clutch driven plates new - csiclutch.comcsiclutch.com/_webmoduledata/documents/clutch driven plates new.pdf · 14-1022 280 28.6 10 facings are bonded to the back plates Rigid Dished

Clutch Driven Plates Sort numerically | Sort by outer diameter

CSI No.

Size (mm) OD

Hub Size

(mm) Major

ID

Splines (No. of Teeth)

No. of Boltholes/ Thickness/ Other Comments

Dished/ Rigid/ Springloaded

Button/ Ceramic/ Feramic/ Facing/ Paper/ Unlined

Main/ PTO/ Plate/ Torsion-dampener

Tractor Manufacturer

14-1000 280 25.4 10 compressed thickness: 7.3-7.9mm Rigid Facing PTO - Loose Fiat, Foton, New Holland 14-1001 330 44.5 10 compressed thickness: 10.1mm Springloaded Facing Main - Loose Ford, New Holland 14-1002 330 34.9 10 Rigid Facing Main - Loose Ford 14-1003 300 34.9 10 flywheel side Rigid Facing Main - Captive Or Loose Clayson, Ford 14-1004 327 32 10 Springloaded 12 Button Main - Loose John Deere 14-1005 300 32 10 Rigid Facing Main - Loose John Deere 14-1006 300 29 21 Rigid Dished Facing Main - Loose Massey Ferguson 14-1007 330 28.6 10 Rigid Dished Facing Main - Loose Massey Ferguson 14-1008 330 29 21 Springs Dished 10 Button Main - Loose Massey Ferguson 14-1009 330 29 21 Springs Dished Facing Main - Loose Massey Ferguson 14-1010 300 28.6 10 facings bonded to backplates Rigid Dished Facing Main - Loose Massey Ferguson 14-1011 300 29 21 facings bonded to backplates Rigid Dished Facing Main - Loose Massey Ferguson 14-1012 310 28.6 10 Rigid Dished 10 Button Main - Loose Massey Ferguson 14-1013 330 29 21 Rigid Dished Facing Main - Loose Massey Ferguson 14-1014 330 29 21 Rigid Dished 10 Button Main - Loose Massey Ferguson 14-1015 330 28.6 10 Rigid Dished 10 Button Main - Loose Massey Ferguson 14-1016 280 34.9 10 Rigid Facing Main - Loose Clayson 14-1017 280 40 14 compressed thickness: 9.7-10.3mm Rigid Facing Main - Captive Case International, Fiat, New Holland, YTO 14-1018 250 40 14 Rigid Facing Main - Captive Fiat 14-1019 280 40 14 Rigid 10 Button Main - Captive Fiat, New Holland 14-1020 300 42 8 Rigid Facing Main - Captive Deutz 14-1021 300 25.8 15 Rigid Facing Main - Loose John Deere 14-1022 280 28.6 10 facings are bonded to the back plates Rigid Dished Facing Main - Loose Massey Ferguson, TFA 14-1023 300 28.6 10 Rigid Dished Solid Ceramic Main - Loose Massey Ferguson 14-1024 300 29 21 Rigid Dished Solid Ceramic Main - Loose Massey Ferguson 14-1025 330 29 21 Springs Dished Solid Ceramic Main - Loose Massey Ferguson 14-1026 230 25.4 15 flywheel side Rigid Facing Main - Captive Ford 14-1027U 170 38 23 4 bolt holes - square shaped 6 Springs Unlined PTO Damper - Captive John Deere 14-1028 280 26 10 Springloaded Facing Main - Loose Ford 14-1029 280 25.4 15 flywheel side Rigid Facing PTO - Captive Or Loose Ford 14-1030 280 25.4 15 flywheel side Rigid Facing PTO - Captive Or Loose Ford 14-1031 305 41.3 25 Springloaded Facing Main - Loose Ford 14-1032 280 25 13 flywheel side - compressed thickness: 7.6mm Rigid Facing PTO - Captive (Omg) John Deere 14-1033 280 35 19 gearbox side Springloaded 10 Button Main - Captive (Omg) John Deere 14-1034 350 44.5 27 Springloaded 12 Button Main - Loose Case International, Massey Ferguson, White Oliver 14-1035 280 45 22 Rigid Facing PTO - Captive Case International 14-1036 310 45 22 Rigid 10 Button PTO - Captive Case International 14-1037 280 40 14 compressed thickness: 9.6-10.4mm Springloaded 12 Button Main - Captive Case International, Fiat, Foton, New Holland, YTO 14-1038 280 25.4 10 compressed thickness: 7.3 - 7.9mm Rigid Facing PTO - Loose Fiat, Landini, Massey Ferguson, McCormick 14-1039 310 32 11 compressed thickness: 7.6mm Rigid Facing PTO - Loose Fiat 14-1040 280 45 16 Rigid 12 Button Main - Captive Fiat 14-1041 310 28 10 compressed thickness: 9.4mm Rigid Facing PTO - Loose Fiat, Foton, New Holland, Universal 14-1042 330 45 16 Springloaded Facing Main - Captive Fiat

CSI No.

Size (mm) OD

Hub Size

(mm) Major

ID

Splines (No. of Teeth)

No. of Boltholes/ Thickness/ Other Comments

Dished/ Rigid/ Springloaded

Button/ Ceramic/ Feramic/ Facing/ Paper/ Unlined

Main/ PTO/ Plate/ Torsion-dampener

Tractor Manufacturer

14-1043 310 45 16 hub length to clutch driven plate = 19.5mm Rigid 12 Button Main - Captive Fiat, New Holland 14-1044 250 34.9 10 Rigid Facing Main - Loose Massey Ferguson 14-1045 280 34.9 10 Rigid Facing Main - Loose Fiat, Ford 14-1046 300 26 10 Rigid Facing Main - Loose Ford 14-1047 330 41.3 25 compressed thickness: 8.7mm Rigid Facing Main - Loose Ford 14-1048 225 38 23 facings are bonded to the carrier plate Springloaded Facing PTO Damper - Captive John Deere 14-1049 280 25.8 15 Rigid Facing Main - Loose John Deere 14-1050 180 26 10 Rigid Facing Main - Loose - 14-1051 310 29 21 Rigid Dished 10 Button Main - Loose Massey Ferguson 14-1052 225 32 10 Rigid Facing Main - Loose Massey Ferguson 14-1053 200 32 10 2 per machine required Rigid Facing Main - Loose Massey Ferguson 14-1054U 241 41.3 25 3 bolt holes Rigid Unlined PTO Hub - Captive Massey Ferguson 14-1055 310 48 23 Rigid 14 Button Main - Captive Landini 14-1056 330 48 23 Rigid 16 Button Main - Captive Landini 14-1057 330 30 16 Rigid Facing PTO - Loose Landini 14-1058 310 40 14 Rigid 16 Button Main - Captive Landini, Massey Ferguson 14-1059 310 25.4 10 Rigid Facing PTO - Loose Landini, Massey Ferguson 14-1060 320 32 10 Rigid Facing Main - Loose John Deere 14-1061 327 32 10 Rigid Facing Main - Loose John Deere 14-1062U 198 38 23 6 bolt holes - triangular shaped 6 Springs Unlined PTO Damper - Captive John Deere 14-1063U 198 44.5 27 6 bolt holes - triangular shaped 6 Springs Unlined PTO Damper - Captive John Deere 14-1064U 170 44.5 27 4 bolt holes - square shaped 6 Springs Unlined PTO Damper - Captive John Deere 14-1065U 192 38 23 6 bolt holes - round shaped 6 Springs Unlined PTO Damper - Captive John Deere 14-1066 320 25.8 15 Rigid Facing Main - Loose John Deere 14-1067 310 32 17 Rigid 16 Button Main - Loose MB Trac (Mercedes) 14-1068 180 19 10 Rigid Facing Main - Loose Sambron 14-1069 226 41.3 25 Rigid Facing PTO - Captive - 14-1070 280 28.58 10 Rigid 10 Button Main - Loose Case International 14-1071 305 34.9 10 oil-immersed Rigid Paper Facing Main - Loose Hyster 14-1072 300 34.9 10 Rigid 12 Button Main - Loose Timberjack 14-1073 300 26 10 Springloaded Facing Main - Loose Ford 14-1074 350 29 11 Springloaded 12 Button Main - Loose Case International 14-1075 310 35 12 Rigid Facing Main - Loose Fiat 14-1076 280 44.5 10 Rigid Facing Main - Loose - 14-1077 280 28.58 10 Rigid Facing Main - Loose Case International 14-1078 305 38.1 10 Rigid 10 Button Main - Loose Case International 14-1079 330 44.5 10 compressed thickness: 10.1mm Rigid 18 Button Main - Loose Ford, New Holland 14-1080 327 38.1 10 Rigid 12 Button Main - Loose Volvo 14-1081 350 44.5 10 Springloaded 12 Button Main - Loose Ford 14-1082 280 35 16 Rigid Facing PTO - Loose Deutz 14-1083 225 32 10 Rigid Facing Main - Loose - 14-1084 230 32 17 Rigid Facing PTO - Loose Deutz 14-1085 250 32 17 Rigid Facing PTO - Loose Deutz 14-1086 250 32 10 Rigid Facing PTO - Loose Deutz 14-1087 280 25.8 15 Rigid Facing Main - Loose John Deere 14-1088 250 44.5 10 Rigid Facing PTO - Loose -

CSI No.

