MACHINERY APRIL 2016 Volume 31 Number 4 Phone: 905-528-7765 Fax: 905-917-0222 www.cluemachines.com email: [email protected]
M A C H I N E R Y
APRIL 2016Volume 31 Number 4Phone: 905-528-7765Fax: 905-917-0222
www.cluemachines.comemail: [email protected]
Ontario and Eastern Canada:Showroom & Training Centre10 Natura Way, Cambridge, ON N3C 0G7
Western Canada:Westside Service Ltd.122 Broxburn Blvd.Lethbridge, AB T1J 4P4
toll-free # 1-877-337-7424 | [email protected]
www.ferricmachinery.com
Your One Stop Machine ShopIn stock for immediate delivery: Press brakes, Shears, Plate Rolls, Lasers, Saws, Ironworkers, Angle
Notchers, Punch Presses, Plasma Cutting Centers and more..
PROFILE ROLLS
PRESS BRAKES
PUNCH PRESSES
PLASMA CUTTING CENTERS
SHEARS
PLATE ROLLS
FIBER LASERS
16May_Ferric_Bending.indd 1 2016-03-29 4:50 PM
Quality . Service . Value SAWS
Page 2 Clue April, 2016
PRE-OWNED MATSUURA V.PLUS-1000 VERTICAL MACHINING CENTER
YCM TCV3000A-5AF 5 AXES (3+2)
HIGH PERFORMANCE TRAVELING COLUMN VERTICAL MACHINING CENTER
SPINDLE: 12,000 RPM (20/25/29.5 HP) X-AXIS TRAVEL: 3,000mm (118.1”) Y-AXIS TRAVEL: 800mm (31.5”) Z-AXIS TRAVEL: 800mm (31.5”) TABLE SIZE: 3,500 X 800mm (137.8” x 31.5”) B-AXIS (HEAD): +/- 110 degrees C-AXIS (TABLE): 360,000 (0.001 degrees) ATC: 40 POSITIONS
ACCESSORIES: CHIP CONVEYOR 300 PSI COOLANT THROUGH SPINDLE DATA SERVER WITH ETHERNET (4GB) PROBES: RENISHAW NC-4 & RMP-40
PRE-OWNED 2013 MODEL COMMISSIONED IN 2014 WITH ONLY 250 CUTTING HOURS!!
Elliott-Matsuura Canada Inc. 2120 Buckingham Road, Oakville, ON, L6H 5X2
Tel: 905.829.2211 Fax: 905.829.5600 E-mail: [email protected]
Web: www.elliottmachinery.com
VANCOUVER * CALGARY * EDMONTON * WINNIPEG * TORONTO * MONTREAL * QUEBEC
CALL ELLIOTT DIRECT AT 905.829.2211 SPEAK WITH FRANK HAYDAR, FRANK BOLIEIRO, VINCE D’ALESSIO, OR TIM FRANKLIN
PRE-OWNED NAKAMURA WT250IIS MULTI SPINDLES / MULTI TURRETS
12,000 RPM / 30 HP / 40 ATC / TURBO MICROHINGE 500 CHIP CONVEYOR / TSUDAKOMA RZ-160 INDEXER /
FANUC SOFTWARE PACKAGE / HANDYMAN
L&R SPINDLES: 65mm BAR CAPACITY / FIVE AXIS / PARTS CATCHER A / TOOL SETTER / REAR DISCHARGE CONVEYOR / HAINBUCH SPANNTOP COLLET CHUCKS
Ontario and Eastern Canada:Showroom & Training Centre10 Natura Way, Cambridge, ON N3C 0G7
Western Canada:Westside Service Ltd.122 Broxburn Blvd.Lethbridge, AB T1J 4P4
toll-free # 1-877-337-7424 | [email protected]
www.ferricmachinery.com
Your One Stop Machine ShopIn stock for immediate delivery: Press brakes, Shears, Plate Rolls, Lasers, Saws, Ironworkers, Angle
Notchers, Punch Presses, Plasma Cutting Centers and more..
PROFILE ROLLS
PRESS BRAKES
PUNCH PRESSES
PLASMA CUTTING CENTERS
SHEARS
PLATE ROLLS
FIBER LASERS
16May_Ferric_Bending.indd 1 2016-03-29 4:50 PM
Quality . Service . Value SAWS
Clue April, 2016 Page 3
PAGE 4 CLUE, April 2016
63 Maplecrete Road, Concord, Ontario, L4K 1A5 Canada
Tel: (905) 669-7507 ! Fax: (905) 669-7512e-mail: [email protected] ! web: www.tradermachinery.com
AIR COMPRESSORS5hp CAMERON, Piston type25hp DEVILBISS, Piston Type, 575V
BENDERS, HYDRAULIC5-1/2" ENERPAC, Hyd. Pipe bender, w/assisted tooling
BORING MILLS, VERT63"sw TOSHIBA, TMC-13(3), CNC, C-axis w/ Fanuc 32i
BRAKES, PRESS30 to 3000 Ton “NEW” ACCURPRESS Models CNC20 Ton x 4’ WYSONG, Mech. Automec CNC single axis backgauge35 Ton x 6’ ALLSTEEL, No. 35-6, Manual BG45 Ton x 4’ “NEW” ACCURPRESS, S4504, CNC, Y, X, R, Crowning, Laser safety45 Ton x 8’ ALLSTEEL, Automec CNC 99, Single axis backgauge50 Ton x 4’ “NEW” ACCURPRESS, SH5004, Hybrid, CNC Touch screen55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis60 Ton x 8’ ACCURPRESS, No.7608, Autogauge G24 Backgauge, ETS100 Ram65 Ton x 6’ ALLSTEEL, No. 6508 (2001), Automec single axis, BG70 Ton x 10’ ALLSTEEL, Hyd.75 Ton x 10’ “NEW” ACCURPRESS, CNC95 Ton x 8’ ALLSTEEL, Allsteel 2-axis CNC BG100 Ton x 6’ ACCURPRESS, 71006, ETS3000, 3-Axis, X,Y,R110 Ton x 10’ AMADA, RG100 (1998), NC-9EXII Ctrl, Safety lights120 Ton x 8’ ALLSTEEL, CNC, Single-Axis Gauge130 Ton x 10’ “NEW” ACCURPRESS, CNC200 Ton x 12’ “NEW” ACCURPRESS, CNC250 Ton x 12’ “NEW” ACCURPRESS, CNC750 Ton x 16’ CHICAGO, Hyd. CNC Automec 2-Axis, Safety lights, Guarding
DRILLS, COLUMN & BENCH1-3/8"cap “NEW” DRILLMASTER, Z5035, Geared Head
DRILLS, RADIAL3’ arm “NEW” TONE FAN, RD-9003’ arm SUNLIKE, 1500rpm, w/work table4’ arm DARBERT, TF-1100 (2003)9’ arm SHENYANG, Box table
EDM, WIRE NC/CNCX-23.6" Y-15.7" Z-16.5" MITSUBISHI, MV-2400-ST (2013), CNC Wire EDM
GRINDERS, CYLINDRICAL12"x 40" KIKINDA, w/I.D. Grinding
GRINDERS, SURFACE, RECIPROC6" x 18" “NEW” KENT, KGS-2008"x 18" FREJOTH, Automatic, Hyd.10"x 20" ACER, 3-Axis, Fully Auto, Hyd. Coolant12"x 24" OKAMOTO (2007), CNC, Fanuc 21MB
HONESSUNNEN, MBC-1804M & MBC-1802MR, Power Stroke, Horiz.SUNNEN, MBB-1660K, ManualSUNNEN, MBB-1650, Manual, Asst’d Tooling & Cabinet
PRESSES, INSERTION4 Ton HAEGER, w/Stand8 Ton PEMSERTER, Series 2000 (2002), PLC control
IRONWORKERS55 Ton “NEW” MAKO, Universal, 5"x 5"x 3/8" angle
LASERS2000 Watt - 33 Ton AMADA, ApelioIII, 375V, Hyd Punch/Laser Machine5000 Watt TRUMPF, L3050 (2005), 5’ x 10’
LATHES, ENGINE12" x 40" “NEW” MORTON, F1900-AEG (2001), Single Phase13"x 40" HARRISON, Collet chuck, 2-Axis DRO14"x 40" LIBERTY 1300, 6" 3-Jaw18" x 60" “NEW” POWERTURN, 46020"x 48" VDF, 10" 3-Jaw chk63"X 106" BOKO, D82H, Semi-Automatic Spinning lathe
LATHES, N/C & CNCDMG, CTX 410 (2008), Live tool, Fanuc 32, Excellent!HAAS, SL-20T (2005), 8"chk, Part Catch, Chip AugerOKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw, 2" Bar capMORI SEIKI, SL150S (1997)MORI SEIKI, NL2500/700 (2006), MSX850 Control, 10"Chk, live holders, C&Y Mill capHAAS, SL-20 (2005), Live ToolROMI, M17 (2007), 17"x 43", Fanuc 21i, 8"ChkTOOLMEX, TUR560MN-2000 (2012), 22"x 78.7", Siemens 840D, 16" Chk.TOOLMEX, TUR630AMN-3000 (2008), 24.8"x 118", Siemens 840D, 16” Chk.
HYUNDAI, L300 LA (2013), 29.5"SW, 52" Mach. Length, Fanuc Oi-TD, High Accuracy, HighProduction, 12"Chk
MACHINING CTRS, HORZOKUMA, MX-60HB (1997), X-39.37" Y-31.5" Z-31.8", OSP7000
MACHINING CTRS, VERTHAAS, VF1 (2005), X-20" Y-16" Z-20", 15,000 rpmFADAL, VMC40, X-22" Y-16" Z-20", CNC 88 CtrlOKUMA, No.MX-45 VAE (1998), X-30" Y-18.1" Z-17.7", 40 Taper, OSP 700MIKRON, HSM-600U (2006), X-31.4" Y-23.6" Z-19.7", 5-Axis high speedMAKINO, S56 (2007), X-35.4" Y-19.7" Z-17.7", Professional 5 CNC, 13,000 rpmMILLTRONICS, RH20 (2000), X-40" Y-20" Z-24", Centurion 6 controlOKK, MCV-560 (2001), X-41.3" Y-22.04" Z-22.04", Fanuc 16iM, CTS, 50 tap.HURCO (2013), 5-Axis, X-42" Y-24" Z-24"HAAS, VF-5 (2013), X-50" Y-26" Z-32", 50 TaperDAHLIH, MCV-1500 (1996), X-59" Y-24" Z-27", 3500rpmDAHLIH, MCV-1700, X-67" Y-33" Z-29", 3500/6000rpm, 1997
MILLS, VERTICAL9"x 42/48" BRIDGEPORT, w/Fagor DRO9" x 49" "NEW" MAGNUM-CUT, VM-2V, 3hp9"x 49" EXCELLO, 60210"x 50" TOPWELL, No.3VK, 2-Axis Anilam DRO, Power Drawbar10" x 54" "NEW" MAGNUM-CUT, VM-4V, 40 Taper, 5hp12"x 51" TOS, FNK2 (1999), DRO, P/F, V/S
MILLS, VERTICAL, CNC9"x 49" BRIDGEPORT, Acu-Rite MillPower 3-Axis CNC, R8 Taper10"x 50" SOUTHWESTERN INDUSTRIES, TRAK K3 (2002)12"x 51" TOS, FV25 CNC A (2004), 3-Axis, Fagor 800M CNC Ctrl
NOTCHING MACHINES9"x 9"x 1/8" STRIPPIT, Hyd.
