Tel: 00 44 (0) 1269 841 324 Fax: 00 44 (0) 1269 831 760 E: [email protected]www.alchemprocess.co.uk HYGIENIC ENGINEERING SOLUTIONS Company Reg No. 6833007 VAT No. GB 826 5437 16 Alchem Process Ltd Unit 3, Church Road Industrial Estate Llanelli, SA14 7NN United Kingdom DS Clamp Gasket V 1.7 Page 1 Viton ® is a registered trade mark of Dupont Dow Elastomer Clamp Gasket Range Our range of seals and gaskets is constantly being updated to cater for advances made in seal technology. As more materials are approved and added to the list of FDA, U.S.D.A. ASME BPE and US Pharamcopoeia Class VI (6) standards, there is a need to constantly update the portfolio. The standard range of elastomer materials offered includes EPDM, Silicone, Nitrile (BUNA-A ® ), PEEK and FKM/Viton ® . Fluoro-polymers such as PTFE solid and PTFE encapsulated seals are also available. Elastomer Seals: The elastomer compounds used to manufacture Clamp Seals in EPDM, Silicone and FKM/Viton ® are in compliance with the Food and Drug Association (FDA) Code of Federation Regulations for rubber and rubber-like materials. This is stipulated under “Title 21, paragraph 177.2600” and also meets the criteria of the Class I materials classification of the 3-A Sanitary Standards U.S.D.A. and standard 51 of the N.S.F. We also confirm that no Phthalate Esters are contained in any plasticization agent used during the manufacturing process Also available is a range of metal detectable elastomer seals. These are produced in BUNA-Nitrile , Red and White Silicone, Black EPDM, Viton ® and 316 stainless steel metal-reinforced PTFE. Ferrite particles are included during the moulding process enabling any dislodged fragments to be revealed in-line using metal sensitive detectors, saving cost and embarrasing product recalls. PTFE Seals: Our Fluoro-polymer Seals are produced from Virgin PTFE and conform to F.D.A Code of Federal Regulations for Teflon ® and Fluorocarbon resin materials under “Title 21, paragraph 177.1550 for use in contact with foodstuffs”. They also meet the criteria Class I material classification for the 3-A Sanitary Standards. PTFE seal fillers such as EPDM and FKM Viton ® are produced from compounds which conform to F.D.A. Code of Federal Regulations for rubber and rubber like material under “Title 21, paragraph 177.2600”. They also meet the criteria Class I material certification of the 3-A Sanitary Standards U.S.D.A. and Standard 51 of N.S.F. Materials: EPDM, FKM (Viton ® ), PTFE, Nitrile, PEEK ® and Platinum Cured Silicone. Standards: FDA, USDA, USP Pharmacopeia Class VI, ASME-BPE and TSE Animal Derivative Free. Related products: • Screen Gaskets • Solid Disc Gaskets • Orifice Plate Gaskets • Clamp Seals • Clamp Seal Blanks • Cone Filters • Sock Gasket
13
Embed
Clamp Gasket Range - Alchem Process Sheets/DS Clamp Seals V.1.7.pdf · The elastomer compounds used to manufacture Clamp Seals in EPDM, ... with the Food and Drug Association ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
H Y G I E N I C E N G I N E E R I N G S O L U T I O N S
Company Reg No. 6833007 VAT No. GB 826 5437 16
Alchem Process LtdUnit 3, Church Road Industrial EstateLlanelli, SA14 7NNUnited Kingdom
DS Clamp Gasket V 1.7 Page 1
Viton® is a registered trade mark of Dupont Dow Elastomer
Clamp Gasket Range
Our range of seals and gaskets is constantly being updated to cater for advances made in seal technology. As more materials are approved and added to the list of FDA, U.S.D.A. ASME BPE and US Pharamcopoeia Class VI (6) standards, there is a need to constantly update the portfolio. The standard range of elastomer materials offered includes EPDM, Silicone, Nitrile (BUNA-A®), PEEK and FKM/Viton®.
Fluoro-polymers such as PTFE solid and PTFE encapsulated seals are also available.
Elastomer Seals:
The elastomer compounds used to manufacture Clamp Seals in EPDM, Silicone and FKM/Viton® are in compliance with the Food and Drug Association (FDA) Code of Federation Regulations for rubber and rubber-like materials. This is stipulated under “Title 21, paragraph 177.2600” and also meets the criteria of the Class I materials classification of the 3-A Sanitary Standards U.S.D.A. and standard 51 of the N.S.F.
We also confirm that no Phthalate Esters are contained in any plasticization agent used during the manufacturing process Also available is a range of metal detectable elastomer seals. These are produced in BUNA-Nitrile , Red and White Silicone, Black EPDM, Viton® and 316 stainless steel metal-reinforced PTFE. Ferrite particles are included during the moulding process enabling any dislodged fragments to be revealed in-line using metal sensitive detectors, saving cost and embarrasing product recalls.
PTFE Seals:
Our Fluoro-polymer Seals are produced from Virgin PTFE and conform to F.D.A Code of Federal Regulations for Teflon® and Fluorocarbon resin materials under “Title 21, paragraph 177.1550 for use in contact with foodstuffs”. They also meet the criteria Class I material classification for the 3-A Sanitary Standards.
PTFE seal fillers such as EPDM and FKM Viton® are produced from compounds which conform to F.D.A. Code of Federal Regulations for rubber and rubber like material under “Title 21, paragraph 177.2600”. They also meet the criteria Class I material certification of the 3-A Sanitary Standards U.S.D.A. and Standard 51 of N.S.F.
Materials:
EPDM, FKM (Viton®), PTFE, Nitrile, PEEK® and Platinum Cured Silicone.
Standards:
FDA, USDA, USP Pharmacopeia Class VI, ASME-BPE and TSE Animal Derivative Free.