Ensurepass.com Easy Test! Easy Pass! Download the complete collection of Exam's Real Q&As www.ensurepass.com Cisco CCNP 642-832 Exam Vendor:Cisco Exam Code: 642-832 Exam Name: Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT)
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Cisco CCNP 642-832 Exam
Vendor:Cisco
Exam Code: 642-832
Exam Name: Troubleshooting and Maintaining Cisco IP
Switched Networks (TSHOOT)
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
QUESTION 1
The following commands are issued on a Cisco Router:
Router(configuration)#access-list 199 permit tcp host 10.1.1.1 host 172.16.1.1
Router(configuration)#access-list 199 permit tcp host 172.16.1.1 host 10.1.1.1
Router(configuration)#exit
Router#debug ip packet 199
What will the debug output on the console show?
A. All IP packets passing through the router
B. Only IP packets with the source address of 10.1.1.1
C. All IP packets from 10.1.1.1 to 172.16.1.1
D. All IP packets between 10.1.1.1 and 172.16.1.1
Correct Answer: D
QUESTION 2
What level of logging is enabled on a Router where the following logs are screen?
%LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
A. alerts
B. critical
C. errors
D. notifications
Correct Answer: D
QUESTION 3
You have the followings commands on your Cisco Router:
ip ftp username admin
ip ftp password backup
You have been asked to switch from FTP to HTTP. Which two commands will you use to replace the
existing commands?
A. ip http username admin
B. ip http client username admin
C. ip http password backup
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
D. ip http client password backup
E. ip http server username admin
F. ip http server password backup
Correct Answer: BD
QUESTION 4
You have 2 NTP servers in your network - 10.1.1.1 and 10.1.1.2. You want to configurationure a
Cisco router to use 10.1.1.2 as its NTP server before falling back to 10.1.1.1. Which commands will
you use to configurationure the router?
A. ntp server 10.1.1.1
ntp server 10.1.1.2
B. ntp server 10.1.1.1
ntp server 10.1.1.2 primary
C. ntp server 10.1.1.1
ntp server 10.1.1.2 prefer
D. ntp server 10.1.1.1 fallback
ntp server 10.1.1.2
Correct Answer: C
QUESTION 5
The following command is issued on a Cisco Router:
Router(configuration)#logging console warnings
Which alerts will be seen on the console?
A. Warnings only
B. debugging, informational, notifications, warnings
C. warnings, errors, critical, alerts, emergencies
D. notifications, warnings, errors
E. warnings, errors, critical, alerts
Correct Answer: C
QUESTION 6
Which two of the following options are categories of Network Maintenance tasks?
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
A. Firefighting
B. Interrupt-driven
C. Policy-based
D. Structured
E. Foundational
Correct Answer: BD
QUESTION 7
You enabled CDP on two Cisco Routers which are connected to each other. The Line and Protocol
status for the interfaces on both routers show as UP but the routers do not see each other a CDP
neighbors. Which layer of the OSI model does the problem most likely exist?
A. Physical
B. Session
C. Application
D. Data-Link
E. Network
Correct Answer: D
QUESTION 8
FCAPS is a network maintenance model defined by ISO. It stands for which of the following?
A. Fault Management
B. Action Management
C. Configuration Management
D. Protocol Management
E. Security Management
Correct Answer: ACE
QUESTION 9
Which three management categories are contained in the FCAPS network maintenance model?
(Choose three.)
A. Config
B. Fault
C. Storage
D. Accounting
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
E. Redundancy
F. Telecommunications
Correct Answer: ABD
QUESTION 10
What is the result of configuring the logging console warning command?
A. Messages with a severity level of 4 and higher will be logged to all available TTY lines.
B. Only warning messages will be logged on the console.
C. Warning, error, critical, and informational messages will be logged on the console.
D. Warning, critical, alert, and emergency messages will be logged on the console.
E. The logging console warning command needs to be followed in the configuration with logging
buffered byte size to specify the message buffer size for the console.
Correct Answer: D
QUESTION 11
Refer to the shown below. What statement is correct regarding the output shown in the graphic?
% LINK-3-UPDOWN: Interface Serial0/0, change state to up
% LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up
A. These two log messages will not have severity level. They are not errors but are just
informational messages.
B. The first log message is categorized as a warning message.
C. These messages regarding interface status are normal output and will always be displayed
when you exit config mode.
D. The first log message is an error message with a severity level of 3.
E. The second message would be shown if the logging console warning command had been
issued.
Correct Answer: D
QUESTION 12
Refer to the configuration statements shown in the graphic above. Which statement reflects what
the effect is of this configuration sequence?
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
A. These commands will generate an error message because you cannot use an access list with
any debug commands.
B. These commands will have no effect at all. The debug ip packet command will work as normal
and display info for all IP packets.
C. These commands turn on debug ip packet only for packets between hosts 10.1.1.1 and
172.16.1.1.
D. These commands will only work when you specify only one host rather than two.
Correct Answer: C
QUESTION 13
What is the result if you configure two devices with the ntp server command?
A. Nothing will happen until one of the devices is configured with the prefer parameter.
B. The NTP protocol will determine which server is most reliable and will synchronize to that
server.
C. The device with the highest priority will become the active server and the other device will
become the backup server.
D. The device with the lowest MAC address will become the active server and the other device
will become the backup server.
Correct Answer: B
QUESTION 14
A technician is troubleshooting connectivity problems between two routers that are directly
connected through a serial line. The technician notices that the serial line is up, but cannot see any
neighbors displayed in the output of the show cdp neighbors command. In which OSI layer is the
problem most likely occurring?
