Product Lineup TRANSERVO Series CLOSED LOOP STEPPING MOTOR SINGLE-AXIS ROBOTS Excellent characteristics of both stepping motor and servomotor were combined. Stepping motor single-axis robots "TRANSERVO" series breaking through existing conventions. 14 Robot positioner TS-S2/TS-SH P.490 This robot positioner is specialized for the I/O point trace input. The positioning or pushing op- eration can be performed using simple operation, only by specifying a point number from the host control unit and inputting the START signal. TS-SD Robot driver TS-SD P.500 This robot driver omits the operation with robot languages and is dedicated to the pulse train input. This driver can be made applicable to the open collector method or line driver method using the parameter setting and signal wiring. So, you can match the robot driver to the host unit to be used. Applicable models: Applicable models: Note. Except for STH vertical specifications and RF sensor specifications. Note. SG07 is only applicable to TS-SH. SS SR STH Note RF Note BD TS-S2 TS-SH SS SG Note SR RF BD STH
48
Embed
CLOSED LOOP STEPPING MOTOR SINGLE-AXIS ROBOTS · PDF fileCLOSED LOOP STEPPING MOTOR SINGLE-AXIS ROBOTS ... TRANSERVO uses the closed loop control, ... Stepping motor POINT 2 Closed
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
P ro d u c t L i n e u p
TRANSERVOSeries
CLOSED LOOP STEPPING MOTOR SINGLE-AXIS ROBOTSExcellent characteristics of both stepping motor and servomotor were combined.Stepping motor single-axis robots "TRANSERVO" series breaking through existing conventions.
14
Robot positioner TS-S2/TS-SH P.490
This robot positioner is specialized for the I/O point trace input. The positioning or pushing op-eration can be performed using simple operation, only by specifying a point number from the host control unit and inputting the START signal.
TS-SD
Robot driver TS-SD P.500
This robot driver omits the operation with robot languages and is dedicated to the pulse train input. This driver can be made applicable to the open collector method or line driver method using the parameter setting and signal wiring. So, you can match the robot driver to the host unit to be used.Applicable
models:Applicable models:Note. Except for STH vertical specifications and RF sensor specifications.Note. SG07 is only applicable to TS-SH.
SS SR STHNote RFNote BD
TS-S2 TS-SH
SS SGNote SR
RF BD
STH
15
Newly developed vector control method provides functions and performance similar to servomotors.
Type Model Size (mm) Note 1 Lead(mm)
Maximum payload (kg)Note 2Maximum speed (mm/sec.) Note 3
Stroke (mm)
PageHorizontal Vertical
SS type(Slider type)
Straight model/Space-saving model
SS04-SSS04-R (L)
W49 × H5912 2 1 600
50 to 400SS04-S: P.130
6 4 2 300SS04-R (L): P.1312 6 4 100
SS05-SSS05-R (L)
W55 × H5620 4 - 1000
50 to 800SS05-S: P.132
12 6 1 600SS05-R (L): P.1336 10 2 300
SS05H-SSS05H-R (L)
W55 × H56
20 6 - 1000
50 to 800
SS05H-S: P.134
12 8 2 600 (Horizontal)500 (Vertical)
SS05H-R (L): P.1356 12 4 300 (Horizontal)
250 (Vertical)
SG type(Slider type)
SG07 W65 × H6420 36 4 1200
50 to 800 SG07: P.13612 43 12 8006 46 20 350
SR type(Rod type standard)
Straight model/Space-saving model
SR03-SSR03-R (L)SR03-U
W48 × H56.512 10 4 500
50 to 200SR03-S: P.137SR03-R (L): P.138
6 20 8 250 SR03-U: P.139
SR04-SSR04-R (L)
W48 × H5812 25 5 500
50 to 300SR04-S: P.142
6 40 12 250SR04-R (L): P.1432 45 25 80
SR05-SSR05-R (L)
W56.4 × H7112 50 10
50 to 300SR05-S: P.146
6 55 20 150SR05-R (L): P.1472 60 30 50
SR type(Rod type
with support guide)Straight model/
Space-saving model
SRD03-SSRD03-U W105 × H56.5
12 10 3.5 50050 to 200
SRD03-S: P.1406 20 7.5 250 SRD03-U: P.141
SRD04-SSRD04-U
W135 × H5812 25 4 500
50 to 300SRD04-S: P.144
6 40 11 250SRD04-U: P.1452 45 24 80
SRD05-SSRD05-U
W157 × H7112 50 8.5 300
50 to 300SRD05-S: P.148
6 55 18.5 150SRD05-U: P.1492 60 28.5 50
■ Allowable ambient temperature for robot installation
SS/SR type 0 to 40 °C
Note 1. The size shows approximate maximum cross sectional size.Note 2. The payload may vary depending on the operation speed. For details, refer to the detailed page of relevant model.Note 3. The maximum speed may vary depending on the transfer weight or stroke length. For details, refer to the detailed page
of relevant model.
SS05H-S SS05H-R (L)
Straight model P.130 Space-saving model (Side mounted motor model) P.131
SR type (Rod type with support guide)
SRD05-S SRD04-S SRD03-S SRD05-U SRD04-U SRD03-U
Straight model P.140 Space-saving model (Side mounted motor model) P.141
Note 1. The size shows approximate maximum cross sectional size.Note 2. The payload may vary depending on the operation speed. For details, refer to the detailed page of relevant model.Note 3. The maximum speed may vary depending on the transfer weight or stroke length. For details, refer to the detailed page
of relevant model.Note 4. STH04-R (L) with 50-stroke and brake is not supported.
■ Allowable ambient temperature for robot installation
STH/RF/BD type 5 to 40 °C
STH type (Slide table type)
17
P O I N T 1
New control method combining the advantages of both the servomotor and stepping motor
The stepping motor provides features that its price is less expensive and hunting (minute vibration) does not occur during stopping. However, this motor has disadvantages that the positional deviation due to step-out occurs (in the open loop mode), the torque decreases greatly in the high speed area, and the power consumption is large during stopping. As YAMAHA’s TRANSERVO uses the closed loop control, this ensures complete "no step-out". Furthermore, use of a newly developed vector control method ensures less torque decrease in the high speed area, energy saving, and low noise. The function and performance equivalent to the servomotor are achieved at a low cost even using the stepping motor.
TR ANSERVO combines both mer i ts.
Servomotor
• Tiny vibration during stopping• High cost
• High-pitched operation noise• Great torque decrease in high speed area• Large power consumption during stopping
• Simple & low cost• No vibration during stopping
• Smooth movement• Constant torque at any time• Energy saving
Stepping motor
P O I N T 2
Closed loop control using excellent environment resistant resolver
A resolver with excellent reliability is used to detect the motor position in the same manner as YAMAHA’s upper model. The stable position detection can be made even in a poor environment where fine particle dusts or oil mists exist. Additionally, a high resolution of 20480 pulses per revolution is provided.
P O I N T 3
High resolution (4096, 20480 pulse/rev)
Use of a high resolution makes it possible to maintain excellent controllability. Variations in speed are small and settling time during deceleration stop can be shortened.
This resolver is a magnetic position detector. The resolver features a simple structure without using electronic components and optical elements, and less potential failure factors when compared to general optical encoders.The resolver has high environment resistance and low failure ratio, and is used in a wide variety of fields aiming at reliability such as automobile or aircraft industry.
Energy saving
As the basic control is the same as the servomotor, waste power con-
sumption is suppressed. This greatly contributes to the energy saving
and CO2 reduction.
No hunting during stopping
Stop mode without hunting can be set in the same manner as the
general stepping motor. So, select this mode as required.
Time
Spe
ed
Adverse effect on settling time
Settling ability: Good
Speed stability: Good
× Settling ability: Poor
× Speed stability: PoorTRANSERVOConventional model
Common features of TRANSRVO Series
P O I N T 4
Return-to-origin is not needed to shorten the start-up time.
New type robot positioner TS-SH applicable to the high power was newly developed.This robot positioner is applicable to the absolute position system and does not need any return-to-origin.The work can be started quickly to shorten the start-up time.
TS-SH
T R A N S E R V O S e r i e s P r o d u c t L i n e u p
18
SR type (Rod type) Standard model/Model with support guide
Maintenance interval is greatly extended.
Normal grease lubrication on the ball screw loses a very small
amount of oil as the ball screw moves.
The SR type has a lubricator that supplies grease lost over long
periods to greatly extend the maintenance interval and ensure near
maintenance-free operationNote .Note. The maintenance-free period is within the running life of the robot.
P O I N T
Tact is shortened by high-speed movement.As advantages of the vector control method are utilized at maximum level, the TRANSERVO maintains a constant payload even in a high-speed range. This greatly contributes to shortening of the tact time. Additionally, by combining this feature with high-lead ball screws, the TRANSRERVO has achieved a maximum speed of 1 m/sec.Note which is faster than any single-axis servo motor.Note. SS05-S/SS05H-S with 20 mm-lead specifications
Pay
load
200 400 600 8000
Payload decreases in high-speed range.
Payload decreases in high-speed range.
Speed (mm/s)
Pay
load
Speed (mm/s)200 400 600 8000
Payload is always constant.
Payload is always constant.
Conventional model TRANSERVO (SS type)
P O I N T
Long-term maintenance free is achieved.
A lubricator used in the ball screw and a contact scraper installed at the rod inlet and outlet provide maintenance-free operation.
SS type (Slider type) Straight model/Space-saving model
P O I N T
4-row circular arc groove type 2-point contact guide applicable to even large moment loadA newly developed module guide is employed with a 4-row circular arc groove type 2-point contact guide built into a very compact body similar to the conventional model. This guide maintains a satisfactory rolling movement with less ball differential slip due to its structure even if a large moment load is applied or the installation surface precision is poor, and has characteristics that are difficult to malfunction, such as unusual wear.
SG type (Slider type)
P O I N T
Maximum speed is 1200 mm/sec.The maximum speed is made 1.2 times faster than that of the current
model SS05H.
The tact-up of the equipment can be achieved.
Maximum speed
of the current model is
increased 1.2 times.
Maximum speed 1200 mm/sec
Maximum speed 1000 mm/seccurrent model
SS05H
SG07
Maximum payload
46kg
SG07
Maximum payload
SS05H
12kgPayload is increased
about 4 times.
P O I N T
Maximum payload is 46 kg. A maximum payload of 20 kg is supported even with the vertical specifications.As rigid table slide and 56 motor are adopted, the payload is
increased greatly. A maximum payload of 46 kg is achieved.
Up to 20 kg can be transferred even with the vertical specifications.
If a large moment load is applied or the installation surface precision is poor, a large differential slip may occur easily.
■ 2-row gothic arch groove type 4-point contact guide
Conventional model
Differential slip is small due to its structure and service life is long.
■ 4-row circular arc groove type 2-point contact guide
TRANSERVO (SS type)
Highly reliable resolver is used.
Ball screw lubricator
Laminated type contact scraper
A resolver with excellent environment resistance is used for the position detector. All models can select brake specifications.
A lubricator with high density fiber net impregnated with grease supplies an adequate amount of oil to appropriate locations.
A dual-layer scraper removes fine foreign objects sticking to the rod to prevent them from entering the inside and troubles caused by foreign objects. Rod rattle is suppressed effectively.
19
STH type (Slide table type) Straight model/Space-saving model
P O I N T
Use of a circulation type linear guide achieves the high rigidity and high accuracy.l Guide rail is integrated with the table.
l Table deflection amount is small.
l Use of a circulation type linear guide achieves the high rigidity and high accuracy.
l STH06 provides an allowable overhang exceeding that of FLIP-X series T9.
l Space-saving model with the motor built-into the body is also added to the product lineup.
l Suitable for precision assembly.
RF type (Rotary type) Standard model/High rigidity model
P O I N T
Rotation axis model, first in TRANSERVO series
l Rotation axis model, first in TRANSERVO series
l Thin and compact
l Can be secured from the top or bottom surface.
l Hollow hole, through which the tool wiring is passed, is prepared.
l Workpiece can be attached easily.
l Motor is built-into the body to achieve the space-saving.
l Standard model or high rigidity model can be selected.
BD type (Belt type) Straight model
P O I N T
Belt type applicable to long stroke
l Applicable to up to 2000 mm-stroke.
l High speed movement at a speed of up to 1500 mm/sec. can be made.
l Maximum payload 14 kg
l Main body can be installed without disassembling the robot.
l Shutter is provided as standard equipment. This prevents grease scattering or entry of foreign object.
■ Tip nozzle for grease application
When applying the grease to the ball screw of the SR type space-saving model SR03-UB or SRD03-UB, use a grease gun with the tip bent.
Note. YAMAHA's recommended product. This tip nozzle can be attached to a generally available grease gun.
Model KCU-M3861-00
Workpiece installation tap Guide rail is integrated with the table.
Positioning pin holeWorkpiece installation reproducibility is improved.
Body installation through holeInstallation is possible from the top surface.
Standard model High rigidity model
Use of highly rigid bearing makes it possible to reduce displacement amount in the radial thrust direction of the table.
Shutter is provided as standard equipment.This shutter covers the guide, ball screw, and belt.The shutter prevents grease scattering or entry of external foreign object.
Environment-friendly lubrication system
The lubrication system is environment-friendly as it uses a high
density fiber net and supplies an adequate amount of oil to appro-
priate locations to eliminate waste lubrication.
Prevention of foreign object entry
The dual-layer scraper is in contact with the front of the rod to
ensure excellent fine contaminant particle removal performance.
The scraper removes fine contaminant particles sticking to the rod
through multi steps to prevent them from entering the inside and
troubles caused by foreign objects. Additionally, oleo-synthetic foam
rubber with a self-lubricating function ensures low-friction resis-
Note 1. The size shows approximate maximum cross sectional size.Note 2. The payload may vary depending on the operation speed. For details, refer to the
detailed page of relevant model.Note 3. The maximum speed may vary depending on the transfer weight or stroke length.
For details, refer to the detailed page of relevant model.Note 4. STH04-R (L) with 50-stroke and brake is not supported.
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts YP-X
CLEA
NCO
NTRO
LLERINFO
RMATIO
N
Lin
ea
r convey o
r m
od
ule
s
LCM
100
129
Rod type: Running life distance to life time conversion example Rod type: Grease gun nozzle tube for space-saving models
This is an example of life time converted from the running life distance listed on each model page for the SR type.
Robot ordering method descriptionIn the order format for the YAMAHA single-axis robots TRANSERVO series, the notation (letters/numbers) for the mechanical section is shown linked to the controller section notation.
[Example]
1K3K5K10K
1m3m5m10m
02061220
2mm6mm12mm20mm
S
R
L
Straight modelSpace-saving model (motor installed on right)Space-saving model (motor installed on left)
NB
With no brakeWith brake
SS04SS05SS05HSG07
NZ
StandardNo-motor side
NC
Standard greaseClean room grease
Model Model Brake Origin position Grease optionLead Stroke Cable length
1K3K5K10K
1m3m5m10m
020612
2mm6mm12mm
S
R
L
U
Straight modelSpace-saving model (motor installed on right)Space-saving model (motor installed on left)Space-saving model (motor installed on top)
NB
With no brakeWith brake
SR03SRD03SR04SRD04SR05SRD05
NZ
StandardNo-motor side
NHV
No plate With plateWith flange
Model Model Brake Origin position Bracket plateLead Stroke Cable length
● SS type / SG type (Slider type)
● SR type (Rod type)
1K3K5K10K
1m3m5m10m
05081016
5mm8mm10mm16mm
S
R
L
Straight modelSpace-saving model (motor installed on right)Space-saving model (motor installed on left)
NB
With no brakeWith brake
STH04STH06
NZ
StandardNo-motor side
NH
No plate With plate
Model Model Brake Origin position Bracket plateLead Stroke Cable length
1K3K5K10K
1m3m5m10m
48 48mm N With no brakeBD04BD05BD07
N Standard
Model Brake Origin positionLead Stroke Cable length
● STH Type (Slide table type)
1K3K5K10K
1m3m5m10m
NS
Stroke end (Limit rotation)Sensor (Limitless rotation)
● RF Type (Rotary type / Limit rotation specification, Rotary type / Sensor specification)
● BD Type (Belt type)
Mechanical SS05
• Lead 6mm• Model Straight• Brake Yes• Origin position Standard
• Grease Standard• Stroke 600mm• Cable length 1m
Controller TS-S2
• Input /Output selection NPN
Ordering Method
NN 1K S2NP06SB 600SS05Mechanical section Controller section
To find detailed controller information see the controller page.
TS-S2 P.490 , TS-SH P.490 , TS-SD P.500
When greasing the ball screw in the SR03-UB or SRD03-UB (motor installed on top / with brake), use a grease gun with a bent nozzle tube as shown below.■ Grease gun nozzle tube (YAMAHA recommended nozzle tube)
This nozzle tube is even usable when there is little space around the grease port.For example, when the SR04 or SR05 space-saving model is used with the motor facing up, the grease port is positioned on the side of the robot body. This may make it difficult to refill grease depending on the positions of other robots or peripheral units.
SR03-UB and SRD03-UB
Model KCU-M3861-00
Note. This nozzle tube can be attached to a commercially available ordinary grease gun.