PLASMA CUTTING MACHINES100 Amp MESSER MG (2000), 6’x 10’, Hy-Definition, CNC plasma, Metalmaster II
PRESSES, OBI40 Ton BROWN BOGGS, Air Assist Clutch80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x 36"bed
PUNCHES, SINGLE STATION60 Ton FABMASTER (2011), Like new
PUNCHES, TURRET16.5 Ton WIEDEMANN, Centrum 1000Q, w/Tooling, Fanuc OP22 Ton STRIPPIT, 1250/H20 (1998), 197" x 50" Max. sheet size22 Ton TRUMPF, TC2020R (2003), W/ Load & Unload System, Excellent !25 Ton TRUMPF, TC500R/1600 (2001), 60” throat, set of Catridges, Asstd’
tooling, Quicksharp tool grinder25 Ton TRUMPF, TC500/1300, 50"x 100"33 Ton AMADA, 357 Queen (1998)33 Ton AMADA, Vipros 358 King II, 58 Stn, Fanuc 18P33 Ton AMADA, EMK 3610NT (2007)50 Ton WIEDEMANN, Vectrum 5000, 72"x 60", 60" Throat, 54 Stn, tooling
ROLLS, ANGLE BENDING2"x 2"x 3/16" "NEW" (Demo) TAURING, SAF DS 50HV, Hydraulic2.2"x 2.2"x 1/4" TAURING, SAF DS 60 HV6"x 6"x 1/2" PULLMAX, Z43, Hydraulic, Pendant Control, Digital Readout
ROLLS, PLATE BENDING1.575"x 10" MG, Hyd, 4-Roll1"x 10’ PULLMAX, PV7H, Hyd., 3-Roll Double Pinch3/4"x 10' BERTSCH (2005), Hydraulic
SAWS, BAND, HORIZONTAL9"x 16" DOALL, Semi-Auto10"x 15" "NEW" ACRA, Speeder FHBS-250V10"x 16" JAESPA, Semi-Auto12"x 14" RAM, Semi-Auto
SAWS, BAND, VERTICAL20" throat CLAUSING STARTRITE, No.20V
SHEARS, POWER SQUARING1/4"x 10’ "NEW" ACCURSHEAR, No.6250103/8"x 8’ ACCURSHEAR (1998), Hydraulic
MISCELLANEOUSBarfeeder SPACESAVER, 4’ SMW, Autoload 12.65Barfeeds LNS, Servo S3, (2007 & 2013) w/Remote pendantGundrill ELDORADO, M75-1041, 3/4" x 30"Threader RIGID, Model 535, some toolingSanding/Deburring Machine, 37" MIDWEST, (2014), w/ Dust CollectorSpot Welder 15 KVA, WELDOMATIC, 24" throat, 575VWire Machinery "NEW" METALEX, WT250, Wire Nibbler
NEW
Page 4 Clue April, 2016
WE BUY SINGLE MACHINES OR COMPLETE PLANTS
63 Maplecrete Rd.Concord, Ontario L4K 1A5Tel: (905) 669-7507Fax: (905) 669-7512www.tradermachinery.com
HAAS, VF-1D, 2005, 20”X, 16”Y, 20”Z,Vert. Mach. Center, 15,000 rpm
HAAS, SL-20T, 2005,CNC Turning Center,
NEW Accupress CNC Hydraulic Press Brakesavailable from stock
TRUMPF, 5000 Watt, 5’ x 10’, 2005,Siemens 840D Control
22 Ton, TRUMPF, TC2020R, 2003, With Load & Unload System, Full set of Cartridges, Excellent !
HAAS, No, SL-20, 2005, With Live Tooling, C-Axis, Excellent !
100 Ton x 6’, ACCURPRESS, No. 71006, ETS3000, 3-Axis Control, X, Y, R
12” x 51” TOS, No. FV25 CNC A,Fagor 800M, 3-Axis CNC Control
Clue April, 2016 Page 5
MASTEEL AMERICA CORP.
Vancouver Head Office: Unit 120, 7490 MacDonald Road, Delta, B.C. V4G 1N2 Tel: 800-813-4434 Edmonton Office: 854 78 Ave NW, Edmonton, AB, T6P 1L7 Tel: 780-466-4693 Toronto Office: 1775 Meyerside Drive, Unit 3, Mississauga, Ontario, L5T 1A3 Tel: 905-670-4434
MASTEEL AMERICA CORP.
www.masteels.com
MAXCUT CNC HORIZONTAL BORING MILLS
CNC HORIZONTAL BORING MILLS
Fixed column or T-type design 110 mm, 130 mm and 150 mm diameter spindles Spindle speeds to 3000 rpm Rotary Table or Planer table or Combination table Table lengths to 6000 mm X-axis travels to 6200 mm Y-axis travels to 3000 mm Table capacity to 50 t Cast iron construction Box ways (on X & Y-axis) Linear scales on X, Y and Z-axis standard 40 position tool magazine standard Chip conveyor and bin standard Table splash guard standard Universal index head option CNC Facing head option FANUC, FAGOR of HEIDENHAIN CNC
PRICES START AT:
U.S. $ 375,000 Some models available from
stock
Page 6 Clue April, 2016
Clue April, 2016 Page 7
Page 8 / Steel Marketplace / JULY 2007
�
• APPRAISALS • FINANCING • • TRADE-INS • TOOLING •
• SHIPPING • INSTALLATIONS • • TRAINING • SOFTWARE •
VISIT US AT:www.jordancraigmachinery.com
TO VIEW A COMPLETE LIST
Check out our website for Photos, Specifications and a more complete inventory atwww. jordancraigmachinery.com
JORDAN CRAIG MACHINERY INT’L LLC, P.O Box 737, New City, NY 10956Tel: 845-398-0073 [email protected]: 845-398-0074 www.jordancraigmachinery.com
4000 WATT AMADA FOMII 3015NT LASER MFG:2012, STOCK #10395
257 TON, TRUMPF TRUMABEND V230, BRAKE PRESS, DELEM DA69 6-AXIS, CLAMPING, CROWNING, MFG:2004, STOCK #10404
33 TON, AMADA, EMK3610NT AMNC-F,TURRET PUNCH, 60” X 100”,MFG:2007, STOCK #10361
AMADA,GEMINI FO-3015NT, 4,000 WATT, LASER, 5’X10’, APPROX HRS: 45,000
MFG:2005, STOCK #10402
22 TON, STRIPPIT, V20 1525 FANUC 180I,TURRET PUNCH, 60” X 80”, 34 STATION,
4 A/I, MFG:2011, STOCK #10413
88 TON, AMADA, RG-8024LD, BRAKE PRESS, 2-AXIS CNC, MFG:1999 STOCK #10425
AMADA 6KW LC-3015F1NT, LASER,5’ X 10’ DUAL PALLET
MFG: 2011, STOCK #10114
33 TON, AMADA, VIPROS 358 KINGII, TURRET PUNCH, FANUC 18P, 4 A/I.MP1225NJ LOAD/
UNLOAD, MFG:1999, STOCK #10383
33 TON, AMADA, PEGA 357, TURRET PUNCH, FANUC 04PC, 58STA., 2 A/I,MFG:1994, STOCK #10429
AMADA FO MII RI 3015, 4000 WATT, LASER,5’ X 10’ ROTARY INDEX,
MFG:2012, STOCK #10320
143 TON, AMADA, HDS-1303NT, BRAKE PRESS, AMNC-PC 8-AXIS,
MFG:2006 STOCK #10426
22 TON, AMADA EM2510NT, TURRET PUNCH, AMNC NT CNC, 45 STATION 4 A/I,
MFG:2004 STOCK #10451
Z9000 MISCELLANEOUS Z9000 MISCELLANEOUS
PAGE 22 CLUE, April 2012
MACHINERY ADVERTISER
PUBLISHER
David Stapleford
PRINTED BY:
Ricter Web Printing
DELIVERY
Clue is delivered monthly and is sent bythird class mail on or before the businessday following the seventh of each month
DEADLINE
The deadline for advertising is the dayfollowing the last Wednesday of the month
ADDRESS
343 Smith AveBurlington, ON, L7R 2T9
Phone: 905-528-7765Fax: 905-917-0222
www.cluemachines.com
e-mail: [email protected]
MUST SELL
Cincinnati 10ga x 10'
Power Squaring Shear
Bliss #21
Punch Press
Contact: TCL Asset Group Inc.Ph: 416-736-1367 x228
Website: www.managingyourassets.com
Alberta
B F G Machine Tools Inc., Edmonton (Brian) ...................................780-434-7795........780-436-0717 .......15
British Columbia
ECCO Machinery, Surrey (Rick) ......................................................778-298-2023........778-298-2024 .......17
Modern Tool (BC) Ltd, Port Coquitlam (Pam) ..................................604-472-1444........604-472-1455 .......16
Ontario
Brighton Machinery Sales Inc, Ingersoll (Brian) ...............................519-485-7089........519-485-7368 .......15
Cameron Steel, Lindsay (Bob) ........................................................705-878-0544........705-878-0560 .......21
Compumachine Canada, Toronto (Peter).........................................416-291-9499........416-291-4990 .......22
Corporate Assets Inc, Toronto (Daphne) .........................................416-962-9600........416-962-9601 .......27
Dipaolo CNC Retrofit Ltd., Mississauga (Nelson) ............................905-676-9265 ......................................10
Fabtec Machine Tool Solutions Inc, Oakville (Raj)............................905-469-1586........905-469-3054 .......18
Ferric Machinery Inc, Mississauga (Koen) ......................................877-337-7424........905-820-3234 .........3
Haco Canada, Mississauga (Francis)..............................................905-828-1087........905-828-2062 .......26
Havlik Int’l Machinery, Cambridge (John) ........................................519-624-6240........519-624-4119 .......13
Hayden Lee, Markham (Hayden) ....................................................905-201-7841........905-201-7842 .......14
Hove Machine Services, Wasaga Beach (David) .............................705-429-5910........705-429-1557 .......15
Infinity Assets Solutions, Concord (Leslie) ......................................905-669-8893........905-669-7512 .........2
L S Walker Machine Tools Inc, Milton (Chris) ..................................905-876-0890........905-876-1959 .......12
Machine Solutions Inc., Guelph (Andrew) .......................................416-276-0596 ......................................25
Micro Trend Robotics Inc, Pickering (Peter) ....................................905-509-1218........905-509-2687 .......15
Nimesch Machinery, Markham (George) .........................................416-786-7762........905-415-3868 .........1
Nova International, Mississauga (Richard) ......................................905-624-4522........905-624-1917 .......15
Park Thermal International, Georgetown (Sales) ..............................905-877-5254........905-877-6205 .......15
Phase Quest, Mississauga (Harold) ................................................416-578-5399........416-753-7209 .......15
Powermaster Machinery Ltd, Mississauga (Peter)...........................905-624-9327........905-624-8591 .........5
S K Braly Machinery Inc, Mississauga (Steve) ................................905-793-8080........905-793-2190 .......23
Sabito Machinery Inc, Vaughan/Concord (David) ............................905-738-8730........905-738-5148 .........4
Stan Canada Machinery & Equipment Ltd, Brampton ......................416-252-5767........416-252-4770 .......15
TOS Trade Canada Inc., Milton (Marian)..........................................905-878-0888........905-878-9022 .......28
Trader Machinery Inc, Concord (Jonathan) .....................................905-669-7507........905-669-7512 .........6
Quebec
Boulanger Machinerie Inc, St-Ferdinand (Ben).................................418-428-4709........418-428-4710 .......15
Camex Machinery, Montreal (Elias).................................................514-581-5370........888-414-6441 .......17
