C I L I N D R O N I T R O G A SN I T R O G A S C Y L I N D E R
NITROGAS 2
1.- Advertencias• Las operaciones de perforar, esmerilar, etc, quedan
prohibidas. • Cualquier manipulación, mantenimiento o reparación,
etc, debe realizarse únicamente por personal de NITRO-GAS o personas autorizadas expresamente para ello.
• No manipular nunca el cilindro sin descargar com-pletamente, asegurándonos para ello que el vástagoqueda totalmente dentro del cuerpo.
• No se debe dar carga a un cilindro sin verificar queel vástago y el casquillo están en su posición correcta,esto es, en su posición más extendida.
• Siempre se deben utilizar componentes, accesoriosy recambios originales en las reparaciones, manipulacio-nes,etc de cilindros NITROGAS.
• El medio de carga de los cilindros es únicamentegas Nitrógeno comercial
2.- Disminución de la Presión de CilindrosAutónomos• Retirar los tornillos o tapones de seguridad que pro-
tegen la válvula.• Descargar completamente el cilindro purgando la
válvula con las boquillas de descarga BD-M6-113 o BD-1/8-114.
• Verificar que tanto el vástago como el casquilloestán en su posición más extendida, utilizando para elloel extractor roscado ER-01 o ER-02.
• Utilizando el equipo de carga EC-100, realizar unaprecarga inicial de 5 bar observando que el casquillo y eleje siguen en su posición correcta.
• Continuar cargando hasta la presión deseada.• Colocar de nuevo los tornillos o tapones de seguri-
dad que protegen la válvula. • El cilindro esta listo para trabajar.
3.- Aumento de la Presión de Cilindros Autónomos• Retirar los tornillos o tapones de seguridad que pro-
tegen la válvula.• Mediante el equipo de carga EC-100, dar la presión
deseada al cilindro, respetando el límite máximo de carga.• Colocar los tornillos o tapones de seguridad que
protegen la válvula.• El cilindro esta listo para trabajar.
4.- Variación de la presión en Cilindros NoAutónomosLas variaciones de presión se realizan siempre a tra-
vés del Panel de Control (PC), que regula la equipresiónde cilindros colectivos para placas colectoras o pulmo-nes de compensación o cilindros autónomos conexiona-dos entre sí.
Se deben respetar los límites de las presiones de ser-vicio:
• Presión mín: 20 bar.• Presión máx: presiones nominales de carga según
especificaciones de catálogo4.1- Aumento de Presión• Conectar el equipo de carga ED-150 a la válvula de
carga del Panel de Control*.• Llenar de gas el sistema hasta la presión deseada,
observando el manómetro del Panel de Control, respe-tando los límites de carga.
• El sistema esta listo para trabajar.* Válvula de carga: MINIMESS Tipo 1620 (acopla-
miento rápido CEJN)4.2- Disminución de PresiónActuando sobre la válvula de descarga del PC se deja
salir el gas hasta que el manómetro indique la presióndeseada (respetando la Pmín de 20 bar).
NOTA: si por alguna causa el sistema se ha descarga-do completamente, antes de proceder a su llenado esnecesario verificar que los vástagos y los casquillos detodos los cilindros, se encuentran en su posición másextendida, utilizando para ello el extractor roscado ER-01o ER-02.
5.- Comprobación de la Fuerza5.1- Cilindros AutónomosPara este ensayo se utiliza la Prensa de Pruebas P-
117 para verificar de una forma rápida y sencilla la fuerzade los cilindros a gas autónomos de todos los tipos y lon-gitudes de carrera.
La lectura de la fuerza se realiza a través de un manó-metro tras comprimir el cilindro entre 1 y 3 mm
5.2- Cilindros no AutónomosLa comprobación de la fuerza se realiza verificando la
presión del manómetro del Panel de Control. La conver-sión de presión a fuerza se realiza aplicando la siguientefórmula:
FUERZA (daN) = Sección de trabajo (cm2) x Presiónde Carga (bar)
• La garantía que NITROGAS ofrece en todos susproductos (piezas y mano de obra), es aplicable siemprey cuando la utilización sea según las siguientes condicio-nes:
1. El cilindro no muestre desperfectos por golpes,perforaciones, refrentados, etc.
2. Su aplicación y utilización sea dentro de las condi-ciones técnicas especificadas en catálogo e inferior a unaño o cien mil metros lineales.
3. El cilindro no haya sido manipulado.
Instruccio
nes d
e f
uncio
nam
iento -
manip
ula
cio
nes
Instruccio
nes d
e f
uncio
nam
iento -
manip
ula
cio
nes
1.- Warnings• The polishing with emery or drilling are forbidden.• Any manipulation, maintenance or repairs must be
done exclusively by Nitrogas personnel or authorizedtechnicians.
• Only commercial nitrogen gas should be used tocharge up the cylinders.
• Never manipulate the cylinder if it is not totally dis-charged. We will ensure this by introducing the ramtotally in the body of the cylinder.
• Never charge a cylinder without verifying that theram and the guide bushing are in the right position, that isthe most extended position.
• Original components, accessories and spare partsmust be used for repairs, manipulations or installations ofNitrogas’s cylinders.
2.- Disminution of the pressure in autonomouscylinders:• Remove the screws or security caps that protect the
valve.• Totally discharge the cylinder by doing a valve pier-
cing (it will eliminate the air) with the discharge burnersBD-M6-113 or BD-1/8-114.
• Verify that the ram and the guide bushing are in themost extended position by using the extractor ER-01 orER-02.
• Using the charge unit EC-100, make a precharge of5 bar making sure that the guide bushing and the shaftare still in the correct position.
• Continue charging till the desire pressure is reached.• Place again the screws or security caps that protect
the valve.• The cylinder is now ready to work.
3.- Increase of the pressure of autonomouscylinders:• Take out the screws or security caps that protect the
valve.• Give the desired pressure to the cylinder by using
the charging unit EC-100, but always respect the maxi-mum charge limit.
• Place the screws or security caps that protect thevalve.
• The cylinder is ready to work.
4.- Variation of the pressure of non autonomouscylinders:The variations of pressure will always be done by the
Control Panel (PC) that regulates the “equipressure” ofcollective cylinders for manifold plates or autonomouscylinders that are plugged between them.
The service pressure must always be respected:8Minimum pressure: 20 bar
• Maximum pressure: nominal charge pressures asspecified in the catalogue.
4.1- Pressure increase• Plug the charge unit ED-150 to the charge valve of
the Control panel*.• Fill the system with gas till the desire pressure is rea-
ched and always watching the pressure gauge of theControl Panel. Always respect the charge limits.
• The system is ready to work.* Charge valve:MINIMESS Type 1620 (quick connection CEJN)4.2- Pressure decrease:Let the gas get out by operating on the discharge
valve till the pressure gauge reaches the desire pressure.Always keep the minimum pressure of 20 bar.
Note: if for any reason the system has got totally dis-charged, before charging, it again it is necessary to verifythat the rams and the guide bushings are in the mostextended position in all the cylinders by using the coiledextractor ER-01 or ER-02.
5.- Verification of the force5.1- Autonomous Cylinders:For this test the trial press P-117 is used. This measu-
ring tool will verify quickly and easily the force of theautonomous gas cylinders of all types and strokes.
The reading of the force will be made with a pressuregauge after compressing the cylinder between 1 and 4mm.
5.2- Non Autonomous Cylinders:The verification of the force will be made by checking
the pressure of the Control Panel’s pressure gauge. Theconversion of pressure to force will be achieved by appl-ying the following formula:
Force (daN) = Working Section (cm2) x ChargingPressure (bar)
• The guarantee that NITROGAS offers in all its pro-ducts (pieces and labour) is always applicable when theuse is under the following conditions:
1. The cylinder does not show imperfections for hit-ting, drilling, cuts, etc...
2. Its application and use is within the specified tech-nical conditions.
3. The cylinder has not been manipulated.
Main
tenance a
nd u
se d
irectio
ns
Main
tenance a
nd u
se d
irectio
ns
Pre
fa
ce
Pre
fa
ce
Con la edición de este nuevo catálogo 2002,NITROGAS quiere estar una vez más, cerca de susclientes, distribuidores y colaboradores.
Con un ampliado equipo de profesionales señala-damente experimentado en sus productos y aplicacio-nes, NITROGAS trabaja para solucionar sus necesida-des profesionales y empresariales.
NITROGAS ha conseguido el certificado ISO 9002con el nº 52774 a través de Bureau Veritas QualityInternational, S.A., buscando siempre la mejora conti-nua de la calidad y desarrollando productos que pro-porcionan soluciones eficaces. Siguiendo esta colabo-ración, NITROGAS logra la certificación de sus pro-ductos sometidos a la directiva de equipos a presión97/23/CE (marcado CE).
Ante el señalado incremento de su cartera declientes y volumen de su negocio, NITROGAS disponeya de nuevas instalaciones, ampliamente dimensiona-das, con una superficie de mas de 3.000 m2 en elParque Tecnológico de Alava, situado en esta mismalocalidad.
En estas nuevas instalaciones, se dispone de lasmas avanzadas tecnologías, tanto en fabricación comoen logística y almacenaje, así como de un amplio ymoderno parque informático. Todo esto acompañadode sofisticados equipos de ensayos y comprobaciónaseguran la mas alta calidad de nuestro productosaumentando la seguridad y la vida de los mismos.
NITROGAS garantiza una larga vida en sus pro-ductos (1 año ó 100.000 metros lineales).
NITROGAS, además de ampliar su ya importanteCartera de Clientes, sigue siendo proveedor líder de lasgrandes firmas y marcas de Automóvil, tales como:AUDI, DAIMLER CHRYSLER, VOLVO, RENAULT, SEAT,OPEL, BMW. VOLKSWAGEN, FORD, etc...
Se recomienda consultar cilindros fuera de medi-das o especiales.
NITROGAS, siempre buscando la mejora continuade la calidad, se reserva el derecho a modificar lascaracterísticas de sus productos, así como las infor-maciones incluidas en el presente catálogo.
Mit der Ausgabe dieses neuen Kataloges 2002möchte Nitrogas erneut das Ziel verfolgen, noch näheran den Kunden, den Niederlassungen und denMitarbeitern zu stehen. Mit einem nun erweiterten Teaman Spezialisten, das sich langjährig mit den Produktenund Anwendungen bewährt hat, deckt Nitrogas Ihrefachlichen und unternehmerischen Anforderungen ab.
NITROGAS hat die Zertifizierung gemäß ISO 9002,Nr. 52774 von Bureau Veritas Quality International, S.A.erlangt - als Ergebnis einer ständigen Optimierung derQualität und der Entwicklung von Produkten für effi-ziente Lösungen.
Auf Basis dieses Konzeptes hat NITROGAS eben-falls die Zertifizierung ihrer Produkte gemäß derDruckbehälter-Verordnung 97/23/CE
(CE-Kennzeichnung) erreicht. Mit der bedeutenden Vergrösserung des Kundens-
tammes und des Geschäftsumfanges verfügt die FirmaNITROGAS über eine neue Produktionsstätte mit einerFläche von über 3000 m2 im Industriepark von Alava.
Diese neue Einrichtung ist mit den fortschrittlichs-ten Technologien für die Produktion, Logistik, Lager-haltung sowie mit einem modernen Informationsverar-beitungssystem ausgestattet. Dies wird durch hoch-wertige Erprobungs- und Prüfanlagen begleitet, die einhöchstes Mass an Qualität, Sicherheit und Standzeitder Produkte gewährleisten.
NITROGAS garantiert eine lange Standzeit ihrerProdukte (1 Jahr bzw. 100.000 Meter Hubstrecke).
Neben der Belieferung eines gewachsenen Kun-denstammes gehört NITROGAS weiterhin zu einem derführenden Lieferanten der Automobilhersteller und dergrossen Zuliefererunternehmen, u.a. AUDI, DAIMLERCHRYSLER, VOLVO, RENAULT, SEAT, OPEL, BMW,VOLKSWAGEN, FORD usw.
Wir bieten Gasdruckfedern mit Sondermassensowie Anfertigungen für Sonderfunktionen an.
Da NITROGAS stets eine Optimierung der Qualitätanstrebt, behält sie sich das Recht vor, die Eigens-chaften der Produkte sowie die im Katalog aufgeführ-ten Informationen zu modifizieren.
Par l´intermédiaire de l´edition de ce nouveau cata-logue 2002, NITROGAS veut être une fois de plus prèsde ses clients, distributeurs et collaborateurs.
Avec une fantastique équipe de professionnels trèsexpérimentés au niveau des produits et des applica-tions, NITROGAS travaille pour solutionner vos besoinsprofessionnels et industriels.
NITROGAS a obtenu le Certificat ISO-9002–nº52774, par l´intermédiaire du Bureau Veritas QualityInternational, S.A. cherchant toujours l´améliration con-tinue de la qualité et développant les produits quiapportent des solutions efficaces.En continuant cettecollaboration NITROGAS obtene la certification de sesproduits sous la loi d´ensemble a pression 97/23/CE(marque CE).
Suite à l´importante augmentation de sa clientèle etdu volume d´affaire, NITROGAS a ses nouvelles intalla-tions, d´une surface de plus de 3000 m2 dans le ParcTechnologique dÁlava.
Ces nouvelles intallations sont équipées deTechnologies de pointe au niveau de la fabrication, dela logistique et du stockage, ainsi que un grand etmoderme parc infirmatique.Tout ça avec unes sophisti-ques équipements à essai et vérification assurent leplus hauté qualité de nos produits en augmentant leursécurité et leur vie.
Nous garantissons les resorts NITROGAS pour 1anée ou 100.000 metres de course.
NITROGAS en plus délargir son portefeuille declients, déjà très important est toujours le grandes fir-mes et marques d´Automobiles telles que:AUDI, DAIM-LER CHRYSLER, VOLVO,RENAULT, SEAT, OPEL,BMW, VOLKSWAGEN, FORD, etc...
Si vous souhaitez des modèles spéciaux ou modè-les avec de courses diferents consulte-nous.
NITROGAS dans sa recherche de l´améliorationcontinue de la qualité, se réserve le droit de modifier lescaractéristiques de ses produits ainsi que les informa-tions figurant dans le présent catalogue.
Pró
lo
go
Pró
lo
go
Once again NITROGAS hopes to get even closer toits clients, distributors and co-workers with the addi-tion of this new catalogue 2002.
Nitrogas works to resolve both your professionaland business needs with an extensive team of profes-sionals who are highly qualified in their products andapplications.
NITROGAS has been awarded the ISO-9002Certificate, Nº 52774 by the Bureau Veritas QualityInternational, S.A. as a result of always looking of con-tinual improvement in quality and developing productswhich offer efficient solutions.
Continuing with this collaboration, NITROGAS hasachieved the certification of its products by the directi-ve of pressure equipments 97/23/ce (marked CE).
Given the clear increase in its portfolio of clientsand turnover figures, NITROGAS has new spaciouspremises covering an area of more than 3000 m2 inAlava’s Technological Park, located in the same area.
These new installations are equipped with the mostadvanced technology for manufacturing, logistics andstorage as well as with a modern informatics system.
All this accompanied by sophisticated testing andverifying equipments, assure the highest quality of ourproducts by increasing their security and life.
NITROGAS guarantees a long life in its products (1year or 100.000 linear meters).
NITROGAS, in addition to increasing its alreadysignificant customer portfolio, continues to be the lea-ding supplier to major automobile companies andbrands, such as AUDI, DAIMLER CHRYSLER, VOLVO,RENAULT, SEAT, VW, FORD, etc.
It is recommended to enquire about not catalo-gued gas springs ( different sizes) as well as specialones.
NITROGAS, which is always looking for ways tocontinually improve on quality, reserves the right tomodify the specifications of its products as well as theinformation included I this catalogue.
Pro
lo
gu
eP
ro
lo
gu
e
Vo
rw
ort
Vo
rw
ort
NITROGAS 3
NITROGAS 4
I N D
Ø 54
Ø 55
Ø 63
Ø 38
Ø 45
Ø 50
Ø CUERPOØ BODY
Fuerza - ForcedaN
MODELOMODEL
PáginaPage
E-16
Z-100
A-100
G-100
E-24
A-200
G-200
K-200
Z-200
T-420
G-300
K-300
CN-150
M-350
T-700
G-250/6
G-250/7
CN-250
S-300
M-500
K-570
T-1000
G-500
CN-500
S-570
K-750
KF-750
G-750
GA-750
S-750
NF-750
K-1000
KF-1000
M-1000
T-1800
NS-1000
NSB-1000
AX-750
M-1500
K-1500
Ø 16
Ø 19
Ø 20
Ø 22
Ø 24
Ø 25
Ø 32
3,6 ÷ 30,7
23 ÷ 90
25 ÷ 90
100
15,7 ÷ 133
50 ÷ 200
420
100 ÷ 300
150
350
700
250
300
500
570
1000
500
570
750
750
1000
1800
1000
750
1500
97
75
73
11
97
74
12
35
76
61
15
37
83
49
62
13
14
83
103
50
39
63
16
84
104
40
41
18
79
105
117
43
42
52
64
112
114
118
53
44
NITROGAS 5
Ø 110
Ø 70
Ø 75
NS-2000
NSB-2000
W-750
G-1500
GA-1500
S-1500
NF-1500
K-2500
M-2500
T-4700
AX-1500
NS-3000
NSB-3000
NGS-3500
NS-4000
NSB-4000
W-1500
G-3000
GA-3000
NF-3000
K-4000
M-4000
T-7500
AX-3000
NS-5000
NSB-5000
NGS-5000
W-3000
G-5000
GA-5000
NF-5000
M-6500
T-11800
AX-4000
AX-5000
W-5000
CN-7500
G-10000
T-18300
AX-6500
Ø CUERPOØ BODY
Fuerza - ForcedaN
MODELOMODEL
PáginaPage
2000
750
1500
2500
4700
1500
3000
3500
4000
1500
3000
4000
7500
3000
5000
5000
3000
5000
6500
11800
4000
5000
5000
7500
10000
18300
6500
Ø 85
Ø 88
Ø 90
Ø 95
Ø 108
Ø 120
Ø 133
Ø 154
Ø 150
112
114
80
22
79
106
117
45
54
65
118
112
114
111
112
114
80
25
79
117
46
55
66
118
112
114
111
80
28
79
117
56
67
118
118
80
86
31
68
118
Ø 130
I C E
SERIE G
SERIE K-KF
SERIE M
SERIE T-TC
SERIE A-Z
SERIE GA-W
SERIE CN
SERIE E-EL
SERIE SCILINDROS INTERCONECTABLES DE ALTURA REDUCIDA
INTERCONNECTABLE SQUAT GAS CYLINDERS
CILINDROS COLECTIVOS PARA PLACAS COLECTORAS Y CILINDROS CONEXIONADOS
GROUPED CYLINDERS FOR MANIFOLD PLATES AND INTERCONNECTED CYLINDERS
SERIE GENERAL DE CILINDROS STANDARD
GENERAL SERIES OF STANDARD CYLINDERS
CILINDROS COMPACTOS PARA PEQUEÑAS Y GRANDES FUERZAS
COMPACT CYLINDERS FOR LARGE/SMALL FORCES
CILINDROS A GAS DE ALTURA REDUCIDA
SQUAT GAS CYLINDERS
CILINDROS MUY COMPACTOS PARA PEQUEÑAS CARRERAS Y GRANDES FUERZAS
HIGHLY COMPACT CYLINDERS FOR SHORT STROKES AND LARGE FORCES
PEQUEÑOS CILINDROS PARA FUERZAS REDUCIDAS
SMALL CYLINDERS FOR REDUCED FORCES
EXPULSORES A GAS Y DE MUELLE - ELEVADORES A GAS
GAS/SPRING OPERATED EJECTORS - GAS ELEVATORS
GA-CILINDROS CON SISTEMA DE AMORTIGUACIÓNW-CILINDROS CON BAJA COMPRESIÓN
GA-CYLINDERS WITH A DAMPER SYSTEMW-CYLINDERS WITH LOW INCREASE PRESSURE
MANIFOLD
ACCESORIOS
CNOMOComité de Normalisation des Outillages et Machines-Outils
NOVEDAD
G
NITROGAS 10
Les cylindres Nitrogas “Série G” sont autono-mes et indépendants, néanmoins, si on lesouhaite, les modèles G-750, G-1500, G-3000,G-5000 et G-10000 peuvent travailler en étantbranchés entre eux à un tableau de contrôle.