(29)
(ф5)
(120)
(PT1/8)
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts Y
P-XC
LEAN
CON
TROLLER
INFORM
ATION
Lin
ea
r convey o
r m
od
ule
s
LCM
100
130 Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
SS04 CE compliance Origin on the non-motor side is selectable
Slider type
SS04Model Lead Model Brake Origin position Grease option Stroke Cable length Note 2
12: 12mm S: Straight model N: With no brake N: Standard Note 1 N: Standard grease 50 to 400(50mm pitch)
1K: 1m06: 6mm R: Space-saving model
(motor installed on right)B: With brake Z: Non-motor side C: Clean room grease 3K: 3m
02: 2mm 5K: 5mL: Space-saving model (motor installed on left)
10K: 10m
Controller Operation method
TS-S2TS-SH
I/O point trace /Remote command
TS-SD Pulse train control
Motor 42 Step motorResolution (Pulse/rotation) 20480Repeatability Note 1 (mm) +/-0.02Deceleration mechanism Ball screw ϕ8 (Class C10) Maximum motor torque (N.m) 0.27Ball screw lead (mm) 12 6 2Maximum speed (mm/sec) 600 300 100
Maximum payload (kg)
Horizontal 2 4 6Vertical 1 2 4
Max. pressing force (N) 45 90 150Stroke (mm) 50 to 400 (50mm pitch)
Overall length (mm)
Horizontal Stroke+216Vertical Stroke+261
Maximum outside dimension of body cross-section (mm) W49 × H59
Cable length (m) Standard: 1 / Option: 3, 5, 10
Note 1. Positioning repeatability in one direction.
SS04 Straight model
12.5
40.5
30.5
2415
13
20.5
8
161+/-2: When origin is on motor side(161: When origin is on non-motor side)
Effective stroke (55: When origin is on motor side)
21129+/-1 (Note 1)
206+/-2 (with brake): When origin is on motor side(206 with brake: When origin is on non-motor side)
Note. Distance from center of slider upper surface to carrier center-of-gravity at a guide service life of 10,000 km (Service life is calculated for 400mm stroke models).
Motor installation (Space-saving model)
Motor installed on rightR type
Motor installed on leftL type
Effective stroke 50 100 150 200 250 300 350 400 Note 1. Stop positions are determined by the mechanical stoppers at both ends.Note 2. Secure the cable with a tie-band 100mm or less from unit’s end face to prevent the cable from being subjected to
excessive loads.Note 3. The cable’s minimum bend radius is R30.Note 4. These are the weights without a brake. The weights are 0.2kg heavier when equipped with a brake.
Note 1. If changing from the origin position at the time of purchase, the machine reference amount must be reset. For details, refer to the manual.
Note 2. The robot cable is flexible and resists bending. Note 3. See P.498 for DIN rail mounting bracket.Note 4. Select this selection when using the gateway function. For details, see P.60.
SS04-S SS04-R
Basic specifications
Allowable overhang Note Static loading moment
Controller
S2Robot positioner I/OS2: TS-S2 Note 3 NP: NPN
PN: PNPCC: CC-LinkDN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 4
SHRobot positioner I/O BatterySH: TS-SH NP: NPN B: With battery
(Absolute)PN: PNPCC: CC-Link N: None
(Incremental)DN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 4
SD 1Robot driver I/O cable
SD: TS-SD 1: 1m
Ordering method
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts YP-X
CLEA
NCO
NTRO
LLERINFO
RMATIO
N
Lin
ea
r convey o
r m
od
ule
s
LCM
100
131Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
SS04 Space-saving model
L
5832
49
21
88.5
56.5 33
(Tol
eran
ce b
etw
een
knoc
ks +
/-0.0
2)
Effective stroke(82: When origin is on non-motor side)
50
58.5 A×50
38 C
2
R
50
15
110101
2541
(108
)
(88.5)
Motor
128.5 (with brake)
(82 +/-2: When origin is on motor side)
50 +/-1(Note 1)
4-M4×0.7 Depth 82-ϕ3H7 Depth 6
23 +/-1 (Note 1)
(55: When origin is on motor side)
55 +/-2: When origin is on non-motor sideSS04-L Specifications
(Note 2)Cable securing position
Approx. 245 (Cable length)(15)
(40)
(31)
(24)
4
D
epth
6+0
.02
0
ϕ4H7 Depth 6+0.012 0
B-M5×0.8 Depth 12
51 (S
lider
top
face
)
Effective stroke 50 100 150 200 250 300 350 400 Note 1. Stop positions are determined by the mechanical stoppers at both ends.Note 2. Secure the cable with a tie-band 80mm or less from unit’s end face to prevent the cable from being subjected to
excessive loads.Note 3. The cable’s minimum bend radius is R30.Note 4. These are the weights without a brake. The weights are 0.2kg heavier when equipped with a brake.Note 5. The belt cover’s left and right sides are asymmetrical. Therefore, if the motor mounting orientation is changed, the
Max. pressing force (N) 27 45 90Stroke (mm) 50 to 800 (50mm pitch) Overall length (mm)
Horizontal Stroke+230Vertical Stroke+270
Maximum outside dimension of body cross-section (mm) W55 × H56
Cable length (m) Standard: 1 / Option: 3, 5, 10
Note 1. Positioning repeatability in one direction.Note 2. When the stroke is longer than 600mm, resonance of
the ball screw may occur depending on the operation conditions (critical speed). In this case, reduce the speed setting on the program by referring to the maximum speeds shown in the table below.
SS05Model Lead Model Brake Note 1 Origin position Grease option Stroke Cable length Note 3
20: 20mm S: Straight model N: With no brake N: Standard Note 2 N: Standard grease 50 to 800(50mm pitch)
1K: 1m12: 12mm R: Space-saving model
(motor installed on right)B: With brake Z: Non-motor side C: Clean room grease 3K: 3m
06: 6mm 5K: 5mL: Space-saving model (motor installed on left)
10K: 10m
SS05 Straight model
24
30.5
40.5
12.5
13
1520
.58
Approx. 200 (Cable length) 178+/-2: When origin is on motor side(178: When origin is on non-motor side)
140+/-1 (Note 1)Cable securing position (Note 2)
218+/-2 (with brake): When origin is on motor side(218 with brake: When origin is on non-motor side)
180+/-1 (with brake) (Note 1)
34
Effective stroke
2-ϕ4H7 Depth 64-M4 x 0.7 Depth8
42(b
etwe
en kn
ocks
+/-0
.02 )
(52: When origin is on motor side)52+/-2: When origin is on non-motor side
Note. Distance from center of slider upper surface to carrier center-of-gravity at a guide service life of 10,000 km (Service life is calculated for 600mm stroke models).
Motor installation (Space-saving model)
Motor installed on rightR type
Motor installed on leftL type
Note 1. Stop positions are determined by the mechanical stoppers at both ends.
Note 2. Secure the cable with a tie-band 100mm or less from unit’s end face to prevent the cable from being subjected to excessive loads.
Note 3. The cable’s minimum bend radius is R30.Note 4. These are the weights without a brake. The weights
are 0.2kg heavier when equipped with a brake.Note 5. When the stroke is longer than 600mm, resonance of
the ball screw may occur depending on the operation conditions (critical speed). In this case, reduce the speed setting on the program by referring to the maximum speeds shown in the table at the left.
Note 1. Brake-equipped models can be selected only when the lead is 12mm or 6mm.Note 2. If changing from the origin position at the time of purchase, the machine reference amount must be reset. For details,
refer to the manual.Note 3. The robot cable is flexible and resists bending.Note 4. See P.498 for DIN rail mounting bracket.Note 5. Select this selection when using the gateway function. For details, see P.60.
SS05-S
SS05-R
Basic specifications
Allowable overhang Note Static loading moment
Controller
S2Robot positioner I/OS2: TS-S2 Note 4 NP: NPN
PN: PNPCC: CC-LinkDN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 5
SHRobot positioner I/O BatterySH: TS-SH NP: NPN B: With battery
(Absolute)PN: PNPCC: CC-Link N: None
(Incremental)DN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 5
SD 1Robot driver I/O cable
SD: TS-SD 1: 1m
Ordering method
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts YP-X
CLEA
NCO
NTRO
LLERINFO
RMATIO
N
Lin
ea
r convey o
r m
od
ule
s
LCM
100
133Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
SS05 Space-saving model
L
4270
56.5
88.555
42 (T
oler
ance
bet
wee
n k
nock
s +/
-0.0
2)
34
Effective stroke 52 +/-2: When origin is on non-motor side
42 C
68 A×5050
2
R
24104113
55
57 (S
lider
top
face
) 3450
(113
)
(88.5)
Motor
128.5 (with brake)
56.5 +/-1 (Note 1)
14 +/-1 (Note 1)
(52: When origin is on motor side)
B-M6×1.0 Depth 12
4 +0
.02
Dep
th 6
0
SS05-L Specifications
(40)
(24)
(31)
(15)
(94.5: When origin is on non-motor side)94.5 +/-2: When origin is on motor side
4-M4×0.7 Depth 82-ϕ4H7 Depth 6
(Note 2)Cable securing position
Approx. 245 (Cable length)
ϕ4H7 Depth 6+0.012 0
Note 1. Stop positions are determined by the mechanical stoppers at both ends.
Note 2. Secure the cable with a tie-band 80mm or less from unit’s end face to prevent the cable from being subjected to excessive loads.
Note 3. The cable’s minimum bend radius is R30.Note 4. These are the weights without a brake. The weights
are 0.2kg heavier when equipped with a brake.Note 5. When the stroke is longer than 600mm, resonance of
the ball screw may occur depending on the operation conditions (critical speed). In this case, reduce the speed setting on the program by referring to the maximum speeds shown in the table at the left.
Note 6. The belt cover’s left and right sides are asymmetrical. Therefore, if the motor mounting orientation is changed, the cover cannot be attached.
134 Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
SS05H Slider type
SS05HModel Lead Model Brake Note 1 Origin position Grease option Stroke Cable length Note 3
20: 20mm S: Straight model N: With no brake N: Standard Note 2 N: Standard grease 50 to 800(50mm pitch)
1K: 1m12: 12mm R: Space-saving model
(motor installed on right)B: With brake Z: Non-motor side C: Clean room grease 3K: 3m
06: 6mm 5K: 5mL: Space-saving model (motor installed on left)
10K: 10m
Controller Operation method
TS-S2TS-SH
I/O point trace /Remote command
TS-SD Pulse train control
Motor 42 Step motorResolution (Pulse/rotation) 20480Repeatability Note 1 (mm) +/-0.02Deceleration mechanism Ball screw ϕ12 (Class C10) Maximum motor torque (N.m) 0.47Ball screw lead (mm) 20 12 6Maximum speed Note 2
(mm/sec) Horizontal 1000 600 300
Vertical – 500 250Maximumpayload (kg)
Horizontal 6 8 12Vertical – 2 4
Max. pressing force (N) 36 60 120Stroke (mm) 50 to 800 (50pitch) Overall length (mm)
Horizontal Stroke+286Vertical Stroke+306
Maximum outside dimension of body cross-section (mm) W55 × H56
Cable length (m) Standard: 1 / Option: 3, 5, 10
Note 1. Positioning repeatability in one direction.Note 2. When the stroke is longer than 600mm, resonance of the ball
screw may occur depending on the operation conditions (critical speed). In this case, reduce the speed setting on the program by referring to the maximum speeds shown in the table below.
SS05H Straight model
12.5
40.5
30.5
24
13
1520
.58
Approx. 200 (Cable length) 223.5+/-2: When origin is on motor side(223.5: When origin is on non-motor side)
Effective stroke (62.5: When origin is on motor side)62.5+/-2: When origin is on non-motor side
Note. Distance from center of slider upper surface to carrier center-of-gravity at a guide service life of 10,000 km (Service life is calculated for 600mm stroke models).
High lead: Lead 20 CE compliance Origin on the non-motor side is selectable
Motor installation (Space-saving model)Motor installed on rightR type
Note 1. Stop positions are determined by the mechanical stoppers at both ends.
Note 2. Secure the cable with a tie-band 100mm or less from unit’s end face to prevent the cable from being subjected to excessive loads.
Note 3. The cable’s minimum bend radius is R30.Note 4. These are the weights without a brake. The weights
are 0.2kg heavier when equipped with a brake.Note 5. When the stroke is longer than 600mm,
resonance of the ball screw may occur depending on the operation conditions (critical speed). In this case, reduce the speed setting on the program by referring to the maximum speeds shown in the table at the left.
Note 1. Brake-equipped models can be selected only when the lead is 12mm or 6mm.Note 2. If changing from the origin position at the time of purchase, the machine reference amount must be reset. For details,
refer to the manual.Note 3. The robot cable is flexible and resists bending.Note 4. See P.498 for DIN rail mounting bracket.Note 5. Select this selection when using the gateway function. For details, see P.60.
SS05H-S
SS05H-R
Basic specifications
Allowable overhang Note Static loading moment
Controller
S2Robot positioner I/OS2: TS-S2 Note 4 NP: NPN
PN: PNPCC: CC-LinkDN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 5
SHRobot positioner I/O BatterySH: TS-SH NP: NPN B: With battery
(Absolute)PN: PNPCC: CC-Link N: None
(Incremental)DN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 5
SD 1Robot driver I/O cable
SD: TS-SD 1: 1m
Ordering method
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts YP-X
CLEA
NCO
NTRO
LLERINFO
RMATIO
N
Lin
ea
r convey o
r m
od
ule
s
LCM
100
135Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
SS05H Space-saving model
L
5390
56.5
88.555
43
43(T
oler
ance
bet
wee
n k
nock
s +/
-0.0
2)
Effective stroke(100: When origin is on non-motor side) 62.5 +/-2: When origin is on non-motor side
42 C
R
2
6850
A×50
104113
55
24 60 (S
lider
top
face
)
5234
(113
)
(88.5)
Motor
128.5 (with brake)
52 +/-1 (Note 1)
100 +/-2: When origin is on motor side
4-M5×0.8 Depth 10 2-ϕ4 H7 Depth 6
14.5 +/-1 (Note 1)(62.5: When origin is on motor side)
Note 1. Stop positions are determined by the mechanical stoppers at both ends.
Note 2. Secure the cable with a tie-band 80mm or less from unit’s end face to prevent the cable from being subjected to excessive loads.
Note 3. The cable’s minimum bend radius is R30.Note 4. These are the weights without a brake. The weights
are 0.2kg heavier when equipped with a brake.Note 5. When the stroke is longer than 600mm,
resonance of the ball screw may occur depending on the operation conditions (critical speed). In this case, reduce the speed setting on the program by referring to the maximum speeds shown in the table at the left.
Note 6. The belt cover’s left and right sides are asymmetrical. Therefore, if the motor mounting orientation is changed, the cover cannot be attached.
SS05H
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts Y
P-XC
LEAN
CON
TROLLER
INFORM
ATION
Lin
ea
r convey o
r m
od
ule
s
LCM
100
Controller TS-SH u 490136
SG07 Slider type
SG07Model Lead Model Brake Origin position Grease option Stroke Cable length Note 2
20: 20mm S: Straight model N: With no brake N: Standard Note 1 N: Standard grease 50 to 800(50mm pitch)
1K: 1m12: 12mm B: With brake Z: Non-motor side C: Clean room grease 3K: 3m06: 6mm 5K: 5m
Max. pressing force (N) 60 100 225Stroke (mm) 50 to 800 (50pitch) Overall length (mm)
Horizontal Stroke+288Vertical Stroke+328
Maximum outside dimension of body cross-section (mm) W65×H64
Cable length (m) Standard: 1 / Option: 3, 5, 10
Note 1. Positioning repeatability in one direction.Note 2. When the stroke is longer than 600mm, resonance of the ball
screw may occur depending on the operation conditions (critical speed). In this case, reduce the speed setting on the program by referring to the maximum speeds shown in the table below.
Note 3. It is necessary to change the maximum speed according to the payload. For details, see the “Speed vs. payload” graph shown below.
Note. Position detectors (resolvers) are common to incremental and absolute specifications. If the controller has a backup function then it will be absolute specifications.
SG07 Straight model
65
72
LL+40 (with brake)
(116)60
64 (S
lider
top
face
)
50.4
3248
(58.2)
Effective stroke (87: When origin is on motor side)
26+/-1 (Note 1)Cable securing position (Note 2)
140+/-1 (Note 1)
180+/-1 (with brake) (Note 1)
45
40 (bet
wee
n kn
ocks
+/-0
.02)
30+/-0.02
201+/-3: When origin is on motor sideApprox. 200 (Cable length)
241+/-3 (with brake):When origin is on motor side
2-ϕ3 H7 Depth 6
4-M5×0.8 Depth 10
87+/-3: When origin is on non-motor side(201:When origin is on non-motor side)(Approx. 160: with brake)
Note. Distance from center of slider upper surface to carrier center-of-gravity at a guide service life of 10,000 km (Service life is calculated for 600mm stroke models).
Note. Calculated by the speed corresponding to the payload.
High lead: Lead 20 CE compliance Origin on the non-motor side is selectable.
SHRobot positioner I/O Battery
SH: TS-SH NP: NPN B: With battery (Absolute)PN: PNP
CC: CC-Link N: None (Incremental)DN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O board Note 3
Speed vs. payload
Note 1. Stop positions are determined by the mechanical stoppers at both ends.
Note 2. Secure the cable with a tie-band 100mm or less from unit’s end face to prevent the cable from being subjected to excessive loads.
Note 3. The cable’s minimum bend radius is R30.Note 4. These are the weights without a brake. The
weights are 0.7kg heavier when equipped with a brake.
Note 5. When the stroke is longer than 600mm, resonance of the ball screw may occur depending on the operation conditions (critical speed). In this case, reduce the speed setting on the program by referring to the maximum speeds shown in the table at the below.
Note 1. If changing from the origin position at the time of purchase, the machine reference amount must be reset. For details, refer to the manual.Note 2. The robot cable is flexible and resists bending.Note 3. Select this selection when using the gateway function. For details, see P.60.