Machinerie Gilles Lupien, Drummondville (Gilles)............................819-478-5266........819-478-5266 .......23
Machinery S. Tremblay, Drummondville (Sylvain)............................819-477-6677........819-477-6466 .......15
Soudogaz, St-Lambert de Lauzon (Charles)....................................418 889-2002 ........418 889-2012........25
Stock Machine Tools Co, Laval (Andre) ..........................................514-326-7006........514-329-2599 .......15
USA
Jordan Craig Machinery Int’l Inc, New City, NY (Jordan)..................845-398-0073........845-398-0074 .........8
S R I Advertising, Encino, CA (Susan) ............................................818-761-1792........818-793-0351 .......25
Y.Franke & Company, LLC., Hoffman Estates, IL (York)....................847-874-8972........847-596-8006 .........9
COMPANY PHONE FAX PAGE
ADVERTISERS DIRECTORY
New & Used Fabricating Machinery for Over 39 Years
2 TON ALVA ALLEN, OBI, #B2, 1/3 HP, 110 V - $2,150.00 (2)2 TON ALCECO, OBI, #2IP, 1/3 HP, 110 V - $2,150.002 TON BENCHMASTER, OBI, #2, 1/2 HP, 110 V - $1,850.003-1/2 TON ALCECO, OBI, DEEP THROAT, 110 V - $2,500.004 TON ALCECO, OBI, # 4IP, 1/3 HP, 550 V - $2,250.00 (6)4 TON ALCECO, OBI, #4IP, 1/3 HP, 110 V - $2,250.00 (2)4 TON ALCECO, OBI, #4SP, 9” SH, 1/3 HP, 110 V - $2,950.00 (2)4 TON BENCHMASTER, OBI, #451, 1/3 HP, 110 V - $2,250.004-1/2 TON FAMCO, OBI, #50A, 1/4 HP, 550 V - $2,150.00 (2)5 TON ALVA ALLEN, OBI, #BT5, 1/3 HP, 110 V - $2,250.00 (4)5 TON BENCHMASTER, OBI, # 152, 1/3 HP, 110 V - $2,250.005 TON ROUSSELLE, OBI, #OE, 1/3 HP, 110 V - $2,450.006 TON ALCECO, OBI, #6IP, 1/2 HP, 550 V - $2,950.006 TON AZIMUTH, OBI, #6IP, 1/2 HP, 550 V - $2,950.006 TON AZIMUTH, OBI, # 6IP, 1/2 HP, 110 V - $2,950.0010 TON AZIMUTH, OBI, #10IP, 1 HP, 550 V - $3,500.0010 TON ROUSSELLE, OBI, #1A, 3/4 HP, 110 V - $2,950.0015 TON ROUSSELLE, OBI, #2, 1 HP, 550 V - $2,950.0015 TON ROUSSELLE, DEEP THROAT, # 2G, 1 HP, 550 - $3,500.0020 TON BLOW, OBI, #2, 1 HP, 550 V - $2,850.0022 TON ALCECO, OBI, #22IP, 2 HP, 550 V - $3,950.0025 TON ROUSSELLE, OBI, #3, 2 HP, 550 V - $4,250.00 50 TON BROWN BOGGS, OBI, #16, 5 HP, 550 V - $5,500.0050 TON BROWN BOGGS, OBI, A/C, PALMS/FOOT, 5 HP - $15,500.0070 TON STANKO, OBI, A/C, PALMS/FOOT, 5 HP, 550 - $15,500.00
LARGEST INVENTORY OF SMALL USED PUNCH PRESSES IN CANADA!
STEVENS MACHINERY SALES (2005) INC.2 Royalcrest Road, Etobicoke (Toronto) ON, M9V 2L5
Phone: (416) 798-3611 Toll Free: 1-866-798-3611www.stevensmachine.com • Email: [email protected]
• Reach more people faster• Email over 5000 companies using CLUE’s highly targeted industry list• Save on the second blast• Feature your machine in our monthly newsletter
www.cluemachines.com
Call today: 905-528-7765 oremail us at: [email protected]
Over 5000 Names
CLUE MACHINERY ADVERTISER ONLINE
Great forAuctions
Single MachinesMultiple MachinesPlant Real Estate
M A C H I N E R Y
EMAILBLAST
Page 8 Clue April, 2016
7055 Auburn Rd., Milton, ON L9T 7V9Ph: (905) 876-0890 Fax: (905) 876-1959
Email: [email protected]: www.walkermachinery.com
FEELER FTC-10CNC lathe
BORING MILLS, CNC, HORZ, FLOORUNION BFP 130 CNC, 5.12", (1994) 120"x 275", Heidenhain ctrlBORING MILLS, HORZ, TABLETOS WHN 13, CNC, 80” x 137“ travel, 1996, Heidenhain 426 control4” TOS W100A, 44”x63”x63” trvls, 50 tpr, 4-axis DRO, new paint!, 19814” TOS W100A, 44”x63”x63” trvls, 50tpr, 4-axis DRO, new paint!, 19864“ TOS W100A, (2014) Remanufactured, 50 tpr spindle factory rebuilt to new tolerance, 5-axis Heidenhain DRO4” UNION CNC point to point, 44”x40”x63” trvls, TNC 135 Heidenhain control, very nice condition!4“ TOS W100A, 44"x 63"x 63" trvls, 4-axis DRO 49"x 49" rotary table, new 19964.3” TIGERCUT 110 CNC, 63"x 86" travels, Fagor CNC 1 degree index table, new 2005BORING MILLS, VERT72” G&L, CNC, 12 ATC, live tools, Refurbished 2009 Fanuc 21i ctlDRILLS, RADIALMAS VR 8A x 2500, 3" capLATHES, ENGINEChein Yeh, 20”x60”, 4-way toolpost, steady & follow rest, 3.25” bore, new paint!VDF 25”x120”, quick change toolpost, steadies, follow rest, 3 & 4 jaw chk, excellent!TOS SN 63C, 25”x157”, 4-way toolpost, steadies, new 1998TACCHI, 50"x 315", (1973) Steadies, follow rest, 4-jaw chuckPOREBA TCG 160, 63"x 393", As New!NILES, 70"x 315", 3-bedway design, pendant control on carriage heavy dutyLATHES, N/C & CNCMORI SEIKI SL-6 CNC, 50hp motor, Fanuc 6T control, 15"chk new 1981Feeler FTC 10 CNC, yr 1998, Fanuc control, 6” chk, chip conveyor, 8 sta. turret
MACHINING CTRS, HORZNIIGATA HN 80 FC, 32"x 32" pallets, Fanuc 11m control, 6 pallet pool built in facing head and in/out spindle movement for boring mill applications, 120 ATC, new 1992MILLS, UNIVERSALTOS FGS 63T plus, 25"x 71", (2002) 3-Axis DRO, Variable speeds/feeds pendant ctl, 50 tpr, unv headZAYER 66MB, 28"x 80", 3-Axis DRO, Unv head, pendant ctl variable speeds/feedsMISCELLANEOUS50 plastic automotive skids, 45"x48" pallet - 4 way pick upCast Iron Floor Plates, 157" x 74" x 16" 2 AvailablePortable Drilling Unit, CLIMAX KM 3000Rotary Table, TOS ISO 16, 86"x 86", 60" Travel, 17 Ton, Rotary & Linear DRO
20Years
MODERN TOOL BC LTD.
New & Used Equipment, Machinery Sales | Toll-Free: 1-800-717-1440
Modern Tool BC LTD. offers an extensive line-up of new and used machine tools, fabricating, sheet metal, and production machinery.
1385 Kingsway Avenue, Port Coquitlam, BC V3C 1S2 | (604) 472-1444 | Toll Free: 1-800-717-1440
DURMA AD-R37175 CNC Hydraulic Press Brake
HYD-MECH S-20A IIIAutomatic Band-Saw
Need your equipment serviced? Our service department is available from Monday to Friday 9am to 5pm
On the web @ www.moderntoolbc.comFollow us on Twitter @ModernToolBC
Service & Parts Sales | Toll-Free: 1-800-717-1440
SCOTCHMAN 6509-24MHydraulic Ironworker
DURMA PBH-180Profile Bending Machine
Clue April, 2016 Page 9
• Reach more people faster
• Email over 5000 companies using CLUE’s highly targeted industry list
www.cluemachines.com
Call today: 905-528-7765 or email us at: [email protected]
Over 5000 Names
CLUE MACHINERY ADVERTISER ONLINE
M A C H I N E R Y
LET US MANAGE YOUR MACHINES ONLINE
Page 10 Clue April, 2016
SYLVAIN TREMBLAY MACHINERY
NICHOLAS COREA, Table 43”x117”, ISO 50, Speed
20-2000, Heid. 3-Axis
TARNOW Lathe, TUJ50MX2000,1995, Fully Equipped, DRO
LEPONT Lathe (Italy), 40” x 16’,4.5” Spindle Bore, DRO
KONE 15TM (2 x 7.5TM) x 36', 25’ Lift, Mint Condition
2 x 7.5 TM hoist KONE
MUST BE SOLD
CNC Lathe, HURCO TM8, 2010, 23.5”x18.8”, Bar 2”, Chuck 8”,
Control WINMAX, 15hp
Roto-Die 10', model 10,mint condition
Universal milling GAMBIN, 3M,15” x 60”, 40 Taper
Contact: Sylvain Tremblay • Cell: (819) 314-4967 • [email protected]
KINGSLAND, 175 Tons, Secured, Tooling
TOS, SN71, 28''x157'', taper,full equip, DRO Acurite
PAGE 30 CLUE, December 2013
AIR COMPRESSORS
JUN AIR 15 litre 120psi
QUINCY 5hp
HUSKY (Pro) 5hp 80 gallon tank
DEVILBISS 5hp
WEBSTER 30hp 200 gallon tank
DRILLS
CANADIAN BUFFALO 1/2"
BUFFALO
ALLEN drill press, 3ph
ARBOGA Gearhead Drill
DoALL Gearhead drill, swivel
ARBOGA (G1304) Bench top drill
HERBERT 15" 3ph
CINCINNATI BICKFORD 24"
FORK LIFT TRUCKS
BLUE GIANT 1500lb die lift
TCM 5000lb propane, 4 stge mast, side shift
TCM 10,000lb Propane, 3stge mast
Assorted Pallet Trucks
HYSTER 15,000lb propane, 3stge mast, side
shift
GRINDERS
FORD SMITH pedestal grinder
THOR Pedestal grinder
JONES & SHIPMAN Surface Grinder 540,
550v, 3ph
J&S 6"x 18" automatic surface grinder
LATHES
TOS (SV18RA) 15"x 60"
COLCHESTER 16"x 60"
VOEST 17"x 60"
(LC360B) 360"x 1000"
MILLS
HONEYWELL Light curtains
BRIDGEPORT (J series) 9"x 32"
CINCINNATI 11"x 54" Vertical
TOS (FNK25A) 11"x 65"
TOS (FA3AV) 12"x 54" 40 taper
PRESSES
ARBOR (#2)
GREENERD (#3a) Arbor Press
ALGOMA 50T H Press, 575v, 3ph
BUFFALO 100T H press
SAWS, BAND, HORIZONTAL
WELLS (V-12)
STARTRITE (H225) 10"x 16"
TURN-PRO 10"x 17"
RAM 12"x 16"
SAWS, BAND, VERTICAL
RIGID (MS1065LZA) 10" compound mitre saw
CLIPPER (BBC156) 14" Concrete saw
ROCKWELL 14"
MAKITA 14" Chop saw, single phase
MEP (Rabbit 351) 14" Cold cut saw
WELDERS
MILLER (650) Mig welder w/ double feeder
AERCOLOGY’S WELDAIR (WA1000CP)
Smoke eater
THERMAL ARC (PAK 5Xr) Plasma cutter
MILLER (Coolmate 4) Water cooler
ARCWELD (G022263) 230/460/575
Smoke Eater, NEDERMAN
LINCOLN (CV-300)
THERMALARC (250 Tigwave)
CANOX Arc Welder
L-TEC Heliarc 250hf plus squarewave
MILLER (Big 50) Diesel welder, 400 amp
MEMCO (Stick AC-225) single phase
MISCELLANEOUS
Assorted Transformers
Hydraulic Pump
Industrial Fan, VARY 4’ x 4’
MITUTOYO height gauges, assorted sizes
Assorted Rotary Tables
Mag. Lathe Chuck, ECLIPSE
Belt sander, KALAMAZOO 6" Pedestal
Assorted Demagnetisers
Bead Rolling Machine, CMZ7, 114v, single
phase
Pressure Washer, PSC 600v, 3ph
Assorted Measuring Tools
Belt Sander, BROOK HANSEN 6"x 80"
Pipe Vise Stands, (2) PILOT (No.20)
Angle Plates
Torque Wrench, PROTO 600 ft/lbs
Collet sets
Assorted vises
Assorted Chain Hoists
Tri Vise, RIGID
Magnets, 800-1000kg
Air Hoist 2T
Hardness Testers
JET & CM 10T chain falls, 20’ lift
Bore Gauge, SUNNEN (Dial)
Tri Vise, RIGID
RIGID Tooling for threading machine
Phone: 905-634-8442 Fax: 905-681-69404280 Harvester Road, Unit 5 & 6, Burlington, Ontario, L7L 5Z5
www.paulmachinery.com
Clue April, 2016 Page 11
A2450 AIR COMPRESSORS
25hp DEVILBISS, , Piston Type, 575V, (Trader Machinery Inc.
