Clue Machinery - November 2014 Issue

M A C H I N E R Y

NOVEMBER 2014Volume 29 Number 11Phone: 905-528-7765

Fax: 905-917-0222www.cluemachines.com

email: [email protected]

Your Production Matters To Us

PROFILE ROLLS

PLATE ROLLS

PRESS BRAKES

FIBER LASER

PUNCH PRESS

PLASMA MACHINE

SHEARS

We offer innovative solutions to increase your productivity

ONTARIO - EASTERN CANADA3980 Chadburn CrescentMississauga, ON L5L 3X4Tel: 905-820-3232Fax: 905-820-3234

WESTERN CANADAWestside Service Ltd4406-58 St. SouthLethbridge, AB T1K7E2Tel: 403-380-5047Fax: 403-380-5048

FLEXIBLE COIL PUNCHING LINES

Quality | Service | Value | www.ferricmachinery.com

Page 2 Clue November, 2014

2783 Portland Dr. Oakville ON L6H 6M6Tel: 905-829-1579Email: [email protected] Website: www.smtcl.com www.smtcl.ca

Manual Lathes Clearance Sales!

AH110 – Automatic Horizontal Boring & Milling Machine

Spindle Diameter: 4.33” Spindle RPM: 8-1100 Main Motor Power: 20hp Work Table Dimensions: 49”x43.3” X/Y/Z Axis travel: 63”/47”/55” W/U Axis travel: 23.6”/7” Max Table Load: 11000 lbs

S1-262A/3000 Hollow Spindle Lathe

Max Outer Dia. of Pipe: 13.39” Max Swing of Bed: 17.7” Spindle Bore: 13.98” Power of Main Motor: 24.75hp Centre distance: 18” Machine dimensions: 225”x78”x64”

S1-245B/1500 Hollow Spindle Lathe

Max Outer Dia. of Pipe: 15.75” Max Swing of Bed: 9.44” Spindle Bore: 24.75hp Power of Main Motor: 60” Machine dimensions: 225”x78”x64”

CA6236/1000 Manual Lathe

Max Swing Diameter over bed: 360mm Max Swing diameter over carriage: 210mm Max turning length of bed: 1000/900mm Spindle range(forward): 37-1600r/min Spindle range(reverse): 102-1570r/min Main motor power: 4kw

TPX6111C/3 Manual Boring Mill

Spindle Diameter: 4.3” Spindle RPM: 8-1100 Main Motor Power: 20hp Worktable Dimensions: 42.2”x43.3” X/Y/Z Axis Travel: 62.9”/47.2”/55” W/U Axis Travel: 23.6”/7”

Spindle Bore: 13.98” Power of Main Motor: 24.75hp Centre distance: 18” Machine dimensions: 225”x78”x64”

HTC2050 – Horizontal Turning Centre

BARON-MAX MACHINING CENTRE BARON-MAX CNC TEACH-IN LATHE

MAXIMART BEDMILL

DRILLMASTER RADIAL DRILL

HEAVY DUTY LATHES

Special Pricing - Large InventoryAll New Milling Machines - Lathes & Surface Grinders

NEW MACHINES“From Stock”

S1600 - 5’3” ArmTF1280H - 50“ ArmTF1100 - 44” ArmTF900 - 36” ArmTF 750 - 30” ArmMXB5 - 47”x 23”x 24” Travel

7-1/2HP Inverter HeadManual or with Fagor 3-Axis CNC

26” x 120” x 4” Bore - 16” Wide Bed20” x 80” x 4” BoreAlso in Stock: 14“, 16”, 18”, 20“ & 22” Swing

Special Package Includes• Fagor 2-Axis DRO• Machine Vise• Clamping Kit

40” x 26” Fagor Control 30” x 60” - 4” Bore, also 18” x 40”with Fagor CNC Control

POWERMASTER MACHINERY LTD.1048 Matheson Blvd. E. Mississauga, ON L4W 2V2

Tel: 905-624-9327 Fax: 905-624-8591e-mail: [email protected] website: www.powermaster.ca

OVER 30LATHES

IN STOCK

OVER 40MILLS

IN STOCK

2VS - 9”x49“ - R83VS - 10”x50“ - R84VS - 10”x54” - ISA40

Clue November, 2014 Page 3

BARON-MAX MACHINING CENTRE BARON-MAX CNC TEACH-IN LATHE

MAXIMART BEDMILL

DRILLMASTER RADIAL DRILL

HEAVY DUTY LATHES

Special Pricing - Large InventoryAll New Milling Machines - Lathes & Surface Grinders

NEW MACHINES“From Stock”

S1600 - 5’3” ArmTF1280H - 50“ ArmTF1100 - 44” ArmTF900 - 36” ArmTF 750 - 30” ArmMXB5 - 47”x 23”x 24” Travel

7-1/2HP Inverter HeadManual or with Fagor 3-Axis CNC

26” x 120” x 4” Bore - 16” Wide Bed20” x 80” x 4” BoreAlso in Stock: 14“, 16”, 18”, 20“ & 22” Swing

Special Package Includes• Fagor 2-Axis DRO• Machine Vise• Clamping Kit

40” x 26” Fagor Control 30” x 60” - 4” Bore, also 18” x 40”with Fagor CNC Control

POWERMASTER MACHINERY LTD.1048 Matheson Blvd. E. Mississauga, ON L4W 2V2

Tel: 905-624-9327 Fax: 905-624-8591e-mail: [email protected] website: www.powermaster.ca

OVER 30LATHES

IN STOCK

OVER 40MILLS

IN STOCK

2VS - 9”x49“ - R83VS - 10”x50“ - R84VS - 10”x54” - ISA40

Page 4 Clue November, 2014PAGE 4 CLUE, October 2014

63 Maplecrete Road, Concord, Ontario, L4K 1A5 Canada

Tel: (905) 669-7507 ! Fax: (905) 669-7512e-mail: [email protected] ! web: www.tradermachinery.com

BENDERS, HYDRAULIC2-1/2" SOCO, SB-63NCMP (2005), Hyd. Mandrel Type, Touch Screen PLC Ctl5-1/2" ENERPAC, Hyd. Pipe bender, w/asst’d tooling

BORING MILLS, CNC, HORZ, FLOOR5" GIDDINGS & LEWIS, X-36’ Y-14.7’, Mitsi S60 control

BORING MILLS, HORZ, TABLE3" MONTI, MB S-75, X-64" Y-40" Z-40", 31"x 47" table3-1/2" PBR, 37"x 47" tbl, 48" vert, 60" F-B, DRO, Mint!4" TOS, W100, 4-axis Fagor DRO (Installed 2012), 24" Facing head

BORING MILLS, CNC, HORZ, TABLE5.1" SNK, NB130 PE 3.5 (2009), Table Type, Fanuc 16iM, CTS, 60 ATC, Vert. head

Attach’s

BORING MILLS, VERT63"sw TOSHIBA, TMC-13(3), CNC, C-axis w/ Fanuc 32i78.7" TOSHIBA, TUE-20 (2001), CNC, Fanuc 18T, max Sw. 93"157.5" Sw STANKO, Dist. Under rail 108", 240 Hp, Installed as a New Mach. 1998157.5" Sw STANKO, Dist. Under rail 88.42", 168 Hp, table rebuilt 2009197" Sw GRAY, Dist. Under rail 102", 125 Hp

BRAKES, PRESS30 to 3000 Ton "NEW" ACCURPRESS Models CNC50 Ton x 4’ “NEW” ACCURPRESS, Absolute SF350-4, CNC, 18” Opening, 8” stk, 13” throat55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis70 Ton x 10’ ALLSTEEL, Hyd.75 Ton x 10’ "NEW" ACCURPRESS, CNC130 Ton x 10’ "NEW" ACCURPRESS, CNC130 Ton x 12’ ACCURPRESS, 2-Axis130 Ton x 14’ ACCURPRESS, ETS3000 (2005)200 Ton x 12’ "NEW" ACCURPRESS, CNC235 Ton x 12’ ACCURPRESS, Accell 523512 (2006), Mint!, Fully Loaded250 Ton x 12’ "NEW" ACCURPRESS, CNC300 Ton x 16’ PACIFIC, Hyd. FOPBG, Light Curts, 4-way die, Cylinders re-done300 Ton x 20’ ALLSTEEL, Hydraulic400 Ton x 20’ UNIVERSAL, Hyd, Flush floor design

DRILLS, COLUMN & BENCH1-3/8"cap "New" DRILLMASTER, Z5035, Geared Head

DRILLS, RADIAL3’ arm "New" TONE FAN, RD-9003’ Arm OOYA, 1500rpm, w/work table3’ Arm SUNLIKE, 1500rpm, w/work table9’arm SHENYANG, Box table

EDM, CONVENTIONAL NC/CNC50 Amp ARISTECH, CNC, Sinker, 25.6"x 13.8" table

GRINDERS, CYLINDRICAL5"x 13"JONES & SHIPMAN, 1212E

GRINDERS, SURFACE, RECIPROC6" x 18" "New" KENT, KGS-2006"x 18" CIM, Manual6"x 18" LIAN FENG, Manual20"x 13’ SNOW, Hydraulic

IRONWORKERS55 Ton "NEW" MAKO, Universal, 5"x 5"x 3/8" angle

LASERS2600 Watt TRUMPF, L2530 (1999), 50"x 100", Siemens 840D, Dual pallet2800 Watt BYSTRONIC, Bystar 3015-2 (1998), 5’x 10’, w/ Tube cutting attachment3000 Watt TRUMPF, L2530 (1998), 4’x 8’3000 Watt BYSTRONIC, Bystar 2512 (2002), 4’ x 10’3200 Watt TRUMPF, Lasercell, 5-Axis4000 Watt AMADA, FO3015 (2002), 5’ X 10’, w/Shuttle table5000 Watt TRUMPF, L3050 (2003), Linear laser, 5’x 10’

LATHES, ENGINE12" x 40" "New" MORTON, F1900-AEG (2001), Single Phase13"x 40" COLCHESTER, Master 2500, 5HP18" x 60" "New" POWERTURN, 46020"x 40" PROSTAR, 6250, 3 & 4 Jaw chucks, Steady & Follow40"x 120" JHS United, $-Jaw Chk, (2) Steady Rests63"X 106" BOKO, D82H, Semi-Automatic Spinning lathe

LATHES, N/C & CNCDMG MORI, Sprint 65 Siemens (2011), 2 Spdl., 3 Turret, 1,581 Spdl. Hrs.OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw, 2" Bar capMAZAK (2006), Quickturn Nexus 450-II, 33.27"sw, 80" Mach. Length

HYUNDAI KIA, SKT250SY (2010), Fanuc 18T, Live tooling, Sub Spdl.,10"ChkHARRISON, Alpha 400, 16"sw x 52"cc, Fanuc 2-1/8" bore22"x 79", WAFUM, 12" 3-Jaw Chk, steady rests, Fagor 8050TC26.8"Sw, 41.2"ctrs, GILDEMEISTER, CTX510 (2004), Fanuc 21iT, 10"chk27"Sw, 50"ctrs, GILDEMEISTER, CTX600 Linear (2002), Heidenhain iTNC, 15"chk

MACHINING CTRS, HORZTOYODA, FH100 (1989), Twin PalletMAZAK, H500/40, X-27.9" Y-18" Z-20.7", Mazatrol M32 controlMAZAK, H500/50 (1987), X-28" Y-25.6" Z-25.6"MORI SEIKI, NHX-5000 (2012), X-28.7" Y28.7" Z-34.6", Installed 2013

MACHINING CTRS, VERTDECKEL MAHO, DMU50T, 3 + 2, CNCBOSTOMATIC, BD18-1 (1999), Z-17.7" Y-11.8" Z-17.7", 10,000rpm, ATC 18, CAT 20MATSUURA, RA-2G (2000), X-26" Y-18.1" Z-19.02", YasnacLAGUN, VMC 3516 (2000), X-30" Y-16" Z-20", Dynapath Delta CNC ControlFADAL, VMC4020 (2005), X-40" Y-20" Z-20", Fanuc 18i-MB5FADAL, VMC4020FX, X-40" Y-20" Z-20", Fanuc Oi-MCOKUMA, ES V4020 (2001), X-40" Y-20" Z-20", OSP U10 Control, 40 taperCINCINNATI, Arrow 1000, X-40" Y-20" Z-22", Acramatic 2100, CTSHAAS, VF3 (2011), X-40" Y-20" Z-25", 5-Axis Rotary & Tilting, 10,000rpm, CAT 40FADAL, VMC4020, X-40" Y-20" Z-28", CNC 88HSBRIDGEPORT HARDINGE (2007), X-40" Y-24" Z-24", Fanuc 18iMBOKUMA, MC-50VA, X-41.3" Y-20" Z-22", OSP7000 Control, 50 tprOKK, MCV-560 (2000), X-41" Y-22" Z-22"

MILLS, CNC12"x 51" TOS, FV-30 (1999), Heidenhain TNC-310 ctl, 40 taperX-22" Y-20" Z-18" DECKEL, FP4

MILLS, UNIVERSAL12"x 55" CMC, FU-2, Vert/Horz, 6.5hp

MILLS, VERTICAL9"x 42" FIRST, LC 1-1/2 VS, DRO, P/F on X, Power Drawbar9" x 49" "New" MAGNUM-CUT, VM-2V, 3hp10"x 50" FIRST, LC-20VS, Fagor 2-Axis DRO, 5HP, 40 Taper10" x 54" "New" MAGNUM-CUT, VM-4V, 40 Taper, 5hp17"x 78" TOS, FA5B-V, 50 taper, 20 Hp

PRESSES, OBI80 Ton ROUSSELLE, 8B-48, 48” x 22” Bed, OBI80 Ton BROWN BOGGS, 18 LJA, A/C & Brake, 36"X 25" bed80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x 36"bed

PRESSES, STRAIGHT SIDE250 Ton BROWN BOGGS, SS2-250-72-39 (2000), 39"x 72" bed, 6"stk800 Ton BLOW, SC2-800-96-60 (1998), 96"x 60" bed, 16"stk, 20-40spm, Like

New!