Max. pressing force (N) 75 100Stroke (mm) 50 to 200 (50pitch) Lost motion 0.1mm or lessRotating backlash (°) +/-1.0Overall length (mm)
Horizontal Stroke+236.5Vertical Stroke+276.5
Maximum outside dimension of body cross-section (mm) W48 × H56.5
Cable length (m) Standard: 1 / Option: 3, 5, 10
Note 1. The maximum speed needs to be changed in accordance with the payload. See the “Speed vs. payload” graph shown on the right. For details, see P. 128.
SR03 Straight model
* Contents of option: Plate, 2 pcs. See our robot manuals for additional settings.
A
6
68.5 Ball screw greasing port (φ6.5)9.5See Note 5.
7.5 (Width across flat part)
(5)
37.5±2 Effective stroke
(7)
φ16
M8×1.25
11 (Width across flat)35
11 (
Wid
th a
cros
s fla
t)
(0.5
)21
38.5
P.C
.D.2
9
56.5
10M4x0.7 Depth 5 (For securing cable)
15
LL+40 (with brake)
L1
Approx. 250 (Cable length)
4-M3×0.5 Depth 10(90°-equal division)
48
18
(21) 45°
8
(10) 27.5
Origin on motor side
Origin on non-motor side
View ADimensions of attached nut
27
25
4150
H×50K-M3×0.5 Depth 4
5 13 M8×1.25
(15)
10
M4×0.7 Depth 5(For securing cable)
10
64
(21)
52
(41)* See the bottom installation tap position.
2-φ5.5
(25)
15Hex. socket head cap bolt (M3×0.5), Length under head 10* Two bolts are required for one plate.
4555
2434
(21)
4-φ4.5 drill-through
Hex. socket head cap bolt (M3×0.5), Length under head 14
5000 km on models other than shown below.Running life of only the model shown below becomes shorter than 5000 km depending on the payload, so check the running life curve.
Lead 12Vertical
0
1000
2000
3000
4000
5000
6000
0 1 2 3 4
Run
ning
life
(km
)
Payload (kg)
0
5
10
15
20
25
0 100 200 300 400 500 600
Pay
load
(kg
)
Speed (mm/s)
0123456789
0 100 200 300 400 500 600
Pay
load
(kg
)
Speed (mm/s)
Vertical
Horizontal
Lead 6
Lead 12
Lead 6
Lead 12
Effective stroke 50 100 150 200
L1 161 211 261 311
L 249 299 349 399
H 2 3 4 5
K 6 8 10 12
Weight (kg) Note 7 1.1 1.3 1.4 1.6
Note 1. It is possible to apply only the axial load. Use the external guide together so that any radial load is not applied to the rod.
Note 2. The orientation of the width across flat part is undefined to the base surface.
Note 3. Use the support guide together to maintain the straightness.Note 4. When running the cables, secure cables so that any load is not
applied to them.Note 5. Remove the M4 hex. socket head cap set bolts and use them
to secure the cables. (Effective screw thread depth 5)Note 6. The cable’s minimum bend radius is R30.Note 7. Models with a brake will be 0.2kg heavier.Note 8. Distance to mechanical stopper.
Controller Operation method
TS-S2TS-SH
I/O point trace /Remote command
Controller Operation method
TS-SD Pulse train control
Motor installation (Space-saving model)Motor installed on rightR type
Motor installed on leftL type
Motor installed on topU type
Note 1. See P.129 for grease gun nozzles.Note 2. If changing from the origin position at the time of
purchase, the machine reference amount must be reset. For details, refer to the manual.
Note 3. The robot cable is flexible and resists bending.Note 4. See P.498 for DIN rail mounting bracket.Note 5. Select this selection when using the gateway
function. For details, see P.60.
S2Robot positioner I/OS2: TS-S2 Note 4 NP: NPN
PN: PNPCC: CC-LinkDN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 5
SHRobot positioner I/O BatterySH: TS-SH NP: NPN B: With battery
(Absolute)PN: PNPCC: CC-Link N: None
(Incremental)DN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 5
SD 1Robot driver I/O cable
SD: TS-SD 1: 1m
Note. See P.129 for running life distance to life time conversion example.
Ordering method
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts Y
P-XC
LEAN
CON
TROLLER
INFORM
ATION
Lin
ea
r convey o
r m
od
ule
s
LCM
100
138 Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
SR03 Space-saving model (motor installed on left)
1887.5(Width across flat part)
27.5(10)
ф16
M8×1.25
M8×1.25
(31)
(24)(40)
(15)
42
94
P.C.D
.2945°
35
11(Width across flat)
2138
.5(0
.5)
11(W
idth
acro
ss fla
t)
48
56.5
48
53 20
97
68.59.5
88
6
128 (with brake)L 37.5+/-2
Effective strokeApprox. 245 (Cable length)
See Note 5.
A
Origin on motor side
Origin on non-motor side
10(2
1)25 52
(41)
15
64
Hex. socket head cap bolt (M3×0.5), Length under head 10
* See the bottom installation tap position.(37.5)10
(21)
5545
3424
Hex. socket head cap bolt (M3×0.5), Length under head 14
13
(15)
Dimensions of attached nut
5
4150H×50
25
6
10 L1
K-M3×0.5 Depth 4
M4×0.7 Depth 5(For securing cable)
27
10
View A
M4×0.7 Depth 5(For securing cable)
(5(Note 8))(7(Note 8))
4-M3×0.5 Depth 10(90°-equal division)
* Contents of option: Plate, 2 pcs. See our robot manuals for additional settings.
Option: Vertical installation plate (flange)
Option: Horizontal installation plate (foot)
4-ф4.5drill-through
2-ф5.5drill-through
Ball screw greasing port (ф6.5)
* Two bolts are required for one plate.
Effective stroke 50 100 150 200
L1 161 211 261 311
L 204 254 304 354
H 2 3 4 5
K 6 8 10 12
Weight (kg) Note 7 1.3 1.5 1.6 1.8
Note 1. It is possible to apply only the axial load. Use the external guide together so that any radial load is not applied to the rod.
Note 2. The orientation of the width across flat part is undefined to the base surface.
Note 3. Use the support guide together to maintain the straightness.Note 4. When running the cables, secure cables so that any load is
not applied to them.Note 5. Remove the M4 hex. socket head cap set bolts and use
them to secure the cables. (Effective screw thread depth 5)Note 6. The cable’s minimum bend radius is R30.Note 7. Models with a brake will be 0.2kg heavier.Note 8. Distance to mechanical stopper.
SR03 Space-saving model (motor installed on right)
1887.5(Width across flat part)
27.5(10)
ф16
1015
6
M8×1.25
M8×1.25
(24)(40)
(31)
42
(15)
94
P.C.D.29
45°
3511(Width across flat)
2138
.5
11(W
idth
acr
oss
flat)
48
56.5
48
97
5320
68.5
Effective stroke
9.5
88
6
LApprox. 245 (Cable length)
128 (with brake)
See Note 5.
Origin on motor side
Origin on non-motor side
10(2
1)25 52
(41)
15
64
Hex. socket head cap bolt (M3×0.5), Length under head 10* Two bolts are required for one plate.
* See the bottom installation tap position. (37.5)10
(21)
5545
34 24
Hex. socket head cap bolt (M3×0.5), Length under head 14
13
(15)
(0.5
)
5
25
4150
H×5010 L1
37.5+/-2(5(Note 8))(7(Note 8))
4-M3×0.5 Depth 10(90°-equal division)
K-M3×0.5 Depth 4
M4×0.7 Depth 5(For securing cable)
M4×0.7 Depth 5(For securing cable)
4-ф4.5drill-through
2-ф5.5drill-through
* Contents of option: Plate, 2 pcs. See our robot manuals for additional settings.
Option: Vertical installation plate (flange)
Option: Horizontal installation plate (foot)
Ball screw greasing port (ф6.5)
Dimensions of attached nut
Effective stroke 50 100 150 200
L1 161 211 261 311
L 204 254 304 354
H 2 3 4 5
K 6 8 10 12
Weight (kg) Note 7 1.3 1.5 1.6 1.8
Note 1. It is possible to apply only the axial load. Use the external guide together so that any radial load is not applied to the rod.
Note 2. The orientation of the width across flat part is undefined to the base surface.
Note 3. Use the support guide together to maintain the straightness.Note 4. When running the cables, secure cables so that any load is
not applied to them.Note 5. Remove the M4 hex. socket head cap set bolts and use
them to secure the cables. (Effective screw thread depth 5)Note 6. The cable’s minimum bend radius is R30.Note 7. Models with a brake will be 0.2kg heavier.Note 8. Distance to mechanical stopper.
SR03
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts YP-X
CLEA
NCO
NTRO
LLERINFO
RMATIO
N
Lin
ea
r convey o
r m
od
ule
s
LCM
100
139Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
SR03
SR03 Space-saving model (motor installed on top) A
188
7.5(Width across flat part)
27.5(10)
ф16
10
15
88
128 (with brake)
M8×1.25
M8×1.25
1
(24)
(31)
(40)
(15)
94
42
45°
P.C.D.29
3511(Width across flat)
38.5
11(W
idth
acr
oss
flat)
48(0
.5)
56.548
21
5321
98
25
6
1041
50H×50
L1
Effective strokeLApprox. 245 (Cable length)Origin on motor side
Origin on non-motor side
10(2
1)25 52
(41)
15
64
Hex. socket head cap bolt (M3×0.5), Length under head 10
* See the bottom installation tap position.(37.5)10
Hex. socket head cap bolt (M3×0.5), Length under head 14
2-ф5.5drill-through
* Contents of option: Plate, 2 pcs. See our robot manuals for additional settings.
Option: Vertical installation plate (flange)
Option: Horizontal installation plate (foot)
Dimensions of attached nut
* Two bolts are required for one plate.
Effective stroke 50 100 150 200
L1 161 211 261 311
L 204 254 304 354
H 2 3 4 5
K 6 8 10 12
Weight (kg) Note 7 1.3 1.5 1.6 1.8
Note 1. It is possible to apply only the axial load. Use the external guide together so that any radial load is not applied to the rod.
Note 2. The orientation of the width across flat part is undefined to the base surface.Note 3. Use the support guide together to maintain the straightness.Note 4. When running the cables, secure cables so that any load is not applied to them.Note 5. Remove the M4 hex. socket head cap set bolts and use them to secure the cables.
(Effective screw thread depth 5)Note 6. The cable’s minimum bend radius is R30.Note 7. Models with a brake will be 0.2kg heavier.Note 8. Distance to mechanical stopper.
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts Y
P-XC
LEAN
CON
TROLLER
INFORM
ATION
Lin
ea
r convey o
r m
od
ule
s
LCM
100
140 Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
Running life
Basic specifications Speed vs. payload
SRD03 Rod type (With support guide)
SRD03-S SRD03-U
Controller
CE compliance Origin on the non-motor side is selectable: Lead 6, 12
SRD03Model Lead Model Brake Origin position Bracket plate Stroke Cable length Note 3
12: 12mm S: Straight model N: With no brake N: Standard Note 2 N: No plate 50 to 200(50mm pitch)
1K: 1m06: 6mm U: Space-saving model Note 1
(motor installed on top)B: With brake Z: Non-motor side H: With plate 3K: 3m
5K: 5m10K: 10m
Motor 42 Step motor
Resolution (Pulse/rotation) 20480
Repeatability (mm) +/-0.02
Deceleration mechanism Ball screw ϕ8 (Class C10)
Ball screw lead (mm) 12 6
Maximum speed Note 1 (mm/sec) 500 250
Maximumpayload (kg)
Horizontal 10 20
Vertical 3.5 7.5
Max. pressing force (N) 75 100
Stroke (mm) 50 to 200 (50pitch)
Lost motion 0.1mm or less
Rotating backlash (°) +/-0.05
Overall length (mm)
Horizontal Stroke+236.5
Vertical Stroke+276.5
Maximum outside dimension of body cross-section (mm) W48 × H56.5
Cable length (m) Standard: 1 / Option: 3, 5, 10
Note 1. The maximum speed needs to be changed in accordance with the payload. See the “Speed vs. payload” graph shown on the right. For details, see P. 128.
5000 km on models other than shown below.Running life of only the model shown below becomes shorter than 5000 km depending on the payload, so check the running life curve.
0
1000
2000
3000
4000
5000
6000
0 1 2 3 4
Lead 12Vertical
Run
ning
life
(km
)
Payload (kg)
Controller Operation method
TS-S2TS-SH
I/O point trace /Remote command
Controller Operation method
TS-SD Pulse train control
0
5
10
15
20
25
0 100 200 300 400 500 600
0
1
2
3
4
5
6
7
8
0 100 200 300 400 500 600
Pay
load
(kg
)
Speed (mm/s)
Pay
load
(kg
)
Speed (mm/s)
Vertical
Horizontal
Lead 6
Lead 12
Lead 6
Lead 12
SRD03 Straight model
* Contents of option: Plate, 2 pcs. See our robot manuals for additional settings.
A
68.5
Ball screw greasing port (φ6.5)
φ8φ15
6 3535
9.5
See Note 3.
56.5
48
(21) 38
.5
105
3022 27 35
3583
L1
37.5±2 Effective stroke
(7) (5)
10
10M4×0.7 Depth 5(For securing cable) L
L+40 (with brake)
15
Approx. 250 (Cable length)
1823 23 23
97
21(0
.5)
8-M4×0.7 Depth 10(For user tool installation)4-M4×0.7 drill-through(For main unit installation)
Origin on motor side
Origin on non-motor side
25
K-M3×0.5 Depth 4
4150
H×50View A
27
M4×0.7 Depth 5(For securing cable)
10
2-φ5.5
10
64
52
(41)
* See the bottom installation tap position.
(25)
21
15 Hex. socket head cap bolt (M3×0.5), Length under head 10* Two bolts are required for one plate.
Option: Horizontal installation plate (foot)
Effective stroke+7835.5
Effective stroke 50 100 150 200
L1 161 211 261 311
L 249 299 349 399
H 2 3 4 5
K 6 8 10 12
Weight (kg) Note 5 1.5 1.7 1.9 2.1
Note 1.It is possible to apply only the axial load. Use the external guide together so that any radial load is not applied to the rod.
Note 2.When running the cables, secure cables so that any load is not applied to them.Note 3.Remove the M4 hex. socket head cap set bolts and use them to secure the cables.
(Effective screw thread depth 5)Note 4.The cable’s minimum bend radius is R30.Note 5.Models with a brake will be 0.2kg heavier.Note 6.Distance to mechanical stopper.
Note 1. See P.129 for grease gun nozzles.Note 2. If changing from the origin position at the time of
purchase, the machine reference amount must be reset. For details, refer to the manual.
Note 3. The robot cable is flexible and resists bending.Note 4. See P.498 for DIN rail mounting bracket.Note 5. Select this selection when using the gateway
function. For details, see P.60.
Note. See P.129 for running life distance to life time conversion example.
S2Robot positioner I/OS2: TS-S2 Note 4 NP: NPN
PN: PNPCC: CC-LinkDN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 5
SHRobot positioner I/O BatterySH: TS-SH NP: NPN B: With battery
(Absolute)PN: PNPCC: CC-Link N: None
(Incremental)DN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 5
SD 1Robot driver I/O cable
SD: TS-SD 1: 1m
Ordering method
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts YP-X
CLEA
NCO
NTRO
LLERINFO
RMATIO
N
Lin
ea
r convey o
r m
od
ule
s
LCM
100
141Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
SRD03
SRD03 Space-saving model (motor installed on top) A
111.5
10
15
88
128 (with brake)
(24)
(31)
(40)
(15)
941
42
21 38.5
48
56.548
21
22 3027 35
83
10597
23 23 2335
5325
6
41
50
H×50L110
Effective strokeLApprox. 245 (Cable length)
3535
ф 15ф8
35.5 1810Effective stroke+78
37.5+/-2
Origin on motor side Origin on non-motor side
10(2
1)25 52
(41)
15
64
Hex. socket head cap bolt (M3×0.5), Length under head 10
* See the bottom installation tap position.
10
27
M4×0.7 Depth 5(For securing cable) Ball screw greasing port
(ф6.5)
(5(Note 8))
(7(Note 8))
M4×0.7 Depth 5(For securing cable)
M4×0.7 Depth 5(For securing cable) K-M3×0.5
Depth 4
4-M4×0.7 drill-through(For main unit installation)
8-M4x0.7 Depth 10(For user tool installation)
2-ф5.5drill-through
* Contents of option: Plate, 2 pcs. See our robot manuals for additional settings.
Option: Horizontal installation plate (foot)
* Two bolts are required for one plate.
(0.5
)
View A
Effective stroke 50 100 150 200
L1 161 211 261 311
L 204 254 304 354
H 2 3 4 5
K 6 8 10 12
Weight (kg) Note 7 1.7 1.9 2.1 2.3
Note 1. It is possible to apply only the axial load. Use the external guide together so that any radial load is not applied to the rod.
Note 2. The orientation of the width across flat part is undefined to the base surface.Note 3. Use the support guide together to maintain the straightness.Note 4. When running the cables, secure cables so that any load is not applied to them.Note 5. Remove the M4 hex. socket head cap set bolts and use them to secure the
cables. (Effective screw thread depth 5)Note 6. The cable’s minimum bend radius is R30.Note 7. Models with a brake will be 0.2kg heavier.Note 8. Distance to mechanical stopper.