Size (mm) OD

Hub Size

(mm) Major

ID

Splines (No. of Teeth)

No. of Boltholes/ Thickness/ Other Comments

Dished/ Rigid/ Springloaded

Button/ Ceramic/ Feramic/ Facing/ Paper/ Unlined

Main/ PTO/ Plate/ Torsion-dampener

Tractor Manufacturer

14-1089 280 40 14 Springloaded 10 Button Main - Captive Landini, Massey Ferguson 14-1090 280 40 14 Springloaded Facing Main - Captive Landini, Massey Ferguson 14-1091 280 40 20 Rigid Facing Main - Captive Deutz 14-1092 280 40 20 Springloaded Facing Main - Captive Deutz 14-1093 280 42 8 gearbox side Springloaded Facing Main - Captive Deutz 14-1094 280 32 10 flywheel side Rigid Facing PTO - Captive Deutz 14-1095 280 45 22 Rigid 8 Button PTO - Captive Case International 14-1096 280 40 14 compressed thickness: 9.6-10.4mm Springloaded 10 Button Main - Captive Fiat, New Holland 14-1097 280 28 10 Rigid Facing PTO - Loose Fiat 14-1098 280 28.6 10 Rigid Facing Main - Loose Massey Ferguson 14-1099 280 50 24 Rigid Facing PTO - Captive - 14-1100 280 28.58 10 Springloaded 8 Button Main - Loose Case International 14-1101 280 28.58 10 Springloaded 12 Button Main - Loose Case International 14-1102 280 28.58 10 Springloaded 16 Button Main - Loose Case International 14-1103 280 40 14 Rigid 10 Button Main - Captive Fiat, New Holland 14-1104 280 40 14 compressed thickness: 9.6-10.4mm Springloaded 10 Button Main - Captive Case International, Fiat, New Holland 14-1105 280 40 14 compressed thickness: 9.7- 10.3mm Springloaded Facing Main - Captive Case International, Fiat, Ford, New Holland, YTO 14-1106 280 40 14 Springloaded 10 Button Main - Captive Case International, Fiat, Ford, New Holland 14-1107 300 48 23 Rigid 12 Button Main - Captive Deutz 14-1108 300 25.8 15 Springloaded Button Main - Loose John Deere 14-1109 295 45 21 Rigid 16 Button Main - Captive Deutz 14-1110 295 28.58 10 Springloaded 10 Button Main - Loose Case International 14-1111 300 29 21 Springs Dished Facing Main - Loose Massey Ferguson 14-1112 300 29 21 Rigid Dished Ceramic Main - Loose Massey Ferguson 14-1113 310 45 16 Springloaded 12 Button Main - Captive Fiat 14-1114 310 45 22 Rigid Facing PTO - Captive MB Trac (Mercedes) 14-1115 310 30 16 Rigid Facing PTO - Loose Deutz 14-1116 310 42 8 Rigid Facing Main - Captive Deutz 14-1117 310 45 21 Springloaded 16 Button Main - Captive Deutz 14-1118 310 28.58 10 Springloaded 14 Button Main - Loose Case International 14-1119 310 30 16 Rigid Facing PTO - Loose Landini 14-1120 310 50 24 Rigid Facing PTO - Captive MB Trac (Mercedes) 14-1121 310 35 16 2 per machine required Springloaded 12 Button Main - Captive Or Loose Deutz 14-1122 310 45 21 2 per machine required Springloaded 12 Button Main - Captive Or Loose Deutz 14-1123 310 50 18 Rigid 16 Button Main - Captive Fiat 14-1124 310 45 16 Rigid 12 Button Main - Captive Fiat, Foton, New Holland, Universal 14-1125 310 40 14 Springloaded 16 Button Main - Captive Landini, Massey Ferguson 14-1126 310 45 16 Springloaded 12 Button Main - Captive Case International, Fiat, New Holland 14-1127 320 32 10 Springloaded 14 Button Main - Loose John Deere 14-1128 321 44.5 10 compressed thickness: 10.1mm Springloaded 14 Button Main - Loose Ford, New Holland 14-1129 330 48 23 Rigid 12 Button Main - Captive Deutz 14-1130 327 32 10 Springloaded 10 Button Main - Loose John Deere 14-1131 327 32 10 Springloaded Facing Main - Loose John Deere 14-1132 330 48 23 Springloaded 16 Button Main - Captive Landini 14-1133 330 29 21 Springs Dished Solid Ceramic Main - Loose - 14-1134 350 50 18 8 paddles Springloaded 16 Button Main - Loose Fiat

CSI No.

Size (mm) OD

Hub Size

(mm) Major

ID

Splines (No. of Teeth)

No. of Boltholes/ Thickness/ Other Comments

Dished/ Rigid/ Springloaded

Button/ Ceramic/ Feramic/ Facing/ Paper/ Unlined

Main/ PTO/ Plate/ Torsion-dampener

Tractor Manufacturer

14-1135 350 35 16 Springloaded 14 Button Main - Loose Deutz 14-1136 342 29 21 Rigid Dished Facing Main - Loose Massey Ferguson 14-1137 280 25.4 10 compressed thickness: 7.3 - 7.9mm Rigid Facing PTO - Loose Case International, Fiat, Ford, New Holland 14-1138 310 28 18 Rigid 12 Button Main - Loose John Deere 14-1139 330 26 10 Springloaded Facing Main - Loose Ford, New Holland 14-1140 310 44.5 10 Rigid 12 Button Main - Loose Poclain 14-1141U 350 44.5 13 6 bolt holes Springloaded Unlined Torsion Damper - 14-1142 280 26 10 Rigid 12 Button Main - Loose - 14-1143 327 28.6 10 Rigid Dished Ceramic Main - Loose Massey Ferguson 14-1144 280 40 14 Rigid Facing Main - Captive Case International 14-1145 280 25.4 10 Rigid Facing PTO - Loose Case International, New Holland, YTO 14-1146 310 28.58 10 Springloaded 10 Button Main - Loose Case International, McCormick 14-1147 280 40 12 Springloaded Facing Main - Captive Case International, Renault 14-1148 280 22.2 13 Rigid Facing PTO - Loose Case International 14-1149U 354 32 - 6 bolt holes Arched Coilspring Unlined Torsion Damper Case International, McCormick 14-1150 280 40 14 Springloaded Facing Main - Captive Case International 14-1151 280 40 14 Springloaded 10 Button Main - Captive Case International, YTO 14-1152 276 36.2 21 oil-immersed 6 Springs Paper Facing Torsion Damper Case International 14-1153 276 36 24 oil-immersed 6 Springs Paper Facing Torsion Damper Case International 14-1154 310 28.58 10 Springloaded 12 Button Main - Loose Case International, David Brown 14-1155 280 28.58 10 narrow width facing Springloaded Facing Main - Loose Case International 14-1156 280 28.58 10 wide width facing Springloaded Facing Main - Loose Case International 14-1157 280 28.58 10 compressed thickness: 9mm Springloaded 10 Button Main - Loose Case International 14-1158 280 28.58 10 Springloaded Facing Main - Loose Case International 14-1159 280 25 13 compressed thickness: 10.3mm Springloaded Facing Main - Loose Case International 14-1160 228 45 25 Rigid Facing PTO - Captive Case International 14-1161 290 25 13 Springloaded Facing Main - Loose Case International 14-1162 280 25 13 Springloaded Facing Main - Loose Case International 14-1163 250 25 13 compressed thickness: 8.9mm Springloaded Facing Main - Loose Case International 14-1164 250 25 13 compressed thickness: 8.9mm Springloaded 10 Button Main - Loose Case International 14-1165 250 25 13 Springloaded 8 Button Main - Loose Case International 14-1166 250 25 13 Springloaded Facing Main - Loose Case International 14-1167 250 44.5 10 gearbox side Rigid Facing Main - Loose Case International, David Brown 14-1168 250 28.58 10 flywheel side Rigid Facing PTO - Loose David Brown 14-1169 295 28.58 10 Springloaded Facing Main - Loose Case International 14-1170 310 48 23 Springloaded 12 Button Main - Captive Case International 14-1171 310 30 16 Rigid 12 Button PTO - Loose Case International 14-1172 305 38.1 10 Rigid 12 Button Main - Loose Case International 14-1173 280 22.2 13 Rigid Facing PTO - Loose Case International, Renault 14-1174 280 40 12 Springloaded 10 Button Main - Captive Renault 14-1175 254 28.83 10 Rigid Facing Main - Loose Case International 14-1176 300 29 11 Springloaded 12 Button Main - Loose Case International 14-1177 280 34.9 21 Springloaded 8 Button Main - Loose Case International 14-1178U 350 29 11 6 bolt holes - bolt circle = 330.2mm 10 Springs Unlined Torsion Damper Case International 14-1179 280 45 16 Rigid Facing Main - Loose Case International 14-1180 300 155 - 8 bolt holes - bolt circle = 279.4mm Rigid 12 Button Plate Case International

CSI No.

Size (mm) OD

Hub Size

(mm) Major

ID

Splines (No. of Teeth)