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
B1804 BENDERS, HYDRAULIC
5-1/2" ENERPAC, , Hyd. Pipe bender, w/assisted tooling,
(Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
B5500 BORING MILLS, HORZ, TABLE
TOS, W-100A (1987), Excellent Condition, $64,500,
(Machinerie Gilles Lupien Tel: 819-478-5266,
Fax: 819-478-5266)
TOS, WHN 13, S/N 04-18, Installed new 1996, Spindle 5.12",
ISO #50, Cross trvl:138", Vert:78", 50 hp, Fanuc 16M, CNC
rot. tbl 63" X 70", (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266)
B6985 BRAKES, HAND
16ga X 10’ BROWN & BOGGS, , $3,000, (Machine Solutions
Inc. Tel: 416-220-5910 See Page 1
B7000 BRAKES, PRESS
15 Ton x 4’ CHICAGO, , Mechanical, $1,900, (Machine
Solutions Inc. Tel: 416-220-5910 See Page 1
20 Ton x 4’ ALLSTEEL, , Hydraulic, $5,500, (Machine
Solutions Inc. Tel: 416-220-5910 See Page 1
20 Ton x 4’ WYSONG, , Mech. Automec CNC single axis
backgauge, (Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
35 Ton x 6’ ALLSTEEL, No. 35-6, Manual BG, (Trader
Machinery Inc. Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
35 Ton x 6’ TRI-ACRO, 35-6 (1993), Hydra-Mechanical,
Hurco 5C, Ref# 10204, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
45 Ton x 4’ “NEW” ACCURPRESS, S4504, CNC, Y, X, R,
Crowning, Laser safety, (Trader Machinery Inc.
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
45 Ton x 8’ ALLSTEEL, , Automec CNC 99, Single axis
backgauge, (Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
55 Ton AMADA, FBDIII5020NT (2000), “Up-Acting” 7-Axis NT
Control, Ref# 10355, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
55 Ton AMADA, RG50 (1999), Hurco Autobend 7, 2-Axis,
Ref# 10354, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
55 Ton AMADA, FBD5020 (1989), NC9EXII 3-Axis CNC,
78.74" O.A., Ref# 10391, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
55 Ton TRUMPF, V50 (2001), Prog. Z1,Z2, Clamping, Ref#
10417, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis, (Trader
Machinery Inc. Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
60 Ton x 6’ CINCINNATI, 60CBII4 (1997), 2-axis CNC Back
Gauge (Upgrade), Ref# 10370, (Jordan Craig Machinery
Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
60 Ton x 8’ ACCURPRESS, No.7608, Autogauge G24
Backgauge, ETS100 Ram, (Trader Machinery Inc.
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
65 Ton x 6’ ALLSTEEL, No. 6508 (2001), Automec single
axis, BG, (Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
70 Ton x 10’ ALLSTEEL, , Hyd., (Trader Machinery Inc.
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
72 Ton TRUMPF, Trubend 3066 (2008), 4-Axis, 2700 Hours,
Ref# 10286, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
75 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader
Machinery Inc. Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
88 Ton AMADA, FBDIII8025NT (2001), AMNC-PC, Ref#
10340, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
88 Ton AMADA, RG80 (2000), NC 9EXII 3-axis, Ref# 10033,
(Jordan Craig Machinery Int’l Inc. Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
88 Ton AMADA, Astro 100M (2001), FBDIII-8025, Sold NEW
in 2004, Ref# 10192, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
88 Ton AMADA, RG-8024LD (1999), 2-Axis CNC, Ref#
10425, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
88 Ton x 98.6" AMADA, FBD 8025F (1992), “Up-Acting”,
NC9F Control, Ref# 10356, (Jordan Craig Machinery Int’l
Inc. Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
90 Ton CINCINNATI, 90AFX10 (2000), AutoForm 6-Axis,
Crowning, 12’ O.A., Ref# 10392, (Jordan Craig Machinery
Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
93.5 Ton TRUMPF, Trubend 5085 (2011), 6-Axis BG, Ref#
10322, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
95 Ton TRUMPF, V85 (1997), Delem Prog. Z1 & Z2, Ref#
10418, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
100 Ton TOYOKOKI, HYB 1003 (1998), 10’ O.A.,5-Axis,
European Style Tooling, Ref# 10405, (Jordan Craig
Machinery Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
100 Ton x 6’ ACCURPRESS, 71006, ETS3000, 3-Axis, X,Y,R,
(Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
110 Ton AMADA, Astro 100NT (2004), HDS1030, Robotic
bending cell, Ref# 10203, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
110 Ton x 8’-6’ “NEW” FERRIC, , Ferric PB Pro Falcon
2600x100, XR Back gauge, CNC crown, 2D graphic, (Ferric
Machinery Inc. Tel: 877-337-7424, Fax: 905-820-3234)
See Page 2
110 Ton x 10’ AMADA, RG100 (1998), NC-9EXII Ctrl, Safety
lights, (Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
110 Ton x 13.5’ GASPARINI, EFB 4100x105, XR Backgauge,
CNC Crown, DNC angel prog., (used), (Ferric Machinery
Inc. Tel: 877-337-7424, Fax: 905-820-3234) See Page 2
120 Ton ACCURPRESS, Edge 412012 (2015), 6-Axis Vision
CNC, Ref# 10415, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
120 Ton x 12’ ALLSTEEL, , Hurco CNC, $18,000, (Machine
Solutions Inc. Tel: 416-220-5910 See Page 1
130 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader
Machinery Inc. Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
137 Ton AMADA, HFB1254/5, NEW 1995, Operateur CNC,
165", Ref# 10214, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
138 Ton AMADA, FBD1253NT (1999), Up-Acting CNC, Ref#
10385, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
138 Ton AMADA, FBD1253NT (2003), Up-Acting CNC, Ref#
10389, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
143 Ton AMADA, HDS-1303NT (2006), AMNC-PC 8-Axis,
Ref# 10426, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
PAGE 16 CLUE, April, 2016
CLASSIFIED -LISTING YOUR MACHINERY AND EQUIPMENT TODAY
LEADS TO SUCCESSFUL SALES TOMORROW
Don't Delay! Phone: (905) 528-7765 Fax: (905) 917-0222
USED PRESS BRAKE WARCOM, CNC 6 AXIS+CROWNING, COMPLETELY SECURE
Must
be Sold
125TM x 4 meters (13’-6’’)
Contact Sylvain Tremblay Ph: 819-477-6677Em: [email protected]
Page 12 Clue April, 2016
CLUE, April 2014 PAGE 17
B7000 BRAKES, PRESS G4706 GRINDERS, CYLINDRICAL
143 Ton AMADA, HDS-1303NT (2005), AMNC-PC 8-Axis,
Ref# 10446, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
144 Ton TRUMPF, V130 (1997), Delem Prog. Z1 & Z2, Ref#
10419, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
146 Ton AMADA, HFE 1303 M2 (2010), Ref# 10435, (Jordan
Craig Machinery Int’l Inc. Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
150 Ton x 10’ “NEW” FERRIC, Speed Bend Pro, 3100x135,
XRZ1Z2 back gaug, CNC crown, 2-3D prog. off line
software, (Ferric Machinery Inc. Tel: 877-337-7424,
Fax: 905-820-3234) See Page 2
165 Ton x 12’ HACO, ERM 36150, 6 axes CNC BG, CNC,
Crown, AKAS Laser BC59, 2D Graphic (used), (Ferric
Machinery Inc. Tel: 877-337-7424, Fax: 905-820-3234)
See Page 2
165 Ton x 12’ HACO, ERM 36150, CNC backgauge, ATS560
ctrl & tooling (used), (Ferric Machinery Inc.
Tel: 877-337-7424, Fax: 905-820-3234) See Page 2
170 Ton x 12’ VERSON, , Mechanical, (Machine Solutions
Inc. Tel: 416-220-5910 See Page 1
175 Ton x 12’ ACCURPRESS, Advantage 717512 (2004),
ETS3000 3-Axis, Ref# 10273, (Jordan Craig Machinery Int’l
Inc. Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
175 Ton x 12’ “NEW” TOSKAR, , CNC 4-axis Touch graphic
Manual crown tooling, quick release clamping, (Machine
Solutions Inc. Tel: 416-220-5910 See Page 1
193 Ton x 10’ “NEW” FERRIC, , PB Pro Falcon 3100x175, XR
Back gauge, CNC crown, 2D graphic, (Ferric Machinery
Inc. Tel: 877-337-7424, Fax: 905-820-3234) See Page 2
193 Ton x 12’ “NEW” FERRIC, , PB Pro Falcon 3760x175, XR
Back gauge, CNC crown, 2D graphic, (Ferric Machinery
Inc. Tel: 877-337-7424, Fax: 905-820-3234) See Page 2
200 Ton x 12’ “NEW” ACCURPRESS, , CNC, (Trader
Machinery Inc. Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
220 Ton x 13’ FISHER, , XR BG, CNC Crown Cybelec
DNC900 control, (used), (Ferric Machinery Inc.
