Page 1
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 1/25
CIS 513 Week 11 Final Exam – Strayer New
Click On The Link Below To !rcha"e #$ %ra&e& 'aterial
In"tant (ownloa&
htt)*++,!&a))-net+CIS.513.Final.Exam.Week.11.Strayer.NEW.CIS513W11E-htm
Cha)ter" 5 Thro!/h 0
Cha)ter 5 . Wirele"" er"onal #rea Network"
T2E+F#LSE
1. WPAN technologies are designed to connect devices that are typically up to 10 meters
apart.
2. One of the advantages of WPAN technologies is their conservative use of battery
power.
. !he first step in the "luetooth pairing process is the paging procedure.
#. A reduced$function device can only connect to one full$function device on the
networ%.
&. "luetooth uses a challenge$response strategy for device authentication.
'2LTILE COICE
1. Which of the following is NO! a li%ely application for WPAN technologies'
a. home control
systems
c. industrial control
systems
b. video streaming d. security systems
2. Which of the following is true about WPAN standards'
a. ())) developed
standards for
protocols above
layer 2
c. ())) *02.1&.1 is
the "luetooth
standard
b. industry alliancesdeveloped
d. *02.1+n is the,ig"ee standard
Page 2
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 2/25
specifications for
layers 1 and 2
. Which of the following is true about the O-( model and ())) *02'
a. the P/ is part of
the /ata in% layer
c. the is part of
the Physical layer
b. the PP formats
data received from
the A
d. the A layer is
responsible for
establishing
connectivity to the
local networ%
#. Which radio freuency band does "luetooth use'
a. 2.# 345 (- c. 2.0 345 (-
b. &.0 345 (- d. #.2 345 (-
&. Which of the following is true about the "luetooth protocol stac%'
a. the 2AP sits
between "asebandand 67
c. in% anager
communicatesdirectly with the
Physical 6adio
b. the "aseband layer
sits atop the 67
layer
d. !he 67 layer
communicates
between the in%
anager and
2AP
+. What feature available in some "luetooth devices increases data rates to 2.1 or
bps'
a. in% anager c. 2AP
b. radio module d. )/6
8. Which "luetooth power class allows transmission ranges up to 0 feet'
a. Power lass 1 c. Power lass b. Power lass 2 d. Power lass #
Page 3
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 3/25
*. "luetooth 1.9 uses a variation of which modulation techniue'
a. P-: c. 7-:
b. A-: d. 3-:
;. What feature of "luetooth version .0 uses a separate radio module that transmits
using the same methods as ())) *02.11'
a. ") c. AP
b. <P d. N7
10. Which transmission techniue is used by "luetooth devices'
a. Narrowband c. /4--
b. 74-- d. <W"
11. Which feature of "luetooth version 1.2 allows "luetooth networ%s to coe9ist with
*02.11 networ%s with a minimum of interference'
a. adaptive freuency
hopping
c. alternate
A=P4>
b. freuency hopping
spread spectrum
d. "luetooth low
energy
12. What is created when a "luetooth networ% has one master and at least one slave using
the same channel'
a. scatternet c. piconet
b. wi$fi net d. bluenet
1. 4ow is the master device determined in a "luetooth networ%'
a. the device with the
lowest address
number
c. the first device to
send out an inuiry
message to discover
other devices
b. the device with the d. the device that
Page 4
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 4/25
highest priority hop
seuence on the
piconet
carries out a paging
procedure and
establishes a
connection
1#. Which of the following is NO! a field in a "luetooth frame'
a. Access code c. 4eader
b. 7rame chec%
seuence
d. Payload
1&. Which of the following is NO! a "luetooth error correction scheme'a. 1= rate 7) c. A6?
b. 2= rate 7) d. 6
1+. (n which "luetooth power mode is only the slave device@s internal timer running'
a. active mode c. hold mode
b. sniff mode d. par% mode
18. Which of the following is true about the ,ig"ee standard'
a. designed to support
mesh networ%ing
c. used for larger data
transfers than
"luetooth
b. replaced an e9isting
global open
standard
d. operates in the &.0
and +.& 345 (-
bands
1*. Which layer in a ,ig"ee device is responsible for detecting the presence of an 67
signal in the currently selected channel'
a. c. A
b. P4> d. <pper
1;. Which tas% is the A layer responsible for in an *02.1&.# device'
Page 5
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 5/25
a. turning the radio
transceiver on and
off
c. association and
disassociation
b. analy5ing lin%
uality
d. selecting a
freuency channelfor operation
20. Which type of ,ig"ee device controls the networ% in a star topology'
a. all end$node
devices
c. full$function device
b. reduced function
device
d. PAN coordinator
CO'LETION
1. (n a ,ig"ee tree topology if a child loses it connection with its 77/ it becomes aBnC
DDDDDDDDDDDDD.