No. of Boltholes/ Thickness/ Other Comments

Dished/ Rigid/ Springloaded

Button/ Ceramic/ Feramic/ Facing/ Paper/ Unlined

Main/ PTO/ Plate/ Torsion-dampener

Tractor Manufacturer

14-1181U 348 40 (35) 14 8 bolt holes - 4 locating lugs 8 Springs Unlined Torsion Damper Case International, New Holland 14-1182U 348 40 (35) 14 9 bolt holes 8 Springs Unlined Torsion Damper Case International, Fiat, Ford, New Holland 14-1183U 348 40 (35) 14 8 bolt holes - 4 locating lugs 8 Springs Unlined Torsion Damper Case International, New Holland 14-1184U 354 45.5(38.3) 13 6 bolt holes 6 Springs Unlined Torsion Damper Case International, McCormick 14-1185U 380 35 13 6 bolt holes - bolt circle = 330.2mm 10 Springs Unlined Torsion Damper Case International 14-1186 380 44.5 16 Springloaded 24 Button Main - Loose Case International 14-1187 305 50 31 oil-immersed 10 Springs Paper Facing Torsion Damper Case International 14-1188 350 35 13 Springloaded 16 Button Main - Loose Case International 14-1189 350 44.5 10 2 per machine required Springloaded Button Main - Loose Case International 14-1190U 350 44.5 13 6 bolt holes - bolt circle = 330.2mm 8 Springs Unlined Torsion Damper Case International 14-1191 280 44.5 10 Rigid Facing Main - Loose David Brown, Landini 14-1192 280 28.58 10 Rigid Facing PTO - Loose David Brown 14-1193 280 44.5 10 2 per machine required Rigid 8 Button Main - Loose David Brown 14-1194 280 44.5 10 2 per machine required Rigid Facing Main - Loose David Brown 14-1195 280 44.5 10 Rigid Facing Main - Captive David Brown 14-1196 300 44.5 10 Rigid Dished Facing Main - Captive David Brown, Leyland (Nuffield) 14-1197 305 28.6 10 Rigid Facing PTO - Loose David Brown 14-1198 300 44.5 10 Rigid Dished Solid Ceramic Main - Captive David Brown 14-1199 310 40 24 Springloaded 12 Button Main - Loose Deutz, Same 14-1200 350 50 24 Rigid 14 Button Main - Loose Deutz, Same 14-1201 350 50 24 Rigid Facing Main - Loose Deutz, Same 14-1202 225 40 10 gearbox side Springloaded Facing Main - Captive Deutz 14-1203 225 32 10 flywheel side Rigid Facing PTO - Captive Deutz 14-1204 225 40 20 Rigid Facing Main - Captive Deutz 14-1205 225 32 17 Rigid Facing PTO - Loose Deutz 14-1206 280 40 20 Springloaded 10 Button Main - Captive Deutz 14-1207 280 32 17 Rigid Facing PTO - Loose Deutz 14-1208 280 32 10 Rigid Facing PTO - Loose Deutz 14-1209 280 40 20 Springloaded 10 Button Main - Captive Deutz 14-1210 310 45 21 Springloaded Facing Main - Captive Deutz 14-1211 327 48 22 Springloaded 12 Button Main - Loose Deutz 14-1212 310 48 22 2 per machine required Springloaded 12 Button Main - Captive Or Loose Deutz 14-1213 350 45 21 Rigid 14 Button Main - Loose Deutz 14-1214 330 45 16 Springloaded Facing Main - Captive Fiat 14-1215 250 25.4 10 Rigid Facing PTO - Loose Fiat 14-1216 225 35 18 Springloaded Facing Main - Captive Fiat 14-1217 225 22 13 Rigid Facing PTO - Loose Fiat 14-1218 250 35 18 compressed thickness: 10.1-10.5mm Springloaded Facing Main - Captive Fiat, Ford, New Holland 14-1219 250 22 13 compressed thickness: 8.5-8.9mm Rigid Facing PTO - Loose Fiat, Ford, New Holland 14-1220 280 35 18 compressed thickness: 9.7-10.3mm Springloaded Facing Main - Captive Fiat, New Holland 14-1221 280 22 13 compressed thickness: 7.3-7.9mm Rigid Facing PTO - Loose Fiat, New Holland 14-1222 280 45 16 Rigid 12 Button Main - Captive Fiat 14-1223 280 28 10 Rigid Facing PTO - Loose Fiat 14-1224 310 28 10 compressed thickness: 7.6mm Rigid Facing PTO - Loose Fiat, New Holland 14-1225 310 45 16 Rigid 12 Button Main - Captive Fiat, New Holland 14-1226 310 45 16 Springloaded 12 Button Main - Captive Fiat

CSI No.

Size (mm) OD

Hub Size

(mm) Major

ID

Splines (No. of Teeth)

No. of Boltholes/ Thickness/ Other Comments

Dished/ Rigid/ Springloaded

Button/ Ceramic/ Feramic/ Facing/ Paper/ Unlined

Main/ PTO/ Plate/ Torsion-dampener

Tractor Manufacturer

14-1227 310 45 16 Rigid 12 Button Main - Captive - 14-1228 250 28.8 10 Rigid Facing Main - Loose Massey Ferguson 14-1229 310 32 11 compressed thickness: 8.2mm Rigid Facing PTO - Loose Fiat 14-1230 310 50 18 Rigid 16 Button Main - Captive Fiat 14-1231 310 32 11 compressed thickness: 9.2mm Rigid Facing PTO - Loose Fiat 14-1232 310 50 18 Rigid 16 Button Main - Captive Fiat 14-1233 350 50 18 with rigid carrier plate Springloaded 16 Button Main - Loose Fiat 14-1234 350 40 14 Springloaded 16 Button Main - Loose Fiat 14-1235U 350 40 14 6 bolt holes 16 Springs Unlined Torsion Damper Fiat 14-1236 310 50 18 2 per machine required Springloaded 12 Button Main - Captive Or Loose Fiat 14-1237 280 40 14 Springloaded Facing Main - Captive Fiat, Ford, New Holland 14-1238 280 25.4 10 Rigid 8 Button PTO - Loose Case International, Fiat, Ford, New Holland 14-1239 310 25.4 10 Rigid Facing PTO - Loose Case International, Fiat, New Holland 14-1240 225 35 19 Rigid Facing PTO - Captive Yanmar 14-1241 330 50 18 Springloaded 10 Button Main - Loose Case International, Fiat, New Holland 14-1242 350 50 18 Springloaded 12 Button Main - Loose Fiat, New Holland 14-1243 254 50 18 gearbox side Rigid Facing PTO - Captive Fiat 14-1244 280 35 12 flywheel side Rigid 16 Button Main - Captive Fiat 14-1245 280 50 18 dished carrier plate for lever travel Dished Rigid Facing PTO - Captive Fiat 14-1246 280 35 12 flywheel side Rigid Facing Main - Captive Fiat 14-1247 310 28 10 compressed thickness: 8.2mm Rigid Facing PTO - Loose Fiat, New Holland 14-1248 310 45 16 Rigid 12 Button Main - Captive Fiat 14-1249 250 35 18 compressed thickness: 8.1-8.7mm Springloaded Facing Main - Captive Fiat, New Holland 14-1250 250 22 13 compressed thickness: 8.1-8.7mm Rigid Facing PTO - Loose Fiat, New Holland 14-1251 280 34.9 10 Rigid 10 Button Main - Loose Ford 14-1252 225 35 19 Rigid Facing PTO - Captive Ford 14-1253 225 25 13 Rigid Facing Main - Loose Ford 14-1254 280 40 14 Springloaded Facing Main - Captive Ford, New Holland 14-1255 280 40 14 Springloaded Facing Main - Captive Ford, New Holland 14-1256 330 44.5 10 compressed thickness: 10.1mm Springloaded 18 Button Main - Loose Ford, New Holland 14-1257 330 44.5 10 compressed thickness: 10.1mm Rigid 12 Button Main - Loose Ford, New Holland 14-1258 330 44.5 10 compressed thickness: 10.1mm Springloaded 12 Button Main - Loose Ford, New Holland 14-1259 184 20 10 Rigid Facing Main - Loose Yanmar 14-1260 297 50.8 31 Springloaded Facing Torsion Damper Ford 14-1261 350 41.3 25 Springloaded Facing Main - Loose Ford 14-1262 350 44.5 10 Springloaded Facing Main - Loose Ford 14-1263 230 47.63 29 gearbox side Rigid Facing PTO - Captive Ford 14-1264 300 53.98 16 gearbox side Rigid Facing PTO - Captive Ford 14-1265U 262 34.93 10 6 bolt holes 6 Springs Unlined Torsion Damper Ford, New Holland 14-1266 327 44.5 10 Springloaded 16 Button Main - Loose Ford, New Holland 14-1267 tba - - - - - - 14-1268 225 25 13 Rigid Facing PTO - Loose John Deere 14-1269 225 25 13 Springloaded Facing PTO - Loose John Deere 14-1270 225 35 19 Springloaded 12 Button Main - Captive John Deere 14-1271 280 25.8 15 Springloaded Facing Main - Loose John Deere 14-1272 280 25.8 15 Springloaded Facing Main - Loose John Deere

CSI No.

Size (mm) OD

Hub Size

(mm) Major

ID

Splines (No. of Teeth)

No. of Boltholes/ Thickness/ Other Comments

Dished/ Rigid/ Springloaded

Button/ Ceramic/ Feramic/ Facing/ Paper/ Unlined

Main/ PTO/ Plate/ Torsion-dampener

Tractor Manufacturer

14-1273 280 25.8 15 Springloaded 10 Button Main - Loose John Deere 14-1274 295 25.8 15 Springloaded Facing Main - Loose John Deere 14-1275 320 32 10 Springloaded Facing Main - Loose John Deere 14-1276U tba 70 32 12 bolt holes 9 Springs Unlined Torsion Damper MB Trac (Mercedes) 14-1277 380 50.8 10 flywheel side Springloaded Facing Main - Loose MB Trac (Mercedes) 14-1278 320 32 10 Springloaded Facing Main - Loose John Deere 14-1279 320 25.8 15 Springloaded Facing Main - Loose John Deere 14-1280 300 32 10 Rigid 12 Button Main - Loose John Deere 14-1281 327 25.8 15 Springloaded 10 Button Main - Loose John Deere 14-1282 300 32 10 Rigid 12 Button Main - Loose John Deere 14-1283 300 32 10 Rigid Facing Main - Loose John Deere 14-1284 300 32 10 Rigid 12 Button Main - Loose John Deere 14-1285 327 25.8 15 Springloaded Facing Main - Loose John Deere 14-1286 320 25.8 15 Springloaded Facing Main - Loose John Deere 14-1287 320 25.8 15 Springloaded Facing Main - Loose John Deere 14-1288 321 25.8 15 Springloaded 14 Button Main - Loose John Deere 14-1289 280 45 28 Rigid Facing PTO - Captive John Deere 14-1290 280 35 19 gearbox side Springloaded 12 Button Main - Captive (Omg) John Deere 14-1291 250 34.9 10 Rigid Facing Main - Loose John Deere 14-1292 250 34.9 10 Rigid 12 Button Main - Loose John Deere 14-1293 250 32 10 Rigid 12 Button Main - Loose John Deere 14-1294 250 32 10 Rigid Facing Main - Loose John Deere 14-1295 280 32 10 Springloaded Facing Main - Loose John Deere 14-1296 280 32 10 Rigid 10 Button Main - Loose John Deere 14-1297 280 25.8 15 Rigid Facing Main - Loose John Deere 14-1298 280 25.8 15 Rigid Facing Main - Loose John Deere 14-1299 280 25.8 15 Springloaded 10 Button Main - Loose John Deere 14-1300 250 34 20 Springloaded Facing Main - Loose John Deere 14-1301 250 40 20 Springloaded Facing Main - Loose - 14-1302 280 32 10 Rigid 8 Button Main - Loose John Deere 14-1303 280 32 10 Rigid 10 Button Main - Loose John Deere 14-1304 305 32 10 Rigid 10 Button Main - Loose John Deere 14-1305 330 35 21 facings are bonded to the carrier plate Springloaded Facing Main - Loose John Deere 14-1306 280 32 10 Rigid Facing Main - Loose John Deere 14-1307 300 27 16 Rigid Facing Main - Loose John Deere 14-1308 300 27 16 Rigid 12 Button Main - Loose John Deere 14-1309 250 43 26 Rigid Facing PTO - Captive John Deere 14-1310 300 32 19 Rigid 16 Button Main - Loose John Deere 14-1311 280 25.8 15 Rigid Facing Main - Loose John Deere 14-1312 250 43 26 Rigid Facing PTO - Captive John Deere 14-1313 310 35 21 2 per machine required Rigid Facing Main - Loose John Deere 14-1314 310 35 21 2 per machine required Rigid 12 Button Main - Loose John Deere 14-1315 310 50.8 21 2 per machine required Rigid 8 Button Main - Loose John Deere 14-1316 310 32 19 Rigid 12 Button Main - Loose John Deere 14-1317 225 30 16 Springloaded Facing Main - Captive Landini 14-1318 225 17 9 Rigid Facing PTO - Loose Landini

CSI No.

