Pure Green.
•Right angle mounting.•Compact size: 2.10mm x 1.00mm x 0.60mm
Surface Mount Technology
•Tape and reel packaged for high-speedautoinsertion.
•Convection and vapor-phase reflow compatible.•Compact form enables high density placement.•Packaged 4000 pieces per reel.
Leading Edge LED Optoelectronic Performance
•Consistent high brightness.
Exceptional Reliability
•Stringent process controls assure quality.•Extensive qualification testing to meet
strictest requirements.•Designed to permit easy post-reflow solder
joint inspection.
•Solder pad geometry on page 1-X2.
D E S C R I P T I O N A N D F E A T U R E S
CMD11505 Series Bright�Angle™ Right Angle Surface Mount LED
1-47
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
-40 to +100
57011.77.01302.8
2.1
-30 to +854
60
70C lear
Y ellowC MD11505P YC MD11505P G
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorP ower Diss ipation (mW)P eak F orward C urrent Max. (mA)R everse V oltage (IR =100µA) (V )Operating T emperature (°C )S torage T emperature (°C )F orward V oltage T yp. (IF =20mA)F orward V oltage Max. (IF =20mA)
Luminous Intens ity Min. (IF =20mA)
P eak Wavelength (IF =20mA)
Diffused/Non-Diffused
V iewing Angle (degrees)
Luminous Intens ity T yp. (IF =20mA)
G reen
C lear70
604
-30 to +85-40 to +100
2.1
2.81303.86.4560
Diffused
R ated C urrent (mA) 2020Lead S older T ime @ 260°C (seconds) 55
-40 to +100
66011.77.01302.3
1.7
-30 to +854
60
57.5C lear
R edC MD11505UR
Diffused
205
2.10
0.10 0.10
0.60
LE D C HIP
1.70
0.50
1.00
P LAS T ICS UB S T R AT E
0.30 0.30
C AT HODE
ANODE
P IN C ONNE C T ION MAR K
All dimensionsin mm.
D E S C R I P T I O N A N D F E A T U R E S
CMD12-21 Bright�Angle™ Right Angle Surface Mount LED
1-45
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
A B S O L U T E M A X I M U M R A T I N G S
570
570
585
640
660
2.8
2.8
2.8
2.82.4
2.1
2.1
2.0
2.01.7
120
120
120
120
120
14.9
8.8
3.0
5.0
24.0
9.0
4.4
1.5
3.0
14.0
G reen
G reen
Y ellow
H.E . R ed
R ed
(V )Max.
(V )T yp.
(mcd)T yp.
(mcd)Min.
(degrees)Angle
V iewing
(nm)Wavelength
P eakF orward V oltageLuminous Intens ityE mittedC olor
P art Number
C MD12-21S R C /T R 8
C MD12-21V R C /T R 8
C MD12-21V Y C /T R 8
C MD12-21V G C /T R 8
C MD12-21UG C /T R 8
C olorLens
C lear
C lear
C lear
C lear
C lear
620
590
2.8
2.8
2.1
2.1
120
120
71.0
60.0
43.0
36.0
S unset Orange
S uper Y ellowC MD12-21UY C /T R 8
C MD12-21US OC /T R 8
C lear
C lear
Green H.E.Red Yellow Red UnitsPower Dissipation...................................................100...............105...................85..................105.............mWStorage/Operating Temperature...........................-30 to +90....-30 to +90........-30 to +90.........-30 to +90..........°CPeak Forward Current (1µs @ 10% duty cycle)...........150...............150..................150.................150..............mAReverse Voltage (IR=100µA)....................................4.0................4.0...................4.0..................4.0................VLead Solder Time @ 260°C........................................5...................5......................5....................5........SecondsAverage Forward Current..........................................30.................30....................30...................30..............mA
3.00
1.00
2.00
2.00
0.88 0.45R AD.
ANODE
C AT HODE
R E AR V IE W
0.50 0.50
C AT HODEMAS K
1.00
0.40 0.40
1.00 R
All dimensionsin mm.
Surface Mount Technology
•Tape and reel packaged for high-speedautoinsertion.
•Convection and vapor-phase reflow compatible.•Compact form enables high density placement.•Packaged 2000 pieces per reel.
Leading Edge LED Optoelectronic Performance
•Consistent high brightness.•Integral lensing for narrow angle light dispersion.•Bi-color available.
Exceptional Reliability
•Stringent process controls assure quality.•Extensive qualification testing to meet
strictest requirements.•Designed to permit easy post-reflow solder
joint inspection.
•Solder pad geometry on page 1-X2.
•Precision engineered with ray tracing for bright,optically precise even indication and attractiveappearance.
•ESD protection from circuitry for exceptionalreliability.
•Designed for use with 7016X Series BrightChip LEDs.
•High contrast and wide viewing angle forgreater visibility.
•Large lens provides high visibility.•All dimensions in inches (mm).
Mounting hole pattern on page 1-X5.
D E S C R I P T I O N A N D F E A T U R E S
7511A87 Series Bright�Pipes™ Optical Lightpipes
1-19
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
B OT T OM V IE W
Ø.150
.150
.150
T Y P ..115
.258
.294
.133
(.182)
(.217)
"A"DIM
F INIS H #24C HAR MILLE
All dimensions in inches.
NO.P AR T
"A"DIM
7511A87-500 .500
.450
.400
.350
.300
.250
7511A87-450
7511A87-400
7511A87-350
7511A87-300
7511A87-250
D E S C R I P T I O N A N D F E A T U R E S
7611D2-L/7611D2-S Series Bright�Pipes™ Optical Lightpipes
1-20
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
•Precision engineered with ray tracing for bright,optically precise
even indication and attractive appearance.•ESD protection from circuitry for exceptional
reliability.•High contrast and wide viewing angle for greater
visibility.•Available in a variety of colors for added contrast
and aesthetics.•Panel mounting.•Both 7611D2-L and -S light pipes are designed for
use with 7016X series Bright Chip LEDs.
Ø.250
R1.000
.380
.060
Ø.187+.005�
-.000
.120 REF.
VIEWING SURFACE
TEXTURE FINISH
#24
Ø.176
LED.025 REF.
.080 REF.
PC BOARD
All dimensions in inches.
7611D2-L
7611D2-S
Ø.160
Ø.250
R1.000
.960
.060
Ø.187+.005�
-.000
.025 REF.
.080 REF.
LED
PC BOARD.120 REF.
VIEWING SURFACE
TEXTURE FINISH
#24
All dimensions in inches.
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
7512F Series Bright ★ Pipes™ Flexpipe™ Fiber-Optic Lightpipe
D E S C R I P T I O N A N D F E A T U R E S
• Flexible optical lightpipe with precision fiberoptics for long distanceSMT LED to lens.
• Eliminates need for precision mechanical alignment of componentsto panel.
• 7512F is designed for use with CMDA19 series Bright Chip LEDs.• Precision engineered with ray tracing for bright, optically precise
even indication and attractive appearance.
• ESD protection from circuitry for exceptional reliability.• High contrast and wide viewing angle for greater visibility.• Parts inserted after reflow to permit LED pad inspection before
assembly.• Large lens provides high visibility.• Water clear optics for variety of LED colors.
1
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product.
1-200
Series Number Dim A length (in mm)7512FPR- 305 (standard model)7512FPR- XXX*
*Note: • Standard model length is 305 mm.Product is available in lengths of 100 - 1800 mmin increments of 25 mm. Replace the XXX withthe length of your choice.Minimum order quantities may apply,
Surface Mount Technology
•Tape and reel packaged for high-speed autoinsertion.•Convection and vapor-phase reflow compatible.•Compact form enables high density placement.•Packaged 2000 per reel.
Leading Edge LED Optoelectronic Performance
•Consistent high brightness.
D E S C R I P T I O N A N D F E A T U R E S
CMD67-21UWC Series White SMT LEDs
1-21
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
All dimensionsin inches.
Exceptional Reliability
•Stringent process controls assure quality.•Extensive qualification testing to meet strictest
requirements.•Designed to permit easy post-reflow solder joint
inspection.
•Solder pad geometry on page 1-X2.
C MD67-21UWC /T R 8
Non-Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 10% duty cycle) (mA)
Diffus ion
V iewing Angle (degrees)
White
C lear20
3.64.0120170
-
475100120
-30 to +80-40 to +100
100R everse V oltage (IR =100µA) (V ) 5.0
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5
T Y P ..031
.138±.008
.020±.004
.006
.075±.008
.110±.008 .087±.004
C AT HODE .094
.122±.008
Surface Mount Technology
•Tape and reel packaged for high-speed autoinsertion.•Convection and vapor-phase reflow compatible.•Compact form enables high density placement.•Packaged 2500 pieces per reel.
Leading Edge LED Optoelectronic Performance
•Consistent high brightness.
Exceptional Reliability
•Stringent process controls assure quality.•Extensive qualification testing to meet strictest requirements.•Designed to permit easy post-reflow solder joint inspection.
•Solder pad geometry on page 1-X2.
D E S C R I P T I O N A N D F E A T U R E S
7010X Series SMT LEDs 1206 Package Size
1-35
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
0.60
0.90
1.50
1.60
1.80
2.00
1.50
3.00
2
2
1
1
C AT HODEMAR K
LE D C HIPLE NS
All dimensionsin mm.
17.012.07.59.0
70
-40 to +100-30 to +85
6070
660
-
6.02.01.7
20C lear
R ed7010X11
70
-40 to +100-30 to +85
7570
570
-
6.02.52.1
20C lear
Y ellow7010X7
70
-40 to +100-30 to +85
7570
560
-
3.02.5
2.120
C lear
G reen7010X5
70
-40 to +100-30 to +85
7570
605
-
5.02.52.2
20C lear
Orange7010X37010X1
Non-Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 10% duty cycle) (mA)
P ower Diss ipation (mW)Operating T emperature (°C )
12
0.30
0.50
1.30+0.20/-0.10
TERMINATION 1.60
R 0.30 TYP.
1.70
CATHODE MARK
2.00
1.60
2.30
3.00
Surface Mount Technology
•Tape and reel packaged for high-speed autoinsertion.•Convection and vapor-phase reflow compatible.•Compact form enables high density placement.•Packaged 4000 pieces per reel.
Leading Edge LED Optoelectronic Performance
•Consistent high brightness.
Exceptional Reliability
•Stringent process controls assure quality.•Extensive qualification testing to meet strictest requirements.•Designed to permit easy post-reflow solder joint inspection.
•Solder pad geometry on page 1-X1.
D E S C R I P T I O N A N D F E A T U R E S
7017X Series Surface Mount LEDs 0603 Package Size
1-24
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
All dimensionsin inches.
.048
.043
.028
.008
.011
.031
.063
LED DIE
MARKS
CATHODE
.012.012
POLARITY MARK
ANODE (+)
CATHODE (-)
3.42.43.465
60
-40 to +100-30 to +85
7070
580
-
2.02.82.2
20C lear
Y ellow7017X13
60
-40 to +100-30 to +85
7070
555
-
1.42.82.1
20C lear
G reen7017X15
60
-40 to +100-30 to +85
7070
605
-
2.02.8
2.220
C lear
Orange7017X3
100
-40 to +100-40 to +85
8170
609
-
162.41.9
20White
Orange7017X237017X21
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 10% duty cycle) (mA)
Diffus ion
V iewing Angle 20 1/2 (degrees)
R ed
White20
1.92.41650
-
6307081
-40 to +85-40 to +100
100
Diffused Diffused Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5 4 4 45
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 5 55
6511.711.76.4
100
-40 to +100-40 to +85
8170
592
-
162.41.9
20White
Y ellow7017X33
60
-40 to +100-30 to +85
7070
570
-
7.02.82.1
20C lear
Y ellow/G reen7017X7
60
-40 to +100-30 to +85
57.570
660
-
7.02.3
1.720
C lear
R ed7017X1
60
-40 to +100-30 to +85
7070
560
-
3.82.82.1
20C lear
G reen7017X5
Diffused Diffused Diffused Diffused
4 4 4 55 5 5 5
Surface Mount Technology
•Tape and reel packaged for high-speed autoinsertion.•Convection and vapor-phase reflow compatible.•Compact form enables high density placement.•Packaged 3000 per reel.
Leading Edge LED Optoelectronic Performance
•Consistent high brightness.
Exceptional Reliability
•Stringent process controls assure quality.•Extensive qualification testing to meet strictest
requirements.•Designed to permit easy post-reflow solder joint
inspection.
•Solder pad geometry on page 1-X1.
D E S C R I P T I O N A N D F E A T U R E S
7021X Series Surface Mount LEDs Reverse Mounting
1-32
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
-40 to +100-40 to +100-40 to +100-40 to +100
70
5552.71.65
2.8
2.1
-30 to +854
60
70C lear
G reen7021X15
70
5803.72.25
2.8
2.2
-30 to +854
60
70C lear
Y ellow7021X7
70
5606.9
4.15
2.8
2.1
-30 to +854
6070
C lear
G reen7021X5
70
6053.72.25
2.8
2.2
-30 to +854
60
70C lear
Orange7021X37021X1
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorP ower Diss ipation (mW)P eak F orward C urrent Max. (mA)R everse V oltage (IR =100µA) (V )Operating temperature (°C )S torage T emperature (°C )F orward V oltage T yp. (IF =20mA)F orward V oltage Max. (IF =20mA)
Luminous Intens ity Min. (IF =20mA)
P eak Wavelength (IF =20mA)V iewing Angle (degrees)
Diffused/Non-Diffused
Lead S older T ime @ 260°C (seconds)
Luminous Intens ity T yp. (IF =20mA)
R ed
C lear57.5
604
-30 to +85-40 to +100
1.7
2.35
7.612.7660
75
Diffused Diffused Diffused Diffused
R ated C urrent (mA) 20 20 20 2020
3.20
1.40
0.10 0.75
1.60
LE D C HIP
1.40
0.80
0.30
P LAS T IC
S UB S T R AT E
0.500.50
ANODE
C AT HODE
P OLAR IT Y MAR K
C AT HODE MAR K
All dimensionsin mm.
Surface Mount Technology
•Tape and reel packaged for high-speed autoinsertion.•Convection and vapor-phase reflow compatible.•Compact form enables high density placement.•Packaged 2000 pieces per reel.
Leading Edge LED Optoelectronic Performance
•Consistent high brightness.
Exceptional Reliability
•Stringent process controls assure quality.•Extensive qualification testing to meet strictest requirements.•Designed to permit easy post-reflow solder joint inspection.
•Solder pad geometry on page 1-X2.
D E S C R I P T I O N A N D F E A T U R E S
7022X Series SMT LEDs 1206 Package Size
1-36
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
All dimensionsin mm.
3.20
0.60
1.60
LE D C HIP
1.60
0.30
1.55
0.75
R 0.80
P LAS T IC
S UB S T R AT E
0.50 0.50
ANODE
C AT HODE
P OLAR IT Y MAR K
C AT HODE MAR K
-40 to +100-40 to +100-40 to +100-40 to +100-40 to +100
55513.06.05
2.8
2.1
-40 to +854
60
70C lear
G reen7022X15
63022.010.0
52.8
2.0
-40 to +854
60
70C lear
R ed7022X11
58030.010.0
52.8
2.2
-40 to +854
60
70C lear
Y ellow7022X7
56038.0
15.05
2.8
2.1
-40 to +854
6070
C lear
G reen7022X5
60525.010.0
52.8
2.2
-40 to +854
60
70C lear
Orange7022X37022X1
Non-Diffused
P AR T NUMB E ROutput C olor
P ackage C olorP ower Diss ipation (mW)P eak F orward C urrent Max. (mA)R everse V oltage (V )Operating temperature (°C )S torage T emperature (°C )F orward V oltage T yp. (IF =20mA)F orward V oltage Max. (IF =20mA)
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
70.051.06.06.0
150
-30 to +90-30 to +90
7020
590
-
42.02.82.1
20C lear
S uper Y ellowC MD11-21UY C /T R 8
150
-30 to +90-30 to +90
10020
660
-
30.02.41.7
20C lear
R edC MD11-21S R C /T R 8
150
-30 to +90-30 to +90
10020
640
-
3.02.8
2.020
C lear
R edC MD11-21V R C /T R 8
150
-30 to +90-30 to +90
7020
585
-
3.02.82.0
20C lear
Y ellowC MD11-21V Y C /T R 8C MD11-21V G C /T R 8
S ingle
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 10% duty cycle) (mA)
P ackage T ype
V iewing Angle 20 1/2 (degrees)
G reen
C lear20
2.12.83.07.5
-
57020
105-30 to +90-30 to +90
150
S ingle S ingle S ingle S ingle
R everse V oltage (IR =100µA) (V ) 5.0 5.0 5.0 5.05.0
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 5 55
Surface Mount Technology
•Tape and reel packaged for high-speed autoinsertion.•Convection and vapor-phase reflow compatible.•Compact form enables high density placement.•Packaged 2000 pieces per reel.
Leading Edge LED Optoelectronic Performance
•Consistent high brightness.•Integral lensing for narrow angle light dispersion.•Bi-color available.
Exceptional Reliability
•Stringent process controls assure quality.•Extensive qualification testing to meet strictest requirements.•Designed to permit easy post-reflow solder joint inspection.
•Solder pad geometry on page 1-X2.
All dimensionsin mm.
Ø .045
C AT HODEMAR K
2.00±0.20
0.90±0.10
0.60
3.00±0.20
1.50±0.20
1.80±0.201.10±0.20
1.30
1.60
D E S C R I P T I O N A N D F E A T U R E S
CMD15-21 & 22 Series SMT LEDs 1206 Package Size
1-34
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
A B S O L U T E M A X I M U M R A T I N G S
P art NumberC olorE mitted
Luminous Intens ity F orward V oltage
(nm)WavelengthP eak
(mA)C urrentT est
(mcd)Min.
(mcd)T yp.
(V )T yp.
(V )Max.
C MD15-21S R C /T R 8
C MD15-21V R C /T R 8
C MD15-21V Y C /T R 8
C MD15-21V G C /T R 8
C MD15-21UB C /T R 8
C MD15-21UG C /T R 8
C MD15-21V G D/T R 8
C MD15-21V R D/T R 8
C MD15-21V Y D/T R 8
C MD15-21UY C /T R 8
C MD15-21US OC /T R 8
C MD15-22V R V G C /T R 8
C MD15-22S R UG C /T R 8
S uper R ed
H.E . R ed
Y ellowG reen
B lue
G reenH.E . R ed
C lear
C learS uper Y ellow
S unset orange
H.E . R ed
G reen
G reen
R ed
6.0
3.6
3.6
6.0
19.0
7.02.4
5.5
3.7
27.0
17.0
3.6
6.0
9.0
7.0
15.0
6.0
6.0
10.0
45.0
12.0
4.06.5
4.0
47.0
31.0
20.010.0
15.0
12.0
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
1.72.0
2.0
2.1
4.9
2.1
2.0
2.1
2.0
2.1
2.1
2.8
2.1
1.7
2.1
2.42.8
2.8
2.8
5.5
2.8
2.8
2.8
2.8
2.8
2.8
2.8
2.82.4
2.8
660
640
585
570
430
565
640
570
585
590
620
640
570
660
565
LensC olor
C lear
C lear
C learC lear
C lear
C lear
C lear
C lear
C lear
C lear
C lear
C lear
R ed Diffused
Y ellow Diffused
G reen Diffused
CMD 15-21 CMD15-22
BI-COLOR
Green H.E.Red Yellow Red UnitsPower Dissipation...................................................105...............105..................105..................100.............mWStorage/Operating Temperature...........................-40 to +85....-40 to +85.........-40 to +85........-40 to +85..........°CPeak Forward Current (1µs @ 10% duty cycle)...........150...............150..................150.................150..............mAReverse Voltage (IR=100µA)....................................5.0................5.0...................5.0..................5.0................VLead Solder Time @ 260°C........................................5...................5......................5....................5........SecondsAverage Forward Current..........................................25.................30....................30...................30..............mA
Surface Mount Technology
•Tape and reel packaged forhigh-speed autoinsertion.
•Convection and vapor-phasereflow compatible.
•Compact form enables highdensity placement.
•Packaged 2000 pieces per reel.Leading Edge LED Optoelectronic
Performance
•Consistent high brightness.•Integral lensing for narrow angle
•Designed to permit easy post-reflowsolder joint inspection.
•Solder pad geometry on page 1-X2.All dimensionsin mm.
C AT HODEMAS K
2.70
3.20
2.00
1.40
1.10
0.60
1.10
2.10
0.90
0.50 R
2.50
1.50±0.20
MAR KC AT HODE
2.00±0.20
0.60
0.40 R
0.60
1.10±0.20
3.20±0.20
D E S C R I P T I O N A N D F E A T U R E S
CMD17-21 Series SMT LEDs 0805 Package Size
1-25
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
A B S O L U T E M A X I M U M R A T I N G S
Red Yellow Green UnitsPower Dissipation................................................100.................105................105........................ mWOperating/Storage Temperature......................-40 to +85........-40 to +85.......-40 to +85......................°CPeak Forward Current (1 µs @ 10% duty cycle).......150.................150................150..........................mAReverse Voltage (IR=100µA).................................5.0..................5.0.................5.0............................VLead Solder Time @ 260°C.....................................5.....................5...................5.....................secondsAverage Forward Current.......................................30...................30.................30...........................mA
P art NumberC olorE mitted
Luminous Intens ity F orward V oltage
(nm)WavelengthP eak
(mA)C urrentT est
(mcd)Min.
(mcd)T yp.
(V )T yp.
(V )Max.
C MD17-21S R C /T R 8
C MD17-21V R C /T R 8
C MD17-21V Y C /T R 8
C MD17-21V G C /T R 8
C MD17-21UG C /T R 8
C MD17-21V R D/T R 8
C MD17-21V G D/T R 8
C MD17-21V Y D/T R 8
C MD17-21UB C /T R 8
C MD17-21UY C /T R 8
S uper R ed
H.E . R ed
Y ellow
G reen
G reenH.E . R ed
Y ellow
G reen
B lueS uper Y ellow
10.0
4.5
5.0
6.0
8.0
3.02.5
4.0
16.0
41.0
21.0
13.0
12.0
10.0
15.0
6.0
4.07.0
27.0
61.0
20
20
20
20
20
20
20
20
20
20
1.72.0
2.0
2.1
2.1
2.0
2.0
2.1
4.5
2.1
2.4
2.8
2.8
2.8
2.8
2.8
2.8
2.8
5.5
2.8
660
640
585
570
570
640
585
570
430
590
C olorLens
C lear
C lear
C lear
C lear
C learR ed Diffused
Y ellow Diffused
G reen Diffused
C learC lear
C MD17-21US OC /T R 8 S unset Orange 26.0 43.0 202.1 2.8 620C lear
(degrees)AngleV iew
140
140
140
140
140
140
140
140
120
140
140
Surface Mount Technology
•Tape and reel packaged for high-speedautoinsertion.
•Convection and vapor-phase reflowcompatible.
•Compact form enables high densityplacement.
•Packaged 2000 pieces per reel.Leading Edge LED Optoelectronic
Performance
•Consistent high brightness.•Bi-color available.Exceptional Reliability
•Stringent process controls assure quality.•Extensive qualification testing to meet
strictest requirements.•Designed to permit easy post-reflow solder
joint inspection.•Solder pad geometry on page 1-X2.
1.25±0.20
1.40
1.10±0.10
0.40
2.00±0.20
1.25
0.20 R 0.60
MAS KC AT HODE
All dimensions in mm.
D E S C R I P T I O N A N D F E A T U R E S
CMD67-21 SERIES SMT LEDs
1-22
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
P art NumberC olorE mitted
Luminous Intens ity F orward V oltage
(nm)WavelengthP eak
IndicatesMarkP olarity
(mcd)Min.
(mcd)T yp.
(V )T yp.
(V )Max.
C MD67-21V G C /T R 8
C MD67-21V Y C /T R 8
C MD67-21V R C /T R 8
C MD67-21S R C /T R 8
C MD67-21UR C /T R 8
C MD67-21UB C /T R 8
C MD67-21US OC /T R 8
C MD67-21UY C /T R 8
G reen
Y ellow
H.E . R ed
B right R ed
B right R ed
B lueS uper Y ellow
S uper Orange
15.0
6.0
6.0
25.0
36.0
59.065.0
70.0
25.0
10.0
10.0
40.0
62.0
98.0
85.090.0
C athode
C athode
C athode
Anode
Anode
C athode
C athode
C athode
2.12.0
2.0
1.7
1.7
4.5
2.1
2.1
2.8
2.8
2.8
2.4
2.4
5.5
2.8
2.8
570
585
640
660
660
430
590
620
C olorLens
C lear
C lear
C lear
C lear
C lear
C lear
C lear
C lear
(degrees)AngleV iew
120
120
120
120
120
120
120
120
A B S O L U T E M A X I M U M R A T I N G S
Green H.E.Red Yellow Bright Red UnitsPower Dissipation...................................................105...............120...................105.................100.............mWStorage/Operating Temperature...........................-40 to +85....-40 to +85........-40 to +85.........-40 to +85..........°CPeak Forward Current (1µs @ 10% duty cycle)...........150...............150..................150.................150..............mAReverse Voltage (IR=100µA)....................................5.0................5.0...................5.0..................5.0................VLead Solder Time @ 260°C........................................5...................5......................5....................5........SecondsAverage Forward Current..........................................25.................30....................30...................30..............mA
P OS IT ION 2
P OS IT ION 12.40R E D C AT HODE
3.20±0.20
2.20±0.102.80±0.20
0.800.15
0.50±0.10
1.90±0.20
3.40±0.20
DIA.
1#
C AT HODEG R E E N
2#
3#
4#
1#
2#4#
3#Surface Mount Technology
•Tape and reel packaged forhigh-speed autoinsertion.
•Convection and vapor-phasereflow compatible.
•Compact form enables highdensity placement.
•Packaged 2000 pieces per reel.
Leading Edge LED Optoelectronic
Performance
•Consistent high brightness.•Integral lensing for narrow angle
•Designed to permit easy post-reflowsolder joint inspection.
•Solder pad geometry on page 1-X1.
Features
•Circuit substrate-glass laminated epoxy•Size 1206: 3.2 (L) x 1.6 (W) x 1.2 (H)mm•Soldering pads: gold plated, all soldering
methods applicable.•SUY, HY, SUD, HD, HR, HSD (AllnGaP) high
luminous intensity types.•Taped in 8mm blister tape, cathode marking
to transporting perforation.•All components are sorted into luminous
intensity classes.•Solder pad geometry on page 1-X2.
D E S C R I P T I O N A N D F E A T U R E S
OLS-150 Series Size 1206 Standard SMT LEDs
1-37
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
A B S O L U T E M A X I M U M R A T I N G S
Power Dissipation.....................................................................................................................65 mWOperating Temperature.....................................................................................................-40 to +85°CStorage Temperature........................................................................................................-55 to +85°CPeak Forward Current (1 µs @ 10% duty cycle)...........................................................................100 mAReverse Voltage (IR=100µA).........................................................................................................5.0VLead Solder Time @ 260°C...................................................................................................10 secondsForward Current.........................................................................................................................20mA
P art NumberC olorE mitted
Luminous Intens ity F orward V oltage
(nm)WavelengthP eak
(mA)C urrentT est
(mcd)Min.