La pression de gaz est variable, permettantainsi à un même cylindre de fournir plusieursforces.
Tous les cylindres sont récupérables.
Moyen de pression NitrogèneVitesse linéaire de la tige � 0,5 m/sTempérature max. de travail +80°C
• Nous recommandons de calculer 10% deréserve de course.
AVERTISSEMENTS
Afin d’éviter des anomalies de fonctionnementet de garantir la sécurité de l’utilisateur, il fau-dra respecter les mesures de précautions sui-vantes:
• La charge des cylindres doit être réaliséeuniquement avec du gaz nitrogène que l’ontrouve dans le commerce.
• L’entretien des cylindres doit être assuré uni-quement par des techniciens spécialisés parNitrogas et par un personnel agréé.
Die Nitrogaszylinder der “Serie G” sind selb-ständig und unabhängig, obwohl, wenn diesgewünscht wird, die Typen G-750, G-1500,G-3000, G-5000 und G-10000 miteinander aneine Steuereinheit verbunden arbeiten können.
Der Fülldruck ist variabel, womit eine Gas-druckfeder mit verschiedenen Druckkräftenausgestattet werden kann.
Alle Gasdruckfedern sind wiederverwendbar.
Druckmittel StickstoffLineare Kolbengeschwindigkeit � 0,5 m/sMax. Arbeitstemperatur +80°C
• Wir empfehlen, eine Reserve in derAusnutzung der Hubstrecke von 10% vorzunehmen.
HINWEISEUm eine unsachgemäße Arbeitsweise zu ver-hindern und um die Sicherheit des Benutzerszu garantieren, sollten die folgenden Vorsichts-maßnahmen eingehalten werden:
• Die Befüllung der Zylinder darf ausschließ-lich nur mit handelsüblichem Stickstoffgasrealisiert werden.
• Die Instandhaltung der Zylinder darf nur vonbei Nitrogas geschulten Technikern oder vonautorisiertem Fachpersonal, durchgeführtwerden.
Los cilindros Nitrogas “Serie G” son autóno-mos e independientes, aunque si se desea, losmodelos G-750, G-1500, G-3000, G-5000 yG-10000 pueden trabajar conexionados entresi a un panel de control.
La presión de gas es variable, permitiendo aun mismo cilindro proporcionar diferentes fuer-zas.
Todos los cilindros son recuperables.
Medio de presión NitrógenoVelocidad lineal de vástago � 0,5 m/sTemperatura máx. de trabajo +80°C
• Recomendamos calcular un 10% de reser-va de carrera.
ADVERTENCIAS
Con el fin de evitar anomalías de funciona-miento y garantizar la seguridad del usuario, sedeberán respetar las siguientes precauciones:
• La carga de los cilindros debe realizarse úni-camente con gas nitrógeno comercial.
• El mantenimiento de los cilindros sólo deberealizarse por técnicos especializados enNitrogas o por personal autorizado.
The G series Nitrogas cylinders are autono-mous and independent, although the G-750,G-1500, G-3000, G-5000 and G-10000 modelscan be connected up to each other through acontrol panel if so desired.
The gas pressure is variable, which allows thesame cylinder to supply different forces.
All of the cylinders are reusable.
Means of pressure NitrogenLineal ram speed � 0,5 m/sec.Max. Working temperature +80°C
• We recommend that 10% of the stroke bekept in reserve.
WARNING
With a view to avoiding operating faults and toguarantee the user’s safety, the following pre-cautions should be observed:
• Only commercial nitrogen gas should beused to charge up the cylinders.
• Cylinder maintenance should only be carriedout by specialised technicians at Nitrogas orby authorised personnel.
NITROGAS 11
MODELO-MODEL
ø22
ø10
L
A
M6
M5 x 5(min.)
CARR
ERA
3
STRO
KE
PATENTE Nº 8.903.555
G-100
MODELOMODEL
Fuerza InicialInitial Force
130 Bar
Fuerza Final MediaMean Final Force
130 Bar
CarreraStrokemm.
A L
100±20 daN
12
25
38
50
63
80
100
125
160
G-100-12
G-100-25
G-100-38
G-100-50
G-100-63
G-100-80
G-100-100
G-100-125
G-100-160
72
85
98
110
123
140
160
185
220
84
110
136
160
186
220
260
310
380
140 daN
NITROGAS 12
Verde - Green
Azul - Blue
Rojo - Red
Amarillo - Yellow
Fuerza InicialInitial Force
daN
Fuerza Final MediaMean Final Force
daN
Presión de cargaLoad pressure
bar
COLORCOLOUR
50
100
150
200
45
90
135
170
75
150
225
300
CarreraStrokemm.
MODELOMODEL A L
G-200-12
G-200-25
G-200-38
G-200-50
G-200-63
*G-200-80
*G-200-100
*G-200-125
12
25
38
50
63
80
100
125
66
79
92
104
117
134
145
170
78
104
130
154
180
214
245
295
MODELO-MODEL
M5 x 5(min.)
STR
OK
E
ø25 L
AC
AR
RE
RA
1
ø12
1.2
3.7
1.2
10
ø23.5
M6
G-200
DIMENSIONES - DIMENSIONS FUERZA - FORCE
PATENTE Nº 8.903.555
BRIDA - FLANGE: XS-200
EJEMPLO DE PEDIDO - ORDER EXAMPLE:
4 G-200-38 rojo/red
OPCIONES DE MONTAJE - ASSEMBLY OPTIONS
5034
30
18
ø25.
3
9
ø7
15
Nota: si no existe especificación, los cilindros se suministrarán concódigo de color amarillo.
Note: If there is not specification then they are supplied with a yellowcolour code.
* Cilindros sin ranura de amarre inferior.* Gas springs without bottom asembly slot.
NITROGAS 13
MODELOMODEL
Fuerza InicialInitial Force
125 Bar
Fuerza Final MediaMean Final Force
125 Bar
CarreraStrokemm.
12
25
38
50
63
80
100
G-250-12-6
G-250-25-6
G-250-38-6
G-250-50-6
G-250-63-6
G-250-80-6
G-250-100-6
A L 65
78
91
103
116
133
153
77
103
129
153
179
213
253
250±20 daN 390 daN
MODELO-MODEL
ø16
M6 x 5(min.)
M38X1,5
10
L
A
8
2
CARR
ERA
7
STRO
KE
SW 50
G-250-6
EJEMPLO DE MONTAJE - EXAMPLE OF ASSEMBLY
PATENTE Nº 8.903.555
NITROGAS 14
MODELO-MODEL
ø16
M6 x 5(min.)
ø38
ø75
50
50.3
29
12
L
ACA
RRER
A
4XM
8 STRO
KE
1
G-250-7
EJEMPLO DE MONTAJE - EXAMPLE OF ASSEMBLY
MODELOMODEL
Fuerza InicialInitial Force
125 Bar
Fuerza Final MediaMean Final Force
125 Bar
CarreraStrokemm.
12
25
38
50
63
80
100
G-250-12-7
G-250-25-7
G-250-38-7
G-250-50-7
G-250-63-7
G-250-80-7
G-250-100-7
A L 63,4
75
88
100
114
130
150
75,4
100
126
150
177
210
250
250±20 daN 390 daN
PATENTE Nº 8.903.555
NITROGAS 15
CarreraStrokemm.
MODELOMODEL A L
G-300-12
G-300-25
G-300-38
G-300-50
G-300-63
G-300-80
G-300-100
12
25
38
50
63
80
100
72
85
98
110
123
140
160
84
110
136
160
186
220
260
Verde - Green
Azul - Blue
Rojo - Red
Amarillo - Yellow
Fuerza InicialInitial Force
daN
Fuerza Final MediaMean Final Force
daN
Presión de cargaLoad pressure
bar
COLORCOLOUR
100
200
250
300
50
100
125
150
140
280
350
420
MODELO-MODEL
ø16
STR
OK
E
L
A
2
CA
RR
ER
A
ø32
101.
63.
61.
6ø30.1
M6 x 5(min.)
M6
G-300
DIMENSIONES - DIMENSIONS FUERZA - FORCE
PATENTE Nº 8.903.555
BRIDA - FLANGE: XS-300 EJEMPLO DE PEDIDO - ORDER EXAMPLE:
5 G-300-12 amarillo/yellow
OPCIONES DE MONTAJE - ASSEMBLY OPTIONS
ø32.
3
6035
940
28
ø7
15
Nota: si no existe especificación, los cilindros se suministrarán concódigo de color amarillo.
Note: If there is not specification then they are supplied with a yellowcolour code.
NITROGAS 16
MODELOMODEL
Fuerza InicialInitial Force
130 Bar
Fuerza Final MediaMean Final Force
130 Bar
CarreraStrokemm.
12
25
38
50
63
80
100
G-500-12
G-500-25
G-500-38
G-500-50
G-500-63
G-500-80
G-500-100
A L 72
85
98
110
123
140
160
84
110
136
160
186
220
260
500±30 daN 750 daN
MODELO-MODEL
M6 x 5(min.)
44 2XM6
ø38
ø45
ø43 L
A
ø20
14.5
CARR
ERA
1
ø22
STRO
KE
R1
G-500PATENTE Nº 8.903.555
7050
70507
ø9
13
50
5021
ø86
ø9
BRIDA - FLANGE: FR-500 BRIDA - FLANGE: XS-500
2113
50 64
5064
ø9
BRIDA - FLANGE: XC-500
NITROGAS 17
MODELO-MODEL
M6 x 5(min.)
ø86
ø65
L
A
ø45
20
CARR
ERA
1
ø22
4xM
8 STRO
KE
G-500-1
MODELOMODEL
Fuerza InicialInitial Force
130 Bar
Fuerza Final MediaMean Final Force
130 Bar
CarreraStrokemm.
12
25
38
50
63
80
100
G-500-12-1
G-500-25-1
G-500-38-1
G-500-50-1
G-500-63-1
G-500-80-1
G-500-100-1
A L 72
85
98
110
123
140
160
84
110
136
160
186
220
260
500±30 daN 750 daN
PATENTE Nº 8.903.555
NITROGAS 18
MODELOMODEL
Fuerza InicialInitial Force
150 Bar
Fuerza Final MediaMean Final Force
150 Bar
CarreraStrokemm.
A L
750±30 daN
G-750-12,7
G-750-25
G-750-38,1
G-750-50
G-750-63,5
G-750-80
G-750-100
G-750-125
G-750-160
G-750-200
G-750-250
G-750-300
12,7
25
38,1
50
63,5
80
100
125
160
200
250
300
107,7
120
133,1
145
158,5
175
195
220
255
295
345
395
120,4
145
171,2
195
222
255
295
345
415
495
595
695
1080 daN
MODELO-MODEL
M8 x 5(min.)
ø25
87
14.5
ø50
ø46,5
2XM8
ø43
L
A
ø20
CARR
ERA
3
STRO
KE
R2
G1 8
ISO 11901 / VDI 3003
G-750
ø9ø9
7556.5
75
56.5
9
20
ø15
ø15
20
12
ø9
75
75
56.5
56.5
13
ø9
56.5
70
56.5
70
13
ø9
56.5
56.5
ø95
BRIDA - FLANGE: GR-750 BRIDA - FLANGE: BF-750 BRIDA - FLANGE: XS-750 BRIDA - FLANGE: XC-750
PATENTE Nº 8.903.555
NITROGAS 19
M8 x 5(min.)
G-750-1
M8 x 5(min.)
M8 x 5(min.)
M8 x
5(min.
)
Carreras, fuerzas y resto de dimensiones como en el modelo G-750
Strokes, forces and other dimensions like the model G-750
G-750-2
G-750-3 G-750-4
MODELO-MODEL
G-750-1-2-3-4PATENTE Nº 8.903.555
NITROGAS 20
MODELO-MODEL
25 50
11
13
11
38
68
78
L
A
N
H
11
5032
3CARRERA
25
22
Ø Ø
Ø Ø
95
32
M8
x 5(
min
.)
STROKE
G1 8
G-750-5
MODELOMODEL
CarreraStrokemm.
AG-750-12,7-5
G-750-25-5
G-750-38,1-5
G-750-50-5
G-750-63,5-5
G-750-80-5
G-750-100-5
G-750-125-5
G-750-160-5
G-750-200-5
G-750-250-5
G-750-300-5
12,7
25
38,1
50
63,5
80
100
125
160
200
250
300
139,7
152
165,1
177
190,5
207
227
252
287
327
377
427
Fuerza InicialInitial Force
150 Bar
Fuerza Final MediaMean Final Force
150 Bar
750±30 daN
H L N136,7
149
162,1
174
187,5
204
224
249
284
324
374
424
152,4
177
203,2
227
254
287
327
377
447
527
627
727
113,2
125,5
138,6
150,5
164
180,5
200,5
225,5
260,5
300,5
350,5
400,5
1080 daN
EJEMPLO PEDIDO - ORDER EXAMPLE:
G-750-100-5
PATENTE Nº 8.903.555
NITROGAS 21
MODELOMODEL
Fuerza InicialInitial Force
150 Bar
Fuerza Final MediaMean Final Force
150 Bar
CarreraStrokemm.
12,7
25
38,1
50
63,5
80
100
G-750-12,7-6
G-750-25-6
G-750-38,1-6
G-750-50-6
G-750-63,5-6
G-750-80-6
G-750-100-6
A L 65,7
78
91,1
103
116,5
133
153
78,4
103
129,2
153
180
213
253
750±30 daN 1080 daN
MODELO-MODEL
ø25
M6 x 5(min.)
M50X1.5
12
L
A
7
1
CARR
ERA
7
STRO
KE
SW 65
G-750-6
EJEMPLO DE MONTAJE - EXAMPLE OF ASSEMBLY
PATENTE Nº 8.903.555
NITROGAS 22
MODELOMODEL
Fuerza InicialInitial Force
150 Bar
Fuerza Final MediaMean Final Force
150 Bar
CarreraStrokemm.
A L
1500±30 daN
G-1500-12,7
G-1500-25
G-1500-38,1
G-1500-50
G-1500-63,5
G-1500-80
G-1500-100
G-1500-125
G-1500-160
G-1500-200
G-1500-250
G-1500-300
12,7
25
38,1
50
63,5
80
100
125
160
200
250
300
122,7
135
148,1
160
173,5
190
210
235
270
310
360
410
135,4
160
186,2
210
237
270
310
360
430
510
610
710
1950 daN
MODELO-MODEL
M8 x 5(min.)
4XM887
ø68
ø75
ø70
L
A
ø40
18
ø36
3
CARR
ERA
STRO
KE
EQUIDISTANT
R2,5
G1 8
G-1500
100
73.5
ø40
100
73.5
20
M8X20
M10X20
16 73.5
ø11
73.5
ø122
16
90
73.5
73.5 90
Ø11
ø11
100
73.5
12 100
73.5
BRIDA - FLANGE: GR-1500 BRIDA - FLANGE: BF-1500 BRIDA - FLANGE: XS-1500 BRIDA - FLANGE: XC-1500
ISO 11901 / VDI 3003PATENTE Nº 8.903.555
NITROGAS 23
G-1500-1
Carreras, fuerzas y resto de dimensiones como en el modelo G-1500
Strokes, forces and other dimensions like the model G-1500
G-1500-2
G-1500-3 G-1500-4
MODELO-MODEL
G-1500-1-2-3-4PATENTE Nº 8.903.555
M8 x 5(min.)
M8 x 5(min.)
M8
x 5(
min.
)
M8 x 5(min.)
NITROGAS 24
MODELOMODEL
CarreraStrokemm.
AG-1500-12,7-5
G-1500-25-5
G-1500-38,1-5
G-1500-50-5
G-1500-63,5-5
G-1500-80-5
G-1500-100-5
G-1500-125-5
G-1500-160-5
G-1500-200-5
G-1500-250-5
G-1500-300-5
12,7
25
38,1
50
63,5
80
100
125
160
200
250
300
162,7
175
188,1
200
213,5
230
250
275
310
350
400
450
Fuerza InicialInitial Force
150 Bar
Fuerza Final MediaMean Final Force
150 Bar
1500±30 daN
H L N159,7
172
185,1
197
210,5
227
247
272
307
347
397
447
175,4
200
226,2
250
277
310
350
400
470
550
650
750
133,2
145,5
158,6
170,5
184,5
200,5
220,5
245,5
280,5
320,5
370,5
420,5
1950 daN
MODELO-MODEL
M8
x 5(
min
.)
