Clinical Systems Mounting Reference Guide (Monitoring Products) Updated: GE Healthcare Clinical Systems
Clinical SystemsMounting Reference Guide
(Monitoring Products)
Updated:
GE HealthcareClinical Systems
Quick Reference Specifications (Complete specifications can be found in individual service manuals) Note: Due to continuing product innovations, specifications in this document are subject to change without notice.
(Power and BTU ratings are approximate and based on 110VAC)
Height Width Depth Weight Device cm(in) cm(in) cm(in) kg(lb) BTU/hr Power=Watts
Solar 8000/SolarView 8.1(3.2) 33.6(13.2) 34.9(13.7) 5.4(12) 167 50 Solar 8000M/SolarView 8.1(3.2) 35.4(13.9) 33.4(13.3) 5.6(12.3) 106 58 Solar 8000i/UnityView 8.1(3.2) 35.4(13.9) 33.4(13.2) 5.6(12.3) 100 100 Solar 9500 33.2(13.0) 34.8(13.7) 15.6(6.1) 9.0(19.8) 638 200 RAC2 11.9(4.7) 14.5(5.7) 31.2(12.3) 2.3(5.0) Depends on Modules Used RAC2A 11.9(4.7) 14.5(5.7) 34.3(13.5) 1.5(3.3) 119 35 RAC4A :w/o Power 22.9(9.0) 14.5(5.7) 33.5(13.2) 2.9(6.4) Depends on Modules Used :w/Power 22.9(9.0) 14.5(5.7) 38.4(15.1) 3.5(7.9) 238 70 PDM (Typical) 7.0(2.75) 14.6(5.75) 21.6(8.5) 1.1/1.3(2.5/2.8) 10.2 4.5 TRAM Module (Typical) 8.1(3.2) 11.4(4.5) 29.5(11.6) 2.1(4.7) 31/34 10 Discrete Module (Typical) 4.0(1.6) 11.4(4.5) 28.6(11.25) .5-1(1-2.2) Depends on Module Used DASH 3000 26.0(10.25) 28.0(11.0) 20.0(8.0) 5.5(12.0) 240max 75max DASH 4000 27.4(10.8) 29.3(11.5) 24.3(9.5) 5.5(12.2) 240max 75max DASH 5000 28.7(11.3) 30.7(12.2) 23.9(9.4) 6.4(14.0) 240max 75max Eagle 4000(Color/Mono) 32.6(12.8) 32.0(12.5) 14.1(5.6) 7.3(16.0) 240 71 DASHPort Docking Station 13.9(5.5) 27.0(10.5) 20.0(8.0) 1.95(4.3) 75 Current Flat Panel Displays: 15” GE Flat Panel Display 28.2(11.1) 37.5(14.8) 7.1(2.8) 6.0(13.2) 40max 19” GE Flat Panel Display: w/o Stand 35.3(13.9) 43.2(17.0) 7.3(2.9) 8.7(19.2) 50max w/Stand 46.6(18.3) 43.2(17.0) 25.1(9.9) 11.4(25.1) 50max 19” NEC – LCD1990SXi: w/o Stand 33.0(13.0) 40.2(15.8) 8.0(3.1) 6.3(13.8) 52 w/Stand 48.6Ave(17.0) 40.2(15.8) 24.7(9.7) 9.0(19.8) 52 20” NEC – LCD2090UXi: w/o Stand 34.0(13.4) 43.9(17.3) 8.5(3.3) 7.0(15.4) 50 w/Stand 49.1Ave(19.4) 43.9(17.3) 24.7(9.7) 9.7(21.4) 50 iPanel 33.9(13.3) 41.4(16.3) 11.5(4.5) 6.5(14.4) 257max PRN50: w/o Weighted Base 18.5(7.3) 11.6(4.6) 9.3(3.7) 1.2(2.7) 170 50 w/Weighted Base 20.4(8.0) 11.6(4.6) 9.3(3.7) 2.6(5.7) 170 50 RMM 18.5(7.3) 11.6(4.6) 11.4(4.5) 1.8(4.0) 52 15 Transport Pro: w/2 Batt 33.0(13.0) 29.3(11.5) 14.8(5.8) 3.8(8.4) 120max 15 w/TRAM 33.0(13.0) 29.3(11.5) 22.1(8.7) 7.2(15.8) 120max 60 SmartPac: w/o Batt 25.4(10.0) 31.8(12.5) 9.5(3.3) 5.7(12.7) 35 10 w/2 batt 25.4(10.0) 31.8(12.5) 13.6(4.9) 7.5(16.5) 35 10 w/1 Batt & AC Adptr 25.4(10.0) 31.8(12.5) 18.4(6.8) 7.2(16.2) 45 13.4 CIC Controller: Pro 8.0(3.2) 41.0(16.2) 33.0(13.0) 6.6(14.5) 100 100max NightShade 49.1(19.3) 21.1(8.3) 45.0(17.7) 22.9(51.0)max 1000 298max BCM 42.5(16.75) 20.0(7.9) 47.0(18.5) 13.1(29.0)max 1025 300max Unity ID 21.1(8.3) 21.3(8.4) 6.6(2.6) 1.1(2.4) 15 5 Powercom 600A UPS (600VA) 21.0(8.3) 14.0(5.5) 43.6(17.2) 13.8(30.4) Run Time = ~ 55 minutes 7-Jun-07
Fixed Wall Mt
RAC SBS
Wall Arm
Wall Channel(if required)
8000(M)(i)
PDM &/or RAC
Optnl PRN50
Std 19" - or -Optnl 25"
Flat Panel Disp
PDM onlyRAC Below
Wall Arm8000(M)(i)
Optnl PRN50
Std 19" -or-Optnl 25"
Sgl RAC only
Var Height Mt
8000(M)(i) Mt
Flat Pnl Dspl
Std 19" -or-
Opt KyPd Mt
Opt PS Hlstr
VHM Arm Optl 6" Ext
Roll Stand 15"/18" Flt Pnl 2027321-0012017534-001 (+ Keypad Holster)2022676-001
411959-001 -or-416537-006404838-012Nothing Needed, Adptr Plt is on 8000(M)(i)2028150-0022017534-001 (+ Keypad Holster)2034357-001416537-002421358-005
411959-001 -or-416537-006407349-009Nothing Needed, Adptr Plt is on 8000(M)(i)2028150-0022017534-001 (+ Keypad Holster)2022677-001 -or-RAC Mt + 2021967-001404757-005 -or-404757-005 + 405154-009421358-002 or 421358-005
(Other ConfigurationsAvailable, Call for
Further Assistance)
3.8" Cntr Top1 RAC or PDM
8000(M)(i)
Cntr Tp Starter Mtw/Dual RACs or
PDM & RAC
w/No RAC/PDM
8000(M)(i)RAC Adp Plt -or-
Solar 8000(M)(i)
Stacked Base & Dsplw/PDM or RAC SBS
(Use this Configurationto replace P/N's:
416536-004, -005, -006)
Stacked Base & Dsplw/PDM or RAC(s) Below(Use this Configuration
to replace P/N:416536-008)
Display on Top,Base, 1 RAC (or PDM) &
Writer on Pole.Also includes basket.
Optnl 25"
Generic FltPnl
411959-001 -or-416537-0062005961-0012002746-002
2017534-001 (+ Keypad Holster)
2003483-001
2024390-0012022677-001 -or-2004464-001
-or- - - - - - - - - - - - - - - - - - - - - - - - - - - - or -
-or- - - - - - - - - - - - - - - - - - - - - - - - - - - or -
-or- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - or -
Dual RACs -or-
Upgrade Plate
Ceiling Mt
2026285-001 -and- 2024390-001 +
2003706-001 +2017534-001 (+ Keypad Holster) +2027282-001 -or-2022676-001
Dual Ch Clmn
RAC Mt -or-
Flt Pnl MountKypd Mount
-AND-
Base MountBasic
System
Flat Panel Disp
Flat Panel Disp
Flat Panel Disp
Flat Panel Disp
Optnl kypd mt (8000i)
Optnl kypd mt (8000i)
Optnl kypd mt (8000i)
Optnl kypd mt (8000i)
Optnl kypd mt (8000i)
Optnl kypd mt (8000i)
Single RACDual RACs
PDM only
PDM/RAC MtPDM
Single RAC
PDM w/RAC
Wall Channel(if required)
PDM -or- RAC
PDM MtPDM or RAC
PDM Adp Plt
PDM & RAC
2028150-0022017534-001 (+ Keypad Holster)405263-005
2028150-0022017534-001 (+ Keypad Holster)405263-006416537-002 (Qty 1)2034357-001
2028150-0022017534-001 (+ Keypad Holster)405263-0052025420-001416537-002 (Qty 2) -or-2034357-001 + 416537-002 (Qty 1)
Optnl PDM Mt
Wall Channel(if required)
Wl Mt - VHM
Var Height Arm
Wall Channel
Arm Extsn
Flat Pnl Dspl
9500 Mount
Sgl RAC Mt
Std 19" - or -
Optnl 25"
Roll Stand 15"/18" Flt Pnl 2027321-001
2002746-002
2005961-001
411959-001 -or-416537-006Nothing Needed, just confirm flat panel has adptr plt
Nothing Needed, included on 9500
2004464-001
2022719-001
407349-009
2022719-002
411959-001
2004465-001
2014448-001
411959-001
2004465-001
Solar 9500
Display on Top,Base & 1 RAC on Pole.Also includes basket.
DASH X000(Dash X000 = Dash
2000, 3000, 4000 & 5000)
Wl Mt Optn's
Pivot Arm
Lkg VHM Arm
19" Wl ChnlLocking VHM Arm
19" Wl Chnl
Opt RAC2A Mt
Opt RAC2A Mt(Locking Variable
Height Mount Arm)
DASH w/RAC
DASH OnlyCntr/Ped Mt
Wall Mount Options
Counter/PedestalMount Options
-or- - - - - - - - - - - - - - - - - - - - - -or-2007059-001
407349-021 (RAC2A ONLY)
Roll Stand Mt Roll Stand 900276-011
900069-072Monitor on Top,Optional RAC2A on Pole.
Also includes basket.Opt RAC2A Mt
Ceiling Mt
Non-Locking VariableHeight Mount Arm
-or- - - - - - - - - - - - - - - - - - - - - -or-
DASH Only,NO RAC2A Option.