(mcd)T yp.
(V )T yp.
(V )Max.
OLS -150R
OLS -150S D
OLS -150S R
OLS -150UR
OLS -150G
OLS -150P G
OLS -150D
OLS -150Y
OLS -150S B
OLS -150S Y G
OLS -150S UY
OLS -150S UD
OLS -150HY G
OLS -150HY
OLS -150HS D
OLS -150HR
OLS -150HD
R ed
R ed
R ed
R ed
G reen
P ure G reen
Y ellow
Orange
S uper B lue
G reen
S uper Y ellow
S uper Orange
Hyper G reen
High T S N R ed
High Y ellow
High R ed
High Orange
1
4
4
7
4
24
4
4
10
25
40
25
40
40
25
40
2.5
12
12
25
12
4
1212
8
25
50
8040
85
8545
85
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
2.252.1
1.9
1.9
2.2
2.2
2.1
2.1
3.8
2.25
2.0
2.0
2.1
2.0
2.1
2.0
2.0
2.62.6
2.6
2.6
2.6
2.6
2.6
2.6
5.2
2.6
2.6
2.6
2.62.6
2.6
2.6
2.6
700
635
660
660
567
556
590
610
430
570
590
610
570
590
630
644620
2.00
MAR K INGC AT HODE
R 0.35
3.20
1.20
0.401.60
All dimensions in mm.
Features
•Circuit substrate-glass laminated epoxy•Size 1206: 3.2 (L) x 1.6 (W) x 1.2 (H)mm•Soldering pads: gold plated, all soldering
methods applicable.•HY, HD (AllnGaP) high luminous intensity types.•Taped in 8mm blister tape, cathode marking
to transporting perforation.•All components are sorted into luminous
intensity classes.•Solder pad geometry on page 1-X2.
D E S C R I P T I O N A N D F E A T U R E S
OLS-156 Series Size 1206 Low Current SMT LEDs
1-38
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
A B S O L U T E M A X I M U M R A T I N G S
Power Dissipation.......................................................................................................................8 mWOperating Temperature.....................................................................................................-40 to +85°CStorage Temperature........................................................................................................-55 to +85°CPeak Forward Current (1 µs @ 10% duty cycle)...........................................................................100 mAReverse Voltage (IR=100µA).........................................................................................................5.0VLead Solder Time @ 235°C...................................................................................................10 secondsForward Current..........................................................................................................................4 mA
P art NumberC olorE mitted
Luminous Intens ity F orward V oltage
(nm)WavelengthP eak
(mA)C urrentT est
(mcd)Min.
(mcd)T yp.
(V )T yp.
(V )Max.
OLS -156R
OLS -156S D
OLS -156S R
OLS -156UR
OLS -156G
OLS -156Y
OLS -156S B
OLS -156D
OLS -156HY
OLS -156HD
OLS -156HR
R ed
R ed
R ed
R ed
G reen
Y ellow
Orange
B lue
High Y ellow
High Orange
High R ed
0.2
0.4
0.6
1.0
0.4
0.30.3
0.4
1.6
1.6
2.5
0.4
0.6
0.9
1.8
1.2
0.6
0.50.8
3.0
3.0
2.8
2
2
2
2
2
2
2
2
2
2
2
1.851.8
1.65
1.65
1.9
1.8
1.8
3.2
1.8
1.8
1.8
2.22.2
2.1
2.1
2.2
2.2
2.2
4.0
2.2
2.2
2.2
700
635
660
660
570
590
610
430
590
620
644
2.00
MAR K INGC AT HODE
R 0.35
3.20
1.20
0.401.60
All dimensions in mm.
Features
•Circuit substrate-glass laminated epoxy•Size 0805: 2.0 (L) x 1.25 (W) x 1.1 (H)mm•Soldering pads: gold plated, all soldering
methods applicable.•SUY, HY, SUD, HD, HR, HSD (AllnGaP) high
luminous intensity types•Taped in 8mm blister tape, cathode marking
to transporting perforation.•All components are sorted into luminous
intensity classes.•Solder pad geometry on page 1-X2.
D E S C R I P T I O N A N D F E A T U R E S
OLS-170 Series Size 0805 Standard SMT LEDs
1-28
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
A B S O L U T E M A X I M U M R A T I N G S
Green Yellow Red UnitsPower Dissipation....................................................50.......................105....................100...........................mWStorage Temperature.........................................-55 to +85............-48 to +100........-48 to +100.......................°COperating Temperature......................................-40 to +85.............-40 to +85..........-40 to +85........................°CPeak Forward Current (1µs @ 10% duty cycle)...........100.......................150...................150............................mAReverse Voltage (IR=100µA)....................................5.0........................5.0....................5.0..............................VLead Solder Time @ 260°C.......................................10..........................5.......................5......................SecondsForward Current......................................................20.........................30.....................30............................mA
All dimensions in mm.
B AC K S IDEC AT HODE MAR K ING
1.10
0.40
2.00 1.40
0.401.25
P art NumberC olorE mitted
Luminous Intens ity F orward V oltage
(nm)WavelengthP eak
(mA)C urrentR ated
(mcd)Min.
(mcd)T yp.
(V )T yp.
(V )Max.
OLS -170R
OLS -170S D
OLS -170S R
OLS -170UR
OLS -170G
OLS -170P G
OLS -170D
OLS -170Y
OLS -170S B
OLS -170S Y G
OLS -170S UY
OLS -170S UD
OLS -170HY G
OLS -170HY
OLS -170HS D
OLS -170HR
OLS -170HD
R ed
R ed
R ed
R ed
G reen
P ure G reen
Y ellow
Orange
S uper B lue
G reen
S uper Y ellow
S uper Orange
Hyper G reen
High T S N R ed
High Y ellow
High R ed
High Orange
1
4
4
7
4
24
4
4
10
25
40
25
40
40
25
40
2.5
12
12
25
12
4
1212
8
25
50
8040
85
8545
85
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
2.252.1
1.9
1.9
2.2
2.2
2.1
2.1
3.8
2.25
2.0
2.0
2.1
2.0
2.1
2.0
2.0
2.62.6
2.6
2.6
2.6
2.6
2.6
2.6
5.2
2.6
2.6
2.6
2.62.6
2.6
2.6
2.6
700
635
660
660
567
556
590
610
430
570
590
610
570
590
630
644620
Features
•Circuit substrate-glass laminated epoxy•Size 0805: 2.0 (L) x 1.25 (W) x 1.1 (H)mm•Soldering pads: gold plated, all soldering
methods applicable.•HY, HD (AllnGaP) high luminous intensity types•Taped in 8mm blister tape, cathode marking
to transporting perforation.•All components are sorted into luminous
intensity classes.•Solder pad geometry on page 1-X2.
D E S C R I P T I O N A N D F E A T U R E S
OLS-176 Series Size 0805 Low Current SMT LEDs
1-30
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
A B S O L U T E M A X I M U M R A T I N G S
All dimensions in mm.
Power Dissipation.......................................................................................................................8 mWOperating Temperature.....................................................................................................-40 to +85°CStorage Temperature........................................................................................................-55 to +85°CPeak Forward Current (1µs @ 10% duty cycle)..............................................................................10 mAReverse Voltage (IR=100µA)..........................................................................................................5.0VForward Current...........................................................................................................................4mA
B AC K S IDEC AT HODE MAR K ING
1.10
0.40
2.00 1.40
0.401.25
P art NumberC olorE mitted
Luminous Intens ity F orward V oltage
(nm)WavelengthP eak
(mA)C urrentR ated
(mcd)Min.
(mcd)T yp.
(V )T yp.
(V )Max.
OLS -176R
OLS -176S D
OLS -176S R
OLS -176UR
OLS -176G
OLS -176P G
OLS -176D
OLS -176Y
OLS -176S B
OLS -176S Y G
OLS -176S UY
R ed
R ed
R ed
R ed
G reen
P ure G reen
Y ellow
Orange
S uper B lue
G reen
S uper Y ellow
1
4
4
7
4
24
4
4
10
25
2.5
12
12
25
12
4
1212
8
25
50
2
2
2
2
2
2
2
2
2
2
2
2.252.1
1.9
1.9
2.2
2.2
2.1
2.1
3.8
2.25
2.0
2.62.6
2.6
2.6
2.6
2.6
2.6
2.6
5.2
2.6
2.6
700
635
660
660
567
556
590
610
430
570
590
Features
•Circuit substrate-glass laminated epoxy•Size 0805: 2.0 (L) x 1.25 (W) x .80 (H)mm•Soldering pads: gold plated, all soldering
methods applicable.•SUY, HY, SUD, HD, HR, HSD (AllnGaP) high
luminous intensity types.•Taped in 8mm blister tape, cathode marking
to transporting perforation.•All components are sorted into luminous
intensity classes.•Solder pad geometry on page 1-X2.
D E S C R I P T I O N A N D F E A T U R E S
OLS-180 Series Size 0805 Low Profile SMT LEDs
1-31
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
A B S O L U T E M A X I M U M R A T I N G S
Power Dissipation.....................................................................................................................50 mWOperating Temperature.....................................................................................................-40 to +85°CStorage Temperature........................................................................................................-55 to +85°CPeak Forward Current Max........................................................................................................100 mAReverse Voltage (IR=100µA).........................................................................................................5.0VLead Solder Time @ 260°C...................................................................................................10 secondsForward Current.........................................................................................................................20mA
P art NumberC olorE mitted
Luminous Intens ity F orward V oltage
(nm)WavelengthP eak
(mA)C urrentR ated
(mcd)Min.
(mcd)T yp.
(V )T yp.
(V )Max.
OLS -180R
OLS -180S D
OLS -180S R
OLS -180UR
OLS -180G
OLS -180P G
OLS -180D
OLS -180Y
OLS -180S B
OLS -180S Y G
OLS -180S UY
OLS -180S UD
OLS -180HY G
OLS -180HY
OLS -180HS D
OLS -180HR
OLS -180HD
R ed
R ed
R ed
R ed
G reen
P ure G reen
Y ellow
Orange
S uper B lue
G reen
S uper Y ellow
S uper Orange
Hyper G reen
High T S N R ed
High Y ellow
High R ed
High Orange
1
4
4
7
4
24
4
4
10
25
40
25
40
40
25
40
2.5
12
12
25
12
4
1212
8
25
50
8040
85
8545
85
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
2.252.1
1.9
1.9
2.2
2.2
2.1
2.1
3.8
2.25
2.0
2.0
2.1
2.0
2.1
2.0
2.0
2.62.6
2.6
2.6
2.6
2.6
2.6
2.6
5.2
2.6
2.6
2.6
2.62.6
2.6
2.6
2.6
700
635
660
660
567
556
590
610
430
570
590
610
570
590
630
644620
0.80
B AC K S IDEC AT HODE MAR K ING
0.402.00 1.40
0.401.25
All dimensions in mm.
Features
•Circuit substrate-glass laminated epoxy•Size 1206: 3.2 (L) x 1.6 (W) x 1.2 (H)mm•Soldering pads: gold plated, all soldering
methods applicable.•SUY, HY, SUD, HD, HR, HSD (AllnGaP) high
luminous intensity types.•Taped in 8mm blister tape, cathode marking
to transporting perforation.•Thinner total height can be obtained by means of
fitting lens portion into the cutout provided on the P.C.B.•Reverse taping available on request.•All components are sorted into luminous
intensity classes.•Solder pad geometry on page 1-X2.
D E S C R I P T I O N A N D F E A T U R E S
OLS-230 Series Size 1206 Standard SMT LEDs Reverse Mount
1-39
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
A B S O L U T E M A X I M U M R A T I N G S
Power Dissipation.....................................................................................................................65 mWOperating Temperature.....................................................................................................-40 to +85°CStorage Temperature........................................................................................................-55 to +85°CPeak Forward Current (1 µs @ 10% duty cycle)...........................................................................100 mAReverse Voltage (IR=100µA).........................................................................................................5.0VLead Solder Time @ 235°C...................................................................................................10 secondsForward Current.........................................................................................................................20mA
P art NumberC olorE mitted
Luminous Intens ity F orward V oltage
(nm)WavelengthP eak
(mA)C urrentT est
(mcd)Min.
(mcd)T yp.
(V )T yp.
(V )Max.
OLS -230R
OLS -230S D
OLS -230S R
OLS -230UR
OLS -230G
OLS -230P G
OLS -230D
OLS -230Y
OLS -230S B
OLS -230S Y G
OLS -230S UY
OLS -230S UD
OLS -230HY G
OLS -230HY
OLS -230HS D
OLS -230HR
OLS -230HD
R ed
R ed
R ed
R ed
G reen
P ure G reen
Y ellow
Orange
S uper B lue
G reen
S uper Y ellow
S uper Orange
Hyper G reen
High T S N R ed
High Y ellow
High R ed
High Orange
1
4
4
7
4
24
4
4
10
25
40
25
40
40
25
40
2.5
12
12
25
12
4
1212
8
25
50
8040
85
8545
85
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
2.252.1
1.9
1.9
2.2
2.2
2.1
2.1
3.8
2.25
2.0
2.0
2.1
2.0
2.1
2.0
2.0
2.62.6
2.6
2.6
2.6
2.6
2.6
2.6
5.2
2.6
2.6
2.6
2.62.6
2.6
2.6
2.6
700
635
660
660
567
556
590
610
430
570
590
610
570
590
630
644620
1.40
1.20
MAR K INGC AT HODE
R 0.35
3.20
0.401.60
All dimensions in mm.
D E S C R I P T I O N A N D F E A T U R E S
7011X Series Bicolor SMT LEDs
1-42
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
Color Combinations:
•Red/Yellow•Red/Green•Green/Yellow
Surface Mount Technology
•Tape and reel packaged for high-speedautoinsertion.
•Convection and vapor-phase reflow compatible.•Compact form enables high density placement.•Packaged 2500 pieces per reel.
Leading Edge LED Optoelectronic Performance
•Consistent high brightness.
Exceptional Reliability
•Stringent process controls assure quality.•Extensive qualification testing to meet
strictest requirements.•Designed to permit easy post-reflow solder
joint inspection.
•Solder pad geometry on page 1-X1.
-30 to +90-30 to +90-30 to +90
100
560/5807.5/6.0
3.0302.5
2.1/2.2
-30 to +854
70
75C lear
G reen/Y ellow7011X5/7
100
660/57017.0/12.0
6.030
2.0/2.5
1.7/2.1
-30 to +854
7060/75C lear
R ed/Y ellow7011X1/7
100
660/56017.0/7.56.0/3.0
302.0/2.5
1.7/2.1
-30 to +854
70
60/75C lear
R ed/G reen7011X1/57011X1/17
Non-Diffused
P AR T NUMB E ROutput C olor
P ackage C olorP ower Diss ipation (mW)P eak F orward C urrent Max. (mA)R everse V oltage (IR =100µA) (V )Operating temperature (°C )S torage T emperature (°C )F orward V oltage T yp. (IF =20mA)F orward V oltage Max. (IF =20mA)
Luminous Intens ity Min. (IF =20mA)
P eak Wavelength (IF =20mA)V iewing Angle (degrees)
Diffused/Non-Diffused
C ontinuous F orward C urrent Max. (mA)
Luminous Intens ity Max. (IF =20mA)
R ed/Y ellow
C lear60/75
704
-30 to +85-30 to +90
1.75/2.2
2.0/2.530
6.0/3.017.0/6.0660/580
100
Non-Diffused Non-Diffused Non-Diffused
R ated C urrent (mA) 20 20 2020100 100 100100R everse C urrent Max. (V =4V )R
LE NS
LE D C HIP #1C AT HODE MAR K
12
43
12
34
3.00
2.00
1.80
0.90
0.60 1.00
0.60 MIN.
0.80
1.502.50
C ONT AC T S , G OLD P LAT E D (4)
C HIP #2LE D
All dimensionsin mm.
.032(.80)
.039(1.00)
.059(1.50)
.020(.50)
.051(1.30)
.098 (2.49)
.087 (2.21)
.091(2.30)
.118(3.00)
GREEN
RED/AMBERSEE NOTE 2
3 4
211 2
43
TERMINAL
CATHODE MARK
RED/AMBERSEE NOTE 2
GREEN
Color Combinations:
•Red/Green•Green/Yellow
Surface Mount Technology
•Tape and reel packaged for high-speedautoinsertion.
•Convection and vapor-phase reflow compatible.•Compact form enables high density placement.•Packaged 4000 pieces per reel.
Leading Edge LED Optoelectronic Performance
•Consistent high brightness.
Exceptional Reliability
•Stringent process controls assure quality.•Extensive qualification testing to meet
strictest requirements.•Designed to permit easy post-reflow solder
joint inspection.
•Solder pad geometry on page 1-X1.
D E S C R I P T I O N A N D F E A T U R E S
7018X Series Bicolor SMT LEDs
1-43
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
16
60
-30 to +85-40 to +100
70110
580
-
92818
20C lear
G reen/Y ellow7018X5/77018X1/5
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
Operating T emperature (°C )P eak F orward C urrent Max. (1µs @ 10% duty cycle) (mA)
Diffus ion
V iewing Angle (degrees)
R ed/G reen
C lear20
2.12.84.56.4
-
560120
70-40 to +100-30 to +85
60
Diffused
R everse V oltage (IR =100µA) (V ) 44
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)S torage T emperature (°C )
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
25.040.025.0
150
-40 to +85-40 to +85
105120565
-
15.02.82.1
20C lear
G reen
150
-40 to +85-40 to +85
100120660
-
25.02.4
1.720
C lear
S uper R edC MD67-22S R UG C /T R 8
150
-40 to +85-40 to +85
105120570
-
15.02.82.1
20C lear
G reenC MD67-22V R G C /T R 8P AR T NUMB E R
Output C olorP ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 10% duty cycle) (mA)
V iewing Angle 20 1/2 (degrees)
H.E . R ed
C lear20
2.02.86.0
10.0
-
640120105
-40 to +85-40 to +85
150R everse V oltage (IR =100µA) (V ) 5.0 5.0 5.05.0
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 55
G R E E N
R E D
ALL DIME NS IONS AR E IN mm.
2.40R E D C AT HODE
3.20±0.20
2.20±0.102.80±0.20
0.800.15
0.50±0.10
1.90±0.20
3.40±0.20
DIA.
0.80
0.60
T Y P .
1#
C AT HODEG R E E N
2#
3#
4#
1#
2#4#
3#
Surface Mount Technology
•Tape and reel packaged forhigh-speed autoinsertion.
•Convection and vapor-phasereflow compatible.
•Compact form enables highdensity placement.
•Packaged 2000 pieces per reel.
Leading Edge LED Optoelectronic
Performance
•Consistent high brightness.•Integral lensing for narrow angle
•Taped in 8mm blister tape,cathode marking totransporting perforation.
•All components are sortedinto luminous intensity classes.
•Solder pad geometry onpage 1-X2.
D E S C R I P T I O N A N D F E A T U R E S
OLS-130 Series Size 1206 Duplex SMT LEDs
1-44
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
A B S O L U T E M A X I M U M R A T I N G S
Power Dissipation.....................................................................................................................65 mWOperating Temperature.....................................................................................................-40 to +85°CStorage Temperature........................................................................................................-55 to +85°CPeak Forward Current (1 µs @ 10% duty cycle)...........................................................................100 mAReverse Voltage (IR=100µA).........................................................................................................5.0VLead Solder Time @ 235°C...................................................................................................10 secondsForward Current........................................................................................................................20 mA
•Circuit substrate-glass laminated epoxy•Size 0805: 2.0 (L) x 1.25 (W) x 1.1 (H)mm•Soldering pads: gold plated, all soldering
methods applicable.•Also suitable for side-mounting.•Taped in 8mm blister tape, cathode marking
to transporting perforation.•All components are sorted into luminous
intensity classes.•Solder pad geometry on page 1-X2.
D E S C R I P T I O N A N D F E A T U R E S
OLS-172 Series Size 0805 Standard Bipolar SMT LEDs
1-29
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
122525
150
-40 to +85-48 to +85
105-
590
-
42.62.1
20C lear
Y Y ellow
100
-40 to +85-55 to +85
50-
570
-
102.6
2.2520
C lear
S Y G G reenOLS -172X/X
150
-40 to +85-48 to +100
100-
660
-
72.61.9
20C lear
UR R ed
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
Operating T emperature (°C )P eak F orward C urrent Max. (1µs @ 10% duty cycle) (mA)
Diffus ion
V iewing Angle 20 1/2 (degrees)
S R R ed
C lear20
1.92.64
12
-
660-
100-48 to +100-40 to +85
150
Diffused Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5 10 55
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)S torage T emperature (°C )
Lead S older T ime @ 260°C 5 5 55
B AC K S IDEC AT HODE MAR K ING
1.10
0.402.00 1.40
0.401.25
All dimensions in mm.
D E S C R I P T I O N A N D F E A T U R E S
CMD28-21 Series SMT LEDs
1-50
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
0.1617.03.06.0
150
-40 to +85-40 to +85
105150640
-
0.12.82.0
1C lear
H.E . R edC MD28-21V R C /T R 8/T 1
150
-40 to +85-40 to +85
100150660
-
11.02.41.7
20C lear
R edC MD28-21S R C /T R 8
150
-40 to +85-40 to +85
100150640
-
1.52.8
2.020
C lear
R edC MD28-21V R C /T R 8
150
-40 to +85-40 to +85
105150585
-
3.52.82.0
20C lear
Y ellowC MD28-21V Y C /T R 8C MD28-21V G C /T R 8
S ingle
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 10% duty cycle) (mA)
P ackage T ype
V iewing Angle 20 1/2 (degrees)
G reen
C lear20
2.12.81.05.5
-
570150105
-40 to +85-40 to +85
150
S ingle S ingle S ingle S ingle
R everse V oltage (IR =100µA) (V ) 5.0 5.0 5.0 5.05.0
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 5 55
1.60.160.4
150
-40 to +85-40 to +85
100150660
-
1.02.41.7
1C lear
R edC MD28-21S R C /T R 8/T 1
150
-40 to +85-40 to +85
105150570
-
0.12.8
2.11
C lear
G reenC MD28-21V G C /T R 8/T 1
150
-40 to +85-40 to +85
105150585
-
0.252.82.1
1C lear
Y ellowC MD28-21V Y C /T R 8/T 1
S ingle S ingle S ingle
5.0 5.0 5.05 5 5
Surface Mount Technology
•Tape and reel packaged for high-speedautoinsertion.
•Convection and vapor-phase reflow compatible.•Compact form enables high density placement.•Gull Wing lead form•Packaged 2000 pieces per reel.
Leading Edge LED Optoelectronic Performance
•Consistent high brightness.•Low current types available.
Exceptional Reliability
•Stringent process controls assure quality.•Extensive qualification testing to meet
strictest requirements.•Designed to permit easy post-reflow solder
joint inspection.
0.40
0.50
0.26
0.13±0.07MAX.
0.80
1.40±0.20
2.50±0.20
4.20MAX.
2.00±0.20
C AT HODE
All dimensionsin mm.
D E S C R I P T I O N A N D F E A T U R E S
CMD91-21/TR7, TR9, TR10 Series SMT LEDs
1-51
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
A B S O L U T E M A X I M U M R A T I N G S
660
640
585
565
2.4
2.8
2.82.8
1.7
2.0
2.02.1
25
25
25
25
170.0
80.0
30.0
50.0
113.0
48.0
18.0
30.0
R ed
H.E . R ed
Y ellow
G reen
(V )Max.
(V )T yp.
(mcd)T yp.
(mcd)Min.
(degrees)Angle
V iewing
(nm)Wavelength
P eakF orward V oltageLuminous Intens ityE mittedC olor
P art Number
C MD91-21V G C /T R 7/T R 9/T R 10
C MD91-21V Y C /T R 7/T R 9/T R 10
C MD91-21V R C /T R 7/T R 9/T R 10
C MD91-21S R C /T R 7/T R 9/T R 10
C olorLens
C lear
C lear
C lear
C lear S ingle
S ingle
S ingle
S ingle
P ackageT ype
Green H.E.Red Yellow Red UnitsPower Dissipation...................................................105...............105...................105.................100.............mWStorage/Operating Temperature...........................-40 to +85....-40 to +85........-40 to +85.........-40 to +85..........°CPeak Forward Current (1µs @ 10% duty cycle)...........150...............150..................150.................150..............mAReverse Voltage (IR=100µA)....................................4.0................4.0...................4.0..................4.0................VLead Solder Time @ 260°C........................................5...................5......................5....................5........SecondsAverage Forward Current..........................................25.................30....................30...................30..............mA
Surface Mount Technology
•Tape and reel packaged for high-speedautoinsertion.
•Convection and vapor-phase reflow compatible.•Compact form enables high density placement.
Leading Edge LED Optoelectronic Performance
•Consistent high brightness.
•Gull wing, Yoke or Z-bend lead configuration.
Exceptional Reliability
•Stringent process controls assure quality.•Extensive qualification testing to meet
strictest requirements.•Designed to permit easy post-reflow solder
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
A B S O L U T E M A X I M U M R A T I N G S
Green Yellow Red UnitsPower Dissipation...................................................105.......................105....................100..........................mWStorage Temperature.........................................-25 to +90.............-25 to +90..........-25 to +90........................°COperating Temperature......................................-25 to +80.............-25 to +80..........-25 to +80........................°CPeak Forward Current (1µs @ 10% duty cycle)...........150.......................150...................150............................mAReverse Voltage (IR=100µA)....................................5.0........................5.0....................5.0..............................VLead Solder Time @ 260°C.......................................10..........................5.......................5......................SecondsForward Current......................................................25.........................30.....................30............................mA
Surface Mount Technology
•Tape and reel packaged for high-speedautoinsertion.
•Convection and vapor-phase reflow compatible.•Compact form enables high density placement.•93-21 2000 pieces per reel•93-22 1000 pieces per reel
Leading Edge LED Optoelectronic Performance
•Consistent high brightness.•Bi-color available.•Gull wing lead form.
Exceptional Reliability
•Stringent process controls assure quality.•Extensive qualification testing to meet
strictest requirements.•Designed to permit easy post-reflow solder
joint inspection.
0.40
0.12±0.07
0.261.50±0.10
0.40
3.00±0.10
4.60±0.10
ANODE
0.29
1.80
0.12±0.07
0.50
4.50±0.10
2.70±0.10
3.40±0.10
1.50±0.10
CMD93-22CMD93-21
VG,VY,VR SR
SR
VG,UG VG
VR
All dimensions in mm.
P art NumberC olorE mitted
Luminous Intens ity F orward V oltage
(nm)WavelengthP eak
(mA)C urrentR ated
(mcd)Min.
(mcd)T yp.
(V )T yp.
(V )Max.