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts Y
P-XC
LEAN
CON
TROLLER
INFORM
ATION
Lin
ea
r convey o
r m
od
ule
s
LCM
100
142 Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
Running life
Basic specifications Speed vs. payload
SR04 Rod type
SR04-S SR04-R
Controller
CE compliance Origin on the non-motor side is selectable: Lead 6, 12
SR04Model Lead Model Brake Origin position Note 2 Bracket plate Stroke Cable length Note 4
12: 12mm S: Straight model N: With no brake N: Standard Note 3 N: No plate 50 to 300(50mm pitch)
1K: 1m06: 6mm R: Space-saving model Note 1
(motor installed on right)B: With brake Z: Non-motor side H: With plate 3K: 3m
02: 2mm V: With flange 5K: 5mL: Space-saving model Note 1 (motor installed on left)
10K: 10m
Motor 42 Step motorResolution (Pulse/rotation) 20480Repeatability (mm) +/-0.02
Max. pressing force (N) 150 300 600Stroke (mm) 50 to 300 (50pitch) Lost motion 0.1mm or lessRotating backlash (°) +/-1.0Overall length (mm)
Horizontal Stroke+263Vertical Stroke+303
Maximum outside dimension of body cross-section (mm) W48 × H58
Cable length (m) Standard: 1 / Option: 3, 5, 10
Note 1. The maximum speed needs to be changed in accordance with the payload. See the “Speed vs. payload” graph shown on the right. For details, see P. 128. Additionally, when the stroke is long, the maximum speed is decreased due to the critical speed of the ball screw. See the maximum speed table shown at the lower portion of the drawing.
SR04 Straight model A
* Contents of option: Plate, 2 pcs., Nut, 12 pcs. See our robot manuals for additional settings.
View A
Dimensions of attached nut
M10×1.256 17
(19.
6)
67.5 Ball screw greasing port (φ6.5)
28.5
M4×0.7 Depth 5(For securing cable)See Note 5. 9.5
14 (Width across flat)
2545
14
(Wid
th a
cros
s fla
t)
2545
22
(7)
42.5±2
(5)
Effective stroke
φ20
8.5 (Width across flat part)
M10×1.25 45°
T-slot for M3 (8 locations)
4-M4×0.7 Depth 10(90°-equal division)
32.5(10)
P.C.D.53
Origin on motor side
Origin on non-motor side
Dimensions of attached square nut for T-slot (6 pcs.) Details of T-slot
5.8
3.3
3.5
1.5
2.45.5 (7
.8)
M3×0.5
L1(T-slot range)
16.5M4×0.7 Depth 5
(For securing cable)
L9.5
L+40 (with brake)
Approx. 250 (Cable length)
48
58
(22.
5)
9.5
9
6
Installed within the T-slot range of the main unit.Hex. socket head cap bolt (M3×0.5), Length under head 10*Six bolts are required for one plate.
Hex. socket head cap bolt (M4×0.7), Length under head 14
5000 km on models other than shown below.Running life of only the model shown below becomes shorter than 5000 km depending on the payload, so check the running life curve.
0
1000
2000
3000
4000
5000
6000
0 5 10 15 20 250
1000
2000
3000
4000
5000
6000
0 1 2 3 4 5
Lead 2Vertical
Run
ning
life
(km
)
Payload (kg)
Lead 12Vertical
Run
ning
life
(km
)
Payload (kg)
Note. See P.129 for running life distance to life time conversion example.
Note 1. It is possible to apply only the axial load. Use the external guide together so that any radial load is not applied to the rod.
Note 2. The orientation of the width across flat part is undefined to the base surface.Note 3. Use the support guide together to maintain the straightness.Note 4. For lead 2mm specifications, the origin on the non-motor side cannot be set.Note 5.When running the cables, secure cables so that any load is not applied to them.Note 6. Remove the M4 hex. socket head cap set bolts and use them to secure the cables. (Effective screw thread depth 5)Note 7. The cable’s minimum bend radius is R30.Note 8. Models with a brake will be 0.2kg heavier.Note 9.Distance to mechanical stopper.
Controller Operation method
TS-S2TS-SH
I/O point trace /Remote command
Controller Operation method
TS-SD Pulse train control
Effective stroke 50 100 150 200 250 300
L1 162.5 212.5 262.5 312.5 362.5 412.5
L 270.5 320.5 370.5 420.5 470.5 520.5
Weight (kg) Note 8 1.4 1.7 1.9 2.2 2.4 2.7
Maximum speed for each
stroke (mm/sec)
Lead 12 500 440 320
Lead 6 250 220 160
Lead 2 80 72 53
Note 1. See P.129 for grease gun nozzles.Note 2. When “2mm lead” is selected, the origin position
cannot be changed (to non-motor side).Note 3. If changing from the origin position at the time of
purchase, the machine reference amount must be reset. For details, refer to the manual.
Note 4. The robot cable is flexible and resists bending.Note 5. See P.498 for DIN rail mounting bracket.Note 6. Select this selection when using the gateway
function. For details, see P.60.
0
10
20
30
40
50
0 100 200 300 400 500 600
0
5
10
15
20
25
30
0 100 200 300 400 500 600
Pay
load
(kg
)
Speed (mm/s)
Pay
load
(kg
)
Speed (mm/s)
Vertical
Horizontal
Lead 6
Lead 2
Lead 2
Lead 12
Lead 6
Lead 12
Motor installation (Space-saving model)Motor installed on rightR type
Motor installed on leftL type
S2Robot positioner I/OS2: TS-S2 Note 5 NP: NPN
PN: PNPCC: CC-LinkDN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 6
SHRobot positioner I/O BatterySH: TS-SH NP: NPN B: With battery
(Absolute)PN: PNPCC: CC-Link N: None
(Incremental)DN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 6
SD 1Robot driver I/O cable
SD: TS-SD 1: 1m
Ordering method
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts YP-X
CLEA
NCO
NTRO
LLERINFO
RMATIO
N
Lin
ea
r convey o
r m
od
ule
s
LCM
100
143Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
SR04 Space-saving model (motor installed on left) A
(10) 32.5
9 22
8.5(Width across flat part)
ф20
M10×1.25
67.5
Effective stroke
112
L 42.5+/-2
9.5Approx. 245 (Cable length)
6
152 (with brake)
L1(T-slot range)Origin on motor side
Origin on non-motor side (Note 9)
See Note 5.
P.C.D
.5345°
45
14 (Widt
h ac
ross
flat)
25
45
14(Width across flat)
48102.5
4856.5
1.5
25
56
T-slot for M3 (8 locations)
(31)
(24)(40)
(15)
1000.5 0.5
4410
(22.
5)
2010
71(25) 57
10(42.5) 60
73
34 45
9.5
6
28.5
9.5
51.
5
3.35.8
Detail of section B
5.5M3x0.5
M10x1.25
Dimensions of attachedsquare nut for T-slot (6 pcs.)
2.4
17
(19.
6)
(7.8
)
6
B
M4×0.7 Depth 5(For securing cable)
Ball screw greasing port (ф6.5)
(7(Note 8))
4-M4x0.7 Depth 10(90°-equal division)
M4×0.7 Depth 5(For securing cable)
2-ф6.6drill-through 4-ф6.6 drill-through
* Contents of option: Plate, 2 pcs., Nut, 12 pcs. See our robot manuals for additional settings.
Option: Vertical installation plate (flange)
Option: Horizontal installation plate (foot)
(22.
5)
Hex. socket head cap bolt (M4×0.7), Length under head 14
* Six bolts are required for one plate.
(5(Note 8))
Dimensions of attached nut
Installed within the T-slot range of the main unit.(Hex. socket head cap bolt (M3×0.5), Length under head 10)
Note 1. It is possible to apply only the axial load. Use the external guide together so that any radial load is not applied to the rod.
Note 2. The orientation of the width across flat part is undefined to the base surface.Note 3. Use the support guide together to maintain the straightness.Note 4. When running the cables, secure cables so that any load is not applied to them.Note 5. Remove the M4 hex. socket head cap set bolts and use them to secure the
cables. (Effective screw thread depth 5)Note 6. The cable’s minimum bend radius is R30.Note 7. Models with a brake will be 0.2kg heavier.Note 8. Distance to mechanical stopper.Note 9. For lead 2mm specifications, the origin on the non-motor side cannot be set.Note 10.This unit can be installed with the motor facing up (turned 90 degrees from the
position in this drawing).
SR04 Space-saving model (motor installed on right)
Dimensions of attached nut
9.516
.5
(10) 32.5
9 228.5(Width across flat part)
ф20
M10×1.25
67.5
112152 (with brake)
L 42.5+/-2 Effective stroke
6
Approx. 245 (Cable length)
L1(T-slot range)9.5
Origin on motor side
Origin on non-motor side (Note 9)
See Note 5. 45°
2545
14(W
idth
acro
ss fla
t)
25
45
14(Width across flat)
48102.5
48 56.5
1.5
56T-slot for M3 (8 locations)(3
1)
(24)(40)
(15)
100 0.5
440.
5
10(2
2.5)
2010
71(25) 57
Installed within the T-slot range of the main unit.(Hex. socket head cap bolt (M3×0.5), Length under head 10)
10
(42.5)
(22.
5) 3445
6073
9.5
6
17
(19.
6)
(7.8
)
65.8
51.
5
Detail of section B
5.5M3x0.5
M10x1.25
Dimensions of attachedsquare nut for T-slot (6 pcs.)
2.4
B
Ball screw greasing port (ф6.5)
(5(Note 8))
(7(Note 8))
4-M4x0.7 Depth 10(90°-equal division)
M4×0.7 Depth 5(For securing cable)
M4×0.7 Depth 5(For securing cable)
2-ф6.6drill-through
4-ф6.6drill-through
* Contents of option: Plate, 2 pcs., Nut, 12 pcs. See our robot manuals for additional settings.
Option: Vertical installation plate (flange)
Option: Horizontal installation plate (foot)
* Six bolts are required for one plate.
Hex. socket head cap bolt (M4×0.7), Length under head 14
3.3
P.C.D
.53
Effective stroke 50 100 150 200 250 300
L1 162.5 212.5 262.5 312.5 362.5 412.5
L 209.5 259.5 309.5 359.5 409.5 459.5
Weight (kg) Note 7 1.6 1.9 2.1 2.4 2.6 2.9
Maximum speed for each
stroke (mm/sec)
Lead 12 500 440 320
Lead 6 250 220 160
Lead 2 80 72 53
Note 1. It is possible to apply only the axial load. Use the external guide together so that any radial load is not applied to the rod.
Note 2. The orientation of the width across flat part is undefined to the base surface.Note 3. Use the support guide together to maintain the straightness.Note 4. When running the cables, secure cables so that any load is not applied to them.Note 5. Remove the M4 hex. socket head cap set bolts and use them to secure the
cables. (Effective screw thread depth 5)Note 6. The cable’s minimum bend radius is R30.Note 7. Models with a brake will be 0.2kg heavier.Note 8. Distance to mechanical stopper.Note 9. For lead 2mm specifications, the origin on the non-motor side cannot be set.Note 10.This unit can be installed with the motor facing up (turned 90 degrees from
the position in this drawing).
SR04
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts Y
P-XC
LEAN
CON
TROLLER
INFORM
ATION
Lin
ea
r convey o
r m
od
ule
s
LCM
100
144 Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
Running life
Basic specifications Speed vs. payload
SRD04 Rod type (With support guide)
SRD04-S SRD04-U
Controller
SRD04 Straight model
* Contents of option: Plate, 2 pcs., Nut, 12 pcs. See our robot manuals for additional settings.
A
4545
φ10
φ19
Ball screw greasing port(φ6.5)
67.59.5
6
45
See Note 3.
L1(T-slot range)
Effective stroke42.5±2
2030
126
(7)
105
(5)T-slot for M3 (4 locations)
25
135
3445
LL+40 (with brake)
16.5
30 30 30
8-M5×0.8 Depth 12(For user tool installation)
4-M5×0.8 drill-through(For main unit installation)
M4×0.7 Depth 5(For securing cable)
Approx. 250 (Cable length)
10.5 22
58
48
(22.
5)
Origin on motor side
Origin on non-motor side
View A
28.5
M4×0.7 Depth 5(For securing cable)
Details of T-slot Dimensions of attached square nut for T-slot (6 pcs.)
1.5
3.5
3.3
2.45.8
5.5 (7
.8)
M3×0.5
9.5
9.5
Installed within the T-slot range of the main unit.Hex. socket head cap bolt (M3×0.5), Length under head 10* Six bolts are required for one plate.
57
2-φ6.6
71
(25)
10(2
2.5)
2010
Option: Horizontal installation plate (foot)
Effective stroke+100.545
5000 km on models other than shown below.Running life of only the model shown below becomes shorter than 5000 km depending on the payload, so check the running life curve.
0100020003000400050006000
0 5 10 15 20 25R
unni
ng li
fe (k
m)
Payload (kg)0
100020003000400050006000
0 1 2 3 4 5
Run
ning
life
(km
)
Payload (kg)
Lead 2Vertical Lead 12Vertical
0
10
20
30
40
50
0 100 200 300 400 500 600
0
5
10
15
20
25
30
0 100 200 300 400 500 600
Pay
load
(kg
)
Speed (mm/s)
Pay
load
(kg
)
Speed (mm/s)
Vertical
Horizontal
Lead 6
Lead 2
Lead 2
Lead 12
Lead 6
Lead 12
Effective stroke 50 100 150 200 250 300
L1 162.5 212.5 262.5 312.5 362.5 412.5
L 270.5 320.5 370.5 420.5 470.5 520.5
Weight (kg) Note 6 2.0 2.4 2.7 3.0 3.3 3.7
Maximum speed for each
stroke (mm/sec)
Lead 12 500 440 320
Lead 6 250 220 160
Lead 2 80 72 53
Note 1.It is possible to apply only the axial load. Use the external guide together so that any radial load is not applied to the rod.
Note 2.For lead 2mm specifications, the origin on the non-motor side cannot be set.
Note 3.When running the cables, secure cables so that any load is not applied to them.
Note 4.Remove the M4 hex. socket head cap set bolts and use them to secure the cables. (Effective screw thread depth 5)
Note 5.The cable’s minimum bend radius is R30.Note 6.Models with a brake will be 0.2kg heavier.Note 7.Distance to mechanical stopper.
CE compliance
SRD04Model Lead Model Brake Origin position Note 2 Bracket plate Stroke Cable length Note 4
12: 12mm S: Straight model N: With no brake N: Standard Note 3 N: No plate 50 to 300(50mm pitch)
1K: 1m06: 6mm U: Space-saving model Note 1
(motor installed on top)B: With brake Z: Non-motor side H: With plate 3K: 3m
02: 2mm 5K: 5m10K: 10m
Motor 42 Step motorResolution (Pulse/rotation) 20480Repeatability (mm) +/-0.02
Max. pressing force (N) 150 300 600Stroke (mm) 50 to 300 (50pitch) Lost motion 0.1mm or lessRotating backlash (°) +/-0.05Overall length (mm)
Horizontal Stroke+263Vertical Stroke+303
Maximum outside dimension of body cross-section (mm) W48 × H58
Cable length (m) Standard: 1 / Option: 3, 5, 10
Note 1. The maximum speed needs to be changed in accordance with the payload. See the “Speed vs. payload” graph shown on the right. For details, see P. 128. Additionally, when the stroke is long, the maximum speed is decreased due to the critical speed of the ball screw. See the maximum speed table shown at the lower portion of the drawing.
Controller Operation method
TS-S2TS-SH
I/O point trace /Remote command
Controller Operation method
TS-SD Pulse train control
Origin on the non-motor side is selectable: Lead 6, 12
Note 1. See P.129 for grease gun nozzles.Note 2. When “2mm lead” is selected, the origin position
cannot be changed (to non-motor side).Note 3. If changing from the origin position at the time of
purchase, the machine reference amount must be reset. For details, refer to the manual.
Note 4. The robot cable is flexible and resists bending.Note 5. See P.498 for DIN rail mounting bracket.Note 6. Select this selection when using the gateway
function. For details, see P.60.
S2Robot positioner I/OS2: TS-S2 Note 5 NP: NPN
PN: PNPCC: CC-LinkDN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 6
SHRobot positioner I/O BatterySH: TS-SH NP: NPN B: With battery
(Absolute)PN: PNPCC: CC-Link N: None
(Incremental)DN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 6
SD 1Robot driver I/O cable
SD: TS-SD 1: 1m
Note. See P.129 for running life distance to life time conversion example.
Ordering method
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts YP-X
CLEA
NCO
NTRO
LLERINFO
RMATIO
N
Lin
ea
r convey o
r m
od
ule
s
LCM
100
145Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
SRD04
SRD04 Space-saving model (motor installed on top)
112
152 (with brake)
L1(T-slot range)9.5
67.5
6
102.
5
See Note 5.
Effective strokeL 42.5+/-2
ф19
4545
Approx. 245 (Cable length)
45 2210.5Effective stroke+100.5
ф10
Origin on motor side
Origin on non-motor side (Note 9)
253030 30
105126135
20 30 34 45
48
4821
156.5
22.5
56(24)
(31)
(15)
(40)
45
0.5
44
100
10
20
25 57 7110
(22.
5)
9.5
6
M4×0.7 Depth 5(For securing cable)
16.5
(7.8
)
9.5
1.5
5
3.35.8
Detail of section B
5.5M3x0.5 M10x1.25
Dimensions of attachedsquare nut for T-slot (6 pcs.)
2.417
(19.
6)
Dimensions of attached nut
6
B
(5(Note 8))
(7(Note 8))
Ball screw greasing port (ф6.5)
M4×0.7 Depth 5(For securing cable)
2-ф6.6drill-through
* Contents of option: Plate, 2 pcs., Nut, 12 pcs. See our robot manuals for additional settings.
