DAB PUMPS reserves the right to make modifications without notice. 21 IN-LINE PUMPS CM / CM-G / DCM / DCM-G ELECTRIC IN-LINE PUMPS APPLICATIONS In-line port circulation pumps, suitable for heating, air conditioning, refrigeration and sanitary water systems. Available in the single and twin versions. CONSTRUCTION FEATURES PN 10 - PN 16 flanged suction and delivery ports with threaded holes for control manometers. Cast iron pump body and motor support, cast iron or technopolymer impeller depending on mode. Stainless steel motor shaft. External ventilation three-phase asynchronous motor. For its protection we recommend the use of remote overload cut-outs, in compliance with current local regulations. TECHNICAL DATA Operating range: from 1,2 to 420 m3/h with head of up to 41 metres. Pumped liquid: clean, free of solids and abrasives, non-viscous, non- aggressive, non-crystallised and chemically neutral, with properties similar to water. Maximum, glycol content 30 % (for other glycol percentages contact Technical Support). Liquid temperature range: from -10 °C to +130 °C for DN 40 - DN 50. from -10 °C to +140 °C for the remainder of the range. Maximum ambient temperature: +40 °C. Maximum operating pressure: PN10 : for DN 40 - DN 50. PN16 : Remainder of the range. Flanging: PN 16. Special executions on request: Other voltages and/or frequencies. Protection: IP 55. Insulation: class F. MATERIALS * In contact with the liquid N. PARTS* MATERIALS 1 PUMP BODY CAST IRON 250 UNI ISO 185 3 SUPPORT CAST IRON 250 UNI ISO 185 4 IMPELLER CAST IRON DN 65-80-100-125-150 / DCM Dn 40 - 50 / CM 40-1300T, CM 40-1450T, CM 50-1270T , CM 50-1420T TECHNOPOLYMER B CM 40-440T, CM 40-540T, CM 40-670T, CM 40-870T, CM 50-510T, CM 50-630T, CM 50-780T, CM 50-1000T 7 SHAFT WITH ROTOR AISI 304 STAINLESS STEEL X5 CrNiS 1809 UNI 6900/71 16 MECHANICAL SEAL CARBON/GRAPHITE 28 OR RING EPDM RUBBER 1 3 7 4 16 28 – Denomination index: (example) - Single pump D - Twin pump Circulator M = 4-pole motor M = 2-pole motor G = version with coupling (DN) nominal diameter of the flanged ports Maximum head (cm) A - Cast iron impeller B - Bronze impeller Mechanical seal type Motor P2 in kW M G C D 65 420 BAQE A 0,25 - Installation: horizontal or vertical position, provided that the motor is always above the pump. Vertical installation only for powers exceeding 7,5 kW. ENERGY EFFICIENCY ≥ 7.5 kW ≥ 7.5kW
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
DAB PUMPS reserves the right to make modifications without notice.
21
IN-L
INE
PUM
PS
CM / CM-G / DCM / DCM-GELECTRIC IN-LINE PUMPS
APPLICATIONSIn-line port circulation pumps, suitable for heating, air conditioning, refrigeration and sanitary water systems.Available in the single and twin versions.
CONSTRUCTION FEATURESPN 10 - PN 16 flanged suction and delivery ports with threaded holes for control manometers.Cast iron pump body and motor support, cast iron or technopolymer impeller depending on mode.Stainless steel motor shaft.External ventilation three-phase asynchronous motor. For its protection we recommend the use of remote overload cut-outs, in compliance with current local regulations.
TECHNICAL DATAOperating range: from 1,2 to 420 m3/h with head of up to 41 metres. Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallised and chemically neutral, with properties similar to water. Maximum, glycol content 30 % (for other glycol percentages contact Technical Support).Liquid temperature range: from -10 °C to +130 °C for DN 40 - DN 50.from -10 °C to +140 °C for the remainder of the range.Maximum ambient temperature: +40 °C.Maximum operating pressure: PN10 : for DN 40 - DN 50.PN16 : Remainder of the range.Flanging: PN 16.Special executions on request: Other voltages and/or frequencies.Protection: IP 55.
Insulation: class F.