Size (mm) OD

Hub Size

(mm) Major

ID

Splines (No. of Teeth)

No. of Boltholes/ Thickness/ Other Comments

Dished/ Rigid/ Springloaded

Button/ Ceramic/ Feramic/ Facing/ Paper/ Unlined

Main/ PTO/ Plate/ Torsion-dampener

Tractor Manufacturer

14-1319 280 35 18 Springloaded Facing Main - Captive Or Loose Landini 14-1320 250 22 18 Rigid Facing PTO - Loose Landini 14-1321 280 35 18 Springloaded 10 Button Main - Loose Landini 14-1322 280 40 14 Springloaded Facing Main - Captive Landini, McCormick 14-1323 350 52.5 24 Springloaded 14 Button Main - Captive Or Loose Landini 14-1324 350 30 16 Rigid 8 Button PTO - Loose Landini 14-1325U 294 54.6 (50.4 26 8 bolt holes 8 Springs Unlined Torsion Damper Landini 14-1326 270 56 10 Rigid Facing Main - Captive Landini 14-1327 250 26 10 Rigid Facing PTO - Loose Landini 14-1328 240 40 14 Rigid Facing Main - Captive Or Loose Fiat, Landini 14-1329 240 22.2 10 Rigid Facing PTO - Loose Fiat, Landini 14-1330 280 32 10 Rigid Facing Main - Loose Landini 14-1331 250 22.2 10 Rigid Facing PTO - Loose Landini 14-1332 280 45 16 Rigid Facing Main - Loose Landini 14-1333 300 56 10 Rigid Facing Main - Loose Landini 14-1334 300 26 10 Rigid Facing PTO - Loose Landini 14-1335 300 28 10 Rigid Facing PTO - Loose Landini 14-1336 280 40 14 Springloaded 12 Button Main - Captive Landini, Massey Ferguson 14-1337U 241 44.5 10 3 bolt holes Rigid Unlined PTO Hub - Captive Massey Ferguson 14-1338 215 25 13 Springloaded Facing Main - Loose Hinomoto, Massey Ferguson 14-1339 215 25 13 Rigid Facing Main - Loose Hinomoto, Massey Ferguson 14-1340 310 29 21 Springs Dished 10 Button Main - Loose Massey Ferguson 14-1341 342 29 21 Rigid Dished 12 Button Main - Loose Massey Ferguson 14-1342U 210 41.3 25 3 bolt holes Rigid Unlined PTO Hub - Captive Massey Ferguson 14-1343 200 25 13 Springloaded Facing Main - Loose Massey Ferguson 14-1344 240 40 12 Springloaded Facing Main - Loose Massey Ferguson 14-1345 225 40 22 Springloaded Facing PTO - Captive Massey Ferguson 14-1346 350 50 23 Rigid 16 Button Main - Loose Massey Ferguson 14-1347 350 51 23 Rigid 16 Button Main - Loose Massey Ferguson 14-1348 330 50.7 23 Rigid 14 Button Main - Loose Massey Ferguson 14-1349 310 50.7 23 2 per machine required Springloaded 16 Button Main - Captive & Loose Massey Ferguson 14-1350 310 51 23 2 per machine required Springloaded 16 Button Main - Captive & Loose Massey Ferguson 14-1351U 319 41.5 (38.2 25 8 bolt holes - fully circular locating Arched Coilspring Unlined Torsion Damper Massey Ferguson 14-1352U 294 42.5 (39) 26 8 bolt holes 8 Springs Unlined Torsion Damper Massey Ferguson 14-1353U 347 42.5 (39) 26 8 bolt holes 8 Springs Unlined Torsion Damper Massey Ferguson 14-1354U 347 42.5 (39) 26 8 bolt holes 8 Springs Unlined Torsion Damper Massey Ferguson 14-1355U 352 42.5 (39) 26 8 bolt holes 8 Springs Unlined Torsion Damper Massey Ferguson 14-1356 230 34.9 10 Rigid Facing Main - Loose Massey Ferguson 14-1357 230 28.6 10 Rigid Facing Main - Loose Massey Ferguson 14-1358 200 32 10 2 per machine required Rigid Solid Ceramic Main - Loose Massey Ferguson 14-1359 200 34.9 10 2 per machine required Rigid 8 Button Main - Loose Massey Ferguson 14-1360 225 34.9 10 Rigid Facing Main - Loose Massey Ferguson 14-1361 300 28.6 10 junose Rigid Facing Main - Loose Massey Ferguson 14-1362 300 28.6 10 junose Rigid Solid Ceramic Main - Loose Massey Ferguson 14-1363 330 51 23 Rigid 14 Button Main - Loose Massey Ferguson 14-1364U 305 34.9 10 Rigid Unlined Torque Plate Massey Ferguson

CSI No.

Size (mm) OD

Hub Size

(mm) Major

ID

Splines (No. of Teeth)

No. of Boltholes/ Thickness/ Other Comments

Dished/ Rigid/ Springloaded

Button/ Ceramic/ Feramic/ Facing/ Paper/ Unlined

Main/ PTO/ Plate/ Torsion-dampener

Tractor Manufacturer

14-1365 210 38 19 Rigid Facing Main - Captive Same 14-1366 210 23 10 Rigid Facing PTO - Loose Same 14-1367 250 26 10 Springloaded Facing Main - Loose Same 14-1368 230 40 20 Rigid Facing PTO - Captive Same 14-1369 250 40 20 Rigid Facing Main - Captive Same 14-1370 230 25 14 Rigid Facing PTO - Loose Same 14-1371 250 40 20 Rigid Facing Main - Captive Same 14-1372 230 25 14 Rigid Facing PTO - Loose Same 14-1373 280 25 14 Springloaded Facing Main - Loose Same 14-1374 250 40 20 Rigid Facing PTO - Captive Same 14-1375 280 25 14 Springloaded Facing Main - Loose Same 14-1376 250 40 20 Rigid Facing PTO - Captive Same 14-1377 280 40 20 Rigid 8 Button Main - Captive Same 14-1378 280 25 14 triangular shaped Rigid 8 Button PTO - Loose Same 14-1379 280 40 20 Rigid Facing Main - Captive Same 14-1380 250 25 14 Rigid Facing PTO - Loose Same 14-1381 280 40 20 Rigid 10 Button Main - Captive Same 14-1382 280 40 20 Rigid 12 Button Main - Captive Lamborghini, Same 14-1383 280 25 14 Rigid 6 Button PTO - Loose Lamborghini, Same 14-1384 280 40 20 Rigid 12 Button Main - Captive Same 14-1385 250 25 14 Rigid Facing PTO - Loose Same 14-1386 280 40 24 Springloaded Facing Main - Loose Deutz, Same 14-1387 320 29 10 Rigid Facing Main - Loose Same 14-1388 250 45 22 Rigid Facing PTO - Captive Same 14-1389 290 29 10 Rigid Facing Main - Loose Same 14-1390 330 40 24 Springloaded Facing Main - Loose Lamborghini, Same 14-1391 330 40 24 Springloaded 12 Button Main - Loose Lamborghini, Same 14-1392 330 50 24 Springloaded Facing Main - Loose Same 14-1393 350 50 24 Rigid 12 Button Main - Captive Same 14-1394 350 32 17 Rigid Facing PTO - Loose Same 14-1395U 263 49.6 (46) 24 12 bolt holes 6 Springs Unlined Torsion Damper Deutz, Lamborghini, Same 14-1396 350 50 24 Rigid 12 Button Main - Loose Same 14-1397 350 50 24 Rigid 14 Button Main - Loose Same 14-1398 300 38 23 8 Springs 8 Button Torsion Damper Allis Chalmers 14-1399 300 35 20 Springloaded 8 Button Main - Loose Allis Chalmers, Moline – Minneapolis – AGCO 14-1400 300 44.5 26 2 per machine required 8 Springs 8 Button Torsion Damper Allis Chalmers 14-1401 215 25 13 Rigid Facing Main - Loose Kubota 14-1402 215 35 19 Rigid Facing PTO - Captive Allis Chalmers, Deutz Allis, Kubota 14-1403 215 24 10 Springloaded Facing Main - Loose Kubota 14-1404 225 25 13 Rigid Facing Main - Loose Kubota 14-1405 215 35 19 Rigid Facing PTO - Captive Kubota 14-1406 280 40 14 Springloaded Facing Main - Captive Kubota 14-1407 280 25.4 10 Rigid Facing PTO - Loose Kubota 14-1408 280 26 10 Rigid 12 Button Main - Loose Ford 14-1409 225 26 10 Rigid Facing Main - Loose Leyland (Nuffield) 14-1410 280 28.6 10 Rigid Facing Main - Loose Leyland (Nuffield)

CSI No.