PUNCHES, TURRETSTRIPPIT, FC1000R (1994), Fanuc Control

30 Ton EUROMAC, CX1250/30 (2000), CNC

ROLLS, ANGLE BENDING2"x 2"x 3/16" "NEW" TAURING, SAF DS 50HV, Hydraulic2"x 2"x 3/16" SAHINLER (2008), assorted tooling

ROLLS, PLATE BENDING, INIT. PINCH1/2"x 10’ ROUNDO (1997)

SAWS, BAND, HORIZONTAL10"x 15" "NEW" ACRA, Speeder FHBS-250V

SAWS, BAND, VERTICAL28" Throat T-JAW, 700C, w/Blade Welder & Grinder

SHEARS, POWER SQUARING3/8"x 8’ ACCURSHEAR (1998), Hydraulic

TABLES, ROTARY12-1/4" KITIGAWA, TS320R, w/Tailstock, 3-7/8"Bore

MISCELLANEOUSBarfeeder SPACESAVER, 4’ SMW, Autoload 12.65Magazine Barfeeder 4’ SAMECA, MBF1000 (1998), Auto LoadingBarfeeds LNS, Servo S2 & S3, Late models, w/Remote pendant, ExcellentHoning Machine SUNNEN, MBB-1650, Manual, Asst’d Tooling & CabinetKeyseater DAVIS, No.5, Cap. Keyway cutting 1/16" to 1-1/2"Notcher (NEW) BOSCHERT, 5/32" x 8-7/8" x 8-7/8", HydraulicSpot Welder 20 KVA, SIPMig Welder 200 Amp, LINCOLN ELECTRIC, Power Mig 2000Wet type Sander 36" TIMESAVER, No.137-IHDWire Machinery "NEW" METALEX, WT250, Wire Nibbler

NEW


WE BUY SINGLE MACHINES OR COMPLETE PLANTS

63 Maplecrete Rd.Concord, Ontario L4K 1A5Tel: (905) 669-7507Fax: (905) 669-7512www.tradermachinery.com

NEW ACCURPRESS MODELSCNC PRESS BRAKES

HYUNDAI KIA, No. SKT250SY, 2010, W/ Live tool,Sub. Spindle, 10” Chk., Fanuc 18T

MORI SEIKI, 2012, NHX5000, 28.7”X, 28.7”Y, 34.6”Z, CNC Horizontal machining Center, Mori Seiki M730 BM

41.3”X, 22.04”Y, 22.04”Z, OKK, 2000,CNC Vertical Machining Center, Fanuc 16iM

40”X, 20”Y, 25”Z, HAAS, VF3, 2011, 5-AXIS, W/HAAS TR210 TRUNNION TABLE, LOW HOURS!

See Demos on the highly successful leader in precision forming Accurpress Press Brakes.


Page 8 / Steel Marketplace / JULY 2007

�

• APPRAISALS • FINANCING • • TRADE-INS • TOOLING •

• SHIPPING • INSTALLATIONS • • TRAINING • SOFTWARE •

VISIT US AT:www.jordancraigmachinery.com

TO VIEW A COMPLETE LIST

Check out our website for Photos, Specifications and a more complete inventory atwww. jordancraigmachinery.com

JORDAN CRAIG MACHINERY INT’L LLC, P.O Box 737, New City, NY 10956Tel: 845-398-0073 [email protected]: 845-398-0074 www.jordancraigmachinery.com

2500 WATT MAZAK STX510 MKII HYBRID LASER, APPROX. 41,000HRS, MFG:2000

STOCK #10110

MAZAK 1500 WATT STX48MKII LASER, MAZATROL L32B, 43,000 HOURS, MFG:10103

STOCK #10103

242 TON X 167” AMADA HFE2204/7, PRESS BRAKE, OPERATEUR, MFG:2005

STOCK #10059

33 TON AMADA PEGA 367, TURRET PUNCH, O4PC, 60” X 72”, 44 STA., 2 A/I, MFG:1992

STOCK #9987

BYSTRONIC BYSPEED 3015, LASER, 5200 WATT, 5’ X 10’, MFG:2005, STOCK #10072

37” TIMESAVER “3100 SERIES” COMBINATION BELT/BRUSH “WET” FINISHING MACHINE,

MFG:2006 STOCK #10046

33 TON, AMADA, VIPROS III 3510 NT,TURRET PUNCH, 58 STA., 4 A/I,

MFG: 2004 STOCK #9920

33 TON, AMADA, VIPROS 358 KINGII, TURRET PUNCH, FANUC 18P, 4 A/I.MFG:1999 STOCK

#10098

88 TON, AMADA, RG80, PRESS BRAKENC 9EXII 3-AXIS,MFG:2000

STOCK #10033

2000 WATT, CINCINNATI CL-6, LASER, 5’ x 10’ DUAL PALLET,FANUC C2000,CHILLER

MFG:2000 STOCK #10019

10’ x 1/2”, ROUNDO, No. PS255, HYDRAULIC INITIAL PINCH PLATE ROLLS, MFG:1997

STOCK #9957

190 TON, TRUMPF, V170, PRESS BRAKE, DELEM, PROG. Z1,Z2, CROWNING,

CLAMPLING, MFG:2000 STOCK #10013

Clue November, 2014 Page 7Page 8 CLUE, November 2012

131 Citation Dr, Units 17 & 18VAUGHAN-CONCORDONTARIO, L4K 2R3Tel: (905) 738-8730

Fax: (905) 738-5148

e-mail: [email protected]:www.sabito.com

CNC MACHINE TOOLS * PRESS BRAKES * SHEARS * TURRET PUNCHES * BENDING ROLLS * IRONWORKERS * NOTCHERS * BENDERS

WE BUY & SELL SINGLE MACHINES OR COMPLETE PLANTS

APPRAISAL SERVICES - AMEA & USPAP CERTIFIED

BORING MILLS, HORZ, TABLE

3.14" UNION, BFT 80/2

5" G & L 450 Series MC50, Fanuc CNC

BORING MILLS, VERT

36" BULLARD, VTL

88"dia STANKO, 1525, 100"sw, 70"v, 1.6-80rpm, 2 hd

10’ dia NILES, F120, 128"sw, 24"stk, 6’rail hd trav, 50hp

BRAKES, PRESS

35T x 8’ DIACRO, 16-96, CNC BG, 9"SH, 3"adj, 9"thrt, 3hp, 220v

60T x 6' WYSONG THS60-72, Hyd, Automec 300, CNC, Light Guards

70T x 10’ NIAGARA, HD-70-8-10, 102"bh, 15"SH, 7"stk, 24"BG

75T x 10’ DIACRO, 75-10, Hydro-Mech, 3"stk, 8"adj, 12"SH, 8"thrt

90T x 10’ PACIFIC, J90-1, Hyd, 7"stk, 6"thrt, 6"SH, 2-Axis CNC, 15hp

135T x 8’ CINCI, Series 5, 102"BH, 3"stk, 5"adj, 12"SH, 8"thrt, 30spm

135T X 12' ATLANTIC HD135-12-10 Hydraulic

230T x 13' ADIRA Model QHD-20040 Hydraulic (1997)

230T x 13' ACCUPRESS Model 50235 Accell CNC (2006)

DRILLS, RADIAL

3’ Radial arm drill

6’ STANKO, 2M55, w/ Box Table

1-1/2"x 48" TECHNIDRIL, Series 200 Gundrill

GRINDERS, CYLINDRICAL

20" X 48" KARSTENS K29, Universal Cnc

GRINDERS, ROTARY

48" SHIBAURA, KRT-8D

GRINDERS, SURFACE, RECIPROC

6" x 18" BROWN & SHARP, Hydraulic

8"x 24" JAKOBSEN, Hydraulic

GRINDERS, UNIVERSAL

20"x 39" TOS, BHU 50A/1000

LATHES, ENGINE

20"x 39" PROSTAR 6250

20"x 120" VDF

GEMICO, 1760

HITACHI SEIKI, 7D, 6-1/4"hole

LATHES, N/C & CNC

GOODWAY GT-25, CNC (1999)

TAKISAWA, TS-20, CNC

WASINO, LJ-63M (1988)

OKUMA, 14.1" x 23.6" LT25 (1999), 4-Axis

VDF, DN 820, 32"x 72", CNC

VDF, V800, 42"x 72", CNC

MACHINING CTRS, HORZ

MITSUBISHI, MH-50C (1989), 158 ATC

MAZAK Integrex E-1060V/8II (2010)

MACHINING CTRS, VERT

MONARCH VMC-45 CNC (1989)

MATSUURA MC-800 VF CNC (1995)

DMG DMU 60T CNC (2002)

EUMACH, DVM-5030, Double Column CNC Center, X-20.4" Y-12.2"

Z-27", ATC-180

LEADWELL, MCV 760 XL

HERMLE, C800U (2001), 5-axis

DOOSAN, REVO 4020 (2006), CNC

MACHINING CTRS, UNIV

HURCO C-40-U, 5 AXIS CNC (2004)

MILLS, UNIVERSAL

14"x 44" HECKERT, FSS 440, V1/2

KAO-FONG, KF-G-450

HURON, NU3

MILLS, TURRET

9"x 42" KONDIA, Vertical

9"x 42" DARBERT, Vertical

9"x 49" TOS, FNK 25

9"x 49" RACER TECH, c/w Fagor DRO

9"x 49" FIRST, LC 18 VSS, Newall DRO

MILLS, VERTICAL

17 11/16" x 74 13/16" Fortworth VBM 4V (1995)

