MU54 r a MU54 ROLAMENTOS BEARINGS BEARINGS CLASSIFICATION A maioria dos rolamentos consistem em anéis com pista (canal) (anel interno e externo), os elementos rolantes (esferas ou rolos) e o separador ou gaiola. A gaiola separa os corpos rolantes, prendendo-os em seu lugar dentro das pistas (interna e externa) e lhes permite girar livremente. Geralmente, o anel interior se encaixa no eixo e o anel externo da caixa. Os corpos rolantes são de dois tipos: as esferas e e rolos. Os rolos podem ser de 4 tipos: cilíndrico, agulha, cônicos e esférico. O contato entre a esfera e a pista é um ponto enquanto entre o rolo e a pista é uma linha. Os tipos de gaiolas diferem de acordo com a forma como eles são fabricados incluindo gaiolas prensadas, usinadas e modadas. Most bearings consist of rings with raceway (channel) (inner and outer ring), the rolling elements (balls or rollers) and the separator or cage. The cage separates the rolling elements, holding them in place inside the tracks (internal and external) and allows them to rotate freely. Generally, the inner ring is fitted on the shaft and the outer ring in the housing. The rolling elements are of two types: balls and and rolls. The rollers can be 4 types: cylindrical, needle, tapered and spherical. The contact between the ball and the raceway is a point while between the roller and the raceway is a line. The types of cages differ according to the way they are manufactured including pressed cages, machined and modadas. CLASSIFICAÇÃO DOS ROLAMENTOS tE tE tE tE
17
Embed
CLASSIFICAÇÃO DOS ROLAMENTOS BEARINGS …€¦ · Catalogo de peças automóveis Ford 1949 - 1954 Ford Cars Catalog Parts 1949 - 1954 Eixo dianteiro de automóvel Car front shaft
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
MU54
r
a MU54
ROLAMENTOSBEARINGS
BEARINGS CLASSIFICATION
A maioria dos rolamentos consistem em anéis com pista (canal) (anel interno e externo), os elementos rolantes (esferas ou rolos) e o
separador ou gaiola. A gaiola separa os corpos rolantes, prendendo-os em seu lugar dentro das pistas (interna e externa) e lhes permite
girar livremente.
Geralmente, o anel interior se encaixa no eixo e o anel externo da caixa.
Os corpos rolantes são de dois tipos: as esferas e e rolos.
Os rolos podem ser de 4 tipos: cilíndrico, agulha, cônicos e esférico.
O contato entre a esfera e a pista é um ponto enquanto entre o rolo e a pista é uma linha.
Os tipos de gaiolas diferem de acordo com a forma como eles são fabricados incluindo
gaiolas prensadas, usinadas e modadas.
Most bearings consist of rings with raceway (channel) (inner and outer ring), the rolling
elements (balls or rollers) and the separator or cage. The cage separates the rolling
elements, holding them in place inside the tracks (internal and external) and allows
them to rotate freely.
Generally, the inner ring is fitted on the shaft and the outer ring in the housing.
The rolling elements are of two types: balls and and rolls.
The rollers can be 4 types: cylindrical, needle, tapered and spherical.
The contact between the ball and the raceway is a point while between the roller and the raceway is a line.
The types of cages differ according to the way they are manufactured including pressed cages, machined and modadas.
CLASSIFICAÇÃO DOS ROLAMENTOS
tE���tE���tE���tE���
MU54
ROLAMENTOS RADIAIS
RADIAL BEARINGS
Os rolamentos fi xos de uma carreira de esferas são mais representativos atendendo a um extenso campo de
aplicações. O canal da pista em ambos os aneis, interno e externo, apresenta um perfi lateral em arco, com
raio ligeiramente maior que o raio das esferas.
Além da carga radial, permite o apoio da carga axial em ambos os sentidos.
Como o torque de atrito é pequeno torna-se preferido para as aplicações que requeiram baixo ruído e
vibração bem como alta rotação.Diversos tipos construtivos estão disponíveis, como mostrado nas figuras
abaixo. De um modo geral são mais encontrados com gaiola de aço prensada.
ROLAMENTO FIXO DE UMA CARREIRA DE ESFERAS ( DEEP GROOVE BALL BEARING)
Deep groove ball bearings are most representative meeting a wide range of applications. The raceway in both
rings, inner and outer side, has a profiling arched slightly larger radius than the radius of the spheres.
In addition to the radial load, allows the support of the axial load in both directions.
As the friction torque is small becomes preferred for applications requiring low noise and
vibration and high speed. Several construction types are available, as shown in the figures below. In general
they are more found with pressed steel cage.
