158 Product overview • 2017 We reserve the right to change designs and technical specifications of our products. Clevis Pipe Hangers, Supports and Accessories A comprehensive range of pipe hangers, supports and accessories, many of which are UL Listed and have FM approval. Most products in this range comply with MSS SP-58 and SP-69 and A-A-1192 A. Please enquire about items that are not specifically shown in this section. 9.
18
Embed
Clevis Pipe Hangers, Supports and Accessories · Clevis Pipe Hangers, Supports and ... this range compl with MSS SP-58 and SP-69 and A-A-1192 A ... A comprehensive range o pipe hangers
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
158
Product overview • 2017 We reserve the right to change designs and technical specifications of our products.
Clevis Pipe Hangers, Supports and AccessoriesA comprehensive range of pipe hangers, supports and accessories, many of which are UL Listed and have FM approval. Most products in this range comply with MSS SP-58 and SP-69 and A-A-1192 A. Please enquire about items that are not specifi cally shown in this section.
9.
159
Clevis Hangers
Product overview • 2017 We reserve the right to change designs and technical specifications of our products.
9
Clevis Pipe Hangers, Supports and AccessoriesA comprehensive range of pipe hangers, supports and accessories, many of which are UL Listed and have FM approval. Most products in this range comply with MSS SP-58 and SP-69 and A-A-1192 A. Please enquire about items that are not specifi cally shown in this section.
9.
160
Product overview • 2017 We reserve the right to change designs and technical specifications of our products.
Zinc Coating• Electroplated Zinc (ASTM B633) This type of coating is recommended for indoor use in relatively dry areas. This process deposits a coating of zinc on the steel or iron by electrolysis from a bath of zinc salts. This coating is pure zinc and adheres to the steel or iron with a molecular bond. A maximum of 12 μm of zinc can be applied using this method.
• Pre-Galvanized Zinc (ASTM A653)This type of coating is suitable for extended exposure in dry or mildly corrosive atmospheres, but not generally recommended for outdoor use, or in industrial environments. This coating is also referred to as “mill galvanized” or “hot dip mill galvanized”. This process continuously rolls steel coils or sheets through molten zinc. The steel is then cut or slit to size. Coating thickness of .90 ounces per square foot of steel surface (referred to as G90) is used on Flamco’s Figures 310G and 310NFPA. Cut edges are not zinc coated, however, zinc near the uncoated steel becomes a sacrificial anode, which protects the bare areas after a short period of time.
• Hot Dip Galvanized (ASTM 123)This type of coating provides extended corrosion protection for steel and iron products exposed to extreme humidity commonly evident in outdoor exposure or in uncontrolled atmospheric conditions. This coating provides superior corrosion resistance to that of electroplating. The process calls for the steel or iron product to be completely immersed into a bath of molten zinc, which creates a metallurgical bond. The minimum coating thickness is 1.5 ounces per square foot per side (3 ounces per square foot of steel or iron). Caution should be taken when specifying Hot Dip Galvanizing on certain products. Products with threaded components should either have the threads protected from the galvanizing process or chase the threads subsequent to hot dipping. Products with critical size tolerances should account for the thickness of the coating.
Alternative Finishes
Primer Flamco offers Red Primer and Yellow Primer. Both offer a degree of protection from the elements. These coatings are also used in applications where painting of the metal is desired. EPA is restricting the use of certain primers. Consult Flamco for specific primer chemical components, as well as corrosive capabilities of specific primers.
Plastic CoatingVinyl coating of the metal prevents galvanic reaction between dissimilar metals, provides corrosion resistance, reduces noise, and can be used where glass or plastic pipe contact with metal is not desired.
Epoxy CoatingFlamco offers various epoxy finish es in both commercial and military grades. These finishes offer a high degree of corrosion resistance. Flamco provides COPPER-GARD finish for copper tubing installations. The finish provides superior corrosion protection and insulates against dissimilar metal contact, thus preventing electrolysis. The process applies a baked-on epoxy paint to steel stampings and iron castings. In the three step process, the parts are zinc plated to .0002” thick, an epoxy copper colored powder is then applied by an electrostatic method, and finally, the coated parts are baked at 180 ° for 20 minutes.
Copper PlatingThis coating is designed for copper tubing installations. The coating is intended to identify the product size only. This finish is not intended for corrosion resistance.
Chrome PlatingThis coating is intended to support chrome plated pipe and provides corrosion resistance for commercial installations such as hospitals, schools and prisons.
Flamco can offer alternative coatings for all products detailed in this chapter such as plastic, red and yellow oxide primer, epoxy, hot dip
galvanized, electro zinc, copper, COPPER-GARD, chrome and colour coordinated finishes. Specialized finishes may be available upon request.
161
Clevis Hangers
Product overview • 2017 We reserve the right to change designs and technical specifications of our products.