20" x 94" CINCINNATI, #5, X-50" Y-18" Z-16", #50, 14-1400rpm,

25hp

24" x 98" TOS, FC63V, X-63" Y-23.62" Z-23.62", 3-Axis Heid DRO

HAAS, MDC500, CNC, (2006), Double Pallet

PRESSES, GAP FRAME

45 Ton BLISS, C-45, HS, 29" x 19"bed, 2-1/2"stk

PRESSES, OBI

75 Ton MINSTER, No.7, c/w AC

250 Ton NIAGARA, 8"stk, 22-1/2"SH, 35"x58", 35spm, A/C

320 Ton MORI (2001), Fine Blanking Press

PRESSES, STRAIGHT SIDE

250 Ton BLISS, 12"stk, 38"SH, 6"adj, 30spm, 440v

250 Ton SMERAL, SSDC

300 Ton DANLY, SSDC, 24"stk, 39.5"SH, 20spm

300 Ton ROUSELLE, 102x48, 14"stk, 31"SH, 8"adj, 35spm

300 Ton USI CLEARING, 16"stk, 52"SH, 20"adj, 20spm, 40hp

300 Ton VERSON, 12"stk, 30"SH, 10"adj, 20spm, 60hp

350 Ton BLISS, 16"stk, 12"adj, 38-1/2SH, 30spm, 15"bolster

500 Ton BLISS, 12’stk, 40"SH, 25spm, 75hp

PUNCHES, TURRET

22.5 Ton AMADA, Virpos 2510 (2000), CNC

33 Ton AMADA, Apelio 357 (1992), 45stn, 4-Auto, Fanuc 04PC

33 Ton AMADA, Vipros 357, CNC, 58 stn, 2 Auto, Fanuc

ROLLS, ANGLE BENDING

2"x 2"x 3/16"TAURING, Alpha 40, CNC

ROLLS, PLATE BENDING

16ga x 4’ TENNSMITH, SR48P, 3"roll, Slip, 3/4hp

12ga x 4’ NIAGARA, L351P, IP, 4 Roll, Manual Adj & Drop,

10ga x 5’ WDM (2008), Initial Pinch

SAWS, BAND, HORIZONTAL

HYD-MECH, S-20 M Series 111

DO-ALL, C-916A

SAWS, BAND, VERTICAL

10" x 15" RAM, Roll-in

36" x 13 DOALL, 50-5200 ipm, Welder, Grinder

Can-Saw 115, Roll-in

SHEARS, POWER SQUARING

1/8"x 36" Mechanical

1/4" x 10' Haco Model TS 3006 Hydraulic (1990)

1/4" x 10’ VIMERCATI, SI 3006 (2004), Hydraulic

1/4" x 10’ CINCINNATI, Hyd, 36" FOPBG, v/Rake, Sq Arm, 15hp

1/4" x 10’ CINCINNATI, 2CC10, Mech, 36"FOPBG, 60spm

1/4" x 12’ NIAGARA, Hyd, 36" FOPBG, 50"sq arm, 20spm, 15hp

3/8" x 10’ CINCINNATI, 24"ROMBG, 50spm, Sq Arm, 20hp

3/8" x 10’ CINCINNATI, 1510, 42" FOPBG

3/8" x 12’ CINCINNATI, 4312, Mech, 40" FOPBG, 18"throat, 50spm, 15hp

1/2" x 10' ADIRA Model GHS-1330 Hydraulic (2005)

1/2" X 10' HACO HSLX 3013 Hyd, .39"FOPBG

1/2" x 12’ CINCINNATI, 48"digital FOPBG, 18"gap, 40spm, 20hp

1/2" x 12’ CINCINNATI, 4H12, 12’sq arm, 2 front suppts, 25hp

5/8" x 8’ CINCINNATI, Mech, 48"FOMBG, 8’sq arm, 40spm

5/8"x 8’ CINCINNATI, Mech, ROMBG

5/8" x 10’ CINCINNATI, Hyd, 36"FOPBG, 18"gap, 14spm

5/8" x 12’ CINCINNATI, Hyd, 48"FOPBG, DRO, 18"gap, Power Rake

MISCELLANEOUS

Combination Punch & High Def, W.A. WHITNEY 3400 RTC 680-850

CMM Machine ZEISS Contura G2 Aktiv (2010)

Feeder IEMCA Prodigy 547, 6ft bar length.MAG CAP

15.75"(3/16"-2")

Press H&A 60 Ton DAKE

Comparitor 30" Optical, JONES & LAMPSON, DRO

Phase Converter RONK, X6

Coil Line AIDA LFG 600R, Width 2.8"-23.6".Thick.02"-.177"

INDUSTRIAL MACHINE TOOLS & APPRAISALS

MACHINERY INC.



A U C T I O N S • L I Q U I D AT I O N S

F I N A N C I N G • A P P R A I S A L S

9 0 5 . 6 6 9 . 8 8 9 3i n f i n i t y a s s e t s . c o m

Like us at: facebook.com/Infinity-Asset-Solutions-Inc

Follow us at: twitter.com/InfinityAssets

SCHIESS Vertical Boring Mill Model 2K 300/500

ASQUITH 6" Floor Type Horizontal Boring Mill PACIFIC Press Brake Model 750-18

Swing 196.8"1 of 2 VBM’s

6" Spindle

18' x 750 Ton

1 of 2 Boring Mills

1 of 13 Lathes GEMINIS Engine Lathe Model GE-1400-S

As Appointed By TheTrustee In Bankruptcy

Lakehead Marine & Industrial Inc.Complete Shipyard Featuring Large Capacity Turning, Boring & Bending

401 Shipyard Road, Thunder Bay, Ontario, Canada

Owner Retiring HTE Tooling Inc.High Tech Tooling Manufacturer 266 Rutherford Road South, Unit 20, Brampton, Ontario

Auction: Thursday November 20, 11:00 AM (ET)Featuring: TOS SN50A Lathe, (2) SAJO Mills, (2) COOPERMATIC Oil Separation Units, Twist Drill Reamer Grinders, CINCINNATI &

BROWN & SHARPE Tool & Cutter Grinders, Surface Grinders, Machine Tool Accessories, Lockers, Pallet Racking, Office Furniture & More.

Auction: Wednesday November 12, 10:00 AM (ET)

Inspection: Tuesday November 11, 9 AM to 4 PM (Over 1,000 Lots!)

Bid Live Onsite & Online Via

Max 70.8" x 472.4"

Sale In Conjunction With


Bringing the Best Machine Tools to North America

GERMade in Spainwww.germh.com

Cylindrical Grindersup to 20’, 6 Ton between centers;up to 40” swing

Surface Grindersup to 20’ x 43” x 26” (height) grinding capacity;4.5 Ton part weight

Vertical Grindersup to 100” x 30” (height) grinding capacity;4 Ton part weight

Surface Grinders with Rotary Tableup to 60” x 20” (height) grinding capacity; 2.5 Ton part weight

Rebuilding Unique Machine Tools

Schiess VBM Rebuilt by DiPaolo160Ó table30ʼ swing110Ó part height

Toshiba HBM Rebuilt by DiPaolo6Ó spindle 100Ó “Y”30ʼ “X” 71Ó “W + Z”

7040 Fir Tree Drive, Mississauga, ON L5S1K6, CanadaToronto Office: 905-676-9265 USA Office: 412-421-1211www.dipaolocnc.com [email protected]


7040 Fir Tree Drive, Mississauga, ON L5S1K6, CanadaToronto Office: 905-676-9265 USA Office: 412-421-1211www.dipaolocnc.com [email protected]

USED MACHINERY

OTHER SERVICES» On-Site spindle taper grinding» Machine tool calibration and metrology» Mechanical, Electrical and CNC field service» Installations and plant moves» Spare parts including exchange programs» Authorized distributor for Heidenhain, Fagor, Fanuc FA, Siemens and Renishaw.» Certified Appraiser on staff» Way Grinding

Subscribe to our mailing list

Vertical LathesBERTHIEZ

OLYMPIA

SCHIESS

BULLARD

OKUMA + HOWA

62" table, 75" swing, Model TVM 125, 1997, Fanuc 15T, 95kw main spindle, Live tooling, tool and part probes, very heavy duty, Stock No. 407960” table, 70” swing, Model V60, New in 2001, rebuilt in 2013, Fanuc 18iTA control, 60” 4 jaw hydraulic chuck, 12 position ATC, chip conveyor, stock 427840” table, 55” swing, Model 14DKE100, updated electrics, fresh paint, Stock No. 4071Man-Au-Trol, 42” table, equipped with side head, from an aerospace facility, gently used, Stock No.4205ACT 2SP-V3, 10” chucks, twin spindle, Fanuc 0TT, 12 position turrets, 30HP spindles, Stock No. 4219

Horizontal Lathes“NEW”

“NEW”

MAZAK

RD&D

SAFOP

OKUMAHITACHI

MORI SEIKI

OKUMA+HOWA

NAKAMURA TOME

20” x 60” manual lathe, 10” 3 jaw chuck, 14” 4 jaw chuck, 4” spindle bore, splash guard, steady rest, stock 403920” x 80” manual lathe, 10” 3 jaw chuck, 14” 4 jaw chuck, 4” spindle bore, splash guard, steady rest, 2 available, stock 4036 and 4037Slant Turn 40N-ATC Millcenter 1000, Fanuc Control64" x 170", sliding bed type gap lathe, 16" hole through spindle, GN10 CNC control, Stock No. 384963" x 236", C axis, live tooling on programmable turret, Siemens 840C CNC control, Stock No. 379115” x 36”, LU-15 CNC Lathe, 1995, Stock No. 358029” swing, Turret Lathe, 6.25” hole through, Stock No. 318327” x 35”, Model SL6, Fanuc 6T, 1981, equipped with tailstock, 12 station turret, Stock No. 417311” x 13” CNC Lathe, Model HJ-28, 18” swing, Fanuc 21iTB Control, 8 position turret, 2004. 2 Available. Stock 4156 & 4157SC300, 1998, Fanuc 21 control, 10” hydraulic chuck, 12 position turret, Stock No. 4224

Surface & Blanchard GrindersARTER

SHIBAURARotary Surface, Horizontal Spindle, Stock No. 3827

48”, Model No. KRT-8D, Blanchard Style, Stock No. 3684

MiscellaneousIEMCA

DANDREA

DO-ALL

AMADA

ARCHDALE

PRATT & WHITNEY

AMERICAN

PFAUTER

Bar feeder, 2.55" bar capacity, 3600mm bar length , Stock No. 4066

CNC facing head

Horizontal Bandsaw, Model C-916A, Stock No. 3466

Punch Grinder, Stock No. 3463

Granite Table, 150" x 150", Massive!, Stock No. 3418

Radial Drill, Stock No. 4211

Jig Grinder, Model No 20, Pratt and Whitney rotary table,

from an aerospace facility, gently used, Stock No.4215

Radial drill, 5’ arm, 17” column, 5MT spindle taper, power

quill travel, Stock No. 4237

Gear hobber, Model P900 Turbo, 36” max workpiece

diameter, 2.5 max DP, 24” axial travel, max hob 7-3/8” dia x

9” long, Auto hob shift, swing away tailstock, change gears,

Stock No. 4253

Machining CentresTOS

LEADWELL

BRIDGEPORT

12” x 51”, Model FV 25, FAGOR CNC control, box ways, priced to sell, Stock No. 3710

20” x 30”, Model MCV-760XL, FANUC 0 CNC Control, 20 position ATC, Stock No. 3453

20” x 40” CNC VMC, Model VMC1000/22, 6000 RPM, 40 taper, 1998, Stock 4159

Cylindrical GrindersSCHAUDT

B&S13” x 27”, Universal Heavy Duty, Stock No. 3826

10” x 48”, Brown & Sharp, Model 1048 Microstatic, Stock No.3825

Horizontal Boring MillsTOS

TOS

UNION

SCHARMANN

W100, 1996, partially reconditioned, DRO, Stock No. 4268

WD130, 130mm spindle, Floor type boring mill, FAGOR 8055 CNC, 232” x 97” travel, 90” x 84” G&L table, linear scales, under power, Stock No. 4353

80mm Spindle, Model BFT 80/2, cleaned, cycled and painted. Stock No. 3408

125mm spindle, Model Ecocut, Siemens 880 Control, 3000 RPM, 50 HP spindle, built in CNC Facing head, 2 pallets, 50” x 63”

Milling MachinesHECKERT

DARBERT

16” x 63”, Model No. FSS 440 V1/2, Heavy Duty, Universal, Stock No. 3686

9” x 42”, Turret Style mill, Stock No. 3458


• Table size ranging from 2500 to 6000 mm • Machines large and heavy workpieces • High efficient machining • Rigid table bearing using hydro-static guiding principles • Precise table positioning (C-axis) and rotary tool drive with high power output • Siemens or Fanuc Control systems • Can be equipped to use high-pressure coolant

• High rigidity and stability • Functional design for easy maintenance • Short delivery time from manufacturer • Siemens or Fanuc control systems • Can be equipped with table positioning and rotary tool drive • Automatic exchange of turning tools and rotary tools • Ram designed for efficient and precise machining • Variable height of the working area • Possibility to perform high-pressure through tool coolant


MACHINERY IN INVENTORYTHE MACHINE TOOL SPECIALISTS

Full range of new and used machinery

Okuma CNC Lathe, ES-L8, 8 Station Turret

Accurpress, Model 713010, ETS 3000 CNC Control

Haas VMC, MV-6

VISIT OUR WEBSITE TO VIEW OUR EXTENSIVE INVENTORY

We will buy your surplus machines or complete plants

Trumpf CNC Punch, TC2000R, Tooling

Microcut Challenger Lathe, BNC-1640 Feeler VMC 600 + 800, Six in Stock

Haas VMC, VF-0Milltronics Lathe, ML26 x 80, live tooling


• Reach more people faster

• Email over 6500 companies using CLUE’s highly targeted industry list

www.cluemachines.com

Call today: 905-528-7765 or email us at: [email protected]