C MD93-21V G C /T R 8
C MD93-21V Y C /T R 8
C MD93-21V R C /T R 8
C MD93-21S R C /T R 8
C MD93-22V G C /T R 8
C MD93-22S R V G C /T R 8
C MD93-22S R UG C /T R 8
G reenY ellow
R ed
R ed
R ed
G reen
R ed
G reen
R ed
G reen
15.0
7.0
7.0
25.0
7.0
12.024.0
12.0
24.0
13.5
25.0
12.0
12.0
40.0
12.0
20.0
40.020.0
40.0
20.0
20
20
20
20
20
20
20
20
20
20
2.12.0
2.0
1.7
2.0
2.1
1.7
2.1
1.7
2.1
2.82.8
2.8
2.4
2.8
2.8
2.4
2.8
2.4
2.8
570
585
640
660
640
570
660
570
660
565
LensC olor
C lear
C lear
C lear
C lear
C lear
C lear
C lear
C lear
C lear
C lear
P ackageT ype
S ingleS ingle
S ingle
S ingle
Dual
Dual
Dual
Dual
Dual
Dual
(degrees)AngleV iew
130
130
130
130
125
125
125
125
125
125
D E S C R I P T I O N A N D F E A T U R E S
CMD95-21/TR7, TR9, TR10 Series SMT LEDs
1-53
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
A B S O L U T E M A X I M U M R A T I N G S
660
640
585
570
2.4
2.8
2.82.8
1.7
2.0
2.02.1
25
25
25
25
100.0
25.0
25.0
19.5
60.0
16.0
16.0
11.5
R ed
R ed
Y ellow
G reen
(V )Max.
(V )T yp.
(mcd)T yp.
(mcd)Min.
(degrees)Angle
V iewing
(nm)Wavelength
P eakF orward V oltageLuminous Intens ityE mittedC olor
P art Number
C MD95-21V G C /T R 7
C MD95-21V Y C /T R 7
C MD95-21V R C /T R 7
C MD95-21S R C /T R 7
C olorLens
C lear
C lear
C lear
C lear S ingle
S ingle
S ingle
S ingle
P ackageT ype
Green Yellow Red UnitsPower Dissipation...................................................105..................105...................100...............................mWStorage...........................................................-40 to +100......-40 to +100......-40 to +100.............................°COperating Temperature.......................................-40 to +85.......-40 to +85........-40 to +85..............................°CPeak Forward Current (1µs @ 10% duty cycle)...........150..................150..................150.................................mAReverse Voltage (IR=100µA)....................................5.0...................5.0...................5.0....................................VLead Solder Time @ 260°C........................................5......................5......................5...........................SecondsForward Current......................................................25....................30....................30..................................mA
660
640
585
570
2.4
2.8
2.82.8
1.7
2.0
2.02.1
25
25
25
25
100.0
25.0
25.0
19.5
60.0
16.0
16.0
11.5
R ed
R ed
Y ellow
G reenC MD95-21V G C /T R 9
C MD95-21V Y C /T R 9
C MD95-21V R C /T R 9
C MD95-21S R C /T R 9
C lear
C lear
C lear
C lear S ingle
S ingle
S ingle
S ingle
660
640
585
570
2.4
2.8
2.82.8
1.7
2.0
2.02.1
25
25
25
25
100.0
25.0
25.0
19.5
60.0
16.0
16.0
11.5
R ed
R ed
Y ellow
G reenC MD95-21V G C /T R 10
C MD95-21V Y C /T R 10
C MD95-21V R C /T R 10
C MD95-21S R C /T R 10
C lear
C lear
C lear
C lear S ingle
S ingle
S ingle
S ingle
Surface Mount Technology
•Tape and reel packaged for high-speedautoinsertion.
•Convection and vapor-phase reflow compatible.•Compact form enables high density placement.•1000 pieces per reel.•Gull wing, Yoke or Z-bend lead configurations.
Exceptional Reliability
•Stringent process controls assure quality.•Extensive qualification testing to meet
strictest requirements.•Designed to permit easy post-reflow solder
joint inspection.Leading Edge LED Optoelectronic Performance
4318F Series Solid State LED Lamps-Super Brite T-1 (3mm)
1-60
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
C AT HODE
S Q. NOM.
0.45
NOM.
2.54
2.92±0.25
NOM.
1.27MIN.
24.13
5.97±0.40
NOM.
1.02
4.45±0.25
3.18±0.25
8580
60
-55 to +100-55 to +100
-45
583
-
233.0
2.220
C lear
Y ellow4318F 7
90
-55 to +100-20 to +100
-45
565
-
273.02.3
20C lear
G reen4318F 54318F 1
Non-Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 10% duty cycle) (mA)
Diffus ion
V iewing Angle 20 1/2 (degrees)
R ed
C lear20
1.82.23565
-
6504587
-20 to +100-55 to +100
300
Non-Diffused Non-Diffused
R everse V oltage (IR =100µA) (V ) 5 55
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 55
All dimensionsin mm.
T-1 Super Brite LEDs
•High intensity light output.
•Ideal for high ambient light conditions.
D E S C R I P T I O N A N D F E A T U R E S
T-1 Low Profile LED Lamps
1-55
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
2.92 DIA.3.30
1.14 3.81
25.4 MIN.
.432 S Q.
.280
C AT HODEF LAT DE NOT E S
3.81 DIA.4.06
1.271.521.27 R E F .
All dimensionsin mm.
7.07.07.0
100
-55 to +100-55 to +100
105180635
-
1.03.02.0
20R ed
H.E . R edC MD5777C
90
-55 to +100-55 to +100
105180565
-
1.03.0
2.220
G reen
H.E . G reenC MD5477C
60
-55 to +100-55 to +100
105180585
-
1.03.02.1
20Y ellow
Y ellowC MD5377CC MD5077C
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 0.3% duty cycle) (mA)
Diffus ion
V iewing Angle (degrees)
R ed
R ed20
1.62.00.3
1.75
-
660110105
-55 to +100-55 to +100
100
Diffused Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5.0 5.0 5.05.0
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 55
T hese LE D lamps feature a low profile T -1 package.T hey offer a very wide viewing angle, a compact s ize andapproximately 4.7mm mounting centers .
D E S C R I P T I O N A N D F E A T U R E S
T-1 Standard Profile LED Lamps
1-56
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
These solid state indicators offer a variety of color selections.The High Efficiency Red, Green and Yellow devices are made with a GaAsP/GaPchip. Their small size provides a very good viewing angle, and their smallsquare leads add to their versatility as good all purpose indicators.These lamps can be mounted on approximately 4.7mm centers.
9.09.09.01.5
100
-55 to +100-55 to +100
10590
635
-
1.53.02.0
20R ed
H.E . R edC MD5774C
90
-55 to +100-55 to +100
10590
565
-
1.23.02.2
20G reen
H.E . G reenC MD5474C
60
-55 to +100-55to +100
10590
585
-
1.53.0
2.120
Y ellow
Y ellowC MD5374C
100
-55 to +100-55 to +100
10590
660
-
0.62.01.6
20R ed
R edC MD5075CC MD5074C
Non-Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 0.3% duty cycle) (mA)
Diffus ion
V iewing Angle (degrees)
R ed
R ed20
1.62.00.72.5
-
66070
105-55 to +100-55 to +100
100
Diffused Diffused Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5 5 5 55
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 5 55
MIN.
25.4
CATHODE
1.27±0.63
0.50±0.25
5.08±0.25
Ø3.94±.013
SQ. TYP.
0.35±0.08
1.40±0.13
Ø3.12±0.20
All dimensionsin mm.
D E S C R I P T I O N A N D F E A T U R E S
T-1 Super Brite LED Lamps
1-61
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
400.0200.0160.063.0
150
-40 to +85-40 to +85
10025
660
-
250.02.41.7
20C lear
R edC MD264-3UR C
150
-40 to +85-40 to +85
10530
565
-
100.02.82.1
20C lear
G reenC MD264-3UG C
150
-40 to +85-40 to +85
10040
660
-
100.02.4
1.720
R ed
R edC MD264-3UR D
150
-40 to +85-40 to +85
10040
660
-
40.02.41.7
20R ed
R edC MD264-3S R D/L2C MD264-3UG D
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 10% duty cycle) (mA)
Diffus ion
V iewing Angle 20 1/2 (degrees)
G reen
G reen20
2.12.8
25.040.0
-
56545
105-40 to +85-40 to +85
150
Diffused Diffused Non-Diffused Non-Diffused
R everse V oltage (IR =100µA) (V ) 5 5 5 55
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 5 55
All dimensions in mm.
These T-1 LED lamps provide superior brightness compared toconventional LED lamps through the use of GaAIAs and improvedGaP technologies. Intensities as high as 400 millicandela can beachieved with these lamps making them excellent choices forindicators in high ambient lighting conditions as well as forbacklighting.
Ø2.80
TYP.
0.50 SQ.
4.601.00
1.50
CATHODE
MIN.
27.0
2.54
Ø3.20
D E S C R I P T I O N A N D F E A T U R E S
T-100 (T-1) Diffused Lens LED Lamps
1-58
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
585
585
585
660
3.0
3.0
3.02.0
2.1
2.1
2.11.6
70
70
70
60
4.5
3.0
2.0
1.5
2.5
1.5
1.0
0.5
Y ellow
Y ellow
Y ellow
R ed
(V )Max.
(V )T yp.
(mcd)T yp.
(mcd)Min.
(degrees)Angle
V iewing
(nm)Wavelength
P eakF orward V oltageLuminous Intens ityE mittedC olor
P art Number
C MD50640
C MD53640
C MD53641
C MD53642
C olorLens
R ed
Y ellow
Y ellow
Y ellow Diffused
Diffused
Diffused
Diffused
P ackageT ype
635
635
565
565
3.0
3.0
3.03.0
2.0
2.0
2.22.2
60
60
75
75
2.5
2.0
10.0
5.0
2.0
1.0
6.0
2.0
H.E .R ed
H.E .R ed
H.E .G reen
H.E .G reenC MD54643
C MD54644
C MD57640
C MD57641
G reen
G reen
R ed
R ed Diffused
Diffused
Diffused
Diffused
6353.02.0 604.03.0H.E .R edC MD57642 R ed Diffused
A B S O L U T E M A X I M U M R A T I N G S
Power Dissipation................................................................................120.......................120............ mWOperating/Storage Temperature........................................................-55 to +100..........-55 to +100.........°CPeak Forward Current (1µs @ 0.3% duty cycle)......................................100....................... 90..............mAReverse Voltage (IR=100µA).................................................................5.0........................5.0................VForward Current...................................................................................30.........................30..............mALead Solder Time at 260°C.....................................................................5...........................5........seconds
Std. Red All Others Units
C AT HODE
2.54±0.25
S Q. T Y P .0.46±0.08
2.92±0.25
R E F .1.02
R E F .1.27
MIN.25.4
5.72±0.64
4.45±0.25
3.18±0.25
All dimensions in mm.
These solid state indicators offer a variety of colors, wide
view angles and small square leads, all contributing to their
versatility as good all purpose indicator lamps. The High
Efficiency Red and Yellow devices utilize GaAsP/GaP
technology while the High Efficiency Green devices use an
improved GaP technology. These lamps are good replacements
for the Hewlett Packard HLMP-1300/1500 series.
D E S C R I P T I O N A N D F E A T U R E S
T-100 (T-1) Non-Diffused Lens LED Lamps
1-57
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
585
585
585
585
3.0
3.0
3.03.0
2.1
2.1
2.12.2
35
35
35
35
8.0
4.0
12.0
60.0
6.0
3.0
6.0
24.0
Y ellow
Y ellow
Y ellow
Y ellow
(V )Max.
(V )T yp.
(mcd)T yp.
(mcd)Min.
(degrees)Angle
V iewing
(nm)Wavelength
P eakF orward V oltageLuminous Intens ityE mittedC olor
P art Number
HLMP 1440
C MD5360
C MD53621
C MD53622
C olorLens
P ale T int
P ale T int
Y ellow
Y ellow Non-Diffused
Non-Diffused
Non-Diffused
Non-Diffused
P ackageT ype
635
565
565
565
3.0
3.0
3.03.0
2.2
2.1
2.12.2
35
35
35
35
60.0
12.0
12.0
60.0
24.0
6.0
6.0
24.0
H.E .R ed
H.E .G reen
H.E .G reen
H.E .G reenHLMP 1540
C MD5460
C MD54624
HLMP 1340
P ale T int
P ale T int
G reen
P ale T int Non-Diffused
Non-Diffused
Non-Diffused
Non-Diffused
635
635
635
635
3.0
3.0
3.03.0
2.0
2.0
2.02.0
35
35
35
35
12.0
4.0
2.0
12.0
6.0
3.0
1.5
6.0
H.E .R ed
H.E .R ed
H.E .R ed
H.E .R edC MD5760
C MD57620
C MD57621
C MD57622
P ale T int
R ed
R ed
R ed Non-Diffused
Non-Diffused
Non-Diffused
Non-Diffused
A B S O L U T E M A X I M U M R A T I N G S
Power Dissipation........................................................................................................................120 mWOperating/Storage Temperature............................................................................................-55 to +100°CPeak Forward Current (1µs @ 0.3% duty cycle)..................................................................................90mAReverse Voltage (IR=100µA)..............................................................................................................5.0VForward Current.............................................................................................................................30mALead Solder Time at 260°C.........................................................................................................5 seconds
This series of lamps offers both standard and ultra-bright
devices. The HLMP1X40 devices are pin for pin replacements
for Hewlett Packard lamps. All lamps are tinted to some
degree to aid in their identification. These lamps feature high
efficiency GaP based chips, 2.54mm lead spacing,
T-1 diameter and wide view angles. These lamps are excellent
replacements for the HLMP-1X20/1 series.
C AT HODE
2.54±0.25
S Q. T Y P .0.46±0.08
2.92±0.25
R E F .1.02
R E F .1.27
MIN.25.4
5.72±0.64
4.45±0.25
3.18±0.25
All dimensions in mm.
D E S C R I P T I O N A N D F E A T U R E S
4300FLC Series T-1 Solid State LED Lamps
1-63
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
1.81.6
7
-55 to +100-55 to +100
36
583
-
1.02.5
1.92
Y ellow
Y ellow4300F 7LC
7
-55 to +100-20 to +100
24
565
-
1.02.21.8
2G reen
G reen4300F 5LC4300F 1LC
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 10% duty cycle) (mA)
Diffus ion
V iewing Angle (degrees)
R ed
R ed2
1.82.01.01.8
-
635
24-55 to +100-55 to +100
7
Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5 55
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 55
50 50 50
C AT HODE
S Q. NOM.
.018
NOM.
.100
.115±.010
NOM.
.050
MIN.
.950
.235±.015
NOM.
.040
.175±.010
.125±.010
All dimensions in inches .
Features:
T-1 Brite LEDs• Requires only 2 mA.•Ideal for limited-current power supplies.
D E S C R I P T I O N A N D F E A T U R E S
T-100 (T-1) Low Current LED Lamps
1-62
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
.177±.012
.039±.008
MIN.
1.039
.039 MIN.
.039±.020
T Y P .
.020 S Q.
Ø.118±.008
Ø.124±.008
.100
ANODE
All dimensionsin inches.
This T-1 HLMP1700 Series is a pin for pin replacement for
Hewlett Packard lamps. All devices feature medium to wide
view angles. The design of the LED chips is optimized for
low current applications and is far superior in luminous
intensity compared to standard LED lamps at very low
operating currents. These LED lamps are primarily intended
for direct viewing. These lamps feature 4 mW power and 2 mA
drive for low power TTL and CMOS circuits.
2.02.0
25
-55 to +100-55 to +100
2750
565
-
1.02.7
1.92
G reen
H.E . G reenHLMP 1790
20
-55 to +100-55 to +100
2450
585
-
1.02.71.9
2Y ellow
Y ellowHLMP 1719HLMP 1700
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 10% duty cycle) (mA)
Diffus ion
V iewing Angle (degrees)
H.E . R ed
R ed2
1.82.21.02.0
-
6355027
-55 to +100-55 to +100
25
Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5 55
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
All dimensions
in inches.
8.08.08.08.0
560
583
20
2.015
12
13Amber
Amber4302F 3-12V
560
635
20
2.015
12
13R ed
R ed4302F 1-12V
560
565
15
2.07.5
510
G reen
G reen4302F 5-5V
560
583
15
2.07.5
5
10Amber
Amber4302F 3-5V4302F 1-5V
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorR ated C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
Diffus ion
V iewing Angle 20 1/2 (degrees)
R ed
R ed10
57.5
2.08.0
20
635605
Diffused Diffused Diffused Diffused
C ontinuous F orward C urrent Max. (mA)
R everse B reakdown V oltage Min. (V )
8.0
560
565
20
2.015
12
13G reen
G reen4302F 5-12V
Diffused
ANODE
S Q.T Y P .
.019±.002
.100±.010
.115±.010
.235±.015
.050±.010
MIN.
1.060
.033±.012
.175±.010
.125±.010•High brightness output•Integral current limiting resistor•TTL compatible requires no
external current limiter with 5 voltor 12 volt supply.
•Wide viewing angle - 60°.
D E S C R I P T I O N A N D F E A T U R E S
T-1 Resistored LED Lamps
1-64
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
ANODE
.100
Ø.126
Ø.110
T Y P .
.020 S Q.
.060
MIN.
1.060
.040
.181
All dimensions
in inches.
These T-1 LED lamps contain an integral resistor in series with theemitter chip to allow their direct application into 5 and 12 volt circuits.No external current limiting resistor is required. These lamps allow forsavings in both component and assembly cost. These LEDs arecompatible with all conventional soldering techniques.
635
585
565
635
20.0
15.0
15.015.0
10.0
10.0
10.010.0
40
40
40
40
13.0
9.0
12.0
13.0
9.0
6.0
8.0
9.0
H.E . R ed
Y ellow
G reen
H.E . R ed
(V )Max.
(V )T yp.
(mcd)T yp.
(mcd)Min.
(degrees)Angle
V iewing
(nm)Wavelength
P eakF orward V oltageLuminous Intens ityE mittedC olor
P art Number
C MD264-3ID/HV 5
C MD264-3G D/HV 5
C MD264-3Y D/HV 5
C MD264-3ID/HV 12
C olorLens
R ed
G reen
Y ellow
R ed Diffused
Diffused
Diffused
Diffused
P ackageT ype
585
565
20.020.0
10.010.0
40
40
9.0
12.06.0
8.0
Y ellow
G reenC MD264-3G D/HV 12
C MD264-3Y D/HV 12
G reen
Y ellow Diffused
Diffused
12.0
5.0
5.0
5.0
V f
12.0
12.0
12.0
5.0
5.05.0
V f
12.012.0
A B S O L U T E M A X I M U M R A T I N G S
5.0V 12.0V UnitsOperating/Storage Temperature...........................-40 to +85..................-40 to +85.............................°CReverse Voltage (IR=100µA)....................................5.0..............................5.0...................................VLead Solder Time @ 260°C........................................5.................................5.......................... secondsD.C. Forward Voltage...............................................7.5.............................15.0..................................V
D E S C R I P T I O N A N D F E A T U R E S
4301F1/5, F11/17, F15/17 Series Solid State LED Lamps Bi-Color Super Brite T-1 (3mm)
1-68
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
2020403.7
5.025
10560
565
20
8.02.52.2
20White
G reen4301F 15/17
5.030
10560
590
10
5.02.12.1
20White
Y ellow
5.030
10560
625
10
8.02.0
2.020
White
R ed4301F 11/17
5.040
100100
565
20
1.12.82.1
20White
G reen4301F 1/5
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
R everse B reakdown V oltage Min. (V )
Diffus ion
V iewing Angle (degrees)
R ed
White20
1.82.43.712.6
20
660100
100305.0
Diffused Diffused Diffused Diffused
R ated C urrent (mA)
P ower Diss ipation (mW)C ontinuous F orward C urrent Max. (mA)
40
5.030
10560
590
20
5.02.52.1
20White
Y ellow
Diffused
T Y P .
.020 S Q.
G R E E N ANODE
.100
Ø.126
Ø.114
.060±.010
.040
.175
1.00
MAX.
.039
C AT HODE
G R E E N
C AT HODE
R E D
All dimensions in inches.
• Dual chip• Uniformity of output color• Wide viewing angle• White diffused
D E S C R I P T I O N A N D F E A T U R E S
4361L1/5 Series Red/Green Bi-Color
1-69
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
.020
Ø.122±.004
Ø.150±.004
.079
.079
ANODE (R E D)
C AT HODE (C OMMON)ANODE (G R E E N)
R E D C HIP
G R E E N C HIP
.106
.189±.008
.189±.012
.232±.012
MIN.1.063
ME NIS C US.040 MAX.
T Y P ..020 S Q.
T Y P ..028 MAX.
.040 MIN.
All dimensions in inches.• Dual chip• Uniformity of output color• Wide viewing angle• White diffused
4361L1/5
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorV iewing Angle (degrees)Luminous Intens ity Min. (mcd)Luminous Intens ity Max. (mcd)
R ated C urrent (mA)
Diffus ion
R ed/G reen
White60/70
4/68/1220
2.0/2.1F orward V oltage T yp. (V f)
D E S C R I P T I O N A N D F E A T U R E S
4361M1/5 Series Red/Green Bi-Color
1-70
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
• Dual chip• Uniformity of output color• Wide viewing angle• White diffused
4361M1/5
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorV iewing Angle (degrees)Luminous Intens ity Min. (mcd)Luminous Intens ity Max. (mcd)
R ated C urrent (mA)
Diffus ion
R ed/G reen
White60/70
24
202.0/2.1F orward V oltage T yp. (V f)
All dimensions in inches .
.135/.133
.150±.004
G R E E N C HIP
R E D C HIP
ANODE (G R E E N)
C AT HODE (C OMMON)
ANODE (R E D)
.079
.079
MAX..028 T Y P .
T Y P .S Q.020±.004
Ø.122±.004
.020
.040 MIN
1.063 MIN..189±.012
ME NIS C US.040 MAX..236±.008
.059±.008
.287±.012
D E S C R I P T I O N A N D F E A T U R E S
T-1 Super Brite Bi-Color LED Lamps
1-67
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
Y
G
E
Y
G
E
Ø.126
.040
ANODE
.177
.040
MIN.1.00
T Y P ..020 S Q.
.100
Ø.114
All dimensions in inches.
These T-1 Bi-Color LED lamps provide exceptional lightoutput in a variety of color combinations. These lampscan provide three-state status indication when theiroff-state White is included. They are available in a varietyof color combinations, in wide view angle diffused packages.
14141615
150
-40 to +85-40 to +85
10560
585
-
6.02.82.0
20White
Y ellowC MD264-3Y G W
150
-40 to +85-40 to +85
10560
585
-
6.02.82.0
20White
Y ellow
150
-40 to +85-40 to +85
10560
635
-
7.02.8
2.020
White
H.E .R edC MD264-3E Y W
150
-40 to +85-40 to +85
10560
565
-
6.52.82.1
20White
G reenC MD264-3E G W
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent (T <10 mS )
Diffus ion
V iewing Angle 20 1/2 (degrees)
H.E .R ed
White20
2.02.87.016
-
63560
105-40 to +85-40 to +85
150
Diffused Diffused Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5 5 5 55
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 5 55
15
150
-40 to +85-40 to +85
10560
565
-
6.52.82.1
20White
G reen
Diffused
55
D E S C R I P T I O N A N D F E A T U R E S
T-100 (T-1) Bi-Color/Bi-Polar LED Lamps
1-66
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
ANODE LE AD
R E D AIG aAs
.136/.112
.100
.126/.109
.189/.165.244/.205
MAX.1.039
.030 MIN.
.020
G R E E NANODE
All dimensions
in inches.
The CMD6461 is a white diffused wide view angle dual chip,four-state lamp utilizing deep red AIGaAs and HighEfficiency Green GaP. When AC driven, the lamp appearsorange. The CMD6661 is a red diffused wide view anglebi-polar lamp featuring red AIGaAs and GaAsP/GaPtechnology. These lamps provide excellent uniformity andvisual appeal. Additionally, theselamps incorporate radicallyimproved die off-center characteristics and improved durabilityto soldering heat.
101010
90
-55 to +100-55 to +100
135
630
-
2.53.02.1
20R ed
H.E .R ed
90
-55 to +100-55 to +100
135
650
-
2.53.0
2.120
R ed
R edC MD6661
90
-55 to +100-55 to +100
135100567
-
2.53.02.1
20White
H.E .G reenC MD6461
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 0.3% duty cycle) (mA)
Diffus ion
V iewing Angle (degrees)
R ed
White20
2.13.02.510
-
650100135
-55 to +100-55 to +100
90
Diffused Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5 5 55
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 55
100 100
D E S C R I P T I O N A N D F E A T U R E S
T-1 and T-1 3/4 Blue LED Lamps
1-71
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
ANODE
.100
Ø.128
Ø.114
T Y P .
.020 S Q.
.040
MIN.
1.00
.040
.177
All dimensionsin inches.
ANODE
.100
Ø.232
Ø.197
T Y P .
.020 S Q.
.0400
MIN.
1.00
.040
.339
T-1 T-1 3/4
These revolutionary new LED
lamps emit a true blue color
(430 nm) for those design
engineers looking for that fourth
status color. Lamps are
manufactured with state of the
art Silicon Carbide (SIC)
technology.
LED lamps are available in both
T-1 and T-1 3/4 package sizes,
in both diffused and non-diffused
lens types.
800350250
100
-20 to +80-20 to +80
9812
430
-
6005.54.9
20C lear
B lueC MD383UB C
100
-20 to +80-20 to +80
9824
430
-
2505.5
4.920
C lear
B lueC MD383UB C /H2
100
-20 to +80-20 to +80
9830
430
-
1605.54.9
20C lear
B lueC MD264UB CC MD264UB D
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 10% duty cycle) (mA)
Diffus ion
V iewing Angle 20 1/2 (degrees )
B lue
B lue20
4.95.563
100
-
4304598
-20 to +80-20 to +80
100
Non-Diffused Non-Diffused Non-Diffused
R everse V oltage (IR =100µA) (V ) 5 5 55
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 55
T -1 3/4T -1
D E S C R I P T I O N A N D F E A T U R E S
CMD333UWC Series T-1 3/4 White LEDs
1-72
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
.339±.010
.039±.008
.197±.010
S Q.T Y P ..020
.100
.232±.010
MIN.1.00
MAX..059
MIN..039ANODE
All dimensions
in inches.
C MD333UWC
Non-Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 10% duty cycle) (mA)
Diffus ion
V iewing Angle (degrees)
White
C lear20
3.753.851.72.3
2.6
47520
--20 to +70
-30 to +100
-R everse V oltage (IR =100µA) (V ) 5.0
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5
D E S C R I P T I O N A N D F E A T U R E S
4300E Series T-1 3/4 Brite Flangeless LED Lamp
1-77
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
4300E 1NF
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
P eak F orward C urrent @ 1ms-300 P P S (A)
Diffus ion
V iewing Angle 20 1/2 (degrees)
R ed
R ed20
1.72.2.53
-
66070
1051001.05R everse B reakdown V oltage Min. (V )
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)C ontinuous F oeward C urrent Max. (mA)
4308H Series Solid State LED Lamps-Ultra Brite 240 mcd (red) T-1 3/4 (5mm)
1-87
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
140140
20
8524
583
18
953.0
2.220
C lear
Y ellow4308H7
2513524
565
18
1103.02.3
20C lear
G reen4308H54308H1
Non-Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
Diffus ion
V iewing Angle 20 1/2 (degrees)
R ed
C lear20
1.82.290
240
30
645248720
Non-Diffused Non-Diffused
C apacitance @ V =0
P ower Diss ipation (mW)C ontinuous F orward C urrent Max. (mA)
•High intensity light output.•Clear non-diffused lens.•Ideal for high ambient light conditions..230±.010
.347±.015
.030±.005
.190±.010
NOM.