9CLEVIS HANGERS
CH - G Clevis Hangers
Type 11Standard, adjustable clevis hangers.• Material: Carbon steel *. • Finish: Electro-galvanized *.• Service: Designed for the suspension of non-insulated, stationary pipe lines.• Approvals: U.L. - U.L.C. listed (sizes 21/2" - 8")
FM approved (3/4" - 8").• Complies with: Federal Specification WW-H-171-E (Type# 1), A-A-1192 A (Type# 1)
Manufacturers‘ Standardization Society MSS SP-58 and SP-69 (Type# 1).• Notes: Upper locknut must be tightened securely to assure proper hanger performance. Stainless steel hangers are
recommended for applications where protection from corrosive environments is needed.
* Material 304 and 316 stainless steel and finishes such as plain, painted or hot dip galvanized are available upon request.** “E” dimension includes exposed rod threads beyond bottom of the hex nut. Exposed rod thread dimension is equal to the diameter of the rod used.
162
Product overview • 2017 We reserve the right to change designs and technical specifications of our products.
CH - E Clevis Hangers
Type 11xClevis hangers with extended bottom. • Material: Carbon steel. • Finish: Electro-galvanized *.• Service: Designed for the suspension of non-insulated, stationary pipe lines. The bottom section of the hanger is
elongated to allow for easier installation of insulation.• Complies with: Federal Specifications WW-H-171-E (Type# 1), A-A-1192 A (Type# 1)
Manufacturers‘ Standardization Society MSS SP-58 and SP-69 (Type# 1).• Notes: Upper locknut must be tightened securely to assure proper hanger performance.
* Plain finish available upon request.** “E” dimension includes exposed rod threads beyond bottom of the hex nut. Exposed rod thread dimension is equal to the diameter of the rod used.
163
Clevis Hangers
Product overview • 2017 We reserve the right to change designs and technical specifications of our products.
9CH - GL Clevis Hangers
Type 110Adjustable clevis hangers, lightweight.• Material: Carbon steel. • Finish: Electro-galvanized *.• Service: Designed for the suspension of light stationary pipe or conduit.• Complies with: Federal Specification WW-H-171-E (Type# 1), A-A-1192 A (Type# 1).
Manufacturers‘ Standardization Society MSS SP-58 and SP-69 (Type# 1). Galvanized and coated only.
• Notes: Conduit comes in various outside diameters. Verify outside diameter of conduit is equal to outside diameter of schedule 40 steel pipe.
* Plain or painted finish available upon request.** “E” dimension includes exposed rod threads beyond bottom of the hex nut. Exposed rod thread dimension is equal to the diameter of the rod used.
164
Product overview • 2017 We reserve the right to change designs and technical specifications of our products.
PIPE COVERS
CPS Pipe Covers
Type 167/168Pipe covering protection shield.• Material: Pre-galvanized carbon steel *. • Finish: Pre-galvanized.• Service: Designed for outside of foam or fiberglass insulation on stationary pipe lines (not designed for pipe rollers) to
prevent crushing of insulation without breaking the vapor barrier.• Complies with: Federal Specifications WW-H-171-E (Type# 41), A-A-1192 A (Type# 40)
Manufacturers‘ Standardization Society MSS SP-58 and SP-69 (Type# 40).
Product overview • 2017 We reserve the right to change designs and technical specifications of our products.
ROLLER HANGERS
RHA Roller Hanger
Type 272Adjustable roller hanger.• Material: Carbon steel yoke and crossbolt with cast iron roller• Finish: Electro-galvanized.*• Service: Designed for the suspension of pipe where longidtudinal movement of pipe may occur due to the expansion
and contraction, and where vertical adjustment may be necessary.• Complies with: Federal Specification WW-H-171-E (Type# 44), A-A-1192 A (Type# 43)
Manufactures' Standardization Society MSS SP-58 and SP-59 (Type# 43).
* Plain or painted finish available upon request.** “E” dimension includes exposed rod threads beyond bottom of the hex nut. Exposed rod thread dimension is equal to the diameter of the rod used.
167
Clevis Hangers
Product overview • 2017 We reserve the right to change designs and technical specifications of our products.
9RRH Roller Hanger
Type 277Adjustable two rod roller hanger.• Material: Carbon steel axle with cast iron roller and sockets ends.• Finish: Electro-galvanized.*• Service: Designed for the suspension of pipe where longidtudinal movement of pipe may occur due to the expansion,
and contraction, and where vertical adjustment is necessary.• Complies with: Federal Specification WW-H-171-E (Type# 44), A-A-1192 A (Type# 41)
Manufactures' Standardization Society MSS SP-58 and SP-59 (Type# 41).
* Painted or hot dip galvanized are available upon request.
168
Product overview • 2017 We reserve the right to change designs and technical specifications of our products.