MATERIALS
* In contact with the liquid
N. PARTS* MATERIALS
1 PUMP BODY CAST IRON 250 UNI ISO 1853 SUPPORT CAST IRON 250 UNI ISO 185
4 IMPELLER
CAST IRON DN 65-80-100-125-150 / DCM Dn 40 - 50 / CM 40-1300T, CM 40-1450T, CM 50-1270T , CM 50-1420T
TECHNOPOLYMER B CM 40-440T, CM 40-540T, CM 40-670T, CM 40-870T, CM 50-510T, CM 50-630T, CM 50-780T, CM 50-1000T
7 SHAFT WITH ROTOR AISI 304 STAINLESS STEEL X5 CrNiS 1809 UNI 6900/7116 MECHANICAL SEAL CARBON/GRAPHITE28 OR RING EPDM RUBBER
1
3
7
4
16
28
– Denomination index: (example)
- Single pumpD - Twin pump
Circulator
M = 4-pole motorM = 2-pole motor
G = version with coupling
(DN) nominal diameter of the flanged ports
Maximum head (cm)
A - Cast iron impellerB - Bronze impeller
Mechanical seal type
Motor P2 in kW
M GCD 65 420 BAQEA 0,25-
Installation: horizontal or vertical position, provided that the motor is always above the pump.Vertical installation only for powers exceeding 7,5 kW.
ENERGY EFFICIENCY
≥7.5 kW
≥ 7.5kW
DAB PUMPS reserves the right to make modifications without notice.
22
IN-L
INE
PUM
PS
ELECTRIC IN-LINE PUMPSIN-LINE ELECTRIC PUMPS FOR CIRCULATION SYSTEMS
PERFORMANCE RANGEThe performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
GRAPHIC SELECTION TABLE
1 1098765432 100806050403020 400300200
300 30007060403020
1 1,50,5 100806040 50302010 1587654
20010050 600400 20001000 60004000
1
10
8
6
5
4
3
2
100
120
Hm
HkPa H
ft
80
60
50
40
30
20
1
32
1500100060040030020015010080605030 402015105
15001000600400300200150100806050403015 20105
300
250
200
150
100
60
80
50
40
35
30
25
20
15
10
5
100
15150
80
60
50
40
30
20
1000
800
600
500
400
300
200
Q IMP gpm
Q US gpm
Q m3/h
Q l/s
Q l/min
ALM / ALP
KLM / KLP
DKLM / DKLP
CM / DCM
CP / DCP
DAB PUMPS reserves the right to make modifications without notice.
DAB PUMPS reserves the right to make modifications without notice.
28
IN-L
INE
PUM
PS
COUNTER FLANGES ON REQUEST
CM 40 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - SINGLE, FLANGEDPumped liquid temperature range: from -10 °C to +130 °C - Maximum ambient temperature: +40 °C
MODEL L L1 L2 B B1 B2H
H1 D D1 D2 D3D4
no. of holes
PACKING DIMENSIONS VOLUME(m3)
WEIGHT kg
- IE2 L/A L/B H - IE2
CM 40/440 T 390 200 190 231 118 113 – 453 95 40 PN 16 88 150 110
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
MODEL CENTRE DISTANCE
PUMP CONNECTIONS
ELECTRICAL DATA
POWER INPUT50 Hz n r.p.m. P1 MAX
WP2 NOMINAL In A
MOTOR TYPE– IE2
kW HP 230 400 230 400
CM 40-440 T 390 DN 40 3 x 230 - 400 V ~ 1480 0,28 0,75 1,00 – – 1,8 1,0 IE2
CM 40-540 T 390 DN 40 3 x 230 - 400 V ~ 1480 0,33 0,75 1,00 – – 1,8 1,0 IE2
CM 40-670 T 390 DN 40 3 x 230 - 400 V ~ 1480 0,39 0,75 1,00 – – 1,8 1,1 IE2
CM 40-870 T 390 DN 40 3 x 230 - 400 V ~ 1480 0,51 0,75 1,00 – – 1,9 1,1 IE2
MEI ≥ 0,60
DAB PUMPS reserves the right to make modifications without notice.