2. DDDDDDDDDDDDDDDD is an *02.1&.#$based technology that implements (Pv+ on
WPANs and supports mesh networ%ing.
. A DDDDDDDDDDDDDD authority is a private company that verifies the authenticity of
each user in order to discourage fraud.
#. (n "luetooth )ncryption ode DDDDDD all traffic is encrypted.
&. *02.1&.# provides for DDDDDDDDDDDDDDD integrity a techniue that uses a message
integrity code.
'#TCIN%
a. *$/P-: f. inuiry procedure
b. A lin% g. (
c. A6? h. modulation inde9
d. binding i. seuential freshnesse. guaranteed time E. superframe
Page 6
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 6/25
slots
1. a reserved period for critical devices to transmit priority data
2. a simple method of phase shift %eying that uses eight degrees of phase to encode
tribits
. the process of establishing a relationship between endpoints in a ,ig"ee networ%
#. a security service available in *02.1&.# and used by the receiving device
&. a process that enables a device to discover which devices are in range
+. a pac%et$switched lin% that is used for data transmissions
8. the amount that the freuency varies
*. an error$correction scheme that continuously retransmits until an ac%nowledgment is
received or a timeout value is e9ceeded
;. a mechanism for managing transmissions in a piconet
10. a code composed of a subset of the data the length of the data and the symmetric %ey
SOT #NSWE
1. What are the three types of addresses used in a "luetooth piconet' /escribe each.
2. /escribe the two types of physical lin%s between "luetooth devices.
. What are the two types of networ% access used in ())) *02.1&. networ%s' /escribe
them.
#. ist three of the seven tas%s the *02.1&.# A layer is responsible for.
&. What are the four levels of addresses for identifying devices within a ,ig"ee PAN'
+. What is a cluster tree topology and how do they compare to mesh networ%s'
8. 4ow is power management implemented in a ,ig"ee networ%'
Page 7
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 7/25
*. /escribe the Wireless4A6! technology.
;. ist and describe the three levels of "luetooth security.
10. What is the process that ,ig"ee WPANs use for authentication and encryption'
/escribe how it wor%s.
Cha)ter 4 . i/h.ate Wirele"" er"onal #rea Network"
T2E+F#LSE
1. ())) *02.1& covers all the WPAN wor%ing groups.
2. !he W4/( consortium developed the W4/( specification primarily for the delivery
of data produced from online database ueries.
. !he piconet coordinator in a Wireless4/ networ% should be a battery operated device
for mobility.
#. !he /-P- power saving mode allows devices to sleep for long periods of time until
they choose to wa%e up and listen to a beacon.
&. <W" is capable of handling multiple data streams including 4/ television.