Over 6500 Names

CLUE MACHINERY ADVERTISER ONLINE

AuctionsPlant Closings

Liquidation SalesMultiple Machines

Great for

EMAILBLAST

LET US MANAGE YOUR MACHINES ONLINE

M A C H I N E R Y

Clue November, 2014 Page 15PAGE 30 CLUE, December 2013

AIR COMPRESSORS

JUN AIR 15 litre 120psi

DRILLS

KING

ALLEN drill press, 3ph

ROCKWELL

YAMAGUCHI

ARBOGA (G1304) Bench top drill

AMCO (Z5025A) Gearhead drill

TOA (HHK-EK) R/A drill, 600v

HERBERT 15" 3ph

FORK LIFT TRUCKS

YALE 3000lb propane

TCM 10000 lb Propane, 3stge mast

Assorted Pallet Trucks

HYSTER 15000 lb propane

GRINDERS

HARIG (612) Surface grinder

GRINDERS, MISCELLANEOUS

BALDOR 3/4hp pedestal grinder

THOR Pedestal grinder

LATHES, ENGINE

CHIEN-YEH 14"x 36" 24" gap

CLAUSING COLCHESTER 15"x 50"

TOS (SV18RA) 15"x 60"

LANG 16"x 42"

LODGE & SHIPLEY 16"x 60" 220v, single ph

VOEST 17"x 60"

MILLS, UNIVERSAL

HONEYWELL Light curtains

HASCO 9"x 42" R8 taper

SIMA ROSSI (VO) 10"x 48" 40 taper

FIRST (LC-20VSG) 10"x 51" 40 taper

TOS (FA3AV) 12"x 54" 40 taper

PRESSES

ARBOR (#2)

GREENERD (#3a) Arbor Press

JET (#3) Arbor Press AP3

BUFFALO 100T H press

ROLLS

B&B 36" x 18ga Hand Rolls

SAWS, BAND, HORIZONTAL

TOYANG 4"x 6" 110v

CRAFTEX 10" table saw

GREENLEE (1346) 7"x 10" single phase

LIAN FENG 12"x 16"

SAWS, BAND, VERTICAL

MACC (350) 2spd, Cold cut saw

ROLLIN 11" capacity

CLIPPER (BBC156) 14" Concrete saw

WILSON 28" Vertical Woodworking band saw

GROB 36" band saw

RIGID (MS1065LZA) 10" compound mitre saw

MAKITA 14" Chop saw, single phase

SHEARS

PEARSON 3/8"x 10’ hyd shear, w/ squaring

arm, sheet support, FOBG

WELDERS

MILLER (Big 30A) diesel welder

MILLER (250P) Stick welder

AERCOLOGY’S WELDAIR (WA1000CP)

Smoke eater

THERMAL ARC (PAK 5Xr) Plasma cutter

MILLER (Coolmate 4) Water cooler

ARCWELD (G022263) 230/460/575

THERMALARC (250 Tigwave)

CANOX Arc Welder

GULLCO welding positioner

L-TEC Heliarc 250hf plus squarewave

MISCELLANEOUS

Assorted Transformers

Hone, SUNNEN 1660K, w/Tooling

Hydraulic Pump

Industrial Fan, VARY 4’ x 4’

SUNNEN (Dial) bore gauge

MITUTOYO height gauges, assorted styles

Wet Soda Blaster 38 x 41 x 38

Assorted Rotary Tables

Mag. Lathe Chuck, ECLIPSE

Assorted Demagnetisers

HILTI (DXA40 driver) w/ XHN date stamp

attachment

Bead Rolling Machine, CMZ7, 114v, single ph

Pressure Washer, PSC 600v, 3ph

Assorted Measuring Tools

Angle Plates

Torque Wrench, PROTO 600 ft/lbs

Collet sets

Assorted vises

Assorted Chain Hoists

Threading Caddy, RIGID

Recoilers, DURANT

Magnets, 800-1000kg

Hardness Testers

Pedestal Buffer, CINCINATTI 14"

Disc sander, SIEMEC 12"

JET & CM 10T chain falls, 20’ lift

Phone: 905-634-8442 Fax: 905-681-69404280 Harvester Road, Unit 5 & 6, Burlington, Ontario, L7L 5Z5

www.paulmachinery.com

131 Citation Dr, Units 17 & 18

VAUGHAN-CONCORD

ONTARIO, L4K 2R3Tel: (905) 738-8730

Fax: (905) 738-5148

e-mail: [email protected]:www.sabito.com

MACHINERY INC.

CNC MACHINES CNC MACHINES CNC MACHINES CNC MACHINES CNC MACHINES

APPRAISAL SERVICES - AMEA & USPAP CERTIFIED

Late Model, Pre-owned, CNC Machine Tools.MACHINING CENTRES, VERT

DMG, DMU, 60T CNC (2002)

MATSUURA, MC-800 VF CNC (1995)

MONARCH, VMC-45 CNC (1989)

LEADWELL, MCV 760 XL

HERMLE, C800U (2001), 5-axis

OKUMA, MC-4VA (1984)

MATSUURA, ES-800, CNC (2005)

MACHINING CENTERS, HORZDAEWOO, DMH 400 (2000)

MAZAK Integrex E-1060V/8II (2010)

MITSUBISHI, MH-50C, 20" x 20", 158 ATC (1989)

MACHINING CENTER, UNIVHURCO C-40-U, 5 AXIS CNC (2004)

DECKEL MAHO, DMC 100 U, DouBlock 5-axis (2005)

CNC LATHESTAKISAWA, TS-20, CNC

WASINO, LJ-63M (1988)

BORING MILL, HORZ5" G & L, 450 Series MC50 Table Type, Fanuc CNC

GRINDERS, SURFACE10" x 24" THOMPSON

20" X 48" KARSTENS K29 Universal CNC Grinder

OTHER CNC MACHINESCombination Punch & High Def, W.A. WHITNEY 3400 RTC 680-850

Co-ordinate Measuring Machine, MITUTOYO, BRT 707

CNC Angle Rolls, TAURING, Alpha 40, 2"x 2"x 3/16"

CNC Woodworking Sizing System, SCHEER PA7000 (2002)

Coil Line, AIDA LFG 600R, Width 2.8"-23.6".Thick.02"-.177"

Feeder, IEMCA Prodigy 547, 6ft bar length.mag cap 15.75"(3/16"-2")

Hydraulic Press Brake, 135T X 12FT ATLANTIC HD135-12-10

CNC Press Brake, 230 Ton x 13' ACCUPRESS Model 50235 Accell (2006)

INDUSTRIAL MACHINE TOOLS & APPRAISALS


B1804 BENDERS, HYDRAULIC

5-1/2" ENERPAC, , Hyd. Pipe bender, w/asst’d tooling, (Trader

Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)

See Page 4

B5400 BORING MILLS, HORZ, FLOOR

5" UNION, BFP130 CNC, X-180" Y-98" Z-39" W-14", c/w

Heidenhain TNC 425 4-Axis, (Boulanger Machinerie Inc

Tel: 418-428-4709, Fax: 418-428-4710)

5.12" PEGAR, AF.13 TA, X-102" Y-70" Z-95" W-45", Call for

price, (Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)

5.12" TOS, WD-130, Floor type, Acu-rite DRO, Call for price,

(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)

B5500 BORING MILLS, HORZ, TABLE

3" MONTI, MB S-75, X-64" Y-40" Z-40", 31"x 47" table, (Trader


See Page 4

4" STANKO, , Rotary Table, ISO 50, 3-Axis DRO, (Boulanger

Machinerie Inc Tel: 418-428-4709, Fax: 418-428-4710)

4" TOS, W100, 4-axis Fagor DRO (Installed 2012), 24" Facing

head, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

5" UNION, BFT 125/5 (1976), 71"x 79", XYZ-100"x 79"x 71",

Rot tbl, fcg hd, mlg hd, Ref# 2376, (B F G Machine Tools Inc.

Tel: 780-434-7795, Fax: 780-436-0717)

B5550 BORING MILLS, CNC, HORZ, TABLE

5.1" SNK, NB130 PE 3.5 (2009), Table Type, Fanuc 16iM, CTS,

60 ATC, Vert. head Attach’s, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

B6006 BORING MILLS, VERT

39" Table SHIESS, , 4-jaws, max swing 57", Height Under rail

40", c/w side head, 7-355HP, 4axis Read out, (Boulanger

Machinerie Inc Tel: 418-428-4709, Fax: 418-428-4710)

55" Table STANKO, 1516, 4-jaws, max swing 64", Height Under

rail 45", 40HP, Side head, (Boulanger Machinerie Inc

Tel: 418-428-4709, Fax: 418-428-4710)

78.7" TOSHIBA, TUE-20 (2001), CNC, Fanuc 18T, max Sw.

93", (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

157.5" Sw STANKO, , Dist. Under rail 108", 240 Hp, Installed as

a New Mach. 1998, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

157.5" Sw STANKO, , Dist. Under rail 88.42", 168 Hp, table

rebuilt 2009, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

197" Sw GRAY, , Dist. Under rail 102", 125 Hp, (Trader


See Page 4

B7000 BRAKES, PRESS

ALLSTEEL, 45-8, w/Safety Lights, used, (Neiman Machinery

Sales Inc. Tel: 905-715-7776, Fax: 905-715-7744)

ALLSTEEL, 45-8, w/Safety Lights & CNC Backgauge, used,

(Neiman Machinery Sales Inc. Tel: 905-715-7776,

Fax: 905-715-7744)

ALLSTEEL, 70-10, w/Safety Lights & CNC Backgauge, used,


Fax: 905-715-7744)

ALLSTEEL, 65-10, (Neiman Machinery Sales Inc.

Tel: 905-715-7776, Fax: 905-715-7744)

55 Ton AMADA, FBD5020 (1996), NC9EXII 3-Axis CNC, 78.74"

O.A, Ref #10117, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis, (Trader


See Page 4

70 Ton x 10’ ALLSTEEL, , Hyd., (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

75 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader Machinery

Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

80 Ton x 8’ AMADA, ITPS080-25, CNC EMA 4-axis, (Machinery

S. Tremblay Tel: 819-477-6677, Fax: 819-477-6466)

88 Ton AMADA, FBDIII8025NT (2001), Amada AMNC-PC,

Ref# 10074, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

88 Ton AMADA, RG80 (2000), NC 9EXII 3-axis, Ref# 10033,

(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 6

88 Ton AMADA, HFB8025/8 (1998), Operateur 8-Axis, Ref#

10115, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 6

88 Ton AMADA, FBD8025 (1996), NC9EXII 3-Axis CNC, Ref

#10116, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 6

88 Ton x 8’-6" “NEW” FERRIC, Power Bend 2600-80, 3-axis,

CZ-142-04 compliant, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 1

88 Ton x 8’-6’6" HACO, PPM2575, 2-axis ATL 500, (Ferric


See Page 1

95 Ton TRUMPF, Trumabend V85 (2000), Delem DA65 CNC,

Prog. Z1,Z2, Ref# 9975, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

110 Ton AMADA, FBDIII 1030NT (2000), Up-Acting CNC, 122",


Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

110 Ton x 13.5’ GASPARINI, , XR Backgauge, CNC Crown,

Cybelec Control, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 1

120 Ton ALLSTEEL, #120-10 (1991), 12’ OA, 8’6" BH,

Autobend 5C + tooling, (Soudogaz Tel: 418 889-2002,

Fax: 418 889-2012)

125 Ton x 12’ ALLSTEEL, , No Back Gauge, (Machinery S.

Tremblay Tel: 819-477-6677, Fax: 819-477-6466)

125TM x 4000MM FUTURA WARCOM, , CNC 6-axis, with

tooling, (Machinery S. Tremblay Tel: 819-477-6677,

Fax: 819-477-6466)

130 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader


See Page 4

130 Ton x 12’ ACCURPRESS, , 2-Axis, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

137 Ton AMADA, HFB1254/5, NEW 1997, Operateur CNC,

165", Ref #10121, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

138 Ton AMADA, FBD1253NT (2002), Up-Acting CNC, Ref#


Fax: 845-398-0074) See Page 6

PAGE 18 CLUE, November, 2014

CLASSIFIED - LISTING YOUR MACHINERY AND EQUIPMENT TODAY

LEADS TO SUCCESSFUL SALES TOMORROW

Don't Delay! Phone: (905) 528-7765 Fax: (905) 917-0222

website: www.fabtec.ca

Proactively increase Machine Tool sales for our company through both quality customer service and new customer outreach. Daily activities will include calling customers by phone (prospecting), conducting face to face meetings (sales calls), assessing customers’ needs and requirements, preparing quotations and closing sales.Job Quali�cations: A minimum of 1-2 years of experience in the �eld of Industrial Machine Tool Sales or related industry is preferred.