A. physical
B. data link
C. network
D. transport
E. application
Correct Answer: B
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
QUESTION 15
What are two approaches to maintaining a network?(Choose two)
A. PPDIOO
B. structured
C. bottoms up
D. interrupt-driven
Correct Answer: BD
QUESTION 16
FCAPS is a network maintenance model defined by ISO. FCAPS stands for:
Correct Answer:
QUESTION 17
There are many Network Maintenance models. Match the model names on the left to the options
on the right:
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Correct Answer:
QUESTION 18
Match the items on the left to their purpose on the right:
Correct Answer:
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
QUESTION 19
Ticket 1: Switch Port Trunk
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Client 1 and Client 2 are getting a 169.x.x.x IP address and are not able to ping DSW1 or the FTP
Server. They are able to ping each other.
Configuration on ASW1
Interface PortChannel13 switchport mode trunk
switchport trunk allowed vlan 1-9
!
Interface PortChannel23 switchport mode trunk
switchport trunk allowed vlan 1-9
!
Interface FastEthernet1/0/1 switchport mode access switchport access vlan 10
!
Interface FastEthernet1/0/2 switchport mode access switchport access vlan 10
!
On which device is the fault condition located?
A. ASW1
B. DSW1
C. Client 1
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
D. FTP Server
E. ASW2
F. DSW2
Correct Answer: A
QUESTION 20
Ticket 1: Switch Port Trunk
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Configuration on ASW1
The Fault Condition is related to which technology?
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
A. NTP
B. Switch to Switch Connectivity
C. Access Vlans
D. Port Security
E. VLAN ACL / Port ACL
F. Switch Virtual Interface
Correct Answer: B
QUESTION 21
Ticket 1: Switch Port Trunk
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Client 1 and Client 2 are getting a 169.x.x.x IP address and are not able to ping DSW1 or the FTP
Server. They are able to ping each other.
Configuration on ASW1
Interface PortChannel13
switchport mode trunk
switchport trunk allowed vlan 1-9
!
Interface PortChannel23
switchport mode trunk
switchport trunk allowed vlan 1-9
!
Interface FastEthernet1/0/1
switchport mode access
switchport access vlan 10
!
Interface FastEthernet1/0/2
switchport mode access
switchport access vlan 10
!
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
What is the solution of the fault condition?
A. Change the VLAN assignment on fa1/0/1 and fa1/0/2 on ASW1 to VLAN 1
B. Change the IP Address of VLAN 10 on DSW1
C. Issue switchport trunk allowed vlan 10,200 on interface portchannel13 and portchannel23 on
ASW1
D. Issue switchport trunk allowed vlan none on interface portchannel13 and portchanngel23 on
ASW1
Correct Answer: C
QUESTION 22
Ticket 2: Access VLAN
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Client 1 and Client 2 are getting a 169.x.x.x IP address and are not able to ping DSW1 or the FTP
Server. They are able to ping each other.
Configuration on ASW1
Interface FastEthernet1/0/1
switchport mode access
switchport access vlan 1
!
Interface FastEthernet1/0/2
switchport mode access
switchport access vlan 1
On which device is the fault condition located?
A. DSW1
B. ASW1
C. Client 1
D. FTP Server
E. DSW2
F. ASW2
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Correct Answer: B
QUESTION 23
Ticket 2: Access VLAN
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Use the supported commands to isolate the cause of this fault and answer the following questions.
Configuration on ASW1
The fault condition is related to switch technology?
A. NTP
B. Switch-to-Switch Connectivity
C. Loop Prevention
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
D. Access Vlans
E. VLAN ACL Port ACL
F. Switch Virtual Interface
G. Port Security
Correct Answer: D
QUESTION 24
Ticket 2: Access VLAN
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Use the supported commands to isolate the cause of this fault and answer the following questions.
Configuration on ASW1
What is the solution to the fault condition?
A. In Configuration mode, using the interface range Fastethernet 1/0/1 - 2, then switchport mode
access vlan 10 command.
B. In Configuration mode, using the interface rante Fastethernet 1/0/1 - 2, then switchport access
mode vlan 10 command.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
C. In Configuration mode, using the interface range Fastethernet 1/0/1 - 2, then switchport vlan
10 access command.
D. In Configuration mode, using the interface range Fastethernet 1/0/1 - 2, then switchport access
vlan 10 command.
Correct Answer: D
QUESTION 25
Ticket 3: OSPF Authentication
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Use the supported commands to isolate the cause of this fault and answer the following questions.
Configuration on R1 and R2
On which is the fault condition located?
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
A. R1
B. R2
C. R3
D. R4
E. DSW1
F. DSW2
G. ASW1
H. ASW2
Correct Answer: A
QUESTION 26
Ticket 3: OSPF Authentication
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Use the supported commands to isolate the cause of this fault and answer the following questions.
Configuration on R1 and R2
The fault condition is related to which technology?
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
A. BGP
B. NTP
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Correct Answer: D
QUESTION 27
Ticket 3: OSPF Authentication
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement:
Client 1 is able to ping 10.1.1.2 but not 10.1.1.1. Initial troubleshooting shows that R1 does not
have any OSPF neighbors or any OSPF routes
Configuration on R1:
router ospf 1
log-adjacency-changes
network 10.1.1.0 0.0.0.3 area 12
default-information originate always
!
interfaceSerial0/0/0/0.12 point-to-point
ip address 10.1.1.1 255.255.255.252
ip nat inside
ip ospf message-digest-key 1 md5 TSHOOT
Configuration on R2:
router ospf 1
log-adjacency-changes
network 10.1.1.0 0.0.0.3 area 12
!