36 75
13
19
14
56
98.5
130
108
L
A
N
H
13
7538
3CARRERA
25 40
28
Ø Ø
Ø Ø
STROKE
G1 8
G-1500-5
EJEMPLO PEDIDO - ORDER EXAMPLE:
G-1500-38-5
PATENTE Nº 8.903.555
NITROGAS 25
MODELOMODEL
Fuerza InicialInitial Force
150 Bar
Fuerza Final MediaMean Final Force
150 Bar
CarreraStrokemm.
A L
3000±60 daN
12,7
25
38,1
50
63,5
80
100
125
160
200
250
300
132,7
145
158,1
170
183,5
200
220
245
280
320
370
420
145,4
170
196,2
220
247
280
320
370
440
520
620
720
G-3000-12,7
G-3000-25
G-3000-38,1
G-3000-50
G-3000-63,5
G-3000-80
G-3000-100
G-3000-125
G-3000-160
G-3000-200
G-3000-250
G-3000-300
4500 daN
MODELO-MODEL
M8 x 5(min.)
4XM8
78
ø87
ø95
ø90 L
A
ø60
21
CARR
ERA
ø50
3
STRO
KE
R2,5
EQUIDISTANT
G1 8
G-3000
BRIDA - FLANGE: GR-3000 BRIDA - FLANGE: BF-3000 BRIDA - FLANGE: XS-3000 BRIDA - FLANGE: XC-3000
120
92
20
ø60
120
92
2X20
X20
9218
ø13
92 ø150
18 92
110
92 110
Ø13
ø13
120
92
120
92
12
ISO 11901 / VDI 3003PATENTE Nº 8.903.555
NITROGAS 26
G-3000-1
Carreras, fuerzas y resto de dimensiones como en el modelo G-3000
Strokes, forces and other dimensions like the model G-3000
G-3000-2
G-3000-3 G-3000-4
MODELO-MODEL
G-3000-1-2-3-4PATENTE Nº 8.903.555
M8 x 5(min.)
M8 x 5(min.)
M8
x 5(
min.
)
M8 x 5(min.)
NITROGAS 27
MODELOMODEL
CarreraStrokemm.
AG-3000-12,7-5
G-3000-25-5
G-3000-38,1-5
G-3000-50-5
G-3000-63,5-5
G-3000-80-5
G-3000-100-5
G-3000-125-5
G-3000-160-5
G-3000-200-5
G-3000-250-5
G-3000-300-5
12,7
25
38,1
50
63,5
80
100
125
160
200
250
300
172,7
185
198,1
210
223,5
240
260
285
320
360
410
460
Fuerza InicialInitial Force
150 Bar
Fuerza Final MediaMean Final Force
150 Bar
3000±60 daN
H L N169,7
182
195,1
207
220,5
237
257
282
317
357
407
457
185,4
210
236,2
260
287
320
360
410
480
560
660
760
143,2
155,5
168,6
180,5
194
210,5
230,5
255,5
290,5
330,5
380,5
430,5
4500 daN
MODELO-MODEL
M8
x 5(
min
.)
50 95
13
19
14
66
118.
5
150
128
L
A
N
H
13
9563
3CARRERA
25 40
28
Ø Ø
Ø Ø
STROKE
G1 8
G-3000-5
EJEMPLO PEDIDO - ORDER EXAMPLE:
G-3000-50-5
PATENTE Nº 8.903.555
NITROGAS 28
MODELOMODEL
Fuerza InicialInitial Force
150 Bar
Fuerza Final MediaMean Final Force
150 Bar
CarreraStrokemm.
A L
5000±100 daN
12,7
25
38,1
50
63,5
80
100
125
160
200
250
300
152,7
165
178,1
190
203,5
220
240
265
300
340
390
440
165,4
190
216,2
240
267
300
340
390
460
540
640
740
G-5000-12,7
G-5000-25
G-5000-38,1
G-5000-50
G-5000-63,5
G-5000-80
G-5000-100
G-5000-125
G-5000-160
G-5000-200
G-5000-250
G-5000-300
7500 daN
MODELO-MODEL
M8 x 5(min.)
CA
RR
ERA
78 4XM10
ø112
ø115
ø120
L
A
ø80
22.5
ø65
3
STRO
KE
R2.5
EQUIDISTANT
G1 8
G-5000
BRIDA - FLANGE: GR-5000 BRIDA - FLANGE: BF-5000 BRIDA - FLANGE: XS-5000 BRIDA - FLANGE: XC-5000
ø80
140
109.
5
20 140
109.5
M12X20
M10X20
21
ø13
109.5
ø175
109.
5
21 109.5
130
130
109.
5
Ø13
140
109.
5
14012
109.5
ø13
ISO 11901 / VDI 3003PATENTE Nº 8.903.555
NITROGAS 29
G-5000-1
Carreras, fuerzas y resto de dimensiones como en el modelo G-5000
Strokes, forces and other dimensions like the model G-5000
G-5000-2
G-5000-3 G-5000-4
MODELO-MODEL
G-5000-1-2-3-4PATENTE Nº 8.903.555
M8 x 5(min.)
M8 x 5(min.)
M8
x 5(
min.
)
M8 x 5(min.)
NITROGAS 30
MODELOMODEL
CarreraStrokemm.
AG-5000-12,7-5
G-5000-25-5
G-5000-38,1-5
G-5000-50-5
G-5000-63,5-5
G-5000-80-5
G-5000-100-5
G-5000-125-5
G-5000-160-5
G-5000-200-5
G-5000-250-5
G-5000-300-5
12,7
25
38,1
50
63,5
80
100
125
160
200
250
300
195,7
208
221,1
233
246,5
263
283
308
343
383
433
483
Fuerza InicialInitial Force
150 Bar
Fuerza Final MediaMean Final Force
150 Bar
5000±100 daN
H L N192,7
205
218,1
230
243,5
260
280
305
340
380
430
480
208,4
233
259,2
283
310
343
383
433
503
583
683
783
161,2
173,5
186,6
198,5
212
228,5
248,5
273,5
308,5
348,5
398,5
448,5
7500 daN
MODELO-MODEL
M8 x
5(min.
)65 12
0
17
19
14
79
144
158
L
A
N
H
17
12089
3CARRERA
35 43
28
Ø ØØ Ø
186
STROKE
G1 8
G-5000-5
EJEMPLO PEDIDO - ORDER EXAMPLE:
G-5000-12-5
PATENTE Nº 8.903.555
NITROGAS 31
MODELOMODEL
Fuerza InicialInitial Force
145 Bar
Fuerza Final MediaMean Final Force
145 Bar
CarreraStrokemm.
A L
10000 daN
25
38
50
63
80
100
125
160
200
161
174
186
199
216
236
261
296
336
186
212
236
262
296
336
386
456
536
G-10000-25
G-10000-38
G-10000-50
G-10000-63
G-10000-80
G-10000-100
G-10000-125
G-10000-160
G-10000-200
15500 daN
MODELO-MODEL
M8 x 5(min.)
CARR
ERA
4XM10
ø142
ø150
88
ø145
L
A
ø100
24.5
3
ø95
STRO
KE
EQUIDISTANT
R2.5
G1 8
G-10000
BRIDA - FLANGE: GR-7500 BRIDA - FLANGE: XS-7500 BRIDA - FLANGE: BF-7500
ø100
190
138
20 190
138
M16
M10X20
190
138
190
138
12
ø17.
5
27
ø17.
5
138
ø220
138
PATENTE Nº 8.903.555
K
NITROGAS 34
Il s’agit de la “Série K”, qui est la plus petite de notregamme de cylindres au gaz.
L’une des plus remarquables caractéristiques de cescylindres est la réduction de longueur par rapportaux dimensions standard.
Ces cylindres sont adaptés pour toutes applicationssur des outils ayant des restrictions d’espace.
Les modèles avec trou de chargement latéral G 1/8peuvent travailler interconnectés à un tableau decontrôle.
Le cylindre a été conçu avec des réglages et desguidages flottants qui permettent un alignementparfait et un auto-centrage de la tige.
Nous recommandons une économie de course de10%.
Il est possible de remplacer très rapidement et faci-lement les éléments d’étanchéité usés.
Moyen de pression NitrogèneVitesse linéaire de la tige � 20 m/min.Température max. de travail +80°C
Dans la “Série KF” vous pouvez troubé, en plusde toutes les caractéristiques de la “Série K”,une important réduction de la hauteure descylindres.
Bei der Serie “K” bieten wir die kompaktestenFedern unserer gesamten Produktpalette an. Diebedeutenste Eigenschaft besteht in der wesentli-chen Verkürzung der Bauhöhe gegenüber denstandardisierten Bauabmessungen.
Diese federn finden Anwendung bei äußerst klei-nen Einbauräumen und wenn gleichzeitig einehohe Kraft aufgebracht werden muß.
Die Typen, die seitlich mir einer Füllöffnung miteinem 1/8”-Gewinde versehen sind, können imSchlauchverbund und mit Anschluß an einergemeinsamen Steuereinheit eingesetzt werden.
Die Gasdruckfedern sind mit sogenannten schwe-benden Führungselementen ausgestattet, dieeinen Geradeauslauf bzw. eine Selbstzentrierungder kolbenstange bei der Hubausführung leisten.
Wir empfehleneine Hubreserve in Höhe von 10%bei lhrer Konstruktion vorzusehen.
Bei Verschleiß der Dichtungen nach längeremGebrauch können diese auf schnelle und einfa-che und damit wirtschaftliche Art und Weise aus-getauscht werden.
Füllmittel Stickstoffmax. lineare Hubgeschwindikeit 20 m/min.max. Arbeitstemperatur +80° C
Bei der KF-Typenreihe konnte bei Einhaltungaller Eigenschaften der Typenreihe K einebedeutende Verkürzung der Bauhöhe realisiertwerden.
Es la “Serie K” nuestra gama de cilindros a gasmás pequeña.
Estos cilindros tienen como característica másnotable, la reducción de longitudes con res-pecto a medidas standard.
Adecuado para aplicaciónes en útiles dondeexistan limitaciones de espacio.
Los modelos con orificio de carga lateral G 1/8, pueden trabajar interconexionados a unpanel de control.
El cilindro está diseñado con ajustes y guíasflotantes, que permiten una alineación perfec-ta y autocentrante del vástago.
Recomendamos un ahorro de carrera del 10%.
En caso de desgaste de los elementos deestanqueidad, se puede proceder al recambiode forma rápida y sencilla.
Medio de presión NitrógenoVelocidad lineal de vástago � 20 m/min.Temperatura máx. de trabajo +80°C
En la serie KF podrá encontrar, además detodas las características de la serie K, unaimportante reducción en la altura de los cilin-dros.
This is the “K Series”, our range of mini gascylinders.
The most notable characteristic for these cylin-ders is their reduced length with respect tostandard measurements.
They are suitable for applications where thereis limited space.
The models with side loading apertures G 1/8,can operate interconnencted to a controlpanel.
The cylinder has been designed with floatingguides and settings, which allow the plunger tocentre itself and line up perfectly.
We recommend a 10% reserve on the stroke.
In the event of wear on the sealing elements,these can be replaced quickly and easily.
Means of pressure NitrogenLineal speed of plunger � 20 m/min.Max. Working temperature +80°C
In the KF series you can find, apart from all thecharacteristics of the K series, an importantdecrease in the height of the gas springs.
NITROGAS 35
MODELO-MODEL
1.2
3.7
1.2
10
ø25
L
CARR
ERA
A
ø23.5
1
ø12
M6 x 5(min.)
STRO
KE
MODELOMODEL
CarreraStrokemm.
7
12
16
25
38
50
63
K-200-7
K-200-12
K-200-16
K-200-25
K-200-38
K-200-50
K-200-63
A L39
44
48
57
70
82
95
46
56
64
82
108
132
158
K-200
Fuerza InicialInitial Force
daN
Fuerza Final MediaMean Final Force
daN
50
100
150
200
80
165
250
330
Presión de cargaLoad pressure
bar
45
90
135
170
Verde - Green
Azul - Blue
Rojo - Red
Amarillo - Yellow
COLORCOLOUR
DIMENSIONES - DIMENSIONS
BRIDA - FLANGE: XS-200
EJEMPLO DE PEDIDO - ORDER EXAMPLE:
4 K-200-38 rojo/red
OPCIONES DE MONTAJE - ASSEMBLY OPTIONS
PATENTE Nº 8.903.555
5034
30
18
ø25.
3
9
ø7
15
Nota: si no existe especificación, los cilindros se suministrarán concódigo de color amarillo.
Note: If there is not specification then they are supplied with a yellowcolour code.
FUERZA - FORCE
NITROGAS 36
MODELO-MODEL
25
L
A
16
M8X1.25
1
CARR
ERA
ø
ø12
M6 x 5(min.)
STRO
KE
MODELOMODEL
CarreraStrokemm.
7
12
16
25
38
50
63
K-200-7-8
K-200-12-8
K-200-16-8
K-200-25-8
K-200-38-8
K-200-50-8
K-200-63-8
A L39
44
48
57
70
82
95
46
56
64
82
108
132
158
K-200-8
Fuerza InicialInitial Force
daN
Fuerza Final MediaMean Final Force
daN
50
100
150
200
80
165
250
330
Presión de cargaLoad pressure
bar
45
90
135
170
Verde - Green
Azul - Blue
Rojo - Red
Amarillo - Yellow
COLORCOLOUR
DIMENSIONES - DIMENSIONS
PATENTE Nº 8.903.555
cantidadquantity
modelomodel
colorcolour
carrerastroke
tipotype
2 K-200 - 25 - 8 verde-green
EJEMPLO PEDIDO - ORDER EXAMPLE
EJEMPLO DE MONTAJE - EXAMPLE OF ASSEMBLY
Nota: si no existe especificación, los cilindros sesuministrarán con código de color amarillo.
Note: If there is not specification then they aresupplied with a yellow colour code.
FUERZA - FORCE
K-200-R
Modelo llave
Key model
NITROGAS 37
MODELO-MODEL
M6 x 5(min.)
ø16
101.
63.
61.
6
ø32
L
A
2
ø30.1
CARR
ERA
STRO
KE
MODELOMODEL
CarreraStrokemm.
A LK-300-7
K-300-12
K-300-16
K-300-25
K-300-38
K-300-50
K-300-63
K-300-80
K-300-100
7
12
16
25
38
50
63
80
100
46
51
55
64
77
89
102
119
139
53
63
71
89
115
139
165
199
239
K-300
Verde - Green
Azul - Blue
Rojo - Red
Amarillo - Yellow
Código de colorColour code
Fuerza InicialInitial Force
daN
Presión de cargaPressure
bar
50
100
125
150
Fuerza Final MediaMean Final Force
daN
100
200
250
300
170
340
425
510
DIMENSIONES - DIMENSIONS
PATENTE Nº 8.903.555
BRIDA - FLANGE: XS-300
ø32.
3
6035
940
28
ø7
EJEMPLO DE PEDIDO - ORDER EXAMPLE:
5 K-300-16 amarillo/yellow
OPCIONES DE MONTAJE - ASSEMBLY OPTIONS
15
Nota: si no existe especificación, los cilindros se suministrarán concódigo de color amarillo.
Note: If there is not specification then they are supplied with a yellowcolour code.
FUERZA - FORCE
NITROGAS 38
MODELO-MODEL
M6 x 5(min.)
ø16
ø32
L
A
M12X1.75
19
2
CARR
ERA
STRO
KE
MODELOMODEL
CarreraStrokemm.
A LK-300-7-8
K-300-12-8
K-300-16-8
K-300-25-8
K-300-38-8
K-300-50-8
K-300-63-8
K-300-80-8
7
12
16
25
38
50
63
80
46
51
55
64
77
89
102
119
53
63
71
89
115
139
165
199
K-300-8
Verde - Green
Azul - Blue
Rojo - Red
Amarillo - Yellow
Código de colorColour code
Fuerza InicialInitial Force
daN
Presión de cargaPressure
bar
50
100
125
150
Fuerza Final MediaMean Final Force
daN
100
200
250
300
170
340
425
510
DIMENSIONES - DIMENSIONS
cantidadquantity
modelomodel
colorcolour
carrerastroke
tipotype
4 K-300 - 50 - 8 azul-blue
EJEMPLO PEDIDO - ORDER EXAMPLE
PATENTE Nº 8.903.555
FUERZA - FORCE
EJEMPLO DE MONTAJE - EXAMPLE OF ASSEMBLY
Nota: si no existe especificación, los cilindros sesuministrarán con código de color amarillo.
Note: If there is not specification then they aresupplied with a yellow colour code.
K-300-R
Modelo llave
Key model
NITROGAS 39
MODELOMODEL
Fuerza InicialInitial Force
150 Bar
Fuerza Final MediaMean Final Force
150 Bar
CarreraStrokemm.
12
25
38
50
63
80
100
K-570-12
K-570-25
K-570-38
K-570-50
K-570-63
K-570-80
K-570-100
A L 49
62
75
87
100
117
137
61
87
113
137
163
197
237
570±30 daN 910 daN
MODELO-MODEL
M6 x 5(min.)
10.5
ø38
L
A
1
4.6
ø36
ø22
CARR
ERA
STRO
KE
R1
R1
K-570
15
940
40
ø68
ø7
BRIDA - FLANGE: XS-250
9
ø7
40
52
40 52
BRIDA - FLANGE: XC-250 EJEMPLOS DE MONTAJE - EXAMPLE OF ASSEMBLY
PATENTE Nº 8.903.555
NITROGAS 40
MODELO-MODEL
K-750
MODELOMODEL
Fuerza InicialInitial Force
150 Bar
Fuerza Final MediaMean Final Force
150 Bar
CarreraStrokemm.
12
25
38
50
63
80
100
K-750-12
K-750-25
K-750-38
K-750-50
K-750-63
K-750-80
K-750-100
A L 62
75
88
100
113
130
150
74
100
126
150
176
210
250
750±30 daN 1.230 daN
G
M8 x 5(min.)
