CJ6103 ①②③④ INTRODUCTION BLOCK DIAGRAM CJ6103 Series 1 Rev - 1.0 www.jscj-elec.com DESIGNATOR SYMBOL DESCRIPTION ① A Standard ②③ Integer Output Voltage e.g.1.8V=②:1, ③:8 ④ M Package:SOT-23-3L Package:SOT-89-3L FN Package: DFNWB1x1-4L N Package:SOT-23 P z Low Dropout Voltage: 200mV@100mA z Low Quiescent Current:1μA(Typ.) 』 Excellent Line and Load Transient Response 』 Operating Voltage:2.0V~6.5V 』 Output Voltage:0.9 ~ 3.6V 』 High Accuracy:±2%(Typ.) 』 Built-in Current Limiter, Short-Circuit Protection 』 Output Current:200mA ∨ FEATURES ∨ APPLICATIONS 』 Cellular and Smart Phones 』 Laptop, Palmtops and PDA 』 Digital Still and Video Cameras 』 MP3, MP4 Players 』 Radio Control Systems 』 Battery-Powered Equipment ∨ ORDER INFORMATION Low Consumption Current 200mA CMOS Voltage Regulators JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD CJ6103 series is a set of positive voltage regulator manufactured by CMOS process, which has the characteristics of high precision, low power consumption, low voltage difference, and integrates over- current protection and short circuit protection, which can extend the battery life of portable electronic products. CJ6103 series adopts low-ESR ceramic capacitor, which reduces the circuit board space required for power supply application. It can provide 200mA output current with minimal input and output voltage difference, and can still maintain a good adjustment rate. Therefore, it can extend the battery life of portable electronic products, which is very suitable for battery powered equipment, such as RF applications and other systems requiring quiet voltage source.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CJ6103 ①②③④
INTRODUCTION
BLOCK DIAGRAM
CJ6103 Series
1 Rev - 1.0www.jscj-elec.com
DESIGNATOR SYMBOL DESCRIPTION
① A Standard
②③ Integer Output Voltage e.g.1.8V=②:1, ③:8
④M Package:SOT-23-3L
Package:SOT-89-3L
FN Package:DFNWB1x1-4L
N Package:SOT-23
P
Low Dropout Voltage:200mV@100mALow Quiescent Current:1μA(Typ.)Excellent Line and Load TransientResponseOperating Voltage:2.0V~6.5VOutput Voltage:0.9 ~ 3.6VHigh Accuracy:±2%(Typ.)Built-in Current Limiter, Short-CircuitProtectionOutput Current:200mA
FEATURES
APPLICATIONSCellular and Smart PhonesLaptop, Palmtops and PDADigital Still and Video CamerasMP3, MP4 PlayersRadio Control SystemsBattery-Powered Equipment
ORDER INFORMATION
Low Consumption Current 200mA CMOS Voltage Regulators
JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD
CJ6103 series is a set of positive voltage regulator manufactured by CMOS process, which has the characteristics of high precision, low power consumption, low voltage difference, and integrates over-current protection and short circuit protection, which can extend the battery life of portable electronic products. CJ6103 series adopts low-ESR ceramic capacitor, which reduces the circuit board space required for power supply application. It can provide 200mA output current with minimal input and output voltage difference, and can still maintain a good adjustment rate. Therefore, it can extend the battery life of portable electronic products, which is very suitable for battery powered equipment, such as RF applications and other systems requiring quiet voltage source.
PARAMETER SYMBOL RATINGS UNITSInput Voltage(2) VIN VSS -0.3~VSS+7
V
Output Current IOUT 300 mAOutput Voltage(2) VOUT VSS -0.3~VIN+0.3 V
3
Electrical Characteristics
www.jscj-elec.com
Power Dissipation PD
Operating Ambient Temperature TA -25~+85 °C
Storage Temperature Tstg -40~+125 °C
Human Body Model(HBM)
0.3 W
DFNWB1×1-4L 0.3 W
SOT-89-3L 0.5 W
Rev. - 1.0
SOT-23 0.15
W
Tj -40~+125 °C
TYPICAL APPLICATION
SOT-23-3L
(Unless otherwise specified, TA=25°C)
ABSOLUTE MAXIMUM RATINGS(1)
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods my affect device reliability.(2) All voltages are with respect to network ground terminal.(3) ESD testing is performed according to the respective JESD22 JEDEC standard. The human body model is a 100 pF capacitor discharged through a 1.5kΩ resistor into each pin. The machine model is a 200 pF capacitor discharged directly into each pin.
CIN
VIN VOUT
VSS
COUT
VIN VOUT
Ceramic Ceramic
CE
1~10μF
CIN
VIN VOUT
VSS
COUT
VIN VOUT
Ceramic Ceramic1~10μF 1~10μF 1~10μF
Soldering Temperature & Time T solder 260℃, 10s
ESD Rating(3)Machine Model(MM)
Latcu-up Level mA400
4000400
-
V
Operating Junction Temperature
4www.jscj-elec.com Rev. - 1.0
Electrical Characteristics
PARAMETER SYMBOL CONDITIONS MIN. TYP(4). MAX. UNITS
Output Voltage VOUT(E)(5) IOUT=40mAVIN=VOUT+1V
VOUT *0.98
VOUT(6) VOUT *1.02
V
Supply Current ISS 1.0 μA Output Current IOUT - 200 mA
Dropout Voltage Vdif (7) IOUT =100mA VOUT=3.3V
240 mV
Load Regulation ∆VOUT VIN= VOUT +1V,
1mA≤IOUT≤100mA 20 mV
Line Regulation ∆VOUT
VOUT ∆VINIOUT =30mA
VOUT +1V≤VIN≤7V 0.05 %/V
Short Current IShort VOUT =VSS 50 mA
Input Voltage VIN - 2.0 7.0 V
Out Current Limit ILIM VIN =4.3V 300 mA
CJ6103 series (VIN=VOUT+1V, CIN=COUT=1μF, TA=25°C, unless otherwise specified)
(4) Typical numbers are at 25°C and represent the most likely norm.(5) VOUT(E): Effective output voltage (I.e. The output voltage when VIN = (VOUT +1.0V) and maintain a certain IOUT value).(6) Specified output voltage.(7) The difference of output voltage and input voltage when input voltage is decreased gradually till output voltage equals to 98% of VOUT(E).
IMPORTANT NOTICE, PLEASE READ CAREFULLYThe information in this data sheet is intended to describe the operation and characteristics of our products. JSCJ has the right to make any modification, enhancement, improvement, correction or other changes to any content in this data sheet, including but not limited to specification parameters, circuit design and application information, without prior notice. Any person who purchases or uses JSCJ products for design shall: 1. Select products suitable for circuit application and design; 2. Design, verify and test the rationality of circuit design; 3. Procedures to ensure that the design complies with relevant laws and regulations and the requirements of such laws and regulations. JSCJ makes no warranty or representation as to the accuracy or completeness of the information contained in this data sheet and assumes no responsibility for the application or use of any of the products described in this data sheet. Without the written consent of JSCJ, this product shall not be used in occasions requiring high quality or high reliability, including but not limited to the following occasions: medical equipment, automotive electronics, military facilities and aerospace. JSCJ shall not be responsible for casualties or property losses caused by abnormal use or application of this product.