'2LTILE COICE
1. Which ())) standard enables multimedia connectivity between mobile and fi9ed
consumer devices within the home'a. *02.1&.c c. *02.1&.1
b. *02.1&.& d. *02.1&.#
2. (n which freuency range does W4/( operate'
a. 2.# 345 c. & 345
b. *00 45 d. #00 :45
Page 8
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 8/25
. Which of the following is true about Wi3ig'
a. it is compatible
with *02.11ac
c. ma%es use of
technology
designed by
A(ON
b. it reuires layer
and # protocols for
audiovisual support
d. it has adopted the
*02.1&.c standard
for multimedia
distribution
#. What does Wi3ig use to maintain reliable connections at very high freuencies'
a. single$carriermodulation c. O7/
b. beamforming d. protocol adaptation
layers
&. What techniue does Wireless4/ employ to support data rates over 2& 3bps'
a. 6P c. 4/(
b. s patial multiple9ing d. beamforming
+. Which of the following is true about a WFAN piconet'
a. the piconet relies on
an access point
c. large non$mobile
devices li%e !Fs
are not part of a
piconet
b. the PN is typically
a mobile device
such as a tablet
computer
d. the PN is the first
sin% device in the
area
8. Which of the following is described as a piconet that has its own PN but depends on
the original piconet@s PN to allocate a private bloc% of time when its devices are
allowed to transmit'
a. child piconet c. neighbor piconet
b. parent piconet d. subordinate piconet
Page 9
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 9/25
*. Which of the following is NO! an 46 WPAN feature provided by the *02.1&. A
layer'
a. uses a one$octet
device (/
c. data transport
includes ?o-
b. PN can be ueried
about other devices
d. infrastructure mode
networ%ing is
supported
;. Which part of an *02.1&. superframe is used for association and command
communication'
a. contention access period c. channel timeallocation period
b. beacon d. management
channel time
allocation
10. What type of transmission method does an *02.1&. piconet use during the !AP'
a. -/A c. 7/A
b. !/A d. /A
11. Which field of the *02.1&. A frame format is used to reassemble a file in the
correct seuence'
a. 7rame control c. 7ragmentation
control
b. Piconet (/ d. -tream inde9
12. Which *02.1&. power$saving methods allows devices to sleep for the duration of
several superframes and allows them to wa%e up in the middle of a superframe to
transmit or receive data'
a. P-P- c. P-P-
b. AP- d. AP(
1. Which radio band does the *02.1&.c standard use'
Page 10
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 10/25
a. &.0 345 c. 2.# 345
b. +0 345 d. p00 45
1#. 4ow many channels and what is the width of each *02.1&.c channel'
a. # 2 345 c. 11 2& 45
b. + 200 45 d. 1# &0 45
1&. Which of the following is NO! a *02.1&.c P4> layer enhancement'
a. passive scanning c. channel energy
detection b. parity bit error
detection
d. transmit power
control
1+. !he 67 modulation techniues used for *02.1&.c are variations of which of the
following'
a. ?A and P-: c. N6,$ and N6,$(
b. 7-: and A-: d. "P-: and ?P-:
18. (n the Wireless4/ specification 1.1 Which of the following is NO! a function of the
higher protocol layers'
a. video format
selection
c. device discovery
b. cloc%
synchroni5ation
d. video and audio
encoding and
decoding
1*. What application has <W" been used for since the 1;+0@s'
a. video streaming c. cellular phone
towers
b. ground$penetrating
radar
d. automobile speed
detectors
Page 11
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 11/25
1;. What term is used for the techniue in which the amplitude polarity or position of an
analog pulse represents either a 1 or a 0'
a. biphase modulation c. direct$seuence
<W"
b. mesh networ%ing d. impulse modulation
20. What type of attac% on a "luetooth device can access contact lists without the user@s
%nowledge'
a. blueEac%ing c. bluesnarfing
b. bluespoofing d. blue/o-
CO'LETION
1. !he ())) *02.1&.c standard enables DDDDDDDDDDDDDDDD connectivity between
mobile and fi9ed consumer devices within the home.
2. !he W4/( specification is designed to mirror the screens of multiple devices to the
!F screen with the use of DDDDDDDDDDDD.
. DDDDDDDDDDDDDDDDDDDDD uses multiple radios and antennas to steer a signal in the
direction of the receiver.
#. ,ig"ee uses aBnC DDDDDDDDDDDDDDD encryption %ey for networ%$wide
communications.
&. -ecurity for ())) *02.1&. 46 WPANs is based on DDDDDDDDDDDDDDDD a symmetric
%ey encryption mechanism.
'#TCIN%
a. biphase modulation f. isochronous
b. channel time
allocations
g. !A
c. contention access
period
h. PN
Page 12
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 12/25
d. /$WFAN i. spatial multiple9ing
e. 4$WFAN E. superframe
1. periods of time allocated by the PN to a specific device for prioriti5ingcommunications
2. the home or parent WFAN
. time periods used for communication between the devices and the PN
#. a mechanism used to communicate commands or any asynchronous data that may be
present in a superframe
&. a techniue that uses multiple radios and multiple antennas to transmit and receive
different parts of the same P4> frame
+. a time$dependent transmission that must occur every frame or every so many
frames to maintain the uality of the connection
8. a mechanism for managing transmissions in a piconet
*. a device that provides all the basic communications timing in an *02.1&. piconet
;. uses a half$cycle positive analog pulse to represent a 1 and a half$cycle negative
analog pulse to represent a 0
10. a secondary wireless video area networ% that operates in a different freuency channel
SOT #NSWE
1. Provide a summary of the purpose and application for ())) *02.1&.c.
2. ist four potential 46 WPAN applications.