Option: Horizontal installation plate (foot)
T-slot for M3 (4 locations)
Installed within the T-slot range of the main unit.(Hex. socket head cap bolt (M3×0.5), Length under head 10)* Six bolts are required for one plate.
8-M5×0.8 Depth 12(For user tool installation)
4-M5×0.8 drill-through(For main unit installation)
Effective stroke 50 100 150 200 250 300
L1 162.5 212.5 262.5 312.5 362.5 412.5
L 209.5 259.5 309.5 359.5 409.5 459.5
Weight (kg) Note 7 2.2 2.6 2.9 3.2 3.5 3.9
Maximum speed for each
stroke (mm/sec)
Lead 12 500 440 320
Lead 6 250 220 160
Lead 2 80 72 53
Note 1. It is possible to apply only the axial load. Use the external guide together so that any radial load is not applied to the rod.
Note 2. The orientation of the width across flat part is undefined to the base surface.
Note 3. Use the support guide together to maintain the straightness.Note 4. When running the cables, secure cables so that any load is not applied to them.Note 5. Remove the M4 hex. socket head cap set bolts and use them to secure the cables. (Effective screw thread depth 5)Note 6. The cable’s minimum bend radius is R30.Note 7. Models with a brake will be 0.2kg heavier.Note 8. Distance to mechanical stopper.Note 9. For lead 2mm specifications, the origin on the non-motor side cannot be set.
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts Y
P-XC
LEAN
CON
TROLLER
INFORM
ATION
Lin
ea
r convey o
r m
od
ule
s
LCM
100
146 Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
Running life
Basic specifications Speed vs. payload
SR05 Rod type
SR05-S SR05-R
Controller
SR05 Straight model
* Contents of option: Plate, 2 pcs., Nut, 8 pcs. See our robot manuals for additional settings.
View A
Dimensions of attached nut
A
M4×0.7 Depth 5(For securing cable)
9.5
7 19 M12×1.25
(21.
9)
Ball screw greasing port(φ6.5)9.
5
789.5
18
See Note 5.
9.5 (Width across flat part)24
(7) (5)
Effective stroke45.5±2
φ25
45°
3055
17 (Width across flat)
17 (Width across flat)
30T-slot for M4 (8 locations)
4-M5×0.8 Depth 10(90°-equal division)
M12×1.25
(10) 35.5
Origin on motor side Origin on
non-motor side55
P.C.D.65
Dimensions of attached square nut for T-slot (6 pcs.) Details of T-slot
5000 km on models other than shown below.Running life of only the model shown below becomes shorter than 5000 km depending on the payload, so check the running life curve.
0
1000
2000
3000
4000
5000
6000
0 5 10 15 20 25 30
Lead 2Vertical
Run
ning
life
(km
)
Payload (kg)
Note. See P.129 for running life distance to life time conversion example.
0
10
20
30
40
50
6070
0 50 100 150 200 250 300 350
0
5
10
15
20
25
3035
0 50 100 150 200 250 300 350
Pay
load
(kg
)
Speed (mm/s)
Pay
load
(kg
)
Speed (mm/s)
Vertical
Horizontal
Lead 6Lead 2
Lead 2
Lead 12
Lead 6
Lead 12
Effective stroke 50 100 150 200 250 300
L1 183 233 283 333 383 433
L 280.5 330.5 380.5 430.5 480.5 530.5
Weight (kg) Note 10 2.2 2.6 3.0 3.3 3.7 4.1
Note 1. It is possible to apply only the axial load. Use the external guide together so that any radial load is not applied to the rod.
Note 2. The orientation of the width across flat part is undefined to the base surface.Note 3. Use the support guide together to maintain the straightness.Note 4.For lead 2mm specifications, the origin on the non-motor side cannot be set.Note 5.When the lead is 2mm, this dimension is 27mm.Note 6. When running the cables, secure cables so that any load is not applied to them.Note 7. Remove the M4 hex. socket head cap set bolts and use them to secure the cables. (Effective screw thread depth 5)Note 8. The cable’s minimum bend radius is R30.Note 9. Take great care as the outer case of the motor projects from the bottom of the main unit.Note 10.Models with a brake will be 0.2kg heavier.Note 11.Distance to mechanical stopper.
CE compliance Origin on the non-motor side is selectable: Lead 6, 12
SR05Model Lead Model Brake Origin position Note 2 Bracket plate Stroke Cable length Note 4
12: 12mm S: Straight model N: With no brake N: Standard Note 3 N: No plate 50 to 300(50mm pitch)
1K: 1m06: 6mm R: Space-saving model Note 1
(motor installed on right)B: With brake Z: Non-motor side H: With plate 3K: 3m
02: 2mm V: With flange 5K: 5mL: Space-saving model Note 1 (motor installed on left)
Max. pressing force (N) 250 550 900Stroke (mm) 50 to 300 (50pitch) Lost motion 0.1mm or lessRotating backlash (°) +/-1.0Overall length (mm)
Horizontal Stroke+276Vertical Stroke+316
Maximum outside dimension of body cross-section (mm) W56.4 × H71
Cable length (m) Standard: 1 / Option: 3, 5, 10
Note 1. The maximum speed needs to be changed in accordance with the payload. See the “Speed vs. payload” graph shown on the right. For details, see P. 128.
Controller Operation method
TS-S2TS-SH
I/O point trace /Remote command
Controller Operation method
TS-SD Pulse train control
Note 1. See P.129 for grease gun nozzles.Note 2. When “2mm lead” is selected, the origin position
cannot be changed (to non-motor side).Note 3. If changing from the origin position at the time of
purchase, the machine reference amount must be reset. For details, refer to the manual.
Note 4. The robot cable is flexible and resists bending.Note 5. See P.498 for DIN rail mounting bracket.Note 6. Select this selection when using the gateway
function. For details, see P.60.
Motor installation (Space-saving model)Motor installed on rightR type
Motor installed on leftL type
S2Robot positioner I/OS2: TS-S2 Note 5 NP: NPN
PN: PNPCC: CC-LinkDN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 6
SHRobot positioner I/O BatterySH: TS-SH NP: NPN B: With battery
(Absolute)PN: PNPCC: CC-Link N: None
(Incremental)DN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 6
SD 1Robot driver I/O cable
SD: TS-SD 1: 1m
Ordering method
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts YP-X
CLEA
NCO
NTRO
LLERINFO
RMATIO
N
Lin
ea
r convey o
r m
od
ule
s
LCM
100
147Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
SR05 Space-saving model (motor installed on left)
Dimensions of attachedsquare nut for T-slot (6 pcs.)
Dimensions of attached nut
A
(10) 35.5
10 249.5(Width across flat part)
M12×1.25
Effective stroke
106
L 45.5+/-2
789.5
9.5
Approx. 245 (Cable length) 146 (with brake)
L1(T-slot range)See Note 5.
Origin on motor side
Origin on non-motor side (Note 9)
(24)
(31)
(40)
(15)
127.5
56.5
P.C.D.65
45°
17 (Widt
h ac
ross
flat)
3017(Width across flat)55
7156
.528
.2
56.4
70 28.5
30 55
9.5
9.5
M4×0.7 Depth 5(For securing cable)
12(2
7.5)
(30) 68 80
1020
(45.5)
55
7083
40
Hex. socket head cap bolt (M5×0.8), Length under head 14
4.37.3
1.5
6
Detail of section B
19
(21.
9)
M12x1.25 7
7(9
.9)
M4x0.7 3.29.5
180.
7(N
ote
11)
View A
B
Ball screw greasing port (ф6.5)
(7(Note 8))
(5(Note 8,Note 12))
M4×0.7 Depth 5(For securing cable)
4-M5x0.8 Depth 10(90°-equal division)
T-slot for M4 (8 locations)
4-ф6.6drill-through
2-ф6.6drill-through
* Contents of option: Plate, 2 pcs., Nut, 8 pcs. See our robot manuals for additional settings.
Option: Vertical installation plate (flange)
Option: Horizontal installation plate (foot)
10
(27.
5)
Installed within the T-slot range of the main unit.(Hex. socket head cap bolt (M4×0.7), Length under head 12)* Four bolts are required for one plate.
Effective stroke 50 100 150 200 250 300
L1 183 233 283 333 383 433
L 227.5 277.5 327.5 377.5 427.5 477.5
Weight (kg) Note 7 2.4 2.8 3.2 3.5 3.9 4.3
Note 1. It is possible to apply only the axial load. Use the external guide together so that any radial load is not applied to the rod.
Note 2. The orientation of the width across flat part is undefined to the base surface.Note 3. Use the support guide together to maintain the straightness.Note 4. When running the cables, secure cables so that any load is not applied to them.Note 5. Remove the M4 hex. socket head cap set bolts and use them to secure the
cables. (Effective screw thread depth 5)Note 6. The cable’s minimum bend radius is R30.Note 7. Models with a brake will be 0.2kg heavier.Note 8. Distance to mechanical stopper.Note 9. For lead 2mm specifications, the origin on the non-motor side cannot be set.Note 10.This unit can be installed with the motor facing up (turned 90 degrees from the
position in this drawing).Note 11.Take great care as the outer case of the motor and cover belt projects from the
bottom of the main unit.Note 12.When the lead is 2 mm, this dimension is 27 mm.
SR05 Space-saving model (motor installed on right)
B
Dimensions of attachedsquare nut for T-slot (6 pcs.)
Dimensions of attached nut
(10) 35.5
9.5(Width across flat part)
9.5
370.
7(N
ote
11)
M12×1.25
Effective stroke
106
L146 (with brake)
45.5+/-2
78
Approx. 245 (Cable length)
9.5
L1(T-slot range)9.5
See Note 5.
Origin on non-motor side (Note 9)
Origin on motor side
(24)
(31)
(40)
(15)
127.5
56.5
45°
17 (W
idth
acro
ss fla
t)
3055
3017(Width across flat)
55
7156
.528
.2
56.4
7028.5T-slot for M4 (8 locations)
9.5
9.5M4×0.7 Depth 5(For securing cable)
12(2
7.5)
(30) 68 80
1020
(45.5)
55(2
8.2)
7083
40
Hex. socket head cap bolt (M5×0.8), Length under head 14
7.3
1.5
6
Detail of section B
19
(21.
9)
M12x1.25 7
7
(9.9
)
M4x0.7 3.2
Ball screw greasing port (ф6.5)
(7(Note 8))
(5(Note 8,Note 12))
4-M5x0.8 Depth 10(90°-equal division)
P.C.D.
65
M4×0.7 Depth 5(For securing cable)
4-ф6.6 drill-through
2-ф6.6drill-through
* Contents of option: Plate, 2 pcs., Nut, 8 pcs. See our robot manuals for additional settings.
Option: Vertical installation plate (flange)
Option: Horizontal installation plate (foot)
Installed within the T-slot range of the main unit.(Hex. socket head cap bolt (M4×0.7), Length under head 12)* Four bolts are required for one plate.
10
10 24
4.3
Effective stroke 50 100 150 200 250 300
L1 183 233 283 333 383 433
L 227.5 277.5 327.5 377.5 427.5 477.5
Weight (kg) Note 7 2.4 2.8 3.2 3.5 3.9 4.3
Note 1. It is possible to apply only the axial load. Use the external guide together so that any radial load is not applied to the rod.
Note 2. The orientation of the width across flat part is undefined to the base surface.Note 3. Use the support guide together to maintain the straightness.Note 4. When running the cables, secure cables so that any load is not applied to them.Note 5. Remove the M4 hex. socket head cap set bolts and use them to secure the
cables. (Effective screw thread depth 5)Note 6. The cable’s minimum bend radius is R30.Note 7. Models with a brake will be 0.2kg heavier.Note 8. Distance to mechanical stopper.Note 9. For lead 2mm specifications, the origin on the non-motor side cannot be set.Note 10.This unit can be installed with the motor facing up (turned 90 degrees from
the position in this drawing).Note 11.Take great care as the outer case of the motor and cover belt projects from
the bottom of the main unit.Note 12.When the lead is 2mm, this dimension is 27mm.
SR05
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts Y
P-XC
LEAN
CON
TROLLER
INFORM
ATION
Lin
ea
r convey o
r m
od
ule
s
LCM
100
148 Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
Running life
Basic specifications Speed vs. payload
SRD05 Rod type (With support guide)
SRD05-S SRD05-U
Controller
SRD05 Straight model
* Contents of option: Plate, 2 pcs., Nut, 8 pcs. See our robot manuals for additional settings.
A
φ12
φ21
78
Ball screw greasing port(φ6.5)
5252
9.5
55
9.5
See Note 3.
View A
9.5 M4×0.7 Depth 5(For securing cable)
18
71
56.4
(28.
2)
157
40 3055
147
13030
44
40 40 40
8-M6×1.0 Depth 15(For user tool installation)
4-M6×1.0 drill-through(For main unit installation)
T-slot for M4 (4 locations)
Details of T-slot (2:1)Dimensions of attached square nut for T-slot (6 pcs.)
3.2 7.37
1.5
4.5
4.3
(9.9
)
M4×0.7
L1(T-slot range)
Effective stroke
(5)(7)
10.5
L+40 (with brake)
M4×0.7 Depth 5(For securing cable)
45.5±2
24
Approx. 250 (Cable length)
9.5L
370.
7(N
ote5
)
Origin on motor side
Origin on non-motor side
28.2
(30)
68
Installed within the T-slot range of the main unit.Hex. socket head cap bolt (M4×0.7), Length under head 12
* Four bolts are required for one plate.
10
2-φ6.680
12(2
7.5)
20
Option: Horizontal installation plate (foot)
Effective stroke+10747
5000 km on models other than shown below.Running life of only the model shown below becomes shorter than 5000 km depending on the payload, so check the running life curve.
0100020003000400050006000
0 5 10 15 20 25 30
Lead 2Vertical
Ru
nn
ing
life
(km
)
Payload (kg)
Note. See P.129 for running life distance to life time conversion example.
0
10
20
30
40
50
60
70
0 50 100 150 200 250 300 350
0
5
10
15
20
25
30
0 50 100 150 200 250 300 350
Pay
load
(kg
)
Speed (mm/s)
Pay
load
(kg
)
Speed (mm/s)
Vertical
Horizontal
Lead 6Lead 2
Lead 2
Lead 12
Lead 6
Lead 12
Effective stroke 50 100 150 200 250 300
L1 183 233 283 333 383 433
L 280.5 330.5 380.5 430.5 480.5 530.5
Weight (kg) Note 8 3.1 3.6 4.1 4.5 5.0 5.5
Note 1. It is possible to apply only the axial load. Use the external guide together so that any radial load is not applied to the rod.
Note 2.For lead 2mm specifications, the origin on the non-motor side cannot be set.Note 3.When the lead is 2mm, this dimension is 27mm.Note 4. When running the cables, secure cables so that any load is not applied to them.Note 5. Remove the M4 hex. socket head cap set bolts and use them to secure the cables.
(Effective screw thread depth 5)Note 6. The cable’s minimum bend radius is R30.Note 7. Take great care as the outer case of the motor projects from the bottom of the main
unit.Note 8. Models with a brake will be 0.2kg heavier.Note 9.Distance to mechanical stopper.
CE compliance
SRD05Model Lead Model Brake Origin position Note 2 Bracket plate Stroke Cable length Note 4
12: 12mm S: Straight model N: With no brake N: Standard Note 3 N: No plate 50 to 300(50mm pitch)
1K: 1m06: 6mm U: Space-saving model Note 1
(motor installed on top)B: With brake Z: Non-motor side H: With plate 3K: 3m
02: 2mm 5K: 5m10K: 10m
Motor 56 Step motor
Resolution (Pulse/rotation) 20480
Repeatability (mm) +/-0.02
Deceleration mechanism Ball screw ϕ12 (Class C10)
Ball screw lead (mm) 12 6 2
Maximum speed Note 1 (mm/sec) 300 150 50
Maximumpayload (kg)
Horizontal 50 55 60
Vertical 8.5 18.5 28.5
Max. pressing force (N) 250 550 900
Stroke (mm) 50 to 300 (50pitch)
Lost motion 0.1mm or less
Rotating backlash (°) +/-0.05
Overall length (mm)
Horizontal Stroke+276
Vertical Stroke+316
Maximum outside dimension of body cross-section (mm) W56.4 × H71
Cable length (m) Standard: 1 / Option: 3, 5, 10
Note 1. The maximum speed needs to be changed in accordance with the payload. See the “Speed vs. payload” graph shown on the right. For details, see P. 128. Controller Operation method
TS-S2TS-SH
I/O point trace /Remote command
Controller Operation method
TS-SD Pulse train control
Origin on the non-motor side is selectable: Lead 6, 12
Note 1. See P.129 for grease gun nozzles.Note 2. When “2mm lead” is selected, the origin position
cannot be changed (to non-motor side).Note 3. If changing from the origin position at the time of
purchase, the machine reference amount must be reset. For details, refer to the manual.
Note 4. The robot cable is flexible and resists bending.Note 5. See P.498 for DIN rail mounting bracket.Note 6. Select this selection when using the gateway
function. For details, see P.60.
S2Robot positioner I/OS2: TS-S2 Note 5 NP: NPN
PN: PNPCC: CC-LinkDN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 6
SHRobot positioner I/O BatterySH: TS-SH NP: NPN B: With battery
(Absolute)PN: PNPCC: CC-Link N: None
(Incremental)DN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 6
SD 1Robot driver I/O cable
SD: TS-SD 1: 1m
Ordering method
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts YP-X
CLEA
NCO
NTRO
LLERINFO
RMATIO
N
Lin
ea
r convey o
r m
od
ule
s
LCM
100
149Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
SRD05
SRD05 Space-saving model (motor installed on top)
B
Dimensions of attachedsquare nut for T-slot (6 pcs.)