Tel: 877-337-7424, Fax: 905-820-3234) See Page 2
242 Ton x 12’ “NEW” FERRIC, , PB Pro Falcon 3760x220, XR
Back gauge, CNC crown, 2D graphic, (Ferric Machinery
Inc. Tel: 877-337-7424, Fax: 905-820-3234) See Page 2
242 Ton x 12’ “NEW” FERRIC, SB Pro 3760x220, XRZ1Z2
backgauge, CNC crown, ER90 Plus 2D-3D offline incl.,
(Ferric Machinery Inc. Tel: 877-337-7424,
Fax: 905-820-3234) See Page 2
250 Ton x 12’ “NEW” ACCURPRESS, , CNC, (Trader
Machinery Inc. Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
257 Ton TRUMPF, Trumabend V230 (2004), Delem DA69
6-Axis, Clamping, Crowning, Ref# 10404, (Jordan Craig
Machinery Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
350 Ton x 12’ “NEW” FERRIC, , PB Pro Falcon 3760x350, XR
Back Gauge, CNC Crown, 2D graphic, (Ferric Machinery
Inc. Tel: 877-337-7424, Fax: 905-820-3234) See Page 2
40-400 Ton x 5-16’ “NEW” TOSKAR, , Hydraulic, (Machine
Solutions Inc. Tel: 416-220-5910 See Page 1
400 Ton x 17’ CINCINNATI, , Mechanical, (Machine Solutions
Inc. Tel: 416-220-5910 See Page 1
600 Ton x 16’ ALLSTEEL, , Hydraulic, $27,000, (Machine
Solutions Inc. Tel: 416-220-5910 See Page 1
750 Ton x 16’ CHICAGO, , Hyd. CNC Automec 2-Axis, Safety
lights, Guarding, (Trader Machinery Inc.
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
1750 Ton PACIFIC, Fabri-K 1750-40/36 (2007), Cybelec
8805, Ref# 10242, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
D0654 DEBURRING MACHINES
37" MIDWEST, (2014), w/ Dust Collector, Sanding/Deburring
Machine, (Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
D5700 DRILLS, RADIAL
3’ Arm SUNLIKE, , 1500rpm, w/work table, (Trader Machinery
Inc. Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
5" BERGONZI, TM50/1600, (Powermaster Machinery Ltd.
Tel: 905-624-9327, Fax: 905-624-8591) See Page 18
F5006 FURNACES
Heat Treating , New & Reconditioned, Powered by Electric,
Gas, Oil, Propane, for all purposes, (Park Thermal
International Tel: 905-877-5254, Fax: 905-877-6205)
G4706 GRINDERS, CYLINDRICAL
12"x 40" KIKINDA, , w/I.D. Grinding, (Trader Machinery Inc.
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
Clue April, 2016 Page 13
G8025 GRINDERS, SURFACE, RECIP. L0850 LASERS
PAGE 18 CLUE, April 2014
G8025 GRINDERS, SURFACE, RECIP.
8"x 18" FREJOTH, , Automatic, Hyd., (Trader Machinery Inc.
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
8"x 20" JONES & SHIPMAN, , $1,900, (Machine Solutions
Inc. Tel: 416-220-5910 See Page 1
10"x 20" CHEVALIER, , (Powermaster Machinery Ltd.
Tel: 905-624-9327, Fax: 905-624-8591) See Page 18
H6004 HONES
SUNNEN, , MBC-1804M & MBC-1802MR, Power Stroke,
Horiz., (Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
SUNNEN, MBB-1660K, Manual, (Trader Machinery Inc.
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
SUNNEN, MBB-1650, Manual, Asst’d Tooling & Cabinet,
(Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
I4775 PRESSES, INSERTION
4 Ton HAEGER, , w/Stand, (Trader Machinery Inc.
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
8 Ton PEMSERTER, Series 2000 (2002), PLC control,
(Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
I6200 IRONWORKERS
50 Ton “NEW” FERRIC, HIW 45, Single Operator, 5 Stations,
(Ferric Machinery Inc. Tel: 877-337-7424,
Fax: 905-820-3234) See Page 2
60 Ton “NEW” FERRIC, HIW 60 DC, Dual operator, 5
stations, (Ferric Machinery Inc. Tel: 877-337-7424,
Fax: 905-820-3234) See Page 2
65 Ton “NEW” FERRIC, HIW 60, Single operator, 5 stations,
(Ferric Machinery Inc. Tel: 877-337-7424,
Fax: 905-820-3234) See Page 2
75 Ton KINGSLAND, 75XS, Dual operator, 5 stations (used),
(Ferric Machinery Inc. Tel: 877-337-7424,
Fax: 905-820-3234) See Page 2
80 Ton “NEW” FERRIC, HIW 80 DC, Dual operator, 5
stations, (Ferric Machinery Inc. Tel: 877-337-7424,
Fax: 905-820-3234) See Page 2
100 Ton “NEW” FERRIC, HIW 100 DC, Dual operator, 5
stations, (Ferric Machinery Inc. Tel: 877-337-7424,
Fax: 905-820-3234) See Page 2
125 Ton “NEW” FERRIC, HIW 125 DC, Dual operator, 5
stations, (Ferric Machinery Inc. Tel: 877-337-7424,
Fax: 905-820-3234) See Page 2
55 Ton to 120 Ton “NEW” DURMA, , (Machine Solutions Inc.
Tel: 416-220-5910 See Page 1
100 Ton OMERA, , Mechanical, $3,900, (Machine Solutions
Inc. Tel: 416-220-5910 See Page 1
L0850 LASERS
2000 Watt “NEW” FERRIC, Fibermak, 60 x 120, Beckhoff
control, Lantek Expert, (Ferric Machinery Inc.
Tel: 877-337-7424, Fax: 905-820-3234) See Page 2
2000 Watt AMADA, LC1212A3XL (2004), 4’ x 8’, 17,000
hours, New turbo blower, Ref# 10175, (Jordan Craig
Machinery Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
2000 Watt SALVAGNINI, L3 Fiber (2011), 5’x 10’, Ref#
10255, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
2000 Watt AMADA, Pulsar LC1212A2 (1998), 28,300 Hrs,
New Turbo Blower @ 23,400, Ref# 10406, (Jordan Craig
Machinery Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
2000 Watt AMADA, Pulsar LC2415XLA3 (2000), Current
Machine Hours 34,000, Ref# 10414, (Jordan Craig
Machinery Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
2000 Watt AMADA, Pulsar LC1212A2 (1996), 39,500 hours,
Ref# 10452, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
2600 Watt TRUMPF, Trumatic L2503E, 5’ x 10’ table, good
working order, (Ferric Machinery Inc. Tel: 877-337-7424,
Fax: 905-820-3234) See Page 2
3000 Watt “NEW” FERRIC, Fibermak, 60 x 120, Beckhoff
control, Lantek Expert, (Ferric Machinery Inc.
Tel: 877-337-7424, Fax: 905-820-3234) See Page 2
3000 Watt “NEW” FERRIC, Fibermak, 78 X 160, Beckhoff
control, Lantek Expert, (Ferric Machinery Inc.
Tel: 877-337-7424, Fax: 905-820-3234) See Page 2
3000 Watt TRUMPF, L2530 (1999), 4’x 8’, Siemens, 9483
Beam on hours, Ref# 9753, (Jordan Craig Machinery Int’l
Inc. Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
3000 Watt BYSTRONIC, BySprint Fiber 3015, Installed New:
2013, Ref# 10253, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
3200 Watt TRUMPF, TCL-3030 (2001), 5’x 10’, Ref# 9914,
(Jordan Craig Machinery Int’l Inc. Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
3.2KW TRUMPF, L2030 (2009), 5’x 10’, Auto
Loader/Unloader, Ref# 10432, (Jordan Craig Machinery
Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
3500 Watt TANAKA, TF-3500B (1996), 8’ x 95’, Fanuc 16L,
Ref# 10287, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
British Columbia
Masteel, Delta (Mary) ...................................................................604-952-4434 ........604-952-4432..........6
Modern Tool (BC) Ltd., Port Coquitlam (Pam) .............................604-472-1444 ........604-472-1455..........9
Ontario
Brighton Machinery Sales Inc, Ingersoll (Brian) ...........................519-485-7089 ........519-485-7368........12
CanAmera Machine Tools Inc., Cambridge (Marian) ...................905-878-0888.......................................13
DiPaolo Machine Tools Ltd., Mississauga (Nelson) .....................905-676-9265 ........905-676-9436........19
Elliott Machinery Ltd., Oakville (Frank).........................................905-829-2211 ........905-829-5600..........3
Ferric Machinery Inc., Mississauga (Koen) ..................................877-337-7424 ........905-820-3234..........2
Havlik Int’l Machinery, Cambridge (John).....................................519-624-6240 ........519-624-4119........20
Machine Solutions Inc., Guelph (Andrew)....................................416-220-5910.........................................1
Park Thermal International, Georgetown (Sales).........................905-877-5254 ........905-877-6205........18
Paul Machinery, Burlington (Paul) ................................................905-634-8442 ........905-681-6940........11
Powermaster Machinery Ltd., Mississauga (Peter)......................905-624-9327 ........905-624-8591........18
S K Braly Machinery Inc., Mississauga (Steve)............................905-793-8080 ........905-793-2190........15
Stevens Machinery Sales (2005) Inc, Toronto (Andrew) ..............416-798-3611 ........416-798-8439..........8
Trader Machinery Inc., Concord (Jonathan).................................905-669-7507 ........905-669-7512..........4
Walker Machinery Ltd., Milton (Chris) ..........................................905-876-0890 ........905-876-1959..........9
Quebec
Machinerie Gilles Lupien, Drummondville (Gilles)........................819-478-5266 ........819-478-5266........12
Machinery S. Tremblay, Drummondville (Sylvain)........................819-477-6677 ........819-477-6466........11
USA
Jordan Craig Machinery Int’l Inc., New City (Jordan) ...................845-398-0073 ........845-398-0074..........7
COMPANY PHONE FAX PAGE
ADVERTISERS DIRECTORY
Page 14 Clue April, 2016
L0850 LASERS L6135 LATHES, N/C & CNC
4000 Watt “NEW” FERRIC, Fibermak, 60 x 120, Beckhoff
control, Lantek Expert, (Ferric Machinery Inc.