STR
OK
E
R1.5
2XM8
ø42
ø45.2
ø39
44
L
A
ø20
14.5
ø25
1
CA
RR
ER
A
1 8
2070
70
50
50-0
.3-0
.2
M8
7050
70507
ø9
50
502113
ø86
ø9
BRIDA - FLANGE: BF-500 BRIDA - FLANGE: FR-500 BRIDA - FLANGE: KS-750
50
502113
64
64
ø9
BRIDA - FLANGE: XC-500
PATENTE Nº 8.903.555
NITROGAS 41
MODELO-MODEL
KF-750PATENTE Nº 8.903.555
MODELOMODEL
Fuerza InicialInitial Force
150 Bar
Fuerza Final MediaMean Final Force
150 Bar
CarreraStrokemm.
11
18
24
37
49
62
79
KF-750-12
KF-750-19
KF-750-25
KF-750-38
KF-750-50
KF-750-63
KF-750-80
A L 45
52
58
71
83
96
113
56
70
82
108
132
158
192
750±30 daN 1300 daN
M6 x 5(min.)
1350 64
50
64
ø9
BRIDA - FLANGE: KS-750 BRIDA - FLANGE: XC-500 EJEMPLOS DE MONTAJE - EXAMPLE OF ASSEMBLY
NITROGAS 42
MODELO-MODEL
KF-1000PATENTE Nº 8.903.555
MODELOMODEL
Fuerza InicialInitial Force
140 Bar
Fuerza Final MediaMean Final Force
140 Bar
CarreraStrokemm.
A L
1000±30 daN 1750 daN
KF-1000-12
KF-1000-19
KF-1000-25
KF-1000-38
KF-1000-50
KF-1000-63
KF-1000-80
KF-1000-100
12
19
25
38
50
63
80
100
50
57
63
76
88
101
118
138
62
76
88
114
138
164
198
238
M6 x 5(min.)
BRIDA - FLANGE: XS-750
70
70
56.5
BRIDA - FLANGE: XC-750 EJEMPLOS DE MONTAJE - EXAMPLE OF ASSEMBLY
NITROGAS 43
MODELOMODEL
Fuerza InicialInitial Force
140 Bar
Fuerza Final MediaMean Final Force
140 Bar
CarreraStrokemm.
12
25
38
50
63
80
100
K-1000-12
K-1000-25
K-1000-38
K-1000-50
K-1000-63
K-1000-80
K-1000-100
A L 62
75
88
100
113
130
150
74
100
126
150
176
210
250
1000±30 daN 1700 daN
MODELO-MODEL
M8 x 5(min.)
STR
OK
E
R2 ø46.5
ø43
ø50.2
85
2XM8
14.5
L
A
1
ø20
CA
RR
ER
A
ø30
G1 8
K-1000
16
70
50
7050
M8
ø9
12
75
56.5
7556.5
56.5ø95
56.5
13 21
ø9
BRIDA - FLANGE: MC-1000 BRIDA - FLANGE: GR-750 BRIDA - FLANGE: XS-750
13
21
56.5
70
56.5 70
ø9
BRIDA - FLANGE: XC-750
PATENTE Nº 8.903.555
NITROGAS 44
MODELO-MODEL
K-1500
MODELOMODEL
Fuerza InicialInitial Force
150 Bar
Fuerza Final MediaMean Final Force
150 Bar
CarreraStrokemm.
12
25
38
50
63
80
100
K-1500-12
K-1500-25
K-1500-38
K-1500-50
K-1500-63
K-1500-80
K-1500-100
A L 72
85
98
110
123
140
160
84
110
136
160
186
220
260
1500 daN 2475 daN
M8 x 5(min.)
2XM8
STR
OK
E
85
ø63
ø56
L
A
ø20
ø36
1C
AR
RE
RA
G1 8
18R2
2090
90
68
68
M10
-0.2
-0.3
12
10073.5
100
73.5
ø13
83
68
8368
ø11
14
25
ø11
14 25
62
108
62
PATENTE Nº 8.903.555
BRIDA - FLANGE: XC-1000 BRIDA - FLANGE: XS-1000 BRIDA - FLANGE: MC-1500 BRIDA - FLANGE: MT-1500
NITROGAS 45
MODELO-MODEL
K-2500
MODELOMODEL
Fuerza InicialInitial Force
155 Bar
Fuerza Final MediaMean Final Force
155 Bar
CarreraStrokemm.
12
25
38
50
63
80
100
K-2500-12
K-2500-25
K-2500-38
K-2500-50
K-2500-63
K-2500-80
K-2500-100
A L 72
85
98
110
123
140
160
84
110
136
160
186
220
260
2500±60 daN 4125 daN
STR
OK
E
R2,5
EQUIDISTANT4XM8
ø70
ø75.2
L
A
ø40
18
ø45
1
CA
RR
ER
A
85 G1 8
ø68
M8x5(min)20
100
100
73.5
73.5
M10
-0.2
-0.3
ø11
12
100
73.5
100
73.5
16 2673
.5
73.5ø122
ø11
16
73.5
26
90
73.5
90
ø11
PATENTE Nº 8.903.555
BRIDA - FLANGE: BF-1500 BRIDA - FLANGE: GR-1500 BRIDA - FLANGE: XS-1500 BRIDA - FLANGE: XC-1500
NITROGAS 46
MODELOMODEL
Fuerza InicialInitial Force
140 Bar
Fuerza Final MediaMean Final Force
140 Bar
CarreraStrokemm.
25
38
50
63
80
100
K-4000-25
K-4000-38
K-4000-50
K-4000-63
K-4000-80
K-4000-100
A L 95
108
120
133
150
170
120
146
170
196
230
270
4000 daN 6800 daN
MODELO-MODEL
M8x5(min)
STR
OK
E
R2.5
85
4XM8 EQUIDISTANT
ø95
ø90
ø87G1 8
L
A
ø60
21
CA
RR
ER
A
ø60
1
K-400020
110
90
110
90
M10
-0.2
-0.3
12
12092
120
92
ø18
92
92
18 30
ø150
ø13
92
18 3011
0
92110
ø13
PATENTE Nº 8.903.555
BRIDA - FLANGE: MC-4000 BRIDA - FLANGE: MT-4000 BRIDA - FLANGE: XS-3000 BRIDA - FLANGE: XC-3000
M
NITROGAS 48
Nitrogas inclut dans ce catalogue la “Série M”qui a été étudiée pour offrir une gamme pluscomplète d’éléments élastiques appliquésdans le domaine du matriçage.
Cette série apporte une force de travail plusélevée dans moins d’espace, avec pour cer-tains modèles, une capacité de connexion auta-bleau de contrôle.
Nous recommandons de calculer 10% deréserve de course.
Moyen de pression NitrogèneVitesse linéaire de la tige � 20 m/min.Température max. de travail +80°C
Nitrogas schließt in diesem Katalog dieTypenreihe “M” ein, die dafür vorgesehen ist,die Palette der Federelemente, die in der Weltder Preß-, Zieh- und Stanztechnik benötigtwerden, noch weiter zu komplettieren.
Diese Typenreihe leistet eine verhältnismäßiggrößere Druckkraft bei geringerem Platzbedarfund bietet, bei einigen Ausführungen, dieMöglichkeit des Anschlusses an ein Ring-leitungssystem mit Steuereinheit an.
Wir empfehlen eine Reserve in der Ausnutzungder Hubstrecke von 10% vorzunehmen.
Druckmittel StickstoffLineare Kolbengeschwindigkeit � 20 m/min.Max. Arbeitstemperatur +80°C
Nitrogas incluye en este catálogo la “Serie M”,que fue pensada para proporcionar una gamamás completa de elementos elásticos aplica-dos al mundo de la troquelería.
Aporta mayor fuerza de trabajo en menosespacio con capacidad de conexión en algu-nos modelos, a panel de control.
Recomendamos calcular un 10% de reservade carrera.
Medio de presión NitrógenoVelocidad lineal de vástago � 20 m/min.Temperatura máx. de trabajo +80°C
Nitrogas has included the “M Series” in thiscatalogue, these were designed to offer a morecomplete range of elastic elements which canbe applied to the world of stamping.
These offer a greater working force in lessspace, some of the models may be connectedto a control panel.
We recommend that 10% of the stroke be keptin reserve.
Means of pressure NitrogenLineal ram speed � 20 m/min.Max. Working temperature +80°C
NITROGAS 49
MODELO-MODEL
M6x5(min)ø18
10.5
M844
ø30
ø27
L
A
ø32
2
CARR
ERA
STRO
KE
R1
M-350
MODELOMODEL
Fuerza InicialInitial Force
140 Bar
Fuerza Final MediaMean Final Force
140 Bar
CarreraStrokemm.
A L
350±30 daN
15
25
38
50
63
80
M-350-15
M-350-25
M-350-38
M-350-50
M-350-63
M-350-80
65
75
88
100
113
130
80
100
126
150
176
210
560 daN
BRIDA - FLANGE: GR-300 BRIDA - FLANGE: XS-150
9 15
ø60
35
35
ø7
735 50
50
35
ø7
PATENTE Nº 8.903.555
NITROGAS 50
MODELO-MODEL
M6x5(min)
M8
ø22
10.5
44
ø36
ø33
L
A
ø38
CARR
ERA
1
STRO
KE
R1
M-500
MODELOMODEL
Fuerza InicialInitial Force
130 Bar
Fuerza Final MediaMean Final Force
130 Bar
CarreraStrokemm.
A L
500±30 daN
15
25
38
50
63
80
M-500-15
M-500-25
M-500-38
M-500-50
M-500-63
M-500-80
70
80
93
105
123
140
85
105
131
155
186
220
800 daN
BRIDA - FLANGE: FR-250 BRIDA - FLANGE: XS-250 BRIDA - FLANGE: XC-250
ø68
40
40
9
15
ø7
9 15
ø7
4052
40 52
40 55
55
40
7
7
PATENTE Nº 8.903.555
NITROGAS 51
MODELO-MODEL
M6x5(min)ø22
10
M38X1.5
L
A
1
CARR
ERA
20
STRO
KE
SW 50
M-500-6
MODELOMODEL
Fuerza InicialInitial Force
130 Bar
Fuerza Final MediaMean Final Force
130 Bar
CarreraStrokemm.
A L
500±30 daN
15
25
38
50
63
80
M-500-15-6
M-500-25-6
M-500-38-6
M-500-50-6
M-500-63-6
M-500-80-6
70
80
93
105
123
140
85
105
131
155
186
220
800 daN
4 M-500
cantidadquantity
25- 6
cantidadquantity
modelomodel
tipotype
carrerastroke
EJEMPLO DE MONTAJE - EXAMPLE OF ASSEMBLY EJEMPLO DE PEDIDO - ORDER EXAMPLE
PATENTE Nº 8.903.555
NITROGAS 52
MODELO-MODEL
M8x5(min)
14.5
2XM8
ø46
ø50
ø43
87
L
A
ø20
ø30
2
CARR
ERA
STRO
KE
R2
G1 8
M-1000
MODELOMODEL
Fuerza InicialInitial Force
140 Bar
Fuerza Final MediaMean Final Force
140 Bar
CarreraStrokemm.
A L
1000±30 daN
25
38
50
63
80
100
125
160
200
M-1000-25
M-1000-38
M-1000-50
M-1000-63
M-1000-80
M-1000-100
M-1000-125
M-1000-160
M-1000-200
110
123
135
148
165
195
220
255
295
135
161
185
211
245
295
345
415
495
1650 daN
16
70
50
7050
M8
PATENTE Nº 8.903.555
12
7556.5
7556.5
ø13
13 2156
.5
56.5ø95
ø9
13
ø9
21
56.5
70
56.5 70
BRIDA - FLANGE: MC-1000 BRIDA - FLANGE: MT-1000 BRIDA - FLANGE: XS-750 BRIDA - FLANGE: XC-750
NITROGAS 53
MODELO-MODEL
M8 x 5(min.)
2XM8
87
ø63
ø56
L
A
20
ø36
2
CARR
ERA
18
R2
ø63
ø56
STRO
KE
G1/8
M-1500
MODELOMODEL
Fuerza InicialInitial Force
150 Bar
Fuerza Final MediaMean Final Force
150 Bar
CarreraStrokemm.
A L
1500±30 daN
25
38
50
63
80
100
125
160
200
M-1500-25
M-1500-38
M-1500-50
M-1500-63
M-1500-80
M-1500-100
M-1500-125
M-1500-160
M-1500-200
110
123
135
148
165
185
220
255
295
135
161
185
211
245
285
345
415
495
2475 daN
12
10073.5
100
73.5
ø13
2090
90
68
68
M10
-0.2
-0.3
PATENTE Nº 8.903.555
ø11
14 25
62
108
62
83
68
8368
ø11
14
25
BRIDA - FLANGE: MC-1500 BRIDA - FLANGE: MT-1500 BRIDA - FLANGE: XS-1000 BRIDA - FLANGE: XC-1000
NITROGAS 54
MODELO-MODEL
M8x5(min)
87
4XM8
ø68
ø75
ø70
L
A
ø40
18
CARR
ERA
ø45
2
STRO
KE
R2.5
EQUIDISTANT
G1 8
M-2500
MODELOMODEL
Fuerza InicialInitial Force
155 Bar
Fuerza Final MediaMean Final Force
155 Bar
CarreraStrokemm.
A L
2500±60 daN
25
38
50
63
80
100
125
160
200
M-2500-25
M-2500-38
M-2500-50
M-2500-63
M-2500-80
M-2500-100
M-2500-125
M-2500-160
M-2500-200
120
133
145
158
175
200
225
265
310
145
171
195
221
255
300
350
425
510
4000 daN
20
90
68
9068
M10
-0.2
-0.3
PATENTE Nº 8.903.555
12
10073.5
100
73.5
ø13
BRIDA - FLANGE: MC-2500 BRIDA - FLANGE: MT-2500 BRIDA - FLANGE: XS-1500 BRIDA - FLANGE: XC-1500
16 2673
.5
73.5ø122
ø11
16
73.5
26
90
73.5
90
ø11
NITROGAS 55
MODELO-MODEL
M8x5(min)
87
4XM8
ø95
ø90
ø87
L
A
ø60
21
CARR
ERA
ø60
2
STRO
KE
R2.5
EQUIDISTANT
G1 8
M-4000
MODELOMODEL
Fuerza InicialInitial Force
140 Bar
Fuerza Final MediaMean Final Force
140 Bar
CarreraStrokemm.
A L
4000±100 daN
25
38
50
63
80
100
125
160
200
M-4000-25
M-4000-38
M-4000-50
M-4000-63
M-4000-80
M-4000-100
M-4000-125
M-4000-160
M-4000-200
130
143
155
173
190
210
245
280
330
155
181
205
236
270
310
370
440
530
6800 daN
PATENTE Nº 8.903.555
20
110
90
110
90
M10
-0.2
-0.3 12
12092
120
92
ø18
BRIDA - FLANGE: MC-4000 BRIDA - FLANGE: MT-4000 BRIDA - FLANGE: XS-3000 BRIDA - FLANGE: XC-3000
92
92
18 30
ø150
ø13
92
18 3011
0
92110
ø13
NITROGAS 56
MODELO-MODEL
M8x5(min)
4XM10
ø120
ø112
ø115
87
L
A
ø80
22.5
CARR
ERA
ø75
2
STRO
KE
R2.5
EQUIDISTANT
G1 8
M-6500
MODELOMODEL
Fuerza InicialInitial Force
145 Bar
Fuerza Final MediaMean Final Force
145 Bar
CarreraStrokemm.
A L
6500±100 daN
25
38
50
63
80
100
125
160
200
140
153
165
178
195
215
250
290
340
165
191
215
241
275
315
375
450
540
M-6500-25
M-6500-38
M-6500-50
M-6500-63
M-6500-80
M-6500-100
M-6500-125
M-6500-160
M-6500-200
10400 daN
20
125
100
125
100
M10
-0.2
-0.3
PATENTE Nº 8.903.555
12
140109.5
140
109.
5
ø18
BRIDA - FLANGE: MC-6500 BRIDA - FLANGE: MT-6500 BRIDA - FLANGE: XS-5000 BRIDA - FLANGE: XC-5000
21 3310
9.5
109.5
ø175
ø13
21 3310
9.5
130
109.5130
ø13
NITROGAS 57
MODELO-MODEL
M8x5(min)
E
CARR
ERA
LA
H
B
F 2
D
STRO
KE
Nº agujerosNo of Holes
M-1000-1 M-1500-1 M-2500-1M-4000-1 M-6500-1
AMODELOMODEL
CarreraStrokemm.
L B D E FM-1000-25-1
M-1000-38-1
M-1000-50-1
M-1000-63-1
M-1000-80-1
M-1000-100-1
M-1000-125-1
M-1000-160-1
M-1000-200-1
M-1500-25-1
M-1500-38-1
M-1500-50-1
M-1500-63-1
M-1500-80-1
M-1500-100-1
M-1500-125-1
M-1500-160-1
M-1500-200-1
M-2500-25-1
M-2500-38-1
M-2500-50-1
M-2500-63-1
M-2500-80-1
M-2500-100-1
M-2500-125-1
M-2500-160-1
M-2500-200-1
M-4000-25-1
M-4000-38-1
M-4000-50-1
M-4000-63-1
M-4000-80-1
M-4000-100-1
M-4000-125-1
M-4000-160-1
M-4000-200-1
M-6500-25-1
M-6500-38-1
M-6500-50-1
M-6500-63-1
M-6500-80-1
M-6500-100-1
M-6500-125-1
M-6500-160-1
M-6500-200-1
25
38
50
63
80
100
125
160
200
25
38
50
63
80
100
125
160
200
25
38
50
63
80
100
125
160
200
25
38
50
63
80
100
125
160
200
25
38
50
63
80
100
125
160
200
110
123
135
148
165
195
220
255
295
110
123
135
148
165
185
220
255
295
120
133
145
158
175
200
225
265
310
130
143
155
173
190
210
245
280
330
140
153
165
178
195
215
250
290
340
135
161
185
211
245
295
345
415
495
135
161
185
211
245
285
345
415
495
145
171
195
221
255
300
350
425
510
155
181
205
236
270
310
370
440
530
165
191
215
241
275
315
375
450
540
50
63
75
95
120
30
36
45
60
75
100
125
125
145
170
25
25
25
25
35
HMODELOMODEL
M-1000-1
M-1500-1
M-2500-1
M-4000-1
M-6500-1
75
100
100
120
145
4 x M10
6 x M10
6 x M10
8 x M10
8 x M10
Nº agujerosNo. of holes
PATENTE Nº 8.903.555
T
NITROGAS 60
La “Série T” est un cylindre super compact,idéal pour les petits déplacements et pour lesforces plus grandes, avec une pression maxi-mum au contact.