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
interfaceSerial0/0/0/0.12 point-to-point
ip address 10.1.1.2 255.255.255.252
ip ospf authentication message-digest
ip ospf message-digest-key 1 md5 TSHOOT
What is the solution of the fault condition?
A. ip ospf authentication message-digest command has to be added on S0/0/0/0.12
B. ip ospf authentication message-digest command has to be added under the OSPF routing
process
C. A static route to 10.1.1.4 must be added on R1
D. ip nat outside must be added on S0/0/0/0.12
E. ip ospf authentication command has to be added on router ospf 1 on R1
F. ip ospf authentication command has to be added on router ospf 1 on R2
Correct Answer: A
QUESTION 28
Ticket 4: BGP Neighbor
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Use the supported commands to isolate the cause of this fault and answer the following questions.
Configuration on R1
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
On which is the fault condition located?
A. R1
B. R2
C. R3
D. R4
E. DSW1
F. DSW2
G. ASW1
H. ASW2
Correct Answer: A
QUESTION 29
Ticket 4: BGP Neighbor
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Client 1 is able to ping 209.65.200.226 but not the Web Server at 209.65.200.241. Initial
troubleshooting shows and R1 does not have any BGP routes. R1 also does not show any active
BGP neighbor
Configuration on R1
router bgp 65001
no synchronization
bgp log-neighbor-changes
network 209.65.200.224 mask 255.255.255.252
neighbor 209.56.200.226 remote-as 65002
no auto-summary
R1#sh bgp ipv4 unicast neighbors
BGP neighbor is 209.56.200.226, remote AS 65002, external link
BGP version 4, remote router ID 0.0.0.0
BGP state = Idle
Last read 00:00:20, last write 00:00:20, hold time is 180, keepalive interval is 60 seconds
Message statistics:
InQ depth is 0
OutQ depth is 0
Sent Rcvd
Opens: 0 0
Notifications: 0 0
Updates: 0 0
Keepalives: 0 0
Route Refresh: 0 0
Total: 0 0
Default minimum time between advertisement runs is 30 seconds
For address family: IPv4 Unicast
BGP table version 2, neighbor version 0/0
Output queue size: 0
Index 1, Offset 0, Mask 0x2
1 update-group member
Sent Rcvd
Prefix activity: ---- ----
Prefixes Current: 0 0
Prefixes Total: 0 0
Implicit Withdraw: 0 0
Explicit Withdraw: 0 0
Used as bestpath: n/a 0
Used as multipath: n/a 0
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Outbound Inbound
Local Policy Denied Prefixes: -------- -------
Total: 0 0
Number of NLRIs in the update sent: max 0, min 0
Connections established 0; dropped 0
Last reset never
External BGP neighbor not directly connected.
No active TCP connection
The Fault Condition is related to which technology?
A. EIGRP
B. HSRP
C. BGP
D. OSPF
E. OSPFv3
F. RIP
Correct Answer: C
QUESTION 30
Ticket 4: BGP Neighbor
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Use the supported commands to isolate the cause of this fault and answer the following questions.
Configuration on R1
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
What is the solution to the fault condition?
A. Under the BGP process, enter the bgp redistribute-internal command.
B. Under the BGP process, bgp confederation identifier 65001 command.
C. Delete the current BGP process and reenter all of the commands using 65002 as the AS number.
D. Under the BGP process, delete the neighbor 209.56.200.226 remote-as 65002 command and
enter the neighbor 209.65.200.226 remote-as 65002 command.
Correct Answer: D
QUESTION 31
Ticket 5: NAT ACL
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Client 1 and Client 2 are not able to reach the WebServer at 209.65.200.241. Initial troubleshooting
shows that DSW1, DSW2 and all the routers are able to reach the WebServer
Configuration on R1
ip nat inside source list nat_pool interface Serial0/0/0/1 overload !
ip access-list standard nat_pool
permit 10.1.0.0
!
interface Serial0/0/0/1
ip address 209.65.200.224 255.255.255.252
ip nat outside
!
interfaceSerial0/0/0/0.12
ip address 10.1.1.1 255.255.255.252
ip nat inside
ip ospf message-digest-key 1 md5 TSHOOT
ip ospd authentication message-digest
On which device is the fault condition located?
A. R1
B. DSW1
C. R4
D. R2
E. R3
F. DSW2
Correct Answer: A
QUESTION 32
Ticket 5: NAT ACL
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Client 1 and Client 2 are not able to reach the WebServer at 209.65.200.241. Initial troubleshooting
shows that DSW1, DSW2 and all the routers are able to reach the WebServer
Configuration on R1
ip nat inside source list nat_pool interface Serial0/0/0/1 overload !
ip access-list standard nat_pool
permit 10.1.0.0
!
interface Serial0/0/0/1
ip address 209.65.200.224 255.255.255.252
ip nat outside
!
interfaceSerial0/0/0/0.12
ip address 10.1.1.1 255.255.255.252
ip nat inside
ip ospf message-digest-key 1 md5 TSHOOT
ip ospd authentication message-digest
The Fault Condition is related to which technology?