Size (mm) OD

Hub Size

(mm) Major

ID

Splines (No. of Teeth)

No. of Boltholes/ Thickness/ Other Comments

Dished/ Rigid/ Springloaded

Button/ Ceramic/ Feramic/ Facing/ Paper/ Unlined

Main/ PTO/ Plate/ Torsion-dampener

Tractor Manufacturer

14-1411 280 44.5 10 Rigid Facing PTO - Captive Leyland (Nuffield) 14-1412 280 28.6 10 Rigid Facing Main - Loose Leyland (Nuffield) 14-1413 280 28.6 10 Springloaded 12 Button Main - Loose Leyland (Nuffield) 14-1414 230 34.9 10 Rigid Facing Main - Loose Leyland (Nuffield) 14-1415 280 34.9 10 Rigid Facing Main - Loose Leyland (Nuffield) 14-1416 330 34.9 10 Rigid 8 Button Main - Loose Leyland (Nuffield) 14-1417 310 28.6 10 Rigid Facing Main - Loose Leyland (Nuffield) 14-1418 300 44.5 10 Springs Dished Facing PTO - Captive Leyland (Nuffield) 14-1419 280 32 10 Springloaded 12 Button Main - Loose MB Trac (Mercedes) 14-1420 310 32 10 Springloaded Facing Main - Loose MB Trac (Mercedes) 14-1421 295 32 10 Springloaded Facing Main - Loose MB Trac (Mercedes) 14-1422 280 50 24 Rigid Facing PTO - Captive MB Trac (Mercedes) 14-1423 330 32 10 Springloaded 12 Button Main - Loose MB Trac (Mercedes) 14-1424 310 50 24 Rigid 10 Button PTO - Captive MB Trac (Mercedes) 14-1425 280 32 10 flywheel side Springloaded 12 Button Main - Captive Or Loose MB Trac (Mercedes) 14-1426 280 50 24 gearbox side Rigid Dished 8 Button PTO - Captive MB Trac (Mercedes) 14-1427 280 50 24 gearbox side Rigid Facing PTO - Captive MB Trac (Mercedes) 14-1428 330 40 20 Springloaded 12 Button Main - Loose MB Trac (Mercedes) 14-1429 310 40 20 Springloaded Facing Main - Loose MB Trac (Mercedes) 14-1430 350 40 20 Springloaded Facing Main - Loose MB Trac (Mercedes) 14-1431 350 40 20 Springloaded 14 Button Main - Loose MB Trac (Mercedes) 14-1432 330 50 24 Rigid 12 Button PTO - Captive MB Trac (Mercedes) 14-1433 330 40 20 Springloaded Facing Main - Loose MB Trac (Mercedes) 14-1434 360 40 20 Springloaded 12 Button Main - Loose MB Trac (Mercedes) 14-1435 225 32 10 Springloaded Facing Main - Loose MB Trac (Mercedes) 14-1436 250 - - - - Main - Loose MB Trac (Mercedes) 14-1437 380 50.8 10 Springloaded Facing Main - Loose - 14-1438 305 38.1 10 Springloaded Facing Main - Loose Pillman 14-1439 330 30 16 Springloaded 12 Button Main - Loose Renault 14-1440 330 30 16 Springloaded Facing Main - Loose Renault 14-1441 330 50 18 Rigid Facing PTO - Captive Renault 14-1442 330 44.5 27 Springloaded 12 Button Main - Loose White Oliver 14-1443 225 25 13 Rigid Facing Main - Loose Yanmar 14-1444 225 35 19 Springloaded Facing Main - Loose Yanmar 14-1445 225 25 13 Springloaded Facing Main - Loose Yanmar 14-1446 350 35 22 Rigid Facing Main - Loose Zahow 14-1447 350 35 22 Rigid 12 Button Main - Loose Zahow 14-1448 380 45 22 Rigid Facing Main - Loose Zahow 14-1449 380 35 22 Rigid 12 Button Main - Loose Zahow 14-1450 330 38.1 10 Rigid Facing Main - Loose Volvo 14-1451 380 38.1 10 Rigid 14 Button Main - Loose Volvo 14-1452 330 45 22 Springloaded Facing Main - Loose Valmet (Valtra) 14-1453 330 45 22 Rigid 10 Button Main - Loose Valmet (Valtra) 14-1454 350 38.1 10 Rigid Facing Main - Loose Valmet (Valtra) 14-1455 350 38.1 10 Rigid 12 Button Main - Loose Valmet (Valtra) 14-1456 350 45 22 Rigid 12 Button Main - Captive Valmet (Valtra)

CSI No.

Size (mm) OD

Hub Size

(mm) Major

ID

Splines (No. of Teeth)

No. of Boltholes/ Thickness/ Other Comments

Dished/ Rigid/ Springloaded

Button/ Ceramic/ Feramic/ Facing/ Paper/ Unlined

Main/ PTO/ Plate/ Torsion-dampener

Tractor Manufacturer

14-1457 350 38.1 10 Rigid Facing PTO - Loose Valmet (Valtra) 14-1458 295 45 22 Springloaded Facing Main - Captive Valmet (Valtra) 14-1459 280 25 18 compressed thickness: 6.6mm Rigid Facing PTO - Loose Valmet (Valtra) 14-1460 310 45 22 Springloaded Facing Main - Captive Valmet (Valtra) 14-1461 310 28.6 10 Rigid Facing PTO - Loose Valmet (Valtra) 14-1462 350 45 22 Springloaded Facing Main - Loose Valmet (Valtra) 14-1463 330 45 22 Springloaded Facing Main - Loose Valmet (Valtra) 14-1464 330 45 22 Rigid Facing Main - Loose Valmet (Valtra) 14-1465 230 26 10 Rigid Facing Main - Loose Benford Dumpers, Winget Dumpers 14-1466 280 42 21 Rigid Facing Main - Loose Claas 14-1467 310 42 21 Rigid Facing Main - Loose Claas 14-1468 250 42 21 Rigid Facing Main - Loose Claas 14-1469 250 42 8 Rigid Facing Main - Loose Claas 14-1470 280 29 10 flywheel side Rigid Facing Main - Captive Fendt 14-1471 250 50 8 gearbox side Rigid Facing PTO - Captive Fendt 14-1472 280 29 10 Rigid Facing Main - Loose Fendt 14-1473 280 50 8 Rigid Facing PTO - Captive Fendt 14-1474 380 44.5 10 compressed thickness: 12mm Rigid Solid Ceramic Main - Loose Galion 14-1475 405 44.5 10 compressed thickness: 12mm Rigid Solid Ceramic Main - Loose Galion 14-1476 350 44.5 10 gearbox side - oil-immersed Rigid Paper Facing Main - Loose Galion 14-1477 350 44.5 10 flywheel side - oil-immersed Rigid Paper Facing Main - Loose Galion 14-1478 368 224 53 3 per machine required - oil-immersed Rigid Paper Facing Paperfaced Disc Galion 14-1479 395 248 89 2 per machine required - oil-immersed Rigid Unlined Steel Plate Galion 14-1480 280 28.58 10 Springloaded Facing Main - Loose Mahindra 14-1481 230 44.5 10 Rigid Facing PTO - Captive Mahindra 14-1482 280 34.9 10 Rigid 12 Button Main - Loose Poclain, Sambron 14-1483 250 34.9 10 Rigid Facing Main - Loose Poclain 14-1484 280 28.6 10 Springloaded 12 Button Main - Loose Case International 14-1485 350 34.9 10 Rigid Facing Main - Loose Clayson 14-1486 250 34.9 10 Rigid Facing Main - Loose Clayson 14-1487 330 34.9 10 Rigid Facing Main - Loose Clayson 14-1488 200 23 14 Springloaded Facing Main - Loose Dong Feng 14-1489 330 34.9 10 compressed thickness: 9mm - paddles Rigid 8 Button Main - Loose JC Bamford (JCB) 14-1490U 260 52 12 8 bolt holes 12 Springs Unlined Torsion Damper Terex 14-1491 330 38.1 10 Rigid 12 Button Main - Loose Timberjack 14-1492 310 35 10 Rigid Facing Main - Loose Steyr 14-1493 280 35 10 Rigid Facing Main - Loose Steyr 14-1494 295 32 17 Rigid Facing Main - Loose Steyr 14-1495 280 50 24 Rigid Facing PTO - Captive Steyr 14-1496 310 32 17 Rigid Facing Main - Loose Massey Ferguson, Steyr 14-1497 310 50 24 Rigid Facing PTO - Captive Steyr 14-1498 350 35 10 Springloaded Facing Main - Loose Steyr 14-1499 220 35 10 Rigid Facing Main - Loose Ditch Witch 14-1500 280 35 10 Rigid Facing Main - Loose Ditch Witch 14-1501 215 26 10 Rigid Facing Main - Loose Ditch Witch 14-1502 220 26 10 Rigid Facing Main - Loose Ditch Witch

CSI No.

Size (mm) OD

Hub Size

(mm) Major

ID

Splines (No. of Teeth)