Dual Ch Column
VHM Arm
16" 'M' Arm
8" 'M' Arm
12" 'M' Arm
- AND -Choose one ofthe following
-OR- -OR-
DASH Arm
-AND Choose One-2026285-001 2022719-001 -or-407349-009 -or-2022719-002 2014448-001
See PDM Mtg Options Page
See PDM Mtg Options Page
See PDM Mtg Options Page
PDM IV Pole
Wall Mt
Add'l Optn's
PDM
16" 'M' Arm
8" 'M' Arm
12" 'M' Arm-or-
-or-
Dash X000 WallMount Options
Wall Mt Components forStacked Base & Displayw/Clamp-On RAC Below
Dash X000 Accessories& Mount Options
Variable Height (VHM)WallMount Options
Non-Lock 2002746-002Locking 2014448-001
Monitoring QV Home Page 1Due to product innovations, mounts contained herein are subject to change without notice.
(Form may vary, but fit and function will generally be the same.)
15" Flt Pnl Mtg OptionsStk w/Tlt 2028150-002Rail Mt 2028150-002Counter Mt 2028150-002Vert Stk 2003706-001Pedestal Mt 2002608-001
Wall Mount Components forStacked Base & Display
w/SBS RAC
Next
M Series
VHM
VHM Wall MountComponents forSolar 8000(M) or
Solar 9500
Matrix
DASH
x000
Dash X000Pedestal Mt Options
Dash X000Ceiling Mt Option
5-Wheel Roll Stand& Options forDash X000
Transport ProMount Options
-or-
DASH
x000
PDMMount Options
Dash X000
360°
Dash X000
Optional421358-009
RAC2A/PRN502" Pole/
Wl Chnl Mt
RAC Wl Mt OptionsBlank Arm or
Pivot Arm
RAC Cntr/Pdstl MT2007059-001
Monitoring QV Home Page 2Due to product innovations, mounts contained herein are subject to change without notice.
(Form may vary, but fit and function will generally be the same.)
NextBack
RAC Mts forVHM or M Series ArmsRac4A 2004464-001Rac2A 2004465-001
Clamp-On RACMt Options
RAC2
SingleRAC4
DualRAC4
Slr8000(M) BaseMt Options
Flush 422838-001
Solar MonitoringRoll Stands for
8000(M/i) & 9500
Solar 8000M Keypad MtGeneric - 2017534-001
VHMArms
M SeriesArms
-or-
Solar 8000(M/i) CeilingMount Options
18"/20" Flat PanelDispaly Mtg OIptions
3.8" HighCounter-Top Mount
Options
No RAC
Dual RACsSgl RAC
SBS Solar Base/RACSwing Arm Wall Mt w/WC
405867-001
Additionl 15" Flat PanelMounting Options
Pedestal Mt , Artcld Arm, Pivot Arm & Pole Mt
Flat PanelDisplay
Flat PanelDisplay
Flat PanelDisplay
Monitoring QV Home Page 3Due to product innovations, mounts contained herein are subject to change without notice.
(Form may vary, but fit and function will generally be the same.)
CIC (Bedrock)Mounting Components
MountsBack
Flat Panel/Keyboard/Mouse & CPU WallMount Components
Major Mounting Partsfor Slr8000/8000M
Including Adapter Plates
TRAM RAC CableRelief Kit
2005655-001
PRN50 Mount Options421358-0XX
Unity ID/OctaComm/OctaNetMounts
IV Pole 418616-001Wl Mt 2028791-001
Additional RAC MtOptions for IV Pole/
Rail or Wall Mtg
Solar 7000/8000(M)Remote Control Mt Kits
Eagle 4000Univ Mounting Adptrfor Wall Mt or Rl Stnd
2018454-0011
AWH
AWH
REMOTECONTROL
m a r q u e t t e
REMOTECONTROL
m a r q u e t t e
REMOTECONTROL
m a r q u e t t e
8000
8000M
8000
7000
2021963-001Pole/Rail Clamp
(aka PRC)
2021967-001Mount PDM L-Bracket
2021968-001Mount PDM Mini Dock
2022677-001Mount PDM VHM/M-ArmDn-Post w/PRC & Brkt
2022676-001Mount PDM GCX
Rollstand/Wall Channel(incl's Pole Clmp, Wl Sld & L-Brkt)
2021969-001Mount PRCW/L-Bracket
2034357-001Mount PDM Slide
Adapter Plate
PDM Mounting Options See Notes Below
PDM Mounting Option Notes:This is a quick guide to PDM Mounting options by use:1. 2021963-001, Pole/Rail Clamp (PRC). For use on IV poles w/diameters of 19mm (.75in) to 39mm (1.5in) and 10 x 25 or 8 x 25mm equipment rails.2. 2021967-001, 'L' mounting bracket. For use w/PRC or to mount PDM with mini dock or PDM Dock (either bedside or transport). Can also be used to mount PDM side-by-side onto a RAC mount.3. 2021968-001, Mini-dock mount for PDM. Mounts PDM to 'L' bracket or Slide Adapter Plate.4. 2021969-001, Pole/Rail clamp w/'L' bracket. For use on IV poles w/diameters of 19mm (.75in) to 39mm (1.5in) and 10 x 25mm or 8 x 25mm equipment rails.5. 2022676-001, Roll stand/Wall mt for PDM. Contains mounting parts to allow PDM, w/appropriate dock, to mount to wall channel or 50.8mm (2 in) post.6. 2022677-001, 38.1cm (15in) Downpost mount w/PRC & 'L' bracket. Allows PDM to mount under any 'M' or VHM series wall arm. Does NOT work w/old rectangular style 'VB' series wall arm.7. 2034357-001, Adapter plate for PDM. Allows PDM, w/proper dock, to slide into any standard GCX 5 in mounting plate on wall arms or pedestal mounts.8. 2007059-001, Multi-Use Pedestal/Counter Mt. When used w/2034357-001 Adapter Plate, allows PDM to mount on pedestal or counter top.
IncludesCntr Mt/
Sld Plt Adptr
2034357-001Mount PDM Slide
Adapter Plate
2007059-001Multi-Use Pedestal/
Counter Mt
RAC w/PDM
Mounting optn
2021967-001
2007665-002DASH/Transport Pro
Display BedRail Hook Kit
Display
2021966-002 Notes:1. IV Pole Mount, pn 2021966-002, includes Mounting Plate w/Multiuse Pole clamp and attaching hardware.2. This mount can accommodate IV poles of 19.1mm (3/4 in) to 39 mm (1-1/2 in) diameter. It is also compatible w/Ver 1 & 2 Transport Display.u Important Note - IV pole to be furnished by customer. Suitability of the IV pole, and the base or structural member to which it is secured, to support the Transport Pro, must be determined by the customer. This style mount is recom- mended only for bed or chair mounted IV pole, not stand-alone IV pole.
2007665-002 Notes:1. Bed-Rail Hook Kit, p/n 2007665-002, includes formed hook, inserts and attaching hardware. Can be used w/module chute attached.
Transport Pro Mounting Accessory Options Bed Rail Hook Kit 2007665-002 IV Pole Mount Kit 2021966-002
ModuleChute
2021966-002Pole Mounting Kit
for Display orModule Chute
-or-
Dash X0002006336-001
Cable ManagementHook
2007665-002Bed Rail Hook Kit
(NOT available from GCX)
Mount Option Notes:1. Universal Rear Mount, pn 420707-001, includes rotating clamp w/attaching plate and all hardware. This mount is designed for use on head boards, foot board, side rail, IV poles and wall mounts using handle/clamp attachment.2. Bed Mount, pn 2028477-001, includes mount and installation instruction. Can be used on rails up to 2.5cm (1.0in) width.
Dash X000 Mount Options Universal Rear Mt 420707-001 Bed Mt 2028477-001
Dash X000 Accessory Options Cable Management Hook2006336-001 Bed Rail Hook Kit 2007665-002 Utility Basket 2032212-001
Accessory Notes:1. Dash Accessory Cable Management Hook, p/n 2006336-001, includes formed hook and attaching hardware.2. Dash Accessory Bed-Rail Hook Kit, p/n 2007665-002, includes formed hook, inserts and attaching hardware.3. 6" Utility Basket, p/n 2032212-001, includes 6" Basket w/Cable Mgmt, Wall Channel Slide, 2" Pole Clamps, 8-10mm x 25-40mm Rail Clamp and all attaching hardware.
420707-001Universal Rear Mt
(Clamp Rotates 90° forIV Pole Attachment)
(OptionalMountingPosition)
2032212-001Multi-Use
6" Utility Basket
Dash X000
360°
2028477-001Bed Mount
Wl ChMt
RailMt
Rl StndMt
DASH Wall Mount Options'M' Series Wall Arm w/Pivot See NotesLocking Variable Height (VHM) Arm w/Pivot 2014448-001Upgrade Plate for Non-'M' Series Wall Arms 407349-010
Notes:1. 'M' Series Pivot arm wall mount. See specific p/nfor desired length:8in; p/n 2022719-001, 12in; p/n 407349-009 or16in; p/n 2022729 -002. Arms includes mountingplate, M Series support arm and hardware.2. VHM Locking arm, pn 2014448-001 includesLocking VHM Arm, Mounting Plate w/Extension Barand attaching hardware.Note - When using the Dashport on either arm, theDashport must be modified by adding the spacer,included w/Dashport kit, between the bottom of theDashport and adapter plate.3. Either kit does NOT include optional 48.3 cm (19 in)wall channel. Order p/n 411959-001 if wall channel isrequired.4. RAC2A mount, pn 2004465-001 is optional andordered separately. See note below.Note - Depending upon the style of the wall armused (existing 'box' style or new 'M' series) selectingthe correct RAC2A mount is important. Existingarms use pn 404757-001 and new 'M' series armsuse either pn 404757-001 or pn 2004465-001.5. Maximum allowable supported weight: 13.6 kilograms (30 pounds)
39.4 cm(15.5 in)
2004465-001
OptionalRAC2A Mount
(See note 4)
OptionalRAC2A Mount
(See note 4)
Optional411959-001
48.3 cm (19 in)Seismic Wl Chnl
(See note 3)
M SeriesPivot Arm
(8", 12" or 16"See notes below)
LockingVHM Arm
Optional411959-001
48.3 cm (19 in)Seismic Wall Chnl
(See note 3)
48.3 cm(19.0 in)
15.2 cm(6.0 in)
15.2 cm(6.0 in)
15.2 cm(6.0 in)
10.2 cm(4.0 in)
132.1 TO 152.4 cm(52.0 TO 60.0 in)
FROM FLOOR
CENTERLINE
CLEARANCE (MIN)35.6 cm(14.0 in)
CLEARANCE (MIN)35.6 cm(14.0 in)
12.7 mm(0.5 in)
12.7 cm(5 in)
'M' Series Arm
2014448-001
20°
2014448-001Locking VHMWall Mt Arm
LockingButton
OptionalDashport(See note 2)
2022719-001 (8") =~26.7 cm (10.5 in)
or407349-009 (12") = ~36.8 cm (14.5 in)
or2022719-002 (16") =
~47 cm (18.5 in)
'M' Series Pivot Arm:8" = 2022719-00112" = 407349-009 16" = 2022719-002
407349-010(NOT for 'M'
Series Arms)
19.3 cm(7.6 in)
5.1 cm(2.0 in)
34.9 cm(13.75 in) 47.6 cm
(18.75 in)
22.0 cm(8.66 in)
22.0 cm(8.66 in)
DASH Pedestal & BedRail Mount OptionsDASH Only 2007059-001DASH w/RAC2A 407349-021
2007059-001
407349-021
~ 30.5 cm (12.0 in)Triangular Shaped Base
~7.6 cm(3.0 in)
2007059-001
u 2007059-001 Notes:1. Mount, pn 2007059-001, includes triangular Pedestal base[~30.5cm (12in)], Tilt/Swivel head w/3.2cm (1.25in)pipe, 12.7cm (5in) Mounting plate, and combinationCounter Mt/Slide Plate Adapter.2. Removing the pedestal base and installing the countermt/slide plate adapter allows the mount to be bolted to acounter top or slid into a horizontal rail.3. Mount has limited tilt and swivel.