.100
MIN.
1.023
NOM.
.050
S Q.NOM.
.025
C AT HODE
All dimensions
in inches.
D E S C R I P T I O N A N D F E A T U R E S
T-1 3/4 Clear Lens LED Lamps
1-83
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
These non-diffused LED lamps offer high brightness in multiple colorsand are designed for backlighting.The High Efficiency Red and Yellow lamps are produced with GaAsP/GaPand the High Efficiency Green lamp is produced with GaP/GaP.This compact, rugged and lightweight LED lamp requires low powerand allows for versatile PC board or panel mounting.All devices are available with either cathode long or anode longconfigurations.
100.0100.025.090.0
1000
-55 to +100-55 to +100
12028
635
45
17.03.02.0
20Amber
H.E . R edC MD6152
1000
-55 to +100-55 to +100
12028
635
45
17.03.02.0
20R ed
H.E . R edC MD5752*
90
-55 to +100-55 to +100
12035
562
20
12.03.0
2.220
G reen
H.E .G reenC MD5452*
1000
-55 to +100-55 to +100
12028
585
45
10.03.02.1
20Y ellow
Y ellowC MD5352*C MD5152*
Non-Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 0.3% duty cycle) (mA)
Diffus ion
V iewing Angle 20 1/2 (degrees)
H.E . R ed
Amber20
2.03.0
17.0100.0
45
63528
120-55 to +100-55 to +100
1000
Diffused Diffused Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5 5 5 55
C apacitance pF V r=0, F =1MHz
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 5 55
100.0100.025.090.0
1000
-55 to +100-55 to +100
12028
635
45
17.03.02.0
20R ed
H.E . R ed
C MD6752
90
-55 to +100-55 to +100
12035
562
20
30.03.02.2
20G reen
H.E .G reen
C MD64521
90
-55 to +100-55 to +100
12035
562
20
12.03.02.2
20G reen
H.E .G reen
C MD64520
1000
-55 to +100-55 to +100
12028
585
45
10.03.02.1
20Y ellow
Y ellow
C MD6352
Diffused Diffused Diffused Diffused
5 5 5 55 5 5 5
MIN.
1.00
.340±.010
.100
C AT HODE
S Q.T Y P .
.020±.003
.040
.190±.010
Ø.230
.050
All dimensions in inches.
* cathode long
D E S C R I P T I O N A N D F E A T U R E S
T-1 3/4 Diffused LED Lamps
1-80
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
These LED lamps offer a variety of diffused lens effects and coloravailability. These lamps are available with both wide view angles andnarrow view angles for high bright direct viewing. The High EfficiencyRed and Yellow lamps are produced with GaAsP/GaP and the HighEfficiency Green lamp is produced with GaP/GaP. This compact,rugged and lightweight LED lamp requires low power and allows forversatile PC board or panel mounting.
20.025.015.025.0
90
-55 to +100-55 to +100
12075
562
-
3.03.02.2
20G reen
H.E .G reenC MD64530
1000
-55 to +100-55 to +100
12024
585
-
10.03.02.1
20Y ellow
Y ellowC MD6354A
1000
-55 to +100-55 to +100
12065
585
-
2.53.0
2.120
Y ellow
Y ellowC MD6353
1000
-55 to +100-55 to +100
12024
635
-
10.03.02.0
20Amber
H.E . R edC MD6154AC MD6153
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 0.3% duty cycle) (mA)
Diffus ion
V iewing Angle 20 1/2 (degrees )
H.E . R ed
Amber20
2.03.03.0
15.0
-
63565
120-55 to +100-55 to +100
1000
Diffused Diffused Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5 5 5 55
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 5 55
25.010.030.020.0
1000
-55 to +100-55 to +100
12024
635
-
15.03.02.0
20R ed
H.E . R edC MD6754A
1000
-55 to +100-55 to +100
12065
635
-
3.03.02.0
20R ed
H.E . R edC MD6753
90
-55 to +100-55 to +100
12024
562
-
10.03.0
2.220
G reen
H.E .G reenC MD6454A
90
-55 to +100-55 to +100
12075
562
-
7.03.02.2
20G reen
H.E .G reenC MD6431
Diffused Diffused Diffused Diffused
5 5 5 55 5 5 5
MIN.
1.00
.340±.010
.100
C AT HODE
S Q.T Y P .
.020±.003
.040
.190±.010
Ø.230
.050
All dimensions in inches.
D E S C R I P T I O N A N D F E A T U R E S
T-1 3/4 Diffused LED Lamps
1-82
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
These LED lamps offer a variety of diffused lens effects and coloravailability. These lamps are available with both wide view angles andnarrow view angles for high bright direct viewing. The High EfficiencyRed and Yellow lamps are produced with GaAsP/GaP and the HighEfficiency Green lamp is produced with GaP/GaP. This compact,rugged and lightweight LED lamp requires low power and allows forversatile PC board or panel mounting.
20.025.015.025.0
90
-55 to +100-55 to +100
12075
562
20
3.03.02.2
20G reen
H.E .G reenC MD5453
1000
-55 to +100-55 to +100
12024
585
45
10.03.02.1
20Y ellow
Y ellowC MD5354A
1000
-55 to +100-55 to +100
12065
585
45
2.53.0
2.120
Y ellow
Y ellowC MD5353
1000
-55 to +100-55 to +100
12024
635
45
10.03.02.0
20Amber
H.E . R edC MD5154AC MD5153
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 0.3% duty cycle) (mA)
Diffus ion
V iewing Angle 20 1/2 (degrees )
H.E . R ed
Amber20
2.03.03.0
15.045
63565
120-55 to +100-55 to +100
1000
Diffused Diffused Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5 5 5 55
C apacitance pF V r=0, F =1MHz
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 5 55
25.010.030.0
1000
-55 to +100-55 to +100
12024
635
45
15.03.02.0
20R ed
H.E . R edC MD5754A
1000
-55 to +100-55 to +100
12065
635
45
3.03.0
2.020
R ed
H.E . R edC MD5753
90
-55 to +100-55 to +100
12024
562
20
10.03.02.2
20G reen
H.E .G reenC MD5454A
Diffused Diffused Diffused
5 5 55 5 5
MIN.
1.00
.340±.010
.100
C AT HODE
S Q.T Y P .
.020±.003
.040
.190±.010
Ø.230
.050
All dimensions in inches.
D E S C R I P T I O N A N D F E A T U R E S
T-1 3/4 General Purpose LED Lamps
1-79
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
The HLMP33XX series are direct replacements for Hewlett Packard'sHLMP33XX series. The FLV110 is a direct replacement for Fairchild'sFLV110. These LED lamps are available with wide or narrow viewingangles for direct viewing or backlighting. The standard red lamp isproduced with GaAsP and the High Efficiency Red lamps are producedwith GaAsP/GaP. Lamps are available either diffused or non-diffused.
3.035.018.07.0
90
-55 to +100-55 to +100
13570
665
30
0.82.01.6
20R ed
R edF LV 110
90
-55 to +100-55 to +100
13535
635
45
20.03.02.2
10R ed
H.E . R edHLMP 3316
90
-55 to +100-55 to +100
13535
635
45
12.03.0
2.210
R ed
H.E . R edHLMP 3315
90
-55 to +100-55 to +100
13565
635
45
4.03.02.2
10R ed
H.E . R edHLMP 3301HLMP 3300
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 0.3% duty cycle) (mA)
Diffus ion
V iewing Angle 20 1/2 (degrees)
H.E . R ed
R ed10
2.23.02.03.5
45
63565
135-55 to +100-55 to +100
90
Diffused Non-Diffused Non-Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5 5 5 55
C apacitance pF V r=0, F =1MHz
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 5 55
MIN.
1.00
.340±.010
.100
C AT HODE
S Q.T Y P .
.020±.003
.040
.190±.010
Ø.230
.050
All dimensions in inches.
D E S C R I P T I O N A N D F E A T U R E S
T-1 3/4 High Contrast LED Lamps
1-86
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
These white diffused with pale tint LED lamps provide maximumon/off contrast in high ambient lighting levels. These lamps aredesigned with wide view angles for direct viewing. The HighEfficiency Red/Orange and Yellow lamps are produced with GaAsP/GaP,the High Efficiency Green lamps are produced with GaP/GaP and thered (dark red) lamps are produced with AIGaAs.
12.012.012.0
1000
-55 to +100-55 to +100
12070
650
-
3.03.02.4
20White
R edC MD6951
90
-55 to +100-55 to +100
12070
565
-
3.03.0
2.320
White
H.E .G reenC MD6451
90
-55 to +100-55 to +100
12070
585
-
3.03.02.2
20White
Y ellowC MD6351C MD6151
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 10% duty cycle) (mA)
Diffus ion
V iewing Angle 20 1/2 (degrees)
H.E . R ed
White20
2.13.03.0
12.0
-
63570
120-55 to +100-55 to +100
90
Diffused Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5 5 55
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 55
MIN.
1.00
.340±.010
.100
C AT HODE
S Q.T Y P .
.020±.003
.040
.190±.010
Ø.230
.050
All dimensions in inches.
D E S C R I P T I O N A N D F E A T U R E S
T-1 3/4 Low Profile LED Lamps
1-74
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
158.0101.5
90
-55 to +100-55 to +100
10545
565
-
2.53.02.2
10G reen
H.E .G reenC MD54152
100
-55 to +100-55 to +100
10550
585
-
1.53.02.1
10Y ellow
Y ellowC MD53154
100
-55 to +100-55 to +100
10545
585
-
3.03.0
2.110
Y ellow
Y ellowC MD53152
100
-55 to +100-55 to +100
18050
660
-
0.42.01.6
10R ed
R edC MD50154C MD50152
Non-Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 0.3% duty cycle) (mA)
Diffus ion
V iewing Angle 20 1/2 (degrees)
R ed
R ed10
1.62.00.62.0
-
66045
180-55 to +100-55 to +100
100
Diffused Non-Diffused Diffused Non-Diffused
R everse V oltage (IR =100µA) (V ) 5 5 5 55
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 5 55
8.01012
100
-55 to +100-55 to +100
10550
630
-
2.03.02.0
10Orange
H.E .R edC MD57154
100
-55 to +100-55 to +100
10545
630
-
4.03.0
2.010
Orange
H.E .R edC MD57152
90
-55 to +100-55 to +100
10550
565
-
2.03.02.2
10G reen
H.E .G reenC MD54154
Diffused Non-Diffused Diffused
5 5 55 5 5
All dimensions
in inches.
These low profile T-1 3/4 lamps are availablein a variety of color and lens effects providing aversatile package for many applications.
.185±.015
NOM..100
.020±.002
.200±.010
.060±.005
MIN.1.00
.230±.010
ANODE
NOM..050
C AT HODE
D E S C R I P T I O N A N D F E A T U R E S
T-1 3/4 Low Profile LED Lamps
1-75
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
.180 DIA.
.200
.040 .350.330
1.00 MIN.
.023 S Q.T Y P .
.017
C AT HODEF LAT DE NOT E S
.230 DIA.
.050.050 R E F .
All dimensionsin inches.
This T-1 3/4 HLMP4700 Series is a pin for pin replacement forHewlett Packard lamps. All devices feature medium wide viewangles. The design of the LED chips is optimized for low currentapplications and is far superior in luminous intensity comparedto standard LED lamps at very low operating currents.These LED lamps are primarily intended for direct viewing.These lamps feature 4mW power and 2mA drive for lowpower TTL and CMOS circuits.
3.02.0
25
-55 to +100-55 to +100
2735
565
-
1.22.7
1.92
G reen
H.E .G reenHLMP 4740*
25
-55 to +100-55 to +100
2435
585
-
1.22.71.9
2Y ellow
Y ellowHLMP 4719HLMP 4700
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 0.3% duty cycle) (mA)
Diffus ion
V iewing Angle 20 1/2 (degrees)
H.E .R ed
R ed2
1.82.21.22.0
-
6353527
-55 to +100-55 to +100
25
Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5 55
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 55
* was CMD2454
D E S C R I P T I O N A N D F E A T U R E S
T-1 3/4 Standard Red LED Lamps
1-78
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
The CMD505X series of industry standard LED lamps is producedwith GaAsP. This standard red light source LED is available withvarious lens effects for backlighting and direct viewingapplications. This compact, rugged and lightweight LED requireslow power and allows for versatile mounting on a PC board or panel.
1000
-55 to +100-55 to +100
18024
6603.0
2.2
10R ed
R edC MD5054A-3
1000
-55 to +100-55 to +100
18024
6602.0
2.2
10R ed
R edC MD5054A-2
1000
-55 to +100-55 to +100
18024
6601.0
2.210
R ed
R edC MD5054A-1
1000
-55 to +100-55 to +100
18080
6600.5
2.2
20R ed
R edC MD5053C MD5052
Non-Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )
Luminous Intens ity Min. (mcd)P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 0.3% duty cycle) (mA)
Diffus ion
V iewing Angle 20 1/2 (degrees)
R ed
R ed20
2.2
0.766072
180-55 to +100-55 to +100
1000
Diffused Diffused Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5 5 5 55
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 5 55
1000
-55 to +100-55 to +100
18080
6600.5
2.220
R ed
R edC MD6053*
1000
-55 to +100-55 to +100
1801506600.1
2.2
20R ed
R edC MD5055
Diffused Diffused
5 55 5
* Anode long
MIN.
1.00
.340±.010
.100
C AT HODE
S Q.T Y P .
.020±.003
.040
.190±.010
Ø.230
.050
All dimensions in inches.
D E S C R I P T I O N A N D F E A T U R E S
T-1 3/4 Super Brite LED Lamps
1-84
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
A B S O L U T E M A X I M U M R A T I N G S
Power Dissipation................................................................................110.......................100............ mWOperating/Storage Temperature........................................................-40 to +85.............-40 to +85.........°CPeak Forward Current (1µs @ 0.3% duty cycle).......................................150.......................150.............mAReverse Voltage (IR=100µA).................................................................5.0........................5.0................VForward Current...................................................................................30.........................30..............mALead Solder Time at 260°C.....................................................................5...........................5........seconds
Red Green Units
These T-1 3/4 LED lamps, available in both diffused and non-diffusedpackages, provide exceptional luminous intensity when compared toconventional LED lamps. Luminous intensities as high as 2000millicandela are available making these lamps excellent indicators inhigh ambient lighting conditions. These lamps utilize improved GaPand GaAIAs technologies.
660
660
660
565
2.4
2.4
2.42.8
1.7
1.7
1.72.1
40
40
40
40
300.0
180.0
100.0
160.0
160.0
100.0
63.0
100.0
R ed
R ed
R ed
G reen
(V )Max.
(V )T yp.
(mcd)T yp.
(mcd)Min.
(degrees)Angle
V iewing
(nm)Wavelength
P eakF orward V oltageLuminous Intens ityE mittedC olor
P art Number
C MD333UG D
C MD333S R D/L2
C MD333HR D-1
C MD333HR D-3
C olorLens
G reen
R ed
R ed
R ed Diffused
Diffused
Diffused
Diffused
P ackageT ype
660
660
565
660
2.4
2.4
2.82.4
1.7
1.7
2.11.7
24
24
24
40
1200.0
600.0
800.0
400.0
630.0
250.0
250.0
250.0
R ed
R ed
G reen
R edC MD333UR D/S 207
C MD333UG C
C MD333HR C -6
C MD333UR C -1
R ed
C lear
C lear
C lear Non-Diffused
Non-Diffused
Non-Diffused
Diffused
6602.41.7 242000.01000.0R edC MD333UR C -2 C lear Non-Diffused
MIN.
1.00
.339
.100
C AT HODE
S Q.T Y P .
.020±.003
.040
Ø.197
Ø.232
.040
All dimensions in inches.
D E S C R I P T I O N A N D F E A T U R E S
T-1 3/4 Ultrabright LED Lamps
1-88
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
.180 DIA.
.200
.040 .350.330
1.00 MIN.
.023 S Q.T Y P .
.017
C AT HODEF LAT DE NOT E S
.230 DIA.
.050.050 R E F .
All dimensionsin inches.
The Ultrabright CMD3X50 Series LED lamp provides exceptionalbrightness in a very narrow viewing area, in a clear tinted non-diffusedpackage making them excellent for small area backlighting.A pale tint aids in identification. The High Efficiency Red and Yellow lampsare produced with GaAsP/GaP and the High Efficiency Green lamp isproduced with GaP/GaP. All feature an 80 mcd minimumluminous intensity.
150.0150.0
90
-55 to +100-55 to +100
13524
565
-
80.03.0
2.220
C lear
H.E .G reenC MD3450
90
-55 to +100-55 to +100
13524
635
-
80.03.02.2
20C lear
H.E .R edC MD3750C MD3350
T int N.D.
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 0.3% duty cycle) (mA)
P ackage T ype
V iewing Angle 20 1/2 (degrees)
Y ellow
C lear20
2.23.0
80.0150.0
-
5852485
-55 to +100-55 to +100
60
T int N.D. T int N.D.
R everse V oltage (IR =100µA) (V ) 5 55
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 55
D E S C R I P T I O N A N D F E A T U R E S
T-1 3/4 Ultrabright LED Lamps
1-89
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
.190±.010
.040 .340±.010
.900 MIN.
.020S Q.T Y P .
C AT HODEF LAT DE NOT E S
.230 DIA.
.050.050 R E F .
All dimensionsin inches.
The Ultrabright HLMP3X50 series are direct pin for pin replacements forHewlett Packard's HLMP3X50 series.These LED lamps provide a verynarrow viewing angle in a clear tinted non-diffused package and areexcellent for small area backlighting. A pale tint aids in identification.The High Efficiency Red and Yellow lamps are produced with GaAsP/GaPand the High Efficiency Green lamp is produced with GaP/GaP.All feature an 80 mcd minimum luminous intensity.
150.0150.0
90
-55 to +100-55 to +100
13524
565
-
80.03.0
2.220
C lear
H.E .G reenHLMP 3950
60
-55 to +100-55 to +100
8524
585
-
80.03.02.2
20C lear
Y ellowHLMP 3850HLMP 3750
T int N.D.
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 0.3% duty cycle) (mA)
P ackage T ype
V iewing Angle 20 1/2 (degrees)
H.E .R ed
C lear20
2.23.0
80.0150.0
-
63524
135-55 to +100-55 to +100
90
T int N.D. T int N.D.
R everse V oltage (IR =100µA) (V ) 5 55
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 55
D E S C R I P T I O N A N D F E A T U R E S
4302H-5V, 12V Series Integrated Resistor-5 Volt and 12 Volt Operation T-1 3/4 (5mm)
1-91
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
8888
52060
583
-
21512
13Amber
Amber4302H3-12V
52060
635
-
21512
13R ed
R ed4302H1-12V
5
1560
565
-
27.5
512
G reen
G reen4302H5-5V
51560
583
-
27.55
10Amber
Amber4302H3-5V4302H1-5V
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorR ated C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
Diffus ion
V iewing Angle 20 1/2 (degrees)
R ed
R ed10
57.528
-
63560155
Diffused Diffused Diffused Diffused
Luminous Intens ity Max. (mcd)
C ontinuous F orward C urrent Max. (mA)R everse B reakdown V oltage Min. (V )
8
52060
565
-
21512
13G reen
G reen4302H5-12V
Diffused
•Integral current limiting resistor.•TTL compatible-requires no external current limiting
resistor, will operate off 5 volt or 12 volt supply.•Cost effective-saves valuable board space, resistor
and assembly cost..194±.006
NOM..100
S Q.T Y P ..026±.003
.230±.010
.347±.010.030±.005
MAX..040
.050±.010
MIN..993
C AT HODE
All dimensionsin inches .
D E S C R I P T I O N A N D F E A T U R E S
T-1 3/4 Resistored LED Lamps
1-90
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
13.515.011.013.5
15.0
-40 to +85-40 to +85
-35
565
-
9.520.010.0
12G reen
G reenC MD333G D/HV 12
15.0
-40 to +85-40 to +85
-35
635
-
10.520.010.0
12R ed
H.E .R edC MD333ID/HV 12
7.5
-40 to +85-40 to +85
-35
585
-
8.015.0
10.05
Y ellow
Y ellowC MD333Y D/HV 5
7.5
-40 to +85-40 to +85
-35
565
-
9.515.010.0
5G reen
G reenC MD333G D/HV 5C MD333ID/HV 5
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )D.C . F orward V oltage (V )
Diffus ion
V iewing Angle 20 1/2 (degrees)
H.E .R ed
R ed5
10.015.010.515.0
-
63535-
-40 to +85-40 to +85
7.5
Diffused Diffused Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5 5 5 55
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 5 55
11.0
15.0
-40 to +85-40 to +85
-35
585
-
8.020.010.0
12Y ellow
Y ellowC MD333Y D/HV 12
Diffused
55
These T-1 3/4 LED lamps contain an integral resistor in series withthe emitter chip to allow their direct application into 5 and 12 voltcircuits. No external current limiting resistor is required.These lamps allow for savings in both component and assemblycost. These LEDs are compatible with all conventional solderingtechniques.
MIN.
1.00
.339
C AT HODE
S Q.T Y P .
.020±.003
.040
Ø.197
Ø.232
.040
All dimensions in inches.
D E S C R I P T I O N A N D F E A T U R E S
4301H1/5 Series Solid State LED Lamps-High Brite Bi-Color T-1 3/4 (5mm)
1-93
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
4301H1/5
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorR ated C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
P eak F orward C urrent @ 1ms-300 P P S (A)
Diffus ion
V iewing Angle 20 1/2 (degrees)
R ed/G reen
C lear10
2.22.836
-
650/56850
11525.06
-R everse B reakdown V oltage Min. (V )
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)C ontinuous F orward C urrent Max. (mA)
T-1 3/4 Dual Color LED
•Provides red and green in the same two lead packages.•Chips are brightness matched-green and red light is uniform.
R E D C AT HODE
G R E E N C AT HODE
Ø.220
.340
.197
.866
MIN..040
NOM..100
T Y P ..020 S Q.
.040
MAX..040
All dimensionsin inches .
D E S C R I P T I O N A N D F E A T U R E S
4361H1/5 Series High Brite Tri-Color T-1 3/4 LED Lamps
1-95
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
10.05.010.0
60
-30 to +100-25 to +85
7540
563
-
3.03.02.1
20C lear
G reen
60
-30 to +100-25 to +85
7540
610
-
1.52.8
2.120
C lear
Amber4361H3/5
60
-30 to +100-25 to +85
7540
563
-
3.03.02.1
20C lear
G reen4361H1/5
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 10% duty cycle) (mA)
Diffus ion
V iewing Angle 20 1/2 (degrees )
R ed
C lear20
2.03.02.26.3
-
6504060
-25 to +85-30 to +100
60
Diffused Diffused Diffused
R everse V oltage (IR =100µA) (V ) 3 3 33
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 55
Features
T-1 3/4 Tri-color LEDs•Provides red, green and amber in
same three lead package.•Chips are brightness matched.•Lights amber when both chips are
illuminated.
All dimensions in inches .
INDE XR E D
3:ANODE G R E E N
2:C AT HODE
1:ANODE R E D.020
321
T Y P .
.020 S Q.1.890
.196
.078 .684
.394
.472
.031
.196
.196
.212
.078
.048
D E S C R I P T I O N A N D F E A T U R E S
T-1 3/4 Bi-Color/Bi-Polar LED Lamps
1-94
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
The green/red CMD5491A Bi-Color LED lamp is awhite diffused, very wide view angle, dual chip,four-state lamp utilizing dark red AIGaAs and HighEfficiency Green GaP/GaP. AC driven, the LED lampappears orange. The CMD5094A is a red diffused, verywide view angle Bi-Polar red (AC) lamp utilizing redAIGaAs and High Efficiency Red GaAsP/GaP chips.Both are perfect for direct viewing and provideexcellent uniformity and visual appeal.
6.0
90
-55 to +100-55 to +100
13575
630/650
-
2.03.02.3
20White
R ed/H.E .R edC MD5094AC MD5491A
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 0.3% duty cycle) (mA)
Diffus ion
V iewing Angle 20 1/2 (degrees)
G reen/R ed
White20
2.33.02.06.0
-
568/650100135
-55 to +100-55 to +100
90
Diffused
D.C . F orward V oltage (mW) 413
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Average F orward C urrent (mA) 3030
C MD5094A(2) H.E .R . C AT HODE IN
C MD5491AF LAT DE NOT E S (1) G R E E N C AT HODE IN
NOM..100 R E F .
T Y P ..020 S Q.
Ø.230
.060±.005
NOM..100
NOM..050MIN.
.850
.470±.010
.040.340±.010
.190±.010
C AT HODEG R E E N
All dimensions in inches.
D E S C R I P T I O N A N D F E A T U R E S
T-1 Super Brite Bi-Color LED Lamps
1-92
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
V G
Y
Y
V R
V R
V G
All dimensions in inches.
These T-1 Bi-Color LED lamps provideexceptional light output in a variety ofcolor combinations. These lamps canprovide three-state status indication whentheir off-state White is included.They are available in a variety of colorcombinations, in wide view angle diffusedpackages.
10.510.51216
150
-40 to +85-40 to +85
10554
585
-
6.02.82.0
20White
Y ellowC MD336V Y V G W
150
-40 to +85-40 to +85
10554
585
-
6.02.82.0
20White
Y ellow
150
-40 to +85-40 to +85
10554
635
-
7.02.8
2.020
White
H.E .R edC MD336V R V Y W
150
-40 to +85-40 to +85
10554
565
-
9.02.82.1
20White
G reenC MD336V R V G W
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent (T <10 mS )
Diffus ion
V iewing Angle 20 1/2 (degrees)
H.E .R ed
White20
2.02.87.012
-
63554
105-40 to +85-40 to +85
150
Diffused Diffused Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5 5 5 55
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 5 55
16
150
-40 to +85-40 to +85
10554
565
-
9.02.82.1
20White
G reen
Diffused
55
(C MD336HG W)B R IG HT R E D ANODE
(C MD336E G W)G R E E N ANODE
.339±.012
.197±.008
.028±.008
.866
.100
MAX..059
T Y P ..020 S Q.
.226±.008
.040
D E S C R I P T I O N A N D F E A T U R E S
T-1 3/4 Super Brite Four-State LED Lamps
1-96
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
10.510.512.016.0
150
-40 to +85-40 to +85
10554
585
30
6.02.82.0
20White
Y ellowC MD339V Y V G W
150
-40 to +85-40 to +85
10554
585
30
6.02.82.0
20White
Y ellow
150
-40 to +85-40 to +85
10554
635
30
7.02.8
2.020
White
H.E .R edC MD339V R V Y W
150
-40 to +85-40 to +85
10554
565
25
9.02.82.1
20White
G reenC MD339V R V G W
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (T <10ms)
Diffus ion
V iewing Angle 20 1/2 (degrees)
H.E .R ed
White20
2.02.87.0
12.0
30
63554
105-40 to +85-40 to +85
150
Diffused Diffused Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5 5 5 55
F orward C urrent (mA)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 5 55
40.050.016.0
150
-40 to +85-40 to +85
10550
565
25
25.02.82.1
20White
G reen
150
-40 to +85-40 to +85
10550
660
30
30.02.4
1.720
White
R edC MD339-1S R V G W/S 150
150
-40 to +85-40 to +85
10554
565
25
9.02.82.1
20White
G reen
Diffused Diffused Diffused
5 5 55 5 5
These T-1 3/4 Super Brite LED lamps provide exceptionalluminous intensity compared to conventional LED lamps.Their unique design provides for four-state status indication.These lamps are available in a variety of color combinations,in both diffused and non-diffused packages.
