CM10001000 Watt AC-DC Switchers
Options available:- Droop (Zero Wire) Current Sharing
- Forced Current Sharing
- Internal ORing Diode
©2017 Abbott Technologies, Inc. AT 2905B 6/2017
MBECertified Minority
Business Enterprise
n SBA Certified Woman-Ownedn Minority Business Enterprise (MBE)n
HUBZone Certifiedn ISO9001 and AS9100 Certifiedn QPL Certified
products
n NAICS Codes: 334416, 334419, 335311, 335999
n DUNS: 36-065-1954n Cage Code: 58910
8203 Vineland Ave l Sun Valley, CA 91352(818) 504-0644 l Sales
(800) 367-8200
Technical Support (818) 504-0644
AbbottTechnologies.com
Rock Solid Reliability for over 50 years. MADE IN
U. S. A.
Features:
- Power Factor Correction
- Compliant with MIL-STD-461, CE101, and CE102
- Meets MIL-S-901 (High Impact Shock)
- Meets applicable MIL-STD-810
- CM1000 fully sealed to meet IP65
(Optional connectors available to meet IP67)
CM1000
AbbottTechnologies.com
For Extreme Environments
3 Power Factor Correction3 Compliant with MIL-STD-461, CE101,
and CE102 3 Meets MIL-S-901 (High Impact Shock)3 Meets applicable
MIL-STD-810 3 Fully sealed to meet IP65 (Optional connectors
available to meet IP67)
Options: Droop (Zero Wire) Current Sharing, Forced Current
Sharing (up to 4 modules for a total of 4,000 watts)Internal ORing
Diode
Specifications:
Model Number System
Any specifications subject to change without notice.
Model Family (CM1000 = 1000 Watt Output)
S = Standard Connector (Unit meets IP65) or M = Fully Sealed
Waterproof Connector (Unit meets IP67)C = Condensing Humidity
Environment
Voltage Output (see chart to right for Voltage options and Max
Current)
Example as shown above: CM1000 - 1000 Watt Output with Standard
Connector, 28 Volt
Maximum Current Output Rating
Output Voltage Max Current12V 75A*
13.6V 73.5A
15V 66.7A
24V 41.7A
28V 35.7A
48V 20.8A
Ordering Information:
AbbottTechnologies.com
CM1000 S 28
Call our Technical Support Department with questions: (818)
504-0644
UNLESS OTHERWISE SPECIFIED
DO NOT SCALE DRAWINGFINISH
-
TOLERANCES ARE:DIMENSIONS ARE IN INCHES.
DECIMALS ANGLES
C
B11165-20CAD FILE NO
APPLICATION
NEXT ASSY
-
USED ON
USED ON
WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATAWITHIN THE
DEFINITION OF THE INTERNATIONAL TRAFFIC IN ARMSREGULATIONS (ITAR)
AND IS SUBJECT TO THE EXPORT CONTROL LAWSOF THE US GOVERNMENT
TRANSFER OF THIS DATA BY ANY MEANS TOA FOREIGN PERSON, WHETHER IN
THE UNITED STATES OR ABROAD,WITHOUT AN EXPORT LICENSE OR OTHER
APPROVAL FROM THE U.S.DEPARTMENT OF STATE, IS STRICTLY
PROHIBITED.
J
J1-A AC INPUT (LINE)
J1-B VDC OUTPUT RTN (-)
J3-A +SENSE
J2-A VDC OUTPUT (+)
J1-C CHASSIS GROUNDJ1-B AC INPUT (NEUTRAL)
J3-F RETURNJ3-E NC
28VDC@ 35.7A
J3-C CURRENT SHAREJ3-B -SENSE
TECHNOLOGIES, INC.TECHNOLOGIES, INC.
95-260 VRMS 47-440HzMFR58910-CM1000S28
J1 J3 J2
A BAC
B
9.00
(228
.60)
.75
(19.
05)
1.90
0(4
8.26
)
6.00 (152.40)
F
DC
EB
A
J3-D N INHIBIT
.926
(2.2
2)
9.00
(228
.60)
.900 (22.90)
.93 (2.23)
1.44(36.58)2.95(74.93)
N
DIMENSION IN PARENTHESIS ( ) ARE IN MILLIMETERS.
3.75
0(9
5.25
)
5.500(139.70)
3.75
0(9
5.25
)
*Output power limited by connector current rating. Please
contact technical support for alternative connector
information.
AC Input:95-260 VAC, 47-440Hz, Single Phase,Power Factor
Corrected. Meets MIL-STD-1399, Section 300, Type 1 Requirements
(Spike Voltage Test)
Efficiency:80% Minimum (88% Typ; 28 VDC
Model at 100% Load)
Line Regulation:+1% of Nominal over the Full Range of Line Input
Voltage
Load Regulation:+1% for Change from No Load to Full Load
Ripple and Noise:Peak-to-peak combined Ripple and Noisedoes not
exceed 2% of Nominal on theOutput Measured with a 20MHz
bandwidth
Temperature Range:Storage, Transport and Handling:
-50°C to + 85°CAmbient Temperature:
-40°C to 70°C
Baseplate Temperature:-40°C to +70°C with no Power Derating
Overtemperature Protection:Output shut down if maximum case
temperature limit is exceeded
Isolation:Input to Output: 1500 VDCInput to Case: 1500 VDCOutput
to Case: 500 VDC
Short Circuit Protection:Each unit is completely protected
againsta short circuit of any duration. The currentlimit circuit
nominally set at 120% of fullload to reduce voltage. Output is
latchedunder short circuit condition. Auto-recoveryfrom short
circuit option is available.
Remote Error Sensing:Standard
Input Protection:Internal Fuse
Control Features:INHIBIT (TTL LOW = TRUE)
Reliability: MTBF 124,545 calculated per
MIL-HDBK-217Fn.2/25C/Full Load Ground Benign Environment
Electromagnetic Compatibility: Meets the following MIL-STD-461
requirements: CE101, CE102
Outline Dimensions: Refer to Mechanical drawings on opposite
page
Weight: 5.5lbs Typical
Environmental Conditions:Shock Test: Unit meets MIL-S-901
requirements (lightweight)Vibration Test: Unit meets
MIL-STD-167,
Type 1 requirementsHumidity Test: Power supply operates
without any evidence of degraded performance in non-condensing
relativehumidity up to 95%
J1
B
C A
J2J3
BA
MS3102R24-9S
J2-A VDC OUTPUT (+)J2-B VDC OUTPUT RTN (-)
MS3110E10-6S
J3-A +SENSEJ3-B -SENSEJ3-C CURRENT SHAREJ3-D N INHIBITJ3-E
NCJ3-F RETURN
MS3102R16-10P
J1-A AC INPUT (LINE)J1-B AC INPUT (NEUTRAL)J1-C CHASSIS
GROUND
9