u 407349-021 Notes:1. Mount, pn 407349-021, includes 30.5cm x 30.5cm(12in x12in) Pedestal base, Tilt/Swivel head w/10.2cm(4in) pipe, 44.45cm (17.5in) Mounting plate, RAC Adapterplate and mounting hardware.2. Mount has limited tilt and swivel.
~ 30.5 cm (12.0 in) Square x.635cm (.25in) Thick Base
~12.1 cm(4.75 in)
~44.45 cm(17.5 in)
DASH
x000
407349-021
RAC2A
DASH
x000Includes Counter Mt/Slide Plate Adapter
DASH X000 Ceiling Mt See Notes Below
DASH X000 Ceiling Mt:ALL parts ORDERED SEPARATELY. 1. This would include: 1) Dual Channel Ceiling Mount Column, p/n 2026285-001 -AND ADD EITHER- 2) 'M' Series Pivot Arm (select length); 8 in; p/n 2022719-001, -or- 12 in; p/n 407349-009, -or- 16 in; p/n 2022719-002 -OR- 2.1) Locking VHM Arm for DASH, p/n 2014448-001.2. The 1 1/2" diameter by 11 1/2" NPT extension pipe length is to be determined at site and is furnished by the customer.
1
8, 12 or 16"'M' Series Arm 2
-or-
Dual ChCeiling MtColumn
LockingVHM Arm
2.1
Extension PipeFurnished by Customer
(See Note 2 below)
61 cm(24 in)
112 cm(44 in)
Dash X000 5-Wheel Stand & OptionsRoll Stand w/ Adptr Plt 900276-011Optional RAC2A Mt 421358-009(May be used w/Dash X000, Dash/Eagle 1000 & Eagle 3/4000. See notes below)
900276-011 Notes:1. Rollstand, pn 900276-011, includes 5-wheel stand,post w/handle, basket and hardware.2. Can be used with Dash X000, Dash/Eagle 1000 orEagle 3000/4000 monitors. See notes below. Note 1: Dash X000 needs no additional adapter plate. Note 2: For use w/Dash/Eagle 1000, pn 407349-018needs to be ordered. Note 3: For use w/Eagle 4000, pn 2018454-001 needsto be ordered.3. Maximum allowable supported weight: 36.3 kilograms (80 pounds).
421358-009 Option Notes:1. RAC2A Mount, pn 421358-009, includes poleclamp, RAC2A mount and all mounting hardware. Roll stand NOT included.2. For use only w/RAC2A w/SAM module and onlyon 900276-011 roll stand w/Dash X000.3. Please note, 421358-009 replaces 900069-072 which has been obsoleted.
900276-011Roll Stand
Optional421358-009
RAC2A/PRN502" Pole/
Wl Chnl Mt
407349-009Wall Mount
(see note 2)
Clamp-onRAC Mt,Single or
Dual RAC's(see note 5)
-Optional-421358-002PRN50 Mt
(see note 6)
-Optional-2003483-001Power Supply
Holster(see note 7)
Solar 8000(M/i) Wall Mount Components for Stacked Base & Display, w/PDM or RAC(s) Below Mounting Arm
Notes:1. All mounting components purchased SEPARATELY. This would include wall mt w/o wall channel(note 2), flat panel display mount (notes 3 & 7), keypad, if required, (note 4), RAC(s)/PDM mount (note 5),optional wall channel (note 2) and optional PRN50 RAC Mount (note 6).2. For wall mount starter, order pn 407349-009, wall mt w/o wall channel. To add wall channel, ifrequired, order pn 411959-001, 48.3 cm (19 in) seismic wall channel.3. Display configurations: 1) Flat Panel displays. 15" and 18" flat panels are stackable. Order Adjustable Stack mount w/independant tilt & swivel, pn 2028150-002. 2) CRT. Call for information.4. Use w/8000i requires additional mounting consideration for the keypad & holster:u For 8000i med grade 15" fp, use 8000i keypad, holster & 8000i holster mt (I-KEYPAD-Cxx-x) -or-u For generic 15/18/19" fp use keypad & holster (I-KEYPAD-Bxx-x) + Generic holster mt (2017534-001).5. For PDM order pn 2022677-001. For RAC & PDM, add 2021967-001 'L' Bracket to side of RAC mount for PDM mounting. For Single RAC order pn 404757-005. For Dual RACs, add pn 405154-009 w/404757-005.6. If optional PRN50 mount is required, order either pn 421358-002 or 421358-005, depending upon use.7. If optional flat panel power supply mount is required, order pn 2003483-001, power supply holster.8. Maximum allowable supported weights: tilt-swivel head = 13.6 kilograms (30 pounds), support arm = 27.2 kilograms (60 pounds).
-Optional-411959-001
48.3cm (19in)Wall Channel
(see note 2)
-Optional-421358-005
PRN50 Clamp-On Mt(see note 6)
2022677-001Mount PDM Down-Post
w/Clamp & L Brktw/PDM -or- w/RAC(s) (& Optn'l PDM)
-Optional-2021967-001
PDM Mt(see note 5)
Solar8000(M/i)Style base
Keypad Holster & Mt(Required for 8000i,
see note 4)
2028150-002Adj Flat Panel DisplayMount w/Tilt & Swivel
(Requires Nothing Elsesee note 3)
Solar 8000(M/i) Wall Mount Components for Stacked Base & Display, SBS w/PDM or Single RAC On Mounting Arm
Notes:1. All mounting components purchased SEPARATELY. This would include wall mt w/o wall channel(note 2), flat panel display mount (notes 3 & 7), keypad, if required, (note 4), Adapter Plate for ONERAC, or PDM (note 5), optional wall channel (note 2) and optional PRN50 Clamp-On Mt (note 6).2. For wall mount starter,order pn 404838-012, wall mt w/o wall channel. Diagonal brace is included withwall mounts. To add wall channel, if required, order pn 411959-001, 48.3 cm (19 in) seismic wall channel.To upgrade an existing wall arm, w/tilt-swivel knob, order 404838-005 44.4 cm (17.5 in) mounting plate.3. Display configurations: 1) Flat Panel displays. 15" and 18" flat panels are stackable. Order Adjustable stack mount w/independant tilt & swivel, pn 2028150-002. 2) CRT. Call for information.4. Use w/8000i requires additional mounting consideration for the keypad & holster:u For 8000i med grade 15" fp, use 8000i keypad, holster & 8000i holster mt (I-KEYPAD-Cxx-x) -or-u For generic 15/18/19" fp use keypad & holster (I-KEYPAD-Bxx-x) + Generic holster mt (2017534-001).5. Adapter Plates: For RAC, use pn 416537-002. For PDM, use pn 2034357-001.6. If optional PRN50 mount is required, order pn 421358-005, Clamp-on mt.7. If optional flat panel power supply mount is required, order pn 2003483-001, power supply holster.8. Maximum allowable supported weights: tilt-swivel head = 36.3 kilograms (80 pounds), support arm w/diagonal brace = 49.9 kilograms (110 pounds).
404838-012Wall Mount
(see note 2)
-Optional-421358-005
PRN50 Clamp-On Mt(see note 6)
416537-002RAC Adapter Plt
(see note 5)
-Optional-2003483-001Power Supply
Holster(see note 7)
-Optional-411959-001
48.3cm (19in)Wall Channel
(see note 2)
Solar8000(M/i)Style base
2034357-001PDM Adapter Plt
(see note 5)
-or-
Keypad Holster & Mt(Required for 8000i,
see note 4)
2028150-002Adj Flat Panel DisplayMount w/Tilt & Swivel
(Requires Nothing Elsesee note 3)
w/PDM -or- w/RAC
-Optional-48.3 cm (19 in)
Seismic Wall Chnl(Ordered separately,
see notes below)
2002746-002Non-Locking
VHM Wall Mt Arm(for Flat Panel/RAC use)
Vertical PositionMounting Platefor Flat Panel
-Optional-2003483-001
Wall Chan MountedPower Supply Holster(ordered separately when
Flat Panel Disp is mounted)
Variable Height (VHM) Support Arm OptionsNon-Locking Arm for Flat Panel Use 2002746-002Locking Arm for Dash/Dashport Use 2014448-001Heavy Duty Arm w/RAC Mt Extension 2028372-001
2014448-001Locking
VHM Wall Mt Arm(for DASH use)
Horizontal Positionfor DASH X000
LockingButton
OptionalDashport
(See notes below)
2028372-001Heavy Duty
VHM Wall Mt Armw/RAC Mt Extension(for Flat Panel/RAC use)
u 2002746-002 Notes:1. Kit, pn 2002746-002 includes Non-Locking VHM Arm, Mount-ing Plate w/Standard Extension Bar and attaching hardware.2. It is recommended that the 2002746-002 Non-Locking VHMarm be used for flat panel display mounting.u 2028372-001 Notes:1. Kit, pn 2028372-001 includes Non-Locking VHM Arm,Mounting Plate w/Extended Extension Bar, RAC mountingplate w/RAC Adapter plate and attaching hardware.u 2014448-001 Notes:1. Kit, pn 2014448-001 includes Locking VHM Arm, MountingPlate w/Standard Extension Bar and attaching hardware.2. If Dash and Dashport are used together, it is recommendedthat the 2014448-001 Locking VHM arm be used.-Additional Notes:Wall mt arms do NOT include 48.3 cm (19 in) wall channel.Order optional p/n 411959-001 as required.-Optional Use Notes:1. If 2002746-002 arm is used w/15" flat panel display,order p/n 2003483-001, opt'l Power Supply Holster separately.2. If 2002746-002 arm is used with Eagle 3000, AdapterPlate, pn 413030-013 must be ordered separately.3. If 2002746-002 arm is used with Eagle 4000, UniversalMounting Adapter, 2018454-001 must be ordered.4. If either Eagle 3000 or 4000 are used for monitor/transportapplication, the 2014448-001 arm is recommended.