. What was the primary purpose the W4/( consortium developed the W4/(
specification'
#. What do the PAs do for Wi3ig'
&. What are the three sections the Wireless4/ specification divides the P4> layer into'
Page 13
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 13/25
+. /escribe child and neighbor piconets.
8. /escribe the three parts of an *02.1&. superframe.
*. What information is contained in the 7rame control field of an *02.1&. frame'
;. ist and describe the two modes of security for ())) *02.1&. 46 WPANs.
10. "riefly discuss the potential of spectrum conflict with WPANs.
Cha)ter . Low.S)ee& Wirele"" Local #rea Network"
T2E+F#LSE
1. A wireless residential gateway provide better security than connecting a computer
directly to the (nternet.
2. !he range of an AP base station is appro9imately 8& feet in an environment with no
obstructions and little interference.
. When transmitting above 2 bps using /--- in an *02.11b networ% a "ar%er code
is used.
#. !he P4> layer of the *02.11b standard provides functionality for a client to Eoin a
WAN and stay connected.
&. A -(7- occurs immediately after the transmission of frames and no device is allowed
to transmit during the -(7-.
'2LTILE COICE
1. Which of the following is NO! true about wireless N(s'
a. they change the
computer@s internal
data from serial to
parallel before
transmitting
c. they have an
antenna instead of a
cable port
b. you can connect an d. noteboo% computers
Page 14
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 14/25
e9ternal wireless
N( to a <-" port
often use ini P(
cards for wireless
N(s
2. Which component found in an access point is NO! found in a wireless N('
a. radio transmitter c. radio receiver
b. 6G$#& interface d. antenna
. Aside from acting as the base station for the wireless networ% what other function
does an AP perform'
a. it routes pac%ets c. pro9y server
b. acts as a bridge d. it performs as a
firewall
#. Where does an AP that it using Po) get its / power from'
a. an A outlet c. <!P cables
b. a built$in A=/
converter
d. high$freuency
radio waves
&. (f three friends each have a laptop computer and they want to e9change files
wirelessly but nobody has an AP what should they do'
a. use Ad hoc mode c. use the "asic
-ervice -et
b. use infrastructure
mode
d. use the )9tended
-ervice -et
+. What is the term used for when a client finds a different AP that can provide a better$
uality signal and then associates with the new AP'
a. reassociation c. transfer
b. reconnect d. handoff
8. Which of the following is NO! a field in the *02.11b PP frame'
Page 15
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 15/25
a. -tart frame
delimiter
c. -ignal data rate
b. -ource address d. ength
*. Which field of the PP frame indicates how long in microseconds the data portion
of the frame is'
a. -tart frame
delimiter
c. -ervice
b. -ignal data rate d. ength
;. What is the primary Eob of the P/ sublayer'
a. translate binary 1s
and 0s into radio
signals
c. reformat the data
received from the
A layer
b. evaluate the 4eader
error chec% field
d. implement a
channel access
method
10. What is the ma9imum throughput a device can achieve operating on an *02.11bnetwor%'
a. about 11 bps c. about &# bps
b. about &.& bps d. about 28 bps
11. What is the period of time devices must wait after the medium is clear before
attempting to transmit'
a. collision timeframe c. bac%off interval
b. signal data rate d. synchroni5ation
period
12. What is the 6!-=!- protocol designed to reduce or prevent'
a. negative
ac%nowledgements
c. collisions
b. 6 errors d. handsha%es
Page 16
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 16/25
1. With which channel access method does the AP as% each computer if it wants to
transmit'
a. point coordinated
function
c. -A=/
b. -A=A d. virtual carrier
sensing
1#. (n active scanning what does the client do initially to start the association process'
a. poll the access
point
c. send a beacon with
the reuested --(/
b. send a probe frame d. transmit anassociate reuest
frame
1&. What is the last frame sent to successfully conclude a client@s attempt to associate
using active scanning'
a. scan reply c. probe response
b. synchroni5e
ac%nowledgement
d. associate response
1+. Which of the following is true about client@s associating with an AP'
a. an AP can reEect the
reuest based on
the client A
address
c. a client can
reassociate with
another AP in a
"--
b. a client can be
associated to
multiple APs
simultaneously for
fault tolerance
d. if a client is not
preconfigured for a
specific AP it will
not attempt to
associate
18. Which of the following is NO! true about WAN power management'
a. power management
is transparent to
applications
c. the AP uses
timestamps to
maintainsynchroni5ation
Page 17
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 17/25
b. *02.11b devices use
power management
in ad hoc mode
d. the AP %eeps a
record of which
client@s are sleeping
1*. What is the list of devices called that an AP sends in a beacon that indicates which
clients have buffered frames waiting'
a. sleep mode
identifier
c. traffic indication
map
b. buffered frames
allocation
d. pac%et delivery list
1;. Which of the following is a function performed by A management frames'
a. reuest$to$send c. reassociation
reuest
b. transmit data to the
client
d. ac%nowledgement
20. What is the time period during which all devices must wait between transmissions of
data frames'a. -hort (nterframe
-pace
c. (dle 6euirement
Period
b. /7 (nterframe
-pace
d. !ransmission
ontrol Period
CO'LETION
1. (n the place of a port for a cable connection a wireless N( has aBnC DDDDDDDDDDDDDD.