78
9.5
(28.
5)9.
5
L1
106146 (with brake)
See Note 5.
Origin on non-motor side (Note 9)
Origin on motor side
12(2
7.5)
(30) 68 80
10
20 Installed within the T-slot range of the main unit.(Hex. socket head cap bolt (M4×0.7), Length under head 12)
7
(9.9
)
M4x0.7 3.2
30 40 44 551
(Not
e 10
)
7028
.5
30
40
147157
40 40130
56.4
56.470.9
(24)
(31)
(40)
(15)
127.
5
(1)
56.5
Effective strokeL 45.5+/-2
5252
ф12
ф21
55
47 24
Effective stroke +107
Approx. 245 (Cable length)
A
4.3
7.3
1.5
6
Detail of section B
9.5
18
View A
9.5
(27.
5)9.
5
M4×0.7 Depth 5(For securing cable)
(5(Note 8,Note 11))(7(Note 8))
2-ф6.6drill-through
M4×0.7 Depth 5(For securing cable)
Ball screw greasing port (ф6.5)
* Contents of option: Plate, 2 pcs., Nut, 8 pcs. See our robot manuals for additional settings.
Option: Horizontal installation plate (foot)
* Four bolts are required for one plate.
T-slot for M4 (4 locations)
10.58-M6×1.0 Depth 15(For user tool installation)
4-M6×1.0 drill-through(For main unit installation)
Effective stroke 50 100 150 200 250 300
L1 183 233 283 333 383 433
L 227.5 277.5 327.5 377.5 427.5 477.5
Weight (kg) Note 7 3.3 3.8 4.3 4.7 5.2 5.7
Note 1. It is possible to apply only the axial load. Use the external guide together so that any radial load is not applied to the rod.
Note 2. The orientation of the width across flat part is undefined to the base surface.
Note 3. Use the support guide together to maintain the straightness.Note 4. When running the cables, secure cables so that any
load is not applied to them.Note 5. Remove the M4 hex. socket head cap set bolts and use
them to secure the cables. (Effective screw thread depth 5)
Note 6. The cable’s minimum bend radius is R30.Note 7. Models with a brake will be 0.2kg heavier.Note 8. Distance to mechanical stopper.Note 9. For lead 2mm specifications, the origin on the non-
motor side cannot be set.Note 10.Take great care as the outer case of the cover belt
projects from the bottom of the main unit.Note 11. When the lead is 2 mm, this dimension is 27 mm.
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts Y
P-XC
LEAN
CON
TROLLER
INFORM
ATION
Lin
ea
r convey o
r m
od
ule
s
LCM
100
150 Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
STH04 Slide table type
Controller Operation method
TS-S2TS-SH
I/O point trace /Remote command
TS-SD NotePulse train control
Note. The robot with the brake cannot use the TS-SD.
Motor 28 Step motorResolution (Pulse/rotation) 4096Repeatability Note 1 (mm) +/-0.05
Drive methodStraight Slide screwSpace-saving Slide screw + belt
Note 1. Return-to-origin position.Note 2. Table movable range during return-to-origin operation. The values in [ ] show those when the return-to-origin direction is changed.Note 3. The minimum bending radius of the motor cable is R30.Note 4. When installing the mechanical main unit using the back facing holes, use the hex socket head cap M5 bolts.Note 5. The installation hole positions of the main unit with the specifications with the brake are common to those shown above.Note 6. Models with a brake will be 0.11kg heavier.
STH04Model Lead Model Brake Note 1 Origin position Bracket plate Note 3 Stroke Cable length Note 4
05: 5mm S: Straight model N: With no brake N: Standard Note 2 N: No plate 50: 50mm 1K: 1m10: 10mm R: Space-saving model
(motor installed on right)B: With brake Z: Non-motor side H: With plate 100: 100mm 3K: 3m
5K: 5mL: Space-saving model (motor installed on left)
10K: 10m
Note 1. For the space saving models (R and L), the specifications with brake are applicable to only 100mm strokes.Note 2. If changing from the origin position at the time of purchase, the machine reference amount must be reset. For details,
refer to the manual.Note 3. Space-saving models (R and L) with the plate cannot be selected.Note 4. The robot cable is flexible and resists bending. Note 5. See P.498 for DIN rail mounting bracket.Note 6. The robot with the brake cannot use the TS-SD.Note 7. Select this selection when using the gateway function. For details, see P.60.
S2Robot positioner I/OS2: TS-S2 Note 5 NP: NPN
PN: PNPCC: CC-LinkDN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 7
SHRobot positioner I/O BatterySH: TS-SH NP: NPN B: With battery
(Absolute)PN: PNPCC: CC-Link N: None
(Incremental)DN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 7
SD 1Robot driver I/O cable
SD: TS-SD Note 6 1: 1m
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts YP-X
CLEA
NCO
NTRO
LLERINFO
RMATIO
N
Lin
ea
r convey o
r m
od
ule
s
LCM
100
151Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
STH04 Space-saving model (motor installed on right)
A
A
L16.5
(2.3)13
Effective stroke
1+/-0.5 [1+/- 0.5]
Origin on motor side(Note 1)
Origin on non-motor side (Note 1)
37
G 8
5+0
.03
+0.0
1
Dep
th 5
(C/2-1)xB 19
B
6
R
24
ф5+0.03+0.01 Depth 5
C-M5x0.8 Depth 6.5
F
5
R4H
9(+0
.030
0)
Dep
th 4
D
(E-1)xD 18
40(2
5)
ф4H9(+0.030 0 )
Depth 4
E-M6x1.0 Depth 12See the cross-sectionaldrawing of A-A.
Note 1. Return-to-origin position.Note 2. Table movable range during return-to-origin
operation. The values in [ ] show those when the return-to-origin direction is changed.
Note 3. The minimum bending radius of the motor cable is R30.
Note 4. When installing the mechanical main unit using the back facing holes, push the slider toward the origin position on the motor side and insert the hex socket head cap (M5) bolt.
Note 5. The dimensions of the specifications with the brake are common to those shown above.
Note 6. The specifications with the brake are applicable to only 100 strokes.
Note 7. Models with a brake will be 0.11kg heavier.
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts Y
P-XC
LEAN
CON
TROLLER
INFORM
ATION
Lin
ea
r convey o
r m
od
ule
s
LCM
100
152 Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
STH06 Slide table type
Controller Operation method
TS-S2TS-SH
I/O point trace /Remote command
TS-SD NotePulse train control
Note. The robot with the brake cannot use the TS-SD.
Motor 42 Step motorResolution (Pulse/rotation) 20480Repeatability Note 1 (mm) +/-0.05
Drive methodStraight Slide screwSpace-saving Slide screw + belt
Note 1. Return-to-origin position.Note 2. Table movable range during return-to-origin operation.
The values in [ ] show those when the return-to-origin direction is changed.
Note 3. The minimum bending radius of the motor cable is R30.Note 4. When installing the mechanical main unit using the back
facing holes, use the hex socket head cap M6 bolts.
Note 5. The installation hole positions of the main unit with the specifications with the brake are common to those shown above.
Note 6. Models with a brake will be 0.34kg heavier.
STH06Model Lead Model Brake Origin position Bracket plate Note 2 Stroke Cable length Note 3
08: 8mm S: Straight model N: With no brake N: Standard Note 1 N: No plate 50: 50mm 1K: 1m16: 16mm R: Space-saving model
(motor installed on right)B: With brake Z: Non-motor side H: With plate 100: 100mm 3K: 3m
150: 150mm 5K: 5mL: Space-saving model (motor installed on left)
10K: 10m
Note 1. If changing from the origin position at the time of purchase, the machine reference amount must be reset. For details, refer to the manual.
Note 2. Space-saving models (R and L) with the plate cannot be selected.Note 3. The robot cable is flexible and resists bending. Note 4. See P.498 for DIN rail mounting bracket.Note 5. The robot with the brake cannot use the TS-SD.Note 6. Select this selection when using the gateway function. For details, see P.60.
S2Robot positioner I/OS2: TS-S2 Note 4 NP: NPN
PN: PNPCC: CC-LinkDN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 6
SHRobot positioner I/O BatterySH: TS-SH NP: NPN B: With battery
(Absolute)PN: PNPCC: CC-Link N: None
(Incremental)DN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 6
SD 1Robot driver I/O cable
SD: TS-SD Note 5 1: 1m
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts YP-X
CLEA
NCO
NTRO
LLERINFO
RMATIO
N
Lin
ea
r convey o
r m
od
ule
s
LCM
100
153Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
STH06
STH06 Space-saving model (motor installed on right)
Cross-sectionaldrawing A-A
Detailed drawing of installation hole
A
A
G 10
52
E-M8x1.25 Depth 16See the cross-sectionaldrawing of A-A.
Weight (kg) Note 6 2.5 3.3 4.26Note 1. Return-to-origin position.Note 2. Table movable range during return-to-origin
operation. The values in [ ] show those when the return-to-origin direction is changed.
Note 3. The minimum bending radius of the motor cable is R30.
Note 4. When installing the mechanical main unit using the back facing holes, push the slider toward the origin position on the motor side and insert the hex socket head cap (M6) bolt.
Note 5. The dimensions of the specifications with the brake are common to those shown above.
Note 6. Models with a brake will be 0.34kg heavier.
STH06 Space-saving model (motor installed on left)
Weight (kg) Note 6 2.5 3.3 4.26Note 1. Return-to-origin position.Note 2. Table movable range during return-to-origin
operation. The values in [ ] show those when the return-to-origin direction is changed.
Note 3. The minimum bending radius of the motor cable is R30.
Note 4. When installing the mechanical main unit using the back facing holes, push the slider toward the origin position on the motor side and insert the hex socket head cap (M6) bolt.
Note 5. The dimensions of the specifications with the brake are common to those shown above.
Note 6. Models with a brake will be 0.34kg heavier.
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts Y
P-XC
LEAN
CON
TROLLER
INFORM
ATION
Lin
ea
r convey o
r m
od
ule
s
LCM
100
154 Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
RF02-N Rotary type / Limit rotation specification
Controller Operation method
TS-S2TS-SH
I/O point trace /Remote command
TS-SD Pulse train control
Motor 20 Step motor
Resolution (Pulse/rotation) 4096
Repeatability Note 1 (°) +/-0.05
Drive method Special warm gear + belt
Torque type Standard High torque
Maximum speed Note 2 (°/sec) 420 280
Rotating torque (N•m) 0.22 0.32
Max. pushing torque (N•m) 0.11 0.16
Backlash (°) +/-0.5
Max. moment of inertia Note 3 (kg•m2) 0.0018 0.004
Cable length (m) Standard: 1 / Option: 3, 5, 10
Rotation range (°) 310
Note 1. Positioning repeatability in one direction.Note 2. The maximum speed may vary depending on the
moment of inertia. Check the maximum speed while referring to the “Moment of inertia vs. Acceleration/deceleration” graph and the “Effective torque vs. speed” graph (reference).
Note 3. For moment of inertia and effective torque details, see P.604.
Note. When purchasing the product, set the controller acceleration while carefully checking the “Moment of inertia vs. Acceleration/Deceleration” and “Effective torque vs. Speed” graphs. For details, please refer to the TRANSERVO Series User’s Manual.
0.0000
0.0005
0.0010
0.0015
0.0020
0.0025
0.0030
0.0035
0.0040
0.0045
100 1000 10000Acceleration/deceleration: ώ (°/s2)
Mom
ent o
f ine
rtia
: I(k
g • m
2 )
High torque
Standard
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0 100 200 300 400 500Speed: ω (°/s)
Effe
ctiv
e to
rque
: T
(N•m
)
High torque
Standard
Allowable load
Moment of inertia Acceleration/deceleration Effective torque vs. speed
RF02-NN Limit rotation specification – Standard model
Approx. 170(Motor cable exit direction: Exit from left side)
ф8 (Through-hole)
7 (Tole
ranc
e ra
nge)
2(T
olera
nce
rang
e)
52
51
52
42
Origin mark
310°
*1
Cross-sectional drawing A-A
5°+/
-1[5
°+/-1
]
CC
W d
irect
ion
CW di
rect
ion
Stroke endOrigin position inCW rotation direction[Origin] *3
Origin *2
Origin position in CCWrotation direction[Stroke end]
*1 Table movable range by return-to-origin operation. Be careful not to interfere with the workpiece or equipment around the table.
*2 Return-to-origin position*3 Values and characters in [ ] show those when the return-to-origin
direction is changed.
Weight (kg) 0.49
Note 1.This drawing is output under the conditions below. Bearing ...................... Standard Torque ....................... Standard/High torque
Note 2.The minimum bending radius of the motor cable is R30.
Note 3.The motor cable exit direction is only the left side.
RF02 N LModel Return-to-origin method Bearing Torque Cable entry location Rotation direction Cable length Note 1
N: Stroke end (Limit rotation) N: Standard N: Standard torque L: From the left N: CCW 1K: 1mH: High rigidity H: High torque Z: CW 3K: 3m
5K: 5m10K: 10m
Note 1. The robot cable is flexible and resists bending.Note 2. See P.498 for DIN rail mounting bracket.Note 3. Select this selection when using the gateway function. For details, see P.60.
S2Robot positioner I/OS2: TS-S2 Note2 NP: NPN
PN: PNPCC: CC-LinkDN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 3
SHRobot positioner I/O BatterySH: TS-SH NP: NPN B: With battery
(Absolute)PN: PNPCC: CC-Link N: None
(Incremental)DN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 3
SD 1Robot driver I/O cable
SD: TS-SD 1: 1m
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts YP-X
CLEA
NCO
NTRO
LLERINFO
RMATIO
N
Lin
ea
r convey o
r m
od
ule
s
LCM
100
155Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
RF02-N
RF02-NH Limit rotation specification – High rigidity model
AA
Origin markManual operation screw(both sides)
(15)
(31)
(40)
(24)
85(2.1) (2.1)
ф42h8( 0-0.039)
ф43h8( 0-0.039)
6
32
142
3H8(
+0.0
14 0
)D
epth
4
2-M6x1.0 Depth 12
76
65.8
16
51 27
2
45° 42 15
2
3H8(+0
.014
0
)
Depth
3.8
30°
3H8( +0.014
0)
Depth 4
P.C.D.32
ф15H8(+0.027 0 )
ф18H8(+0.027 0 )
Approx. 170(Motor cable exit direction:
Exit from left side)
ф8 (Through-hole)
7 (Tole
ranc
e ra
nge)
2(T
olera
nce
rang
e)
10.5
17
52
51
52
42
310°
*1
Cross-sectional drawing A-A
Origin mark
5°+/
-1[5
°+/-1
]
Stroke endOrigin position inCW rotation direction[Origin] *3
Origin *2
Origin position in CCWrotation direction[Stroke end]
*1 Table movable range by return-to-origin operation. Be careful not to interfere with the workpiece or equipment around the table.
*2 Return-to-origin position*3 Values and characters in [ ] show those when the return-to-origin
direction is changed.
CC
W d
irect
ion
CW di
rect
ion 2-ф5.2 drill-through
ф9 deep spot facing, Depth 5.5
6-M4x0.7 Depth 6(60° equally divided.)
Weight (kg) 0.52
Note 1.This drawing is output under the conditions below. Bearing ...................... High rigidity Torque ....................... Standard/High torque
Note 2.The minimum bending radius of the motor cable is R30.
Note 3.The motor cable exit direction is only the left side.
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts Y
P-XC
LEAN
CON
TROLLER
INFORM
ATION
Lin
ea
r convey o
r m
od
ule
s
LCM
100
156 Controller TS-S2 u 490 TS-SH u 490
RF02-S Rotary type / Sensor specification
Controller Operation method
TS-S2STS-SHS
I/O point trace /Remote command
Motor 20 Step motor
Resolution (Pulse/rotation) 4096
Repeatability Note 1 (°) +/-0.05
Drive method Special warm gear + belt
Torque type Standard High torque
Maximum speed Note 2 (°/sec) 420 280
Rotating torque (N•m) 0.22 0.32
Max. pushing torque (N•m) 0.11 0.16
Backlash (°) +/-0.5
Max. moment of inertia Note 3 (kg•m2) 0.0018 0.004
Cable length (m) Standard: 1 / Option: 3, 5, 10
Rotation range (°) 360
Note 1. Positioning repeatability in one direction.Note 2. The maximum speed may vary depending on the
moment of inertia. Check the maximum speed while referring to the “Moment of inertia vs. Acceleration/deceleration” graph and the “Effective torque vs. speed” graph (reference).
Note 3. For moment of inertia and effective torque details, see P.604.
CE compliance
Ordering method
Basic specifications
Controller(a) (b)
Allowable radial load (N)
Allowable thrust load (N) Allowable moment (N•m)(a) (b)
Standard model
Highrigiditymodel
Standard model
Highrigiditymodel
Standard model
Highrigiditymodel
Standard model
Highrigiditymodel
78 86 74 78 107 2.4 2.9
Note. When purchasing the product, set the controller acceleration while carefully checking the “Moment of inertia vs. Acceleration/Deceleration” and “Effective torque vs. Speed” graphs. For details, please refer to the TRANSERVO Series User’s Manual.