MU54
Os rolamentos deste tipo permitem o apoio da carga radial e, de carga axial em um único sentido. A esfera e os anéis interno e externo
formam ângulos de contato de 15°, 25°, 30° ou 40°. Quanto maior o ângulo de contato maior será a capacidade de carga axial. Por outro
lado, quanto menor o ângulo de contato melhor será a sua utilização em altas rotações.
Geralmente, as gaiolas utilizadas são as prensadas de aço, mas para os rolamentos de alta precisão com ângulo de
contato menor que 30°, são utilizadas principalmente, as gaiolas de poliamida. Também são fornecidos com gaiolas de latão.
Os rolamentos de contato angular são muito utilizados em montagem combinada ( montados aos pares). Existem 3 tipos de montagem aos
pares: face a face (face to face), costas a costas (back to back) ou em série (tandem).
Rolamentos de contato angular montados aos pares na caixa de mancal de uma bomba
centrífuga, são o seu mancal de escora. Em caso de dilatação do eixo, o rolamento fixo
pode se deslocar na caixa.
Angular contact ball bearings mounted in pairs in the bearing housing of a centrifugal
pump, are its thrust bearing. If shaft expansion, the fixed bearing can move around the
box.
The channel of the inner ring raceway is slightly less deep than the bearing fi x the ball and outer ring has is
opened in one of sides thus can be disassembled .
Magneto type are small hole diameter bearings ( 4 to 30 mm), mainly used in small generators (Magneto),
gyroscopes and indicating instruments. Generally, the cages used are the brass pressed.
ROLAMENTOS DE CONTATO ANGULAR (ANGULAR CONTACT BALL BEARING)
O canal da pista do anel interno é um pouco menos profundo que o do rolamento fi xo de esferas e o anel
externo tem saída em um dos lados podendo ser desmontado.
São rolamentos pequenos com diâmetro do furo de 4 a 30 mm, usados principalmente em pequenos
geradores (Magneto), giroscópios e instrumentos indicadores.
Geralmente, as gaiolas utilizadas são as prensadas de latão.
ROLAMENTOS MAGNETO (MAGNETO BALL BEARING)
Bearings of this type allow the support of the radial load and axial load in one direction. The ball and the inner and outer rings form contact
angles of 15 °, 25 °, 30 ° or 40 °. The higher the contact angle is the axial load capacity. On the other hand, the lower the better contact angle
will be its use at high speeds.
Generally, the cages are used steel pressings, but for high precision bearings with angle contact less than 30 ° are used primarily polyamide
cages. Are also provided with brass cages.
The angular contact bearings are widely used in combined assembly (mounted in pairs). There are 3 types of fitting in pairs: face to face ,
back to back and tandem.
MU54
O anel interno possui duas pistas e a pista do anel externo tem formato esférico. O centro do raio que forma esta
superfície esférica é coincidente com o centro do rolamento, conseqüentemente, o anel interno, as esferas
e a gaiola inclinam-se livremente em relação ao anel externo.
Os erros de alinhamento que ocorrem devido aos casos como o do desvio na usinagem do eixo e
alojamento, e as deficiências na instalação são corrigidos automaticamente.
Além disso, existem também os rolamentos de furo cônico que são fi xados através de buchas.
Adequados para solicitações em que haja dificuldade de alinhamento do eixo em relação
ao alojamento e em eixos de transmissão de movimento com facilidade de fletir;
• A capacidade de carga axial é reduzida por ter pequeno ângulo de contato;
• O desalinhamento permissível é de 4 a 7° para cargas normais.
The inner ring has two racewayanes and the outer ring raceway is spherical shape. The distance from the center how this spherical surface is
coincident with the bearing center, thus, the inner ring, balls and the cage incline freely in relation to the outer ring.
Alignment errors that occur due to cases such as the shift in axis machining and accommodation, and of fi science at the facility are corrected
automatically. Furthermore, there are also tapered bore bearings are fi xed through bushings.
Suitable for applications where there is shaft alignment difficult compared housing and moving the drive shafts easily to flex;
• The axial load carrying capacity is reduced by having small contact angle;
• The allowable misalignment is 4 to 7 for normal loads.
ROLAMENTOS AUTOCOMPENSADOR DE ESFERAS (SPHERICAL OR SELF ALIGNING BALL BEARING)
rolamento de contato angular dupla carreira de esferas
double row angular contact ball bearing
MU54
ROLAMENTOS DE ROLOS CILINDRICOS (CYLINDRICAL ROLLER BEARING)
Os rolamentos de rolos cilíndricos têm maior capacidade de carga radial que os rolamentos de esferas de mesmas dimensões externas e são
particularmente adequado para serviços pesados. O rolamento apresenta uma linha de contato modificada entre rolos e as pistas para
eliminar concentração de tensões. Esses rolamentos têm uma elevada capacidade de carga radial sendo adequados para altas velocidades.