No. of Boltholes/ Thickness/ Other Comments

Dished/ Rigid/ Springloaded

Button/ Ceramic/ Feramic/ Facing/ Paper/ Unlined

Main/ PTO/ Plate/ Torsion-dampener

Tractor Manufacturer

14-1503 180 28.6 10 Rigid Facing Main - Loose Sambron 14-1504U 290 32 14 Springloaded Unlined Torsion Damper Sambron 14-1505 330 48 23 Rigid Facing Main - Captive Landini 14-1506 280 35 18 compressed thickness: 10.2-10.8mm Springloaded Facing Main - Captive Fiat, New Holland 14-1507 280 22 13 compressed thickness: 7.4-7.8mm Rigid Facing PTO - Loose Fiat, New Holland 14-1508U 180 55 26 4 bolt holes - square shaped Rigid Unlined PTO Hub Deutz 14-1509U 219.5 55 26 6 bolt holes - 6 fin star shaped Rigid Unlined PTO Hub Deutz 14-1510 380 82.5 16 2 per machine required Rigid Facing Main - Loose Galion 14-1511 350 50.8 10 Rigid Button Main - Loose Ford 14-1512 350 41.3 25 Rigid 18 Button Main - Loose Ford 14-1513 tba - - - - - - 14-1514 330 32 11 Rigid Facing PTO - Loose Fiat 14-1515 310 32 11 compressed thickness: 9.3mm Rigid Facing PTO - Loose Fiat 14-1516 200 21 12 Springloaded Facing Main - Loose Mitsubishi 14-1517 280 35.6 19 Springloaded 12 Button Main - Captive (Luk) John Deere 14-1518 280 25.5 13 compressed thickness: 7.6mm Rigid 8 Button PTO - Loose (Luk) John Deere 14-1519U tba - - - - Torsion Damper - 14-1520U tba - - - - Torsion Damper - 14-1521 250 20 10 Rigid Facing PTO - Loose - 14-1522 330 32.27 19 facings are bonded to the carrier plate Springloaded Facing Main - Loose John Deere 14-1523 280 41.3 25 Rigid Button Main - Loose - 14-1524 360 52.5 10 - - - - 14-1525 310 45 16 Rigid Facing Main - Captive Fiat 14-1526U tba - - - - Torsion Damper - 14-1527 280 27 16 Rigid Facing Main - Loose John Deere 14-1528U 354 45 (41) 13 6 bolt holes Arched Coilspring Unlined Torsion Damper Case International, McCormick 14-1529 350 44.5 10 6 paddles Rigid 12 Button Main - Loose Ford, New Holland 14-1530U 240 40 (35) 14 9 rivet holes 6 Springs Unlined Transmission Damper Case International, Fiat, Ford, New Holland 14-1531 350 70 34 Rigid 14 Button Main - Loose Deutz 14-1532U 262 40 (35) 14 6 bolt holes 6 Springs Unlined Torsion Damper Case International, New Holland 14-1533 184 19 10 Springloaded Facing Main - Loose Hinomoto 14-1534 184 19 14 Springloaded Facing Main - Loose Kubota 14-1535 327 32 10 Springloaded 12 Button Main - Loose John Deere 14-1536 310 28.58 10 Springloaded 14 Button Main - Loose Case International, McCormick 14-1537U 350 60 18 Springloaded Unlined Torsion Damper - 14-1538 300 42 8 Rigid 12 Button Main - Captive - 14-1539 310 40 24 Springloaded Facing Main - Loose Deutz 14-1540 225 26 10 Rigid Facing Main - Loose - 14-1541U tba - - Springloaded Unlined Torsion Damper - 14-1542 225 30 16 Rigid Button PTO - Loose - 14-1543 310 35 16 Rigid Facing PTO - Loose Deutz 14-1544 300 29 10 Rigid 12 Button Main - Loose - 14-1545 300 32 19 Rigid Facing Main - Loose John Deere 14-1546 285 28.58 10 Rigid 12 Button Main - Loose - 14-1547 180 25 14 Rigid Facing Main - Loose Agriatrac 14-1548 330 44.5 10 compressed thickness: 10.1mm Springloaded Facing Main - Loose Ford, New Holland

CSI No.

Size (mm) OD

Hub Size

(mm) Major

ID

Splines (No. of Teeth)

No. of Boltholes/ Thickness/ Other Comments

Dished/ Rigid/ Springloaded

Button/ Ceramic/ Feramic/ Facing/ Paper/ Unlined

Main/ PTO/ Plate/ Torsion-dampener

Tractor Manufacturer

14-1549 350 32 11 Springloaded Facing Torsion Damper - 14-1550 380 57 10 Rigid Facing Main - Loose Galion 14-1551U 467 60 (55) 22 8 bolt holes 6 Springs Unlined Torsion Damper Komatsu 14-1552 280 25.5 13 compressed thickness: 12mm Rigid 8 Button PTO - Loose (Luk) John Deere 14-1553 280 40 12 Springloaded 12 Button Main - Captive John Deere 14-1554 280 22 13 compressed thickness: 7.6mm Rigid 8 Button PTO - Loose John Deere 14-1555 380 38.1 10 Springloaded Facing Main - Loose Volvo 14-1556 300 32 19 Springloaded Facing Main - Loose John Deere 14-1557 300 38.1 10 Rigid 16 Button Main - Loose Galion 14-1558 280 35 18 Rigid Facing PTO - Loose Deutz 14-1559 295 45 22 Rigid Facing Main - Captive Deutz 14-1560 184 25 10 Springloaded Facing Main - Loose Kubota 14-1561 200 25 10 Rigid Facing Main - Loose Kubota 14-1562 215 24 10 Rigid Facing Main - Loose Kubota 14-1563 240 24 10 Rigid Facing PTO - Loose Kubota 14-1564 260 35 19 Rigid Facing Main - Loose Kubota 14-1565 275 40 14 Springloaded Facing Main - Captive Kubota 14-1566 254 25 14 Rigid Facing Main - Loose Agriatrac 14-1567U 327 47.63 36 8 or 9 bolt holes (check no. of holes) 8 Springs Unlined Torsion Damper Fiat, Ford, New Holland 14-1568 190 20 17 Springloaded Facing Main - Loose Holder 14-1569 280 25.4 10 Rigid Button PTO - Loose - 14-1570 280 22 13 compressed thickness: 12mm Rigid 8 Button PTO - Loose John Deere 14-1571 328 49.4 24 flywheel side Rigid 8 Button Main - Loose Massey Ferguson 14-1572 328 49.4 24 gearbox side Rigid Dished 8 Button Main - Captive Massey Ferguson 14-1573U 315 38.1 10 8 bolt holes - bolt circle = 295.3mm Springloaded Unlined Torsion Damper Torsion Dampers 14-1574 300 45 17 Rigid Dished Solid Ceramic Main - Captive David Brown 14-1575 305 28.8 10 Rigid Facing PTO - Loose David Brown 14-1576 280 25 14 Rigid Facing Main - Loose Same 14-1577 330 38.1 10 Springloaded 8 Button Main - Loose Timberjack 14-1578 215 32 10 Rigid Facing Main - Loose Laverda 14-1579 430 50 24 Springloaded Facing Main - Loose Agco-Maxion 14-1580U 225 34.93 21 6 bolt holes - bolt circle = 177.8mm 10 Springs Unlined Hydrostatic Drive Plate Case International 14-1581 330 45 16 Springloaded 10 Button Main - Captive Renault 14-1582 310 25 13 Rigid 8 Button PTO - Loose Claas, Renault 14-1583U 350 74 22 Springloaded Unlined Torsion Damper Hitachi 14-1584 330 45 16 Springloaded Button Main - Captive Fiat 14-1585 310 45 16 Springloaded 16 Button Main - Captive Claas, Renault 14-1586 280 25 13 Rigid 8 Button PTO - Loose Renault 14-1587 310 25 13 Rigid Facing PTO - Loose Claas, Renault 14-1588 310 25 13 Rigid Facing PTO - Loose Renault 14-1589 215 20 10 Springloaded Facing Main - Loose Allis Chalmers, Deutz Allis 14-1590 362 44.5 10 Springloaded Facing Main - Loose Bell 14-1591U 400 68 10 8 bolt holes 8 Springs Unlined Torsion Damper Torsion Dampers 14-1592U tba 41.28 10 3 rivet holes Rigid Unlined PTO Hub - Captive Case International, McCormick 14-1593 330 45 22 Rigid 8 Button Main - Captive Agco Allis, Fiat 14-1594 330 45 22 Rigid 8 Button Main - Loose Agco Allis

CSI No.

Size (mm) OD

Hub Size

(mm) Major

ID

Splines (No. of Teeth)

No. of Boltholes/ Thickness/ Other Comments

Dished/ Rigid/ Springloaded

Button/ Ceramic/ Feramic/ Facing/ Paper/ Unlined

Main/ PTO/ Plate/ Torsion-dampener

Tractor Manufacturer

14-1595 329 29.2 21 Rigid Button Main - Loose Massey Ferguson 14-1596 329 29.2 21 Rigid Button Main - Loose - 14-1597 330 44.5 10 Springloaded Facing Main - Loose Ford, New Holland 14-1598 251 41.4 25 Rigid Facing PTO - Captive Massey Ferguson 14-1599 329 29.2 21 Rigid Facing Main - Loose Massey Ferguson 14-1600U 241 41.3 25 3 bolt holes Rigid Unlined PTO Hub - Loose Massey Ferguson 14-1601 350 52.5 24 Springloaded 16 Button Main - Loose Landini 14-1602U 470 70.5 22 16 bolt holes - bolt circle = 444mm 9 Springs Unlined Torsion Damper Liebherr 14-1603 275 35 14 Springloaded Facing Main - Loose Kubota 14-1604 375 50.8 15 Rigid Solid Ceramic Main - Loose Case International 14-1605 280 48 29 Rigid Facing PTO - Captive John Deere 14-1606U 312 45 13 8 bolt holes 8 Springs Unlined Torsion Damper Machines 14-1607 410 44.5 10 Springloaded Facing Main - Loose Galion 14-1608 350 44.5 10 7 paddle Springloaded 14 Button Main - Loose Ford, New Holland 14-1609U 347 45 22 12 bolt holes 9 Springs Unlined Torsion Damper Case International 14-1610 225 44.5 27 Rigid Facing Main John Deere 14-1611 200 35 16 Rigid Facing Main - Captive Foton 14-1612 275 40 14 Springloaded 12 Button Main - Captive Kubota 14-1613 200 35 16 Rigid Facing Main - Captive Foton 14-1614 200 35 16 Rigid Button Main - Captive Foton 14-1615 350 34.9 10 6 paddle Springloaded 12 Button Main - Loose Mining Applications 14-1616 320 35 12 7 paddle Springloaded 14 Button Main - Loose Belarus 14-1617 320 35 12 Springloaded Facing Main - Loose Belarus 14-1618U 264 50(44) 16 16 bolt holes 6 Springs Unlined Torsion Damper Belarus 14-1619 342 50 24 12 paddle Rigid 24 Button Main - Loose Agco-Maxion 14-1620 260 - - - - Main - Loose Allis Chalmers 14-1621 362 35 14 Springloaded Facing Main - Loose Bell 14-1622U 278.4 30.2 11 6 bolt holes - bolt circle = 260.35mm 10 Springs Unlined Torsion Damper Case International 14-1623U 116 25(22) 10 7 bolt holes 4 Springs Unlined Front PTO Case International 14-1624 310 45 16 Rigid 12 Button Main - Captive Case International, New Holland 14-1625 310 25.4 10 Rigid Facing PTO - Loose Case International, New Holland 14-1626 310 45 16 Rigid 12 Button Main - Captive Case International, New Holland 14-1627 310 25.4 10 Rigid Facing PTO - Loose Case International, New Holland 14-1628 350 45 16 Springloaded 12 Button Main - Loose Case International, New Holland 14-1629U 262 35(31) 16 6 bolt holes 6 Springs Unlined Torsion Damper Case International, New Holland 14-1630U 348 35(31) 16 8 bolt holes - 4 locating lugs 8 Springs Unlined Torsion Damper Case International, New Holland 14-1631 280 48 23 Springloaded 12 Button Main - Captive Case International 14-1632 280 30 16 Rigid Facing PTO - Loose Case International 14-1633 315 89 16 with oilslinger Rigid Facing Main - Loose Caterpillar 14-1634U 348 42.5(39) 26 8 bolt holes Arched Coilspring Unlined Torsion Damper Claas 14-1635U 352 42.5(39) 26 8 bolt holes 8 Springs Unlined Torsion Damper Claas 14-1636U tba - - 4 bolt holes 4 Springs Unlined Front PTO Claas 14-1637U 347 42.5(39) 26 12 bolt holes 8 Springs Unlined Torsion Damper Claas 14-1638U 347 42.5(39) 26 12 bolt holes 8 Springs Unlined Torsion Damper Claas 14-1639U 347 42.5(39) 26 8 bolt holes Arched Coilspring Unlined Torsion Damper Claas 14-1640U tba - - 4 bolt holes 4 Springs Unlined Front PTO Claas

CSI No.