2. An AP acts as aBnC DDDDDDDDDDDD between the wired and wireless networ%s.
. DDDDDDDDDDDDDDDDDDDD mode consists of at least one wireless client connected to a
single AP.
#. Once the DDDDDDDDDDDDD has formatted the frame it passes the frame to the P/sublayer.
Page 18
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 18/25
&. When a client is finishing transmitting it begins listening for aBnC DDDDDDDDDDDDDDDD
from the receiving device.
'#TCIN%
a. A: f. control frames
b. active scanning g. /7
c. associate reuest
frame
h. fragmentation
d. "-- i. management frames
e. channel access
methods
E. passive scanning
1. a WAN mode that consists of at least one wireless client and one AP
2. a frame sent by a client to an AP that contains the client@s capabilities and supported
rates
. A frames that assist in delivering the frames that contain data
#. the process of listening to each available channel for a set period of time
&. the division of data to be transmitted from one large frame into several smaller frames
+. a procedure used to reduce collisions by reuiring the receiving station to send an
e9plicit pac%et bac% to the sending station
8. the default channel access method in ())) *02.11 WANs
*. A frames that are used for e9ample to set up the initial communications between
a client and the AP
;. the process of sending frames to gather information
10. the different ways of sharing resources in a networ% environment
SOT #NSWE
1. What are the four steps involved in wireless N( transmission'
2. /escribe the two basic functions of an AP.
Page 19
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 19/25
Page 20
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 20/25
1. Which of the following *02.11 standards uses <$N(( bands and does not use (-
bands'
a. *02.11b c. *02.11g
b. *02.11a d. *02.11n
2. Which of the <$N(( bands is approved for outdoor use'
a. <$N(($1 c. <$N(($2 )9tended
b. <$N(($2 d. <$N(($
. What is the multiple9ing techniue used by *02.11a to help solve the multipathdistortion problem'
a. ?P-: c. 7)
b. O7/ d. P"
#. 4ow many bits per symbol can be transmitted using 1+$?A'
a. 1+ c. #
b. 2 d. *
&. Which wireless data rate uses +#$level uadrature amplitude modulation transmitting
over #* subcarriers'
a. 11 bps c. 2# bps
b. 2 bps d. &# bps
+. Which layer defines the characteristics of the wireless medium'
a. PP c.
b. P/ d. A
8. Which field in an *02.11a PP frame are used to initiali5e part of the transmitter and
receiver circuits'
a. !ail c. -ervice
Page 21
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 21/25
b. Pad d. Parity
*. What is the disadvantage of an *02.11a WAN compared to an *02.11b WAN'
a. shorter range c. more interference
sources
b. higher error rate d. lower bandwidth
;. 4ow many non$overlapping channels are available in an *02.11g WAN'
a. 2 c.
