NOTES: Size: Laye rs This Sheet : Scale: Sheet of Title: stringed instrument design liutaio !""!#$http://LiutaioMottola.com Drawn by: Date: Copyright (c)2009 by R.M. Mottola 3. Brace profiles shown ar e rough. More carving may be necessary. 2. The fingerboard tapers from 1/4" thick at the nut end to 3/16" at the 12th fret on the bass side, 7/32'' on the treble side. Taper continues along the entire length. 1. Headstock and fingerboard in the top view are shown as if rotated parallel to the top. 4. Back center reinforcement is 1mm thick. 5. Bridge patch is 0.6mm thick, tapering to zero at the ends. 6. Soundhole reinforcement strips are 1.5mm thick. 7. Cutoff bars are 4.5mm high. Thisplan is made available fornon-commercial use onl y and may not be redistriuted. If thisplan isobtained from any source otherth an LiutaioMo ttola.com it hasbee n copied in vi olatio n ofcopyright. r 30' r 15' 15° 90° 3 16 in 1 4 in 86°
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
8/13/2019 Cincia Tiled
http://slidepdf.com/reader/full/cincia-tiled 1/26
NOTES:
Size: Layers This Sheet:
Scale: Sheet of
Title:
stringed instrument design
liutaio
!""!#$ http://LiutaioMottola.com
Drawn by: Date:
Copyright (c)2009 by R.M. Mottola
3. Brace profiles shown are rough. More
carving may be necessary.
2. The fingerboard tapers from 1/4"thick at the nut end to 3/16" at the 12thfret on the bass side, 7/32'' on the treble side.Taper continues along the entirelength.
1. Headstock and fingerboard in the top vieware shown as if rotated parallel to the top.
4. Back center reinforcement is 1mm thick.
5. Bridge patch is 0.6mm thick, tapering tozero at the ends.
6. Soundhole reinforcement strips are 1.5mmthick.
7. Cutoff bars are 4.5mm high.
Thisplan is made available fornon-commercial use only andmay not be redistriuted. If thisplan isobtained from any sourceotherth an LiutaioMo ttola.com it hasbee n copied in violation of copyright.