Machine Tool Sales EngineerSales Job Available in Quebec

Excellent Bene�ts Package

Phone: 905-676-9265Email: [email protected]

Clue November, 2014 Page 17CLUE, April 2014 PAGE 19

B7000 BRAKES, PRESS H5975 HONES, HORIZONTAL

144 Ton TRUMPF, V130X (2002), 6-axis BG, EX-Stroke

Clamping, Crowning, ACB, Ref# 9976, (Jordan Craig

Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)

See Page 6

151 Ton SALVAGNINI, CPR135-3000 (2003), Roboformer

Bending Cell, Ref# 9521, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

176 Ton x 10’-8’4" “NEW” FERRIC, Power Bend 3100x160,

3-Axis, CZ142-04 Compliant, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 1

176 Ton x 12’-10’ “NEW” FERRIC, Power Bend 3600-160,

3-axis, CZ-142-04 compliant, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 1

187 Ton AMADA, HFE 1704S/7 (2000), Operateur 7-Axis CNC,

167", Ref# 10135, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

190 Ton TRUMPF, V170 (2000), Delem, Prog. Z1, Z2,

Crowning, Clamping, Ref# 10013, (Jordan Craig Machinery

Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 6



See Page 4

200 Ton x 4M AMADA, STPC200-40,, CNC 3-axis DNC7000,

tooling, (Machinery S. Tremblay Tel: 819-477-6677,

Fax: 819-477-6466)

220 Ton x 12’-10’ “NEW” FERRIC, Power Bend 3600-250,

3-axis, CZ-142-04 compliant, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 1

242 Ton AMADA, HFE2204/7 (2005), Operateur, Ref# 10059,


Fax: 845-398-0074) See Page 6

242 Ton AMADA, HFB2204 (1999), Operateur, Ref# 9897,


Fax: 845-398-0074) See Page 6



See Page 4

257 Ton TRUMPF, Trumabend V230 (2003), Delem DA69

6-axis, Clamping, Crowning, ACB, Ref# 9977, (Jordan Craig


See Page 6

257 Ton TRUMPF, Trumabend V230X (2003), Delem DA69

6-axis, Clamping, Crowning, ACB, Ref# 9980, (Jordan Craig


See Page 6

300 Ton x 20’ ALLSTEEL, , Hydraulic, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

350 Ton x 12’-10’ “NEW” FERRIC, Power Bend, XR, CNC

Crown, 2D Graphic, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 1

357 Ton TRUMPF, V320 (2000), Delem DA65, Ref# 10027,


Fax: 845-398-0074) See Page 6

400 Ton x 14’ PACIFIC, , Hyd, 12’ B/H, very nice condition,

dismantle, $35,000, (Soudogaz Tel: 418 889-2002, Fax: 418

889-2012)

C6306 CRANES & HOISTS

4 Ton ABELL-HOWE, , Pillar Jib crane, Mot. Rotation 360 deg.,

(Levage Manco Inc. Tel: 450-638-3877, Fax: 450-638-5898)

5 Ton R.REDDY, , Top running, 48’2"spam, 20’ lifting, 2sd, Call

for price, (Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)

5 Ton RICHARD WILCOX, , Top running hoist, (Levage Manco

Inc. Tel: 450-638-3877, Fax: 450-638-5898)

7.5 KM KONE, , Under running, 32’ span, 26’ lifting height,

(Machinery S. Tremblay Tel: 819-477-6677,

Fax: 819-477-6466)

15 TM KONE, , Under running, 2x7.5TM hoist, 32’ span, 26’

lifting height, (Machinery S. Tremblay Tel: 819-477-6677,

Fax: 819-477-6466)

25 TM KONE, , 45’ span, 68’ Lifting height, (Machinery S.

Tremblay Tel: 819-477-6677, Fax: 819-477-6466)

30 TM KONE, , 56’-7’’span, 75’ lifting height, remote control,

(Machinery S. Tremblay Tel: 819-477-6677,

Fax: 819-477-6466)

40 Ton KONE, , 47’ span, 75’ lifting, 2x20t hoist, remote control,

(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)

50 TM KONE, , 2x25T hoist, 45’ span, 68’ lifting height, remote

control, (Machinery S. Tremblay Tel: 819-477-6677,

Fax: 819-477-6466)

150’ run way for 30 & 50 Ton crane, including rail, (Machinery S.

Tremblay Tel: 819-477-6677, Fax: 819-477-6466)

D5700 DRILLS, RADIAL

36" x 4MT TONE FAN, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 3

3’ Arm OOYA, , 1500rpm, w/work table, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

3’ Arm SUNLIKE, , 1500rpm, w/work table, (Trader Machinery


4’ KITCHEN & WADE, E-24, MT5, (Machinery S. Tremblay

Tel: 819-477-6677, Fax: 819-477-6466)

5’ x 5MT IKEDA, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 3

DONAU, , Universal, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 3

E2425 EDM, CONVENTIONAL NC/CNC

MAXIMART, V45-100, Die Sinker, Mint Condition, (Machinerie

Gilles Lupien Tel: 819-478-5266, Fax: 819-478-5266)

50 Amp ARISTECH, , CNC, Sinker, 25.6"x 13.8" table, (Trader


See Page 4

F5006 FURNACES

Heat Treating , New & Reconditioned, Powered by Electric,

Gas, Oil, Propane, for all purposes, (Park Thermal

International Tel: 905-877-5254, Fax: 905-877-6205)

G4706 GRINDERS, CYLINDRICAL

12"x 16" PARKER MAJESTIC, 1C, Universal, Ref# 9882,


Fax: 845-398-0074) See Page 6

G8025 GRINDERS, SURFACE, RECIPROC

6"x 18" CIM, , Manual, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

6"x 18" LIAN FENG, , Manual, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

G9030 GRINDERS, MISCELLANEOUS

AMADA, Togu III (2006), Automatic Punch & Die Grinder, Ref#


Fax: 845-398-0074) See Page 6

DECKEL, SO, End Mill, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 3

HEINMAN, , Cutter, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 3

H5975 HONES, HORIZONTAL

SUNNEN, 1804, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 3

AlbertaB F G Machine Tools Inc., Edmonton (Brian)....................................................... 780-434-7795 ...............780-436-0717................16

British ColumbiaECCO Machinery, Surrey (Larry) ......................................................................... 877-513-1773 ...............778-298-2024................16

Modern Tool (BC) Ltd, Port Coquitlam (Pam) ...................................................... 604-472-1444 ...............604-472-1455................22

ONBrighton Machinery Sales Inc, Ingersoll (Brian) ................................................... 519-485-7089 ...............519-485-7368................16

DiPaolo Machine Tools Ltd., Mississauga (Nelson).............................................. 905-676-9265 ...............905-676-9436................10

Fabri-Hermann Machines Inc, Cambridge (Karl).................................................. 519-623-1987 ...............519-623-3724................19

Fabtec Machine Tool Solutions Inc, Oakville (Raj) ............................................... 905-469-1586 ...............905-469-3054................16

Ferric Machinery Inc, Mississauga (Koen) ........................................................... 877-337-7424 ...............905-820-3234..................1

Havlik Int’l Machinery, Cambridge (John)............................................................. 519-624-6240 ...............519-624-4119 ................12

Infinity Assets Solutions, Concord (Leslie)........................................................... 905-669-8893 ...............905-669-7512..................9

L S Walker Machine Tools Inc, Milton (Chris)....................................................... 905-876-0890 ...............905-876-1959................20

Machine Solutions Inc., Guelph (Andrew)............................................................ 416-220-5910...................................................... 23

Natex Machinery Group Inc., Brampton (Alex) .................................................... 905-789-0070 ...............866-386-3281..................8

Neiman Machinery Sales Inc., Newmarket (Kurt) ................................................ 905-715-7776 ...............905-715-7744................16

Park Thermal International, Georgetown (Sales)................................................. 905-877-5254 ...............905-877-6205................16

Paul Machinery, Burlington (Paul)........................................................................ 905-634-8442 ...............905-681-6940................15

Phase Quest, Mississauga (Harold)..................................................................... 416-578-5399 ...............416-753-7209................16

Powermaster Machinery Ltd, Mississauga (Peter)............................................... 905-624-9327 ...............905-624-8591..................3

S K Braly Machinery Inc, Mississauga (Steve) .................................................... 905-793-8080 ...............905-793-2190................18

SMTCL Canada Inc., Oakville (Merry) ................................................................. 905-829-1579 ...............905-829-8692..................2

Sabito Machinery Inc, Vaughan/Concord (David)................................................. 905-738-8730 ...............905-738-5148..................7

TOS Trade Canada Inc., Milton (Marian) ............................................................. 905-878-0888 ...............905-878-9022................24

Trader Machinery Inc, Concord (Jonathan).......................................................... 905-669-7507 ...............905-669-7512..................4

QCBoulanger Machinerie Inc, St-Ferdinand (Ben).................................................... 418-428-4709 ...............418-428-4710................16

Levage Manco Inc., Ste. Catherine (Daniel) ........................................................ 450-638-3877 ...............450-638-5898................16

Machinerie Gilles Lupien, Drummondville (Gilles)................................................ 819-478-5266 ...............819-478-5266................16

Machinery S. Tremblay, Drummondville (Sylvain)................................................ 819-477-6677 ...............819-477-6466................16

Seguin Machinery Ltd, Vaudreuil-Dorion (Gerry).................................................. 514-935-3531 ...............514-932-4459................13

Stock Machine Tools Co, Laval (Andre) ............................................................... 514-326-7006 ...............514-329-2599................16

USAJordan Craig Machinery Int’l Inc, New City, NY (Jordan) ..................................... 845-398-0073 ...............845-398-0074..................6

COMPANY PHONE FAX PAGE

ADVERTISERS DIRECTORY


I6200 IRONWORKERS L0850 LASERS

PAGE 20 CLUE, April 2014

I6200 IRONWORKERS

50 Ton FERRIC, , Single Operator, 5 Stations, (Ferric


See Page 1

65 Ton FERRIC, , Single Operator, 5 Stations, (Ferric


See Page 1

80 Ton FERRIC, , Dual Operator, 5 Stations, (Ferric Machinery






110 Ton GEKA HYD, , 5-station, 6"x 6"x 1/2" angle, Also, large

stock of new machines, (Neiman Machinery Sales Inc.