Size (mm) OD

Hub Size

(mm) Major

ID

Splines (No. of Teeth)

No. of Boltholes/ Thickness/ Other Comments

Dished/ Rigid/ Springloaded

Button/ Ceramic/ Feramic/ Facing/ Paper/ Unlined

Main/ PTO/ Plate/ Torsion-dampener

Tractor Manufacturer

14-1641 327 45 16 Springloaded Facing Main - Captive Claas 14-1642 280 25 13 Rigid 8 Button PTO - Loose Claas 14-1643U 230 45(40) 16 9 rivet holes 6 Springs Unlined Transmission Damper Claas 14-1644 280 40 12 Springloaded 8 Button Main - Captive Claas, John Deere 14-1645 280 22 13 Rigid 6 Button PTO - Loose Claas, John Deere 14-1646 280 22 13 Rigid 6 Button PTO - Loose Claas, John Deere 14-1647 280 40 12 Springloaded 12 Button Main - Captive Claas, John Deere 14-1648 280 22 13 compressed thickness: 7.6mm Rigid 8 Button PTO - Loose Claas, John Deere 14-1649U 230 40(34) 12 9 rivet holes 6 Springs Unlined Transmission Damper Claas, John Deere 14-1650 350 50 24 Rigid 14 Button Main - Loose Deutz, Same 14-1651 350 40 24 Springloaded Facing Main - Loose Deutz 14-1652 350 40 24 Rigid Button Main - Loose Deutz 14-1653U tba 35 26 Springloaded Unlined Torsion Damper Farmtrac 14-1654 280 29 10 Springloaded Facing Main - Loose Farmtrac 14-1655 305 29 10 flywheel side Rigid 12 Button Main - Captive Farmtrac 14-1656 305 29 10 flywheel side Rigid Facing Main - Captive Farmtrac 14-1657 280 48 29 gearbox side Rigid Facing PTO - Captive Farmtrac 14-1658 310 40 14 Springloaded Facing Main - Captive Farmtrac 14-1659 310 21.8 13 Rigid Facing PTO - Loose Farmtrac 14-1660 310 40 14 Springloaded 12 Button Main - Captive Farmtrac 14-1661 310 21.8 13 Rigid Facing PTO - Loose Farmtrac 14-1662 250 32 10 Rigid Facing Main - Loose Fendt 14-1663 250 40 20 Rigid Facing PTO - Captive Fendt 14-1664 200 25.4 13 Rigid Facing PTO - Loose Foton 14-1665 250 48 18 Rigid Button Main - Captive Foton 14-1666 250 25 15 Rigid Facing PTO - Loose Foton 14-1667 295 39 18 Rigid Facing Main - Loose Foton 14-1668 241.2 44.5 26 Rigid Facing PTO - Captive John Deere 14-1669 300 32 19 Springloaded Button Main - Loose John Deere 14-1670 330 34.9 21 Springloaded 12 Button Main - Loose John Deere 14-1671 375 34.9 21 Rigid Facing Main - Loose John Deere 14-1672 305 52.39 32 Rigid Facing PTO - Captive John Deere 14-1673 280 35.5 19 Springloaded 8 Button Main - Captive John Deere 14-1674 280 25.4 13 Rigid 6 Button PTO - Loose John Deere 14-1675 280 25.4 13 compressed thickness: 7.6mm Rigid 8 Button PTO - Loose (Luk) John Deere 14-1676U 230 40(34) 12 18 rivet holes 6 Springs Unlined Transmission Damper John Deere 14-1677 280 25.4 13 compressed thickness: 7.6mm Rigid 6 Button PTO - Loose John Deere 14-1678 280 35.5 19 Springloaded 6 Button Main - Captive John Deere 14-1679 280 25.5 13 compressed thickness: 7.6mm Rigid 8 Button PTO - Loose (Luk) John Deere 14-1680U 230 38.4(35) 24 12 rivet holes 6 Springs Unlined Transmission Damper John Deere 14-1681U 325 38.4(35) 24 6 rivet holes Arched Coilspring Unlined Torsion Damper John Deere 14-1682 280 35.5 19 Springloaded 12 Button Main - Captive John Deere 14-1683 280 25.5 13 Rigid 8 Button PTO - Loose John Deere 14-1684 342.9 34.9 21 2 per machine required Rigid 12 Button Main - Loose John Deere 14-1685U 90 35(32) 8 8 bolt holes 12 Springs Unlined Front PTO John Deere 14-1686 310 42.5 26 Springloaded 16 Button Main - Captive John Deere

CSI No.

Size (mm) OD

Hub Size

(mm) Major

ID

Splines (No. of Teeth)

No. of Boltholes/ Thickness/ Other Comments

Dished/ Rigid/ Springloaded

Button/ Ceramic/ Feramic/ Facing/ Paper/ Unlined

Main/ PTO/ Plate/ Torsion-dampener

Tractor Manufacturer

14-1687 310 27.2 20 Rigid 10 Button PTO - Loose John Deere 14-1688 200 25 10 Springloaded Facing Main - Loose Kubota 14-1689 241.3 25 13 Springloaded Facing Main - Loose Kubota 14-1690 225 25 13 Springloaded Facing Main - Loose Kubota 14-1691 298.45 40 14 Springloaded 12 Button Main - Loose Kubota 14-1692 350 45 21 Springloaded 12 Button Main - Loose Lamborghini, Same 14-1693 280 35.8 10 Rigid Facing Main - Loose Laverda 14-1694 300 29 21 Rigid Dished Facing Main - Loose Massey Ferguson 14-1695 228 40 22 Rigid Facing Main - Captive Massey Ferguson 14-1696 228 20 10 Rigid Facing Main - Loose Massey Ferguson 14-1697 280 40 24 Springloaded Facing Main - Loose Massey Ferguson 14-1698 310 40 24 Springloaded Facing Main - Loose Massey Ferguson 14-1699 330 51 23 Springloaded 16 Button Main - Loose Massey Ferguson 14-1700U 133 28(26) 21 6 bolt holes 6 Springs Unlined Torsion Damper Massey Ferguson 14-1701U 294 42.5(39) 26 8 bolt holes 8 Springs Unlined Torsion Damper Massey Ferguson 14-1702U 360 35 10 Springloaded Unlined Torsion Damper Massey Ferguson 14-1703U 348 42.5(39) 26 8 bolt holes Arched Coilspring Unlined Torsion Damper Massey Ferguson 14-1704 280 40 14 Springloaded 10 Button Main - Captive McCormick 14-1705U 354 45.6(38.3) 13 6 bolt holes Arched Coilspring Unlined Torsion Damper Case International, McCormick 14-1706U 354 - - 6 bolt holes Arched Coilspring Unlined Torsion Damper McCormick 14-1707U 352.4 - - 8 bolt holes 8 Springs Unlined Torsion Damper McCormick 14-1708 300 45 20 Springloaded Facing Main - Loose Moline – Minneapolis – AGCO 14-1709 350 44.5 10 Springloaded 12 Button Main - Loose New Holland 14-1710 350 44.5 10 Springloaded 14 Button Main - Loose New Holland 14-1711U 122 35(32) 8 4 bolt holes 4 Springs Unlined Front PTO New Holland 14-1712 310 30 16 Springloaded Facing Main - Loose Renault 14-1713 310 50 18 Rigid Facing PTO - Captive Renault 14-1714 310 30 16 Springloaded 16 Button Main - Loose Renault 14-1715 310 40 24 Springloaded Facing Main - Loose Same 14-1716 280 40 20 Rigid Facing Main - Captive Same 14-1717 280 40 20 Rigid Facing Main - Captive Same 14-1718 280 25 14 Rigid Facing PTO - Loose Same 14-1719 280 25 14 Rigid Facing PTO - Loose Same 14-1720 320 48 23 Springloaded Facing Main - Loose Same 14-1721 180 38 19 Rigid 12 Button Main - Captive Same 14-1722 180 20 12 Rigid Facing PTO - Loose Same 14-1723 225 38.1 19 Springloaded Facing Main - Captive Deutz, Same 14-1724 225 20 12 Rigid Facing PTO - Loose Deutz, Same 14-1725 215 38 19 Rigid Facing Main - Captive Same 14-1726 215 20 12 Rigid Facing PTO - Loose Same 14-1727 250 25 14 Springloaded Facing Main - Loose Same 14-1728 250 40 20 Rigid Facing PTO - Captive Same 14-1729 350 50 24 Rigid 14 Button Main - Loose Same 14-1730 280 25.4 8 - - Main - Loose Sonalika 14-1731 228 25.4 6 - - Main - Loose Taishan (Jinma) 14-1732U 352 45(41) 22 8 bolt holes Arched Coilspring Unlined Torsion Damper Valmet (Valtra)

CSI No.