b. 11 d. *
10. Why is the -(7- time in the *02.11g standard effectively e9tended to 1+
microseconds'
a. for compatibility
with *02.11a
c. to allow *02.11n
devices on the
networ%
b. to account for uiet
time
d. to achieve data rates
higher than 11bps
11. Which of the following is correct about antenna diversity'
a. it is the cornerstone
of the *02.11n
technology
c. it increases
bandwidth while
decreasing range
b. it is two radios and
one antenna
d. it is two antennas
with one radio
12. What do *02.11n devices employ to direct a transmission bac% to the device from
which a frame was received'
a. spatial multiple9ing c. (O
b. beamforming d. antenna diversity
1. What is the ma9imum radio configuration for *02.11n devices'
Page 22
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 22/25
a. transmitters
receivers
c. # transmitters #
receivers
b. + transmitters #
receivers
d. # transmitters
receivers
1#. 4ow much bandwidth do *02.11n devices utili5e when running at speeds up to 00
bps'
a. 20 45 c. #0 45
b. 22 45 d. ## 45
1&. What is the purpose of a guard band'
a. help prevent
adEacent channel
interference
c. helps prevent
outside )
interference
b. help prevent co$
channel interference
d. helps prevent
intersymbol
interference
1+. What *02.11n mode of operation is referred to as greenfield'
a. transmitting in non$
4! mode with
*02.11a=g devices
c. transmitting with
only 4! devices
b. transmitting in
mi9ed 4!=non$4!
devices
d. transmitting at a
faster speed than
receiving
18. Which 4! operation mode is used when one or more non$4! devices are associated
with an 4! AP and supports devices at 20 or #0 45'
a. ode 0 c. ode 2
b. ode 1 d. ode
1*. Which ())) standard supports ?o- and enables prioriti5ation of frames in /7'
a. *02.11f c. *02.11d
b. *02.11e d. *02.11c
Page 23
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 23/25
1;. What *02.11 standard under development uses up to 1+0 45 bandwidth and can
achieve data rates up to 8 3bps'
a. *02.11bg c. *02.11cd
b. *02.11ac d. *02.11ga
20. What type of device can you deploy to allow client WAN connectivity when the
main AP is out of range'
a. bridge c. monitor
b. controller d. router
CO'LETION
1. DDDDDDDDDDDDDDDDDD distortion occurs when the receiving device gets the same
signal from several different directions at different times.
2. !he DDDDDDDDDDDDDDD interval prevents a new symbol from arriving at the receiver
before the last multipath signal reaches the receiver@s antenna.
. AP DDDDDDDDDDDDDDDDDDDDD is a security problem that ta%es advantage of the fact
that clients authenticate with the AP but not vice versa.
#. !he strength of encryption relies on %eeping the DDDDDDDDDD secret as well as its
length.
&. *02.1H uses the )9tensible DDDDDDDDDDDDDDDD Protocol for relaying access reuests between a wireless device the AP and the 6A/(<- server.
'#TCIN%
a. co$channel
interference
f. reduced interframe
space
b. !-$to$self g. spatial multiple9ing
c. guard band h. symbol
Page 24
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 24/25
d. intersymbol
interference
i. !:(P
e. pre$shared %ey E. wireless controller
1. a 12*$bit %ey used by WPA
2. interference between two devices configured to use the same freuency channel
. a change in the signal also %nown as a baud
#. a 2$microsecond interframe space that can be used in *02.11n networ%s
&. the unused freuency space between two adEacent channels
+. a security protocol used in WPA that provides per pac%et %ey$mi9ing
8. a coordination method used by *02.11g devices that prevents *02.11 and *02.11b
devices that do not IunderstandJ O7/ from attempting to initiate a transmission
*. a transmission techniue that uses multiple radios and multiple antennas to send
different parts of the same message simultaneously
;. devices that ma%e it much easier to manage large WANs by implementing most of
the functions of an AP
10. caused when the beginning of a symbol arrives at the receiver antenna while
multipath reflections from the previous symbol are still reaching the antenna
SOT #NSWE
1. What is the <$N(( freuency band and WAN standard uses it'
2. /escribe how *02.11a uses the <$N(($1 <$N(($2 and <$N(($2 e9tended bands.
. What are the two mandatory and two optional transmission modes defined in the
*02.11g P4> layer'
#. What are the three parts of an *02.11a PP frame' /escribe them briefly.
&. /escribe the approach that *02.11n B4!C ta%es to the implementation of the P4>
layer.
Page 25
8/20/2019 CIS 513 Week 11 Final Exam
http://slidepdf.com/reader/full/cis-513-week-11-final-exam 25/25
+. What is (O technology' (nclude beamforming and spatial multiple9ing in your
answer.
8. What is the channel configuration of *02.11n and how does it help achieve higherdata rates'
*. What is the guard interval and what does it help prevent'
;. What are wireless controllers and why are they important in WANs'
10. What is *02.11i and what aspect of WANs does it deal with'