5.1 cm(2.0 in)
34.9 cm(13.75 in) 47.6 cm
(18.75 in)
22.0 cm(8.66 in)
22.0 cm(8.66 in)
Vertical Range of Motion
Horizontal Range of Motion
90 90
Solar 8000(M/i) Flush Wall Mounting System(all components purchased separately)
2004464-001RAC4A Mountfor VHM Arm
Optional, IfRequired,
411959-00148.3 cm (19 in)Wall Channel
(see note 4)
2005961-001VHM ArmExtension
2002746-002VHM Arm
2017534-001Flat Panel KeyPad
Holster Bracket(see note 3)
RAC or PDMor RAC w/PDM Mt
VHMArm
6 inExtension
OptionalWl Chnl
OptionalPS Holster
Slr8000(M/i)Flush Mt
KeypadHolsterBracket
5
1
2
3
4
6
7
2024390-001Slr8000(M/i)Flush Mount
Solar8000(M/i)
Style Base
Solar 8000(M/i) VHM Arm Flush Mt Notes:All mounting components purchased SEPARATELY.1. This would include (see illustration at left): 1) Solar 8000(M/i) Base Flush Mount p/n 2024390-001, 2) VHM Arm p/n 2002746-002, 3) 15.2cm (6in) VHM Arm Extension p/n 2005961-001, 4) PDM mt, 2022677-001 -or- RAC mt, p/n 2004464-001, 4.1) PDM/RAC 'L' Bracket mt, 2021967-001, 5) Keypad Holster Bracket Kit, p/n 2017534 -001 for Generic 15/18in flat panel display (also see note 3 below) -and-, 6) IF required, 48.3 cm (19 in) wall channel p/n 411959-001 (also see note 4 below) -and- 7) OPTIONAL Flat Pnl Pwr Sup Holster p/n 2003483-001.2. If PRN50 mount is required, call for options.3. *NOTE*: The Keypad Holster IS NOT included with theKeypad Bracket kit and MUST be purchased separately.For 8000M, order p/n KYPD-Cxx-Axx - or -for 8000i order I-KEYPAD-Bxx-x4. If longer wall channel required, see options listed onMajor Mounting Parts page, in rear of manual.5. Maximum allowable supported weight: VHM Arm = 13.6 kilograms (30 pounds)
Optional2003483-001Power Supply
Holster
2022677-001PDM Mountfor VHM Arm
-or-
-or-
w/RAC -or- w/PDM
4.1
2021967-001PDM 'L' Bracket
2004464-001RAC4A Mountfor VHM Arm
2005961-001VHM ArmExtension
2002746-002VHM Arm
Touch ScreenFlat Panel Display
Solar 9500 Flush Wall Mounting System(all components purchased separately)
VHMArm
Extension
RACMount
OptionalWall
Channel
OptionalPS Holster
RAC4
Optional, IfRequired,
411959-00148.3 cm (19 in)Wall Channel
(see note 2)
Optional2003483-001Power Supply
Holster
5
4
1
3
2
Slr 9500 VHM Arm Flush Mt Notes:All mounting components purchased SEPARATELY.1. This would include (see illustration at left): 1) VHM Arm p/n 2002746-002, 2) VHM Arm Extension (required) p/n 2005961-001, 3) RAC Mount for VHM Arm p/n 2004464-001 and, 4) IF required, 48.3 cm (19 in) wall channel p/n 411959-001 (also see note 2 below) -and- 5) OPTIONAL Flat Panel Power Supply Holster p/n 2003483-001.(*NOTE* - The 9500 comes with slide mounting attachmentfrom production, so no additional mounts are required.)2. If longer wall channel required, see options listed onMajor Mtg Parts page, in rear of manual.3. Maximum allowable supported weight: VHM Arm = 13.6 kilograms (30 pounds)
Flat Panel Display Mount Options (for 15"/18"/20") Adjustable Stack/Cntr/Rail Mt w/Tilt & Swivel (15"/18"/20") 2028150-002 Slr8000(M/i) Vertical Stack Mt 2003706-001 Adjustable Pedestal Mount 2002608-002 (See notes below)
2028150-002 =~31.4cm (12.4in)
2028150-002
2002608-002Adj Flat Panel Display & PSTable Mount, for use w/Solar
8000/8000(M/i) or 9500
2028150-002Slr8000(M/i) AdjustableStack Mt w/Tilt & Swivelfor Flat Panel Display.
For Stack Mt, Counter Mtor Rail Mt Applications
(Does Not include flt pnl adptr plt)
u 2028150-002 Notes:1. Adjustable Stack Mount, pn 2028150-002, includes Tilt/Swivel head, 30.5cm(12in) post, counter mt/slide plate, base plate and all attaching hardware. *NOTE*: Attaches directly to Base cover, NO Cover Plate Mount required.Will work on Slr8000/8000M/8000i and CIC Bedrock.2. Mount does not include flat panel adapter plate. If required, order either2004031-001 for 75 x 75mm VESA pattern (15" fp) or 2017532-001 for 100 x100mm VESA pattern (18/20" fp).3. Optional/As Required: pn 2003483-001 Power Supply Holster Mt. Mountson rear of adjustable collar.4. Note: Mounts, pn 2001622-001, 2001623-001, 2001631-001, 2014099-001 &2028150-001, are NO LONGER AVAILABLE and are ALL REPLACED by 2028150-002.u 2003706-001 Notes:1. Vertical Stack Mount, pn 2003706-001, consists of manual tilt/swivel head,Solar 8000 base mounting plate and attaching hardware.Flat panel adapter plate not included w/mount. See 2028158-002 Note 2 above.2. This configuration REQUIRES the following additional mounting parts:Slr8000 style Base Flush Mount, pn 2024390-001, 48.3 cm (19 in) optional Wallchannel, pn 411959-001 & if required, Optional Pwr Sply Hlstr, pn 2003483-001.All parts ordered separately.3. If keypad is to be mounted to the display, see keypad bracket 2017534-001.u 2002608-002 Notes:1. Adjustable Pedestal Mt, 2002608-002, includes 30.5cm X 30.5cm (12in X 12in)bottom plate, 25.4cm (10in) post w/height adj manual tilt/swvl plate, pwr sup holsterand handle. It also includes 10.2cm (4in) channel for mounting Solar base.The new 2002608-002 mt replaces 2002608-001, which is now obsolete.2. See 2028150-002 Note 2, above, if flat panel display adapter plate is required. cNOTE: Use w/8000i requires add'l mtg consideration for the keypad & holster:u For 8000i med grade 15" fp, use 8000i keypad, holster & 8000i holster mt(I-KEYPAD-Cxx-x) -or-u For generic 15/18/19" fp use keypad & holster (I-KEYPAD-Bxx-x) + Genericholster mt (2017534-001).
Stack MountApplication
Rail MountApplication
(w/Base PltRemoved)
Optl Pwr Sply Hlstr2003483-001
Counter MountApplication
(w/Base PltRemoved)
Tilt/Swivel Headw/Adj Collar
30.5cm (12in) Post
Counter Mt/Slide Plate
Base Plate
2003706-001Solar 8000M CPU
Vertical Stack Mount(Does Not include flt pnl
adapter plate)
-or-
-or-
Additional 15" Flat Panel Display Mt Options Articulated Arm Wall Mount See Notes BelowPivot Arm Wall Mount See Notes BelowPole Mount See Notes Below Dual Flat Panel Starter 2027328-001(See notes Below)
u Articulated or Pivot Arm Configuration Notes:1. All parts ordered separately. See notes 2 or 3, below, for necessary parts.2. Articulated Arm configuration requires:407349-022; 30.5 cm x 30.5 cm (12 in x 12 in) M Series Articulated arm,optional (if required) 411959-001 48.3 cm (19 in) Wall Channel w/mtg hardwareand optional (as required) 2003483-001 Power Supply Holster.3. Pivot Arm/Flush Mt configuration requires:'M' Series Pivot Block arm, select length: 8in; p/n 2022719-001, 12in; p/n407349-009 or 16in; p/n 2022729 -002, -or- Flush Mt, p/n 2019472-001, optional (if required) 411959-001 48.3 cm (19 in) Wall Channel w/mtg hardwareand optional (as required) 2003483-001 Power Supply Holster.4. Flat Panel Display Adapter Plate is generally included w/display, when displayis purchased from GE. If adapter plt is required, order 2004031-001 for 75MMVESA mounting pattern, or 2017532-001 for 100MM VESA mounting pattern.u Pole Mount Notes:1. All parts ordered separately. Order the following:'M' Series Pivot Block arm, select length: 8in; p/n 2022719-001,12in; p/n 407349 -009 or 16in; p/n 2022729 -002, -or- Flush Mt; p/n 2019472-001,407349-027; 17.8 cm (7 in) Wall Channel w/V-Block Pole Mount Clamp withmtg hardware and Optional (as required) 2003483-001 Power Supply Holster.2. This pole mount can be used on poles with diameters from 2.5 cm (1 in)to 5.1 cm (2 in).3. Flat panel display Adptr Plts are usually included w/display. See note 4 above.PLEASE NOTE : The 6in Pivot Arm Mt, pn 420855-012 has been obsoletedand replaced by these parts.u Dual Flat Panel Mount Notes:1. Dual Flat Panel Starter Mt, 2027328-001, consists of: 61cm (24in) Cross Barw/2 - 5" Tilt/Swivel mounting plates, 5" extension and all attaching hardware.*Note* - this is only a starter mount and will require additional mountingcomponents to complete the mounting system.2. For wall mounting applications, p/n 2022717-001, 'M' series Blank Arm isrequired.