Size (mm) OD

Hub Size

(mm) Major

ID

Splines (No. of Teeth)

No. of Boltholes/ Thickness/ Other Comments

Dished/ Rigid/ Springloaded

Button/ Ceramic/ Feramic/ Facing/ Paper/ Unlined

Main/ PTO/ Plate/ Torsion-dampener

Tractor Manufacturer

14-1733 310 28.6 10 Rigid Facing PTO - Loose Valmet (Valtra) 14-1734 295 45 22 Springloaded Facing Main - Captive Valmet (Valtra) 14-1735 280 25 18 Rigid Facing PTO - Loose Valmet (Valtra) 14-1736 295 45 22 Springloaded 14 Button Main - Captive Valmet (Valtra) 14-1737 280 40 18 Rigid Facing Main - Captive YTO 14-1738 280 - - Rigid Facing PTO - Loose YTO 14-1739 235 34.9 10 Rigid Facing Main - Loose Benford Dumpers, Winget Dumpers 14-1740 350 51 23 Rigid Facing Main - Loose Massey Ferguson 14-1741 280 48 23 Rigid 12 Button Main - Captive Case International 14-1742 280 30 16 Rigid Facing PTO - Loose Case International 14-1743 300 32 19 Springloaded Button Main - Loose John Deere 14-1744 330 41.3 25 Rigid Button Main - Loose - 14-1745 330 41.3 25 Springloaded Facing Main - Loose - 14-1746 305 41.3 25 Springloaded Button Main - Loose - 14-1747U 320 - 26 6 bolt holes 5 [5] Springs Unlined Torsion Damper Lamborghini, Same 14-1748U 328 55(50) 26 8 bolt holes Arched Coilspring Unlined Torsion Damper Deutz, Same 14-1749 310 40 24 Springloaded 12 Button Main - Loose Same 14-1750 330 40 24 Springloaded 10 Button Main - Loose Same 14-1751 350 40 24 Springloaded 12 Button Main - Loose Same 14-1752U 348 35(31) 16 8 bolt holes 8 Springs Unlined Torsion Damper Case International, New Holland 14-1753 310 28.58 10 Springloaded Facing Main - Loose Manitou 14-1754 330 41 24 with SAE spline Springloaded Facing Main - Loose Deutz 14-1755U 328 45(41) 21 8 bolt holes Arched Coilspring Unlined Torsion Damper Deutz 14-1756U 264 35(31) 16 6 bolt holes 6 [4] Springs Unlined Torsion Damper Deutz 14-1757U 373 35(31) 16 8 bolt holes Arched Coilspring Unlined Torsion Damper Deutz 14-1758 250 29 10 flywheel side Rigid Facing Main - Captive Fendt 14-1759 230 50 8 gearbox side Rigid Facing PTO - Captive Fendt 14-1760 215 20 10 Rigid Facing Main - Loose Kubota 14-1761U 262 35(31) 16 6 bolt holes 6 Springs Unlined Torsion Damper Landini 14-1762U 354 32 - 6 bolt holes 10 Springs Unlined Torsion Damper OEM Case International 14-1763U 354 32 - 6 bolt holes 10 Springs Unlined Torsion Damper OEM Case International 14-1764U 294 41.5 (38.2 25 8 bolt holes 8 Springs Unlined Torsion Damper Massey Ferguson 14-1765U 320 41.5 (38.2 25 8 bolt holes - 4 locating lugs Arched Coilspring Unlined Torsion Damper Massey Ferguson 14-1766U 314 40 24 8 bolt holes Rigid Unlined Torsion Damper John Deere 14-1767 380 57.15 10 Rigid Solid Ceramic Main - Loose Wabco (Div. Of Adams) 14-1768 300 42.86 26 2 per machine required 8 Springs 8 Button Torsion Damper Allis Chalmers 14-1769 250 32 10 Rigid 12 Button Main - Loose Case International 14-1770 305 28.58 10 oil-immersed Rigid Paper Facing Main - Loose Clark 14-1771 305 28.58 10 Rigid Facing Main - Loose Clark 14-1772 280 25.8 15 Rigid 10 Button Main - Loose John Deere 14-1773 305 32 10 compressed thickness: 8mm Rigid 10 Button Main - Loose John Deere 14-1774 305 31.75 19 facings are bonded to the carrier plate Springloaded Facing Main - Loose John Deere 14-1775 300 32 19 Rigid Solid Ceramic Main - Loose John Deere 14-1776 375 34.9 21 Rigid 12 Button Main - Loose John Deere 14-1777 184 20 10 Springloaded Facing Main - Loose Kubota 14-1778 230 28.6 10 Rigid 8 Button Main - Loose Massey Ferguson

CSI No.

Size (mm) OD

Hub Size

(mm) Major

ID

Splines (No. of Teeth)

No. of Boltholes/ Thickness/ Other Comments

Dished/ Rigid/ Springloaded

Button/ Ceramic/ Feramic/ Facing/ Paper/ Unlined

Main/ PTO/ Plate/ Torsion-dampener

Tractor Manufacturer

14-1779 184 25 13 Springloaded Facing Main - Loose Mitsubishi 14-1780 225 35 19 Springloaded 12 Button Main - Captive Mitsubishi 14-1781 225 35 19 Rigid Facing Main - Captive Mitsubishi 14-1782 225 25 13 Rigid Facing PTO - Loose Mitsubishi 14-1783 330 34.9 10 Rigid 12 Button Main - Loose Timberjack 14-1784 310 28 18 Rigid Facing Main - Loose John Deere 14-1785U 354 - - 6 bolt holes 8 Springs Unlined Torsion Damper Case International 14-1786 280 31.75 10 Springloaded Facing Main - Loose Case International 14-1787 280 28.58 10 Springloaded Facing Main - Loose Case International 14-1788 260 22.2 10 Rigid Facing Main - Loose Aula Dumpers 14-1789 241 26 10 Springloaded Facing Main - Loose New Holland 14-1790 241 26 10 Rigid Facing Main - Loose New Holland 14-1791 350 52.5 24 7 paddle Springloaded 14 Button Main Foton 14-1792 350 30 16 Rigid 8 Button PTO Foton 14-1793 tba - - Springloaded Button Main New Holland 14-1794 tba - - Springloaded Button Main - Loose - 14-1795U tba - - Springloaded Unlined Torsion Damper New Holland 14-1796U tba - - Springloaded Unlined Torsion Damper New Holland 14-1797U tba - - Springloaded Unlined Torsion Damper New Holland 14-1798 180 25 14 Springloaded Facing Main - Loose - 14-1799 330 50 18 Rigid Button PTO - Captive - 14-1800U tba - - Springloaded Unlined Torsion Damper New Holland 14-1801 184 20.5 18 Springloaded Facing Main - Loose Ford 14-1802 295 44.5 10 - - Main - Loose Atlas 14-1803 330 48 23 Springloaded Facing Main - Captive - 14-1804 315 29 10 Rigid Facing Main - Loose Foton 14-1805 275 44.5 10 Rigid Facing PTO - Captive Foton 14-1806 280 40 14 4 paddle Springloaded 8 Button Main - Loose New Holland 61033-14 432 50.8 10 Rigid Facing Main - Loose Terex 61042-14 400 50.8 10 Rigid Facing Main - Loose Galion 61047A-14 350 44.5 10 gearbox side - oil-immersed Rigid Paper Facing Main - Loose - 61047B-14 350 44.5 10 flywheel side - oil-immersed Rigid Paper Facing Main - Loose - 61051-14 230 44.5 10 Rigid Facing PTO - Captive Case International, Massey Ferguson, TFA 61052-14 250 44.5 10 Rigid Facing PTO - Captive Foton, Massey Ferguson 61053-14 280 28.6 10 Rigid Dished Facing Main - Loose Massey Ferguson, TFA 61054-14 300 28.6 10 Rigid Dished Facing Main - Loose Massey Ferguson, Tafe, Ursus 61057-14 305 41.3 25 Rigid Facing Main - Loose Ford 61057/01-1 305 41.3 25 Rigid 12 Button Main - Loose - 61059-14 330 41.3 25 compressed thickness: 10.1mm Rigid Facing Main - Loose Ford 61059/01-1 330 41.3 25 compressed thickness: 8.7mm Rigid Facing Main - Loose - 61068-14 280 25.4 15 flywheel side Rigid Facing Main - Captive Or Loose Ford 61071-14 280 26 10 Rigid Facing Main - Loose Ford 61073-14 330 26 10 Rigid Facing Main - Loose Ford, New Holland 61074-14 305 44.5 10 Rigid Facing Main - Loose Ford 61075-14 330 44.5 10 compressed thickness: 10.1mm Rigid Facing Main - Loose Ford, New Holland 61075/01-1 330 44.5 10 compressed thickness: 8.7mm Rigid Facing Main - Loose -

CSI No.

Size (mm) OD

Hub Size

(mm) Major

ID

Splines (No. of Teeth)

No. of Boltholes/ Thickness/ Other Comments

Dished/ Rigid/ Springloaded

Button/ Ceramic/ Feramic/ Facing/ Paper/ Unlined

Main/ PTO/ Plate/ Torsion-dampener

Tractor Manufacturer

61077-14 215 47.63 29 gearbox side Rigid Facing PTO - Captive Ford 61078-14 330 25.4 15 Rigid Facing Main - Loose Ford, New Holland 6117-14 180 24 19 Springloaded Facing Main - Loose Yanmar 62059-14 280 28.58 10 Rigid Facing Main - Loose Case International 62074-14 280 32 10 Springloaded Facing Main - Loose MB Trac (Mercedes) 62076-14 330 40 20 Springloaded Facing Main - Loose MB Trac (Mercedes) 62078-14 310 45 22 Rigid Facing PTO - Captive MB Trac (Mercedes) 62079-14 330 40 20 Springloaded 12 Button Main - Loose MB Trac (Mercedes) 62094-14 330 26 10 Rigid Facing Main - Loose Ford 62097-14 350 44.5 10 Springloaded 12 Button Main - Loose - 62098-14 250 41.3 25 Rigid Facing PTO - Captive Massey Ferguson, Tafe, Ursus 6210-14 200 22.2 20 Springloaded Facing Main - Loose Yanmar 6250-14 200 26 10 Rigid Facing Main - Loose Benford Dumpers, Winget Dumpers

Copyright © 2016, CSI Clutch & Brake.