29
IN-L
INE
PUM
PS
COUNTER FLANGES ON REQUEST
CM 40 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - SINGLE, FLANGEDPumped liquid temperature range: from -10 °C to +130 °C - Maximum ambient temperature: +40 °C
MODEL L L1 L2 B B1 B2H
H1 D D1 D2 D3D4
no. of holes
PACKING DIMENSIONS VOLUME(m3)
WEIGHT kg
– IE2 L/A L/B H – IE2
CM 40/1300 T 380 200 180 245 118 127 – 445 100 40 PN 6 88 150 1104
CM 50 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - SINGLE, FLANGEDPumped liquid temperature range: from -10 °C to +130 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
MODEL CENTRE DISTANCE
PUMP CONNECTIONS
ELECTRICAL DATA
POWER INPUT50 Hz n r.p.m. P1 MAX
WP2 NOMINAL
In AMOTOR TYPE– IE2
kW HP 230 400 230 400
CM 50-510 T 425 DN 50 3 x 230 - 400 V ~ 1480 0,35 0,75 1,00 – – 1,8 1,0 IE2
CM 50-630 T 425 DN 50 3 x 230 - 400 V ~ 1480 0,5 0,75 1,00 – – 1,9 1,1 IE2
CM 50-780 T 425 DN 50 3 x 230 - 400 V ~ 1470 0,5 0,75 1,00 – – 1,9 1,1 IE2
CM 50-1000 T 425 DN 50 3 x 230 - 400 V ~ 1470 0,64 0,75 1,00 – – 2,1 1,2 IE2
MEI ≥ 0,60
DAB PUMPS reserves the right to make modifications without notice.
31
IN-L
INE
PUM
PS
MODEL L L1 L2 B B1 B2H
H1 D D1 D2 D3D4
no. of holes
PACKING DIMENSIONS VOLUME(m3)
WEIGHT kg
– IE2 L/A L/B H – IE2
CM 50/1270 T 400 220 180 280 149 131 – 495 110 50 PN 10 102 165 1254
CM 50 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - SINGLE, FLANGEDPumped liquid temperature range: from -10 °C to +130 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
MODEL CENTRE DISTANCE
PUMP CONNECTIONS
ELECTRICAL DATA
POWER INPUT50 Hz n r.p.m. P1 MAX
WP2 NOMINAL
In AMOTOR TYPE– IE2
kW HP 230 400 230 400
CM 50-1270 T 400 DN 50 3 x 230 - 400 V ~ 1450 1,4 1,10 1,50 – – 4,3 2,5 IE2
CM 50-1420 T 400 DN 50 3 x 230 - 400 V ~ 1450 1,4 1,10 1,50 – – 4,3 2,5 IE2
MEI ≥ 0,40
DAB PUMPS reserves the right to make modifications without notice.
CM-G 65 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - SINGLE, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
CM-G 65 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - SINGLE, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
MEI ≥ 0,60
¹ star start-up possible ( )
DAB PUMPS reserves the right to make modifications without notice.
34
IN-L
INE
PUM
PS
CM-G 80 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - SINGLE, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
0 Q m3/h
0 Q m3/h
0 Q m3/h
2010 30 50
20 30 5010
2010
40
40
4030 50
60
60
60
0
4
5
7
2
3
1
6
Hm
0
40
20
60
PkPa
0
0,5
1
1
1,5
2
NPSH m
0
1,5
0,5
kW
0
1
2
0 500 1000 Q l/min
0 10 155 Q l/s
0
20
5
15
10
H ft
0 100 15050 200 250 Q US gpm
0 100 15050 200 Q IMP gpm
NPSH ft
0
2
4
6
PHPP
CM 80-650
CM 80-550
CM 80-650
CM 80-650
CM 80-550
CM 80-550
MEI ≥ 0,60
DAB PUMPS reserves the right to make modifications without notice.
35
IN-L
INE
PUM
PS
CM-G 80 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - SINGLE, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
MEI ≥ 0,60
DAB PUMPS reserves the right to make modifications without notice.
36
IN-L
INE
PUM
PS
CM-G 80 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - SINGLE, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
MEI ≥ 0,60
¹ star start-up possible ( )
DAB PUMPS reserves the right to make modifications without notice.
37
IN-L
INE
PUM
PS
CM-G 80 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - SINGLE, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
CM-G 80 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - SINGLE, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
MEI ≥ 0,60
¹ star start-up possible ( )
DAB PUMPS reserves the right to make modifications without notice.