Color designation example:
Anode #1 Anode #2
CMD339-1VRVGW
Ø.232±.012
Ø.197±.008
.100
.100
S Q.T Y P ..020
.035
.339±.012
.039±.008MAX.
.059
.551±.020
MIN..807
MIN..886
MIN..966
.039
C OMMON C AT HODE
G R E E N ANODE
Y E LLOW ANODE
All dimensionsin inches .
D E S C R I P T I O N A N D F E A T U R E S
4304H6 Solid State LED Lamps-High Brightness T-1 3/4 (5mm)
1-73
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
.339±.012
.039±.008
.197±.008
S Q.T Y P ..020
.100
.236±.010
MIN.1.039
MAX..059
MIN..039ANODE
All dimensions
in inches.
4304H6
Non-Diffused
P AR T NUMB E ROutput C olor
P ackage C olorR ated C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity T yp. (mcd)P eak Wavelength (nm)
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
ANODE
.100
Ø.128
Ø.114
T Y P .
.020 S Q.
.040
MIN.
1.00
.040
.177
All dimensionsin inches.
ANODE
.100
Ø.232
Ø.197
T Y P .
.020 S Q.
.0400
MIN.
1.00
.040
.339
T-1 T-1 3/4
These revolutionary new LED
lamps emit a true blue color
(430 nm) for those design
engineers looking for that fourth
status color. Lamps are
manufactured with state of the
art Silicon Carbide (SIC)
technology.
LED lamps are available in both
T-1 and T-1 3/4 package sizes,
in both diffused and non-diffused
lens types.
800350250
100
-20 to +80-20 to +80
9812
430
-
6005.54.9
20C lear
B lueC MD383UB C
100
-20 to +80-20 to +80
9824
430
-
2505.5
4.920
C lear
B lueC MD383UB C /H2
100
-20 to +80-20 to +80
9830
430
-
1605.54.9
20C lear
B lueC MD264UB CC MD264UB D
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 10% duty cycle) (mA)
Diffus ion
V iewing Angle 20 1/2 (degrees )
B lue
B lue20
4.95.563
100
-
4304598
-20 to +80-20 to +80
100
Non-Diffused Non-Diffused Non-Diffused
R everse V oltage (IR =100µA) (V ) 5 5 55
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 55
T -1 3/4T -1
D E S C R I P T I O N A N D F E A T U R E S
4301H1/1,H5/5, H7/7 Series Solid State LED Lamp-Bi-Polar-AC/DC Operation T-1 3/4
1-97
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
T-1 3/4 Super Brite (Green)Bi-Polar LEDs•Ideal for use on AC or DC where polarity cannot be determined.
2020
10
10560
590
30
5.02.5
2.120
Y ellow
Y ellow4301H7/7
4510560
565
25
5.02.52.2
20G reen
G reen4301H5/54301H1/1
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
Diffus ion
V iewing Angle 20 1/2 (degrees)
R ed
R ed20
2.02.58.020
30
62560
10512
Diffused Diffused
C ontinuous F orward C urrent Max. (mA)
P ower Diss ipation (mW)C apacitance @ V =O (mW/”C )
MIN.
1.063
.339
.100
C AT HODE
S Q.T Y P ..020
.039
Ø.197
Ø.232
All dimensions in inches.
D E S C R I P T I O N A N D F E A T U R E S
T-1 3/4 Flashing LED Lamps
1-98
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
These unique LED lamps have integral circuits that will flash the lampon and off continuously at frequencies from 1.5 to 2.5 Hz (dependingon the input voltage). These lamps make excellent, eye-catchingindication lamps. The lamps provide the ability to save not onlycomponent cost but assembly cost for those design engineers requiringa flashing indicator light.
100.08.07.05.0
60
0 to +700 to +70
8545
660
3.0
20.013.05.0
20R ed
R edC MDF 333S R D/L2
60
0 to +700 to +70
8545
635
3.0
3.013.05.0
20R ed
H.E .R edC MDF 333ID
60
0 to +700 to +70
8545
585
3.0
2.513.0
5.020
Y ellow
Y ellowC MDF 333Y D
60
0 to +700 to +70
8545
565
3.0
2.013.05.0
20G reen
G reenC MDF 333G DC MDF 333HD
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )F orward C urrent (mA)
Diffus ion
V iewing Angle 20 1/2 (degrees)
R ed
R ed20
5.013.01.54.0
3.0
6974585
0 to +700 to +70
60
Diffused Diffused Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5 5 5 55
B linking F requency at 5.0 V DC (Hz)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 5 55
MIN.
1.00
.339
.100
C AT HODE
S Q.T Y P ..020
.040
.197
Ø.232
.040
All dimensions in inches.
D E S C R I P T I O N A N D F E A T U R E S
4300HLC Series Solid State LED Lamps-Low Current T-1 3/4 (5mm)
1-99
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
T-1 3/4 Brite LEDs•Low Current-requires only 2 mA.•Ideal for limited current power supplies.
2.12.3
4
2450
583
7
1.02.7
1.92
Y ellow
Y ellow4300H7LC
42450
565
7
1.02.21.8
2G reen
G reen4300H5LC4300H1LC
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorR ated C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
Diffus ion
V iewing Angle 20 1/2 (degrees)
R ed
R ed2
1.82.21.32.3
7
63550274
Diffused Diffused
C ontinuous F orward C urrent Max. (mA)
P ower Diss ipation (mW)C apacitance @ V =O (mW/”C )
5.007
5.007P eak F orward C urrent @ 1Ms-300 P P S (A) .007
5R everse B reakdown V oltage Min. (V )
MIN.
1.00
.340±.010
.100
C AT HODE
S Q.T Y P .
.020±.003
.040
.190±.010
Ø.230
.050
All dimensions in inches.
D E S C R I P T I O N A N D F E A T U R E S
5705H Series T-1 3/4 LED with Extended Leads-Ultra Brite Non-Diffused Narrow Beam
1-100
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
T-1 3/4 Brite LEDs
Wire Leads: No. 24AWG4.60±.200 STRIPPED .430/.570
Anode(+): Red Lead
Lens: Ideal for use with 4311 or4321 Series lenses (See page 0-0)
5
45
60
6060
3.0
3.0
3.0
2.1
2.1
2.0
Y ellow
G reen
R ed
R everseB reakdownV oltage Min.
(V ).
C ontinuousF orwardC urrent Max.(mA)(V )
Max.(V )
T yp.
F orward V oltageE mittedC olor
P art Number
5705H1
5705H5
5705H7
T ypicalIntens ity(mcd)
68
100
160 20
20
20
R atedC urrent(mA)
585
563650
P eakWave Length
(nm)
4.60±.200
T -1 3/4 S IZE
LE D
INS ULAT E D
ONE C R IMP
C R IMP B R AS S (2)
All dimensions in inches.
D E S C R I P T I O N A N D F E A T U R E S
T-2 1/2 Super Brite LED Lamps
1-101
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
These T-2 1/2 (8mm) LED lamps provide exceptional luminousintensity in a larger diameter package. These lamps are ideal forapplications requiring a predominant indicator/status light.Lamps are available in both wide view angle (diffused) and narrowview angle (non-diffused) packages. Luminous intensities as highas 300 mcd in non-diffused packages are available.
63.013.015.015.0
150
-40 to +85-40 to +85
10540
565
-
40.02.82.1
20G reen
G reenC MD393V G D
150
-40 to +85-40 to +85
10536
585
-
4.02.82.0
20Y ellow
Y ellowC MD393Y D
150
-40 to +85-40 to +85
10536
565
-
5.02.8
2.120
G reen
G reenC MD393G D
150
-40 to +85-40 to +85
10536
635
-
5.02.82.0
20Orange
H.E .R edC MD393E DC MD393ID
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (T <10ms) (mA)
Diffus ion
V iewing Angle 20 1/2 (degrees)
H.E .R ed
R ed20
2.02.85.0
15.0
-
63536
105-40 to +85-40 to +85
150
Diffused Diffused Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5 5 5 55
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 5 55
300.030.0
150
-40 to +85-40 to +85
10516
660
-
160.02.4
1.720
C lear
R edC MD393HR C -3
150
-40 to +85-40 to +85
10540
635
-
16.02.82.0
20R ed
H.E .R edC MD393V R D
Diffused Non-Diffused
5 55 5
MIN.
1.06
.433
.100
C AT HODE
S Q.T Y P .
.020±.003
.079
Ø.315
Ø.354
.060
All dimensions in inches.
D E S C R I P T I O N A N D F E A T U R E S
T-3 1/4 Super Brite LED Lamps
1-102
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
400.0400.070.070.0
150
-40 to +85-40 to +85
1058
585
-
250.02.82.1
20C lear
Y ellowC MD1363V Y C
150
-40 to +85-40 to +85
1058
565
-
250.02.82.1
20G reen
G reenC MD363V G T
150
-40 to +85-40 to +85
10520
585
-
30.02.8
2.020
Y ellow
Y ellowC MD363V Y D
150
-40 to +85-40 to +85
10520
565
-
30.02.82.1
20G reen
G reenC MD363V G DC MD363V R D
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (T <10ms) (mA)
Diffus ion
V iewing Angle 20 1/2 (degrees)
H.E .R ed
R ed20
2.02.8
25.040.0
-
63520
105-40 to +85-40 to +85
150
Diffused Diffused T inted Non-Diffused
R everse V oltage (IR =100µA) (V ) 5 5 5 55
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 5 55
2000.01000.0
150
-40 to +85-40 to +85
1058
660
-
1100.02.4
1.720
C lear
R edC MD1363UR C -2
150
-40 to +85-40 to +85
1058
660
-
600.02.41.7
20C lear
R edC MD1363UR C -1
Non-Diffused Non-Diffused
5 55 5
3000.0
150
-40 to +85-40 to +85
1058
660
-
2000.02.4
1.720
C lear
R edC MD1363UR C -3
Non-Diffused
55
MIN.
1.06
.531
.100
C AT HODE
S Q.T Y P .
.020
.079
.394
Ø.433
.060
All dimensions in inches. These T-3 1/4 (10mm) LED lamps provide exceptional luminousintensity in a larger diameter package. These lamps are ideal forapplications requiring a predominant indicator/status light.Lamps are available in both wide view angle (diffused) and narrowview angle (non-diffused) packages. Luminous intensities as highas 3000 mcd in non-diffused packages are available.
D E S C R I P T I O N A N D F E A T U R E S
4366C Series Solid State LED Lamps-Super Brite "Popsicle" 2.5mm x 5mm
1-103
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
•High intensity light output.•Semi-round top provides wide-angle visibility.•Ideal for modern styling.
1.102.028 MAX.
.040 MAX.
ANODE (+)
.028 MAX.
.217±.012
.197±.008
.335±.008
1.024 MIN.
.098
S Q. NOM..020±.004
.098±.008
All dimensions in inches.
580
560
605
660
2.8
2.8
2.82.0
2.2
2.1
2.21.7
20
20
20
20
24
24
24
24
12
12
12
12
Y ellow
G reen
Amber
R ed
(V )Max.
(V )T yp.
(mcd)T yp.
(mcd)Min.
(degrees)Angle
V iewing
(nm)Wavelength
P eakF orward V oltageLuminous Intens ityE mittedC olor
P art Number
4366C 1
4366C 3
4366C 5
4366C 7
C olorLens
R ed
Amber
G reen
Y ellow Diffused
Diffused
Diffused
Diffused
P ackageT ype
30
25
25
50
4
4
4
4
V oltage Min.(V )
B reakdownR everse
C urrent Max.(nm)
F orwardC ontinuous
D E S C R I P T I O N A N D F E A T U R E S
2 x 5mm Rectangular LED Lamps
1-105
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
These rectangular LED lamps provide a 2 x 5mmlighted surface area. Stackable in X or Y direction,these lamps are typically used as legend backlighting,illuminated push buttons, panel indicators and bargraph meters. The High Efficiency Red and Yellowlamps are produced with GaAsP/GaP and the HighEfficiency Green lamp is produced with GaP/GaP.
4.04.0
90
-55 to +100-55 to +100
120100635
-
1.04.0
2.020
R ed
H.E .R edC MD57123
90
-55 to +100-55 to +100
120100562
-
1.04.02.2
20G reen
H.E .G reenC MD54123C MD53123
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max.(1ms pulse width 300pps)(mA)
Diffus ion
V iewing Angle 20 1/2 (degrees)
Y ellow
Y ellow20
2.14.01.04.0
-
585100120
-55 to +100-55 to +100
90
Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5 55
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 55
.295
MIN.
1.00
NOM.
.050
.197±.005
.078±.005
.100
S Q.T Y P .
.020±.003ANODE
All dimensions in inches.
D E S C R I P T I O N A N D F E A T U R E S
4306D Series Solid State LED Lamps-Rectangular 2 x 5mm
1-106
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
Rectangular 2 x 5mm shape•High intensity light output uniformly spread over
front surface.•Ideal for flush mounted panel indicators or for
backlighting legends.
4.04.04.0
.15
530
105100625
-
3.23.02.0
20Amber
Amber4306D23
.1
535
120100585
-
1.03.0
2.120
Y ellow
Y ellow4306D17
.09
530
120100562
-
1.03.02.2
20G reen
G reen4306D154306D11
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
R everse B reakdown V oltage Min. (V )P eak F orward C urrent @ 1 Ms-300 P P S (A)
Diffus ion
V iewing Angle 20 1/2 (degrees)
R ed
R ed20
2.03.01.04.0
-
635100120355
.1
Diffused Diffused Diffused
Derate Linearly from 25°C 1.6 1.6 1.61.8
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)C ontinuous F orward C urrent Max. (mA)
C apacitance @ V =0 (pF ) 20 45 4545
.295
MIN.
1.00
NOM.
.040
.198±.004
.079±.004
.100
S Q.T Y P .
.020±.003ANODE
All dimensions in inches.
D E S C R I P T I O N A N D F E A T U R E S
4306R Series Rectangular 2.4 x 7.3mm SMT LEDs
1-108
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
Features:
Rectangular High Brite LED•High Efficiency red GaAsP on GaP.•High intensity light output uniformly spread
over front surface.•Ideal for flush mounted panel indicators or
for backlighting legends.
5.07.03.5
.06
53085
100583
17
3.03.02.2
20Y ellow
Y ellow4306R 7
.09
530
135100565
18
1.53.0
2.320
G reen
G reen4306R 5
.09
530
135100600
6
1.53.02.2
20Amber
Amber4306R 34306R 1
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorR ated C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
R everse B reakdown V oltage Min. (V )P eak F orward C urrent Max. (1ms-300pps) (A)
Diffus ion
V iewing Angle 20 1/2 (degrees)
R ed
R ed25
2.13.02.55.0
17
635100135305
.09
Diffused Diffused Diffused
C apacitance @ V =0 (pF )
P ower Diss ipation (mW)C ontinuous F orward C urrent Max. (mA)
.315
.290
MIN.
1.00
NOM.
.040
.285±.010
.095
.100
S Q.T Y P .
.020±.003ANODE
All dimensions in inches.
LIG HT E MIT T ING S UR F AC E
D E S C R I P T I O N A N D F E A T U R E S
4362D1/5 Series Solid State LED Lamps-Rectangular 1.8 x 5.3mm Tri-Color
1-111
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
4362D1/5
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorR ated C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
Diffus ion
V iewing Angle 20 1/2 (degrees)
R ed/G reen
C lear15.0
2.22.8
.25/1.5.6/4.5
-
700/56560
11520
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)C ontinuous F orward C urrent Max. (mA)
•Tri-color LED - red, green and amber LED chipin same lamp.
•Rectangular shape - diffused lens.•Red and green light output is uniform.•3 leaded design with common cathode.
R E DANODE
(C OMMON)C AT HODE
G R E E NANODE
MAX..059
.040
.020±.004
.079±.008
.071±.008
.157±.008
.217±.008
.209±.008
1.043±.040
.315±.008
.236±.008
.079
.232±.012MAX..157
.100 .100
(3).020±.004
MAX.(2).043
.059
.059
All dimensions in inches.
D E S C R I P T I O N A N D F E A T U R E S
4363D1/5 Series Solid State LED Lamps-Tri-Color 2mm x 5mm
1-112
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
•3 lead design provides 3 color output.•Two chips matched for brightness.•Rectangular shape.•Diffused on surface, even light distribution,
wide viewing angle.
4.0
90
525
135100565
18
2.62.72.1
20C lear
G reen4363D1/5
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorR ated C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
R everse B reakdown V oltage Min. (V )P eak F orward C urrent Max. (1ms-300pps) (mA)
Diffus ion
V iewing Angle 20 1/2 (degrees)
R ed
C lear20
1.92.42.13.5
11
635100135255
90
Diffused
C apacitance @ V =0 (pF )
P ower Diss ipation (mW)C ontinuous F orward C urrent Max. (mA)
NOM..050
(S HOR T LE AD)R E D ANODE G R E E N ANODE
NOM..050
NOM..100
C OMMON C AT HODE
S Q. T Y P ..020
MIN.1.00
.302±.013
.206±.010
.199±.005
.088±.007
.083±.005
All dimensions in inches.
D E S C R I P T I O N A N D F E A T U R E S
4364D1/5, 4364D3/7, and 4364D5/7 Series
1-110
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
Color Combinations:•Red/Green•Amber/Yellow•Green/Yellow
12.512.4
60555/590
5.0
2.2/2.120
White
G reen/Y ellow4364D5/7
60610/590
5.02.1
20C lear
Amber/Y ellow4364D3/74364D1/5
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity Max. (mcd)P eak Wavelength (nm)
Diffus ion
V iewing Angle 20 1/2 (degrees)
R ed/G reen
C lear20
2.0/2.25.0
20/12.5625/565
110
Diffused Diffused
R E D ANODE
MAX..040
.197±.010
.100±.010S Q.T Y P ..019.020
.060±.010
MIN.1.063
.276±.010
.079±.010
All dimensionsin inches .
D E S C R I P T I O N A N D F E A T U R E S
High Performance Rectangular LED Lamps
1-104
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
The CMD5X124A Series of highperformance rectangular LED lampswith reflector cap has beenengineered for superior light uniformity.Designed for direct viewing and legendbacklighting, these lamps are stackablein X or Y direction without crosstalk.The white diffused Green/Red dual chiplamp is produced with GaP/GaP andAIGaAs. The High Efficiency Red andYellow lamps are produced withGaAsP/GaP and the High EfficiencyGreen lamp is produced with GaP/GaP.Typical applications include legendbacklighting, panel indication andhigh quality bar graphs.
All dimensions in inches.
6.06.06.0
90
-55 to +100-55 to +100
120100
562/660
-
1.03.02.2
20White
H.E .G reen/R edC MD49124A
90
-55 to +100-55 to +100
120100635
-
1.03.0
2.020
R ed
H.E .R edC MD57124A
90
-55 to +100-55 to +100
120100562
-
1.03.02.2
20G reen
H.E .G reenC MD54124AC MD53124A
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 0.3% duty cycle) (mA)
Diffus ion
V iewing Angle 20 1/2 (degrees)
Y ellow
Y ellow20
2.03.01.06.0
-
585100120
-55 to +100-55 to +100
90
Diffused Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5 5 55
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 55
C AT HODE
.245
.145.125 .225
.280
.015 NOM.
.020 S QT Y P .
.100
.800 MIN.
.145 NOM.
.060 NOM.
.050 NOM.
D E S C R I P T I O N A N D F E A T U R E S
HLMP Rectangular LED Lamps 2.5 x 7.4mm
1-109
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
The HLMP0X0X Series of rectangular LED lamps aredirect pin for pin replacements to Hewlett Packard'sHLMP0X0X Series. Stackable in X or Y direction,these lamps provide a very wide view angle and areintended for direct viewing. The High Efficiency Red andYellow lamps are produced with GaAsP/GaP and the HighEfficiency Green lamp is produced with GaP/GaP.
3.05.02.55.0
90
-55 to +100-55 to +100
135100565
30
1.53.02.3
20G reen
H.E .G reenHLMP 0503
90
-55 to +100-55 to +100
135100585
30
3.03.02.2
20Y ellow
Y ellowHLMP 0401
90
-55 to +100-55 to +100
135100585
30
1.53.0
2.220
Y ellow
Y ellowHLMP 0400
90
-55 to +100-55 to +100
135100635
30
2.53.02.1
20R ed
H.E .R edHLMP 0301HLMP 0300
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
S torage T emperature (°C )P eak F orward C urrent Max. (1µs @ 0.3% duty cycle) (mA)
Diffus ion
V iewing Angle 20 1/2 (degrees)
H.E .R ed
R ed20
2.13.01.02.5
30
635100135
-55 to +100-55 to +100
90
Diffused Diffused Diffused Diffused
R everse V oltage (IR =100µA) (V ) 5 5 5 55
Average F orward C urrent (mA)
P ower Diss ipation (mW)Operating T emperature (°C )
Lead S older T ime @ 260°C 5 5 5 55
5.0
90
-55 to +100-55 to +100
135100565
30
2.53.02.3
20G reen
H.E .G reenHLMP 0504
Diffused
55
.315
.290
MIN.
1.00
NOM.
.050
.285±.010
.095
.100
S Q.T Y P .
.020±.003ANODE
All dimensions in inches.
LIG HT E MIT T ING S UR F AC E
D E S C R I P T I O N A N D F E A T U R E S
Rectangular Flanged LED Lamps
1-107
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
4.04.54.0
150
5-40 to +85
105150635
-
2.02.82.0
20Orange
H.E .R edC MD513E D
150
5-40 to +85
105150585
-
3.02.8
2.120
Y ellow
Y ellowC MD513Y D
150
5-40 to +85
105150565
-
2.02.82.1
20G reen
G reenC MD513G DC MD513ID
Diffused
P AR T NUMB E ROutput C olor
P ackage C olorT est C urrent (mA)F orward V oltage T yp. (V )F orward V oltage Max. (V )Luminous Intens ity Min. (mcd)Luminous Intens ity T yp. (mcd)
P eak Wavelength (nm)
Lead S older T ime at 260°CP eak F orward C urrent (T <10ms)
Diffus ion
V iewing Angle 20 1/2 (degrees)
H.E .R ed
R ed20
2.02.82.04.0
-
635150105
-40 to +855
150
Diffused Diffused Diffused
R everse V oltage (IR =100µA) 5.0 5.0 5.05.0
Luminous Intens ity Max. (mcd)
P ower Diss ipation (mW)S torage/Operating T emperature
F orward C urrent (mA) 25 30 3030
.276
MIN.
.925
NOM.
.040
.197
.110
.100
S Q.T Y P .
.020±.003ANODE
All dimensions in inches.
.028
.080
These rectangular LED lamps with flanges provide a2 x 5mm lighted surface area. Lamps are tinteddiffused and are intended for direct viewing.Applications include legend backlighting, illuminatedpush buttons and panel indicators.The High Efficiency Red and Yellow lamps are producedwith GaAsP/GaP, the High Efficiency Green lamp isproduced with GaP/GaP, and the Orange lamp isproduced with a GaAsP/GaP chip in an orange tinteddiffused package.
D E S C R I P T I O N A N D F E A T U R E S
Lens Retainer Clip
1-122
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
O U T L I N E D I M E N S I O N S
Series 4740, 4750 Lenses
Mounting: Rear snap-on to lens models 4741, 4751. Will snapfit into .030-.093 thick panel in a .312-.317 mounting hole.
Lens: Polycarbonate
Clip: Natural acetal
Note: Order model 4740 lens retainer clip and appropriate lens separately.
Lens Color Low Profile Model No. Dome Model No.
Red
Clear
Amber
White
Green
Blue
Yellow
4741
4742
4743
4744
4755
4746
4747
4751
4752
4753
4754
4755
4756
4757
Material: Acetel, NaturalLens Retainer Clip
Ø.400MAX.
.240
C ONDIT IONR E LAXE D.680 IN
LE NS
C LIPR E T AINE RLE NS
Ø.380
Ø.310
Ø.270
.090
.330
.030
.190
R ING SDIF F US INGLIG HT
Ø.380
.250
.480.190
Ø.310
Ø.270
R ING SDIF F US INGLIG HT
All dimensions in inches .
Low Profile Dome
#4741-4747Lens
#4751-4757Lens
#4740 Clip
P anel T hickness R ange: .030 - .093(.76 - 2.36)
Mounting Hole Diameter: .317 (8.05).312 (7.93)
D E S C R I P T I O N A N D F E A T U R E S
Mounting Clips for T-1 (3mm) & T-1 3/4 (5mm) LEDs
1-118
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
O U T L I N E D I M E N S I O N S O U T L I N E D I M E N S I O N S
P ANE L MAX. .125MOUNT ING HOLE Ø.250
Ø.250
Ø.280
Ø.310
Ø.360
.165±.015
.025
.265
Ø.240
.140
Ø.210
Ø.120
.020.210
P ANE L MAX. .130MOUNT ING HOLE Ø.180
Note: use with "F" Series LEDs Note: use with "H" Series LEDs
R ingC lip
Lamp Holder C ollar
Series 4303MC
•This attractive and economical mounting clipinstalls quickly and provides secure mountingfor T-1 high dome LEDs such as 4303F Series.
Material: Black polypropylene
Mounting Hole: Ø.180 min. in panels up to.130 thick.
Series 4304MC
•This attractive and economical mounting clipinstalls quickly and provides secure mounting forT-1 3/4 high dome LEDs such as 4301H, 4304H,4305H or 4308H Series.
Material: Black polypropylene
Mounting Hole: Ø.250 min. in panels up to.125 thick.
All dimensions in inches .
D E S C R I P T I O N A N D F E A T U R E S
Panel Mount Lenses for T-1 (3mm) LEDs
1-119
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
O U T L I N E D I M E N S I O N S O U T L I N E D I M E N S I O N S
Series 4331, 4332, 4333, 4335, 4336, 4337
•This is a smaller version of the 4311 series lenses andis designed for T-1 LEDs rather than T-1 3/4 LEDs.The plastic lens provides protection against electrostaticdischarge.
Material: Polycarbonate
Mounting Hole: Snap into Ø.170-.174 hole in panels.030-.060 thick.
Series 4351 thru 4357
•Attractive snap-in panel lenses provide wide-angle viewingplus mechanical security and electrostatic dischargeprotection. Ideal for use with T-1 LEDs such as 4303F series.
Material: Polycarbonate
Mounting Hole: Snap into Ø.187-.192 hole in panels.020-.097 thick.
.170
Ø.190
.150
.290
.210
.270
.460
DIF F US ION R ING S
HAS F R E S NE L
LE NS HOUS ING
DIF F US ION R ING S
HAS F R E S NE L
LE NS HOUS ING
All dimensions in inches .