Tel: 905-715-7776, Fax: 905-715-7744)

45~175 Ton HILALSAN, , call for price, (Soudogaz Tel: 418

889-2002, Fax: 418 889-2012)

K3004 KEYSEATERS

DAVIS, No.5, Cap. Keyway cutting 1/16" to 1-1/2", (Trader


See Page 4

L0850 LASERS

1500 Watt MAZAK, STX510 (1999), 5’ x 10’, Approx. 70,00hrs,

Mazak Refurb 2010, Ref# 9230, (Jordan Craig Machinery Int’l


1500 Watt AMADA, Pulsar LC2418AII (1997), Fanuc 16L, 72" x


Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

1500 Watt MAZAK, STX48MKII, Mazatrol L32B, 43,000 hrs,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

1500 Watt MAZAK, STX48MKII, Mazatrol L32B, 43,000hrs,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

1500 Watt AMADA, LC1212A III, sheet size 50 x 50 before

repositioning, Fanuc Ctl, Amada maintained, (Ferric


See Page 1

2000 Watt TRUMPF, L2030 (2007), integrated load/unload

automation, Ref# 9589, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

2000 Watt TRUMPF, L2510 (2005), Load/Unload Cell, Ref#


Fax: 845-398-0074) See Page 6

2000 Watt CINCINNATI, CL-6 (2000), 5’x 10’ Dual pallet, Fanuc

C2000, chiller, Ref# 10019, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

2KW TRUMPF, TruLaser 1030 (2010), 5’ x 10’, Ref# 10099,


Fax: 845-398-0074) See Page 6

2000 Watt AMADA, Pulsar LC2415XLA3 (1998), Current

Machine hours 47,600, Ref# 10008, (Jordan Craig Machinery


2000 Watt AMADA, LC1212XL (2000), Fanuc 160iL, CNC

control, 25,000hrs, Ref# 9944, (Jordan Craig Machinery Int’l


2500 Watt MAZAK, STX48MKII (2004), Mazatrol L32B, Ref#


Fax: 845-398-0074) See Page 6

2500 Watt MAZAK, STX48MKII (2004), Mazatrol L32B, 38,

100hrs, Ref# 10025, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

2500 Watt MAZAK, STX510 MKII (2004), 5’ x 10’, 41,000 hrs,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

2500 Watt AMADA, Pulsar LC2415NT4 (2008), LMP3015A

Load/Unload, Ref# 10131, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

2500 Watt MAZAK, STX510 MKII (2000), 5’ x 10’, 41,000hrs,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

2500 Watt AMADA, Pulsar LC2415NT4 (2008), Approx.

5900hrs, Ref# 10067, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

3000 Watt TRUMPF, L2530 (1999), 4’x 8’, Siemens, 9483

Beam on hours, Ref# 9753, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

3KW AMADA, Altair LC2412 (1999), 10 shelf storage system,

Load/unload, Ref# 9979, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

3200 Watt TRUMPF, TCL-3030 (2001), 5’x 10’, Ref# 9914,


Fax: 845-398-0074) See Page 6

3200 Watt TRUMPF, L2530PLUS (2003), Siemans, 4’ x 8’, Ref#


Fax: 845-398-0074) See Page 6

4000 Watt AMADA, LC3015F1NT (2008), 5’ x 10’, Ref# 9779,


Fax: 845-398-0074) See Page 6

4000 Watt AMADA, Gemini FO4020NT (2005), 6’ x 12’, Approx.

22,454hrs, Ref# 9774, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

4000 Watt MAZAK, Hypergear 510 (2008), Approx. 25,000hrs,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

4000 Watt MAZAK, Hypergear 510 (2006), Installed New:2008,

Less than 8500hrs, Ref# 9707, (Jordan Craig Machinery Int’l


4000 Watt AMADA, LC3015CII (2008), Theta 5-axis, No rotary

chuck, Ref# 9953, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

4000 Watt MAZAK, STX510 (2002), Refurbished by Mazak,

Approx. 1000hrs, Ref# 10028, (Jordan Craig Machinery Int’l


4000 Watt MAZAK, STX510 (2002), Refurbished by Mazak,

Approx. 1000hrs, Ref# 10029, (Jordan Craig Machinery Int’l


CERTIFIED EQUIPMENT APPRAISALS * Toronto, OntarioPhone: (905) 793-8080 Fax: (905) 793-2190 Email: [email protected]

W W W . S K B R A L Y . C O M

CLUE, July 2010 Page 3

DRILLS, GEARED HEAD

ARBOGA, A3808DRILLS, RADIAL

DONAU, DR40-Z rapid radial drillDRILLS, MISCELLANEOUS

SAALFELD, BS50 Pillar drill, 2" capacityGRINDERS, CYLINDRICAL

LANDIS, 4"x 18"

TOS, BHU25, 10"x 24"

JONES & SHIPMAN, 10"x 27"GRINDERS, INTERNAL

OVERBECK, Zetto-30GRINDERS, SURFACE, RECIPROC

BROWN & SHARPE, 6"x 12"

OKAMOTO, ACC-618, 6"x 18" Hydarulic

NICCO, NFG-515HD, 6"x 20" Form grinderGRINDERS, TOOL & CUTTER

CHEVALIER, FCG-510

HASBERG, FS5 CutterGRINDERS, MISCELLANEOUS

BLANCHARD, 16" Vertical surface grinderKEYSEATERS

MORRISONLATHES, CNC

DAEWOO, 10 HC CNC Turning Centre

COLCHESTER, Storm 90, 10" (2000)

NAKAMURA TOME, TMC-15

NAKAMURA TOME, SL-JRLATHES, ENGINE

LANSING, TAD-FS-650, 53" facing lathe

FEELER, FTL-618, 11"x 18" precision lathe

CLAUSING METOSA, C1340, 13"x 40"

TOS, SUI40/1000, 16"x 40"

TOS, SN50B, 20"x 80"

TOS, SN63/2000, 24"x 80"

MORANDO, 24"x 120"

PBR, TM-300, 24"x 196"MILLS, VERTICAL

DELTA, 9"x 49"

TOPWELL, VK 4, 10"x 50"

KAO FONG, 12"x 50" Horz/VertSHEARS, POWER SQUARING

AMADA, M-2560, 1/4"x 8’TOOLING

WAHLI, MXH 300/200 Tool setter

LYNDEX, E348 Elba tool setterMISCELLANEOUS

Centering & Facing Machine, SENECA FALLS, CS, LO. Swing

Coordinate Measuring Machine, MITUTOYO, FN-905CMM

End Finishing Machine, SOCO, EF-PV/52

Parts cleaner, HOTSY, 7630

Parts cleaner, HOTSY, H20-2836

Thread Rolling Machine, SHENG JIAN, Z28-63

Tilting box table, 30"x 24"x 22"

Z9000 MISCELLANEOUS Z9000 MISCELLANEOUS

PAGE 22 CLUE, April 2012

MACHINERY ADVERTISER

PUBLISHER

David Stapleford

PRINTED BY:

Ricter Web Printing

DELIVERY

Clue is delivered monthly and is sent bythird class mail on or before the businessday following the seventh of each month

DEADLINE

The deadline for advertising is the dayfollowing the last Wednesday of the month

ADDRESS

343 Smith AveBurlington, ON, L7R 2T9

Phone: 905-528-7765Fax: 905-917-0222


e-mail: [email protected]

MUST SELL

Cincinnati 10ga x 10'

Power Squaring Shear

Bliss #21

Punch Press

Contact: TCL Asset Group Inc.Ph: 416-736-1367 x228

Website: www.managingyourassets.com

Alberta

B F G Machine Tools Inc., Edmonton (Brian) ...................................780-434-7795........780-436-0717 .......15

British Columbia

ECCO Machinery, Surrey (Rick) ......................................................778-298-2023........778-298-2024 .......17

Modern Tool (BC) Ltd, Port Coquitlam (Pam) ..................................604-472-1444........604-472-1455 .......16

Ontario

Brighton Machinery Sales Inc, Ingersoll (Brian) ...............................519-485-7089........519-485-7368 .......15

Cameron Steel, Lindsay (Bob) ........................................................705-878-0544........705-878-0560 .......21

Compumachine Canada, Toronto (Peter).........................................416-291-9499........416-291-4990 .......22

Corporate Assets Inc, Toronto (Daphne) .........................................416-962-9600........416-962-9601 .......27

Dipaolo CNC Retrofit Ltd., Mississauga (Nelson) ............................905-676-9265 ......................................10

Fabtec Machine Tool Solutions Inc, Oakville (Raj)............................905-469-1586........905-469-3054 .......18

Ferric Machinery Inc, Mississauga (Koen) ......................................877-337-7424........905-820-3234 .........3

Haco Canada, Mississauga (Francis)..............................................905-828-1087........905-828-2062 .......26

Havlik Int’l Machinery, Cambridge (John) ........................................519-624-6240........519-624-4119 .......13

Hayden Lee, Markham (Hayden) ....................................................905-201-7841........905-201-7842 .......14

Hove Machine Services, Wasaga Beach (David) .............................705-429-5910........705-429-1557 .......15

Infinity Assets Solutions, Concord (Leslie) ......................................905-669-8893........905-669-7512 .........2

L S Walker Machine Tools Inc, Milton (Chris) ..................................905-876-0890........905-876-1959 .......12

Machine Solutions Inc., Guelph (Andrew) .......................................416-276-0596 ......................................25

Micro Trend Robotics Inc, Pickering (Peter) ....................................905-509-1218........905-509-2687 .......15

Nimesch Machinery, Markham (George) .........................................416-786-7762........905-415-3868 .........1

Nova International, Mississauga (Richard) ......................................905-624-4522........905-624-1917 .......15

Park Thermal International, Georgetown (Sales) ..............................905-877-5254........905-877-6205 .......15

Phase Quest, Mississauga (Harold) ................................................416-578-5399........416-753-7209 .......15

Powermaster Machinery Ltd, Mississauga (Peter)...........................905-624-9327........905-624-8591 .........5

S K Braly Machinery Inc, Mississauga (Steve) ................................905-793-8080........905-793-2190 .......23

Sabito Machinery Inc, Vaughan/Concord (David) ............................905-738-8730........905-738-5148 .........4

Stan Canada Machinery & Equipment Ltd, Brampton ......................416-252-5767........416-252-4770 .......15

TOS Trade Canada Inc., Milton (Marian)..........................................905-878-0888........905-878-9022 .......28

Trader Machinery Inc, Concord (Jonathan) .....................................905-669-7507........905-669-7512 .........6

Quebec

Boulanger Machinerie Inc, St-Ferdinand (Ben).................................418-428-4709........418-428-4710 .......15

Camex Machinery, Montreal (Elias).................................................514-581-5370........888-414-6441 .......17

Machinerie Gilles Lupien, Drummondville (Gilles)............................819-478-5266........819-478-5266 .......23

Machinery S. Tremblay, Drummondville (Sylvain)............................819-477-6677........819-477-6466 .......15

Soudogaz, St-Lambert de Lauzon (Charles)....................................418 889-2002 ........418 889-2012........25

Stock Machine Tools Co, Laval (Andre) ..........................................514-326-7006........514-329-2599 .......15

USA

Jordan Craig Machinery Int’l Inc, New City, NY (Jordan)..................845-398-0073........845-398-0074 .........8

S R I Advertising, Encino, CA (Susan) ............................................818-761-1792........818-793-0351 .......25

Y.Franke & Company, LLC., Hoffman Estates, IL (York)....................847-874-8972........847-596-8006 .........9

COMPANY PHONE FAX PAGE

ADVERTISERS DIRECTORY


L0850 LASERS L6135 LATHES, N/C & CNC

4000 Watt TRUMPF, TCL3030 (1999), Siemans CNC, 60"x


Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

4KW MAZAK, SuperTurboX MarkIII (2010), 5’ x 10’, 7/8"

Load/Unload System, Ref# 10130, (Jordan Craig Machinery


4000 Watt AMADA, FO MII RI 3015 (2011), 5’ x 10’ Rotary

Index, Ref #10120, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

4000 Watt AMADA, Pulsar 2415NTA4 (2010), 8,500hrs, Ref#


Fax: 845-398-0074) See Page 6

4000 Watt AMADA, Gemini FO-3015NT (2004), 5’x 10’, 24K

Turbo blower w/6K hours, Ref# 10076, (Jordan Craig


See Page 6

4000 Watt AMADA, Gemini FO-3015NT (2006), 5’x 10’, Brand

new Turbo blower, Ref# 10087, (Jordan Craig Machinery Int’l


5200 Watt BYSTRONIC, Byspeed 3015 (2005), 5’x 10’, Ref#


Fax: 845-398-0074) See Page 6

MAZAK, FMS-A48-12 (2004), 6 Shelf loader, Ref# 9720,


Fax: 845-398-0074) See Page 6

MAZAK, FMS-A48-12 (2000), Shelf Loader, Ref# 10026,


Fax: 845-398-0074) See Page 6

MAZAK, FMS-510 (2002), Load/Unload system w/10 Shelf

tower, Ref# 10030, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

L3000 LATHES, ENGINE

FEELER, , Hardinge Type, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 3

12"x 36" LOGAN (by Powermatic), 2557 VLH, Variable speed, 3

& 4 jaw chucks, collets., (Brighton Machinery Sales Inc

Tel: 519-485-7089, Fax: 519-485-7368)

13"x 30" HARRISON, V.S., (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 3

13"x 40" COLCHESTER, Master 2500, 5HP, (Trader Machinery


13"x 40" COLCHESTER, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 3

18" x 60" “New” POWERTURN, 460, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

18"x 80" DARBERT, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 3

20"x 40" PROSTAR, 6250, 3 & 4 Jaw chucks, Steady & Follow,

(Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

20"x 80" TOS, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 3

TOS, SN-55B, 22" Swing, 32" in Gap x 156" Centers,

(Machinerie Gilles Lupien Tel: 819-478-5266,

Fax: 819-478-5266)

22"x 60" LODGE & SHIPLEY, , real heavy duty, DRO, few

hours, (Machinerie Gilles Lupien Tel: 819-478-5266,

Fax: 819-478-5266)

23"x 80" VDF, E3H (1976), 14"OCS, 3-1/8"sp bore, 15hp. taper,

Ref# 2033, (B F G Machine Tools Inc. Tel: 780-434-7795,

Fax: 780-436-0717)

SHENYANG, CW 6263B, 26" swing x 120" centers, Mint cond.,


Fax: 819-478-5266)

26"x 120" CHIEN YEH, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 3

40"x 120" JHS United, , $-Jaw Chk, (2) Steady Rests, (Trader


See Page 4

40"x 315" STANKO, , Superb shape, 4 jaw chuck, $34,000,

(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)

50"x 120" SUMMIT, , 6"spnidle, 4 jaw chuck, DRO, (Soudogaz

Tel: 418 889-2002, Fax: 418 889-2012)

63"X 106" BOKO, D82H, Semi-Automatic Spinning lathe,


Fax: 905-669-7512) See Page 4

L3300 LATHES, VERTICAL

55" STANKO, 1516, 4-jaw chk, turning cap, work height 43",

top shape, (Soudogaz Tel: 418 889-2002, Fax: 418

889-2012)

L6135 LATHES, N/C & CNC

OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw,

2" Bar cap, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

MAZAK, (2006), Quickturn Nexus 450-II, 33.27"sw, 80" Mach.