A. EIGRP
B. HSRP
C. BGP
D. NAT
E. OSPF
F. OSPFv3
Correct Answer: D
QUESTION 33
Ticket 5: NAT ACL
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Client 1 and Client 2 are not able to reach the WebServer at 209.65.200.241. Initial troubleshooting
shows that DSW1, DSW2 and all the routers are able to reach the WebServer
Configuration on R1
ip nat inside source list nat_pool interface Serial0/0/0/1 overload
!
ip access-list standard nat_pool
permit 10.1.0.0
!
interface Serial0/0/0/1
ip address 209.65.200.224 255.255.255.252
ip nat outside
!
interfaceSerial0/0/0/0.12
ip address 10.1.1.1 255.255.255.252
ip nat inside
ip ospf message-digest-key 1 md5 TSHOOT
ip ospd authentication message-digest
What is the solution of the fault condition?
A. Add permit 10.2.0.0 statement in nat_pool access-list
B. Remove permit 10.1.0.0 statement from nat_pool access-list
C. Change ip nat inside source list nat_pool interface Serial0/0/0/1 overload to ip nat inside source
list nat_pool interface Serial0/0/0/0.12 overload
D. Change ip nat outside statement under Serial0/0/0/1 configuration to ip nat inside
Correct Answer: A
QUESTION 34
Ticket 6: ACL
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Configuration on R1
On which device is the fault condition located?
A. R1
B. R2
C. R3
D. R4
E. DSW1
F. DSW2
G. ASW1
Correct Answer: A
QUESTION 35
Ticket 6: ACL
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Client 1 is not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that
R1 is also not able to reach the WebServer. R1 also does not have any active BGP neighbor.
Config on R1
router bgp 65001
no synchronization
bgp log-neighbor-changes
network 209.65.200.224 mask 255.255.255.252
neighbor 209.65.200.226 remote-as 65002
no auto-summary
!
access-list 30 permit host 209.65.200.241
access-list 30 deny 10.1.0.0 0.0.255.255
access-list 30 deny 10.2.0.0 0.0.255.255
!
interface Serial0/0/0/1
ip address 209.65.200.224 255.255.255.252
ip nat outside
ip access-group 30 in
On which device is the fault condition located?
A. R1
B. DSW1
C. R4
D. R2
E. DSW2
F. R3
Correct Answer: A
QUESTION 36
Ticket 6: ACL
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Client 1 is not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that
R1 is also not able to reach the WebServer. R1 also does not have any active BGP neighbor.
Config on R1
router bgp 65001
no synchronization
bgp log-neighbor-changes
network 209.65.200.224 mask 255.255.255.252
neighbor 209.65.200.226 remote-as 65002
no auto-summary
!
access-list 30 permit host 209.65.200.241
access-list 30 deny 10.1.0.0 0.0.255.255
access-list 30 deny 10.2.0.0 0.0.255.255
!
interface Serial0/0/0/1
ip address 209.65.200.224 255.255.255.252
ip nat outside
ip access-group 30 in
The Fault Condition is related to which technology?
A. IP Access
B. IP NAT
C. BGP
D. IP Access List
E. OSPF
F. Add permit statement for 209.65.200.224/30 network in access list 30
Correct Answer: D
QUESTION 37
Ticket 6: ACL
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Client 1 is not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that
R1 is also not able to reach the WebServer. R1 also does not have any active BGP neighbor.
Config on R1
router bgp 65001
no synchronization
bgp log-neighbor-changes
network 209.65.200.224 mask 255.255.255.252
neighbor 209.65.200.226 remote-as 65002
no auto-summary
!
access-list 30 permit host 209.65.200.241
access-list 30 deny 10.1.0.0 0.0.255.255
access-list 30 deny 10.2.0.0 0.0.255.255
!
interface Serial0/0/0/1
ip address 209.65.200.224 255.255.255.252
ip nat outside
ip access-group 30 in
What is the solution of the fault condition?
A. Add permit statement for 209.65.200.224/30 network in access list 30
B. Remove Deny Statements from access-list 30
C. Change neighbor 209.65.200.226 remote-as 65002 statement to neighbor 209.65.200.226
remote-as 65001
D. Use extended access-list instead of standard access-list
Correct Answer: A
QUESTION 38
Ticket 7: Port Security
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Client one is getting a 169.x.x.x IP address and is not able to ping Client 2 or DSW1. Inital
troubleshooting shows that port Fa1/0/1 on ASW1 is in errdisable state.
Configuration on ASW1
Interface FastEthernet1/0/1
switchport mode access
switchport port-security
switchport port-security mac-address 0000.0000.0001
On which device is the fault condition located?
A. DSW1
B. ASW1
C. Client 1
D. FTP Server
E. ASW2
F. DSW2
Correct Answer: B
QUESTION 39
Ticket 7: Port Security
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Client one is getting a 169.x.x.x IP address and is not able to ping Client 2 or DSW1. Inital
troubleshooting shows that port Fa1/0/1 on ASW1 is in errdisable state.
Configuration on ASW1
Interface FastEthernet1/0/1
switchport mode access
CertKiller.com
switchport port-security
switchport port-security mac-address 0000.0000.0001
The Fault Condition is related to which technology?
A. VLAN Access Map
B. InterVLAN communication
C. DHCP
D. Port Security
E. ASW2
F. DSW1
Correct Answer: D
QUESTION 40
Ticket 7: Port Security
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Client one is getting a 169.x.x.x IP address and is not able to ping Client 2 or DSW1. Inital
troubleshooting shows that port Fa1/0/1 on ASW1 is in errdisable state.
Configuration on ASW1
Interface FastEthernet1/0/1
switchport mode access
switchport port-security
switchport port-security mac-address 0000.0000.0001
What is the solution of the fault condition?