Son utilisation doit se limiter aux petites cour-ses de travail qui ont des déplacements lentsde la tige. Cela évite une surchauffe du cylindrequi entraîne una usure prématurée des jointsde fermeture.
Nous conseillons de prévoir une économie decourse d’au moins 10%.
Moyen de pression NitrogèneEn ce qui concerne les vitesses de travail, renseignez-vousaprès du fabricant. Température max. de travail +80°C
Dans la “Série TC” vous pouvez troubé, en plusde toutes les caractéristiques de la “Série T”, laposibilité de connecter plusieres cilindres ápart soi.
Die “Serie T” ist ein besonders kompakterZylinder, geeignet für kleine Hubstrecken undgroßen Kräften mit maximalem Druck schonam Anfang der Hubstrecke.
Sein Gebrauch sollte beschränkt werden aufkurze Hublängen und niedrige Kolbenge-schwindigkeiten. Dies verhindert eine Über-hit-zung des Zylinders, was einen vorzeitigenVerschleiß der Schließdichtungen mit sich brin-gen würde.
Wir empfehlen eine Reserve in der Ausnutzungder Hubstrecke von 10% vorzunehmen.
Druckmittel StickstoffBezüglich der mögl. Hubgeschwindigkeiten bitten wir beimHersteller anzufragenMax. Arbeitstemperatur +80°C
Bei der TC-Typenreihe verfügen Sie über dieMöglichkeit, bei Einhaltung aller Eigenschaftender Typenreihe T die Gasdruckfedern mittelsSchlauchverbinder untereinander zu verbin-den.
La “Serie T”, es un cilindro super-compacto,idóneo para desplazamientos pequeños yfuerzas muy grandes, con una presión máximaal contacto.
Su utilización debe limitarse a carreras de tra-bajo pequeñas y con desplazamientos de vás-tago lentos. Ello evita un sobrecalentamientodel cilindro, lo que conlleva a un desgaste pre-maturo de las juntas de cierre.
Recomendamos preveer un ahorro de carrerade al menos un 10%.
Medio de presión NitrógenoPara velocidades de trabajoconsultar fabricante.Temperatura máx. trabajo +80°C
En la serie TC podrá encontrar, además detodas las características de la serie T, la posi-bilidad de conexionar varios cilindros entre sí.
The T series is a super-compact cylinder, idealfor small movements and very strong forceswith a maximum contact pressure.
Its use should be limited to small work lineswith slow ram movements. This will stop thecylinder from overheating, which could causepremature wear of the sealing joints.
We recommend that at least 10% of the strokebe kept in reserve.
Means of pressure NitrogenPlease refer to the manufacturer for working speedMax. Working temperature +80°C
In the TC series you can find, apart from all thecharacteristics of the T series, the possibility ofconnecting the gas springs between them.
NITROGAS 61
MODELO-MODEL
min
STR
OK
EA
L
12
M6
ø25.2
T-420
MODELOMODEL
Fuerza InicialInitial Force
135 Bar
Fuerza Final MediaMean Final Force
135 Bar
CarreraStrokemm.
A L
420 daN
6
10
16
25
T-420-6
T-420-10
T-420-16
T-420-25
50
60
75
95
56
70
91
120
710 daN
EJEMPLO DE MONTAJE - EXAMPLE OF ASSEMBLY
EJEMPLO PEDIDO - ORDER EXAMPLE:
3 T-420-6
• Reserva mínima de carrera: 10%
• Minimun stroke reserve: 10%
PATENTE Nº 8.903.555
NITROGAS 62
MODELO-MODEL
2XM6
ø15
ø32.2
STRO
KEA
L
10.5
ø18
M6
R.1
min
T-700
MODELOMODEL
Fuerza InicialInitial Force
145 Bar
Fuerza Final MediaMean Final Force
145 Bar
CarreraStrokemm.
A L10
15
25
T-700-10
T-700-15
T-700-25
70
85
110
80
100
135
700 daN 1155 daN
EJEMPLO DE MONTAJE - EXAMPLE OF ASSEMBLY
EJEMPLO PEDIDO - ORDER EXAMPLE:
4 T-700-15BRIDA - FLANGE: XS-150
9
35 ø60
35
ø7
A - 6
m/m
• Reserva mínima de carrera: 10%
• Minimun stroke reserve: 10%
PATENTE Nº 8.903.555
NITROGAS 63
MODELO-MODEL
STRO
KE
2XM6
10.5
10.5
ø38.1
ø17
L
A
ø18
min
R1
M6
T-1000
MODELOMODEL
Fuerza InicialInitial Force
150 Bar
Fuerza Final MediaMean Final Force
150 Bar
CarreraStrokemm.
A L
1000 daN
6
10
15
25
38
50
T-1000-6
T-1000-10
T-1000-15
T-1000-25
T-1000-38
T-1000-50
55
70
85
110
133
180
61
80
100
135
171
230
1650 daN
EJEMPLO DE MONTAJE - EXAMPLE OF ASSEMBLY
EJEMPLO PEDIDO - ORDER EXAMPLE:
2 T-1000-10BRIDA - FLANGE: XS-250 BRIDA - FLANGE: XC-250
9
40
ø68
40
ø7
15
A - 6
m/m
• Reserva mínima de carrera: 10%
• Minimun stroke reserve: 10%
PATENTE Nº 8.903.555
9
ø7
40
52
40 52
NITROGAS 64
MODELO-MODEL
STRO
KE
14.5
14.5
2XM8
ø50.1
ø20
L
A
ø30
min
R2
M6
T-1800
MODELOMODEL
Fuerza InicialInitial Force
145 Bar
Fuerza Final MediaMean Final Force
145 Bar
CarreraStrokemm.
A L
1800 daN
6
10
15
25
38
50
T-1800-6
T-1800-10
T-1800-15
T-1800-25
T-1800-38
T-1800-50
60
70
91
110
133
170
66
80
106
135
171
220
2900 daN
EJEMPLO PEDIDO - ORDER EXAMPLE:
4 T-1800-25BRIDA - FLANGE: XS-750
EJEMPLO DE MONTAJE - EXAMPLE OF ASSEMBLY
13ø9
5
56.5
56.5
ø9
BRIDA - FLANGE: XC-750
70
70
56.5
21
A - 8
m/m
• Reserva mínima de carrera: 10%
• Minimun stroke reserve: 10%
PATENTE Nº 8.903.555
NITROGAS 65
MODELO-MODEL
4XM8
ø75.1
STRO
KE
L
A
1818
ø40
ø45
min
R2.5
EQUIDISTANTM6
T-4700
MODELOMODEL
Fuerza InicialInitial Force
150 Bar
Fuerza Final MediaMean Final Force
150 Bar
CarreraStrokemm.
A L
4700 daN
10
15
25
38
50
T-4700-10
T-4700-15
T-4700-25
T-4700-38
T-4700-50
70
91
110
133
190
80
106
135
171
240
7500 daN
EJEMPLO PEDIDO - ORDER EXAMPLE:
4 T-4700-38BRIDA - FLANGE: XS-1500
16
73.5
ø122
73.5
ø11
BRIDA - FLANGE: XC-1500
90
73.5
73.5 90
Ø11
16
• Reserva mínima de carrera: 10%
• Minimun stroke reserve: 10%
PATENTE Nº 8.903.555
EJEMPLO DE MONTAJE - EXAMPLE OF ASSEMBLY
26
A - 1
0m
/m
NITROGAS 66
MODELO-MODEL
4XM8
ø95.1
STRO
KE
LA
21
ø60
21
ø65
min
R2.5
M6 EQUIDISTANT
T-7500
MODELOMODEL
Fuerza InicialInitial Force
150 Bar
Fuerza Final MediaMean Final Force
150 Bar
CarreraStrokemm.
A L
7500 daN
10
15
25
38
T-7500-10
T-7500-15
T-7500-25
T-7500-38
80
101
120
143
90
116
145
181
11600 daN
EJEMPLO PEDIDO - ORDER EXAMPLE:
3 T-7500-10BRIDA - FLANGE: XS-3000
18
92
ø15092
ø13
BRIDA - FLANGE: XC-3000
92
110
92 110
Ø13
18
• Reserva mínima de carrera: 10%
• Minimun stroke reserve: 10%
PATENTE Nº 8.903.555
EJEMPLO DE MONTAJE - EXAMPLE OF ASSEMBLY
30
A - 1
2m
/m
NITROGAS 67
MODELO-MODEL
STRO
KE
4XM10
ø120.1
22.5
L
A
22.5
ø80
ø75
R2.5
EQUIDISTANT
min
M6
T-11800
MODELOMODEL
Fuerza InicialInitial Force
150 Bar
Fuerza Final MediaMean Final Force
150 Bar
CarreraStrokemm.
A L
11800 daN
10
15
25
38
T-11800-10
T-11800-15
T-11800-25
T-11800-38
90
111
130
150
100
126
155
188
17100 daN
EJEMPLO PEDIDO - ORDER EXAMPLE:
4 T-11800-10BRIDA - FLANGE: XS-5000
PATENTE Nº 8.903.555
21
109.5
ø175
109.
5
ø13
BRIDA - FLANGE: XC-5000
109.5
130
130
109.
5
Ø13
21 • Reserva mínima de carrera: 10%
• Minimun stroke reserve: 10%
EJEMPLO DE MONTAJE - EXAMPLE OF ASSEMBLY
33
A - 1
2m
/m
NITROGAS 68
MODELO-MODEL
4XM10
ø150
STRO
KE
L
24.5
24.5
A
ø90
ø95
EQUIDISTANT
min
R2.5
M6
T-18300
MODELOMODEL
Fuerza InicialInitial Force
150 Bar
Fuerza Final MediaMean Final Force
150 Bar
CarreraStrokemm.
A L10
15
25
T-18300-10
T-18300-15
T-18300-25
100
121
140
110
136
165
18300 daN 27400 daN
EJEMPLO PEDIDO - ORDER EXAMPLE:
2 T-18300-15BRIDA - FLANGE: XS-18300
PATENTE Nº 8.903.555
27
138
ø220
138
ø17.5
• Reserva mínima de carrera: 10%
• Minimun stroke reserve: 10%
EJEMPLO DE MONTAJE - EXAMPLE OF ASSEMBLY
38
A - 1
1m
/m
NITROGAS 69
MODELO-MODEL
TCPATENTE Nº 8.903.555
MODELOMODEL MET
TC-1000
TC-1800
TC-4700
TC-7500
TC-11800
–
2 x M8
4 x M8
4 x M8
4 x M10
H–
26
40
60
80
MODELOMODEL
Fuerza InicialInitial Force
daN
CarreraStrokemm.
A L
1000
1800
4700
7500
11800
TC-1000-6
TC-1000-10
TC-1000-15
TC-1000-25
TC-1000-38
TC-1000-50
TC-1800-6
TC-1800-10
TC-1800-15
TC-1800-25
TC-1800-38
TC-1800-50
TC-4700-10
TC-4700-15
TC-4700-25
TC-4700-38
TC-4700-50
TC-7500-10
TC-7500-15
TC-7500-25
TC-7500-38
TC-11800-10
TC-11800-15
TC-11800-25
TC-11800-38
6
10
15
25
38
50
6
10
15
25
38
50
10
15
25
38
50
10
15
25
38
10
15
25
38
B D E F G75
90
105
130
153
200
80
90
111
130
153
190
90
111
130
153
210
100
121
140
163
110
131
150
170
81
100
120
155
191
250
86
100
126
155
191
240
100
126
155
191
260
110
136
165
201
120
146
175
208
38,1
50,1
75,1
95,1
120,1
18
30
45
65
75
32
43
68
87
112
4
8
8
8
8
4
7
7
7
7
Cilindros compactos de la serie T adaptados para ser intercone-xionados entre sí a panel de control mediante la adaptación de untapón en el fondo del cuerpo. Utilizar para la conexión racores tipoRM y latiguillo tipo LM.
Todos los modelos excepto el modelo T-1000 disponen de válvulade llenado.
Reserva mínima de carrera: 10%
T series compact cylinders adapted so as to be interconnected toa Control Panel by means of adjusting a plug on the bottom of thebody. Used with RM type connections and LM type hosing.
All models, excep the T-1000 model, have a filling valve.
Minimum stroke reserve: 10%
A-Z
NITROGAS 72
Pequeños cilindros recuperables para fuerzasreducidas que presentamos en dos diámetrosy que operan típicamente como autónomos.
Recomendamos calcular un 10% de reservade carrera.
SERIE A
Pequeños cilindros recuperables para fuerzasreducidas. Las diferentes fuerzas están identi-ficadas mediante códigos de color.
Recomendamos calcular un 10% de reservade carrera.
SERIE Z
Small serviceable cylinders for lower forces,which we present in two diameters and whichtypically operate autonomously.
We recommend that 10% of the stroke be keptin reserve.
RANGE A
Small serviceable cylinders for applied forces.The various forces are shown by means ofcolour coding.
We recommend that 10% of the stroke be keptin reserve.
RANGE Z
Kleine, wiederverwendbare Gasdruckfedern fürniedrige Druckkräfte, die wir in zwei unterschied-lichen Körperdurchmessern anbieten und die aufkonventionelle Art und Weise selbständig einge-setzt werden.
Wir empfehlen, eine Reserve in der Ausnutzungder Hubstrecke von 10% vorzunehmen.
SERIE A
Kleine, wiederverwendbare Gasdruckfedern fürniedrige Druckkräfte. Die verschiedenenDruckkräfte werden mittels einer Farbkodierungunterschieden.
Wir empfehlen, eine Reserve in der Ausnutzungder Hubstrecke von 10% vorzunehmen.
SERIE Z
Petits cylindres récupérables pour forcesréduites que nous présentons en deux diamè-tres et qui opèrent en toute autonomie.
Nous recommandons de calculer 10% deréserve de course.
SÉRIE A
Petits cylindres récupérables pour forces. Lesdifférentes forces sont identifiées à l’aide decodes en couleur.
Nous recommandons de calculer 10% deréserve de course.
SÉRIE Z
3.5
3
M6
ø15
ø8
L
A
1
ø20
CARR
ERA
STRO
KE
CarreraStrokemm.
MODELOMODEL A L COLOR
COLOUR
A-100-10
A-100-12,7
A-100-16
A-100-25
A-100-38
A-100-50
A-100-63
A-100-80
10
12,7
16
25
38
50
63
80
64
66,7
70
79
92
104
117
134
74
79,4
86
104
130
154
180
214
Verde - Green
Azul - Blue
Rojo - Red
Amarillo - Yellow
Fuerza Final MediaMean Final Force
daN
Fuerza InicialInitial Force
daN
25
50
75
90
33
67
101
121
Presión de cargaLoad pressure
bar
50
100
150
170134
18
21
154
180
214
0
4
0
50
75
50
33
67
Final MediaFinal ForcedaN
33
PresLoa
ediaorce
Presión dLoad pre
bar
sión de cargaad pressure
63
80
63
80
92
104
79
92
104
79
86
104
74
79,4
86
4
IniFuerza IniInitial For
daN
uerza Inicianitial Force
daN
FueMea
za Inicialal Force
ø15
M6
NITROGAS 73
MODELO-MODEL
A-100
DIMENSIONES - DIMENSIONS FUERZA - FORCE
EJEMPLOS DE MONTAJE - EXAMPLE OF ASSEMBLY
36
6 36
24
24
ø6.5
PATENTE Nº 8.903.555
BRIDA - FLANGE: GR-100
CarreraStrokemm.
MODELOMODEL A L
A-200-10
A-200-12,7
A-200-16
A-200-25
A-200-38
A-200-50
A-200-63
*A-200-80
10
12,7
16
25
38
50
63
80
55
57,7
61
70
83,2
95
109
125
65
70,4
77
95
121,2
145
172
205
COLORCOLOUR
Verde - Green
Azul - Blue
Rojo - Red
Amarillo - Yellow
Fuerza Final MediaMean Final Force
daN
Fuerza InicialInitial Force
daN
50
100
150
200
80
165
250
330
Presión de cargaLoad pressure
bar
45
90
135
170
M6x5(min)
ø12
10.5
L
A
M6
ø25
5
1
CARR
ERA
STRO
KE
R1
125
109
125
2 12
14
17
20
95
121,2
145
172
5
1,22
10
50
Fuerza Final MMean Final F
daN
cialrce
80
Final MediaFinal ForcedaN
PresLoa
edia Presión d
-80
50
63
80
38
50
63
61
70
83,
57,7
61
70
65
70
77
L 65
70 4
FueIni
Fuerza IniInitial For
5
M6
R1
A
R1
A
L
A
L
NITROGAS 74
MODELO-MODEL
A-200
DIMENSIONES - DIMENSIONS FUERZA - FORCE
2 A-200
cantidadquantity
50- azul-blue
cantidadquantity
modelomodel
colorcolour
carrerastroke
EJEMPLO DE MONTAJE - EXAMPLE OF ASSEMBLY EJEMPLO PEDIDO - ORDER EXAMPLE
PATENTE Nº 8.903.555
Nota: si no existe especificación, los cilindros se sumi-nistrarán con código de color amarillo.
Note: If there is not specification then they are suppliedwith a yellow colour code.
* Cilindro sin ranura de amarre interior.* Gas spring without bottom asembly slot.
NITROGAS 75
MODELOMODEL LZ-100-7
Z-100-15
Z-100-25
Z-100-38
Z-100-50
Z-100-63
Z-100-80
7
15
25
38
50
63
80
49
57
67
80
92
105
125
56
72
92
118
142
168
205
Verde - Green
Azul - Blue
Rojo - Red
Amarillo - Yellow
COLORCOLOUR
23
45
68
90
CarreraStrokemm.