Tel: 877-337-7424, Fax: 905-820-3234) See Page 2
4000 Watt AMADA, FO MII RI 3015 (2012), 5’x 10’ Rotary
Index, Ref# 10320, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt TRUMPF, Trulaser (2006), 5’x 10’, 22,000 Beam
on hours, Ref# 10325, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt TRUMPF, Trulaser 3040 (2011), 80"x 160", Dual
Pallet, Ref# 10260, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt AMADA, Gemini FO4020 (2003), 80"x 160", Dual
Pallet, Ref# 10262, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt AMADA, FOMII 3015NT (2012), Ref# 10395,
(Jordan Craig Machinery Int’l Inc. Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
4000 Watt AMADA, Gemini FO-3015NT (2005), 5’x 10’,
Aprrox. Hrs: 45,000, Ref# 10402, (Jordan Craig Machinery
Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
4000 Watt MAZAK, Hypergear 510 (2006), Installed
New:2008, Less than 8500hrs, Ref# 9707, (Jordan Craig
Machinery Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
4000 Watt AMADA, Pulsar 2415NTA4 (2010), 8,500hrs, Ref#
10123, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt TRUMPF, TCL3030 (2002), Siemans CNC, 60"x
120", Ref# 10412, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4KW TRUMPF, Trulaser 3030 (2009), 5’x 10’, 22 Shelf
Tower/Liftmaster, Ref# 10431, (Jordan Craig Machinery Int’l
Inc. Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt AMADA, LC3015F1NT (2012), 5’x 10’, Approx. 12,
000hrs, Ref# 10434, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt AMADA, Gemini FO-3015NT (2004), 5’ x 10’,
Installed 2005, Ref# 10453, (Jordan Craig Machinery Int’l
Inc. Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
4000 Watt BYSTRONIC, Bystar 3015 (1999), 5’ x 10’, Shuttle
table, Rotary axis, Loader, Ref# 10455, (Jordan Craig
Machinery Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
4000 Watt BYSTRONIC, Bystar 4020 (1999), 80"x 120",
Shuttle table, Rotary axis, Loader, Ref# 10456, (Jordan
Craig Machinery Int’l Inc. Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
5000 Watt TRUMPF, L3050 (2005), 5’ x 10’, (Trader
Machinery Inc. Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
5 KW TRUMPF, Trulaser 3030 (2010), 5’x 10’, Liftmaster,
Approx. 5000 Beam on hrs, Ref# 10352, (Jordan Craig
Machinery Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
5000 Watt HK, FL-3015 (2011), 5’x 10’, Ref# 10259, (Jordan
Craig Machinery Int’l Inc. Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
5200 Watt BYSTRONIC, Byspeed 3015 (2005), 5’x 10’, Ref#
10072, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
6000 Watt TRUMPF, Trulaser 5030 (2008), Liftmaster, Ref#
10336, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
6KW AMADA, LC-3015F1NT (2011), 5’x 10’, Dual Pallet, Ref#
10114, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
6KW BYSTRONIC, Bystar 4020 (2011), Rotary Axis &
Automation, Ref# 10422, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
MAZAK, FMS-A48-12 (2004), 6 Shelf loader, Ref# 9720,
(Jordan Craig Machinery Int’l Inc. Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
L2150 LATHES, CNC
OKUMA ROBUSTURN, LFS15-2SP (1999), Twin Spindle,
4-axis, Dual chk, Dual Turret turning center, (Machinerie
Gilles Lupien Tel: 819-478-5266, Fax: 819-478-5266)
L3000 LATHES, ENGINE
12"x 36" LOGAN (by Powermatic), 2557 VLH, Variable speed,
3 & 4 jaw chucks, collets., (Brighton Machinery Sales Inc
Tel: 519-485-7089, Fax: 519-485-7368)
13"x 40" HARRISON, , Collet chuck, 2-Axis DRO, (Trader
Machinery Inc. Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
14"x 40" LIBERTY, 1300, 6" 3-Jaw, (Trader Machinery Inc.
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
16"x 40" ACRA, , DRO, (Powermaster Machinery Ltd.
Tel: 905-624-9327, Fax: 905-624-8591) See Page 18
18" x 60" “NEW” POWERTURN, 460, (Trader Machinery Inc.
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
22"x 80" CHIEN YEH, , (Powermaster Machinery Ltd.
Tel: 905-624-9327, Fax: 905-624-8591) See Page 18
26"x 120" CHIEN YEH, , (Powermaster Machinery Ltd.
Tel: 905-624-9327, Fax: 905-624-8591) See Page 18
63"X 106" BOKO, D82H, Semi-Automatic Spinning lathe,
(Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
L6135 LATHES, N/C & CNC
OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw,
2" Bar cap, (Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
MORI SEIKI, SL150S (1997), (Trader Machinery Inc.
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
MORI SEIKI, NL2500/700 (2006), MSX850 Control, 10"Chk,
live holders, C&Y Mill cap, (Trader Machinery Inc.
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
HAAS, SL-20 (2005), Live Tool, (Trader Machinery Inc.
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
CLUE, April 2014 PAGE 19
CERTIFIED EQUIPMENT APPRAISALS * Toronto, OntarioPhone: (905) 793-8080 Fax: (905) 793-2190 Email: [email protected]
W W W . S K B R A L Y . C O M
CLUE, July 2010 Page 3
BRAKES, PRESS
PACIFIC, 35-6, 35 Ton x 6’ CNCCHICAGO, BPO-412-6, 12ga x 48" Box & PanAMADA, RG-100, 110 Ton x 10’ CNC
DRILLS
SAALFELD, BS50 Pillar drill, 2" capacityBERGONZI, TM1600, 5’ Radial drillDOALL, TG-17 Geared Head drill
FACING & CENTERING
SENECA FALLS, EW-75 CNC w/Milling stationSENECA FALLS, EW-75 CNCSENECA FALLS, CS-LO, 5"x 42"
GRINDERS, CYLINDRICAL
TSCHUDIN, HG-400, 8"x 16"TOS, 2UD-1000, 11.5"x 40" Hyd. Universal grinderSTUDER, S-36, 13"x 40" CNC
GRINDERS, SURFACE, RECIPROC
JONES & SHIPMAN, 540P, 6"x 18" HydraulicBROWN & SHARPE, Micromaster, 6"x 18" HydraulicNICCO, NFG-515HD, 6"x 20" Form grinderBROWNE & SHARPE, 12"x 24"
GRINDERS, TOOL & CUTTER
DECKEL, S1 Multi Axis
LATHES, CNC
DAEWOO, 10 HC CNC Turning CentreMAZAK, Super Quadrad 200 4-AxisCHEVALIER, FCL-1840, 18"x 40" Flatbed cnc lathe
LATHES, ENGINE
HARDINGE, HLV-H, 11"x 18" Precision LatheHARDINGE, HLV-H, 11"x 18" with DROMONARCH, EE, 12-1/2"x 20" Precision Engine LatheNAMSEON, 17"x 55"MORI SEIKI, MR-1500, 20"x 60"CHIEN YEH, 20"x 60"CHIEN YEH, CY560, 22"x 80"TOS, SN63/2000, 24"x 80"PBR, TM-300, 24"x 196"
MACHINING CTRS, HORZENSHU, JE30S
OKUMA, MA40-HA, 16"
MACHINING CTRS, VERTMORI-SEIKI, NV-5000
MILLS, UNIVERSALDECKEL, FP 4, 16"x 28"
MILLS, VERTICAL
FIRST, LC, 9"x 42" 1-1/2EXCELLO, 602, 9"x 42"BRIDGEPORT, 9"x 42"FIRST, LC20VH, 10"x 50" Vert/HorizTOPWELL, 5VK, 10"x 50"
PRESSES, HYDRAULIC & AIRDAKE, PSM-20, 20 Ton manual, H-Frame shop press
PUNCHES, TURRET
STRIPPIT, 18-30
SAWS
STARTRITE, H330MV, 12", HorizontalDOALL, C916, 9"x 16", HorizontalDOALL, 36", VerticalSOCO, MC350 NFA Automatic cut-off saw, non-ferrous
SHEARS, POWER SQUARINGDIACRO, 16ga x 24" Hand shear with standEDWARDS, True-Cut, 10ga x 48"AMADA, M-2560, 1/4"x 8’
WELDERSAIRCO, CV-200 Aircomatic mig welder w/ wire feed15KVA FH Spot welder w/ Holden Hunt TransformerPRECISION, 50KVA Spot welder
MISCELLANEOUS
Belt/disc sander, ROCKWELL DELTA, 429/02End Finishing Machine, SOCO, EF-PV/52Flex Arm Tapper, ROSCAMAT, 300Hot Melt Machine, BENCHMARK, 205-HPHot Melt Machine, BENCHMARK, 525Lapping machine, 16" DOALL, LapmasterThread Rolling Machine, SHENG JIAN, Z28-63Tool setter, WAHLI, MXH 300/200Tilting box table, 30"x 24"x 22"
Clue April, 2016 Page 15
12"x 40" HYUNDAI, HIT-30-S (1995), Seimens 840C, Over
Bed 20", Mint cond., (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266)
22"x 78.7" TOOLMEX, TUR560MN-2000 (2012), Siemens
840D, 16" Chk., (Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
24.8"x 118" TOOLMEX, TUR630AMN-3000 (2008), Siemens
840D, 16” Chk., (Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
M0130 MACHINING CTRS, HORZ
OKUMA, MX-60HB (1997), X-39.37" Y-31.5" Z-31.8",
OSP7000, (Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
M0185 MACHINING CTRS, VERT
HAAS, VF1 (2005), X-20" Y-16" Z-20", 15,000 rpm, (Trader
Machinery Inc. Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
OKUMA, No.MX-45 VAE (1998), X-30" Y-18.1" Z-17.7", 40
Taper, OSP 700, (Trader Machinery Inc.
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
OKUMA, MX-45 VAE (1999), X-30" Y-19" Z-18", Table 40"x
20", only 5378 hrs. cutting time, (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266)
MAKINO, S56 (2007), X-35.4" Y-19.7" Z-17.7", Professional 5
CNC, 13,000 rpm, (Trader Machinery Inc.
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
HURCO, (2013), 5-Axis, X-42" Y-24" Z-24", (Trader
Machinery Inc. Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
HAAS, VF-5 (2013), X-50" Y-26" Z-32", 50 Taper, (Trader
Machinery Inc. Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
M0850 MEASURING MACHINES
SHEFFIELD, Cordax D-28 (2009), Discovery III, Ref# 9855,
(Jordan Craig Machinery Int’l Inc. Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
M1550 MILLS, CNC
SUPERMAX, , Knee type Centroid CNC, (Powermaster
Machinery Ltd. Tel: 905-624-9327, Fax: 905-624-8591)
See Page 18
JAFO, , Ram Type, Heidenhain, (Powermaster Machinery Ltd.
Tel: 905-624-9327, Fax: 905-624-8591) See Page 18
M1659 MILLS, UNIVERSAL
10"x 50" TECHLEADER, , 5hp, 2 axis read-out, powerfeed,
$5,500, (Machine Solutions Inc. Tel: 416-220-5910
See Page 1
10"x 50" FIRST, , Horz/Vert, DRO, (Powermaster Machinery
Ltd. Tel: 905-624-9327, Fax: 905-624-8591) See Page 18
M2824 MILLS, VERTICAL
9"x 42/48" BRIDGEPORT, , w/Fagor DRO, (Trader Machinery
Inc. Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
9"x 49" EXCELLO, 602, (Trader Machinery Inc.
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
10"x 50" FIRST, , 40 Taper, DRO, (Powermaster Machinery
Ltd. Tel: 905-624-9327, Fax: 905-624-8591) See Page 18
10"x 50" TOPWELL, No.3VK, 2-Axis Anilam DRO, Power
Drawbar, (Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
10"x 50" HOLKE, , 40 Taper, DRO, (Powermaster Machinery
Ltd. Tel: 905-624-9327, Fax: 905-624-8591) See Page 18
M2833 MILLS, VERTICAL, CNC
9"x 49" BRIDGEPORT, , Acu-Rite MillPower 3-Axis CNC, R8
Taper, (Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
10"x 50" SOUTHWESTERN INDUSTRIES, TRAK K3 (2002),
(Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
12"x 51" TOS, FV25 CNC A (2004), 3-Axis, Fagor 800M CNC
Ctrl, (Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
N5230 NOTCHING MACHINES
1/4" x 8.6"sq “NEW” FERRIC, , variable angle, (Ferric
Machinery Inc. Tel: 877-337-7424, Fax: 905-820-3234)
See Page 2
9"x 9"x 1/8" STRIPPIT, , Hyd., (Trader Machinery Inc.