4337 Yellow
4336 Blue
4335 Green
4333 Amber
4332 Clear
4331 Red
MODE L LE NS C OLOR
4357 Yellow
4356 Blue
4355 Green
4354 White
4353 Amber
4352 Clear
4351 Red
MODE L LE NS C OLOR
D E S C R I P T I O N A N D F E A T U R E S
Panel Mount Lenses for T-1 3/4 (5mm) LEDs
1-120
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
O U T L I N E D I M E N S I O N S O U T L I N E D I M E N S I O N S
Series 4311, 4312, 4313, 4315, 4316, 4317
•These lenses provide quick and economical panelmounting, plus electrostatic discharge protection,for T-1 3/4 high dome LEDs. Molded-in Fresnelrings spread light evenly, provide wide viewingangle viewing (up to 180°) and bright attractiveappearance. Use with narrow-beam LED series4305H, 4308H and 4310H.
Material: Polycarbonate
Mounting Hole: Snap into Ø.248-.248 hole in panels.060-.130 thick.
Series 4321, 4323, 4322, 4325, 4326, 4327
•These lenses provide quick and economical panelmounting, plus electrostatic discharge protection, forT-1 3/4 high dome LEDs. Molded-in Fresnel rings spreadlight evenly, provide wide viewing angle viewing (up to 180°)and bright attractive appearance. Use with narrow-beamLED series 4305H, 4308H and 4310H.
Material: Polycarbonate
Mounting Hole: Snap into .248-.248 square hole in panels.060-.130 thick. Square lenses may also be gang mountedin slotted hole .280 times number of lenses minus .030 long.
All dimensions in inches .
4317 Yellow
4316 Blue
4315 Green
4313 Amber
4312 Clear
4311 Red
MODE L LE NS C OLOR
4327 Yellow
4326 Blue
4325 Green
4323 Amber
4322 Clear
4321 Red
MODE L LE NS C OLOR
Ø.280
Ø.250
.220
.440
.250 S Q.
.280
.440
.220
.280
D E S C R I P T I O N A N D F E A T U R E S
Panel Mount Lenses for T-1 3/4 (5mm) LEDs
1-120
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central Avenue
Hackensack, New Jersey 07601
Tel: 201-489-8989 ï Fax: 201-489-6911CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
O U T L I N E D I M E N S I O N S O U T L I N E D I M E N S I O N S
Series 4311, 4312, 4313, 4315, 4316, 4317
ïThese lenses provide quick and economical panel mounting, plus electrostatic discharge protection, for T-1 3/4 high dome LEDs. Molded-in Fresnel rings spread light evenly, provide wide viewing angle viewing (up to 180∞) and bright attractive appearance. Use with narrow-beam LED series 4305H, 4308H and 4310H.
Material: Polycarbonate
Mounting Hole: Snap into ÿ.248-.252 hole in panels.060-.130 thick.
Series 4321, 4323, 4322, 4325, 4326, 4327
ïThese lenses provide quick and economical panel mounting, plus electrostatic discharge protection, for T-1 3/4 high dome LEDs. Molded-in Fresnel rings spread light evenly, provide wide viewing angle viewing (up to 180∞) and bright attractive appearance. Use with narrow-beam LED series 4305H, 4308H and 4310H.
Material: Polycarbonate
Mounting Hole: Snap into .248-.252 square hole in panels .060-.130 thick. Square lenses may also be gang mounted in slotted hole .280 times number of lenses minus .030 long.
All dimensions in inches.
4317 Yellow
4316 Blue
4315 Green
4313 Amber
4312 Clear
4311 Red
MODEL LENS COLOR
4327 Yellow
4326 Blue
4325 Green
4323 Amber
4322 Clear
4321 Red
MODEL LENS COLOR
Ø.280
Ø.250
.220
.440
.250 SQ.
.280
.440
.220
.280
D E S C R I P T I O N A N D F E A T U R E S
Panel Mount Lenses for T-1 3/4 (5mm) LEDs
1-121
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
O U T L I N E D I M E N S I O N S O U T L I N E D I M E N S I O N S
Series 4341 thru 4347
•Attractive snap-in panel lenses provide wide-angleviewing plus mechanical security and electrostaticdischarge protection. Generous clearance and"forgiving" optics speed product assembly. Ideal foruse with narrow beam LEDs, such as 4305H, 4308Hor 4310H series-or use with incandescent or neonlamps.
Material: Polycarbonate
Mounting Hole: Snap into Ø.354-.360 hole in panels.030-.080 thick.
Series 4371, 4372, 4375, 4376, 4377 Lenses;
4370 Spacer
•These low profile lenses provide quick and economicalpanel mounting for T-1 3/4 high dome LEDs. Molded-inFresnel rings spread light evenly, provide wide viewingangle and bright attractive appearance. Use with narrowbeam LED series 4305H, 4308H and 4310H.
Material: Polycarbonate
Mounting Hole: Snap into Ø.248/.252 hole in panels.030-.250 thick.
All dimensions in inches .
4370 Spacer
4377 Yellow
4376 Blue
4375 Green
4372 Clear
4371 Red
MODE L LE NS C OLOR
4347 Yellow
4346 Blue
4345 Green
4344 White
4343 Amber
4342 Clear
4341 Red
MODE L LE NS C OLOR
Ø.250
Ø.360
.127
.070
.430
Ø.250
.280
Ø.390
Ø.320
Ø.350
.200
.250
.190
R ING SLIG HT DIF F US ING
Spacer
Panel Mounting Accessories for LED Lamps
1-117
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
S E C T ION B -BS E C T ION A-A
AP P LIC AB LE LAMP ST AP E R E D T O MAT E
.265
.025
.165±.015
Ø.360
Ø.282
Ø.310
Ø.175
Ø.280
Ø.250
BBAA
for tapered s ide T -1 3/4 LE D lamps maximum panel thickness : .125recommended hole DIA.: .250 material: black polypropylene
Lamp Holder C ollar
CMP22
S E C T ION B -BS E C T ION A-A
.265
.025
.165±.015
Ø.360
Ø.282
Ø.310
Ø.175
Ø.280
Ø.250
BBAA
for straight s ided T -1 3/4 LE D lamps maximum panel thickness : .125recommended hole DIA.: .250 material: black polypropylene
Lamp Holder C ollar
CMP52
for all C MD5X124A LE D lampsmaximum panel thickness : .125recommended hole DIA.: .312 x .219material: black polypropylene
CMP65CMP100
for all T -1 and T -100 LE D lamps (except C MD5X74 and C MD5X77)maximum panel thickness : .062recommended hole DIA.: .172material: black polypropylene
CM4999-00X
R ING
G R OMME T
.370
.120/.123
.072/.075.270
.320
.300
.200
.270 .203
.370
.304
LE D WIT H WIR E LE ADSLE D ONLY
1/4 - 40 T HD.MOUNT ING B US HING
INS ULAT E D WIR E . LE ADS OUT T O C US T . S P E C .).S P E C IF IE D, ALS O AV AILAB LE W/ 26 G A.LE D (NOT S UP P LIE D W/ INDIC AT OR UNLE S S
1/4 - 40 T HD. X .115 DP
C OLLAR I.D..205
MAX..312
.187.370
.355
.062
T his panel mount bushing assembly may beused with any flanged T -1 3/4 LE D lamp.recommended hole DIA.: .250 clearancemaximum panel thickness : .190material: B ushing - Nyloncollar: B rass
Part No. Collar Color
4999-002
4999-003
Silver
Black
MAT T E F INIS H
Ø.230 Ø.120
Ø.165
.190
.020
All dimensions in inches.
D E S C R I P T I O N A N D F E A T U R E S
5330H Series Variable Height LED T-1 3/4 (5mm) Lamp Assembly
1-126
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
Features
•Block mounting design and spacing-alignmentsaves assembly cost and time.
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
Features
•Block mounting, height andspacing alignment savesassembly cost and time.
•Super Brite LEDs, high intensitylight output, diffused lens.
•Built-in resistor chip operates off5V or 12V supply without externalresistor.
•Standoffs prevent flux entrapment.
Housing: Black Nylon, UL94V-O
Alternate LEDs are also available inthis package as a standard variation.
Part
Number Color
Typ.
Intensity
(mcd)
Rated
Current
(mA)
Continuous
Forward
Current Max.
(mA)
Forward
Voltage Typ.
(V)
Forward
Voltage Max.
(V)
Peak Forward
Current @ 1ms-
300pps (A)
Reverse
Break-down
Voltage Min.
(V)
Peak
Wavelength
(nm)
5380H1
5380H3
5380H5
5380H7
5380H1LC
5380H5LC
5380H7LC
5380H1-5V
5380H3-5V
5380H5-5V
5380H1-12V
5380H3-12V
5380H5-12V
Red
Amber
Green
Yellow
Red
Green
Yellow
Red
Amber
Green
Red
Amber
Green
6.3
10
10
6.3
2.3
2.3
2.1
8
8
8
8
8
8
10
10
10
10
2.0
2.0
2.0
10
10
10
12
12
12
60
60
60
60
7
7
7
15
15
15
15
15
15
2.0
2.0
2.2
2.1
1.8
1.8
1.9
5
5
5
12.0
12.0
12.0
3.0
3.0
2.5
3.0
2.2
2.2
2.7
7.5
7.5
7.5
15.0
15.0
15.0
1.0
1.0
.09
1.0
.007
.007
.007
-
-
-
-
-
-
5
5
5
5
5
5
5
5
5
5
5
5
5
650
608
563
585
635
565
585
635
583
565
635
583
565
ANODE (+)5380E 1-DIM.130
.240
.100
.240
.130 MIN.
.200 MAX.
.210
.200
.020
.240
C AT HODENOT C H DE NOT E S
All dimensions in inches .
D E S C R I P T I O N A N D F E A T U R E S
5390 Series T-1 3/4 Right Angle LED Assembly
1-140
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
Features
Piggy back mounts on 5300E and H Series;5307H, 5308H, 5640E and H Series.•Easy installation-slides onto 5300 series blocks.•Allows 2 LEDs in the same board area required
for a single LED.•Diffused lens provides high contrast ratio, high
light output.
Housing: Black Nylon
Alternate LEDs are also available in this package
as a astandard variation.
Part
Number Color
Typ.
Intensity
(mcd)
Rated
Current
(mA)
Continuous
Forward
Current Max.
(mA)
Forward
Voltage Typ.
(V)
Forward
Voltage Max.
(V)
Reverse
Break-down
Voltage Min.
(V)
Peak
Wavelength
(nm)
5390H1
5390H3
5390H5
5390H7
5390H1LC
5390H5LC
5390H7LC
5390H1-5V
5390H3-5V
5390H5-5V
Red
Amber
Green
Yellow
Red
Green
Yellow
Red
Amber
Green
6.3
10
10
6.3
2.3
2.3
2.1
8
8
8
10
10
10
10
2.0
2.0
2.0
10
10
12
60
60
60
60
7
7
7
15
15
15
2.0
2.0
2.2
2.1
1.8
1.8
1.9
5
5
5
3.0
3.0
3.0
3.0
2.2
2.2
2.7
7.5
7.5
7.5
5
5
5
5
5
5
5
5
5
5
650
608
563
585
635
565
585
635
583
565
Note: 5390 Series piggy-back
block slides onto 5300H block,
must be pre-assembled before
inserting in PC board..240
.100
.130 MIN.
.500
.130
.382
ANODE (+)
.190±.020
.130 .360
.200
.100
.390
5302H S E R IE S5300H S E R IE SC AT ALOG MODE L
All dimensions in inches .
D E S C R I P T I O N A N D F E A T U R E S
5640 Series T-1 3/4 Right Angle 4 Wide LED Assembly
1-138
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
585
563
608
650
3.0
3.0
3.03.0
2.1
2.2
2.02.0
5.0
5.0
5.0
5.0
35.0
30.0
35.0
35.0
10
10
10
10
Y ellow
G reen
Amber
R ed
(V )Max.
(V )T yp.
C ontinuousF orwardC urrent Max.(mA)
R atedC urrent(mA)
R everseB reakdown
V oltage Min.(V ) (nm)Wavelength
P eakF orward V oltageE mittedC olor
P art Number
1
3
5
7 6.3
10.0
10.0
6.3
T ypicalIntens ity(mcd)
7
Y ellow
5
G reen
1
R ed
LE D 3
Amber
Model No. is as follows: 5640H ; ; ;
When specifying all 4 LE Ds of the same type -E xample: 4 each 5 volt red LE Ds , the part number is 5640H1-5VWhen specifying a variety of colors -E xample: P os ition 1 is green, pos ition 2 is red, pos ition 3 is yellow, pos ition 4 is amber. All s tandard voltage.T he part number is 5640H5;1;7;3.
Alternate LE Ds are also available in this package as a standard variation.
T he user who may have a requirement calling for various color/electrical specifications , a part number can be determinedby referring to the chart shown below.
P os . 1 P os . 2
F eatures :•Quad assembly with 4 LE Ds permits
easy installation-assures matchedheight and center to center spacing,reduces assembly time and costs .
•S uper B rite LE Ds•High contrast ratio.•Low current - only 2mA•B uilt-in res is tor chips - operates off
5 volt or 12 volt supply withoutexternal res is tor.
•S tandoffs prevent flux entrapment.•Housing: B lack Nylon, UL94V -O•Mounting hole pattern on page 1-X6.
5670 Series T-1 3/4 Right Angle 2 High LED Assembly
1-141
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
585
563
608
650
3.0
3.0
3.03.0
60
60
6060
5
5
5
5
35
35
35
35
10
10
10
10
Y ellow/Y ellow
G reen/G reen
Amber/Amber
R ed/R ed
(V )Max.
(V )T yp.
C ontinuousF orwardC urrent Max.(mA)
R atedC urrent(mA)
R everseB reakdown
V oltage Min.(V ) (nm)Wavelength
P eakF orward V oltageE mittedC olor
P art Number
5670H1;1
5670H3;3
5670H5;5
5670H7;7 6.3
10.0
10.0
6.3
T ypicalIntens ity(mcd)
F eatures :•Dual block mounting allows 2 LE Ds in same
board area.•S ingle block mounting-height and spacing
alignment, saves assembly cost.•S uper B rite LE Ds , high light output,diffused lens .•Low current, only 2 mA needed.•B uilt-in res is tor chip operates off 5 volt supply
without external res is tor.•S tandoffs prevent flux entrapment.
Housing: B lack Nylon, UL94V -O
Alternate LE Ds are also available in this packageas a standard variation.
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
How to order a Multi Position Assembly
1. Determine the color combination you require:S=RedG=H.E.GreenY=YellowX=Space
2. Determine the number of positions you requireincluding any open spaces.(CML does not recommend assemblies of greater than ten positions.)
Example:
C M I - 0 5 - R X G G Y
Lens Type # of Positions LED Sequence
MAX..245
.255
MAX.Ø.185
P R OT R US IONLE NS
.215.100
T Y P ..020 S Q.
.120
MAX..276
.190±.015
R E F E R E NC EC AT HODE
T Y P ..250
T Y P ..100
MAX..330
S Q.T Y P ..020
T Y P .R E F E R E NC EC AT HODE
All dimensions in inches.
Printed Circuit Board assembly has been made faster and easier than ever before with StatusPak™ CircuitBoard Indicators. These unique right angle LED indicators allow you to mount from one to ten positions inone easy step. T-1 3/4 StatusPaks™ can be customized to exact specifications requirements. You choosethe number of LEDs, the color sequence and position of the LED. StatusPak™ is shipped to you in a onepiece complete unit ready for PC mounting. StatusPak™ may be customized for your exact LEDrequirements if desired.Mounting hole pattern on page 1-X3.
625
590
565
660
2.5
2.5
2.52.1
2.0
2.1
2.21.7
120
120
120
120
8.0
8.0
8.0
3.2
3.2
3.2
3.2
1.25
Orange
Y ellow
H.E . G reen
R ed
(V )Max.
(V )T yp.
(mcd)T yp.
(mcd)Min.
(degrees)Angle
V iewing
(nm)Wavelength
P eakF orward V oltageLuminous Intens ityE mittedC olor
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
583
565
602
635
3.0
3.0
3.03.0
2.0
2.1
2.21.9
5
5
5
5
25
25
25
25
Y ellow
G reen
Amber
R ed
(V )Max.
(V )T yp.
C ontinuousF orwardC urrent Max.(mA)
R everseB reakdownV oltage Min.(V ) (nm)
WavelengthP eakF orward V oltage
E mittedC olor
P art Number
6321F 1
6321F 3
6321F 5
6321F 7
T ypicalIntens ity(mcd)
10
6.5
8.5
10 10
10
10
10
R atedC urrent(mA)
All dimensions in inches.
Features
•T-1 LED block mounting design assures height and side-by-side spacing alignment saves assembly costs.•Blocks have interlock feature which allows for multi LED arrays.•Black plastic mounting block provides high contrast ratio.•High Brite and Super Brite light output.•Standoffs prevent flux entrapment.•Meets UL 94V-O and Bellcore flammability specifications.
Available options:
•Low current, 5 Volt and 12 Volt built-in resistors.•Bicolor and blue LEDs also offered.Call factory for ordering information.
•High B rite and S uper B rite light output.•S tandoffs prevent flux entrapment.•Housing: B lack T hermoplastic•Meets UL94V -O and B ellcore flammability
specifications .•Mounting hole pattern on page 1-X6.Available options : Low current, 5 volt and 12 voltbuilt-in res is tors , bicolor and blue LE Ds alsooffered. C all factory for ordering information.
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
585
562
603
650
3.0
3.0
3.03.0
2.1
2.2
2.22.0
5
5
5
5
30
30
30
30
Y ellow
G reen
Amber
R ed
(V )Max.
(V )T yp.
C ontinuousF orwardC urrent Max.(mA)
R everseB reakdownV oltage Min.(V ) (nm)
WavelengthP eakF orward V oltage
E mittedC olor
P art Number
5655F 1
5655F 3
5655F 5
5655F 7
T ypicalIntens ity(mcd)
10
7
16
6.3 10
10
10
10
R atedC urrent(mA)
18.4/22.6
+/-.312.7
+1 -.518
P AR T T O T AP E
HOLE P IT C H
T AP E WIDT H
3
2
1
T OL.DIM.(mm)DE S C R IP T IONNUMB E R
All dimensions in inches .
Features
•Tape and reel for automatic assembly to PC boards-meets EIA STD RS-468.•T-1 size lamp-preassembled into plastic block, height and spacing alignment saves assembly time/cost.•High contrast ratio.•Standoffs prevent flux entrapments.•Standard reel quantity 750 pcs.
Housing: Black plastic, meets UL 94V-O
Note: Alternate LEDs are also available in this package as a standard variation.
Ø 13" R E F .
S E E # 2
S E E # 3
S E E # 1
.5501.500
S E E # 4
4 C E N. T O C E N. P OS IT ION 6.3 +/-1.3
ANODE(+).180
R E F ..100
R E F ..200
.290
.700 R E F .
.115±.015
.190
.160
T Y P ..018 S Q.
(+)ANODE
R E E L
D E S C R I P T I O N A N D F E A T U R E S
5680F Series T-1 2 High Right Angle Assembly
1-158
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
585
562
603
650
3.0
3.0
3.03.0
2.1
2.2
2.02.0
5.0
5.0
5.0
5.0
30
30
30
30
10
10
10
10
Y ellow/Y ellow
G reen/G reen
Amber/Amber
R ed/R ed
(V )Max.
(V )T yp.
C ontinuousF orwardC urrent Max.(mA)
R atedC urrent(mA)
R everseB reakdown
V oltage Min.(V ) (nm)Wavelength
P eakF orward V oltageE mittedC olor
P art Number
5680F 1;1
5680F 3;3
5680F 5;5
5680F 7;7 6.3
16
7
10.0
T ypicalIntens ity(mcd)
Model No. is as follows: 5680F ;
T he model numbers lis ted above are standard off the shelf parts , for the user who may have a requirement calling forvarious color/electrical specifications , a part number can be determined by referring to the chart shown below.
LE D 1 LE D 2
F eatures :•2 T -1 LE Ds mounted in s ingle block.•Less P C board space needed, height and
spacing alignment saves assembly cost.•High B rite and S uper B rite LE Ds , diffused lens .•S tandoffs prevent flux entrapment.•B lack Nylon plastic block, UL94V -O
Alternate LE Ds are also available in this packageas a standard variation.
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
585
562
603
650
3.0
3.0
3.03.0
2.1
2.2
2.22.0
5.0
5.0
5.0
5.0
30
30
30
30
10
10
10
10
Y ellow
G reen
Amber
R ed
(V )Max.
(V )T yp.
C ontinuousF orwardC urrent Max.(mA)
R atedC urrent(mA)
R everseB reakdown
V oltage Min.(V ) (nm)Wavelength
P eakF orward V oltageE mittedC olor
P art Number
5681G 1
5681G 3
5681G 5
5681G 7 6.3
16
7
10.0
T ypicalIntens ity(mcd)
7
Y ellow
5
G reen
1
R ed
LE D 3
Amber
Model No. is as follows: 5681G ; ; ;
Ordering Information: Use chart below to determine model number.
T op B ottomP os . 1
T op B ottomP os . 2
F eatures :•T -1 LE Ds stack mounted in s ingle block saves space and assembly time.•High B rite and S uper B rite light output.•S tandoffs prevent flux entrapment.•B lack plastic mounting block for high contrast ratio.•Meets UL94V -O and B ellcore flammability specifications .•G angable in 2 thru 8 positions .
Available options : Low current, 5 volt and 12 volt built-in res is tors , bicolor and blue LE Ds also offered.C all factory for ordering information.
T op B ottomP os . 3
T op B ottomP os . 4
All dimensions in inches.
.085 .200 T Y P
.100±.020 .100±.020
.200±.020
.410±.015
.100±.030 T Y P
.428±.020
.100
.200
T Y P.175±.015
.020
ANODE (+) T Y P T Y P . ALL P OS IT IONSIDI# 4303F 1LE D T -1 S IZE
UL 94V -0F ILLE D V ALOXMAT E R IAL: 2% G LAS S
.018 T Y P
.152
D E S C R I P T I O N A N D F E A T U R E S
5682F Series Dual Mount T-1 LED Assembly
1-161
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
583
565
602
635
3.0
3.0
3.03.0
2.2
2.3
2.22.2
5.0
5.0
5.0
5.0
10.0
8.5
6.5
10.0
Y ellow
G reen
Amber
R ed
(V )Max.
(V )T yp.
T yp.Intens ity(mcd)
R everseB reakdown
V oltage Min.(V ) (nm)Wavelength
P eakF orward V oltageE mittedC olor
P art Number
5682F 1
5682F 3
5682F 5
5682F 7 10
10
10
10
R atedC urrent(mA)
7
Y ellow
5
G reen
1
R ed
LE D 3
Amber
Model No. is as follows: 5682F ;
E xample: T o order red LE D on top and green LE D on bottom, the part number would be 5682F 1;5.
Ordering Information: Use chart below to determine model number.
C ontinuousF orwardC urrent Max.(mA)
20
25
2525
All dimensions in mm.
6.10
4.064.83
2.30
6.808.90
1.50
3.30
3.80±0.50
14.70
ANODE +
C OLOR G R E E N4303F 25LE D
C OLOR G R E E N4303F 25LE D
P OLY E S T E R UL94V -0MAT 'L: B LAC K T HE R MOP LAS T ICHOLDE R
T op LE D B ottom LE D
F eatures :• 2 T -1 LE Ds mounted in s ingle block
saves space and assembly time.• High density only 0.13 wide.• B lack plastic mounting block for high
contrast ratio.• Meets UL 94V -O and B ellcore
flammability specifications .
Available options :• Low current, 5V and 12V built-in
res is tors .• B i-color and blue LE Ds also offered.• C all factory for ordering information.
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
585
562
603
650
3.0
3.0
3.03.0
2.1
2.2
2.22.0
5.0
5.0
5.0
5.0
30
30
30
30
6.3
16.0
7.0
10.0
Y ellow
G reen
Amber
R ed
(V )Max.
(V )T yp.
C ontinuousF orwardC urrent Max.(mA)
T yp.Intens ity(mcd)
R everseB reakdown
V oltage Min.(V ) (nm)Wavelength
P eakF orward V oltageE mittedC olor
P art Number
5693F 1
5693F 3
5693F 5
5693F 7 10
10
10
10
R atedC urrent(mA)
7
Y ellow
5
G reen
1
R ed
LE D 3
Amber
Model No. is as follows: 5693F ; ;
E xample: P os ition 1 is red, pos ition 2 is yellow, pos ition 3 is green. T he part number is 5693F 1;7;5.
Ordering Information: Use chart below to determine model number.
P os . 1 P os . 2
F eatures :• 3 T -1 LE Ds stack mounted in s ingle block saves
space and assembly time.• High B rite and S uper B rite light output.• S tandoffs prevent flux entrapment.• B lack plastic mounting block for high contrast ratio.• Meets UL 94V -O and B ellcore flammability
specifications .
Available options :• Low current, 5V and 12V built-in res is tors .• B i-color and blue LE Ds also offered.• C all factory for ordering information.
•Mounting hole pattern on page 1-X3.
P os . 3
.190
.100
.300
.500
.140±.025
.145±.015
.110
.075 T Y P .
T Y P ..10.020 S Q. T Y P .
P OS . 1
P OS . 2
P OS . 3
S E E T AB LELE D
P OLY E S T E R UL 94-V OMAT 'L: B LAC K T HE R MOP LAS T ICHOUS ING :
5693S Series T-1 3 High Right Angle Shrouded LED Assembly
1-167
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
585
562
603
650
3.0
3.0
3.03.0
2.2
2.3
2.22.2
5.0
5.0
5.0
5.0
30
30
30
30
6.3
16.0
7.0
10.0
Y ellow
G reen
Amber
R ed
(V )Max.
(V )T yp.
C ontinuousF orwardC urrent Max.(mA)
T yp.Intens ity(mcd)
R everseB reakdown
V oltage Min.(V ) (nm)Wavelength
P eakF orward V oltageE mittedC olor
P art Number
5693S 1
5693S 3
5693S 5
5693S 7 10
10
10
10
R atedC urrent(mA)
7
Y ellow
5
G reen
1
R ed
LE D 3
Amber
Model No. is as follows: 5693S ; ;
E xample: P os ition 1 is red, pos ition 2 is yellow, pos ition 3 is green. T he part number is 5693S 1;7;5.
Ordering Information: Use chart below to determine model number.
All dimensions in mm.
P os . 1 P os . 2
F eatures :• 3 T -1 LE Ds mounted in s ingle block saves space and assembly time.• High B rite and S uper B rite light output.• S tandoffs prevent flux entrapment.• B lack plastic mounting block for high contrast ratio.• Meets UL 94V -O and B ellcore flammability specifications .
Available options :• Low current, 5V and 12V built-in res is tors .• B i-color and blue LE Ds also offered.• C all factory for ordering information.•Mounting hole pattern on page 1-X3.
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
625
565
590
625
2.5
2.5
2.52.5
2.0
2.2
2.12.0
30
30
30
30
25.0
60.0
60.0
60.0
8.0
24.0
24.0
24.0
H.E .R ed
H.E .G reen
Y ellow
H.E .R ed
(V )Max.
(V )T yp.
(mcd)T yp.
(mcd)Min.