A 31
61
92
121
Fuerza Final MediaMean Final Force
daN
Fuerza InicialInitial Force
daN
Presión de cargaLoad pressure
bar
45
90
135
170
MODELO-MODEL
M6
ø 8
L
A
ø19
1
CARR
ERA
STRO
KE
Z-100
DIMENSIONES - DIMENSIONS FUERZA - FORCE
6 Z-100
cantidadquantity
15- rojo-red
cantidadquantity
modelomodel
colorcolour
carrerastroke
EJEMPLO DE MONTAJE - EXAMPLE OF ASSEMBLY EJEMPLO PEDIDO - ORDER EXAMPLE
PATENTE Nº 8.903.555
Nota: si no existe especificación, los cilindros se sumi-nistrarán con código de color amarillo.
Note: If there is not specification then they are suppliedwith a yellow colour code.
Cilindro según normas VDI.Gas springs under VDI standard.
NITROGAS 76
MODELO-MODEL
M6 x 5(min.)
ø12
14.5
1.2 L
A
1
M6
ø25
CARR
ERA
STRO
KE
Z-200
MODELOMODEL L
Z-200-7
Z-200-15
Z-200-25
Z-200-38
Z-200-50
Z-200-63
Z-200-80
Z-200-100
Z-200-125
7
15
25
38
50
63
80
100
125
49
57
67
80
92
105
125
145
170
56
72
92
118
142
168
205
245
295
CarreraStrokemm.
AVerde - Green
Azul - Blue
Rojo - Red
Amarillo - Yellow
COLORCOLOUR
50
100
150
200
80
165
250
330
Fuerza Final MediaMean Final Force
daN
Fuerza InicialInitial Force
daN
Presión de cargaLoad pressure
bar
45
90
135
170
DIMENSIONES - DIMENSIONS FUERZA - FORCE
BRIDA - FLANGE: XS-200
19.5
EJEMPLO DE MONTAJE - EXAMPLE OF ASSEMBLY
PATENTE Nº 8.903.555
5034
30
18
ø25.
3
9
ø7
Nota: Se dispone también de este modelo con válvula de carga en el cuerpo según norma VDI.Note: We also have this model with the charge valve on the body by the VDI standard.
NITROGAS 77
GA
-W
NITROGAS 78
El cilindro amortiguado GA incluye un disposi-tivo de control interno que permite una lentarecuperación del vástago regulada a la veloci-dad que desee.
Recomendamos una reserva de carrera del10%.
Velocidad de trabajo: 8-12 golpes/min.
SERIE GA
Cilindros a gas con un mínimo incremento depresión para aplicaciones que requieran unincremento de fuerza reducido.
Recomendamos calcular un 10% de reservade carrera.
SERIE W
The GA damper piston includes an internalcontrol device which permits the ram to reco-ver slowly; having being set to a desired speed.
We recommend a 10% reserve on the stroke.
Work velocity: 8-12 strokes/min.
RANGE GA
Minimum pressure increment gas cylinders forapplications which require a reduced increasein force.
We recommend that 10% of the stroke be keptin reserve.
RANGE W
Die “gedämpfte” Gasdruckfeder GA verfügtüber einen Kontrollmechanismus, der einengebremsten Rückstoß der Gasdruckfedergemäß einer einstellbaren Geschwindigkeitregelt.
Wir empfehleneine Hubreserve in Höhe von10% bei Ihrer Konstruktion vorzusehen.
Zulässige Hubzahl: 8-12 Hübe/min.
SERIE GA
Gasdruckfedern mit einem minimalenDruckanstieg für Anwendungen, die einen redu-zierten Anstieg der Druckkräfte erfordern.
Wir empfehlen, eine Reserve in der Ausnutzungder Hubstrecke von 10% vorzunehmen.
SERIE W
Le cylindre d’amortissement GA comprend undispositif de contrôle interne qui permet unelente récupération de la tige réglée à la vitessevoulue.
Nous recommandons une économie de coursede 10%.
Vitesse du travail: 8-12 coups/min.
SÉRIE GA
Cylindres à gaz avec une augmentation mini-mum de pression pour des applications quiexigent une augmentation réduite de force.
Nous recommandons de calculer 10% deréserve de course.
SÉRIE W
AMORTIGUACION
DAMPED
NITROGAS 79
MODELO-MODEL
M8x5(min)
MET.
B
L
A
E
CARR
ERA
D
3
78
STRO
KE
EQUIDISTANT
G1 8
GA
MODELOMODEL
CarreraStrokemm.
GA-750-50
GA-750-63
GA-750-80
GA-750-100
GA-750-125
GA-750-160
GA-750-200
GA-750-250
GA-750-300
GA-1500-50
GA-1500-63
GA-1500-80
GA-1500-100
GA-1500-125
GA-1500-160
GA-1500-200
GA-1500-250
GA-1500-300
GA-3000-50
GA-3000-63
GA-3000-80
GA-3000-100
GA-3000-125
GA-3000-160
GA-3000-200
GA-3000-250
GA-3000-300
GA-5000-50
GA-5000-63
GA-5000-80
GA-5000-100
GA-5000-125
GA-5000-160
GA-5000-200
GA-5000-250
GA-5000-300
50
63
80
100
125
160
200
250
300
50
63
80
100
125
160
200
250
300
50
63
80
100
125
160
200
250
300
50
63
80
100
125
160
200
250
300
A LB DFuerza-Force
daN150 Bar
750
1500
3000
5000
145
158
175
195
220
255
295
345
395
160
173
190
210
235
270
310
360
410
170
183
200
220
245
280
320
370
420
190
203
220
240
265
300
340
390
440
195
221
255
295
345
415
495
595
695
210
236
270
310
360
430
510
610
710
220
246
280
320
370
440
520
620
720
240
266
300
340
390
460
540
640
740
50
75
95
120
25
36
50
65
CILINDROS CON SISTEMA DEAMORTIGUACIONCYLINDERS WITH A DAMPERSYSTEM
2 x M8
4 x M8
4 x M8
4 x M10
METMODELOMODEL
GA-750
GA-1500
GA-3000
GA-5000
20
40
60
80
EOPCIONES: Fijación mediante bridas de amarre tipo GR, BF y XS.
Posibilidad de conexionar los cilindros a un panel de controlpara obtener una presión común.
OPTIONS: Attachment by means of GR, BF and XS type flanges.Possibility of connecting the cylinders to a control panel inorder to achieve a common pressure.
PATENTE Nº 8.903.555
NITROGAS 80
MODELO-MODEL
M8x5(min)
MET.
B
D
78
E
L
A
F
3
CARR
ERA
STRO
KE
EQUIDISTANT
G1 8
W
MODELOMODEL
CarreraStrokemm.
W-750-12,7
W-750-25
W-750-38
W-750-50
W-750-63
W-750-80
W-750-100
W-750-125
W-750-160
W-1500-12
W-1500-25
W-1500-38
W-1500-50
W-1500-63
W-1500-80
W-1500-100
W-1500-125
W-1500-160
W-3000-12
W-3000-25
W-3000-38
W-3000-50
W-3000-63
W-3000-80
W-3000-100
W-3000-125
W-3000-160
W-5000-12
W-5000-25
W-5000-38
W-5000-50
W-5000-63
W-5000-80
W-5000-100
W-5000-125
W-5000-160
12,7
25
38
50
63
80
100
125
160
12
25
38
50
63
80
100
125
160
12
25
38
50
63
80
100
125
160
12
25
38
50
63
80
100
125
160
AFuerza InicialInitial Force
150 Bar
750
daN
1500
daN
3000
daN
5000
daN
107,7
120
133
145
159
175
195
220
255
122
135
148
160
174
190
210
235
270
132
145
158
170
184
200
220
245
280
152
165
178
190
204
220
240
265
300
Fuerza FinalMedia
Mean Final Force150 Bar
B D
75
95
120
150
25
36
50
65
E
68
87
112
142
120,4
145
171
195
222
255
295
345
415
134
160
186
210
237
270
310
360
430
144
170
196
220
247
280
320
370
440
164
190
216
240
267
300
340
390
460
860
daN
1725
daN
3450
daN
5750
daN
LCILINDROS CON BAJACOMPRESIONCYLINDERS WITH LOWINCREASE PRESSURE
4 x M8
4 x M8
4 x M10
4 x M10
METMODELOMODEL
W-750
W-1500
W-3000
W-5000
40
60
80
100
FOPCIONES: Fijación mediante bridas de amarre tipo GR, BF y XS.
Posibilidad de conexionar los cilindros a un panel de controlpara obtener una presión común.
OPTIONS: Attachment by means of GR, BF and XS type flanges.Possibility of connecting the cylinders to a control panel inorder to achieve a common pressure.
PATENTE Nº 8.903.555
BAJA
COMPRESION
LOW INCREASE
CN
OM
OCo
mité
de
Norm
alisa
tion
des
Outil
lage
s et
Mac
hine
s-Ou
tils
NITROGAS 82
La Série Standard de cylindres et systèmes defixation qui sont montrés dans cette édition,présentent les caractéristiques en accord avecles spécifications des normes CNOMO (Comitéde Normalisation des Outillages et Machines-Outils).
Moyen de pression NitrogèneVitesse linéaire de la tige � 0,5 m/sTempérature max. de travail +80°C
Nous recommandons de calculer 10% deréserve de course.
Die Standardtypenreihe der Gasdruckfedernund Besfestigungselemente, die auf diesenDatenblättern erscheinen, stellen die Eigen-schaften gemäß der Bauvorschriften undVorgaben der CNOMO-Norm (Comité deNormalisation des Outillages et Machines-Outils) dar.
Druckmittel StickstoffLineare Kolbengeschwindigkeit � 0,5 m/sMax. Arbeitstemperatur +80°C
Wir empfehlen, eine Reserve in derAusnutzung der Hubstrecke von 10% vorzu-nehmen.
La Serie Standard de cilindros y sistemas defijación que se muestran en esta edición pre-sentan las características de acuerdo con lasespecificaciones de las normas CNOMO(Comité de Normalisation des Outillages etMachines-Outils).
Medio de presión NitrógenoVelocidad lineal de vástago � 0,5 m/sTemperatura máx. de trabajo +80°C
Recomendamos calcular un 10% de reservade carrera.
The characteristics for the Standard series ofcylinders and attachment systems which areshown in this publication comply with the spe-cifications for the CNOMO standards (Comitéde Normalisation des Outillages et Machines-Outils).
Means of pressure NitrogenLineal ram speed � 0,5 m/sec.Max. Working temperature +80°C
We recommend that 10% of the stroke be keptin reserve.
NITROGAS 83
CILINDROS AUTÓNOMOSSELF-CONTAINED SPRINGS
M6x5(min)
M6x5(min)
CN-150
MODELOMODEL
Fuerza InicialInitial Force
CarreraStrokemm.
10
12,7
16
25
38,1
50
63,5
80
100
CN-150-10
CN-150-12,7
CN-150-16
CN-150-25
CN-150-38,1
CN-150-50
CN-150-63,5
CN-150-80
CN-150-100
CN-150-125
PresiónPressure A L
60
62,7
66
75
88,1
100
113,5
130
150
175
70
75,4
82
100
126,2
150
177
210
250
300
135 bar 150 daN
125
M6x5(min)
10.5
R1
STR
OK
E
44
ø33
2XM8 EQUIDISTANT
ø36
ø38
A
L
ø20
2
CA
RR
ER
A
M6
ø16
CN-250
MODELOMODEL
Fuerza InicialInitial Force
CarreraStrokemm.
PresiónPressure A L
CN-250-10
CN-250-12,7
CN-250-16
CN-250-19
CN-250-25
CN-250-38,1
CN-250-50
CN-250-63,5
CN-250-80
CN-250-100
10
12,7
16
19
25
38,1
50
63,5
80
60
62,7
66
69
75
88,1
100
113,5
130
150
70
75,4
82
88
100
126,2
150
177
210
250
125 bar 250 daN
CN-250-125 125
100
175 300
PATENTE Nº 8.903.555CNOMO
Comité de Normalisation des Outillages et Machines-Outils
NITROGAS 84
M6x5(min)
ø22
STR
OK
E
14.5
R1ø43
2XM8 EQUIDISTANT44
ø45
ø38
L
A
ø20
CA
RR
ER
A
2
G1 8
CN-500
MODELOMODEL
Fuerza InicialInitial Force
CarreraStrokemm.
12,7
25
38,1
50
63,5
80
100
125
160
PresiónPressure A L
97,7
110
123,1
135
148,5
165
185
205
245
110,4
135
161,2
185
212
245
285
335
405
CN-500-12,7
CN-500-25
CN-500-38,1
CN-500-50
CN-500-63,5
CN-500-80
CN-500-100
CN-500-125
CN-500-160
135 bar 500 daN
M8x5(min)
ø25
87
14.5
ø50
ø46
2XM8
ø43
L
A
ø20
CARR
ERA
3
STRO
KE
R2
G1 8
G-750
MODELOMODEL
Fuerza InicialInitial Force
CarreraStrokemm.
PresiónPressure A L
G-750-12,7
G-750-25
G-750-38,1
G-750-50
G-750-63,5
G-750-80
G-750-100
G-750-125
G-750-160
G-750-200
G-750-250
G-750-300
25
38,1
50
63,5
80
100
125
160
200
250
300
150 bar 750 daN
12,7
120
133,1
145
158,5
175
195
220
255
295
345
395
145
171,2
195
222
255
295
345
415
495
595
695
107,7 120,4
CILINDROS AUTÓNOMOSSELF-CONTAINED SPRINGS
PATENTE Nº 8.903.555CNOMO
Comité de Normalisation des Outillages et Machines-Outils
NITROGAS 85
M8 x 5(min.)
4XM887
ø68
ø75
ø70
L
A
ø40
18
ø36
3
CARR
ERA
STRO
KE
EQUIDISTANT
R2,5
G1 8
G-1500
MODELOMODEL
Fuerza InicialInitial Force
CarreraStrokemm.
PresiónPressure A L
G-1500-12,7
G-1500-25
G-1500-38,1
G-1500-50
G-1500-63,5
G-1500-80
G-1500-100
G-1500-125
G-1500-160
G-1500-200
G-1500-250
G-1500-300
12,7
25
38,1
50
63,5
80
100
125
160
200
250
300
122,7
135
148,1
160
173,5
190
210
235
270
310
360
410
135,4
160
186,2
210
237
270
310
360
430
510
610
710
150 bar 1500 daN
M8 x 5(min.)
4XM8
78
ø87
ø95
ø90 L
A
ø60
21
CARR
ERA
ø50
3
STRO
KE
R2,5
EQUIDISTANT
G1 8
G-3000
MODELOMODEL
Fuerza InicialInitial Force
CarreraStrokemm.
PresiónPressure A L
G-3000-12,7
G-3000-25
G-3000-38,1
G-3000-50
G-3000-63,5
G-3000-80
G-3000-100
G-3000-125
G-3000-160
G-3000-200
G-3000-250
G-3000-300
12,7
25
38,1
50
63,5
80
100
125
160
200
250
300
132,7
145
158,1
170
183,5
200
220
245
280
320
370
420
145,4
170
196,2
220
247
280
320
370
440
520
620
720
150 bar 3000 daN
CILINDROS AUTÓNOMOSSELF-CONTAINED SPRINGS
PATENTE Nº 8.903.555CNOMO
Comité de Normalisation des Outillages et Machines-Outils
NITROGAS 86
M8 x 5(min.)C
AR
RER
A
78 4XM10
ø112
ø115
ø120
L
A
ø80
22.5
ø653
STRO
KE
R2.5
EQUIDISTANT
G1 8
G-5000
MODELOMODEL
Fuerza InicialInitial Force
CarreraStrokemm.
PresiónPressure A L
G-5000-12,7
G-5000-25
G-5000-38,1
G-5000-50
G-5000-63,5
G-5000-80
G-5000-100
G-5000-125
G-5000-160
G-5000-200
G-5000-250
G-5000-300
12,7
25
38,1
50
63,5
80
100
125
160
200
250
300
152,7
165
178,1
190
203,5
220
240
265
300
340
390
440
165,4
190
216,2
240
267
300
340
390
460
540
640
740
150 bar 5000 daN
M8 x 5(min.)
CARR
ERA
88
4XM10
ø142
ø150
ø145
L
A
ø100
24.5
3
ø80
STRO
KE
R2.5
EQUIDISTANT
G1 8
CN-7500
MODELOMODEL
Fuerza InicialInitial Force
CarreraStrokemm.
PresiónPressure A L
150 bar 7500 daN
180,4
205
231,2
255
282
315
355
405
475
555
655
755
164,7
180
193,1
205
218,5
235
255
280
315
355
405
455
12,7
25
38,1
50
63,5
80
100
125
160
200
250
300
CN-7500-12,7
CN-7500-25
CN-7500-38,1
CN-7500-50
CN-7500-63,5
CN-7500-80
CN-7500-100
CN-7500-125
CN-7500-160
CN-7500-200
CN-7500-250
CN-7500-300
CILINDROS AUTÓNOMOSSELF-CONTAINED SPRINGS
PATENTE Nº 8.903.555CNOMO
Comité de Normalisation des Outillages et Machines-Outils
NITROGAS 87
BRIDASFLANGES
20
øC
A
B
AB-0
.2-0
.3
D
A
B
AB
D
øC
Modelo BridaFlange Model A
BF-500
BF-750
BF-1500
BF-3000
BF-5000
BF-7500
CN-500
G-750
G-1500
G-3000
G-5000
CN-7500
Mod. CilindroCylinder Mod. B øC D
70
75
100
120
140
190
50
56,5
73,5
92
109,5
138
9
9
11
13
13
17
–
–
M20
M20
M20
M20
Modelo BridaFlange Model AMod. Cilindro
Cylinder Mod. B øC DGR-300
FR-250
FR-500
GR-750
GR-1500
GR-3000
GR-5000
GR-7500
CN-150
CN-250
CN-500
G-750
G-1500
G-3000
G-5000
CN-7500
50
55
70
75
100
120
140
190
35
40
50
56,5
73,5
92
109,5
138
7
7
9
9
11
13
13
17
7
7
7
12
12
12
12
12
PATENTE Nº 8.903.555CNOMO
Comité de Normalisation des Outillages et Machines-Outils
BF GR-FR
NITROGAS 88
BRIDASFLANGES
B
DB
C F
E
C D
E
B A
B
A
A
30
F
H
D
B
IG
==
20
EC
Modelo BridaFlange Model BMod. Cilindro
Cylinder Mod.