A. Configurationure Static IP Address on Client 1
B. Change the IP Address of VLAN 10 on DSW1
C. Issue shutdown command followed by no shutdown command on port fa1/0/1 on ASW1
D. Issue no switchport port-security mac-address 0000.0000.0001 command followed by
shutdown and no shutdown command on port fa1/0/1 on ASW1
E. Issue no switchport port-security mac-address 0000.0000.0001 command on port fa1/0/1 on
ASW1
Correct Answer: D
QUESTION 41
Ticket 8: Redistribution of EIGRP to OSPF
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Client 1 is not able to reach the WebServer. Initial troubleshooting shows that DSW1 can ping the
Fa0/1 interface of R4 but not the s0/0/0/0.34 interface.
Configuration on DSW1
router eigrp 10
network 10.1.4.4 0.0.0.0
network 10.2.1.1 0.0.0.0
network 10.2.4.13 0.0.0.0
no auto-summary
Configuration on DSW2
router eigrp 10
network 10.1.4.8 0.0.0.0
network 10.2.2.1 0.0.0.0
network 10.2.4.14 0.0.0.0
no auto-summary
Configuration on R4
router eigrp 10
network 10.1.4.5 0.0.0.0
no auto-summary
redistribute ospf 1 metric 100 10 255 1 1500 route-map EIGRP_to_OSPF
!
router ospf 1
network 10.1.1.8 0.0.0.0 area 34
redistribute eigrp 10 subnets
!
route-map EIGRP->OSPF
match ip address 1
!
access-list 1 permit 10.0.0.0 0.255.255.255
access-list 1 permit 209.0.0.0 0.255.255.255
What is the solution of the fault condition?
A. DSW1
B. DSW2
C. Client 1
D. Client 2
E. R4
Correct Answer: E
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
QUESTION 42
Ticket 8: Redistribution of EIGRP to OSPF
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Client 1 is not able to reach the WebServer. Initial troubleshooting shows that DSW1 can ping the
Fa0/1 interface of R4 but not the s0/0/0/0.34 interface.
Configuration on DSW1
router eigrp 10
network 10.1.4.4 0.0.0.0
network 10.2.1.1 0.0.0.0
network 10.2.4.13 0.0.0.0
no auto-summary
Configuration on DSW2
router eigrp 10
network 10.1.4.8 0.0.0.0
network 10.2.2.1 0.0.0.0
network 10.2.4.14 0.0.0.0
no auto-summary
Configuration on R4
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
router eigrp 10
network 10.1.4.5 0.0.0.0
no auto-summary
redistribute ospf 1 metric 100 10 255 1 1500 route-map EIGRP_to_OSPF !
router ospf 1
network 10.1.1.8 0.0.0.0 area 34
redistribute eigrp 10 subnets
!
route-map EIGRP->OSPF
match ip address 1
!
access-list 1 permit 10.0.0.0 0.255.255.255
access-list 1 permit 209.0.0.0 0.255.255.255
The Fault Condition is related to which technology?
A. EIGRP
B. Route Redistribution
C. OSPF
D. IP Addressing
E. HSRP
F. BGP
Correct Answer: B
QUESTION 43
Ticket 8: Redistribution of EIGRP to OSPF
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Use the supported commands to isolate the cause of this fault and answer the following questions.
Configuration on R4
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
What is the solution to the fault condition?
A. Under the EIGRP process, delete the redistribute ospf 1 route-map OSPF_to_EIGRP command
and enter the redistribute ospf 1 route-map OSPF->EIGRP command.
B. Under the EIGRP process, delete the redistribute ospf 1 route-map OSPF_to_EIGRP command
and enter the redistribute ospf 6 metric route-map OSPF->EIGRP command.
C. Under the EIGRP process, delete the redistribute EIGRP 10 subnets route-map EIGRP->OSPF
command and enter the redistribute eigrp 10 subnets route-map OSPF->EIGRP command.
D. Under the EIGRP process, delete the redistribute EIGRP 10 subnets route-map EIGRP->OSPF
command and enter the redistribute eigrp 10 subnets route-map EIGRP->OSPF command.
Correct Answer: A
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
QUESTION 44
Ticket 9: EIGRP AS number
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Client 1 is not able to reach the WebServer. Initial troubleshooting shows that DSW1 can ping the
Fa0/1 interface of R4 but not the s0/0/0/0.34 interface.
Configuration on DSW1
router eigrp 10
network 10.1.4.4 0.0.0.0
network 10.2.1.1 0.0.0.0
network 10.2.4.13 0.0.0.0
no auto-summary
Configuration on DSW2
router eigrp 10
network 10.1.4.8 0.0.0.0
network 10.2.2.1 0.0.0.0
network 10.2.4.14 0.0.0.0
no auto-summary
Configuration on R4
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
router eigrp 1
network 10.1.4.5 0.0.0.0
no auto-summary
redistribute ospf 1
On which device is the fault condition located?
A. DSW1
B. DSW2
C. Client 1
D. R4
E. R2
F. R1
G. R3
Correct Answer: D
QUESTION 45
Ticket 9: EIGRP AS number
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Client 1 is not able to reach the WebServer. Initial troubleshooting shows that DSW1 can ping the
Fa0/1 interface of R4 but not the s0/0/0/0.34 interface.
Configuration on DSW1
router eigrp 10
network 10.1.4.4 0.0.0.0
network 10.2.1.1 0.0.0.0
network 10.2.4.13 0.0.0.0
no auto-summary
Configuration on DSW2
router eigrp 10
network 10.1.4.8 0.0.0.0
network 10.2.2.1 0.0.0.0
network 10.2.4.14 0.0.0.0
no auto-summary
Configuration on R4
router eigrp 1
network 10.1.4.5 0.0.0.0
no auto-summary
redistribute ospf 1
The Fault Condition is related to which technology?