(degrees)Angle
V iewing
(nm)Wavelength
P eakF orward V oltageLuminous Intens ityE mittedC olor
P art Number
C MC 01R
C MC 01Y
C MC 01G
C MC 01S
C olorLens
C lear
C lear
C lear
R ed Non-Diffused
Non-Diffused
Non-Diffused
Non-Diffused
P ackageT ype
590
625
565
590
2.5
2.5
2.52.5
2.1
2.0
2.22.1
120
130
30
30
12.5
20.0
25.0
25.0
3.2
3.2
8.0
8.0
Y ellow
H.E .R ed
H.E .G reen
Y ellowC MC 01Z
C MC 01H
C MW01R
C MW01Y
Y ellow
G reen
R ed
Y ellow Diffused
Diffused
Non-Diffused
Non-Diffused
565
590
625
565
2.5
2.5
2.52.5
2.2
2.1
2.02.2
120
120
120
120
2.0
2.0
2.0
12.5
1.0
1.0
1.0
3.2
H.E .G reen
Y ellow
H.E .R ed
H.E .G reenC MW01G
C MW01S
C MW01Z
C MW01H
G reen
R ed
Y ellow
G reen Diffused
Diffused
Diffused
Diffused
P rinted C ircuit B oard assembly has been made faster and eas ier than ever before. Now you can mount from one to ten circuitboard indicators , as a s ingle unit, in one easy step.T -1 S tatusP ak™ is customized to your specification. Y ou choose the number of LE Ds , color sequence and position.S tatusP ak™ is shipped to you as a complete unit, ready for one-step P C board mounting. Unique snap-together featureallows you to add or take away S tatusP ak™ modules as needed without any special tooling. S tatusP ak™ T -1 LE Ds are offeredin 12 standard types . Nearly 50 more T -1 LE D types are available on special order. S tandard transparent T -1 LE Ds withbrightness intens ities of up to 60mcd are offered for direct view and backlighting applications . S tandard diffused T -1 LE Dsare offered for status mode applications that require high brightness and wide angle viewing.
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
Features
•Stackable 1 to 14 positions.•Designed to align with right angle DIP switches.•Indicates status on/off, offered in red, green or yellow.•100° viewing angle, diffused epoxy.•Standoffs prevent flux entrapment.•High contrast black housing meets UL94V-O and Bellcore flammability ratings.
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
585
562
650
3.0
3.03.0
2.2
2.32.2
5
5
5
30
30
30
Y ellow
G reen
R ed
(V )Max.
(V )T yp.
C ontinuousF orwardC urrent Max.(mA)
R everseB reakdownV oltage Min.(V ) (nm)
WavelengthP eakF orward V oltage
E mittedC olor
P art Number
5894S 1;1;1;1
5894S 5;5;5;5
5894S 7;7;7;7
T ypicalIntens ity(mcd)
10
16
6.3 10
10
10
R atedC urrent(mA)
All dimensions in inches.
-
-
-
P eak F orwardC urrent @1ms-300 P P S(A)
Features
•4 LEDs stack mounted in single block savesspace and assembly time.
•Super Brite light output•Standoffs prevent flux entrapment.•Black plastic mounting block for high
contrast ratio.•Meets UL 94V-0 and Bellcore flammability
specifications.•Assembly can also be supplied in various
color combinations. Call factory for details.
.100
.020
.638
.285
.100 T Y P .T Y P .
.016 S Q.
.115±.015
.472
.020
.079
.100
.100 T Y P .
MAX..200
P OS .4
P OS .3
P OS .2
P OS .1
G R E E N C AT HODE F OR B I-C OLORC AT HODE T Y P .S ING LE C OLOR
D E S C R I P T I O N A N D F E A T U R E S
5994S Series Panel Mounted LED Indicator Light
1-178
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
585
562
650
3.0
3.03.0
2.2
2.32.2
5
5
5
30
30
30
Y ellow
G reen
R ed
(V )Max.
(V )T yp.
C ontinuousF orwardC urrent Max.(mA)
R everseB reakdownV oltage Min.(V ) (nm)
WavelengthP eakF orward V oltage
E mittedC olor
P art Number
5994S 1;1;1;1
5994S 5;5;5;5
5994S 7;7;7;7
T ypicalIntens ity(mcd)
10
16
6.3 10
10
10
R atedC urrent(mA)
All dimensions in inches.
-
-
-
P eak F orwardC urrent @1ms-300 P P S(A)
Features
•4 LEDs stack mounted in single block savesspace and assembly time.
•Super Brite light output•Standoffs prevent flux entrapment.•Black plastic mounting block for high
contrast ratio.•Meets UL 94V-0 and Bellcore flammability
specifications.•Assembly can also be supplied in various
color combinations. Call factory for details.
.100
.020
.638
.285
.100 T Y P .T Y P .
.016 S Q.
.115±.015
.472
.020
.079
.100
.100 T Y P .
MAX..200
P OS .4
P OS .3
P OS .2
P OS .1
G R E E N C AT HODE F OR B I-C OLORC AT HODE T Y P .S ING LE C OLOR
D E S C R I P T I O N A N D F E A T U R E S
6310 Series 2 x 5 Rectangular Right Angle LED Assembly
1-184
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
585
565
635
3.0
3.03.0
2.1
2.22.0
5
5
5
25
30
35
Y ellow
G reen
R ed
(V )Max.
(V )T yp.
C ontinuousF orwardC urrent Max.(mA)
R everseB reakdownV oltage Min.(V ) (nm)
WavelengthP eakF orward V oltage
E mittedC olor
P art Number
6310D1
6310D5
6310D7
T ypicalIntens ity(mcd)
4
4
4 20
20
20
R atedC urrent(mA)
Features
•Block mounting design assures height and side-by-side spacing-alignmentsaves assembly costs.
•Flat rectangular LED face has even light distribution.•Press-in mounting pin secures assembly to PC board while being soldered.•Standoffs prevent flux entrapment.
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S A N D R A T I N G S
565
590
625
20
2020
2.2
2.12.0
110
110
110
8.0
8.0
12.5
1.3
1.3
3.2
H.E . G reen
Y ellow
H.E . R ed
(ma)Max.
(ma)T yp.
(mcd)T yp.
(mcd)Min.
(degrees)Angle
V iewing
(nm)Wavelength
P eakF orward V oltageLuminous Intens ityE mittedC olor
P art Number
C M*01R
C M*01Y
C M*01G
C olorLens
R ed
Y ellow
G reen Diffused
Diffused
Diffused
P ackageT ype
The Chicago Miniature Lamp Rectangular StatusPak™ allows you to mount one to ten LEDs vertically orhorizontally in one easy step. Their black housing color provides for a high contrast background while theirunitized design is very resistant to vibration. Configurations are available to fit every application requiringeither right angle or upright PC board positioning. As with all Chicago Miniature Lamp StatusPak designs, theRectangular StatusPak provides the user with the lowest installed cost of any competitive product.Additional colors and intensities are available on special order.
*Replace with configuration letter: R=Horizontal LED, Right Angle MountS=Upright MountV=Vertical LED, Right Angle Mount
How to order a Multi Position Assembly
1. Determine the configuration design you require:R=Horizontal LED at Right Angle to board.V=Vertical LED at Right Angle to board.
SR=Horizontal LED Upright on board.
SV=Vertical LED Upright on board.2. Determine the number of positions you require
including any open spaces.3. Determine the color and position of each LED
you require:
R=Hi-Brite RedY=Hi-Brite YellowG=Hi-Brite GreenX=Open Space
Example: C M R - 0 5 - R R Y X G
C M S R - 0 5 - R R Y X G
Configuration # of Positions LED Sequence
Configuration # of Positions LED Sequence
1-186
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
P OS IT ION 1
T Y P ..285
.195
.390
.145±.015 .390.312
.135 MIN
.340 .100
C AT HODE
.020 S Q.T Y P ..094±.008
.280±.008
.156
CMV Series
CMR Series
CMS Series
All dimensions in inches. - Mounting hole patterns on page 1-X3.
.312
.340
C AT HODE.100
.156
.135±.015
.020 S Q. T Y P .
.094±.008
.390
.145±.015.280±.008
.195
.390
Single Position Multi Position
Single Position Multi Position
Single Position CMSR Multi Position
CMSV Multi Position
P OS IT ION 1
T Y P ..100
T Y P ..360
.390
.156
.312
.285
.145±.025
.390
.200±.015
.135 MIN. C AT HODE
T Y P ..020 S Q.
.195
T Y P ..200
T Y P ..360P OS IT ION 1
(NO LE Ds)E MP T Y S P AC E OP T IONAL
T Y P .C AT HODE
T Y P ..020 S Q.
P OS IT ION 1 (NO LE Ds)E MP T Y S P AC E S OP T IONAL
SMD27 T-1 1/4 Right Angle SMT Incandescent Lamp with Filter Boot
2-12
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R I C A L C H A R A C T E R I S T I C S
C -2V
C -2V
10,000
10,000
0.20
0.40
0.100
0.100
14.0
14.0
S MD-27-9
S MD-27-8
Number
P artV oltage
Des ignA mps MS C P *
Hours
L ifeT ype
F ilament
S MD-27-1
S MD-27-2
S MD-27-3
S MD-27-4
S MD-27-5
S MD-27-6
S MD-27-7 14.0
14.0
14.0
6.3
5.0
5.0
5.0
0.080
0.050
0.040
0.200
0.115
0.080
0.060
0.30
0.05
0.10
0.40
0.15
0.10
0.05
15,000
10,000
5,000
40,000
30,000
25,000
40,000
C -2V
C -2V
C -2V
C -2V
C -2V
C -6
C -2R
* MS C P value is without filter boot.F ilter boots are formulated to meet specific color requirements .P lease contact the factory for availability regarding your color needs .
D E S C R I P T I O N A N D F E A T U R E S
All dimensions in inches .S oldering pad geometryon page 2-S P 3.
SMD32 T-1 1/4 Right Angle SMT Incandescent Lamp with Filter Boot
2-14
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R I C A L C H A R A C T E R I S T I C S
C -2V
C -2V
10,000
10,000
0.50
0.40
0.100
0.100
14.0
14.0
S MD-32-9
S MD-32-8
Number
P artV oltage
Des ignA mps MS C P *
Hours
L ifeT ype
F ilament
S MD-32-1
S MD-32-2
S MD-32-3
S MD-32-4
S MD-32-5
S MD-32-6
S MD-32-7 14.0
14.0
14.0
6.3
5.0
5.0
5.0
0.080
0.050
0.040
0.200
0.115
0.080
0.060
0.30
0.05
0.10
0.40
0.15
0.10
0.05
15,000
10,000
5,000
40,000
30,000
25,000
40,000
C -2V
C -2V
C -2V
C -2V
C -2V
C -6
C -2R
* MS C P value is without filter boot.F ilter boots are formulated to meet specific color requirements .P lease contact the factory for availability regarding your color needs .
D E S C R I P T I O N A N D F E A T U R E S
P R OG R E S S IV E DIR E C T ION
All dimensions in inches .S oldering pad geometry on page 2-S P 3.
SMD50A T-1 1/4 Vertical SMT Incandescent Lamp with Filter Boot
2-17
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R I C A L C H A R A C T E R I S T I C S
C -2V
C -2V
10,000
10,000
0.50
0.40
0.100
0.100
14.0
14.0
S MD-50A -9
S MD-50A -8
Number
P artV oltage
Des ignA mps MS C P *
Hours
L ifeT ype
F ilament
S MD-50A -1
S MD-50A -2
S MD-50A
S MD-50A -4
S MD-50A -5
S MD-50A -6
S MD-50A -7 14.0
14.0
14.0
6.3
5.0
5.0
5.0
0.080
0.050
0.040
0.200
0.115
0.080
0.060
0.30
0.05
0.10
0.40
0.15
0.10
0.05
15,000
10,000
5,000
40,000
30,000
25,000
40,000
C -2V
C -2V
C -2V
C -2V
C -2V
C -6
C -2R
* MS C P value is without filter boot.F ilter boots are formulated to meet specific color requirements .P lease contact the factory for availability regarding your color needs .
D E S C R I P T I O N A N D F E A T U R E S
P R OG R E S S IV E DIR E C T ION
All dimensions in inches .S oldering pad geometryon page 2-S P 3.
SMD26 T-1 Short Right Angle SMT Incandescent Lamp with Filter Boot
2-11
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R I C A L C H A R A C T E R I S T I C S
C -2V
C -2V
10,000
16,000
0.16
0.15
0.065
0.040
14.0
14.0
S MD-26-9
S MD-26-8
Number
P artV oltage
Des ignA mps MS C P *
Hours
L ifeT ype
F ilament
S MD-26-1
S MD-26-2
S MD-26-3
S MD-26-4
S MD-26-5
S MD-26-6
S MD-26-7 14.0
14.0
14.0
6.3
5.0
5.0
5.0
0.040
0.040
0.033
0.100
0.115
0.075
0.060
0.12
0.09
0.05
0.20
0.15
0.09
0.05
16,000
16,000
10,000
5,000
30,000
25,000
40,000
C -2V
C -2V
C -2V
C -2R
C -2R
C -2R
C -2R
* MS C P value is without filter boot.F ilter boots are formulated to meet specific color requirements .P lease contact the factory for availability regarding your color needs .
D E S C R I P T I O N A N D F E A T U R E S
Ø.059±.008
.157±.004
.008±.002
.472±.008
.217±.004
.185
.472±.004Ø.059±.008
P R OG R E S S IV E DIR E C T ION
All dimensions in inches .S oldering pad geometryon page 2-S P 3.
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R I C A L C H A R A C T E R I S T I C S
C -2V
C -2V
10,000
16,000
0.16
0.15
0.065
0.040
14.0
14.0
S MD-43-9
S MD-43-8
Number
P artV oltage
Des ignA mps MS C P *
Hours
L ifeT ype
F ilament
S MD-43-1
S MD-43-2
S MD-43-3
S MD-43-4
S MD-43-5
S MD-43-6
S MD-43-7 14.0
14.0
14.0
6.3
5.0
5.0
5.0
0.040
0.040
0.033
0.100
0.115
0.075
0.060
0.12
0.09
0.05
0.20
0.15
0.09
0.05
16,000
16,000
10,000
5,000
30,000
25,000
40,000
C -2V
C -2V
C -2V
C -2R
C -2R
C -2R
C -2R
* MS C P value is without filter boot.F ilter boots are formulated to meet specific color requirements .P lease contact the factory for availability regarding your color needs .
D E S C R I P T I O N A N D F E A T U R E S
P R OG R E S S IV E DIR E C T ION
All dimensions in inches .S oldering pad geometryon page 2-S P 3.
SMD44 T-1 Vertical SMT Incandescent Lamp with Filter Boot
2-15
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R I C A L C H A R A C T E R I S T I C S
C -2V
C -2V
10,000
16,000
0.16
0.15
0.065
0.040
14.0
14.0
S MD-44-9
S MD-44-8
Number
P artV oltage
Des ignA mps MS C P *
Hours
L ifeT ype
F ilament
S MD-44-1
S MD-44-2
S MD-44-3
S MD-44-4
S MD-44-5
S MD-44-6
S MD-44-7 14.0
14.0
14.0
6.3
5.0
5.0
5.0
0.040
0.040
0.033
0.100
0.115
0.075
0.060
0.12
0.09
0.05
0.20
0.15
0.09
0.05
16,000
16,000
10,000
5,000
30,000
25,000
40,000
C -2V
C -2V
C -2V
C -2R
C -2R
C -2R
C -2R
* MS C P value is without filter boot.F ilter boots are formulated to meet specific color requirements .P lease contact the factory for availability regarding your color needs .
D E S C R I P T I O N A N D F E A T U R E S
P R OG R E S S IV E DIR E C T ION
All dimensions in inches .S oldering pad geometryon page 2-S P 3.
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
D E S C R I P T I O N A N D F E A T U R E S
E L E C T R I C A L C H A R A C T E R I S T I C S
Part No. Volts Watts Beam Angle(Foot Candles)
Luminous IntensityLife Hours
CM8-A281 6.0 5.00 30° Spot 150 50
ESX/FG 12.0 20.0 12° N Spot 4000 4000
BAB/FG 1.0 20.0 38° Flood 790 4000
FMT/FG 12.0 35.0 12° N Spot 700 4000
FMW/FG
EXT/FG 12.0
12.0
50.0
35.0
12° N Spot
38° Flood
11000
1450
4000
4000
ENL/FG
EXN/FG
FNV/FG 12.0
12.0
12.0 50.0
50.0
50.0 60° W Flood
38° Flood
28° Spot 3600
2250
950 4000
4000
4000
EXZ/FG 12.0 50.0 24° Spot 4200 4000
Standard clear
unpatterned
glass coverAll dimensions in inches.
1.85
.250
Ø.060
.210
Ø2.00
Axial Filament Halogen Lamp
3-3
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
D E S C R I P T I O N A N D F E A T U R E S
Part No. Volts Watts Filament
ShapeNominal MSCP Laboratory
Life Hours
CM1964 28.0 150 30° Spot 230 1000
CM1967 28.0 150 12° N Spot 210 1000
CM1970* 28.0 100 38° Flood 150 1000
CM1970X 28.0 100 12° N Spot 140 1000
CM1978X*
CM8-A103 28.0
10.0
50
100
12° N Spot
38° Flood
60
130
1000
2000
Configuration
A
A
A
A
C
B
Materials:
Globe: Quartz Glass
Base: Nickel Plated Brass
Atmosphere: Halogen Gas
* Lamp has a supported filament.
All dimensions in inches.
1.980 MAX.
1.135 MAX..422 T Y P .
.535 MAX..435 MAX.
1.75-1.87
.394 T Y P .
.500 MAX.Ø.396-.415
1.063 NOM.
MAX.1.125
1.880±.050
.440 MAX. .535 MAX.
.210 MAX..375 T Y P .
2.250 MAX.
Description:
These Axial Filament Halogen Lamps were primarily designed for aircraft navigation lights although their unique configurations,
rugged construction and exceptionally high light output make them the ideal light source for many applications.
A B C
Caution:
These halogen cycle lamps may shatter if scratched or damaged. Use these lamps in fixtures designed for
their high operating temperature. Always turn power off when changing these lamps. For satisfactory
performance limit the seal and wire lead temperature to 350°C to avoid deterioration. Maintain a minimum
lamp wall temperature of 250°C to assure the halogen cycle occurs. Remove all grease and fingerprints
from these lamps before operation. Never exceed the design voltage of these lamps.
T-2 3/4 Miniature Bayonet Base Halogen Lamp
3-4
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
T-3 1/4 Wedge Base Halogen Lamp
T-3 Special Halogen Lamp
All dimensions in inches.
All dimensions in inches.
All dimensions in inches.
Caution:
These halogen cycle lamps may shatter if scratched or damaged. Use these lamps in fixtures designed for their high operating temperature. Always turn power off when changingthese lamps. For satisfactory performance limit the seal and wire lead temperature to 350°C to avoid deterioration. Maintain a minimum lamp wall temperature of 250°C to assurethe halogen cycle occurs. Remove all grease and fingerprints from these lamps before operation. Never exceed the design voltage of these lamps.
1.30 MAX.
.201
.590
MAX..346
MAX..361
LC L
(C LE AR )S HR INK T UB ING
1.00
.660.375
.395
.335
.595
2.00
R E F .1.560
R E F .Ø.390
LC L
MAX..240
1.00 MAX.
.181 MAX.
MAX..374
MAX..425
Part Number:
Design Voltage:
Design Wattage:
Nominal MSCP:
Filament Shape:
Laboratory Life:
Materials:
CM2059�
�
12.0�
�
10.0�
�
10.0�
�
C-8I�
�
1000 Hours
Globe: Glass
Base: Nickel Plated Brass
Part Number:
Design Voltage:
Design Wattage:
Nominal MSCP:
Filament Shape:
Laboratory Life:
Materials:
CM250021�
�
14.0
50.0
95.0�
�
CC-6�
�
150 Hours
Globe: Quartz Glass
Base: Ceramic
Leads: 18 AWG High Temperature
Part Number:
Design Voltage:
Design Wattage:
Nominal MSCP:
Filament Shape:
Laboratory Life:
Materials:
CM1999�
�
28.0
25.0
40.0�
�
CC-6�
�
125 Hours
Globe: Glass
T-3 Double Slide Base Halogen Lamps
3-5
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
C O N F I G U R A T I O N
T-3 Single Contact Bayonet Base Halogen Lamps
C O N F I G U R A T I O N
Part No. Volts Watts Filament
ShapeNominal MSCP Laboratory
Life Hours
CM1968 28.0 25 C-2V 15 500
CM1975 12.8 25 C-6 25 500
CM1976 13.0 75 C-6 115 400
CM1977 8.5 62 C-6 110 50
Configuration
A
A
B
A
Comments
Quartz Glass
Quartz Glass
Quartz Glass
Quartz Glass
Part No. Volts Watts Filament
ShapeNominal MSCP Laboratory
Life Hours
CM1982 28.0 75 CC-8I 110 1000
CM1982SP 28.0 75 CC-6 107 2000
Configuration
A
B
Comments
Quartz Glass
Quartz Glass
Caution:
These halogen cycle lamps may shatter if scratched or damaged. Use these lamps in fixtures designed for their high operating temperature. Always turn power off when changingthese lamps. For satisfactory performance limit the seal and wire lead temperature to 350°C to avoid deterioration. Maintain a minimum lamp wall temperature of 250°C to assurethe halogen cycle occurs. Remove all grease and fingerprints from these lamps before operation. Never exceed the design voltage of these lamps.
All dimensions in inches.A B
All dimensions in inches.A B
MAX...438
MAX..603
LC L1.00MAX.
1.969
MAX..440
MAX.1.17
MAX..440
MAX.1.30
MAX...500
MAX..603
LC L1.06MAX.
1.87
T-3 Special Service Halogen Lamp
3-6
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
C O N F I G U R A T I O N
Part No. Design
Volts
Design
Watts
Filament
ShapeNominal MSCP Laboratory
Life Hours
CM1974 6.0 20 C-6 10 10000
CM1974D 6.0 20 C-6 10 10000
CM1962 8.5 62 C-6 110 50
CM1962B 8.5 62 C-6 110 50
Configuration
B
A
B
B
Comments
3" Bare Leads
3" Bare Leads
3" Bare Leads
9" Teflon Insulated
Caution:
These halogen cycle lamps may shatter if scratched or damaged. Use these lamps in fixtures designed for their high operating temperature. Always turn power off when changingthese lamps. For satisfactory performance limit the seal and wire lead temperature to 350°C to avoid deterioration. Maintain a minimum lamp wall temperature of 250°C to assurethe halogen cycle occurs. Remove all grease and fingerprints from these lamps before operation. Never exceed the design voltage of these lamps.
CM1962DZ 8.5 62 C-6 80 150
CM1962DX 8.5 62 C-6 80 150
CM1962TY 8.5 62 C-6 110 50
A
A
B
12" Teflon Insulated
4" Bare Leads
4" Teflon Insulated
Description:
These industry standard Halogen Lamps are used in a variety of applications from Aircraft Navigation lights to Medical work lights.
The unique compact design, rugged construction and exceptionally high light output make these lamps the ideal light source for
many applications.
Materials:
Globe:
Base:
Lead Connections:
Lead Wires:
Atmosphere:
Quartz Glass
Brass Special Bayonet
Brazed
18 AWG Bare or Teflon Insulated
Gas
All dimensions in inches.A B
LC L..285
.901
.247
.497
LC L.285
S E C T IONS E E C OMME NT S
.250
MAX..500
.497
MAX..836
S E C T IONS E E C OMME NT S
MAX..500
Marine Halogen Lamp
3-7
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
D E S C R I P T I O N A N D F E A T U R E S
S P E C I F I C A T I O N S
Part Number:
Design Voltage:
Design Current:
Maximum Wattage:
Luminous Intensity:
Average Life:
Base Material:
Glass:
Approvals:
CM449X12V
12.0 Volts
9.17 Amps
117 Watts
207 MSCP (2600 Lumens)
600 Hours
Nickel Plated Brass
Quartz
United States Coast Guard per: G-EOE-449
This unique high intensity halogen lamp in a prefocus base was
purpose designed for the marine industry. Originally designed for
use in the United States Coast Guard beacons, this lamp provides
exceptional long range visibility over a complete 360° beam pattern.
This lamp is United States Coast Guard approved conforming
to the Ocean Engineering Division's specification G-EOE-449.
This lamp design is also well suited to other marine and aircraft
applications requiring a high reliability, high intensity light source.
MAX.Ø.433
.437
2.16 MAX.
All dimensions in inches.
Search by Part Number:
Search for a Rep/Distributor
● Voltages from 1.5 - 120 V ● Rugged, vibration- & shock-resistant ● Easy installation and secure mounting ● Easy removal ● Tiny-Mite engineered for subminiature T-1 ¾
● UL ans CSA approved ● High reliability ● Lamps hard-wired into tamper-resistant housings ● Wire lead or quick connect terminal models ● Compact and economical ● Wide variety of colors, shapes, and finishes ● Special models
❍ Oil-tight to NEMA 12 ❍ Built-in flasher circuitry
LEDs
● Quick, snap-in panel mount ● Super-Brite, Ultra-Brite models ● Wide-angle visibility ● Many feature polycarbonate lenses for static discharge protection ● Many with built-in resistors ● Bi-color & tri-color available
CML Panel Mount Indicators Include:Click for more information
Mounting: Will snap-fit into Ø.155/.158 holein panels .031/.062 thick*
Terminals: .020 sq.
Housing: Black Nylon
*We recommend using an installation tool to pressagainst flange of housing rather than LED.
All dimensionsin inches.
Part
Number Color
Typ.
Intensity
(mcd)
Rated
Current
(mA)
Continuous
Forward
Current Max.
(mA)
Forward
Voltage Typ.
(V)
Forward
Voltage Max.
(V)
Peak Forward
Current @ 1ms-
300pps (A)
Reverse
Break-down
Voltage Min.
(V)
Peak
Wavelength
(nm)
5111F1
5111F3
5111F5
5111F7
5111F1LC
5111F5LC
5111F7LC
5111F1-5V
5111F3-5V
5111F5-5V
Red
Amber
Green
Yellow
Red
Green
Yellow
Red
Amber
Green
10
7
16
6.3
2.5
2.1
1.8
8.0
8.0
8.0
10
10
10
10
2
2
2
10
10
10
30
30
30
30
7
7
7
15
15
15
2.0
2.2
2.2
2.1
1.8
1.8
1.9
5
5
5
3.0
3.0
3.0
3.0
2.2
2.2
2.7
7.5
7.5
7.5
1.0
.09
.09
1.0
.007
.007
.007
-
-
-
5
5
4
5
5
5
5
5
5
5
650
603
562
585
635
565
583
635
583
565
.190 MAX..030
1.124
.320
.200 MIN.
.020 S Q.T Y P .
.100
LE ADSWR AP P AB LEWIR E
ANODE (+)
AS S HOWNT O P LUS S IG NF LAT OR IE NT E D
D E S C R I P T I O N A N D F E A T U R E S
5200F Series Panel Mounted LED Indicator Light
4-6
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
Features
•Quick push-in panel mounting.•Attractive appearance.•Wide angle visibility.•High-intensity light output (GaAsP on GaP for red and yellow,
GaP for green.)
These assemblies offer the superior performance of SUPER BRITELEDs in a package that is economical to buy and install.
Mounting: Will snap-fit into Ø.187/.192 holein panels .020/.097 thick
Lens: Polycarbonate
All dimensionsin inches.