0.0000
0.0005
0.0010
0.0015
0.0020
0.0025
0.0030
0.0035
0.0040
0.0045
100 1000 10000Acceleration/deceleration: ώ (°/s2)
Mom
ent o
f ine
rtia
: I(k
g • m
2 )
High torque
Standard
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0 100 200 300 400 500Speed: ω (°/s)
Effe
ctiv
e to
rque
: T
(N•m
)
High torque
Standard
Allowable load
Moment of inertia Acceleration/deceleration Effective torque vs. speed
RF02-SN Sensor specification – Standard model
AA
(15)
(31)
(40)
(24)
85(2.1) (2.1)
ф42h8( 0-0.039)
ф43h8( 0-0.039)
6
3210
3.5
142
3H8(
+0.0
14 0
)D
epth
4
76
65.816
51
152
30°
3H8( +0.014
0)
Depth 4
P.C.D.32
ф15H8(+0.027 0 )
ф18H8(+0.027 0 )
ф8 (Through-hole)
52
51
52
42
(15)
(20)
72
11
4.8
360° *1
CC
W d
irect
ion
CW
dire
ctio
n
Manual operation screw(both sides)
7 (Tole
ranc
e ra
nge)
2(T
olera
nce
rang
e)
2-ф5.2 drill-throughф9 deep spot facing, Depth 5.5
6-M4x0.7 Depth 6(60° equally divided.)
2-M6x1.0 Depth 12
Approx. 170(Motor cable exit direction: Exit from left side)
Approx. 300(Sensor cable exit direction: Exit from left side)
Cross-sectional drawing A-A
*1 Table movable range by return-to-origin operation. Be careful not to interfere with the workpiece or equipment around the table.
*2 The return-to-origin position may differ from that shown in this drawing. To align with the position shown in this drawing, refer to the TS Series User's Manual and change the origin coordinates.
Weight (kg) 0.51
Note 1. This drawing is output under the conditions below. Bearing ...................... Standard Torque ....................... Standard/High torque
Note 2. The minimum bending radii of the motor cable and sensor cable are R30.Note 3. The motor cable exit direction is only the left side.
Limitless rotation
RF02 S LModel Return-to-origin method Bearing Torque Cable entry location Rotation direction Cable length Note 1
S: Sensor (Limitless rotation)
N: Standard N: Standard torque L: From the left N: CCW 1K: 1mH: High rigidity H: High torque Z: CW 3K: 3m
5K: 5m10K: 10m
Note 1. The robot cable is flexible and resists bending.Note 2. See P.498 for DIN rail mounting bracket.Note 3. Select this selection when using the gateway function. For details, see P.60.
S2Robot positioner I/OS2: TS-S2 Note2 NP: NPN
PN: PNPCC: CC-LinkDN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 3
SHRobot positioner I/O BatterySH: TS-SH NP: NPN B: With battery
(Absolute)PN: PNPCC: CC-Link N: None
(Incremental)DN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 3
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts YP-X
CLEA
NCO
NTRO
LLERINFO
RMATIO
N
Lin
ea
r convey o
r m
od
ule
s
LCM
100
157Controller TS-S2 u 490 TS-SH u 490
RF02-S
RF02-SH Sensor specification – High rigidity model
AA
(15)
(31)
(40)
(24)
85(2.1) (2.1)
3H8(
+0.0
14 0
)
Dep
th 4
76
65.816
51
152
30°
3H8( +0.014
0)
Depth 4
P.C.D.32
ф15H8(+0.027 0 )
51
52
42
2-M6x1.0 Depth 12
ф42h8( 0-0.039)
ф43h8( 0-0.039)
6
32
10.5
17
ф18H8(+0.027 0 )
ф8 (Through-hole)
(15)
(20)
72
142
52
11
11.8
360° *1
Cross-sectional drawing A-A
7 (Tole
ranc
e ra
nge)
2(T
olera
nce
rang
e)
Approx. 170(Motor cable exit direction: Exit from left side)
Approx. 300(Sensor cable exit direction: Exit from left side)
2-ф5.2 drill-throughф9 deep spot facing, Depth 5.5
6-M4x0.7 Depth 6(60° equally divided.)
Manual operation screw(both sides)
CC
W d
irect
ion
CW
dire
ctio
n
*1 Table movable range by return-to-origin operation. Be careful not to interfere with the workpiece or equipment around the table.
*2 The return-to-origin position may differ from that shown in this drawing. To align with the position shown in this drawing, refer to the TS Series User's Manual and change the origin coordinates.
Weight (kg) 0.55
Note 1. This drawing is output under the conditions below. Bearing ...................... High rigidity Torque ....................... Standard/High torque
Note 2. The minimum bending radii of the motor cable and sensor cable are R30.Note 3. The motor cable exit direction is only the left side.
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts Y
P-XC
LEAN
CON
TROLLER
INFORM
ATION
Lin
ea
r convey o
r m
od
ule
s
LCM
100
158 Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
RF03-N
Controller Operation method
TS-S2TS-SH
I/O point trace /Remote command
TS-SD Pulse train control
Motor 28 Step motor
Resolution (Pulse/rotation) 4096
Repeatability Note 1 (°) +/-0.05
Drive method Special warm gear + belt
Torque type Standard High torque
Maximum speed Note 2 (°/sec) 420 280
Rotating torque (N•m) 0.8 1.2
Max. pushing torque (N•m) 0.4 0.6
Backlash (°) +/-0.5
Max. moment of inertia Note 3 (kg•m2) 0.012 0.027
Cable length (m) Standard: 1 / Option: 3, 5, 10
Rotation range (°) 320
Note 1. Positioning repeatability in one direction.Note 2. The maximum speed may vary depending on the
moment of inertia. Check the maximum speed while referring to the “Moment of inertia vs. Acceleration/deceleration” graph and the “Effective torque vs. speed” graph (reference).
Note 3. For moment of inertia and effective torque details, see P.604.
Note. When purchasing the product, set the controller acceleration while carefully checking the “Moment of inertia vs. Acceleration/Deceleration” and “Effective torque vs. Speed” graphs. For details, please refer to the TRANSERVO Series User’s Manual.
0.000
0.005
0.010
0.015
0.020
0.025
0.030
100 1000 10000Acceleration/deceleration: ώ (°/s2)
Mom
ent o
f ine
rtia
: I(k
g •
m2 )
High torque
Standard
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0 100 200 300 400 500Speed: ω (°/s)
Effe
ctiv
e to
rque
: T
(N•m
)
High torque
Standard
Allowable load
Moment of inertia Acceleration/deceleration Effective torque vs. speed
RF03-NN Limit rotation specification – Standard model
Cross-sectional drawing A-A
AA
Origin markManual operation screw(both sides)
(15)
(24)
(40)
(31)
Approx. 180(Motor cable exit direction: Exit from left side)
Approx. 180(Motor cable exit direction: Exit from right side)
66
75252
4H8(
+0.0
18 0
)D
epth
5
2-M8x1.25 Depth 16
107(2.4) (2.4)
ф64h8( 0-0.046)
ф63h8( 0-0.046)
4013
4.58
10288.2
20
ф22H8(+0.033 0 )
ф32H8(+0.039 0 )
ф17 (Through-hole)
8 (Tole
ranc
e ra
nge)
2(T
olera
nce
rang
e)
75
66 39
2
45° 42
2324H
8(+0
.018
0
)
Depth
4.8
30°
4H8( +0.018
0)
Depth 5
2-ф6.8 drill-throughф11 deep spot facing, Depth 6.5
P.C.D.48
6-M5x0.8 Depth 8(60° equally divided.)
58
Origin mark
320°
*1
*1 Table movable range by return-to-origin operation. Be careful not to interfere with the workpiece or equipment around the table.
*2 Return-to-origin position*3 Values and characters in [ ] show those when the
return-to-origin direction is changed.
CC
W d
irect
ion
CW di
rect
ion
5°+/
-1[5
°+/-1
]
Stroke endOrigin position inCW rotation direction[Origin] *3
Origin *2
Origin position in CCWrotation direction[Stroke end]
Weight (kg) 1.1
Note 1.This drawing is output under the conditions below. Bearing ... Standard Torque ..... Standard/High torque
Note 2.The minimum bending radius of the motor cable is R30.
N: Stroke end (Limit rotation) N: Standard N: Standard torque R: From the right N: CCW 1K: 1mH: High rigidity H: High torque L: From the left Z: CW 3K: 3m
5K: 5m10K: 10m
Note 1. The robot cable is flexible and resists bending.Note 2. See P.498 for DIN rail mounting bracket.Note 3. Select this selection when using the gateway function. For details, see P.60.
S2Robot positioner I/OS2: TS-S2 Note2 NP: NPN
PN: PNPCC: CC-LinkDN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 3
SHRobot positioner I/O BatterySH: TS-SH NP: NPN B: With battery
(Absolute)PN: PNPCC: CC-Link N: None
(Incremental)DN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 3
SD 1Robot driver I/O cable
SD: TS-SD 1: 1m
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts YP-X
CLEA
NCO
NTRO
LLERINFO
RMATIO
N
Lin
ea
r convey o
r m
od
ule
s
LCM
100
159Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
RF03-N
RF03-NH Limit rotation specification – High rigidity model
AA
Origin markManual operation screw(both sides)
(15)
(24)
(40)
(31)
Approx. 180(Motor cable exit direction:
Exit from left side)
Approx. 180(Motor cable exit direction:
Exit from right side)
66
75
252
4H8(
+0.0
18 0
)D
epth
5
2-M8x1.25 Depth 16
107(2.4) (2.4)
ф64h8( 0-0.046)
ф63h8( 0-0.046)
40
10288.2
20
ф22H8(+0.033 0 )
ф32H8(+0.039 0 )
ф17 (Through-hole)
8 (Tole
ranc
e ra
nge)
2(T
olera
nce
rang
e)
75
66 39
2
45° 42
2324H
8(+0
.018
0
)
Depth
4.8
30°
4H8( +0.018
0)
Depth 5
P.C.D.48
13.5
22
56
8
Origin mark
320°
*1
Cross-sectional drawing A-A
5°+/
-1[5
°+/-1
]
Stroke endOrigin position inCW rotation direction[Origin] *3
Origin *2
Origin position in CCWrotation direction[Stroke end]
CC
W d
irect
ion
CW d
irect
ion
*1 Table movable range by return-to-origin operation. Be careful not to interfere with the workpiece or equipment around the table.
*2 Return-to-origin position*3 Values and characters in [ ] show those when the return-to-origin
direction is changed.
2-ф6.8 drill-throughф11 deep spot facing, Depth 6.5
6-M5x0.8 Depth 8(60° equally divided.)
Weight (kg) 1.2
Note 1.This drawing is output under the conditions below. Bearing ..................... High rigidity Torque ....................... Standard/High torque
Note 2.The minimum bending radius of the motor cable is R30.
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts Y
P-XC
LEAN
CON
TROLLER
INFORM
ATION
Lin
ea
r convey o
r m
od
ule
s
LCM
100
160 Controller TS-S2 u 490 TS-SH u 490
RF03-S Rotary type / Sensor specification
Controller Operation method
TS-S2STS-SHS
I/O point trace /Remote command
Motor 28 Step motor
Resolution (Pulse/rotation) 4096
Repeatability Note 1 (°) +/-0.05
Drive method Special warm gear + belt
Torque type Standard High torque
Maximum speed Note 2 (°/sec) 420 280
Rotating torque (N•m) 0.8 1.2
Max. pushing torque (N•m) 0.4 0.6
Backlash (°) +/-0.5
Max. moment of inertia Note 3 (kg•m2) 0.012 0.027
Cable length (m) Standard: 1 / Option: 3, 5, 10
Rotation range (°) 360
Note 1. Positioning repeatability in one direction.Note 2. The maximum speed may vary depending on the
moment of inertia. Check the maximum speed while referring to the “Moment of inertia vs. Acceleration/deceleration” graph and the “Effective torque vs. speed” graph (reference).
Note 3. For moment of inertia and effective torque details, see P.604.
CE compliance
Ordering method
Basic specifications
Controller(a) (b)
Allowable radial load (N)
Allowable thrust load (N) Allowable moment (N•m)(a) (b)
Standard model
Highrigiditymodel
Standard model
Highrigiditymodel
Standard model
Highrigiditymodel
Standard model
Highrigiditymodel
196 233 197 363 398 5.3 6.4
Note. When purchasing the product, set the controller acceleration while carefully checking the “Moment of inertia vs. Acceleration/Deceleration” and “Effective torque vs. Speed” graphs. For details, please refer to the TRANSERVO Series User’s Manual.
0.000
0.005
0.010
0.015
0.020
0.025
0.030
100 1000 10000Acceleration/deceleration: ώ (°/s2)
Mom
ent o
f ine
rtia
: I(k
g •
m2 )
High torque
Standard
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0 100 200 300 400 500Speed: ω (°/s)
Effe
ctiv
e to
rque
: T
(N•m
)
High torque
Standard
Allowable load
Moment of inertia Acceleration/deceleration Effective torque vs. speed
RF03-SN Sensor specification – Standard model
AA
(15)
(24)
(40)
(31)
66
75
252
4H8(
+0.0
18 0
)D
epth
5
107(2.4) (2.4)
ф64h8( 0-0.046)
ф63h8( 0-0.046)
4013
4.58
102
88.220
ф22H8(+0.033 0 )
ф32H8(+0.039 0 )
ф17 (Through-hole)
75
66
232
30°
4H8( +0.018
0)
Depth 5
P.C.D.48
58
(20)
(15)
94
11
7.8
360°
*1
CC
W d
irect
ion
CW
dire
ctio
n
2-ф6.8 drill-throughф11 deep spot facing, Depth 6.5
6-M5x0.8 Depth 8(60° equally divided.)
Approx. 180(Motor cable exit direction: Exit from left side)
Approx. 180(Motor cable exit direction: Exit from right side)
Approx. 300(Sensor cable exit direction: Exit from left side)
Approx. 300(Sensor cable exit direction: Exit from right side)
2-M8x1.25 Depth 16
8 (Tole
ranc
e ra
nge)
2(T
olera
nce
rang
e)
Cross-sectional drawing A-A
Manual operation screw(both sides)
*1 Table movable range by return-to-origin operation. Be careful not to interfere with the workpiece or equipment around the table.
*2 The return-to-origin position may differ from that shown in this drawing. To align with the position shown in this drawing, refer to the TS Series User's Manual and change the origin coordinates.
Weight (kg) 1.2
Note 1. This drawing is output under the conditions below. Bearing ...................... Standard Torque ....................... Standard/High torque
Note 2. The minimum bending radii of the motor cable and sensor cable are R30.
N: Standard N: Standard torque R: From the right N: CCW 1K: 1mH: High rigidity H: High torque L: From the left Z: CW 3K: 3m
5K: 5m10K: 10m
Note 1. The robot cable is flexible and resists bending.Note 2. See P.498 for DIN rail mounting bracket.Note 3. Select this selection when using the gateway function. For details, see P.60.
S2Robot positioner I/OS2: TS-S2 Note2 NP: NPN
PN: PNPCC: CC-LinkDN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 3
SHRobot positioner I/O BatterySH: TS-SH NP: NPN B: With battery
(Absolute)PN: PNPCC: CC-Link N: None
(Incremental)DN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 3
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts YP-X
CLEA
NCO
NTRO
LLERINFO
RMATIO
N
Lin
ea
r convey o
r m
od
ule
s
LCM
100
161Controller TS-S2 u 490 TS-SH u 490
RF03-S
RF03-SH Sensor specification – High rigidity model
AA
(15)
(24)
(40)
(31)
66
75
252
4H8(
+0.0
18 0
)D
epth
5
107(2.4) (2.4)102
88.220
ф22H8(+0.033 0 )
75
66
232
30°
4H8( +0.018
0)
Depth 5
P.C.D.48
58
(20)
(15)
94
11
ф64h8( 0-0.046)
ф63h8( 0-0.046)
40
8
22
13.5
ф32H8(+0.039 0 )
ф17 (Through-hole)
16.8
360°
*1
CC
W d
irect
ion
CW
dire
ctio
n
2-ф6.8 drill-throughф11 deep spot facing, Depth 6.5
6-M5x0.8 Depth 8(60° equally divided.)
Approx. 180(Motor cable exit direction: Exit from left side)
Approx. 180(Motor cable exit direction: Exit from right side)
2-M8x1.25 Depth 16
Approx. 300(Sensor cable exit direction: Exit from left side)
Approx. 300(Sensor cable exit direction: Exit from right side)
8 (Tole
ranc
e ra
nge)
2(T
olera
nce
rang
e)
Cross-sectional drawing A-A
Manual operation screw(both sides)
*1 Table movable range by return-to-origin operation. Be careful not to interfere with the workpiece or equipment around the table.
*2 The return-to-origin position may differ from that shown in this drawing. To align with the position shown in this drawing, refer to the TS Series User's Manual and change the origin coordinates.
Weight (kg) 1.3
Note 1. This drawing is output under the conditions below. Bearing ..................... High rigidity Torque ....................... Standard/High torque
Note 2. The minimum bending radii of the motor cable and sensor cable are R30.
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts Y
P-XC
LEAN
CON
TROLLER
INFORM
ATION
Lin
ea
r convey o
r m
od
ule
s
LCM
100
162 Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
RF04-N
Controller Operation method
TS-S2TS-SH
I/O point trace /Remote command
TS-SD Pulse train control
Motor 42 Step motor
Resolution (Pulse/rotation) 20480
Repeatability Note 1 (°) +/-0.05
Drive method Special warm gear + belt
Torque type Standard High torque
Maximum speed Note 2 (°/sec) 420 280
Rotating torque (N•m) 6.6 10
Max. pushing torque (N•m) 3.3 5
Backlash (°) +/-0.5
Max. moment of inertia Note 3 (kg•m2) 0.04 0.1
Cable length (m) Standard: 1 / Option: 3, 5, 10
Rotation range (°) 320
Note 1. Positioning repeatability in one direction.Note 2. The maximum speed may vary depending on the
moment of inertia. Check the maximum speed while referring to the “Moment of inertia vs. Acceleration/deceleration” graph and the “Effective torque vs. speed” graph (reference).