A. EIGRP
B. InterVLAN communication
C. OSPF
D. Switch to Switch Connectivity
E. BGP
F. HSRP
Correct Answer: A
QUESTION 46
Ticket 9: EIGRP AS number
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
the 209.65.200.241 address.
Use the supported commands to isolate the cause of this fault and answer the following questions.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Configuration on R4
What is the solution to the fault condition?
A. Disable auto summary on the EIGRP process.
B. Enable EIGRP on the FastEthernet0/0 and FastEthernet0/1 interface using the no passive-
interface command.
C. Change the AS number on the EIGRP routing process from 1 to 10 to much the AS number
used on DSW1 and DSW2.
D. Under the EIGRP process, delete the network 10.1.4.0 0.0.0.255 command and enter the
network 10.1.4.4 0.0.0.252 and 10.1.4.8 0.0.0.252 commands.
Correct Answer: C
QUESTION 47
Ticket 10: VLAN Access Map
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Client 1 is getting an IP address from the DHCP server but is not able to ping DSW1 or the FTP
Server
Configuration on DSW1
vlan access-map test1 10
drop
match ip address 10
!
vlan filter test1 vlan-list 10
!
ip access-list standard 10
permit 10.2.0.0 0.0.255.255
!
Interface VLAN10
ip address 10.2.1.1 255.255.255.0
!
On which device is the fault condition located?
A. R4
B. DSW1
C. Client 1
D. FTP Server
E. DSW2
F. R1
Correct Answer: B
QUESTION 48
Ticket 10: VLAN Access Map
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Use the supported commands to isolate the cause of this fault and answer the following questions.
Configuration on DSW1
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
DSW1
vlan access-map test1 10
action drop
match ip address 10
vlan access-map test1 20
action drop
match ip address 20
vlan access-map test1 30
action foward
match ip address 30
vlan access-map test1 40
action foward
!
vlan filter test1 vlan-list 10
vlan internal allocation policy asdending
!
access-list 10 permit 10.2.1.3
access-list 20 permit 10.2.1.4
access-list 30 permit 10.2.1.0 0.0.0.255
The fault condition is related to which technology?
A. NTP
B. IP DHCP Helper
C. IPv4 EIGRP Routing
D. IPv6 RIP Routing
E. IPv4 layer 3 security
F. Switch-to-Switch Connectivity
G. Loop Prevention
H. Access Vlans
I. Port Security
J. VLAN ACL / Port ACL
K. Switch Virtual Interface
Correct Answer: J
QUESTION 49
Ticket 10: VLAN Access Map
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Client 1 is getting an IP address from the DHCP server but is not able to ping DSW1 or the FTP
Server
Configuration on DSW1
vlan access-map test1 10
drop
match ip address 10
!
vlan filter test1 vlan-list 10
!
ip access-list standard 10
permit 10.2.0.0 0.0.255.255
!
Interface VLAN10
ip address 10.2.1.1 255.255.255.0
!
The Fault Condition is related to which technology?
A. VLAN Access Map
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
B. InterVLAN communication
C. DHCP
D. IP Access List
E. VLAN Map
Correct Answer: A
QUESTION 50
Ticket 10: VLAN Access Map
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Client 1 is getting an IP address from the DHCP server but is not able to ping DSW1 or the FTP
Server
Configuration on DSW1
vlan access-map test1 10
drop
match ip address 10
!
vlan filter test1 vlan-list 10
!
ip access-list standard 10
permit 10.2.0.0 0.0.255.255
!
Interface VLAN10
ip address 10.2.1.1 255.255.255.0
!
What is the solution of the fault condition?
A. Configurationure Static IP Address on Client 1
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
B. Change the IP Address of VLAN 10 on DSW1
C. Add Permit any statement to access-list 10
D. Remove VLAN filter test1 from DSW1
Correct Answer: D
QUESTION 51
Ticket 10: VLAN Access Map
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Use the supported commands to isolate the cause of this fault and answer the following questions.
Configuration on DSW1
DSW1
vlan access-map test1 10
action drop
match ip address 10
vlan access-map test1 20
action drop
match ip address 20
vlan access-map test1 30
action foward
match ip address 30
vlan access-map test1 40
action foward
!
vlan filter test1 vlan-list 10
vlan internal allocation policy asdending
!
access-list 10 permit 10.2.1.3
access-list 20 permit 10.2.1.4
access-list 30 permit 10.2.1.0 0.0.0.255
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
The fault condition is related to which technology?
A. Under the global configuration mode enter no access-list 10 command.
B. Under the global configuration mode enter no access-map vlan 10 command.
C. Under the global configuration mode enter no vlan access-map test1 10 command.
D. Under the global configuration mode enter no vlan filter test1 vlan-list 10 command.
Correct Answer: C
QUESTION 52
Ticket 11: IPv6 OSPF
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
The network setup for this trouble ticket is shown in exhibit.
Trouble Ticket Statement
DSW1 and R4 cannot ping R2's loopback or R2's s0/0/0/0.12 IPv6 address. Initial troubleshooting
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
shows and R2 is not an OSPFv3 neighbor on R3.
Configuration on R2
ipv6 unicast-routing
!
ipv6 router ospf 6
router-id 2.2.2.2
!
interface s0/0/0/0.23
ipv6 address 2026::1:1/122
Configuration on R3
ipv6 unicast-routing
!
ipv6 router ospf 6
router-id 3.3.3.3
!
interface s0/0/0/0.23
ipv6 address 2026::1:2/122
ipv6 ospf 6 area 0
On which device is the fault condition located?