Part
Number Color
Typ.
Intensity
(mcd)
Rated
Current
(mA)
Continuous
Forward
Current Max.
(mA)
Forward
Voltage Typ.
(V)
Forward
Voltage Max.
(V)
Peak Forward
Current @ 1ms-
300pps (A)
Reverse
Break-down
Voltage Min.
(V)
5200F1
5200F5
5200F7
Red
Green
Yellow
6
12
20
10
20
20
30
30
30
2.0
2.2
2.1
3.0
3.0
3.0
1.0
.09
1.0
5
5
5
Ø.210
.270
.190
.410 MIN.
- +
D E S C R I P T I O N A N D F E A T U R E S
5210F Series Panel Mounted LED Indicator Light
4-7
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
Features
This is an insulated lead version of the 5200F Series Sub-miniatureSuper Brite LED assembly that offers superior performance in apackage that is economical to buy and install. This series givesprotection against static discharge.
Mounting: Will snap-fit into Ø.187/.192 hole panels .020/.097 thick.
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
S P E C I F I C A T I O N S
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
Mounting Hole:
Mounting Centers:
Maximum Panel Thickness:
Bezel/Shank Material:
Hex Nut:
Wire Leads:
Ø.193 "D" hole
.334
.188
Chrome Plated Brass
Nickel Plated Brass
26 AWG Stranded, 105°C PVC Insulation, black to Anode, white to Cathode
660
640
585
570
2.4
2.8
2.82.8
1.7
2.0
2.02.1
25
25
25
25
100.0
25.0
25.0
19.5
60.0
16.0
16.0
11.5
R ed
R ed
Y ellow
G reen
(V )Max.
IMax.
(V )T yp.
(mcd)T yp.
(mcd)Min.
(degrees)Angle
V iewing
(nm)Wavelength
P eakF orward V oltageLuminous Intens ityE mittedC olor
P art Number
C MD95-21V G C /T R 7
C MD95-21V Y C /T R 7
C MD95-21V R C /T R 7
C MD95-21S R C /T R 7
C olorLens
C lear
C lear
C lear
C lear S ingle
S ingle
S ingle
S ingle
LensT ype V
640
585
57030 mA
35 mA
35 mA
35 mA
30 mA
30 mA
25 mA5.0
5.0
5.0
5.0
5.0
5.0
5.0
2.8
2.82.8
2.0
2.02.1
25
25
25
25.0
25.0
19.5
16.0
16.0
11.5
R ed
Y ellow
G reenC MD95-21V G C /T R 9
C MD95-21V Y C /T R 9
C MD95-21V R C /T R 9
C lear
C lear
C lear S ingle
S ingle
S ingle
RF
All dimensions in inches.
Ø.265
.550
.120 6.00
10-32 T HD
The Chicago Miniature Lamp Astrolite indicator lights provide versatile solid state indication in an aesthetically pleasing economical,compact, panel mountable package. Luminous intensities as high as 300 mcd are available. As special order, these indicator lightscan be provided with a voltage dropping resistor built into the lead for operation at higher voltages.
D E S C R I P T I O N A N D F E A T U R E S
3990A Series Panel Mounted LED Indicator
4-9
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
E L E C T R O - O P T I C A L C H A R A C T E R I S T I C S
Features
Mounting: Will snap-fit in Ø.217/.221 hole in panels .031/.062 thick.
Bezel: Polished stainless steel. For black finish add "X" after theseries letter(s).
Housing: White Nylon
* Also incorporates 1N4004(400 P.I.V.) rectifier diode.
Y ellow
G reen
R ed
Lens C olor
4304H7
4304H5
4304H1
Incorporates LE D*
To use 24V model: Beyond 32VAC add 30 ohmsper volt; beyond 24 VDC add 50 ohms per volt.Use 1/2W resistor up to 50V; 1W resistor for 50Vto 70V; 2W resistor for 75V to 125V. Do not usebeyond 125V.
All dimensionsin inches.
390
2191L7-12V2191L5-12V2191L1-12V
(12V )Model No.
150
2191L7-6V2191L5-6V2191L1-6V
(6V )Model No.
(ohms)Internal R es istorY ellowG reenR ed
Lens C olor
LE D S olid S tate Indicator
1000
2191L7-24V2191L5-24V2191L1-24V
(24V )Model No.
22 to 3210 to 205 to 11
V AC
24V12V6V
Nominal
V oltage T able
12 to 246 to 13.53.5 to 6.5
V DC
1.310
Ø.310 MAX.
.380
.090.340
D E S C R I P T I O N A N D F E A T U R E S
2191QL Series Non-Relampable LED Solid-State Indicator Lights
4-20
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Solid-state indicator lights complete with built-in current-limitingresistor and rectifier diode.
Mounting: Ø.310 MIN., supplied with push-on speednut SN1287.
Terminals: Quick-connect, tinned brass .187 x .020
Lens: Polycarbonate
Anode(+): Marked above terminal
Bezel: Polished stainless steel. For black finish add "X" after theseries letter(s).
Housing: White Nylon
* Also incorporates 1N4004(400 P.I.V.) rectifier diode.
Y ellow
G reen
R ed
Lens C olor
4304H7
4304H5
4304H1
Incorporates LE D*
To use 24V model: Beyond 32VAC add 30 ohmsper volt; beyond 24 VDC add 50 ohms per volt.Use 1/2W resistor up to 50V; 1W resistor for 50Vto 70V; 2W resistor for 75V to 125V. Do not usebeyond 125V.
All dimensionsin inches.
1000
2191QL7-24V2191QL5-24V2191QL1-24V
(24V )Model No.
390
2191QL7-12V2191QL5-12V2191QL1-12V
(12V )Model No.
(ohms)Internal R es istorY ellowG reenR ed
Lens C olor
LE D S olid S tate Indicator
22 to 3210 to 20
V AC
24V12V
Nominal
V oltage T able
12 to 246 to 13.5
V DC
1.310
.690
Ø.310 MAX.
.187 T E R MINALS
.380
.090.340
D E S C R I P T I O N A N D F E A T U R E S
2191QU Series Non-Relampable LED Solid-State Indicator Lights
4-22
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Solid-state indicator lights complete with built-in current-limitingresistor and rectifier diode.
Mounting: Ø.310 MIN., supplied with push-on speednut SN1287.
Terminals: Quick-connect, tinned brass .187 x .020
Lens: Polycarbonate
Anode(+): Marked above terminal
Bezel: Polished stainless steel. For black finish add "X" after theseries letter(s).
Housing: White Nylon
* Also incorporates 1N4004(400 P.I.V.) rectifier diode.
Y ellow
G reen
R ed
Lens C olor
4304H7
4304H5
4304H1
Incorporates LE D*
To use 24V model: Beyond 32VAC add 30 ohmsper volt; beyond 24 VDC add 50 ohms per volt.Use 1/2W resistor up to 50V; 1W resistor for 50Vto 70V; 2W resistor for 75V to 125V. Do not usebeyond 125V.
All dimensionsin inches.
1000
2191QU7-24V2191QU5-24V2191QU1-24V
(24V )Model No.
390
2191QU7-12V2191QU5-12V2191QU1-12V
(12V )Model No.
(ohms)Internal R es istorY ellowG reenR ed
Lens C olor
LE D S olid S tate Indicator
22 to 3210 to 20
V AC
24V12V
Nominal
V oltage T able
12 to 246 to 13.5
V DC
1.310
.690
Ø.310 MAX.
.187 T E R MINALS
.380
.090.280
D E S C R I P T I O N A N D F E A T U R E S
2191U Series Non-Relampable LED Solid-State Indicator Lights
4-21
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Solid-state indicator lights complete with built-in current-limitingresistor and rectifier diode.
Mounting: Ø.310 MIN., supplied with push-on speednut SN1287.
Bezel: Polished stainless steel. For black finish add "X" after theseries letter(s).
Housing: White Nylon
* Also incorporates 1N4004(400 P.I.V.) rectifier diode.
Y ellow
G reen
R ed
Lens C olor
4304H7
4304H5
4304H1
Incorporates LE D*
To use 24V model: Beyond 32VAC add 30 ohmsper volt; beyond 24 VDC add 50 ohms per volt.Use 1/2W resistor up to 50V; 1W resistor for 50Vto 70V; 2W resistor for 75V to 125V. Do not usebeyond 125V.
All dimensionsin inches.
390
2191U7-12V2191U5-12V2191U1-12V
(12V )Model No.
150
2191U7-6V2191U5-6V2191U1-6V
(6V )Model No.
(ohms)Internal R es istorY ellowG reenR ed
Lens C olor
LE D S olid S tate Indicator
1000
2191U7-24V2191U5-24V2191U1-24V
(24V )Model No.
22 to 3210 to 205 to 11
V AC
24V12V6V
Nominal
V oltage T able
12 to 246 to 13.53.5 to 6.5
V DC
1.310
Ø.310 MAX.
.380
.090.280
D E S C R I P T I O N A N D F E A T U R E S
2195QA Series Non-Relampable Incandescent Indicator Lights
4-13
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Mounting: Ø.310 MIN., supplied with push-on speednut SN1287.
Terminals: Quick-connect, tinned brass
Lens: Polycarbonate
Bezel: White nylon. For black finish add "X" after the series letter(s).
Bezel: Polished stainless steel. For black finishadd "X" after the series letter(s).
Housing: White Nylon
* Also incorporates 1N4004(400 P.I.V.) rectifier diode.
Y ellow
G reen
R ed
Lens C olor
4304H7
4304H5
4304H1
Incorporates LE D*
To use 24V model: Beyond 32VAC add 30 ohms per volt; beyond 24 VDC add 50 ohms per volt.Use 1/2W resistor up to 50V; 1W resistor for 50V to 70V; 2W resistor for 75V to 125V. Do not use beyond 125V.
Notes: Also incorporatesIN4004 (400 P.I.V.) rectifierdiode.*125 VAC supplied with6" white wire, stripped 1/2"with external 3.9K 1/2 wattresistor attached to one lead,covered with shrink tubinginsulation.
All dimensionsin inches.
390
1091M7-12V1091M5-12V1091M1-12V
(12V )Model No.
150
1091M7-6V1091M5-6V1091M1-6V
(6V )Model No.
(ohms)Internal R es istorY ellowG reenR ed
Lens C olor
LE D S olid S tate Indicator
1000
1091M7-24V1091M5-24V1091M1-24V
(24V )Model No.
(2) 3.9K 1/2W*(One Internal)
1091M7-125V AC1091M5-125V AC1091M1-125V AC(105-125 V AC *)
Model No.
22 to 3210 to 205 to 11
V AC
24V12V6V
Nominal
V oltage T able
12 to 24
105 to 125125 V AC -
6 to 13.53.5 to 6.5
V DC
1.130
.380
Ø.630
MAX.Ø.500
D E S C R I P T I O N A N D F E A T U R E S
1091QM Series Non-Relampable LED Indicator Lights
4-37
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Solid-state indicator lights complete with built-incurrent-limiting resistor and rectifier diode.
Mounting: Will snap-fit into Ø.500/.505 hole inpanels .020/.100 thick. Push-on speednut SN0461also available.Mounting hole pattern on page SP2.
Bezel: Polished stainless steel.For black finish add "X" after the series letter(s).
Housing: White Nylon
* Also incorporates 1N4004(400 P.I.V.) rectifier diode.
Y ellow
G reen
R ed
Lens C olor
4304H7
4304H5
4304H1
Incorporates LE D*
To use 24V model: Beyond 32VAC add 30 ohmsper volt; beyond 24 VDC add 50 ohms per volt.Use 1/2W resistor up to 50V; 1W resistor for 50Vto 70V; 2W resistor for 75V to 125V. Do not usebeyond 125V.
All dimensionsin inches.
390
1091QM7-12V1091QM5-12V1091QM1-12V
(12V )Model No.
(ohms)Internal R es istorY ellowG reenR ed
Lens C olor
S olid S tate
1000
1091QM7-24V1091QM5-24V1091QM1-24V
(24V )Model No.
22 to 3210 to 20
V AC
24V12V
Nominal
V oltage T able
12 to 246 to 13.5
V DC
1.070
T E R MINALS.187
.380
Ø.630
MAX.Ø.500
D E S C R I P T I O N A N D F E A T U R E S
2990P Series Non-Relampable Incandescent Indicator Lights
4-26
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
2802 Series Relampable Incandescent Indicator Light
4-61
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
D E S C R I P T I O N A N D F E A T U R E S
L E N S S P E C I F I C A T I O N S
Note: For 120 volt applications, CML recommends the use of a slide base neon lamp, rather than an incandescent lamp.
.630
.810
.530
.090 .840
.380±.020
T HIS MANNE R .
NUT IS US E D IN
P ANE L WHE N HE X
0-.250T HK .
AC R OS S F LAT S
.810
HE X NUT NY LON
T HR E AD
11/16-27
B LAC K P OLY E S T E R
B ODY
B R AS S .
T E R MINALS , NIC K LE P LAT E D
.187 QUIC K C ONNE C T
B E ZE L
DOME LE NS
F LAT LE NS
R E V E R S E D AS S HOWN
WHE N HE X. NUT IS
T HIC K P ANE L
.250-.340
All dimensions in inches .
Lens Part No:
25P-306*
25P-307**
25P-326*
25P-606*
Description
Transparent dome
Translucent dome
Transparent fluted dome
Transparent cylindrical
25P-607** Translucent cylindrical
25P-626* Transparent fluted cylindrical
All dimensions in inches .
(*) R=Red, A=Amber, G=Green, C=Clear
(**) R=Red, Y=Yellow, G=Green, W=White
Ordering Information:
For use with T-2 Slide Base (standard) lamps.
Complete assembly consists of socket (2802),
lamp, and lens (see chart below).
Items supplied unassembled.
Lamp, lens and socket must be ordered
separately.
Mounting: Supplied with polyester hex nut.
Lens: Polycarbonate-threaded
Body: Black polyester
Terminals: Nickel plated brass
Bezel: Black
Dome Fluted Dome Cylindrical Fluted Cylindrical
9/16-27 T HD.
.438 Ø.625 Ø.625.438
9/16-27 T HD.
Ø.625.375
9/16-27 T HD.
Ø.625
9/16-27 T HD.
.375
2803 Series Relampable Incandescent Indicator Light
4-62
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
D E S C R I P T I O N A N D F E A T U R E S
L E N S S P E C I F I C A T I O N S
Note: For 120 volt applications, CML recommends the use of a slide base neon lamp, rather than an incandescent lamp.
.630
.810
.530
.090 .840
.380±.020
T HIS MANNE R .
NUT IS US E D IN
P ANE L WHE N HE X
0-.250T HK .
AC R OS S F LAT S
.810
HE X NUT NY LON
T HR E AD
11/16-27
B LAC K P OLY E S T E R
B ODY
B R AS S .
T E R MINALS , NIC K LE P LAT E D
.187 QUIC K C ONNE C T
B E ZE L
DOME LE NS
F LAT LE NS
R E V E R S E D AS S HOWN
WHE N HE X. NUT IS
T HIC K P ANE L
.250-.340
All dimensions in inches .
Lens Part No:
25P-306*
25P-307**
25P-326*
25P-606*
Description
Transparent dome
Translucent dome
Transparent fluted dome
Transparent cylindrical
25P-607** Translucent cylindrical
25P-626* Transparent fluted cylindrical
All dimensions in inches .Ordering Information:
For use with T-2 Slide Base (standard) lamps.
Complete assembly consists of socket (2803),
lamp, and lens (see chart below).
Items supplied unassembled.
Lamp, lens and socket must be ordered
separately.
Mounting: Supplied with polyester hex nut.
Lens: Polycarbonate-threaded
Body: Black polyester
Terminals: Nickel plated brass
Bezel: Polished stainless steel
Dome Fluted Dome Cylindrical Fluted Cylindrical
9/16-27 T HD.
.438 Ø.625 Ø.625.438
9/16-27 T HD.
Ø.625.375
9/16-27 T HD.
Ø.625
9/16-27 T HD.
.375
(*) R=Red, A=Amber, G=Green, C=Clear
(**) R=Red, Y=Yellow, G=Green, W=White
D E S C R I P T I O N A N D F E A T U R E S
3001 and 3041 Series Relampable Round Socket
4-58
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
All dimensionsin inches.
For use with T-2 slide base lamps (short)
Mounting: Ø.500 hole, supplied with push-onspeednut SN0461.Mounting hole pattern on page SP2.
Terminals: Nickel plated brass
Lamp: T-1 3/4 Wedge base
Body: Black nylon
Note: Lamps must be ordered separately.
3041
3001
Model No.
.187 wide
.205 wide
T erminal S ize
Ø.590
UNDE R F LANG E
.465
.140
.860
1.140
Ø.500 MAX.
T HIC K
.016
D E S C R I P T I O N A N D F E A T U R E S
3040 and 3043 Series Relampable Incandescent Indicator Light
4-59
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Ordering Information:For use with T-2 slide base (short) lamps.Complete assembly consists of socket (3040 or 3043),lamp and lens (see chart below).Items supplied unassembled. Lamp lens and socketmust be ordered separately.
Mounting: Ø.500 hole, supplied with push-onspeednut SN0461Mounting hole pattern on page SP2.
Lens: Polycarbonate, snap-on
Body: Black Nylon
Terminals: Nickel plated brass
All dimensionsin inches.
311331123111
R ound Lens No.
AmberC learR edC olor
Lens C olor T able
31233114White 3124
31223121
311731163115
Y ellowB lueG reen
312731263125
S quare Lens No.
MAX.Ø.500
Ø.710
UNDE R F LANG E.465
.280
.770
.470
.710 S Q.
3043
3040
S ocket No.
.187 wide
.205 wide
T erminal S ize
D E S C R I P T I O N A N D F E A T U R E S
3062 Series Relampable Incandescent Indicator Light
4-60
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Ordering Information:For use with T-2 slide base (short) lamps.Complete assembly consists of socket (3062),lamp and lens (see chart below).Items supplied unassembled. Lamp lens and socketmust be ordered separately.
Mounting: Ø.500 hole, supplied with push-onspeednut SN0461Mounting hole pattern on page SP2.
Lens: Polycarbonate, snap-on
Body: Black Nylon
Terminals: Nickel plated brass
All dimensionsin inches.
311331123111
R ound Lens No.
AmberC learR edC olor
Lens C olor T able
31233114White 3124
31223121
311731163115
Y ellowB lueG reen
312731263125
S quare Lens No.
MAX.Ø.500
Ø.710
UNDE R F LANG E.465
.280
.770
.470
.710 S Q.
D E S C R I P T I O N A N D F E A T U R E S
4105 Series Relampable Socket
4-51
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
All dimensionsin inches.
Features
Mounting: Rear twist insertion in .060 thick plastic
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
Board Mounted Neon Lamp
•Easy to mount.
•Press-in mounting for accurate location on printed circuit board.
•Mounting pattern on page 1-X3.
•Includes board stand-off to prevent flux entrapment-permit easy washing.
Housing: Black Nylon
Lamp:
.250 MAX.
.130
.250 MAX.
F OR P OS T C LE ANING
.020 S T AND-OF F
.100*
.250*
.015
.150
.450 MAX.*
.300
MAX.
Ø.160
.130
.190±.060
Lamp
Model
5314N1
5314N2
Incorporates
Lamp No.
1MH�
2ML
See page 5-4
for complete lamp
specifications.
Lamp Leads(tinned)
All dimensions in inches.*Note: These dimensions are at the base of holder.
Neon Indicator Lamps
5-8
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
8585
90
V DC
6060
65
V ACB reakdown V oltage
Maximum
8.05.0
8.0
mAC urrentDes ign
NE -56NE -30
NE -32
NumberOld R ef.
J 5AJ 9A
L5A
NumberC onfigurationG -10 D.C . B ayonet B ase
S -11 Medium S crew B ase
P art
Footnotes1. Life value is to approximately 50% of initial
light output. Values shown apply to use onAC unless otherwise shown. Life on DC isapproximately 60% of AC values when DCcurrent is equal to RMS AC value. Whenequal DC and RMS AC voltages and equal
3. Tinned leads.4. High brightness.5. Formed tip.6. Dark effect reduced.7. Lamp drops through a Ø.310"
cylinder of .500" minimum length.
resistances are utilized, life will beapproximately the same.
2. For DC operation of high brightness lampsuse a minimum of 150 circuit volts.Maximum initial breakdown voltage 95 VAC,135 VDC in light.
11590
8065
18.018.0NE -34
AR -1W1A906530.0NE -40R 6A
R 2AS -14 Medium S crew B ase
906530.0NE -42R 9AS -14 D.C . B ayonet S kirted B ase
B
A
B
A
A
B
B
A
5-9
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
1,12
1,111,11
--
-
2.252.25
2.13
1.421.42
1.2910,000
S -11 Medium S crew B ase
8. Life values shown apply to use on AC
unless otherwise shown. End of life
occurs when breakdown voltage
increases to line voltage and lamp will
no longer start. With equal DC and
RMS AC current, life will be somewhat
11. Resistor included in Base.
12. Caution: Bulb may shatter and/or circuit
may be damaged without external series
resistance.
13. Green fluorescent.
14. Argon gas filled.
lower than the 60% value quoted for
standard brightness lamp.
9. Maximum breakdown voltage in total
darkness 100VAC.
10. Minimum current for stable operation
1.5mA.
1,11,141,11
S -14 Medium S crew B ase
1,12S -14 D.C . B ayonet S kirted B ase
W LifeUsefulAverage
A(Max.)inches
Dimensions
B (Max.) C (Min.)OhmsWG -10 D.C . B ayonet B aseOhms
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
B
A
9090
11590
9090
V DC
6565
8065
6565
V ACB reakdown V oltage
Maximum
2.02.0
2.02.0
2.02.0
mAC urrentDes ign
NE -21NE -47
NE -58AR -3
NE -57NE -45
NumberOld R ef.
B 8AB 6A
J 2AF 4A
F 3AB 7A
NumberC onfigurationT -4 1/2 C andelabra S crew B ase
T -4 1/2 S .C . B ayonet B ase
P art
Footnotes1. Life value is to approximately 50% of initial
light output. Values shown apply to use onAC unless otherwise shown. Life on DC isapproximately 60% of AC values when DCcurrent is equal to RMS AC value. Whenequal DC and RMS AC voltages and equal
3. Tinned leads.4. High brightness.5. Formed tip.6. Dark effect reduced.7. Lamp drops through a Ø.310"
cylinder of .500" minimum length.
A
B
resistances are utilized, life will beapproximately the same.
2. For DC operation of high brightness lampsuse a minimum of 150 circuit volts.Maximum initial breakdown voltage 95 VAC,135 VDC in light.
B
A
9090
6565
2.02.0NE -17
NE -48B 9AB 5A
T -4 1/2 D.C . B ayonet B aseA
B
90658.0NE -79R 1AS -7 D.C . B ayonet B ase
5-7
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
1,11,141,11
1,111,11
1,121,12
--
--
--
1.501.50
1.531.53
1.531.53
.588
.588
.588
.588
.588
.588
1505,000
7,5005,000
T -4 1/2 S .C . B ayonet B ase
8. Life values shown apply to use on AC
unless otherwise shown. End of life
occurs when breakdown voltage
increases to line voltage and lamp will
no longer start. With equal DC and
RMS AC current, life will be somewhat
11. Resistor included in Base.
12. Caution: Bulb may shatter and/or circuit
may be damaged without external series
resistance.
13. Green fluorescent.
14. Argon gas filled.
lower than the 60% value quoted for
standard brightness lamp.
9. Maximum breakdown voltage in total
darkness 100VAC.
10. Minimum current for stable operation
1.5mA.
1,121,12
T -4 1/2 D.C . B ayonet B ase
1,12S -7 D.C . B ayonet B ase
W LifeUsefulAverage
A(Max.)inches
Dimensions
B (Max.) C (Min.)OhmsWT -4 1/2 C andelabra S crew B aseOhms
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
135135
9090
V DC
9595
6565
V ACB reakdown V oltage
Maximum
1.21.2
0.30.3
mAC urrentDes ign
NumberOld R ef.
A1H-RA1H
A1G -RA1G
135135
135135
9595
9595
1.91.9
1.21.2
NE -84K 1A5-RK 1A5
K 1B 1-RK 1B 1
135135
9090
9595
6565
1.91.9
0.70.7
NE -2J
NE -2D
C 9A-RC 9A
135135
9595
1.21.2
G 9B -RG 9B
C 7A-RC 7A
NumberC onfigurationT -2 Midget F lange B ase
P art
3. Tinned leads.4. High brightness.5. Formed tip.6. Dark effect reduced.7. Lamp drops through a Ø.310"
cylinder of .500" minimum length.
resistances are utilized, life will beapproximately the same.
2. For DC operation of high brightness lampsuse a minimum of 150 circuit volts.Maximum initial breakdown voltage 95 VAC,135 VDC in light.
9090
6565
0.70.7
K 1C 5-RK 1C 5
T -2 T elephone S lide B ase
135135
135135
9595
9595
1.21.2
1.21.2
NE -51GAR -51G R
NE -51HRNE -51H
B 2G -RB 2G
B 2A-RB 2A
9090
6565
0.30.3NE -51
NE -51RB 1A-RB 1A
T -3 1/4 Miniature B ayonet B ase
A
B
C
B
A
A
B
Footnotes1. Life value is to approximately 50% of initial
light output. Values shown apply to use onAC unless otherwise shown. Life on DC isapproximately 60% of AC values when DCcurrent is equal to RMS AC value. Whenequal DC and RMS AC voltages and equal
Neon Indicator Lamps
5-11
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT
3. Tinned leads.4. High brightness.5. Formed tip.6. Dark effect reduced.7. Lamp drops through a Ø.310"
cylinder of .500" minimum length.
resistances are utilized, life will beapproximately the same.
2. For DC operation of high brightness lampsuse a minimum of 150 circuit volts.Maximum initial breakdown voltage 95 VAC,135 VDC in light.
T -2 Midget F lange B ase
T -2 T elephone S lide B ase
T -3 1/4 Miniature B ayonet B ase
Footnotes1. Life value is to approximately 50% of initial
light output. Values shown apply to use onAC unless otherwise shown. Life on DC isapproximately 60% of AC values when DCcurrent is equal to RMS AC value. Whenequal DC and RMS AC voltages and equal
NumberC onfigurationWire T erminal-S tandard B rightness
Wire T erminal-High B rightness
P art
Footnotes
1. Life value is to approximately 50% of initiallight output. Values shown apply to use onAC unless otherwise shown. Life on DC isapproximately 60% of AC values when DCcurrent is equal to RMS AC value. Whenequal DC and RMS AC voltages and equalresistances are utilized, life will beapproximately the same.
2. For DC operation of high brightness lampsuse a minimum of 150 circuit volts.Maximum initial breakdown voltage 95 VAC,135 VDC in light.
3. Tinned leads.4. High brightness.5. Formed tip.6. Dark effect reduced.7. Lamp drops through a Ø.310" cylinder
of .500" minimum length.
5-5
Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product
147 Central AvenueHackensack, New Jersey 07601Tel: 201-489-8989 • Fax: 201-489-6911
CHICAGO MINIATURE LAMP, INC.WHERE INNOVATION COMES TO LIGHT