Up to5.1cm (2in)
Pole Dia
Flat PanelDisplay
Flat Panel DispAdapter Plate
(Generally includedw/Flat Panel Display.See note 4 below.)
15" Flt PnlDisplay -or-
'M' Series Arm
90
90
90
SWIVEL
SWIVEL
407349-022
90
90
SWIVEL
~61 cm(~24 in)
SWIVEL
90
SWIVEL
Wall MtChnl
Pole MtChnl
-or-
Optional411959-001
48.3 cm (19 in)Wall Channel
407349-02212x12 Articulated
Arm Wall Mt
Optional2003483-001
Pwr Sup Holstr
Articulated or PivotArm Configurations
Optional2003483-001
Pwr Sup Holstr
407349-027Pole Mt
w/7" Chnl
'M' Series Pivot Arm:8" = 2022719-00112" = 407349-009 16" = 2022719-002
2022719-001 (8") =~26.7 cm (10.5 in)
-or-407349-009 (12") = ~36.8 cm (14.5 in)
-or-2022719-002 (16") =
~47 cm (18.5 in)-or-
2019472-001 Flush = ~12.7 cm (5.0 in)
'M' Series Pivot Arm:8" = 2022719-00112" = 407349-009 16" = 2022719-002
Flush Mount2019472-001
-or-
Flat Panel DisplayAdapter Plate
(Generally includedw/Flat Panel Display.See Note 4 below.)
2027328-001Dual Flat PanelWall Mt Starter
2022717-00130.5cm (12in)
'M' Series Pivot-Block Blank Arm
Large Screen (18" or 20") Flat Panel Mounting OptionsWall Mount Components See NotesCeiling Mount Components See Notes
Wall Mt Options:Pivot Arm or Flush Mt
(NOT in kit form, all partsordered separately)
M Series Pivot Arm
MOUNTING FLANGE
ESCUTCHEONRING
3.8 cm (1.5 in) Dia Pipe.Length to be determinedat Site & Furnished By
CUSTOMER
FALSE CEILING
PREMANENT MOUNTING SURFACE
See Specificmounting arm
used 2026285-001
45.7 cm(18.0 in)
18"/20" FlatPanel Display
90
90
SWIVEL
SWIVEL
90
2019472-001Flush Mount
Optional411959-001
48.3 cm (19 in)Wall Channel
Optional2003483-001
Pwr Sup Holstr
-or-
~12.7 cm(~5.0 in)
2019472-001
90
90
SWIVEL
90
2017532-001Univ Adptr Plt
2022719-001 (8") =~26.7 cm (10.5 in)
or407349-009 (12") = ~36.8 cm (14.5 in)
or2022719-002 (16") =
~47 cm (18.5 in)
'M' Series Pivot Arm:8" = 2022719-001
12" = 407349-009 16" = 2022719-002
FlushMt
8, 12 or 16"'M' Series
Arm
VHMArm
-or-
-or-
Dual ChCeiling MtColumn
18"/20" FlatPanel Display
2017532-001Univ Adptr Plt
~6.3 cm(2.5 in)
Ceiling Mt Options:Pivot Arm, VHM Arm or Flush Mt
(NOT in kit form, all partsordered separately)
Mounting Notes (All parts ordered separately)1. This would include: 1) Flush Mt, 2019472-001 -OR- 1.1) 'M' Series Pivot Arm (select length): 8 in; p/n 2022719-001, -or- 12 in; p/n 407349-009, -or- 16 in; p/n 2022719-002 -OR- 2.3) VHM Arm, 2002746-002. -AND ADD (if required)- Universal 75MM Adapter Plate, 2004031-001 -or- Universal 100MM Adapter Plate, 2017532-001-and (as required)- -Optional- 48.3 cm (19 in) Wall Channel, 411959-001. -Optional- Power Supply Holster, 2003483-001.
Mounting Notes (All parts ordered separately)2. This would include: 1) Dual Channel Ceiling mt column, 2026285-001 -AND- Add choice of display mount: 2.1) Flush Mt, 2019472-001 -OR- 2.2)'M' Series Pivot Arm (select length): 8 in; p/n 2022719-001, -or- 12 in; p/n 407349-009, -or- 16 in; p/n 2022719-002 -OR- 2.3) VHM Arm, 2002746-002. -AND ADD (if required)- Universal 75MM Adapter Plate, 2004031-001 -or- Universal 100MM Adapter Plate, 2017532-001-and (as required)- -Optional- Power Supply Holster, 2003483-001.3. The 1 1/2" diameter by 11 1/2" NPT extensionpipe (needed for ceiling mounting) length is to bedetermined at site and is furnished by the customer.
1
2.3
2.2
2.1 1
1.1
2004004-001Keypad Bracket Kit for
Mounting to Original OLDERPlanar Flat Panel Display ONLY. (includes bracket, bushing & screws)
For current Planardisplay, use Generic Kit.
2003416-001Keypad Bracket Kit for
Mounting to Original OLDERTotoku Flat Panel Display ONLY.
(includes R/L bracket, bushing,back plate and screws)
For current Totokudisplay, use Generic Kit.
Keypad Holster Mt for Non-Specific Displays Generic Bracket Kit 2017534-001 Original 15" Planar Specific Bracket Kit See Notes Original 15" Totoku Specific Bracket Kit See Notes
Generic 15/18"Flat Panel
Display
2017534-001Generic Keypad Bracket Kitfor Mounting to 15 or 18"
Flat Panel Display(includes adapter plt,bracket, backing plt
& screws.DOES NOT includeKeypad or Holster)
ORIGINAL Older Displays
Keypad Holster Mount Notes:1. Generic keypad Bracket Kit, pn 2017534-001, is for mountingonto a 'Generic' flat panel displays utilizing the standard VESAmounting patterns, and consists of a flat panel adapter plate,keypad holster bracket, holster backing plate and mtg hardware.See Note 2 for keypad holster ordering information.(The 2017534-001 Generic kit requires that the flat panel displaycontains either the 75mm or 100mm VESA mounting patterns.)2. *IMPORTANT NOTE*: The keypad and holster ARE NOTincluded with any bracket kit and MUST be ordered separately,as required;For 8000/8000M order KYPD-C??-?XX for keypad & holster -or-For 8000i order I_KEYPAD-B??-? for keypad & holster -or-�For Original Planar & Totoku, holster, p/n 2001244-002, may berequired.3. Original Planar : Bracket Kit, pn 2004004-001, is ONLY for mounting onto the ORIGINAL Planar 15" flat panel display (willnot work on CURRENT release Planar displays), & consists ofbracket, bushing and mounting hardware. See Note 2.4. Original Totoku : Bracket Kit, pn 2003416-001, is ONLY formounting onto the ORIGINAL Totoku 15" flat panel display (willnot work on CURRENT release Totoku displays), & consists ofbrackets, back plate, bushing and mtg hardware. See Note 2.
Keypad & Holster,Ordered Separately
(See notes below)
Planar
Totoku
Flush Base Mount OptionGeneric Flush Base Mount (Replaces 422838-001) 2024390-001
2024390-001 Notes:1. Generic Flush Base Mount, p/n 2024390-001, consists of flush mounting piece, wall channel slide and wall channel stop.2. DOES NOT include wall channel, which is optional & ordered separately. If wall channel is required, order p/n 411959-001. Longer, or shorter, wall channels are available, call for information.3. Mount can be used with Solar 8000(M/i) and CIC Bedrock host style bases.4. This mount replaces 422838-001, which is obsolete.
OptionalWall Chan(see note 2)
2024390-001Generic Flush Base Mt
(DOES NOT include Wall Channel)
Solar 8000(M/i)/9500 Dual Channel Roll Stand 2027321-001 for Base/Flt Pnl Disp/RAC/PRN50 & Basket
2027321-001 Dual Channel Roll Stand Notes:1. Roll Stand, pn 2027321-001, is suitable for use w/Solar 8000(M/i)or 9500 and includes 5-wheel dual-channel stand w/handle & basket,5" Tilt/Swivel plate w/LCD handle for flat panel display, RAC mount,Solar base mount (not required for 9500), PRN50 mount and allnecessary mounting hardware.*Note* - Optional PDM mt, p/n 2022676-001 required for PDM use.Mount is optional and ordered separately.*Note* - Adapter plate for flat panel display is generally includedw/flat panel display (see Note 5 for additional information).This roll stand is a direct replacement for 900276-028.2. Use of remote keypad & holster may require additional mountingconsideration. See notes below:u 8000M may require keypad & holster (KYPD-Cxx-xxx) & genericmount (2017534-001) -or- u 8000i may require; for 8000i 15" med grade flat panel use 8000ikeypad, holster & 8000i holster mt (I-KEYPAD-Cxx-x) -or- for use w/generic 15"/18"/19" flat panel, use 8000i keypad & holster(I-KEYPAD-Bxx-x) plus Generic holster mount (2017534-001).3. If Unity ID use is required, order optional 2028791-001 Unity ID mt.4. The distance between the center of the roll stand and the nearestvertical surface varies for each site. Allow for cable clearence andaccess.5. If the customer provides their own flat panel displays, and requiresadapter plates, order the following optional adapter as required:75mm VESA mounting pattern = 2004031-001 -or-100mm VESA mounting pattern = 2007532-001
66.0 cm(26 in)
134.6 cm(53 in)
2027321-001Roll Stand
for:
Solar 8000(M/i) -or- Solar 9500
Keypad/Holster & Mt(Required for 8000i,May be required for8000M. See note 2)
-or-
Optional2022676-001PDM Mount
(ordered separately)
5
5
Dual Channel Ceiling Mount Column Options Basic Solar 8000(M/i) System See Notes Below Solar 8000(M/i) System w/'M' Series or VHM Arms See Notes Below
'M' Series -or- VHM Arm System:All parts ORDERED SEPARATELY. 1. This would include (reference #'s above): 1) Dual Channel Ceiling Mount Column, pn 2026285-001-AND ADD EITHER- 2) 'M' Series Pivot Arm (select length); 8 in; p/n 2022719-001, -or- 12 in; p/n 407349-009, -or- 16 in; p/n 2022719-002 -OR- 2.1) VHM arm, 2002746-002-AND ADD- 3) Keypad Holster Bracket, 2017534-001 -and-, 4) PDM mt, 2022677-001 or RAC mt, 2004464-001 -and- 5) Solar base Flush Mt, 2024390-001.2. Keypad & holster ordered separately.3. The 1 1/2" diameter by 11 1/2" NPT extension pipe (needed for ceiling mounting) length is to be determined at site and is furnished by the customer.