Length, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

HYUNDAI KIA, SKT250SY (2010), Fanuc 18T, Live tooling,

Sub Spdl.,10"Chk, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

HARRISON, Alpha 400, 16"sw x 52"cc, Fanuc 2-1/8" bore,


Fax: 905-669-7512) See Page 4

12"x 40" HYUNDAI, HIT-30-S (1995), Seimens 840C, Over

Bed 20", Mint cond., (Machinerie Gilles Lupien

Tel: 819-478-5266, Fax: 819-478-5266)

16"x 40" MICROWEILY, TY-1540D (2007), Teach-Turn CNC

toolroom, Fagor 8055TC, 7-1/2" 3 jaw chk, V8 hyd turret,

Ref# 2331, (B F G Machine Tools Inc. Tel: 780-434-7795,

Fax: 780-436-0717)

26.8"Sw, 41.2"ctrs GILDEMEISTER, CTX510 (2004), Fanuc

21iT, 10"chk, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

27"Sw, 50"ctrs GILDEMEISTER, CTX600 Linear (2002),

Heidenhain iTNC, 15"chk, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

CLUE, April 2014 PAGE 21

• 2000 HWACHEON Vert. Machining Ctr. X-78-1/2 Y-33-1/2 Z-29-1/2• 2003 ROMI CNC Lathe, 18 Over saddle, 118” center, 30 + Toolholders• 1985 MORI SEIKI, 12” Chucker x 20” Center• 1987 DAHLIH Mill, Vert & Horz, 5HP, X-36 Y-16 Z-16 with Readout• 1985 DAHLIH Mill, Vert & Horz, 5HP, X-36 Y-16 Z-16 with Readout• 1999 Vert. Manual Mill, X-37 Y-14 Z-18, with Readout• 1985 FIRST Manual Mill, X-37 Y-14 Z-18, with Readout• 1999 FIRST Manual Mill, X-37 Y-14 Z-18, with Readout• 1985 Manual Lathe, 12” Chuck, 4-Jaw, 24” Steady Rest, 78” Cent.• 1985 MAS Radial Drill with box Table and 6’Rails, Up to 3” Drill, 5’ Travel• 60 Ton NIAGARA OBI Press, 70” Stroke, 32 x 21 TSlot Bolster, 14” Max Sheet Height• 650 Amp Mig-Stick Welder• Bandsaw 20” Throat• Cut Off Saw• Lots of Measuring Tools, Vernier up to 60”, Micrometer up to 18”• Optical Comparator 20”, one 14”• SIP Jig Borer X-20 Y-16 Z-22• Manual Surface Grinder, BROWN & SHARPE 6 x 16• 2 Hydraulic Surface Grinders, 8 x 20 Magnetic, One Electric & one Man.• THOMPSON Hydraulic Surface Grinder, 18 x 72 Electric, Magnetic• CHURCHILL ID OD Grinder, 36” Between Center

RETIRING Sale of Machine Shop in Cambridge

For an Appt call 519-221-6551

• Post your machine photos and videos online for FREE!

• Receive online requests for quotes• Machine turnover creates better search

results for your machines


Call today: 905-528-7765email us at: [email protected]

CLUE ONLINE MACHINE LISTINGS

M A C H I N E R Y

Let us manage your machines online.Find out how today!


M0130 MACHINING CTRS, HORZ

MORI SEIKI, NHX-5000 (2012), X-28.7" Y28.7" Z-34.6",

Installed 2013, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

M0185 MACHINING CTRS, VERT

DECKEL MAHO, DMU50T, 3 + 2, CNC, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

BOSTOMATIC, BD18-1 (1999), Z-17.7" Y-11.8" Z-17.7", 10,

000rpm, ATC 18, CAT 20, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

MATSUURA, RA-2G (2000), X-26" Y-18.1" Z-19.02", Yasnac,


Fax: 905-669-7512) See Page 4

LAGUN, VMC 3516 (2000), X-30" Y-16" Z-20", Dynapath Delta

CNC Control, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

TONGTAI SEIKI, TMV-850A (2007), X-33.5" Y19.7" Z-20.9",


Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

FADAL, VMC4020FX, X-40" Y-20" Z-20", Fanuc Oi-MC, (Trader


See Page 4

OKUMA, ES V4020 (2001), X-40" Y-20" Z-20", OSP U10

Control, 40 taper, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

CINCINNATI, Arrow 1000, X-40" Y-20" Z-22", Acramatic 2100,

CTS, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

HAAS, VF3 (2011), X-40" Y-20" Z-25", 5-Axis Rotary & Tilting,

10,000rpm, CAT 40, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

FADAL, VMC4020, X-40" Y-20" Z-28", CNC 88HS, (Trader


See Page 4

BRIDGEPORT HARDINGE, (2007), X-40" Y-24" Z-24", Fanuc

18iMB, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

OKUMA, MC-50VA, X-41.3" Y-20" Z-22", OSP7000 Control, 50

tpr, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

OKK, MCV-560 (2000), X-41" Y-22" Z-22", (Trader Machinery


M0850 MEASURING MACHINES

SHEFFIELD, Cordax D-28 (2009), Discovery III, Ref# 9855,


Fax: 845-398-0074) See Page 6

M1550 MILLS, CNC

JAFO, , Ram Type, Heidenhain, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 3

12"x 51" TOS, FV-30 (1999), Heidenhain TNC-310 ctl, 40 taper,


Fax: 905-669-7512) See Page 4

12"x 60" table EAST LION, EL-BT250/3ACNC, Bed Type,

50x21x21 Trvl, NT40 nose, 3600 RPM, (Machinery S.

Tremblay Tel: 819-477-6677, Fax: 819-477-6466)

M1659 MILLS, UNIVERSAL

12"x 55" CMC, FU-2, Vert/Horz, 6.5hp, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

M1974 MILLS, HORIZONTAL

23"x 95" CINCINNATI, 525-20-HP (1964), powered vert o/a,

#50 taper, pendant, Ref# 2288, (B F G Machine Tools Inc.

Tel: 780-434-7795, Fax: 780-436-0717)

M2075 MILLS, PLANER TYPE

64"x 244" STANKO, 7216-G (1982), 56"x 238"tbl, 71"btwn col,

58"max UR, gr hd, mlg hd, plr hd, side hd, Ref# 2399, (B F G

Machine Tools Inc. Tel: 780-434-7795, Fax: 780-436-0717)

M2824 MILLS, VERTICAL

9"x 42" FIRST, LC 1-1/2 VS, DRO, P/F on X, Power Drawbar,


Fax: 905-669-7512) See Page 4

10"x 50" FIRST, LC-20VS, Fagor 2-Axis DRO, 5HP, 40 Taper,


Fax: 905-669-7512) See Page 4

17"x 78" TOS, FA5B-V, 50 taper, 20 Hp, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

N5230 NOTCHING MACHINES(NEW) BOSCHERT, , 5/32" x 8-7/8" x 8-7/8", Hydraulic, (Trader


See Page 4

1/4" x 8.6"sq (NEW) FERRIC, , variable angle, (Ferric


See Page 1

1/4" x 8.6"sq (NEW), , Fixed angle, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 1

O7397 OVENSNew & Reconditioned , Powered by Electric, Gas, Oil, Propane,

(Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

P6100 PRESSES, OBI60 Ton BLISS, C-60, 4"stk, A/C, (Brighton Machinery Sales Inc

Tel: 519-485-7089, Fax: 519-485-7368)

M0130 MACHINING CTRS, HORZ P6100 PRESSES, OBI


OvensFor Powder Coating, Aging,

Stress Relief, Normalizing

Gas or Electric

Numerous Sizes Available

Call: 905-702-4644

7055 Auburn Rd., Milton, ON L9T 7V9Ph: (905) 876-0890 Fax: (905) 876-1959

Email: [email protected]: www.walkermachinery.com

Page 10 CLUE, May 2012

BORING MILLS, CNC, HORZ, FLOOR

UNION (BFP 130 CNC) 5.12" (1994) 120"x 275", Heidenhain ctrlBORING MILLS, HORZ, TABLE

TOS (W100A) 4" 44"x 63"x 63" trvls, 4-axis DRO, 49"x 49" rotary table, new 1996TOS (WH 10 CNC) 4" 43"x 49"x 37" travels, Heidenhain i530 ctl, new 2006TIGERCUT (110 CNC) 4.3" 63”x 86” travels, Fanuc 31i control, new 2012TIGERCUT (110 CNC) 4.3" 63"x 86" travels, Fagor CNC, 1 degree index table, new 2005TOS (WHQ13.8 CNC) 5.12" (2008) 40 ATC, 98”x138” travels, CTS, 3000rpm, Fanuc 31i control, niceTOS (W100A) (2014) Remanufactured, 50 tpr spindle, factory rebuilt to new tolerance, 5-axis

Heidenhain DROBORING MILLS, VERT

G&L 72" CNC, 12 ATC, live tools, Refurbished 2009, Fanuc 21i ctlDRILLS, RADIAL

MAS (VR 8A x 2500) 3" capMAS (VO 50) 2.5" 5’, Box table, good

HONES

SUNNEN (MBB-1800) w/ Sunnen tooling and tooling cabinetLATHES, ENGINE

TOS (SN 400N) 16"x 80" (2003) 2-Axis, DROENTERPRISE 20"x 120"TACCHI 50"x 315" (1973) Steadies, follow rest, 4-jaw chuckPOREBA (TCG 160) 63"x 393" As New!