CM-G 100 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - SINGLE, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
CM-G 100 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - SINGLE, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
CM-G 100 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - SINGLE, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
CM-G 100 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - SINGLE, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
CM-G 100 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - SINGLE, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
CM-G 125 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - SINGLE, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
CM-G 125 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - SINGLE, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
CM-G 125 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - SINGLE, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
CM-G 150 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - SINGLE, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
DCM 40 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - TWIN, FLANGEDPumped liquid temperature range: from -10 °C to +130 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
MEI ≥ 0,40
DAB PUMPS reserves the right to make modifications without notice.
49
IN-L
INE
PUM
PS
COUNTER FLANGES ON REQUEST
MODEL CENTRE DISTANCE
PUMP CONNECTIONS
ELECTRICAL DATA
POWER INPUT50 Hz n r.p.m. P1 MAX
WP2 NOMINAL
In AMOTOR TYPE– IE2
kW HP 230 400 230 400
DCM 50/460 T 365 DN 50 3x230-400 V ~ 1450 0,41 0,25 0,33 – – 1,6 0,9 IE2
DCM 50/630 T 365 DN 50 3x230-400 V ~ 1450 0,57 0,37 0,50 – – 2,1 1,2 IE2
DCM 50/880 T 410 DN 50 3x230-400 V ~ 1450 0,79 0,50 0,70 – – 2,9 1,7 IE2
DCM 50 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - TWIN, FLANGEDPumped liquid temperature range: from -10 °C to +130 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
MEI ≥ 0,40
DAB PUMPS reserves the right to make modifications without notice.
50
IN-L
INE
PUM
PS
H
H1
D2
NN
L1 L2
L
B M
AXB1
B2
D1D
D4
D3
AC
B
H2
H
H1
D2
NN
L1 L2
L
B M
AXB1
B2
D1D
D4
D3
AC
B
H2
H
H1
D2
N N
L1L2
L
B MAXB1 B2
D1
D
D4
D3
AC B
H2
DCM-G 65 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - TWIN, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906. For the MEI index refer to the hydraulic data of the individual pump.
DAB PUMPS reserves the right to make modifications without notice.
51
IN-L
INE
PUM
PS
H
H1
D2
NN
L1 L2
L
B M
AXB1
B2
D1D
D4
D3
AC
B
H2
H
H1
D2
NN
L1 L2
L
B M
AXB1
B2
D1D
D4
D3
AC
B
H2
H
H1
D2
N N
L1L2
L
B MAXB1 B2
D1
D
D4
D3
AC B
H2
DCM-G 65 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - TWIN, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906. For the MEI index refer to the hydraulic data of the individual pump.
¹ star start-up possible ( )
DAB PUMPS reserves the right to make modifications without notice.
52
IN-L
INE
PUM
PS
H
H1
D2
NN
L1 L2
L
B M
AXB1
B2
D1D
D4
D3
AC
B
H2
H
H1
D2
NN
L1 L2
L
B M
AXB1
B2
D1D
D4
D3
AC
B
H2
H
H1
D2
N N
L1L2
L
B MAXB1 B2
D1
D
D4
D3
AC B
H2
DCM-G 80 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - TWIN, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906. For the MEI index refer to the hydraulic data of the individual pump.
DAB PUMPS reserves the right to make modifications without notice.
53
IN-L
INE
PUM
PS
H
H1
D2
NN
L1 L2
L
B M
AXB1
B2
D1D
D4
D3
AC
B
H2
H
H1
D2
NN
L1 L2
L
B M
AXB1
B2
D1D
D4
D3
AC
B
H2
H
H1
D2
N N
L1L2
L
B MAXB1 B2
D1
D
D4
D3
AC B
H2
DCM-G 80 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - TWIN, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906. For the MEI index refer to the hydraulic data of the individual pump.
DAB PUMPS reserves the right to make modifications without notice.
54
IN-L
INE
PUM
PS
H
H1
D2
NN
L1 L2
L
B M
AXB1
B2
D1D
D4
D3
AC
B
H2
H
H1
D2
NN
L1 L2
L
B M
AXB1
B2
D1D
D4
D3
AC
B
H2
H
H1
D2
N N
L1L2
L
B MAXB1 B2
D1
D
D4
D3
AC B
H2
DCM-G 80 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - TWIN, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906. For the MEI index refer to the hydraulic data of the individual pump.
¹ star start-up possible ( )
DAB PUMPS reserves the right to make modifications without notice.