XS-150
XS-250
XS-500
XS-750
XS-1500
XS-3000
XS-5000
XS-7500
CN-150
CN-250
CN-500
G-750
G-1500
G-3000
G-5000
CN-7500
35
40
50
56,5
73,5
92
109,5
138
9
9
13
13
16
18
21
27
60
68
86
95
122
150
175
220
7
7
9
9
11
13
13
17
C D E F15
15
21
21
26
30
33
38
Modelo BridaFlange Model AMod. Cilindro
Cylinder Mod.
CS-750
CS-1500
CS-3000
CS-5000
G-750
G-1500
G-3000
G-5000
50
75
95
120
B50
63,5
80
92,5
C110
137
170
195
D 60
75
92,5
105
E F G H I130
160
195
220
9
11
13
13
80
105
125
148
90
115
145
165
40
52,5
67,5
77,5
PATENTE Nº 8.903.555CNOMO
Comité de Normalisation des Outillages et Machines-Outils
Modelo BridaFlange Model
XC-250
XC-500
XC-750
XC-1500
XC-3000
XC-5000
A52
64
70
90
110
130
40
50
56,5
73,5
92
109,5
B9
13
13
16
18
21
C17
21
24
29
30
33
D E7
9
9
11
13
13
XS CS
XC
NITROGAS 89
CILINDROS CONEXIONADOS, SUSPENDIDOSCONNECTED GAS SPRING, SUSPENDED
D
M8 x 5(min.)
F
22
S 12
,65X
1,5
CARR
ERA
E
C
EC
12.5
A
L
B
M
Screw 1/8"2XM16
STRO
KE
3
MODELOMODEL
CarreraStrokemm.
25
38
50
63
80
100
125
160
200
250
300
25
38
50
63
80
100
125
160
200
250
300
25
38
50
63
80
100
125
160
200
250
300
25
38
50
63
80
100
125
160
200
250
300
A LFuerza InicialInitial Force B D
G-750-25-9
G-750-38-9
G-750-50-9
G-750-63-9
G-750-80-9
G-750-100-9
G-750-125-9
G-750-160-9
G-750-200-9
G-750-250-9
G-750-300-9
G-1500-25-9
G-1500-38-9
G-1500-50-9
G-1500-63-9
G-1500-80-9
G-1500-100-9
G-1500-125-9
G-1500-160-9
G-1500-200-9
G-1500-250-9
G-1500-300-9
G-3000-25-9
G-3000-38-9
G-3000-50-9
G-3000-63-9
G-3000-80-9
G-3000-100-9
G-3000-125-9
G-3000-160-9
G-3000-200-9
G-3000-250-9
G-3000-300-9
G-5000-25-9
G-5000-38-9
G-5000-50-9
G-5000-63-9
G-5000-80-9
G-5000-100-9
G-5000-125-9
G-5000-160-9
G-5000-200-9
G-5000-250-9
G-5000-300-9
750 daN
1500 daN
3000 daN
5000 daN
50
75
95
120
25
36
50
65
145
158
170
183
200
220
245
280
320
370
420
160
173
185
198
215
235
260
295
335
385
435
175
188
200
213
230
250
275
310
350
400
450
200
213
225
238
255
275
300
335
375
425
475
170
196
220
246
280
320
370
440
520
620
720
185
211
235
261
295
335
385
455
535
635
735
200
226
250
276
310
350
400
470
550
650
750
225
251
275
301
335
375
425
495
575
675
775
62
76
95
113
CFUERZAFORCE
750
1500
3000
5000
M10x30
M12x40
M16x50
M20x50
ME F 85
100
132
150
25
25
30
35
EJEMPLO DE MONTAJEEXAMPLE OF ASSEMBLY
PATENTE Nº 8.903.555CNOMO
Comité de Normalisation des Outillages et Machines-Outils
NITROGAS 90
ADAPTADOR MULTIPLE MP-125MULTIPLE ADAPTOR MP-125
42
50
70
30
G1/8"
25
18
Screw G1/8"
Adaptador múltiple para la interconexión de cilindros a gas. Este sistema tiene la ventaja de unaunión desmontable sin pérdida de gas. Se puede acoplar a cilindros del tipo: G-750, G-1500,G-3000, G-5000 y CN 7500.
DEFINICION:
Multiple adapter for connecting up gas cylinders. This system has the advantage of a union that maybe removed without loss of gas. Cylinder types G-750, G-1500, G-3000, G-5000 and CN 7500 maybe coupled together.
DEFINITION:
EJEMPLOS DE MONTAJE - EXAMPLE OF ASSEMBLY
EJEMPLO DE PEDIDO:
1 Cilindro G-750 de carrera 50 mm, equipado conadaptador múltiple con conexión horizontal tipo “A”.
Código pedido:
1 G-750-50-A
ORDER EXAMPLE:
50 mm stroke G-750 cylinder, fitted with a multipleadapter, with a type “A” horizontal connection.
Order code:
1 G-750-50-A
PATENTE Nº 8.903.555CNOMO
Comité de Normalisation des Outillages et Machines-Outils
Connection A Connection B Connection C Connection D
NITROGAS 91
ACCESORIOSACCESSORIES
822
S 12
.65X
1.5
G1/
8"
SW14
RM-101Válvula de presión MINIMESSMINIMESS pressure valve
G1/
8"
20
G1/
8"
8
SW17
RM-103Racord a cilindroAdaptor to cylinder
25
G1/8"
3224
G1/
8"
SW17
RM-105Racord TT Connector
29
S 12,65X1,5
S 12,65X1,5
SW14
RM-109Conector para latiguillo flexibleConnector for flexible hose
G1/8"
812
ø14
SW5
RM-107TapónScrew
3224
G1/
8"
G1/8"
SW17
RM-106Racord 90ºConnector 90º
PATENTE Nº 8.903.555CNOMO
Comité de Normalisation des Outillages et Machines-Outils
NITROGAS 92
LATIGUILLOS DE CONEXION FLEXIBLESFLEXIBLE CONNECTION HOSES
17
ø20S 12,65X1,5
5
Longitud / Length
MODELOMODEL
Longitud - Lengthmm.
LM1-200LM1-300LM1-400LM1-500LM1-630LM1-800LM1-1000LM1-1200LM1-1500LM1-2000LM1-2500LM1-3000
200300400500630800100012001500200025003000
S 12,65X1,5 17
ø20
Longitud / Length
5
MODELOMODEL
Longitud - Lengthmm.
LM2-200LM2-300LM2-400LM2-500LM2-630LM2-800LM2-1000LM2-1200LM2-1500LM2-2000LM2-2500LM2-3000
200300400500630800100012001500200025003000
S 12,65X1,5
Longitud / Length
5
MODELOMODEL
Longitud - Lengthmm.
LM3-200LM3-300LM3-400LM3-500LM3-630LM3-800LM3-1000LM3-1200LM3-1500LM3-2000LM3-2500LM3-3000
200300400500630800100012001500200025003000
25
12M5
Abrazadera para latiguillo flexible
Flexible hose retainer
PATENTE Nº 8.903.555CNOMO
Comité de Normalisation des Outillages et Machines-Outils
RM-108Longitud mínima de latiguillo = 200 mm.Minimum length for hoses = 200 mm.
Margen ±5 mm±5mm Margin
Longitudes menores, consultar alfabricanteFor shorter lengths, refer to themanufacturer.
NITROGAS 93
80S 12,65X1,5
Screw G1/8"
Manómetro control presiónPressure control pressure guage
Válvula de vaciadoEmptying valve
Válvula de llenadoFilling valve
Minimess Type 1620CEJN{
Panel de control para cilindros conexionadosentre si. La presión puede ser variadamediante las válvulas de carga y descarga.Admite la conexión de cilindros tipo G-750,G-1500, G-3000, G-5000 y CN-7500.
PC-1-01PC-1-02
CODIGO DE PEDIDO:
PC-1-01con válvula llenado MINIMESS
PC-1-02con acoplamiento rápido CEJN
1913
96
50
33 6
34
77 84
2 x ø7
Minimess 1215
Valve CEJN
Mano. ø40
MINI-CENTRAL de control permanente de lapresión para cilindros conexionados entre si.Admite la conexión de cilindros tipo G-750,G-1500, G-3000, G-5000 y CN-7500.
MINI POWER UNIT for constant pressurecontrol, for cylinders which are connected toeach other. Allows G-750, G-1500, G-3000,G-5000 and CN-7500 cylinder types to beconnected.
PC-7
Control panel for cylinders connected toeach other. The pressure can be adjusted bymeans of load/unload valves. Allows G-750,G-1500, G-3000, G-5000 and CN-7500cylinder types to be connected.
ORDER EXAMPLE:
PC-1-01with MINIMS filling valve
PC-1-02with CEJN filling valve
23
81
23 120
ACCESORIOSACCESSORIES
PATENTE Nº 8.903.555
• Se dispone de carcasa de protecciónfrontal REF.: CPC
• We also have a frontal protection carcassREF.: CPC
NITROGAS 94
CN-150
CN-250
CN-500
G-750
G-1500
G-3000
G-5000
CN-7500
Modelo PlacaPlate Model AMod. Cilindro
Cylinder Mod. B C D52
52
57
72
77
87
102
112
E F GSP-150
SP-250
SP-500
SP-750
SP-1500
SP-3000
SP-5000
SP-7500
27
27
32
37
52
62
82
102
12
12
12
15
15
15
20
20
7
7
7
9
9
9
11
11
11
11
11
15
15
15
18
18
32
32
40
48
56
66
72
85
8
8
14
14
30
40
56
75
E
D
CB G
FA
Placa identificación PI-119-1
ACCESORIOSACCESSORIES
PATENTE Nº 8.903.555
NITROGAS® PATENTE Nº 8.903.555Tel. +34-945-275544 - Fax: +34-945-268300
Preservar de choques, calor, proyecciones...
ATENCION: Util equipado con resortes agas en:
MODELO ___________________CARRERA ___________CANTIDAD _____________Carrera UTIL_____________
Fuerza por cilindro __________daNFuerza total de trabajo ______daN
PRESION DE CARGA ___________baresNº RI 01/6557 FBG - 9127
Identification plate PI-119-2
NITROGAS® PATENT Nº 8.903.555Tel. +34-945-275544 - Fax: +34-945-268300
Protect against knocks, heat, dirt etc...
ATTENTION: Utility fitted with gas springsin:
MODEL_____________________STROKE ____________QUANTITY _____________Useful stroke ____________
Force per cylinder___________daNTotal working force _________daN
LOADING PRESSURE___________BarNº RI 01/6557 FBG - 9127
Werkzeugplakette PI-119-3
NITROGAS® PATENT- Nr. 8.903.555Tel. +34-945-275544 - Fax: +34-945-268300
Bitte Stöße, Hitzeeinwirkung, Schmutz etc. vermeiden!
ACHTUNG: Werkzeug ist mit folgendenGasdruckfedern ausgestattet:
Typ ________________Hublänge der Gasdruckfeder _______Menge _________________Arbeitshub_______________
Anfangskraft pro Gasdruckfeder ________daNGesamtanfangskraft ________________daN
FÜLLDRUCK _______________________BarNr. RI 01/6557 FBG - 9127
Plaque d’Identification PI-119-4
NITROGAS® BREVET Nº 8.903.555Tel. +34-945-275544 - Fax: +34-945-268300
Protéger des chocs, de la chaleur, des projections...
ATENTION: Outil équipé de ressorts à gaz,sur:
MODÈLE ___________________COURSE ____________QUANTITÉ _____________COURSE UTILE __________
Force par cylindre___________daNForce totale du travail _______daN
PRESSION DE CHARGE ________barNº RI 01/6557 FBG - 9127
E
NITROGAS 96
Éjecteurs à corps vissé pour application dansla construction de matrices, d’outillages depresses, etc.
Le goujon est équipé d’une tête sphérique surle point de contact pour absorber les forcesaxiales.
Nous recommandons de calculer 10% deréserve de course.
Abdrückstifte, die über einen mit Gewinde ver-sehenen Körpern verfügen, zum Einsatz in derHerstellung von Matrizen, Preß- Zieh undStanzstempel usw...
Die Kolbenstange ist auf der Kontaktfläche miteinem kugelförmigen Kopf ausgestattet, umdie Seitenkräfte auszugleichen.
Wir empfehlen, eine Reserve in derAusnutzung der Hubstrecke von 10% vorzu-nehmen.
Expulsores con cuerpo roscado para la aplica-ción en la construcción de matrices, útiles deprensa, etc.
La espiga está dotada con cabeza esférica enel punto de contacto, para absorber las fuer-zas axiales.
Recomendamos calcular un 10% de reservade carrera.
Ejectors with threaded bodies for applicationsin the construction of dies, pressing utilities,etc.
The pin is fitted with a spherical head at thecontact end to absorb axial forces.
We recommend that 10% of the stroke be keptin reserve.
NITROGAS 97
øD
øB
3
CARR
ERA
øC
M6
L
A
E
3 STRO
KE
MODELOMODEL
CarreraStrokemm.
øB
M16x1,5
M24x1,5
14
22
4,8
10
35
40
3,6 daN
15,7 daN
30,7 daN
133 daN
øC øD E A LFuerza InicialInitial Force
min.20 bar
max.170 bar
E-16-10
E-16-20
E-16-30
E-16-40
E-16-50
E-16-60
E-16-70
E-16-80
E-16-100
E-24-10
E-24-20
E-24-30
E-24-40
E-24-50
E-24-60
E-24-70
E-24-80
E-24-100
10
20
30
40
50
60
70
80
100
10
20
30
40
50
60
70
80
100
70
80
90
100
110
120
130
140
160
70
80
90
100
110
120
130
140
160
80
100
120
140
160
180
200
220
260
80
100
120
140
160
180
200
220
260
El atornillado y desatornillado de los cilindros, debe realizarse sólo con la llave original correspondiente.
The Screwing up und unscrewing of the cylinders must only be done with the original corresponding key.
MODELO-MODEL
E-16 E-24
4cantidad - quantity
modelo - model
E-16 - 30
carrera - stroke
25fuerza - force (daN)
EJEMPLO PEDIDO - ORDER EXAMPLE
E-16
E-24
Modelo cilindro
Cylinder model
E-16-R
E-24-R
Modelo llave
Key model
PATENTE Nº 8.903.555
NITROGAS 98
C
M
L
D
A
P D M
L
A
R
C
P
SW
MODELOMODEL
E-201-04
E-201-05
E-201-06
E-201-08
E-201-10
E-201-12
L 9,8
12,9
15
17,5
21
24,5
MODELOMODEL C
E-202-04
E-202-05
E-202-06
E-202-08
E-202-10
E-202-12
E-202-16
1,5
2,3
2,5
3
3
4
5
A 7
10
13
14
15
18
MM4
M5
M6
M8
M10
M12
D2,5
3
3,5
5
6
8
C0,8
0,9
1
1,5
2
2,5
0,4
0,6
0,9
1,5
2
3
1
1,1
1,3
3
3,5
5,5
F daNC=0
F daNC maxi D M R SW A L F daN
C=0F daNC maxi
1,5
2,4
2,7
3,5
4
6
7,5
M4
M5
M6
M8
M10
M12
M16
0,6
0,8
1
1,2
1,6
2
2,5
1,3
1,5
2
2,5
3
4
5
15
18
20
22
22
28
32
16,5
20,3
22,5
25
25
32
37
0,5
0,6
0,7
0,9
0,9
1
4,5
1,6
2
2
3,5
3,5
5,5
10
MODELO-MODEL
E-201 E-202
EJEMPLO PEDIDO - ORDER EXAMPLE:
E-202-08
MATERIAL: Cuerpo F-1140 pavonado.Vástago F-1510 cementado, templado ypavonado.
MATERIAL: Body F-1140 blackened.Pin F-1510 case hardened, tempered andblackened.
MATERIAL: Cuerpo F-1140 pavonado.Vástago F-1510 cementado, templado ypavonado.
MATERIAL: Body F-1140 blackened.Pin F-1510 case hardened, tempered andblackened.
E-2
01
E-2
02
EXPULSORES DE MUELLESPRING PLUNGERS
EXPULSORES DE MUELLESPRING PLUNGERS
NITROGAS 99
MODELO-MODEL
E-203 E-204ø5
.9
ø105.5
26 410
ø13
0+0.2
-0.20
1.6
P D
CL
dd
S
1 2 P
MODELOMODEL
E-203
MODELOMODEL d1
E-204-04
E-204-05
E-204-06
E-204-08
4
5
6
8
4,58 daN
F Inicial D±0,05
3
4
5
6,5
4,6
5,6
6,5
8,5
0,8
1
1,5
1,8
5
6
7
9
1
1
1
1
0,2
0,4
0,6
0,6
0,5
0,7
1,2
1,2
d2 C L SF daN
Inicial Final
10 daN
F Final
EJEMPLO PEDIDO - ORDER EXAMPLE:
E-204-06
MATERIAL: Cuerpo F-1132 pavonado.Pivote F-1510 cementado, templado ypavonado.
MATERIAL: Body F-1132 blackened.Pin F-1510 case hardened, tempered andblackened.
MATERIAL: Acero inoxidable.
MATERIAL: Stainless steel.
E-2
03
E-2
04
EXPULSORES DE MUELLESPRING PLUNGERS
POSICIONADOR ESTAMPADOSPRING PLUNGER SMOOTH
NITROGAS 100
MODELO-MODELEL-1 / EL-2 / EL-3EL-4 / EL-5 / EL-6
MODELOMODEL
Fuerza InicialInitial Force
daN
Fuerza Final MediaMean Final Force
daN
CarreraStroke
EL - 1
EL - 2
EL - 3
EL - 4
EL - 5
EL - 6
A75
150
75
150
75
150
G-200-50 verde
G-200-50 azul
G-200-63 verde
G-200-63 azul
G-200-80 verde
G-200-80 azul
Modelo de cilindroGas Spring Model
50
65
80
L50
100
50
100
50
100
257
310,5
395,5
147
185,5
219,5
S
NITROGAS 102
Avec la série "S" NITROGAS élargit sa gamme de cylindres à gazqui peuvent même travailler interconnectés à un tableau decontrôle. Pour ce faire la série est équipée d'un système de rac-cordement et de tableaux de contrôle d'un encombrement ré
duit pour permettre au client de prévoir un minium de place pourmonter les cylindres sur l'une quelconque de ses applications.