ROLLER CHAIR
RC Roller Chair
Type 275Roller chair.• Material: Carbon steel chair and axle with cast iron roller• Finish: Electro-galvanized.*• Service: Designed for the support of pipe where longidtudinal movement of pipe may occur due to the
expansion and contraction, and where vertical adjustment is not necessary. May be bolted or welded to supporting member.
* Material 304 and 316 stainless steel an dfinish such as plain, painted or hot dip galvanized are available upon request.
169
Clevis Hangers
Product overview • 2017 We reserve the right to change designs and technical specifications of our products.
9PIPE ROLL STANDS
RS Pipe Rol Stand
Type 279Pipe rol stand, carbon steel.• Material: Carbon steel chair and axle with cast iron roller.*• Finish: Electro-galvanized.*• Service: Designed for support of pipe where longidtudinal movement of pipe may occur due to the expansion and
contraction, and where vertical adjustment is not necessary.• Complies with: Federal Specification WW-H-171-E (Type# 45), A-A-1192 A (Type# 41)
Manufactures' Standardization Society MSS SP-58 and SP-69 (Type# 44).• Notes: Stainless roller chairs are recommended for applications where protection from corrosive environments is
* Material 304 and 316 stainless steel and finish such as plain, painted or hot dip galvanized are available upon request.** Centre of axle to bottom of plate.*** Center of pipe to bottom of base plate.**** Two holes.***** Four holes.
170
Product overview • 2017 We reserve the right to change designs and technical specifications of our products.
RSA Pipe Rol Stand
Type 280Adjustable pipe rol stand, carbon steel, galvanized.• Material: Carbon steel chair and axle with cast iron roller.*• Finish: Galvanized.*• Service: Designed for support of pipe where longidtudinal movement of pipe may occur due to the expansion and
contraction, and where vertical adjustment is necessary.• Complies with: Federal Specification WW-H-171-E (Type# 47), A-A-1192 A (Type# 46)
Manufactures' Standardization Society MSS SP-58 and SP-69 (Type# 46).• Notes: Stainless steel roller chairs are recommended for applications where protection from corrosive environments
* Material 304 and 316 stainless steel and finish such as plain, painted or hot dip galvanized are available upon request.** Centre of pipe to bottom of base plate.*** Center to center of mounting holes in bottom plate.**** Mounting holes in bottom plate.***** Axle diameter.
171
Clevis Hangers
Product overview • 2017 We reserve the right to change designs and technical specifications of our products.
9PIPE ROLLER SUPPORTS
PRS Pipe Roller Support
Type 9100Pipe roller support, galvanized.• Material: Carbon steel chair base plate and axle with cast iron roller.*• Finish: Galvanized.*• Service: Designed to be mounted on slotted rail for the support of pipe where longidtudinal movement of pipe may
occur due to the expansion and contraction.• Complies with: Federal Specification WW-H-171-E (Type# 47), A-A-1192 A (Type# 46)
Manufactures' Standardization Society MSS SP-58 and SP-69 (Type# 46).• Notes: Stainless steel adjustable roller chair support are recommended for applications where protection from
* Material 304 and 316 stainless steel and finish such as plain, painted or hot dip galvanized are available upon request.
172
Product overview • 2017 We reserve the right to change designs and technical specifications of our products.
PROTECTION SADDLES
CS Protection Saddles
Type 1900 - 1905Pipe covering protection saddles.• Material: Carbon steel• Finish: Plain*• Service: Designed for use on insulated high temperature pipe lines to protect insulation from damage and minimize
heat loss.• Complies with: Federal Specification WW-H-171-E (Type# 40A and 40B), A-A-1192 A (Type# 39A and 39B)
Manufactures' Standardization Society MSS SP-58 and SP-69 (Type# 39A and 39B).• Notes: All saddles are 12 inch long when side edges beveled in. Stainless steel and alloy saddles are available and
* Electro-galvaniezed finish available upon request.
174
Product overview • 2017 We reserve the right to change designs and technical specifications of our products.
STANDARD RISER CLAMPS
SRC Riser Clamps
Type 50Riser clamps, electro-gavanized• Material: Carbon steel.*• Finish: Electro-galvanized.*• Service: Designed for supporting and stabilizing vertical pipe runs.• Complies with:U.L. - U.L.C. listed (sizes 2" - 8").
Federal Specification WW-H-171-E (Type# 8), A-A-1192 A (Type# 8) Manufactures' Standardization Society MSS SP-58 and SP-69 (Type# 8).
• Notes: Plastic coated riser clamps are completely plastic coated with zinc plated hardware. The plastic coating prevents pipe from coming in contact with the clamp and is designed to reduce noise, vibration and prevent electrolysis between pipe and clamp. Stainless steel riser clamps are recommended for applications where protection from corrosive environments is needed.