Devido ao design desmontável, tem a vantagem de montagem do anel interno e anel externo separadamente.
A direcção da carga axial que pode ter um rolamento, dependendo da geometria do rolamento. Muitas variações disponíveis
são apresentados a seguir:.
Arranjo utilizado em motores elétrico e sopradores de
médio porte
Não chegam a se constituir uma classe em separado sendo
considerados rolamentos de rolos cilindricos. Como a largura do
rolete é maior também é maior a capaidade de carga.
Not enough to constitute a class separately being considered
cylindrical roller bearings. As the width of the roll is greater at
higher load capaidade.
The cylindrical roller bearings have greater radial load capacity than ball bearings of same external dimensions and are
particularly suitable for arduous duties. The bearing features a modified line contact between rollers and raceways to eliminate
edge stressing. These bearings have a high radial load capacity and are suitable for high speeds. Due to detachable design
character they have advantage of mounting inner ring and outer ring separately.
The direction of axial load which a bearing can take depending upon the geometry of the bearing. Many variations available
are shown below :
Configuration used for medium size electric motors
and blowers
ROLAMENTOS DE ROLOS ALONGADOS (ELONGATED ROLLERS BEARINGS)
MU54
rolamento agulha em polias
needle bearing sheave block
rolamentos agulha no eixo de um tambor de elevação
hoist drum shaft needle bearings
ROLAMENTOS DE AGULHAS (NEEDLE BEARINGS)
In the needle bearings are inserted a many elongated roller with length of 3 to 10 times the diameter. Consequently, with the small
proportion of the external diameter to the inscribed circle diameter of the rollers they have radial load capacity comparatively larger. So,
are extremely suitable for bearing arrangements where radial space is limited.
Furthermore, there are types fi cations and categorized as: with and without inner ring or inner ring and cage no cage. In caged bearings are
used mainly steel pressed cages.
Nos rolamentos de agulha são inseridos um grande número de rolos finos e alongados com comprimento de 3 a 10 vezes o diâmetro.
Conseqüentemente, com a reduzida proporção do diâmetro externo em relação ao diâmetro do círculo inscrito dos rolos, possuem
capacidade de carga radial comparativamente maior. Portanto, são extremamente indicados para arranjos de rolamentos onde o espaço
radial é limitado.
Além disso, existem tipos e classifi cações como: com anel interno e sem anel interno ou com gaiola e sem gaiola. Nos rolamentos com gaiola
são usadas, principalmente, as gaiolas prensadas de aço.
MU54
Tapered roller bearings are designed so that the apex of the cone formed by the raceways of inner and outer ring, and by rollers, coincide at
a point on the bearing centerline. When applying a radial load, it gives rise to an axial load component. You must use two bearings in
opposition, in some combination or double row. Are used to combined loads, namely radial and axial load.
• The contact angle α determines the axial load capacity of the bearing. The greater the angle, the greater the axial load capacity.
* Intermediate angle: C = 20 °;
* Wide-angle: D = 28;
* Normal angle: without suffix = 17 °.
ROLAMENTOS DE ROLOS CÔNICOS (CONICAL ROLLER BEARINGS)
Os rolamentos de rolos cônicos são projetados de forma que o vértice dos cones formados pelas pistas do anel interno e externo, e pelos
rolos, coincidam em um ponto na linha de centro do rolamento. Quando se aplica uma carga radial, dá-se origem a uma componente de
carga axial. É necessário usar dois rolamentos em oposição, em alguma combinação ou de duas carreiras. São usados para cargas
combinadas, ou seja, carga radial e axial.
• O ângulo de contato α determina a capacidade de carga axial do rolamento. Quanto maior o ângulo, maior a capacidade de carga axial.
∗∗∗∗ ângulo intermediário: C = 20°;
∗∗∗∗ ângulo grande: D = 28°;
∗∗∗∗ ângulo normal: sem sufixo = 17°.
MU54
Na indústria automobilística os rolamentos de rolos cônicos são largamente empregados, como mostrado nos exemplos a seguir.
In the automotive industry tapered roller bearings are widely used, as shown in the following examples.
Catalogo de peças automóveis Ford 1949 - 1954
Ford Cars Catalog Parts 1949 - 1954
Eixo dianteiro de automóvel
Car front shaft
diferential de veículos mostrando os rolamentos de rolos cônicos