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
O7397 OVENS
New & Reconditioned , Powered by Electric, Gas, Oil,
Propane, (Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
P2135 PLASMA CUTTING MACHINES
100 Amp MESSER MG, (2000), 6’x 10’, Hy-Definition, CNC
plasma, Metalmaster II, (Trader Machinery Inc.
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
P6100 PRESSES, OBI
40 Ton BROWN BOGGS, , Air Assist Clutch, (Trader
Machinery Inc. Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
60 Ton BLISS, C-60, 4"stk, A/C, (Brighton Machinery Sales
Inc Tel: 519-485-7089, Fax: 519-485-7368)
75 Ton TOLEDO, , Air Clutch & Brake, 5"stroke, (Brighton
Machinery Sales Inc Tel: 519-485-7089,
Fax: 519-485-7368)
80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x
36"bed, (Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
100 Ton CKD HRONOV, , TYP: LEND 100, A/C, Variable
Stroke Length, Command stamp ctls, (Brighton Machinery
Sales Inc Tel: 519-485-7089, Fax: 519-485-7368)
110 Ton NIAGARA, Model: A 5 1/2, 6" Stroke, Mech. Clutch
w/air assist, (Brighton Machinery Sales Inc
Tel: 519-485-7089, Fax: 519-485-7368)
P9050 PUNCHES, LOAD/UNLOAD
AMADA, MP1225NJ (1998), Automatic Load/Unloader, Ref#
10345, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
P9150 PUNCHES, SINGLE STATION
60 Ton FABMASTER, (2011), Like new, (Trader Machinery
Inc. Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
P9275 PUNCHES, TURRET
16.5 Ton WIEDEMANN, Centrum 1000Q, w/Tooling, Fanuc
OP, (Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
19 Ton TRUMPF, Trupunch 1000 (2007), Only 3109hrs, Ref#
9812, (Jordan Craig Machinery Int’l Inc. Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
20 Ton TRUMPF, Trumatic TC3000L (2007), 2KW Truzx
2000, Ref# 9851, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
22 Ton WIEDEMANN, 2044 (2001), 30 Sta, 2 A/I, 114 Style,
Ref# 10304, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
22 Ton AMADA, Apelio III 2510VL, Fanuc 160IL, 2KW Laser,
New 2003, Ref# 10372, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
22 Ton AMADA, Vipros 255 (1997), Fanuc 18P, 31 Sta., 3A/I,
Ball Table, Ref# 9801, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
22 Ton STRIPPIT, V20 1525 (2011), Fanuc 180I, 60"x 80", 34
Station, 4A/I, Ref# 10413, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
22 Ton AMADA, AE2510NT (2010), 50"x 100", 51 Station,
Brush table, Ref# 10436, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
22 Ton AMADA, EM2510NT (2004), AMNC NT CNC, 45
Station, 4 A/I, Ref# 10451, (Jordan Craig Machinery Int’l
Inc. Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
22 Ton TRUMPF, TC2020R Bosch (2001), 50"x 100", Ref#
10439, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
23 Ton STRIPPIT, Global 20 (2003), Fanuc 180I, 4A/I, Thick
Style, Ref# 10423, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
25 Ton TRUMPF, TC6000L 1600 (2010), Laser/Punch,
Sheetmaster, Ref# 10191, (Jordan Craig Machinery Int’l
Inc. Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
25 Ton TRUMPF, TC5000R-1600 (2005), New linear
amplifier, 14,039hrs, Ref# 10159, (Jordan Craig Machinery
Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
L6135 LATHES, N/C & CNC P9275 PUNCHES, TURRET
PAGE 22 CLUE, April, 2016
OvensFor Powder Coating, Aging,
Stress Relief, Normalizing
Gas or Electric
Heat Treat Equipment
Numerous Sizes Available
Call: 905-702-4644
Page 16 Clue April, 2016
CLUE, May 2010 PAGE 21
P9275 PUNCHES, TURRET Z9000 MISCELLANEOUS
27.5 Ton TRUMPF, TC500R Bosch CNC (1993), 18 Station
Rotation, Ref# 10349, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
27.5 Ton TRUMPF, TC600L, Siemans 840D, Ref# 10378,
(Jordan Craig Machinery Int’l Inc. Tel: 845-398-0073,
Fax: 845-398-0074) See Page 7
33 Ton AMADA, Vipros 358 King II, 58 Stn, Fanuc 18P,
(Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
33 Ton AMADA, Vipros 358 KingII (1999), Fanuc 18P, 4 A/I
MP1225NJ Load/Unload, Ref# 10383, (Jordan Craig
Machinery Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
33 Ton YAWEI-NISSHINMBO, HPQ-3048 (2012), Siemens
Control, Thick style tooling, Ref# 10326, (Jordan Craig
Machinery Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
33 Ton AMADA, EMK3610NT AMNC-F (2007), 60"x 100",
Ref# 10361, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Vipros 368 King II (1998), Fanuc 18P CNC
control, Ref# 10363, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Vipros 357 Queen (1998), Fanuc O4PC &
PHNC, 58 Sta, 2 A/I, Ref# 10179, (Jordan Craig Machinery
Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
33 Ton AMADA, Vipros 3610L (2000), L-Shear, 6 Shelf
Loader, Unload Conveyor, Ref# 10269, (Jordan Craig
Machinery Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
33 Ton AMADA, EMK 3610NT (2007), (Trader Machinery Inc.
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
33 Ton AMADA, Vipros 358 King (1998), Fanuc O4PC, 4 A/I,
Ref# 10407, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton STRIPPIT, FC1250MH (1992), Fanuc OPB,
Load/Unload, Thick Style 4A/I, Ref# 10420, (Jordan Craig
Machinery Int’l Inc. Tel: 845-398-0073, Fax: 845-398-0074)
See Page 7
33 Ton AMADA, Vipros 358 King (1998), Fanuc O4PC, 4A/I,
Ref# 10407, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Pega 357 (2000), Fanuc O4PC, 58 Sta, 2A/I,
Ref# 10430, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Pega 345K (1993), Fanuc O4PC, 58 Sta,
2A/I, Ref# 10421, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Pega 367 (1987), Fanuc O4PC, 60"x 72", 58
Sta, 2A/I, Ref# 10433, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
33 Ton AMADA, Pega 357 (1994), Fanuc O4PC, 58 Station, 2
A/I, Ref# 10429, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
50 Ton WIEDEMANN, Vectrum 5000, 72"x 60", 60" Throat, 54
Stn, tooling, (Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
R4704 ROLLS, ANGLE BENDING
2"x 2"x 3/16" “NEW” (Demo) TAURING, SAF DS 50HV,
Hydraulic, (Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
2"x 2"x 1/4" “NEW” FERRIC, APK50, Mod. Rolls, (Ferric
Machinery Inc. Tel: 877-337-7424, Fax: 905-820-3234)
See Page 2
2.2"x 2.2"x 1/4" TAURING, SAF DS 60 HV, (Trader Machinery
Inc. Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
2-3/8" x 2-3/8" x 1/4" “NEW” FERRIC, APK61, Mod. Rolls,
DRO, (Ferric Machinery Inc. Tel: 877-337-7424,
Fax: 905-820-3234) See Page 2
3-1/4"x 3-1/4"x 3/8" “NEW” FERRIC, APK81, Mod. Rolls,
DRO, Hyd. Side guides, (Ferric Machinery Inc.
Tel: 877-337-7424, Fax: 905-820-3234) See Page 2
4"x 4"x 3/8" “NEW” FERRIC, APK101, Mod Rolls, DRO, Hyd.
Side guides, (Ferric Machinery Inc. Tel: 877-337-7424,
Fax: 905-820-3234) See Page 2
6"x 6"x 1/2" PULLMAX, Z43, Hydraulic, Pendant Control,
Digital Readout, (Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
R5603 ROLLS, PLATE BENDING
1"x 10’ PULLMAX, PV7H, Hyd., 3-Roll Double Pinch, (Trader
Machinery Inc. Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
3/16"x 4’ “NEW” FERRIC, , ASM plate roll, DRO, mot.
Bending roll, (Ferric Machinery Inc. Tel: 877-337-7424,
Fax: 905-820-3234) See Page 2
3/16"x 5’ “NEW” FERRIC, , ASM plate roll, DRO, mot.
Bending roll, (Ferric Machinery Inc. Tel: 877-337-7424,
Fax: 905-820-3234) See Page 2
3/16"x 6.5’ “NEW” FERRIC, , ASM plate roll, DRO, mot.
Bending roll, (Ferric Machinery Inc. Tel: 877-337-7424,
Fax: 905-820-3234) See Page 2
5/16"x 8’ “NEW” FERRIC, , AHS 256 plate roll, 4 roll machine,
hardened rolls cone rolling, DRO, (Ferric Machinery Inc.
Tel: 877-337-7424, Fax: 905-820-3234) See Page 2
1-3/4"x 6.5’ AHK 2035, plate roll, 3 roll machine, hardened
rolls, cone rolling, DRO, (Ferric Machinery Inc.
Tel: 877-337-7424, Fax: 905-820-3234) See Page 2
S0653 SAWS, BAND, HORIZONTAL
9"x 16" DOALL, , Semi-Auto, (Trader Machinery Inc.
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
10"x 16" JAESPA, , Semi-Auto, (Trader Machinery Inc.
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
11"x 16" BAXTER, , (Powermaster Machinery Ltd.
Tel: 905-624-9327, Fax: 905-624-8591) See Page 18
S0690 SAWS, BAND, VERTICAL
20" throat CLAUSING STARTRITE, No.20V, (Trader
Machinery Inc. Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
24" STARTRITE, , (Powermaster Machinery Ltd.
Tel: 905-624-9327, Fax: 905-624-8591) See Page 18
S0805 SAWS, COLD & FRICTION
SOCO, MC350A (2001), (Machine Solutions Inc.
Tel: 416-220-5910 See Page 1
S0948 SAWS, MISCELLANEOUS
4"x 10" ELUMATEC, , Fully Automatic Circular Saw,
(Machinerie Gilles Lupien Tel: 819-478-5266,
Fax: 819-478-5266)
S4105 SHEARS, POWER SQUARING
1/4"x 10’ PEARSON, , Hydraulic, (Machine Solutions Inc.
Tel: 416-220-5910 See Page 1
1/4"x 10’ JELSINGRAD, HSL306, Mot. Backgauge (used),
(Ferric Machinery Inc. Tel: 877-337-7424,
Fax: 905-820-3234) See Page 2
1/4"x 10’ “NEW” FERRIC, HGD 3100 x 6, Mot. CNC back
gauge, Auto gap, (Ferric Machinery Inc. Tel: 877-337-7424,
Fax: 905-820-3234) See Page 2
1/4"x 10’ HACO, (2007), CNC with 39" back gauge, $19,500,
(Machine Solutions Inc. Tel: 416-220-5910 See Page 1
1/4"x 10’ CINCINNATI, 1810G (1996), CNC Front/Rear, Ref#
10393, (Jordan Craig Machinery Int’l Inc.