A. DSW1
B. DSW2
C. R2
D. R3
E. R1
F. R4
Correct Answer: C
QUESTION 53
Ticket 11: IPv6 OSPF
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
The network setup for this trouble ticket is shown in exhibit.
Trouble Ticket Statement
DSW1 and R4 cannot ping R2's loopback or R2's s0/0/0/0.12 IPv6 address. Initial troubleshooting
shows and R2 is not an OSPFv3 neighbor on R3.
Configuration on R2
ipv6 unicast-routing
!
ipv6 router ospf 6
router-id 2.2.2.2
!
interface s0/0/0/0.23
ipv6 address 2026::1:1/122
Configuration on R3
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
ipv6 unicast-routing
!
ipv6 router ospf 6
router-id 3.3.3.3
!
interface s0/0/0/0.23
ipv6 address 2026::1:2/122
ipv6 ospf 6 area 0
The Fault Condition is related to which technology?
A. IPv6 Addressing
B. Route Redistribution
C. OSPFv3
D. RIPng
E. BGP
Correct Answer: C
QUESTION 54
Ticket 11: IPv6 OSPF
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
The network setup for this trouble ticket is shown in exhibit.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
DSW1 and R4 cannot ping R2's loopback or R2's s0/0/0/0.12 IPv6 address. Initial troubleshooting
shows and R2 is not an OSPFv3 neighbor on R3.
Configuration on R2
ipv6 unicast-routing
!
ipv6 router ospf 6
router-id 2.2.2.2
!
interface s0/0/0/0.23
ipv6 address 2026::1:1/122
Configuration on R3
ipv6 unicast-routing
!
ipv6 router ospf 6
router-id 3.3.3.3
!
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
interface s0/0/0/0.23
ipv6 address 2026::1:2/122
ipv6 ospf 6 area 0
What is the solution of the fault condition?
A. Add ipv6 ospf 6 area 0 under s0/0/0/0.23 on R2
B. Add ipv6 ospf 6 area 6 under s0/0/0/0.23 on R2
C. Remove IPv6 address from s0/0/0/0.23 on R2
D. Enable IPv6 routing on s0/0/0/0.23 on R2
Correct Answer: A
QUESTION 55
Ticket 12: HSRP Issue
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
HSRP has been configurationured between DSW1 and DSW2. DSW1 is configurationured to be
active router but it never becomes active even though the HSRP communication between DSW1
and DSW2 is working.
Configuration on DSW1
track 1 ip route 10.1.21.128 255.255.0.0 metric threshold threshold metric up 1 down 2
!
track 10 ip route 10.2.21.128 255.255.255.0 metric threshold threshold metric up 63 down 64
!
interface Vlan10
ip address 10.2.1.1 255.255.255.0
standby 10 ip 10.2.1.254
standby 10 priority 200
standby 10 preempt
standby 10 track 1 decrement 60
Configuration on R4
interface loopback0
ip address 10.2.21.128 255.255.255.0
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
On which device is the fault condition located?
A. R4
B. DSW2
C. DSW1
D. R3
E. R2
F. R1
Correct Answer: C
QUESTION 56
Ticket 12: HSRP Issue
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
HSRP has been configurationured between DSW1 and DSW2. DSW1 is configurationured to be
active router but it never becomes active even though the HSRP communication between DSW1
and DSW2 is working.
Configuration on DSW1
track 1 ip route 10.1.21.128 255.255.0.0 metric threshold threshold metric up 1 down 2
!
track 10 ip route 10.2.21.128 255.255.255.0 metric threshold threshold metric up 63 down 64
!
interface Vlan10
ip address 10.2.1.1 255.255.255.0
standby 10 ip 10.2.1.254
standby 10 priority 200
standby 10 preempt
standby 10 track 1 decrement 60
Configuration on R4
interface loopback0
ip address 10.2.21.128 255.255.255.0
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Fault Condition is related to which technology?
A. GLBP
B. HSRP
C. OSPF
D. Switch to Switch Connectivity
E. VRRP
F. EIGRP
Correct Answer: B
QUESTION 57
Ticket 12: HSRP Issue
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
HSRP has been configurationured between DSW1 and DSW2. DSW1 is configurationured to be
active router but it never becomes active even though the HSRP communication between DSW1
and DSW2 is working.
Configuration on DSW1
track 1 ip route 10.1.21.128 255.255.0.0 metric threshold threshold metric up 1 down 2
!
track 10 ip route 10.2.21.128 255.255.255.0 metric threshold threshold metric up 63 down 64
!
interface Vlan10
ip address 10.2.1.1 255.255.255.0
standby 10 ip 10.2.1.254
standby 10 priority 200
standby 10 preempt
standby 10 track 1 decrement 60
Configuration on R4
interface loopback0
ip address 10.2.21.128 255.255.255.0
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
What is the solution of fault condition?
A. Change standby priority to 140
B. Change standby priority to 260
C. Change standby 10 track 1 decrement 60 to standby 10 track 10 decrement 60
D. Change standby 10 track 1 decrement 60 to standby 10 track 1 decrement 100
E. Change standby 10 track 1 decrement 60 to standby 10 track 10 decrement 100
F. Change standby 10 track 1 decrement 60 to standby 10 track 1 decrement 60
Correct Answer: C
QUESTION 58
Ticket 13: DHCP Issue Topology Overview
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Client should have IP 10.2.1.3
EIGRP 100 is running between switch DSW1 & DSW2
OSPF (Process ID 1) is running between R1, R2, R3, R4
Network of OSPF is redistributed in EIGRP
BGP 65001 is configured on R1 with Webserver cloud AS 65002
HSRP is running between DSW1 & DSW2 switches
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Question:
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating DSWA will not become
the active outer for HSRP group 10.