55
IN-L
INE
PUM
PS
H
H1
D2
NN
L1 L2
L
B M
AXB1
B2
D1D
D4
D3
AC
B
H2
H
H1
D2
NN
L1 L2
L
B M
AXB1
B2
D1D
D4
D3
AC
B
H2
H
H1
D2
N N
L1L2
L
B MAXB1 B2
D1
D
D4
D3
AC B
H2
DCM-G 80 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - TWIN, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906. For the MEI index refer to the hydraulic data of the individual pump.
¹ star start-up possible ( )
DAB PUMPS reserves the right to make modifications without notice.
56
IN-L
INE
PUM
PS
H
H1
D2
NN
L1 L2
L
B M
AXB1
B2
D1D
D4
D3
AC
B
H2
H
H1
D2
NN
L1 L2
L
B M
AXB1
B2
D1D
D4
D3
AC
B
H2
H
H1
D2
N N
L1L2
L
B MAXB1 B2
D1
D
D4
D3
AC B
H2
DCM-G 80 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - TWIN, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906. For the MEI index refer to the hydraulic data of the individual pump.
¹ star start-up possible ( )
DAB PUMPS reserves the right to make modifications without notice.
DCM-G 100 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - TWIN, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906. For the MEI index refer to the hydraulic data of the individual pump.
DAB PUMPS reserves the right to make modifications without notice.
DCM-G 100 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - TWIN, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906. For the MEI index refer to the hydraulic data of the individual pump.
¹ star start-up possible ( )
DAB PUMPS reserves the right to make modifications without notice.
DCM-G 100 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - TWIN, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906. For the MEI index refer to the hydraulic data of the individual pump.
¹ star start-up possible ( )
DAB PUMPS reserves the right to make modifications without notice.
DCM-G 100 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - TWIN, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906. For the MEI index refer to the hydraulic data of the individual pump.
¹ star start-up possible ( )
DAB PUMPS reserves the right to make modifications without notice.
DCM-G 100 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - TWIN, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906. For the MEI index refer to the hydraulic data of the individual pump.
¹ star start-up possible ( )
DAB PUMPS reserves the right to make modifications without notice.
DCM-G 125 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - TWIN, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906. For the MEI index refer to the hydraulic data of the individual pump.
¹ star start-up possible ( )
DAB PUMPS reserves the right to make modifications without notice.
DCM-G 125 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - TWIN, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906. For the MEI index refer to the hydraulic data of the individual pump.
¹ star start-up possible ( )
DAB PUMPS reserves the right to make modifications without notice.
DCM-G 125 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - TWIN, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906. For the MEI index refer to the hydraulic data of the individual pump.
¹ star start-up possible ( )
DAB PUMPS reserves the right to make modifications without notice.
DCM-G 150 4 POLES- IN-LINE ELECTRIC PUMPS FOR HEATING, AIR CONDITIONING, REFRIGERATION, SOLAR, AND SANITARY SYSTEMS - TWIN, FLANGEDPumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40 °C
0 40 120 200 280 360 440 520 600 680 760
40 120 200 280 360 440 520 600 680 760
40 120 200 280 360 440 520 600 680 760
Q m3/h0
20
10
5
15
25
Hm
0
200
PkPa
0 2000 4000 6000 8000 10000 12000 Q l/min
0 20 60 100 140 180 220 Q l/s
0
H ft
0 400 800 1200 1600 2000 2400 2800 3200 Q US gpm
0 200 600 1000 1400 1800 2200 2600 Q IMP gpm
150
250
100
5020
80
60
40
- 955
- 1322
- 1600
- 1950
- 2200
- 2405
- 955
- 1322
- 1600
- 1950
- 2200
- 2405
- 2405- 2200- 1950- 1600- 1322- 955
MODEL CENTRE DISTANCE
PUMP CONNECTIONS
ELECTRICAL DATA
POWER INPUT50 Hz n r.p.m. P1 MAX
WP2 NOMINAL
In AMOTOR TYPE
MOTOR SIZE
I st. AIE2 IE3
IE2 IE3kW HP 400DCM-G 150-955/A/BAQE/5,5 800 DN 150 3 x 400 V ~ ¹ 1462 7,5 5,50 7,50 10,6 – MEC132S IE2 84,5 –
The performance curves are based on kinematic viscosity values = 1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906. For the MEI index refer to the hydraulic data of the individual pump.