LATHES, N/C & CNC

MORI SEIKI (SL-6) CNC, 50hp motor, Fanuc 6T control, 15"chk, new 1981MACHINING CTRS, HORZ

NIIGATA (HN 80 FC) 32"x 32" pallets Fanuc 11m control, 6 pallet pool, built in facing head and in/outspindle movement for boring mill applications, 120 ATC, new 1992

MACHINING CTRS, VERT

KAO MING 30"x 60" (2007) 50tpr, 8,000rpm geared head, full enclusure, CTS, Fanuc 18i ctlHARTFORD (PRO 4150) 60"x 157" 50 taper, 10,000 DDS, Fanuc, new 2012

MILLS, UNIVERSAL

TOS (FGS 63T plus) 25"x 71" (2002) 3-Axis DRO, Variable speeds/feeds, pendant ctl, 50tpr, unv head

ZAYER (66MB) 28"x 80" 3-Axis DRO, Unv head, pendant ctl, variable speeds/feedsSAWS, BAND, VERTICAL

MARVEL (81/12) 45 deg tilt, new 2003MISCELLANEOUS

New Cast Iron Angle Plates 12"x44" up to 32"x83"50 plastic automotive skids, 45"x48" pallet, - 4 way pick up138" x 78" x 14", Cast Iron Floor Plates 2 AvailableCLIMAX, Portable Drilling unit (KM 3000)TOS, Rotary Table (ISO 16) 86"x 86" 60" Travel, 17 Ton, Rotary & Linear DRO

2002 TOSFGS 63T PlusUniversal Mill

Clue November, 2014 Page 21CLUE, May 2010 PAGE 21

P6100 PRESSES, OBI R5603 ROLLS, PLATE BENDING

75 Ton TOLEDO, , Air Clutch & Brake, 5"stroke, (Brighton

Machinery Sales Inc Tel: 519-485-7089, Fax: 519-485-7368)

80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x

36"bed, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

100 Ton CKD HRONOV, , TYP: LEND 100, A/C, Variable

Stroke Length, Command stamp ctls, (Brighton Machinery

Sales Inc Tel: 519-485-7089, Fax: 519-485-7368)

110 Ton NIAGARA, Model: A 5 1/2, 6" Stroke, Mech. Clutch

w/air assist, (Brighton Machinery Sales Inc

Tel: 519-485-7089, Fax: 519-485-7368)

P7100 PRESSES, STRAIGHT SIDE

800 Ton BLOW, SC2-800-96-60 (1998), 96"x 60" bed, 16"stk,

20-40spm, Like New!, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

P9150 PUNCHES, SINGLE STATION

30 Ton EUROMAC, CX750/30, 750mm Throat, (Neiman

Machinery Sales Inc. Tel: 905-715-7776, Fax: 905-715-7744)

40 Ton STRIPPIT, Super 750 SG, 750mm Throat, (Neiman


P9275 PUNCHES, TURRET

19 Ton TRUMPF, Trupunch 1000 (2007), Only 3109hrs, Ref#


Fax: 845-398-0074) See Page 6

20 Ton TRUMPF, Trumatic TC3000L (2007), 2KW Truzx 2000,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

20 Ton TRUMPF, TC2020R Rotation (2001), 19 Sta. Rotation,

50"x 100", Ref# 9933, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

22 Ton AMADA, Apelio III 2510VL (2001), Fanuc 160 IL, 2KW

Laser, Under Amp, Ref# 9458, (Jordan Craig Machinery Int’l


22 Ton AMADA, Vipros 2510 King (1999), Fanuc 18P, Ref#


Fax: 845-398-0074) See Page 6

22 Ton MURATEC WIEDEMANN, C2500 (1997), 4 a/i, 12

Station multi-tool, (ECCO Machinery Tel: 877-513-1773,

Fax: 778-298-2024)

22 Ton AMADA, Vipros 255 (1997), Fanuc 18P, 31 Sta., 3A/I,

Ball Table, Ref# 9801, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

22 Ton AMADA, Vipros 255 (1999), Fanuc 18P, 31 Sta., 3A/I,

Ref #10124, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

27.5 Ton TRUMPF, TC5000R-1300 (2005), Sheetmaster,

Tooling, Quick sharp, Quick set, Ref# 9584, (Jordan Craig


See Page 6

33 Ton AMADA, Pega 345Q (2000), Fanuc O4PC, 58 Sta, 2a/i,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

33 Ton AMADA, Pega 357 (1985), Fanuc 6M, 58 Sta, 2a/i, Ref#


Fax: 845-398-0074) See Page 6

33 Ton AMADA, Pega 367 (1992), O4PC, 60"x 72", 44 Sta,

2a/i, Ref# 9987, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

33 Ton AMADA, Vipros 368 King II (2000), Fanuc 18P, CNC

control, Ref# 9963, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

33 Ton AMADA, Vipros III 3510NT (2004), 58 Sta, 4a/i, Ref#


Fax: 845-398-0074) See Page 6

33 Ton AMADA, Vipros 358 King (1995), Fanuc O4PC, Ref#


Fax: 845-398-0074) See Page 6

33 Ton AMADA, Vipros 358 KingII (1999), Fanuc 18P, 4 A/I,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

33 Ton AMADA, Pega 345K (1985), Fanuc 6M, 44 Sta., 2 A/I,

Ref # 10119, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

33 Ton STRIPPIT, 1000MXP/30 (2000), Fanuc OP, 40 Station,

3 A/I, Thin Style, Ref# 10136, (Jordan Craig Machinery Int’l


33 Ton AMADA, EMK3610NT AMNC-F (2008), 60"x 100", Ref#


Fax: 845-398-0074) See Page 6

33 Ton AMADA, Vipros 367 Queen (1999), Fanuc 18P, 58 Sta,

2 A/I, Ref# 10082, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

33 Ton AMADA, Vipros 358 KingII (1999), Fanuc 18P, 4 A/I,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

33 Ton STRIPPIT, 1500H30 (1999), Fanuc 180IP, 60"x 100",

Thick, Ref# 10075, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 6

R4704 ROLLS, ANGLE BENDING

2"x 2"x 3/16" “NEW” TAURING, SAF DS 50HV, Hydraulic,


Fax: 905-669-7512) See Page 4

2"x 2"x 3/16" SAHINLER, (2008), assorted tooling, (Trader


See Page 4

4"x 4"x 3/8" Profile Roll, , Hyd. Side guides, (Ferric Machinery


R5603 ROLLS, PLATE BENDING

LUNA, 4135-12/12, 1260 x 1.2mm cap., (Neiman Machinery

Sales Inc. Tel: 905-715-7776, Fax: 905-715-7744)

3/16"x 4’ Power Rolls, , (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 1

3/16"x 5’ Power Rolls, , (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 1

3/16"x 6.5’ Power Rolls, , (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 1

1/4"x 5’ AKYAPAK, , Mechanical, 3 rollers, call for price,

(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)

1/4"x 8’ , 4 Roll standard, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 1

Latest Installation by FERRIC Machinery

FIBERMAK 3KW Fiber Laser (5ft x 10ft)Baseline Custom Fabricating Ltd., Courtice, ON

Baseline Fabricating is serving the metal industry in the Durham and GTA region since 2004. An industry leader in the custom metal fabricating, constantly upgrading their production facility to maintain the service, quality and efficiency to their clients.The latest addition a FERRIC-Fibermak 3 Kw fiber laser with cutting speeds up to 3 times faster than a CO2 laser on mild, stainless and aluminum, gives an extra competitive edge in order turn around.For cutting needs contact: [email protected]

All FERRIC products are sold with installation and training. Local service by our FERRIC service team.

For more information on the FERRIC-ERMAK products visit:

Westside Service Ltd.4406 58th St S, Lethbridge, AB

Tel: 403-380-5047 [email protected]

FERRIC Machinery Inc.3980 Chadburn Cres, Mississauga, ONTel: 905-820-3232 [email protected]

www.ferr icmachinery.com


1/2"x 10’ AKYAPAK, , Hydraulic, 4 rollers, call for price,

(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)

1/2"x 10’ ROUNDO, PS255 (1997), Ref# 9957, (Jordan Craig


See Page 6

R5605 ROLLS, PLATE BENDING, INIT.

PINCH

1/2"x 10’ ROUNDO, (1997), (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

S0403 SANDERS

36" TIMESAVER, No.137-IHD, Wet type Sander, (Trader


See Page 4

S0653 SAWS, BAND, HORIZONTAL

DO-ALL, C916A, Auto, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 3

13"x 18" WAYTRAIN, , fully auto, swivel, call for price,

(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)

18"x 24" WAYTRAIN, , fully auto, swivel, call for price,

(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)

18"x 24" WAYTRAIN, , semi auto, double swivel, call for price,

(Soudogaz Tel: 418 889-2002, Fax: 418 889-2012)

S0690 SAWS, BAND, VERTICAL

24" STARTRITE, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 3

28" Throat T-JAW, 700C, w/Blade Welder & Grinder, (Trader


See Page 4

14"x 21" DoALL, TF-14X21, 32"x 36" table, 5hp, vertical tilting

frame, (Machinerie Gilles Lupien Tel: 819-478-5266,

Fax: 819-478-5266)

S0948 SAWS, MISCELLANEOUS

4"x 10" ELUMATEC, , Fully Automatic Circular Saw,


Fax: 819-478-5266)

12" Blade IMET, Perfect 300, Cold Saw, (Neiman Machinery

Sales Inc. Tel: 905-715-7776, Fax: 905-715-7744)

14" Blade IMET, Record 350, Pneumatic vise, Cold Saw,


Fax: 905-715-7744)

14" Blade IMET, Record 350, Cold Saw, (Neiman Machinery

Sales Inc. Tel: 905-715-7776, Fax: 905-715-7744)

S4105 SHEARS, POWER SQUARING

1/8"x 10’ ACCURSHEAR, , Hyd, motorized BG, DRO, call for


1/4"x 10’ “NEW” FERRIC, 3100 x 6, CNC Backgauge, (Ferric


See Page 1

1/4"x 10’ HACO, , CNC Back gauge, (Machinery S. Tremblay

Tel: 819-477-6677, Fax: 819-477-6466)

1/4"x 10’ JELSINGRAD, used, w/ Motorized BG, (Ferric


See Page 1

1/4"x 12’ CINCINNATI, 1812 (1967), FOPBG, Ref# 9942,


Fax: 845-398-0074) See Page 6

1/4"x 13.5’ “NEW” FERRIC, 4100 x 6, w/Sheet support system,

auto Back gauge, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 1

3/8"x 14’ ALLSTEEL, , Mot Backgauge, under power in

Montreal., (Boulanger Machinerie Inc Tel: 418-428-4709,

Fax: 418-428-4710)

1/2" x 10’ “NEW” FERRIC, 3100 x 13, CNC Backgauge, (Ferric


See Page 1

3/4"x 10’ ALLSTEEL, , Hyd, motorized BG, Rake & gap, call for


S4256 SHEARS, MISCELLANEOUS

PEDDINGHAUS, Anglemaster 623-M, Punch Tonnage: 80 Ton,

$65,000, (Neiman Machinery Sales Inc. Tel: 905-715-7776,

Fax: 905-715-7744)

T0140 TABLES, ROTARY

12-1/4" KITIGAWA, TS320R, w/Tailstock, 3-7/8"Bore, (Trader


See Page 4

W3054 WELDERS, SPOT

20 KVA SIP, , (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

Z9000 MISCELLANEOUS

Transformers 5 KVA to 1000 KVA, Large Assortment of used,

(Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

Pallet Trucks, (Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

Assorted Fans, (Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

LNS, , Barfeeds, Servo S2 & S3, Late models, w/Remote

pendant, Excellent, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

LYNDEY, , Tool Presetter, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 3

WAHLI, , Tool Presetter, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 3

SUNNEN, MBB-1650, Manual Honing Machine, Asst’d Tooling &

Cabinet, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

ROSCAMAT, R400, Pneumatic Tapping Arm, (Neiman


R5603 ROLLS, PLATE BENDING Z9000 MISCELLANEOUS


MODERN TOOL BC LTD.

New & Used Equipment, Machinery Sales | Toll-Free: 1-800-717-1440

Modern Tool BC LTD. offers an extensive line-up of new and used machine tools, fabricating, sheet metal, and production machinery.

1385 Kingsway Avenue, Port Coquitlam, BC V3C 1S2 | (604) 472-1444 | Toll Free: 1-800-717-1440

DURMA AD-R37175 CNC Hydraulic Press Brake

HYD-MECH S-20A IIIAutomatic Band-Saw

Need your equipment serviced? Our service department is available from Monday to Friday 9am to 5pm

On the web @ www.moderntoolbc.comFollow us on Twitter @ModernToolBC

Service & Parts Sales | Toll-Free: 1-800-717-1440

SCOTCHMAN 6509-24MHydraulic Ironworker

DURMA PBH-180Profile Bending Machine



M A C H I N E R Y

899 Danforth PlaceBurlington, ON L7T 1S1Phone: 905-528-7765

Fax: 905-917-0222

a TOS Varnsdorf company

TOS Trade Canada Inc.415 Industrial Dr.Milton, ON L9T 5A6http://www.tostrade.com

Tel: (905) 878 0888Fax: (905) 878 [email protected]

Call the only local TOS905-878-0888

Table & Floor Type Horizontal Boring MillsHeavy Duty Design

Variety of Sizes

Variety of Equipmnet

Heavy Duty Tables

Independentplatform

Short delivery

New and improved Design

Wide range oftechnological

functions

Competitivepricing

Visit our website for more details:

www.tostrade.com

Clue Machinery - November 2014 Issue

Documents

spindle bore

axis cnc26 x

kit40 x

max swing of bed

spindle rpm

hp power of main motor

wide bed20 x

machine dimensions