Basic System:All parts ORDERED SEPARATELY. 1. This would include (reference #'s above): 1) Dual Channel Ceiling Mount Column, pn 2026285-001 -AND ADD- 2) Solar base Flush Mt, 2024390-001 -and-, 3) Flat Panel to 8000(M/i) Base Vertical Stack Mt, 2003706-001 -and-, 4) Keypad Holster Bracket, 2017534-001 -and-, 5) PDM mount, 2022676-001 -or- RAC mount, 2027282-001.2. Keypad & holster ordered separately.3. The 1 1/2" diameter by 11 1/2" NPT extension pipe (needed for ceiling mounting) length is to be determined at site and is furnished by the customer.
12
Dual ChCeiling MtColumn
1
2.1
Solar 8000(M/i)'M' Series or VHM
Ceiling MountSystem Options
Dual ChCeiling MtColumn
4
-or-
2
Solar 8000(M/i)Basic Ceiling MtSystem Options
3
4
'M' ArmSystem
VHM ArmSystem
4
3
3
0.35 RADIANS(20°)
22.9 cm (9.0 in),44.45 cm (17.5 in) or
63.5 cm (25.0 in)
90°
90°
SWIVEL
3 . 8 c m( 1 . 5 i n )
M O U N T I N G F L A N G E
7 . 6 c m( 3 . 0 i n )
1 0 . 2 c m( 4 . 0 i n )
6 . 4 c m( 2 . 5 i n )
5 0 . 8 c m( 2 0 . 0 i n )
M I N I M U M
9.5 cm(3.8 in)
Slr8000(M/i) 9.5 cm (3.8 in) High Counter-Mount Options Base & Display w/No RAC 405263-005 Base & Display w/1 RAC 405263-006 Base & Display w/2 RACs (405263-007 Replacement) See Note 3
COUNTER MOUNTPEDESTAL
9.5 CM (3.8 IN)
22.9 cm (9 in)MOUNTING
PLATE
Base & Displayw/No RAC
405263-005
44.5 cm (17.5 in)MOUNTING
PLATE
COUNTER MOUNTPEDESTAL
9.5 CM (3.8 IN),
416537-002*RAC ADAPTERPLATE(Ordered Separately)
Base & Displayw/1 RAC
405263-006
2025420-00163.5 cm (25 in)
Upgrade Plt(Ordered Separately)
416537-002RAC ADAPTERPLATES (x2)(Ordered Separately)
COUNTER MOUNTPEDESTAL
9.5 CM (3.8 IN)(From 405263-005)
Base & Displayw/2 RACs
See Notes Below
405263-00X Notes:1. Base & Display, NO RAC, 405263-005 Kit, includes: 22.9 cm (9 in)mounting plate, counter-mount pedestal, and hardware.See Note 4 for information about display mounting.2. Base & Display, w/1 RAC, 405263-006 Kit, includes: 44.5 cm (17.5 in)mounting plate, counter-mt pedestal, and hardware. NOTE: RAC Adapterplate, pn 416537-002, MUST be ordered SEPARATELY when used with405263-006 mount. See Note 4 for information about display mounting.3. Base & Display, w/2 RACs, 405263-007 Replacement: Stacked Base &Display w/Dual RACs mount, pn 405263-007, has been obsoleted andreplaced by the following SEPARATE p/n's: 405263-005 Counter Mount,2025420-001 63.5 cm (25 in) Upgrade Plate and qty two (2) 416537-002RAC Adapter Plates. See Note 4 for information about display mounting.4. IMPORTANT - Display mt ORDERED Separately: order pn 2028150-002.5. Use w/8000i requires aditional mtg consideration for the keypad & holster:u For 8000i med grade 15" fp, use 8000i keypad, holster & 8000i holster mt(I-KEYPAD-Cxx-x) -or-u For generic 15/18/19" fp use keypad & holster (I-KEYPAD-Bxx-x) +Generic holster mt (2017534-001).6. Maximum allowable supported weight: 31.8 kilograms (70.0 pounds).7. The distance between the center of the counter mount and the nearestvertical surface varies for each site. A distance of approx 50.8 cm (20.0 in)minimum is recommended for cable clearance and access.
For Stacking Base &Dspl, Must Order Dsplmt separately. Flt Pnlsrequire 2028150-002
For Stacking Base &Dspl, Must Order Dsplmt separately. Flt Pnlsrequire 2028150-002.See Note 5 for 8000i
keypad mounting info.
For Stacking Base &Dspl, Must Order Dsplmt separately. Flt Pnlsrequire 2028150-002.See Note 5 for 8000i
keypad mounting info.
Must Order 2002555-001for SLr8000(M) Cover Plate
Mount (For StackingBase & 15" Display)
Separately
416537-002*RAC ADAPTERPLATE(Ordered Separately)
MOUNTINGPLATE
48.3 cm(19 in)
Wall Chnl
SWINGARM
55.9 cm(22.0 in)
48.3 cm(19.0 in)
15.2 cm(6.0 in)
15.2 cm(6.0 in)
15.2 cm(6.0 in)
10.2 cm(4.0 in)
132.1 TO 152.4 cm(52.0 TO 60.0 in)
FROM FLOOR
CENTERLINE
CLEARANCE (MIN)35.6 cm(14.0 in)
CLEARANCE (MIN)35.6 cm(14.0 in)
12.7 mm(0.5 in)
0.35 RADIANS(20°)
TILT ADJUSTKNOB
2.5 cm(1.0 in)
44.45 cm(17.5 in)
7.6 cm(3.0 in)
SWIVEL
SWIVEL
90°
90°
Side-by-Side Swing Arm Wall-Mount w/ Wall Channel 405867-001
Notes1. Kit, pn 405867-001, includes mounting plate,support arm, 48.3-centimeter (19-inch) wallchannel, and hardware.2. Important - The following parts MUST beordered separately: RAC Adapter pn 416537-002& Cover Plate Mt pn 2002555-001 for Slr8000(M).RAC can be mounted on either the right or leftside of the monitor.3. Maximum allowable supported weight: 36.3 kilograms (80.0 pounds).
(TRAM-RAC 2)24 cm (9.5 in)
(TRAM-RAC 3/4)34.3 cm (13.5 in)
Tram-RAC Clamp-On Mount OptionsSingle RAC 2/2A 404757-001Single RAC 4/4A 404757-005Dual RAC Option 405154-009
u 404757-001/-005 Notes1. Mount, pn 404757-001, is for Tram-rac 2/2A(accommodates one Tram style module only).2. Mount, pn 404757-005, is for Tram-rac 4/4A(accommodates one Tram module plus twodescrete module or one double high module) orTram-rac 3 (accommodates one Tram moduleplus one descrete module).3. Mounts include Hanger w/C-Clamp Attachmentand RAC attaching screws.4. For dual RAC's, add Optional 405154-009. See 405154-009 Notes below.5. Maximum allowable supported weight: 31.8 kilograms (70.0 pounds).
u 405154-009 Notes1. For Dual RAC mounting, add Dual RAC Option,pn 405154-009. Kit includes add-on Hanger,Joining spacer, 22.9cm (9in) Extension w/DownPost Disc, Crossmember, Channel Slide andattaching hardware.2. The added parts, Crossmember, Extensionand Channel Slide, are used with/for additionalmounting options using VHM arms, ceiling mountsor 'M' series arms.3. Maximum allowable supported weight: 31.8 kilograms (70.0 pounds).
CLAMP ONRAC MOUNTBRACKETS
31.5 cm(12.4 in)
31.8cm/12.5inW/O POWER SUPPLY
37.1cm/14.6inW/ POWER SUPPLY
31.8cm/12.5inW/O POWER SUPPLY
37.1cm/14.6inW/ POWER SUPPLY
14.7 cm
(5.8 in)
26.7 cm(10.5 in)
34.3 cm(13.5 in)
61 cm(24 in)
14.7 cm
(5.8 in)
405154-009Dual RAC Option
(can be mounted Side-By-Sideor Over-Under)
404757-005RAC 4/4A
Joining Spacer(Included w/405154-009)
404757-001RAC 2/2A
405154-009Dual RAC Option(shown side-by-side)
404757-005Clamp-On Mount(Not included w/
405154-009)
405154-009Dual RAC Option
(shown over-under)
(TRAM-RAC 2)16.5 cm (6.5 in)
(TRAM-RAC 3/4)26.7 cm (10.5 in)
53.5 cm(21 in)
Single RAC Options(RAC2 or RAC4)
RAC Mounts for VHM or M Series Arms Single RAC4(A) 2004464-001 RAC2(A) 2004465-001 Cable Management Hooks See Notes Below
u 2004464-001 Notes:1. RAC4 Mount, pn 2004464-001, includes wraparound RAC mount, 22.9 cm (9 in) extensionbar, lower swivel fitting and all attaching hardware.*NOTE* - Because of VHM arm weight restrictions,only one (1) RAC may be mounted from VHM arm.Dual RACs can only be used on 'M' Series or olderPoly Mount series wall arms.2. Mount for use with both VHM or 'M' series arms.
u 2004465-001 Notes:1. RAC2 Mount, pn 2004465-001, includes wrap around RAC mount, 22.9 cm (9 in) extensionbar, lower swivel fitting and all attaching hardware.*NOTE* - When used w/Dash, use only w/LockingVHM Arm, pn 2014448-001.2. Mount for use with both VHM or 'M' series arms.
u Cable Mgmt Hook Notes:1.420807-001 Straight hook or 420808-001 90° hook.See dimensions at left. Hooks are plastic and areattached using double sided tape.
