CMB-67F Installation Guide 1 CMB-67F Mini Barebone system Intel High Performance Platform User’s Manual Installation Guide Edition 1.0 2011/05/11
CMB-67F Installation Guide
1
CMB-67F
Mini Barebone system Intel High Performance Platform
User’s Manual Installation Guide
Edition 1.0 2011/05/11
CMB-67F Installation Guide
2
Document Content: Packing List Product Specification Hardware Installation
Packing List:
CMB-67F Chassis x 1 (Including LV-67F Motherboard)
DSPD-080-12A 80W AC-DC Adapter x 1 Power Cord x 1 CPU Cooler x 1
13-pin to 7-pin SATA Cable x1 SATA Cable 50 cm x1 Com cable 15cm W/O bracket x 1 ATX POWER output 20P to 4P*1 + SATA15P*1 26-pin DVI cable x1 (Only LV-67FXD) 10-pin CRT cable x1 (Only LV-67FXT) DC JACK CABLE 26cm x1 CD Driver x1 (Including User’s Manual) PCIE-2PR A1PCIE Slot x1 Hanging holders x2
CM
B-67F
CMB-67F Installation Guide
3
Hardware Installation:
Motherboard placement JRTC
JCSEL2
JCSEL1
CD_DIO
CD_IN
For the Components placement,it is available for CMB-67FD only
Jumper Connector
SO-DIMM1
PCIE x16
CN_LVDS
ATX
SATA1/2/3/4/5/6 CN_INV
CN_SMBUS
CPUFAN
JVLCD
DC_IN
JP2
SYSFAN
MINIPCI
CN_AUDIO
CN_COM2
JFRNT MINI_CARD
CN_DVI
(Only LV-67FXD)
JAT
JP1
CN_IR
CN_USB3/4
CMB-67F Installation Guide
4
SO-DIMM2
CMB-67F Installation Guide
5
I/O panel: Front:
CD-ROM
Reset Button HD LED
Power LED Power Button USBUSB
Mic / Ear-Phone
CMB-67F Installation Guide
6
Rear:
Power input : DSPD-080-12A 80W 12V AC-DC Adapter Input.
VGA2
SPDIF
USB
COM Port
VGA
DVI (Only LV-67FXD) DC-IN
Antenna Port
Mouse
Keyboard CS-Out / Line-In
RS-Out / Line-Out
SS-Out / Mic
LAN (Only LV-67FXT)
COM2
CMB-67F Installation Guide
7
Chassis Setup procedure: 1. Turn the chassis screws.
2. Turn the screws and refer the picture A and B and C.
(A)
(B)
CMB-67F Installation Guide
8
(C)
CMB-67F Installation Guide
9
3. Push the Chassis shield towards the back then open it.
2
1
CMB-67F Installation Guide
10
4. Turn the screws.
CMB-67F Installation Guide
11
5. Push the front panel towards the front then take the CD-ROM holder off.
CMB-67F Installation Guide
12
6. Turn the CPU cooler screws and then refer the motherboard manual
page.16 to install the CPU.
(After installing CPU, please turn the CPU FAN screws to tighten.)
CMB-67F Installation Guide
13
7. Open the Dimm holder then check the pin number to match the socket
side well before installing memory module.
CMB-67F Installation Guide
15
8. Press down the memory module then check dimm holder hook well.
CMB-67F Installation Guide
16
9. Turn the PCI port shield’s screw and take shield off refer picture A and F. (If you don’t install PCIE card, please direct to Step 10 .)
(A).
(B). You can install PCI Express Riser Card PCIE-2PR.
CMB-67F Installation Guide
17
(C). Please direct to install Riser-Card and Turn the chassis screws.
(D). Please direct to install PCIE Card
CMB-67F Installation Guide
18
(E).
(F).
CMB-67F Installation Guide
19
10. After install HD driver, Turn the CD-ROM holder and front panel screw
well refer picture.
CMB-67F Installation Guide
20
11. Check the CD-ROM driver SATA input direction.
12. Check the CD-ROM driver and SATA cable connects well.
CMB-67F Installation Guide
21
13. After install HD driver, Turn the CD-ROM holder and front panel screw
well. Refer picture A and B.
(A).
(B).
CMB-67F Installation Guide
22
14. Turn the CD-ROM driver screws and SATA cable connects well.
CMB-67F Installation Guide
23
15. Find out the HD holder to install HD driver, it is under backside of the
CD-ROM holder.
CMB-67F Installation Guide
24
Put on HD driver into HD holder then turn the HD drive screws to
tighten. Refer picture A , B and C.
(If you don’t have HD drive please direct to step.18)
(A)
(B)
(C)
CMB-67F Installation Guide
25
16. Connect SATA cable from motherboard to the HD drive.
CMB-67F Installation Guide
26
17. Turn the CD-ROM driver screws and SATA cable connects well and turn
the screws..
CMB-67F Installation Guide
27
18. Turn the chassis shield screws to tighten well.
CMB-67F Installation Guide
28
19. Turn the chassis shield screws with the hanging holders to tighten well.
CMB-67F Installation Guide
29
Contact Information
Any advice or comment about our products and service, or anything we can help you please don’t hesitate to contact with us. We will do our best to support you for your products, projects and business
Taiwan Commate Computer Inc.
Address 19F, No. 94, Sec. 1, Xintai 5th Rd., Xizhi Dist New Taipei City, Taiwan
TEL +886-2-26963909
FAX +886-2-26963911
Website TUhttp://www.commell.com.twUT
E-Mail [email protected] (General Information) [email protected] (Technical Support)
Facebook https://www.facebook.com/pages/Taiwan-Commate-Computer-Inc/547993955271899
Twitter https://twitter.com/Taiwan_Commate
Commell is a brand name of Taiwan Commate Computer Inc.