Configuration on R4 was:
!
ip dhcp exclude 10.2.1.1-10.2.1.253
!
The fault condition is related to which technology?
A. R4
B. DSW1
C. DSW2
D. ASW1
E. ASW2
F. Client 1
G. Client 2
Correct Answer: A
QUESTION 59
Ticket 13: DHCP Issue Topology Overview
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Client should have IP 10.2.1.3
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
EIGRP 100 is running between switch DSW1 & DSW2
OSPF (Process ID 1) is running between R1, R2, R3, R4
Network of OSPF is redistributed in EIGRP
BGP 65001 is configured on R1 with Webserver cloud AS 65002
HSRP is running between DSW1 & DSW2 switches
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Question:
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating DSWA will not become
the active outer for HSRP group 10.
Configuration on R4 was:
!
ip dhcp exclude 10.2.1.1-10.2.1.253
!
The fault condition is related to which technology?
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
A. NTP
B. IP DHCP Server
C. IPv4 EIGRP Routing
D. IPv6 RIP Routing
E. IPv4 layer 3 security
F. Switch-to-Switch Connectivity
G. Loop Prevention
H. Access Vlans
I. Port Security
J. VLAN ACL / Port ACL
K. Switch Virtual Interface
Correct Answer: B
QUESTION 60
Ticket 13: DHCP Issue Topology Overview
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Client should have IP 10.2.1.3
EIGRP 100 is running between switch DSW1 & DSW2
OSPF (Process ID 1) is running between R1, R2, R3, R4
Network of OSPF is redistributed in EIGRP
BGP 65001 is configured on R1 with Webserver cloud AS 65002
HSRP is running between DSW1 & DSW2 switches
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Question:
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating DSWA will not become
the active outer for HSRP group 10.
Configuration on R4 was:
!
ip dhcp exclude 10.2.1.1-10.2.1.253
!
The fault condition is related to which technology?
A. on DSW1 delete ip dhcp exclude 10.2.1.1-10.2.1.253 and apply ip dhcp-excluded 10.2.1.1-
10.2.1.2
B. on DSW2 delete ip dhcp exclude 10.2.1.1-10.2.1.253 and apply ip dhcp-excluded 10.2.1.1-
10.2.1.2
C. on R4 delete ip dhcp exclude 10.2.1.1-10.2.1.253 and apply ip dhcp-excluded 10.2.1.1-10.2.1.2
D. on R4 delete ip dhcp exclude 10.2.1.1-10.2.1.253 and apply ip dhcp-excluded 10.2.1.1-
10.2.1.10
Correct Answer: C
QUESTION 61
Ticket 14: EIGRP Passive Interface
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Trouble Ticket Statement
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Client 1 is not able to reach the WebServer. Initial troubleshooting shows that DSW1 can ping the
Fa0/1 interface of R4 but not the s0/0/0/0.34 interface.
Configuration on DSW1
router eigrp 10
network 10.1.4.4 0.0.0.0
network 10.2.1.1 0.0.0.0
network 10.2.4.13 0.0.0.0
no auto-summary
Configuration on DSW2
router eigrp 10
network 10.1.4.8 0.0.0.0
network 10.2.2.1 0.0.0.0
network 10.2.4.14 0.0.0.0
no auto-summary
Configuration on R4
router eigrp 10
passive-interface default
redistribute ospf 1 route-map OSPF->EIGRP
network 10.1.4.4 0.0.0.3
network 10.1.4.8 0.0.0.3
default-metric 10000 100 255 1 10000
no auto-summary
On which device is the fault condition located?
A. DSW1
B. DSW2
C. Client 1
D. R1
E. R2
F. R3
G. R4
Correct Answer: G
QUESTION 62
Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
Ticket 14: EIGRP Passive Interface
Scenario: The implementation group has been using the test bed to do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several
changes to the network addressing, routing schemes, DHCP services, layer 2 connectivity, FHRP
services, and, device security, a trouble ticket has been opened indicating that Client 1 cannot ping
the 209.65.200.241 address.
Ensurepass.com Members Features:
1. Verified Answers researched by industry experts.
2. Q&As are downloadable in PDF and VCE format.
3. 98% success Guarantee and Money Back Guarantee.
4. Free updates for 180 Days.
View list of All Exam provided:
http://www.ensurepass.com/certfications?index=A
To purchase Lifetime Full Access Membership click here:
http://www.ensurepass.com/user/register
Valid Discount Code for 2014: SFOH-FZA0-7Q2S
To purchase the HOT Exams:
Cisco CompTIA Oracle VMWare IBM
100-101 640-554 220-801 LX0-101 1Z0-051 VCAD510 C2170-011
200-120 640-802 220-802 N10-005 1Z0-052 VCP510 C2180-319
300-206 640-816 BR0-002 SG0-001 1Z0-053 VCP550 C4030-670
300-207 640-822 CAS-001 SG1-001 1Z0-060 VCAC510 C4040-221
300-208 640-864 CLO-001 SK0-002 1Z0-474 VCP5-DCV RedHat
350-018 642-467 ISS-001 SK0-003 1Z0-482 VCP510PSE EX200
352-001 642-813 JK0-010 SY0-101 1Z0-485 EX300
400-101 642-902 JK0-801 SY0-301 1Z0-580
640-461 700-302 1Z0-820