2004464-001RAC4A Mount for VHM Arm(for use w/Slr8000(M/i) & Slr9500
& Single Flat Panel Display)
2014448-001Locking
VHM Arm
2004465-001RAC2A Mountfor VHM Arm
(for use w/Dash onLOCKING VHM Arm)
51.4 cm(20.25 in)
39.4 cm(15.5 in)
2002746-002Non-Locking
VHM Arm
2004464-001for RAC4A
2004465-001for RAC2A
M SeriesArm
RAC Mount forM Series Arm
(RAC4A Mt Shown)
420807-001Straight Cable
Hanger
420808-00190° CableHanger
7.6 cm(3 in)
5.1 cm(2 in)
2.5 cm(1 in)
5.1 cm(2 in)
2.5 cm(1 in)
6.3 cm(2.5 in) 5.1 cm
(2 in)
416537-002Single RACAdapter Plt
2022717-001 =~30.5 cm (12 in)
or2022718-001 =
~30.5x30.5 cm (12x12in)
TRAM RAC Wall Mount Options 'M' Series 12" Blank Pivot-Block Arm 2022717-001 'M' Series 12" X 12" Articulated Blank Arm 2022718-001 'M' Series Pivot-Block Wall-Mt System See Notes
u Blank Arm Notes:1. Blank Pivot arms, pn 2022717-001 (30.5 cm/12 in) or12 X 12 Articulated Blank arm, p/n 2022718-001 DONOT include wall channel.If wall channel is required, order optional pn 411959-001.2. Can be used with either 'M' series RAC mounts orstandard clamp-on RAC mounts. These arms replacethe following obsolete arms: 404757-003, -004 & -007.3. For Dual RACs, add 405154-009 Dual RAC option.4. Maximum allowable supported weight: 31.8 kilograms (70 pounds).
u RAC Pivot Block Wall Mt System Notes:1. All parts are purchased SEPARATELY. Order thefollowing:M Series pivot arm w/tilt & swivel mounting plate, selectlength: 8in; p/n 2022719-001, 12in; p/n 407349-009 or16in; p/n 2022729 -002, Single RAC 416537-002 or DualRAC 2021024-001 adapter plate.If wall channel is required, order optional pn 411959-001.2. Maximum allowable supported weight:13.6 kilograms (30 pounds).
18.7 cm(7.4 in)
48.3 cm(19.0 in)
15.2 cm(6.0 in)
15.2 cm(6.0 in)
15.2 cm(6.0 in)
10.2 cm(4.0 in)
132.1 TO 152.4 cm(52.0 TO 60.0 in)
FROM FLOOR
CENTERLINE
CLEARANCE (MIN)35.6 cm(14.0 in)
CLEARANCE (MIN)35.6 cm(14.0 in)
12.7 mm(0.5 in)
2.5 cm(1.0 in)
14.7 cm (5.8 in)Single RAC
or~30.5 cm (12 in)
Dual RACs
OPTIONAL411959-001
48.3 cm (19 in)Wall Channel
20°
90°
90°
SWIVEL
SWIVEL
2022717-00130.5 cm (12 in)
'M' SeriesPivot-BlockBlank Arm
Pivot-Block ArmWall Mount System
(all parts orderedseparately)
SingleRAC
DualRACs
2021024-001Dual RACAdapter Plt
or
OPTIONAL411959-001
48.3 cm (19 in)Wall Channel
2022718-00130.5x30.5 cm (12x12 in)
'M' Series ArticulatedBlank Arm
Blank ArmWall Mount System
(all parts orderedseparately)
2022719-001 (8") =~26.7 cm (10.5 in)
or407349-009 (12") = ~36.8 cm (14.5 in)
or2022719-002 (16") =
~47 cm (18.5 in)
'M' SeriesPivot Arm:
8" = 2022719-00112" = 407349-009 16" = 2022719-002
(Single or DualRACs)
Counter Top/Pedestal Mount for TRAM RACMulti-Use Pedestal Mount 2007059-001
2007059-001 Notes1. This Multi-Use mount is for use with DASH X000, DASHPort, Single or Dual RACs (requires separate Adapter Plate,see Note 3) and Eagle 3000 (requires separate AdapterPlate, see Note 4).It can be used as a stand-alone pedestal mount, bolt oncounter mount or slide-in mount for use with anesthesiamachine top mounted channel.2. Mount, pn 2007059-001, includes triangular Pedestal base[~30.5cm (12in)], Tilt/Swivel head w/3.2cm (1.25in)pipe, 12.7cm (5in) Mounting plate and combination CounterMt/Chan Slide Plate Adapter.3. For use with RAC(s), order the following Adapter Plates:Single RAC - 416537-002 Adapter Plate, orDual RAC - 2021024-001 Adapter Plate.4. For use with Eagle 3000, order 413030-013 Eagle 3000Adapter Plate separately.5. This Multi-Use mount is to be used in place of thefollowing p/n's: 407349-012, 900069-044, 900069-050,900069-065, 900069-066 and 2002720-001.
~ 30.5 cm (12.0 in)Triangular Shaped Base
7.6 cm(3.0 in)
Counter Mt/ SlidePlate Adapter
(included with 2007059-001)
2007059-001Multi-Use Pedestal
2007059-001
- or -
Optional RACAdapter Plates
Optional416537-002 SingleRAC Adapter Plate
Optional2021024-001 DualRAC Adapter Plate
IV PoleSee Note 4
u2027282-001 Notes: 1. Kit, pn 2027282-001, includes "L" Mounting Bracket, multiuse Pole/Rail Clamp, Wall Channel Slide, Channel Stop and all mounting hardware. (Please note: The 2027282-001 mount combines and replaces mounts 900069-062 & 900069-069.) 2. Pole/Rail Clamps can accommodate the following: IV pole diameters of 19 mm (.75 in) to 39 mm (1.5 in) and equipment rail dimensions of 10 x 25 mm or 8 x 25 mm. 3. Maximum allowable supported weight:13.6 kilograms (30 pounds). 4. IV pole furnished by customer. Suitability of the IV pole, and the base or structural member to which it is secured, to support the equipment, must be determined by the customer.
13.65 cm(5.375 in)
20.8 cm(8.1875 in)
Additional RAC Mounts Multi-Use IV Pole/Rail/Wall Channel RAC Mount 2027282-001
IV PoleUse
RailUse
WallChannel
Use
Verticalfor Rail Use
Horizontalfor IV Pole
Use
-or-
PRC(Post/Rail Clamp)
Wall ChnlUse
Use forIV Pole
Attachment
Use for RailAttachment
2027282-001MultiUse RAC Mount
for IV Pole, Rail or Wall Mtg
Bracket
Cable Clampsw/screws
2005655-001Cable Relief Kit
Tram RAC Cable Relief Kit 2005655-001 Cable Mgmt Hooks See Notes below
u RAC Cable Relief Kit Notes:1. Kit, p/n 2005655-001, consists of a bracketw/attaching screws, cable clamps w/screwsand instructions.2. Kit can be used on RAC 2, 2A, 4 & 4A.
u Cable Mgmt Hook Notes:1.420807-001 Straight hook or 420808-00190° hook. See dimensions at below.Hooks are plastic and are attached usingdouble sided tape.
420807-001Straight Cable
Hanger
420808-00190° CableHanger
7.6 cm(3 in)
5.1 cm(2 in)
2.5 cm(1 in)
5.1 cm(2 in)
2.5 cm(1 in)
6.3 cm(2.5 in) 5.1 cm
(2 in)
421358-002Clamp-On RACMount Adapter
421358-001Slide Plate Mt
421358-005Clamp-On Mt
421837-002Weighted Pedestal
(Not AvailableFrom GCX)
PRN50/RMM Mounting Options 421358-00X 421837-002
421358-00X Notes:1. Due to continuing product upgrade/refinement process, thefollowing mounts have been obsoleted. Replacements, whenavailable, are indicated below:Obsolete 421358-003 & replace w/421358-009Obsolete 421358-004 & replace w/421358-009Obsolete 421358-006 w/NO ReplacementObsolete 421358-007 w/NO ReplacementObsolete 421358-008 & replace w/421358-009Obsolete 421358-010 & replace w/421358-009 + 407349-026Obsolete 421358-011 & replace w/421358-009Obsolete 421358-012 & replace w/421358-001 + 2002720-001
Anesthesia Mach Top Mt421358-001 + 2002720-001(Also requires anesthesiamachine top channel mt)
(2002720-001)
-or-Forward facing
-or-Side facing
WallChnlSlide
5.1 cm(2in) Pole
Clamp
421358-009PRN50/RAC2A
Wall Chnl/2" Pole Mt
10.2 cm(4 in)
21 cm(8.3 in)
2028791-001ADAPTER PLT
w/Wall Slide(Includes Chnl Stop
& Screws)
Optional WALLCHANNEL(NOT included
w/2028791-001)See Notes Below
UNITY ID/OCTACOMM/
OCTANET
UNITY ID/OCTACOMM/
OCTANET
13.7 cm(5.4 in)
21 cm(8.3 in)
IV POLE
IV POLEMOUNTBRACKET
418616-001IV Pole Mt
Unity ID/OCTACOMM/OCTANET Mounts IV Pole Mount 418616-001 Wall Mount Adapter Plate Kit 2028791-001
u 418616-001 Notes: 1. IV Pole Mount kit, pn 418616-001, includes IV Pole Mounting Bracket and all mounting hardware.u 2028791-001 Notes: 1. Adapter Plate kit, pn 2028791-001, includes adapter plate, molded wall slide, channel stop and all mounting hardware. 2. Adapter plate kit DOES NOT include optional wall channel. If wall channel required, order: for 7in (17.8cm) wall chnl, p/n 2030517-001 -or- for 19in (48.3cm) wall chnl, p/n 411959-001. 3. The 2028791-001 mt & optional wall channel replaces both 418616-002 & 418616-003. 4. *CAUTION* - Always mount the Unity ID/ Octacomm/Octanet in a vertical position.