Note 3. For moment of inertia and effective torque details, see P.604.
Note. When purchasing the product, set the controller acceleration while carefully checking the “Moment of inertia vs. Acceleration/Deceleration” and “Effective torque vs. Speed” graphs. For details, please refer to the TRANSERVO Series User’s Manual.
0.00
0.02
0.04
0.06
0.08
0.10
0.12
100 1000 10000Acceleration/deceleration: ώ (°/s2)
Mom
ent o
f ine
rtia
: I(k
g •
m2 )
High torque
Standard
0
2
4
6
8
10
12
0 100 200 300 400 500Speed: ω (°/s)
Effe
ctiv
e to
rque
: T
(N•m
)
High torque
Standard
Allowable load
Moment of inertia Acceleration/deceleration Effective torque vs. speed
RF04-NN Limit rotation specification – Standard model
AA
Cross-sectional drawing A-A
127(3) (3)
ф74h8 ( 0-0.046)
ф76h8 ( 0-0.046 )
52
5.510
16
(15)
(31)
(40)
(24)
Approx. 160(Motor cable exit direction:
Exit from left side) Approx. 170(Motor cable exit direction:
Exit from right side)
85
90
2 30
5H8
(+0.0
18 0
)D
epth
5.5
2-M10x1.5 Depth 20
133
Origin mark
90
45
2
8545
° 7026.5
25H
8 (+0
.018
0
)
Depth
5.3
P.C.D.55
30°
5H8 ( +0.018
0)
Depth 5.5
6-M6x1.0 Depth 10(60° equally divided.)
2-ф8.5 drill-throughф14 deep spot facing, Depth 8.5
ф26H8 (+0.033 0 )
11 (Tole
ranc
e ra
nge)
ф20 (Through-hole)ф35H8 (+0.039
0 )
2 (T
olera
nce
rang
e)
320°
Stroke endOrigin position inCW rotation direction[Origin] *3
Origin *2
Origin position in CCWrotation direction
Origin mark
*1
CC
W d
irect
ion
*1 Table movable range by return-to-origin operation. Be careful not to interfere with the workpiece or equipment around the table.
*2 Return-to-origin position*3 Values and characters in [ ] show those when the
return-to-origin direction is changed.
5°+/-1
[5°+/-
1]
114.2
26
Manual operation screw(both sides)
CW di
rect
ion
[Stroke end]
Weight (kg) 2.2
Note 1.This drawing is output under the conditions below. Bearing ...................... Standard Torque ....................... Standard/High torque
Note 2.The minimum bending radius of the motor cable is R30.
N: Stroke end (Limit rotation) N: Standard N: Standard torque R: From the right N: CCW 1K: 1mH: High rigidity H: High torque L: From the left Z: CW 3K: 3m
5K: 5m10K: 10m
Note 1. The robot cable is flexible and resists bending.Note 2. See P.498 for DIN rail mounting bracket.Note 3. Select this selection when using the gateway function. For details, see P.60.
S2Robot positioner I/OS2: TS-S2 Note2 NP: NPN
PN: PNPCC: CC-LinkDN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 3
SHRobot positioner I/O BatterySH: TS-SH NP: NPN B: With battery
(Absolute)PN: PNPCC: CC-Link N: None
(Incremental)DN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 3
SD 1Robot driver I/O cable
SD: TS-SD 1: 1m
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts YP-X
CLEA
NCO
NTRO
LLERINFO
RMATIO
N
Lin
ea
r convey o
r m
od
ule
s
LCM
100
163Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
RF04-N
RF04-NH Limit rotation specification – High rigidity model
Cross-sectional drawing A-A
AA
90
45
2
8545
°
26.52
5H8 (+0
.018
0
)
Depth
5.3
P.C.D.55
30°
5H8 ( +0.018
0)
Depth 5.5
ф26H8 (+0.033 0 )
11 (Tole
ranc
e ra
nge)
ф20 (Through-hole)
ф35H8 (+0.039 0 )
2(T
olera
nce
rang
e)
127(3) (3)
ф74h8 ( 0-0.046 )
ф76h8 ( 0-0.046)
52
15.510
Approx. 170(Motor cable exit direction:
Exit from right side)
85
90
2 30
5H8
(+0.0
18 0
)
Dep
th 5
.5
2-M10x1.5 Depth 20
133
Origin mark
26
70
(15)
(31)
(40)
(24)
Approx. 160(Motor cable exit direction:
Exit from left side)
320°
Origin mark
*1
114.2
26
Manual operation screw(both sides)
CC
W d
irect
ion
CW di
rect
ion
*1 Table movable range by return-to-origin operation. Be careful not to interfere with the workpiece or equipment around the table.
*2 Return-to-origin position*3 Values and characters in [ ] show those when the
return-to-origin direction is changed.
Origin *2
Origin position in CCWrotation direction
[Stroke end]
5°+/-1
[5°+/-
1]
Stroke endOrigin position inCW rotation direction[Origin] *3
2-ф8.5 drill-throughф14 deep spot facing, Depth 8.5
6-M6x1.0 Depth 10(60° equally divided.)
Weight (kg) 2.4
Note 1.This drawing is output under the conditions below. Bearing ...................... High rigidity Torque ....................... Standard/High torque
Note 2.The minimum bending radius of the motor cable is R30.
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts Y
P-XC
LEAN
CON
TROLLER
INFORM
ATION
Lin
ea
r convey o
r m
od
ule
s
LCM
100
164 Controller TS-S2 u 490 TS-SH u 490
RF04-S Rotary type / Sensor specification
Controller Operation method
TS-S2STS-SHS
I/O point trace /Remote command
Motor 42 Step motor
Resolution (Pulse/rotation) 20480
Repeatability Note 1 (°) +/-0.05
Drive method Special warm gear + belt
Torque type Standard High torque
Maximum speed Note 2 (°/sec) 420 280
Rotating torque (N•m) 6.6 10
Max. pushing torque (N•m) 3.3 5
Backlash (°) +/-0.5
Max. moment of inertia Note 3 (kg•m2) 0.04 0.1
Cable length (m) Standard: 1 / Option: 3, 5, 10
Rotation range (°) 360
Note 1. Positioning repeatability in one direction.Note 2. The maximum speed may vary depending on the
moment of inertia. Check the maximum speed while referring to the “Moment of inertia vs. Acceleration/deceleration” graph and the “Effective torque vs. speed” graph (reference).
Note 3. For moment of inertia and effective torque details, see P.604.
CE compliance
Ordering method
Basic specifications
Controller(a) (b)
Allowable radial load (N)
Allowable thrust load (N) Allowable moment (N•m)(a) (b)
Standard model
Highrigiditymodel
Standard model
Highrigiditymodel
Standard model
Highrigiditymodel
Standard model
Highrigiditymodel
314 378 296 398 517 9.7 12.0
Note. When purchasing the product, set the controller acceleration while carefully checking the “Moment of inertia vs. Acceleration/Deceleration” and “Effective torque vs. Speed” graphs. For details, please refer to the TRANSERVO Series User’s Manual.
0.00
0.02
0.04
0.06
0.08
0.10
0.12
100 1000 10000Acceleration/deceleration: ώ (°/s2)
Mom
ent o
f ine
rtia
: I(k
g •
m2 )
High torque
Standard
0
2
4
6
8
10
12
0 100 200 300 400 500Speed: ω (°/s)
Effe
ctiv
e to
rque
: T
(N•m
)
High torque
Standard
Allowable load
Moment of inertia Acceleration/deceleration Effective torque vs. speed
RF04-SN Sensor specification – Standard model
AA
127(3) (3)
ф74h8( 0-0.046 )
ф76h8( 0-0.046 )
52
5.510
16
(15)
(31)
(40)
(24)
85
902 30
5H8(
+0.0
18 0
)D
epth
5.5
2-M10x1.5 Depth 20
133
114.2
26
90
85
26.52
P.C.D.55
30°
5H8( +0.018
0)
Depth 5.5
ф26H8 (+0.033 0 )
ф20 (Through-hole)
ф35H8 (+0.039 0 )
70
(20)
(15)
113
10.8
12
360°
*1
CC
W d
irect
ion
CW
dire
ctio
n
Approx. 300(Sensor cable exit direction: Exit from left side)
Approx. 300(Sensor cable exit direction: Exit from right side)
Approx. 160(Motor cable exit direction: Exit from left side)
Approx. 170(Motor cable exit direction: Exit from right side)
Cross-sectional drawing A-A 11 (Tole
ranc
e ra
nge)
2 (To
leran
ce
range
)
Manual operation screw(both sides)
6-M6x1.0 Depth 10(60° equally divided.)
2-ф8.5 drill-throughф14 deep spot facing, Depth 8.5
*1 Table movable range by return-to-origin operation. Be careful not to interfere with the workpiece or equipment around the table.
*2 The return-to-origin position may differ from that shown in this drawing. To align with the position shown in this drawing, refer to the TS Series User's Manual and change the origin coordinates.
Weight (kg) 2.3
Note 1. This drawing is output under the conditions below. Bearing ...................... Standard Torque ....................... Standard/High torque
Note 2. The minimum bending radii of the motor cable and sensor cable are R30.
N: Standard N: Standard torque R: From the right N: CCW 1K: 1mH: High rigidity H: High torque L: From the left Z: CW 3K: 3m
5K: 5m10K: 10m
Note 1. The robot cable is flexible and resists bending.Note 2. See P.498 for DIN rail mounting bracket.Note 3. Select this selection when using the gateway function. For details, see P.60.
S2Robot positioner I/OS2: TS-S2 Note2 NP: NPN
PN: PNPCC: CC-LinkDN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 3
SHRobot positioner I/O BatterySH: TS-SH NP: NPN B: With battery
(Absolute)PN: PNPCC: CC-Link N: None
(Incremental)DN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 3
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts YP-X
CLEA
NCO
NTRO
LLERINFO
RMATIO
N
Lin
ea
r convey o
r m
od
ule
s
LCM
100
165Controller TS-S2 u 490 TS-SH u 490
RF04-S
RF04-SH Sensor specification – High rigidity model
AA
127(3) (3)(15)
(31)
(40)
(24)
85
90
2 30
5H8(
+0.0
18 0
)D
epth
5.5
2-M10x1.5 Depth 20
133
114.2
26
90
85
26.52
P.C.D.55
30°
5H8( +0.018
0)
Depth 5.5
ф26H8 (+0.033 0 )
70
(20)
(15)
113
12
ф74h8 ( 0-0.046 )
ф76h8 ( 0-0.046 )
52
15.510
26
ф20 (Through-hole)
ф35H8 (+0.039 0 )
20.8
360°
*1
CC
W d
irect
ion
CW
dire
ctio
n 2-ф8.5 drill-throughф14 deep spot facing, Depth 8.5
6-M6x1.0 Depth 10(60° equally divided.)
Approx. 170(Motor cable exit direction: Exit from right side)
Approx. 160(Motor cable exit direction: Exit from left side)
Approx. 300(Sensor cable exit direction: Exit from left side)
Approx. 300(Sensor cable exit direction: Exit from right side)
Cross-sectional drawing A-A
11 (Tole
ranc
e ra
nge)
2(To
leran
ce ra
nge)
Manual operation screw(both sides)
*1 Table movable range by return-to-origin operation. Be careful not to interfere with the workpiece or equipment around the table.
*2 The return-to-origin position may differ from that shown in this drawing. To align with the position shown in this drawing, refer to the TS Series User's Manual and change the origin coordinates.
Weight (kg) 2.5
Note 1. This drawing is output under the conditions below. Bearing ...................... High rigidity Torque ....................... Standard/High torque
Note 2. The minimum bending radii of the motor cable and sensor cable are R30.
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts Y
P-XC
LEAN
CON
TROLLER
INFORM
ATION
Lin
ea
r convey o
r m
od
ule
s
LCM
100
166 Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
Note. Distance from center of slider upper surface to carrier center-of-gravity at a guide service life of 10,000km (This does not warrant the service life of the product.). (Service life is calculated for 600mm stroke models.)
BD04
39.4
27
M4x0.7 Depth 8(For grounding terminal)
20
5.5
6
33(3
5.4)
40
7(Effective stroke+135)53.5
45.3(1.5)
99.7
(2.4
)
34
3H9(+0.025 0 )
Depth 3
8 20 Mx150
150
4 R
63(Note 1)
(103)Effective stroke92.5+/-1
54.5(Note 1) 3H9 (+0.0250 ) Depth 3
3.5
24
40
(72)
LApprox. 230 (Cable length)
(24) (40)
(31)
(15)
Main unit installation reference surface (Note 2)4-M4x0.7 Depth 6.4ф3H9(
Note 1. Position from both ends to the mechanical stopper. (Movable range during return-to-origin)Note 2. When installing using the main unit installation reference surface, make the mating or positioning height
2mm or more higher than the reference surface since the R-chamfering is provided on the main unit. (Recommended height, 5mm)
Note 3. The minimum bending radius of the motor cable is R30.
BD04 48 N NModel Lead Brake Origin position Stroke Cable length Note 1
48: 48mm N: With no brake N: Standard 300: 300mm 1K: 1m500: 500mm 3K: 3m600: 600mm 5K: 5m700: 700mm 10K: 10m800: 800mm900: 900mm1000: 1000mm
Note 1. The robot cable is flexible and resists bending. Note 2. See P.498 for DIN rail mounting bracket.Note 3. Select this selection when using the gateway function. For details, see P.60.
S2Robot positioner I/OS2: TS-S2 Note2 NP: NPN
PN: PNPCC: CC-LinkDN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 3
SHRobot positioner I/O BatterySH: TS-SH NP: NPN B: With battery
Note 1. Position from both ends to the mechanical stopper. (Movable range during return-to-origin)Note 2. When installing using the main unit installation reference surface, make the mating or positioning height 2mm or more higher than the reference surface since the R-chamfering is provided on the main unit.
(Recommended height, 5mm)Note 3. The minimum bending radius of the motor cable is R30.
Note. Distance from center of slider upper surface to carrier center-of-gravity at a guide service life of 10,000km (This does not warrant the service life of the product.). (Service life is calculated for 600mm stroke models.)
BD05 48 N NModel Lead Brake Origin position Stroke Cable length Note 1
48: 48mm N: With no brake N: Standard 300: 300mm 1K: 1m500: 500mm 3K: 3m600: 600mm 5K: 5m700: 700mm 10K: 10m800: 800mm900: 900mm1000: 1000mm1200: 1200mm1500: 1500mm1800: 1800mm2000: 2000mm
Note 1. The robot cable is flexible and resists bending.Note 2. See P.498 for DIN rail mounting bracket.Note 3. Select this selection when using the gateway function. For details, see P.60.
S2Robot positioner I/OS2: TS-S2 Note2 NP: NPN
PN: PNPCC: CC-LinkDN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 3
SHRobot positioner I/O BatterySH: TS-SH NP: NPN B: With battery
(Absolute)PN: PNPCC: CC-Link N: None
(Incremental)DN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 3
SD 1Robot driver I/O cable
SD: TS-SD 1: 1m
Articulate
d rob
ots
YA
Co
mp
act
sing
le-a
xis rob
ots
TRAN
SERVOS
ing
le-a
xis rob
ots
FLIP-X
Lin
ea
r mo
tor
sing
le-a
xis rob
ots
PHA
SER
Ca
rtesia
nro
bo
ts
XY-X
SC
AR
Aro
bo
ts
YK
-X
Pick &
pla
cero
bo
ts Y
P-XC
LEAN
CON
TROLLER
INFORM
ATION
Lin
ea
r convey o
r m
od
ule
s
LCM
100
168 Controller TS-S2 u 490 TS-SH u 490 TS-SD u 500
Note. Distance from center of slider upper surface to carrier center-of-gravity at a guide service life of 10,000km (This does not warrant the service life of the product.). (Service life is calculated for 600mm stroke models.)
BD07
6.5
7.5
30
48
(24) (40)
(31)
(15)
M4x0.7 Depth 8(For grounding terminal)
44
87.6 (Note 1) 5H9 (+0.0300 ) Depth 5
42
5.5
70(122)
ф5H9 (+0.030 0 ) Depth 5
150.6+/-1
R
Effective stroke (135)L
70
Approx. 230 (Motor cable length)
Main unit installation reference surface (Note 2)(1.5) 78.6(2
Note 1. Position from both ends to the mechanical stopper. (Movable range during return-to-origin)Note 2. When installing using the main unit installation reference surface, make the mating or
positioning height 2mm or more higher than the reference surface since the R-chamfering is provided on the main unit. (Recommended height, 5mm)
Note 3. The minimum bending radius of the motor cable is R30.
BD07 48 N NModel Lead Brake Origin position Stroke Cable length Note 1
48: 48mm N: With no brake N: Standard 300: 300mm 1K: 1m500: 500mm 3K: 3m600: 600mm 5K: 5m700: 700mm 10K: 10m800: 800mm900: 900mm1000: 1000mm1200: 1200mm1500: 1500mm1800: 1800mm2000: 2000mm
Note 1. The robot cable is flexible and resists bending. Note 2. See P.498 for DIN rail mounting bracket.Note 3. Select this selection when using the gateway function. For details, see P.60.
S2Robot positioner I/OS2: TS-S2 Note2 NP: NPN
PN: PNPCC: CC-LinkDN: DeviceNetTM
EP: EtherNet/IPTM
PT: PROFINETGW: No I/O boardNote 3
SHRobot positioner I/O BatterySH: TS-SH NP: NPN B: With battery