Client Project Wall condition Project data Building dimensions Insulation Wind loads Facade panel* Fixing method* Company* _____________________________________ Address* _____________________________________ Client number* _____________________________________ Contact person* _____________________________________ Phone _____________________________________ E-mail _____________________________________ Fax _____________________________________ Project name* _____________________________________ Address* _____________________________________ Editor name _____________________________________ Date of request _____________________________________ Offer deadline* _____________________________________ Estimated project start _____________________________________ S2S Slab thickness [mm]* ____________________ Distance between slabs [m]* ____________________ Other information _____________________________________ Wind membrane* Thermal conductivity insulation λ [W/mK]** ___________________ Target U-value** ___________________ According to customer specification Normal area [B] uplift [kN/m 2 ] ____________________ Normal area [B] pressure [kN/m 2 ] ____________________ Edge area [A] uplift [kN/m 2 ] ____________________ Edge area [A] pressure [kN/m 2 ] ____________________ Producer ________________________________________ Dimension [mm] ______ × ______ Thickness [mm]* _______________ Weight [kg/m 2 ] _________ Orientation Landscape Portrait Submit form Concrete Quality [N/mm²] _____ Cracked concrete Quality [N/mm²] _____ Aerated concrete AAC 6 4 2 Steel Type _____________ Thickn. [mm] _____ SFS Type _____________ Thickn. [mm] _____ Timber Type __________ CP-board Thickn. [mm] _____ Solid brick Lime-sand. solid Perf. brick Lime-sand. w. hole Others ___________________________________________________ Type New building Renovation Project status Tendering stage Contract signed Facade area [m 2 ]* ____________________ Building height [m]* ____________________ Building width [m] ____________________ Building length [m] ____________________ Insulation thickness [mm]* ____________________ Producer / type ____________________ Insulation fastener ____________________ Terrain category* Rural area Inner city area Outside inner city area Basic wind velocity [m/s] ____________________ Altitude [m] ____________________ Dist. upwind to shoreline [m] ____________________ Ceramic Metal Fibrecement Terracotta HPL Plaster Timber Other ______________________________ Wall thickness [mm]* ____________________ Pull-out value [kN] _________________ F RK Wall-to-panel distance [mm]* ____________________ Non-load-bearing layer thickness [mm]* ____________________ Structural fire protection requirements ____________________ With protocol Fixing with X-CR 52 P8 S15 Wall thermal conductivity λ [W/mK]** ____________________ Contact: +43 2627 424 00 34, www.hilti.co.uk * The cells which are marked with a * have to be filled out. ** Only if U-value calculation is needed. Visible Invisible With rivets / screws With adhesives With stud anchors With undercut anchors With clamps With clamps Substructure orientation Vertical Horizontal 2-layer PROJECT DATA SHEET FOR LIGHT VENTILATED FACADE