418616-001
2028791-001
OptionalWALL
CHANNEL(NOT included
w/2028791-001)
FlatPanel/KeyBoard/Mouse/CPU Wall Mounting ComponentsPivot Arm Starter Kit 2021272-001Variable Height (VHM) Arm Starter Kit 2021271-001CPU Mount (Select Width. See note below) 2021474-00X(Note: Wall Channel Ordered Separately for all kits)
2021272-00130.5 cm (12 in) Pivot
Arm Wall Mt Starter Kit2021271-001
VHM ArmWall Mt Starter Kit
2021272-001 Pivot Arm Starter Kit Notes:1. All mounting components, except wall channeland CPU mount, are contained in this kit.2. The 2021272-001 Pivot Arm starter kit includes:30.5 cm (12 in) Pivot Arm with Ergo Bracket mountfor Flat Panel & Keyboard and 52.7 cm (20.75 in)Keyboard Tray w/Slide Out (right or left side) MouseTrays.3. Wall channel ordered separately and availablein four (4) different lengths. Please consider if CPUwill use same wall channel or separate one:411959-001 = 48.3cm (19in), 416537-006 = 63.5cm(25in), 416537-012 = 78.7cm (31in) or 416537-025 =109.2cm (43in).4. Maximum allowable supported weight: Pivot Arm = 13.6 kilograms (30 pounds)
2021271-001 VHM Arm Starter Kit Notes:1. All mounting components, except wall channeland CPU mount, are contained in this kit.2. The 2021271-001 Variable Height (VHM) starterkit includes:VHM Arm with Ergo Bracket mount for Flat Panel& Keyboard and 52.7 cm (20.75 in) Keyboard Trayw/Slide Out (right or left side) Mouse Trays.3. Wall channel ordered separately and availablein four (4) different lengths. Please consider if CPUwill use same wall channel or separate one:411959-001 = 48.3cm (19in), 416537-006 = 63.5cm(25in), 416537-012 = 78.7cm (31in) or 416537-025 =109.2cm (43in).4. Maximum allowable supported weight: VHM Arm = 9.1 kilograms (20 pounds)
VHM Armw/Flat Panel Mt &
Keyboard Tray
15/18/20"Flat Panel
Display
Wall Chnl(See Notes)15/18/20" Flat
Panel Display
12" 'M' Series PivotArm w/Flat Panel Mt
& Keyboard Tray
Wall Chnl(See Notes)
CPU Mount
CPU Mount Notes:1. CPU mounts are available in three (3) adjustable widths:2021474-001 for CPU boxes 7.6 to 11.4 cm (3 to 4.5 in) -or-2021474-002 for CPU boxes 11.4 to 17.8 cm (4.5 to 7 in) -or-2021474-003 for CPU boxes 17.8 to 24.1 cm (7 to 9.5 in).*Note* Mount may also be used to mount similiar sized UPS.�2. Wall channel, if required is ordered separately. Or, mayuse the same channel used for the starter wall mount kits.See wall mount starter kits below for available lengths.3. Maximum allowable supported weight: 2021474-001 = 11.3 kgs (25 lbs), 2021474-002 & 2021474-003 = 18.1 kgs (40 lbs)
Wall Chnl(See Notes)
12" 'M' Series PivotArm w/Flat Panel Mt
& Keyboard Tray:2021272-001
'M' Series Pivot Arm:8" = 2022719-001
12" = 407349-009 16" = 2022719-002
Base Mt Options
12" x 12"Articulated Arm:
407349-022
Display Only, No Keyboard
Display w/Keyboard & Mouse
Flush Mt Arm:2019472-001
VHM Arm:2002746-002
Optional Wall Chnl:19" = 411959-00125" = 416537-00631" = 416537-01243" = 416537-025
VHM ArmArm w/Flat Panel Mt
& Keyboard Tray:2021271-001
Optional Wall Chnl:19" = 411959-00125" = 416537-00631" = 416537-01243" = 416537-025
Flush Base Mt:2024390-001
CPU BaseWall Mount
CIC (Bedrock) Wall Mounting Components (for Nightshade, or other computer products, see previous page)
Please note, components purchasedseparately, NOT in kit form.
Flat Panel Display Mt Options(With or W/o Keyboard/Mouse)
Optional Wall Chnl: 7" = 2030517-00119" = 411959-00125" = 416537-00631" = 416537-01243" = 416537-025
-or-
-or-
-or-
-or-
Flat Panel DispAdapter Plates
75mm VESA Adapter Plate(for 15" Flt Pnl Dspl)
GE P/N = 2004031-001GCX P/N = FLP-0001-17
100mm VESA Adapter Plate(for 18"/20" Flt Pnl Dspl)GE P/N = 2017532-001
GCX P/N = FLP-0002-17
No Mount
Floor Mount:2031722-001
CPU BaseFloor Mount
RAC2/2A/4/4A Adapter PlateGE P/N = 416537-002GCX P/N = ME-0016-16
Wall Channels:7 in (17.8 cm)
GE P/N = 2030517-001GCX P/N = WC-0002-01
19 in (48.3 cm)GE P/N = 411959-001
GCX P/N = WC-0002-0525 in (63.5 cm)
GE P/N = 416537-006GCX P/N = WC-0002-07
31 in (78.7 cm)GE P/N = 416537-012
GCX P/N = WC-0002-0943 in (109.2 cm)
GE P/N = 416537-025GCX P/N = WC-0002-12
Swivel Only Wall Mount,w/15" Arm & 9" Mounting Plate
GE P/N = 416537-005GCX P/N = ME-0031-03
Side-By-Side Wall Mount,w/15" Arm & 17.5" Mounting Plate GE P/N = 404838-012 w/o WC = 404838-005 Upgrade
Cover Plate MountGE P/N = 2002555-001
Standard Wall Mount,w/15" Arm & 9" Mounting PlateGE P/N = 404838-008 w/o WC
= 407349-010 Upgrade
Adjustable Flt Pnl StackMount w/Tlt & Swvl
GE P/N = 2028150-002GCX P/N = ME-0031-13
Major Parts for Mounting Solar 8000(M/i),Including Still Active Adapter Plates (Note: Other Manufacturers Adapters May Be Available Directly From GCX)
Wall Mount - Mtg PltUpgrade Kit w/Diag Brace
(For Square VB Series Arms Only) 407349-010 = DASH or Solar 8000(M/i)
404838-005 = SBS Solar 8000(M/i)/RAC
407349-0107.6 in (19.3 cm)
404838-005 17.5 in (44.5 cm)
Dual RAC Adapter PlateGE P/N = 2021024-001GCX P/N = ME-0017-17
CRT Adapter Plates:19/20/21" Displays
(15" & 17" CRT Adapter Plates:Call for Availability)
Flat Panel Display (Various Sizes) Adapter Plates
75mm VESA Adapter Plate(for 15" Flt Pnl Dspl)
GE P/N = 2004031-001GCX P/N = FLP-0001-17
21" Sony CPD-G520PMonitor Adapter Plate
GE P/N = 2010191-001GCX P/N = SY-0116-16
100mm VESA Adapter Plate(for 18"/20" Flt Pnl Dspl)GE P/N = 2017532-001
GCX P/N = FLP-0002-17
'M' Series Wall Armw/Pivot Arm & 5" Mounting Plate
8": GE P/N = 2022719-001GCX P/N = WMM-0002-0112": GE P/N = 407349-009GCX P/N = WMM-0002-0216": GE P/N = 2022719-002GCX P/N = WMM-0002-03
Vertical
Horiz
420807-001Straight Cable
Hanger 420808-00190° CableHanger
Utility basket, Wall/2in RlStndPost/8-10mmX25-40mm Rail
GE P/N = 2032212-001GCX P/N = GEM-0001-16
Wl ChMt
RailMt
Rl StndMt
Eagle 4000 Universal Mounting Adapter 2018454-001(used to adapt Eagle 4000 for most mounting applications)
Wall MountStyle Applications
Roll StandStyle Application
900276-011Roll Stand
(Required &Ordered
Separately)
-or-
Subplate
Mount PlatePositionedVertically
Mount PlatePositioned
Horizontally
Mtg AdapterPlate Only
Configuration
-or-
MountingAdapter
17.9 cm(6.9 in)Post
2018454-001 Notes:1. Universal Mounting Adapter, pn 2018454-001, includesSubplate, 17.5 cm (6.9 in) Polyquip Post, Mounting Adapterand Adapter Plate w/Clamp.u Wall mounted applications (wall arm ordered separately):for horizontally orientated mounting applications use thecomplete Subplate w/Post & Mounting Adapter and AdapterPlate w/Clamp configuration. -or-for vertically orientated mounting applications, separate theMounting Adapter from the Subplate w/Post and attach theMounting Adapter directly to the back of the Eagle 4000.The Mounting Adapter Plate is the only part used in thisconfiguration.u Roll Stand mounted applications (roll stnd ordered separately):REQUIRES 900276-011 roll stand. Use the complete Subplatew/Post & Mounting Adapter and Adapter Plate w/Clamp configuration w/roll stand.
2018454-001Universal Mounting
Adapter parts
ClampAdapter
Plate
PoleClamp
Adptr Pltw/Clmp and
Subplatew/UP Post &
Mtg AdptrConfiguration
Adptr Pltw/Clmp and
Subplatew/UP Post &
Mtg AdptrConfiguration
Doublesided tape
Display MountConfiguration
Hangar MountConfiguration
Wall MountConfiguration
"L"bracket
Remote Control Mount Kit Options Solar 8000 405110-005Solar 8000M/i 2013770-001
Solar 8000 Notes:1. Kit, pn 405110-005, includes remote control holder assembly, hangar adapter w/screws, monitor "L" bracket w/screws & double sided tape, and round spacers, wall anchor inserts & screws.2. The mounting kit includes parts to allow the Solar 8000 remote control holder to be wall mounted, display mounted or DDW hangar mounted.3. See 2013770-001 for Solar 8000M/i use.
Solar 8000M/i Notes:1. Kit, pn 2013770-001, includes remote control holder assembly and mounting hardware kit.2. The mounting hardware kit includes parts to allow the Solar 8000M/i remote control holder to be mounted directly to the wall, onto a display or onto a GCX wrap-around RAC mount.3. See 405110-005 for Solar 8000 use.
Remote ContHolder
Hardware Kit
405110-005Solar 8000 Remote(See 2013770-001 for
Solar 8000M/i)
2013770-001Solar 8000M/i Remote
(See 405110-005 forSolar 8000)
REMOTECONTROL
m a r q u e t t e
REMOTECONTROL
m a r q u e t t eREMOTECONTROL
m a r q u e t t e
Wall MountConfiguration
RAC Hangar MtConfiguration
GE HealthcareClinical Systems
g