Tel: 845-398-0073, Fax: 845-398-0074) See Page 7
1/4"x 12’ WYSONG, , Mechanical, CNC gauging, (Machine
Solutions Inc. Tel: 416-220-5910 See Page 1
1/2" x 10’ “NEW” FERRIC, HGD 3100 x 13, Mot. CNC back
gauge, Auto gap, (Ferric Machinery Inc. Tel: 877-337-7424,
Fax: 905-820-3234) See Page 2
1/2"x 12’ ALLSTEEL, , Motorized BG adjustable rake and
gap, (Machine Solutions Inc. Tel: 416-220-5910
See Page 1
1/4"-1" x 8’-20’ “NEW” TOSKAR, , Hydraulic, (Machine
Solutions Inc. Tel: 416-220-5910 See Page 1
W3054 WELDERS, SPOT
15 KVA WELDOMATIC, , 24" throat, 575V, (Trader Machinery
Inc. Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
Z9000 MISCELLANEOUS
Transformers 5 KVA to 1000 KVA, Large Assortment of used,
(Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
Pallet Trucks, (Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
Assorted Fans, (Park Thermal International
Tel: 905-877-5254, Fax: 905-877-6205)
Barfeeds LNS, Servo S3, (2007 & 2013) w/Remote pendant,
(Trader Machinery Inc. Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
Threader RIGID, Model 535, some tooling, (Trader Machinery
Inc. Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
Clue April, 2016 Page 17
BARON-MAX MACHINING CENTRE BARON-MAX CNC TEACH-IN LATHE
MAXIMART BEDMILL
DRILLMASTER RADIAL DRILL
“SPECIAL PRICES”HEAVY DUTY LATHES
Special Pricing - Large InventoryAll New Milling Machines - Lathes & Surface Grinders
NEW MACHINES“From Stock”
S1600 - 5’3” ArmTF1280H - 50“ ArmTF1100 - 44” ArmTF900 - 36” ArmTF 750 - 30” ArmMXB5 - 47”x 23”x 24” Travel
7-1/2HP Inverter HeadManual or with Fagor 3-Axis CNC
26” x 120” x 4” Bore - 16” Wide Bed20” x 80” x 4” BoreAlso in Stock: 14“, 16”, 18”, 20“ & 22” Swing
42” x 24” x 24” Fagor Control32” x 20” x 20”
28” x 60” - 4” Bore, also 18” x 40”with Fagor CNC Control
POWERMASTER MACHINERY LTD.1048 Matheson Blvd. E. Mississauga, ON L4W 2V2
Tel: 905-624-9327 Fax: 905-624-8591e-mail: [email protected] website: www.powermaster.ca
OVER 30LATHES
IN STOCK
OVER 40MILLS
IN STOCK
2VS - 9”x49“ - R83VS - 10”x50“ - R84VS - 10”x54” - ISA40
Page 18 Clue April, 2016
Horizontal Lathes “NEW” 20˝x 60˝ manual lathe, 10˝ 3
jaw chuck, 14˝ 4 jaw chuck, 4˝ spindle bore, splash guard, steady rest, stock 4039
“NEW” 20˝x 80˝ manual lathe, 10˝ 3 jaw chuck, 14˝ 4 jaw chuck, 4˝ spindle bore, splash guard, steady rest, stock 4037
MAZAK Slant Turn 40N-ATC Millcenter 1000, Fanuc Control
RD&D 64˝x 170˝, sliding bed type gap lathe, 16˝ hole through spindle, GN10 CNC control, Stock No. 3849
SAFOP 63˝x 236˝, C axis, live tooling on programmable turret, Siemens 840D CNC control, Stock No. 3791
HITACHI 29˝ swing, Turret Lathe, 6.25˝ hole through, Stock No. 3183
MORI SEIKI 27˝x 35˝, Model SL6, Fanuc 6T, 1981, equipped with tailstock, 12 station turret, Stock No. 4173
AWOH+AMUKO 11˝x 13˝ CNC Lathe, Model HJ-28, 18” swing, Fanuc 21iTB Control, 8 position turret, 2004. 2 Available. Stock 4156 & 4157
SMTCL HTC2050, 8˝x 20˝, CNC turning center, FANUC control, tailstock, low hours, like new, 2010.
DMG CTX-410, 2008, 365mm turning diameter, 505mm swing, 66mm bar diameter, 1700 hours.
Vertical Lathes BERTHIEZ 62˝ table, 75˝ swing, Model
TVM 125, 1997, Fanuc 15T, 95kw main spindle, Live tooling, tool and part probes, very heavy duty, Stock No. 4079
SCHIESS 40˝ table, 55˝ swing, Model 14DKE100, updated electrics, fresh paint, Stock No. 4071
BULLARD Man-Au-Trol, 42˝ table, equipped with side head, from an aerospace facility, gently used, Stock No. 4205
OKUMA+HOWA ACT 2SP-V3, 10˝ chucks, twin spindle, Fanuc 0TT, 12 position turrets, 30HP spindles, Stock No. 4219
Cylindrical Grinders SCHAUDT 13˝x 27˝, Universal Heavy
Duty, Stock No. 3826
B&S 10˝x 48˝, Brown & Sharp, Model 1048 Microstatic, Stock No. 3825
Milling Machines HECKERT 16˝x 63˝, Model No. FSS 440
V1/2, Heavy Duty, Universal, Stock No. 3686
Horizontal Boring Mills TOS WD130, 130mm spindle,
Floor type boring mill, FAGOR 8055 CNC, 232˝x 97˝ travel, 90˝x 84˝ G&L table, linear scales, under power, Stock No. 4353
TOS W100A, 1988, FAGOR DRO, tailstock, Stock No. 4805
SCHARMANN 125mm spindle, Model Ecocut, Siemens 880 Ctrl, 3000 RPM, 50 HP spindle, built in CNC Facing head, 2 pallets, 50˝x 63˝
Surface & Blanchard Grinders
ARTER Rotary Surface, Horizontal Spindle, Stock No. 3827
SHIBAURA 48˝, Model No. KRT-8D, Blanchard Style, Stock No. 3684
Machining Centres TOS 12˝x 51˝, Model FV 25, FAGOR
CNC control, box ways, pricedto sell, Stock No. 3710
LEADWELL 20˝x 30˝, Model MCV-760XL, FANUC 0 CNC Control, 20 position ATC, Stock No. 3453
BRIDGEPORT 20˝x 40˝ CNC VMC, Model VMC1000/22, 6000 RPM, 40 taper, 1998, Stock 4159
BOSTOMATIC 32G Graphite VMC, 42K spindle, 4th axis.
Miscellaneous IEMCA Bar feeder, 2.55˝ bar capacity,
3600mm bar length, Stock No. 4066
DANDREA CNC facing head
DO-ALL Horizontal Bandsaw, Model C-916A, Stock No. 3466
AMADA Punch Grinder, Stock No. 3463; Granite Table, 150˝x 150˝, Massive!, Stock No. 3418
ARCHDALE Radial Drill, Stock No. 4211
PRATT & WHITNEY Jig Grinder, Model No 20, Pratt and Whitney rotary table, from an aerospace facility, gently used, Stock No. 4215
AMERICAN Radial drill, 5´ arm, 17˝ column, 5MT spindle taper, power quill travel, Stock No. 4237
PFAUTER Gear hobber, Model P900 Turbo, 36˝ max workpiece diameter, 2.5 max DP, 24˝ axial travel, max hob 7-3/8˝ dia x 9˝ long, Auto hob shift, swing away tailstock, change gears, Stock No. 4253
FLOOR PLATES Various sizes
Toronto Office: 905-676-9265 USA Office: 412-421-1211www.dipaolocnc.com [email protected]
NEW & USED MACHINERY
OTHER SERVICESOn-Site spindle taper grinding
Machine tool calibration and metrology
Mechanical, Electrical and CNC field service
Installations and plant moves
Spare parts including exchange programs
Authorized distributor for Heidenhain,Fagor, Fanuc FA, Siemens and Renishaw.
Certified Appraiser on staff
Way Grinding
Gantries andVertical Boring Mills
Cylindrical, Surface, Rotary, and Vertical
Grinders
CNC Milling Machines and Machining Centers
Universal 5 Axis Milling Machines
Heavy DutyCNC Lathes
Horizontal Boring Mills, Milling Machines,
Machining Centers
Double Column Vertical
Machining Centers
LGB Model R5030, Hydraulic surface grinder, 11.8” x 23.6” magnetic chuck, 1997, Stock 4598.
KASTO Horizontal bandsaw, Model SBA-220 AU, 1985, Stock No. 4567
TRANSFORMERS Various sizes and voltages
LEVELING SHOES Various sizes available
CNC CONTROLS motors, and drives, various
WHQ 13, 2003, 130mm spindle, Heidenhain 430M CNC control, 3500mm - X travel, 2500mm - Y travel, 1250mm - Z travel, 800mm - W travel, 1800mm x 2200mm table size, serial number 2239, Stock No.4851
TOS
BARON-MAX MACHINING CENTRE BARON-MAX CNC TEACH-IN LATHE
MAXIMART BEDMILL
DRILLMASTER RADIAL DRILL
“SPECIAL PRICES”HEAVY DUTY LATHES
Special Pricing - Large InventoryAll New Milling Machines - Lathes & Surface Grinders
NEW MACHINES“From Stock”
S1600 - 5’3” ArmTF1280H - 50“ ArmTF1100 - 44” ArmTF900 - 36” ArmTF 750 - 30” ArmMXB5 - 47”x 23”x 24” Travel
7-1/2HP Inverter HeadManual or with Fagor 3-Axis CNC
26” x 120” x 4” Bore - 16” Wide Bed20” x 80” x 4” BoreAlso in Stock: 14“, 16”, 18”, 20“ & 22” Swing
42” x 24” x 24” Fagor Control32” x 20” x 20”
28” x 60” - 4” Bore, also 18” x 40”with Fagor CNC Control
POWERMASTER MACHINERY LTD.1048 Matheson Blvd. E. Mississauga, ON L4W 2V2
Tel: 905-624-9327 Fax: 905-624-8591e-mail: [email protected] website: www.powermaster.ca
OVER 30LATHES
IN STOCK
OVER 40MILLS
IN STOCK
2VS - 9”x49“ - R83VS - 10”x50“ - R84VS - 10”x54” - ISA40
Clue April, 2016 Page 19
M A C H I N E R Y
899 Danforth PlaceBurlington, ON L7T 1S1Phone: 905-528-7765
Fax: 905-917-0222
Page 20 Clue April, 2016
www.havlikgear.com
Introducing the FUT - TOS new generation
Leaders in gear manufacturing since 1886
Exclusive dealer for TOS Kurim
Havlik Gear (Head Office)455 Sheldon Dr., Cambridge, ON N1T 2B7, CanadaTel: (519) 624-6240 Fax: (519) [email protected]
FUT - TOS new generation
The machine is intended for machining of complex shaped work pieces by adopting the conventional technology and high speed cutting. Independent longitudinal and cross beds with a T-shape layout are the base of the machine. A longitudinal slide with a rotary, adjustable table travels along the longitudinal bed in the direction of the “X” axis. Column moves in the cross direction of the “Z” axis.The headstock moves on the guide surfaces of the column in the vertical direction of the “Y” axis.
MAIN MACHINE FEATURES• cutting-edge composite bed and column solution based
onaweldmentfilledwithaspecialconcretemix• considerable higher rigidity than in conventional struc-
tures• spindle with high torque and speed up to 6 000 rpm• high versatility of automatically interchangeable milling
heads• rapid feed rate 30 m/min• HSCmachiningfromfivesides• up to 6 contouring axis• versatile design and application • thermal stabilization of headstock and heads• long service life, accuracy and reliable operation
The FUT machine axis design goes beyond the industry and reached into the segment of horizontal boring machines where it stands out against other current manufacturers asitofferstopparametersregardingdynamicsandrigid-ity. This ensures higher labour productivity and accuracy of machined parts. The composite solution increasesdampening during machining processes, leading to longer service live of machines and the entire machinery.