Les cylindres de cette série comme tous ceux fabriqués parNITROGAS disposent d'un double guidage (dans l'axe et la doui-lle) qui assurent un alignement parfait ainsi qu'un auto-centragede la tige.
Comme il en est pour tous nos cylindres, tous les éléments d'é-tanchéité usés peuvent être remplacés très facilement et rapide-ment.
CONDITIONS DE TRAVAILÊ- Il est recommandé de réserver 10 % de la course nominale.
- La température de travail doit être entreÊ: -5ºC et +80ºC.
- Il est conseillé de faire travailler le cylindre précomprimé et dansson é tendue maximale afin d'éviter l'usure provoquée par chocset réduire le niveau sonore.
- La base d'appui du cylindre ainsi que la zone qui pousse la tigedoivent ê tre parfaitement parallèles pour éviter les forces latéra-les durant le fonctionnement du cylindre. De même, les élémentsde guidage de la poinçonneuse ou de la machine doivent êtreparfaitement alignés pour éviter des mouvements qui risquent denuire au cylindre.
- La vitesse de travail est indiquée dans le tableau ci-dessous.
GARANTIE- Tous les cylindres de NITROGAS sont garantis 2 ans ou 100 000
mètres de parcours de la tige.
- Cette garantie est annulée si les conditions de travail précitéesne sont pas respectées par le client
Mit der Typenreihe “S” erweitert NITROGAS die Produktpaletteder kompakten Gasdruckfedern; mit der Möglichkeit einesSchlauchverbundes und Anschlusses an einer gemeinsamenSteuereinheit. Hierfür hat NITROGAS Schlauchverbinder undSteuereinheiten kompakterer Abmessungen ausgewählt, um denPlatzbedarf in allen Anwendungen auf ein Äusserstes zu verklei-nern. Auch bei dieser Typenreihe behält NITROGAS das Systemder doppelten Führung (Kolbenstangenscheibe undFührungsbuchse) bei, mit dem sowohl eine optimale Führung alsauch eine Selbstzentrierung der Kolbenstange erreicht wird.
Wie bei allen anderen Gasdruckfedern von NITROGAS ist auch beidieser Typenreihe eine wirtschaftliche und schnelle Wartungmöglich.
ARBEITSBEDINGUNGEN- Bitte eine Hubreserve von 10 % einhalten.
- Die Arbeitstemperatur sollte zwischen -5°C und + 80°C liegen.
- Ein Betrieb unter Vorspannung wird empfohlen, um eineSchlagbelastung beim Rückhub, auf die Kolbenstangenscheibewirkend, sowie eine Lärmbelastung gänzlich zu vermeiden. Solltedies kontruktiv nicht möglich sein, sollte darauf geachtet werden,daß beim Rückhub (Aufwärtsbewegung des Pressenstössels) diemaximale Hubgeschwin-digkeit der Gasdruckfeder nichtüberschritten wird.
- Die Kontaktflächen im Werkzeug, zur Befestigung und zurKolbenbetäti-gung, müssen präzise parallel zum Federbodenausgelegt sein, um Seiten-belastungen auszuschliessen. Auchdie Führungselemente des Werkzeu-ges sollten gut kontrolliertwerden, um Beeinträchtigungen durch Schübe bzw.Seitenbelastungen, die auf die Kolbenstange wirken, zu vermei-den.
- Die Arbeitsgeschwindigkeit der Gasdruckfeder wird in der unte-ren Tabelle Aufgeführt.
GARANTIE- NITROGAS leistet innerhalb von 2 Jahren, jedoch für max.
100.000 Meter Hubstrecke, für alle GasdruckfedernGewährleistung auf die Standzeit.
- Dies gilt selbstverständlich nur bei Einhaltung o.g.Arbeitsbedingungen.
Con la serie “S” NITROGAS amplía su gama de cilindros a gascompactos incluso con la posibilidad de trabajar interconexio-nados a un panel de control. Para ello esta serie cuenta con unsistema de racoraje y paneles de control de reducidas dimen-siones para que el cliente necesite un mínimo espacio paramontar los cilindros en cualquiera de sus aplicaciones.
En esta serie se mantiene la constante de NITROGAS de dotara todos sus cilindros de doble guiado (en eje y casquillo) quepermiten una alineación perfecta a la vez que autocentrante delvástago.
Como en todos nuestros cilindros, en caso de desgaste de loselementos de estanqueidad se puede proceder al cambio de losmismos de forma rápida y sencilla.
CONDICIONES DE TRABAJO- Se recomienda reservar un 10% de la carrera nominal.
- La temperatura de trabajo debe situarse entre -5ºC y +80ºC.
- Se recomienda que el cilindro trabaje precomprimido en sumáxima extensión para evitar desgaste por impacto y reducirel nivel de ruidos.
- Tanto la base de apoyo del cilindro como la zona que empujael vástago deben ser perfectamente paralelas para evitar fuer-zas laterales durante el funcionamiento del mismo. Igualmente,los elementos de guiado del troquel o máquina deben estarperfectamente ajustados evitando así movimientos que perju-diquen al cilindro.
- La velocidad de trabajo viene indicada en la tabla inferior.
GARANTIAS- NITROGAS garantiza durante 2 años o 100.000 metros de
recorrido de vástago todos sus cilindros.
- Dicha garantía quedará exenta si no se cumplen las condicionesde trabajo arriba indicadas.
With the “S” series NITROGAS widens its range of gas springseven with the possibility of working interconnected to a controlpanel. This series is provided with very small dimensions connec-tion system and control panel so that the customer require aminimum space to assembly the gas springs in any of its projects.
Is a NITROGAS business policy to provide double-guide system(in pistons as well as bushings) in our wide range of products thatenable the plunger to centre itself and line up perfectly.
As in the rest of the gas springs in the event of wear out on thesealing elements these can be replaced quickly and easily.
OPERATING SPECIFICATIONS- A 10% stroke is recommended.
- The working temperature should be between -5ºC and +80ºC.
- It is advisable that the gas spring work pre-comprised in it ismaximum extension to prevent from the impact worn out andreduce the noises level.
- The contact side in the body as well as in the piston, must beaccurately parallels to prevent from lateral forces during the wor-king period of the gas spring. Likewise, the guide elements inthe dye set or piece of equipment, must be perfectly fastenedpreventing this way the gas spring, from possibly harmful move-ments.
- The working speed is enclosed in the below graphic.
GUARANTY- NITROGAS offers a two years guaranty or 100.000 stroke metres
in all its gas springs.
- This guaranty will expire if the previously mentioned conditionsare not fulfilled.
NITROGAS 103
MODELO-MODEL
STR
OK
EC
AR
RE
RA
ø38
ø36
A
L
ø16
M6
ø33
4 4
12.5
R1
1625
2XM6
PATENTE Nº 8.903.555
S-300
MODELOMODEL
Fuerza InicialInitial Force
150 Bar
Fuerza FinalFinal Force
CarreraStroke
mmA L
300 daN
12,5
19
25
37,5
50
62,5
80
100,5
42,5
49
55
67,5
80
92,5
110
130,5
55
68
80
105
130
155
190
231
S-300-13
S-300-19
S-300-25
S-300-38
S-300-50
S-300-63
S-300-80
S-300-100
429 daN
428 daN
428 daN
428 daN
428 daN
428 daN
428 daN
428 daN
40
55
7
ø7
55408
179
ø7
40
40
52
52
BRIDA - FLANGE: FR-250 BRIDA - FLANGE: XC-250
Otros modelos de bridas consultar a fábrica. For a wider range of flanges consult to factory.
NITROGAS 104
MODELOMODEL
Fuerza InicialInitial Force
150 Bar
Fuerza FinalFinal Force
CarreraStroke
mmA L
570 daN
13
19
25
38
50
63
80
100
125
44
51
56,6
69
82
94
112
132
157
57
70
81,6
107
132
157
192
232
282
S-570-13
S-570-19
S-570-25
S-570-38
S-570-50
S-570-63
S-570-80
S-570-100
S-570-125
872 daN
838 daN
848 daN
853 daN
851 daN
856 daN
852 daN
852 daN
853 daN
MODELO-MODEL
STR
OK
EC
AR
RE
RA
M6
ø38
L
A
ø22
16
16.5
R1
44
ø43
ø45
20
2XM8
S-570PATENTE Nº 8.903.555
M8
M8
M10
20
M8
50
70
705020
50
70
7050
ø9
7.5
23
13
ø9
50
50
64
64
BRIDA - FLANGE: BF-500 BRIDA - FLANGE: FR-500 BRIDA - FLANGE: XC-500
Otros modelos de bridas consultar a fábrica. For a wider range of flanges consult to factory.
NITROGAS 105
MODELOMODEL
Fuerza InicialInitial Force
150 Bar
Fuerza FinalFinal Force
CarreraStroke
mmA L
750 daN
12,5
18,8
25
37,5
50
62,5
80
100
125
50,5
56,8
63
75,5
88
100,5
118
138
163
63
75,6
88
113
138
163
198
238
288
S-750-13
S-750-19
S-750-25
S-750-38
S-750-50
S-750-63
S-750-80
S-750-100
S-750-125
1110 daN
1115 daN
1117 daN
1120 daN
1121 daN
1122 daN
1123 daN
1123 daN
1123 daN
MODELO-MODEL
STR
OK
EC
AR
RE
RA
ø46.5
M8
16
44
ø45
ø25
17.5
R2
ø50
A
L
20
2XM8
S-750PATENTE Nº 8.903.555
56.575
24 56.5 75
ø9
7.6
20
56.575
7556.5
M10
20
M8
M8
M8
24
13
56.5 70
ø9
7056.5
16
7050
50 7020
M8
M8
BRIDA - FLANGE: BF-750 BRIDA - FLANGE: GRS-750 BRIDA - FLANGE: XC-750 BRIDA - FLANGE: MC-1000
Otros modelos de bridas consultar a fábrica. For a wider range of flanges consult to factory.
NITROGAS 106
MODELO-MODEL
STR
OK
EC
AR
RE
RA
8
17
ø40
M8
L
A
ø36
21
R2.5 ø70.2
ø75.2
ø67
74XM8 EQUIDISTANT
S-1500
MODELOMODEL
Fuerza InicialInitial Force
150 Bar
Fuerza FinalFinal Force
CarreraStroke
mmA L
1500 daN
25
37,5
50
62,5
80
100
125
73
85,5
98
110,5
128
148
173
98
123
148
173
208
248
298
S-1500-25
S-1500-38
S-1500-50
S-1500-63
S-1500-80
S-1500-100
S-1500-125
2268 daN
2277 daN
2281 daN
2283 daN
2286 daN
2287 daN
2289 daN
PATENTE Nº 8.903.555
20
9068
68 90
M8
M10
73.5100
73.5
100
12.5
ø9
73.5
100
M10
M8
20
73.5100
M20
29
16
73.590
73.5
90
ø11
BRIDA - FLANGE: BF-1500 BRIDA - FLANGE: GRS-1500 BRIDA - FLANGE: XC-1500 BRIDA - FLANGE: MC-2500
Otros modelos de bridas consultar a fábrica. For a wider range of flanges consult to factory.
NITROGAS 107
ACCESORIOSACCESSORIES
MODELO / MODEL Longitud mm / Length mmLMS1-100LMS1-200LMS1-300
–LMS1-XXX
100200300
–XXX
MODELO / MODEL Longitud mm / Length mmLMS2-100LMS2-200LMS2-300
–LMS2-XXX
100200300
–XXX
MODELO / MODEL Longitud mm / Length mmLMS3-100LMS3-200LMS3-300
–LMS3-XXX
100200300
–XXX
M10
X1
10
21
M6
10 e/c
10 30
RM-205Racor TT Connector
M10X1
17.5
28
M6
10 e/c
RM-203Racor a cilindroAdaptor to cylinder
Longitud / Length
12 e/c
Longitud / Length
12 e/c
Longitud / Length
12 e/c
M10
X1
10
21
M6
10 e/c
10 20
RM-206Racor 90ºConnector 90º
M10
X1
96
276
12 32 6
M10
X1
50
34
70
ScrewG1 / 8”
PC-27Mini-Panel de controlMini-Control Panel
LATIGUILLOS DE CONEXION FLEXIBLESFLEXIBLE CONNECTION HOSES
Radio mínimo de curvatura = 25 mm. Minimum bending radius = 25 mm.
MANI
FOLD
NITROGAS 110
Cylindres collectifs pour plaques collectricesou poumons de compensation et cylindresautonomes branchés entre eux.
Avec les deux applications, nous pouvonstransmettre la même puissance dans tout lecircuit.
La pression peut être réglée par l’intermédiaired’une soupape de charge et de décharge, parl’intermédiaire le tableau de contrôle.
Ce sont les méthodes les plus indiquées pourles outillages d’emboutissage.
Nous recommandons de calculer 10% deréserve de course.
Gasdruckfedern für den Einsatz in einergemeinsamen Druckplatte oder/und Anschlußan einen Ausgleichsbehälter sowie selbständigeGasdruckfedern, die mit Schlauchverbindernverbunden werden.
Bei beiden Anwendungen erzielen wir im gan-zen Kreislauf eine gleichmäßige Druckkraft-übertragung.
Der Druck kann mittels Einlaß, und Auslaßven-tile von einer gemeinsamen Steuereinheit ausreguliert werden.
Dieses System stellt die optimale Methode fürZiehoperationen dar.
Wir empfehlen, eine Reserve in derAusnutzung der Hubstrecke von 10% vorzu-nehmen.
Cilindros colectivos para placas colectoras opulmones de compensación y cilindros autó-nomos conexionados entre sí.
Con ambas aplicaciones conseguimos trans-mitir igual potencia en todo el circuito.
La presión puede ser regulada mediante válvu-las de carga y descarga, desde el panel decontrol.
Son el método más indicado para útiles deembutición.
Recomendamos calcular un 10% de reservade carrera.
Collective cylinders for collector plates or com-pensation lungs and autonomous cylindersconnected to each other.
With both applications we achieve uniformpower transmission for the whole circuit.
The pressure may be adjusted by means ofload / unload valves which are operated fromthe control panel.
These are the methods most used for pressworkutilities.
We recommend that 10% of the stroke be keptin reserve.
NITROGAS 111
MODELO-MODEL
CILINDROS COLECTIVOSCOLLECTIVE CYLINDERS
NGS
MODELOMODEL
37,5
50,5
62,5
75,5
87,5
112,5
NGS-3500-25
NGS-3500-38
NGS-3500-50
NGS-3500-63
NGS-3500-75
NGS-3500-100
L1
33,18
CarreraStrokemm.
Seccióncm2
F. daN100 Bar L2 C D E H G J
78,5
91,5
103,5
116,5
128,5
153,5
25
38
50
63
75
100
3500
40
88
M80x2
84
92
76
MODELOMODEL
54,5
67,5
79,5
92,5
104,5
129,5
NGS-5000-25
NGS-5000-38
NGS-5000-50
NGS-5000-63
NGS-5000-75
NGS-5000-100
50,26
CarreraStrokemm.
Seccióncm2
F. daN100 Bar
79,5
92,5
104,5
117,5
129,5
154,5
25
38
50
63
75
100
5000
110
M100x2
104
114
95
50
L1 L2 C D E H G J
PATENTE Nº 8.903.555
NITROGAS 112
MODELO-MODEL
CILINDROS COLECTIVOSCOLLECTIVE CYLINDERS
NSPATENTE Nº 8.903.555
P. Control
EJEMPLO DE MONTAJEEXAMPLE OF ASSEMBLY
CARR
ERA
D
C
I
9.5
1X15
º
0.5
H
E
M
45º
G
HE
K
N
J
L
BF
STRO
KE
H8
NOTA: Otras dimensiones bajo pedido. Consultar con fábrica.
NOTE: Other dimensions made to order. Consult with factory.
NITROGAS 113
MODELO-MODEL
MODELOMODEL
25
38
50
75
100
150
25
38
50
75
100
150
25
38
50
75
100
150
25
38
50
75
100
150
25
38
50
75
100
150
BCarreraStrokemm.
NS-1000-25
NS-1000-38
NS-1000-50
NS-1000-75
NS-1000-100
NS-1000-150
NS-2000-25
NS-2000-38
NS-2000-50
NS-2000-75
NS-2000-100
NS-2000-150
NS-3000-25
NS-3000-38
NS-3000-50
NS-3000-75
NS-3000-100
NS-3000-150
NS-4000-25
NS-4000-38
NS-4000-50
NS-4000-75
NS-4000-100
NS-4000-150
NS-5000-25
NS-5000-38
NS-5000-50
NS-5000-75
NS-5000-100
NS-5000-150
1000
2000
3000
4000
5000
62
75
87
112
137
187
59
72
84
109
134
184
64
77
89
114
139
189
64
77
89
114
139
189
76
89
101
126
151
201
91
117
141
191
241
341
88
114
138
188
238
338
93
119
143
193
243
343
93
119
143
193
243
343
106
132
156
206
256
356
9,62
19,63
28,27
38,48
50,26
22
30
40
40
50
54
70
88
90
108
M48x2
M64x2
M80x2
M82x2
M100x2
20
25
25
25
30
57
73
91
93
112
51
67
84
86
104
6
8
12
12
12
10
10
13
13
13
26
31
31
31
36
20
25
25
25
26
14
19
19
19
24
C D E L F G H I J K M NSeccióncm2
F. daN100 Bar
CUADRO DE MEDIDASDIMENSION TABLE
NS
X2cantidad - quantity
modelo - model
NS-1000 25presión carga máximamaximum pressure load
carrera - stroke
100 Bar
EJEMPLO PEDIDO - ORDER EXAMPLE
PATENTE Nº 8.903.555
NITROGAS 114
MODELO-MODEL
CILINDROS COLECTIVOS CON PLACA BASECOLLECTIVE CYLINDERS WITH BASE PLATE
NSB
IMPORTANTE: Los cilindros tipo NSB deberán trabajar conexionados a un pulmón de compensación.
IMPORTANT: The NSB cylinders have to operate connected to a compensation lung.
PATENTE Nº 8.903.555
CompressionTANK
P. Control
EJEMPLO DE MONTAJEEXAMPLE OF ASSEMBLY
CARR
ERA
D
C
M
N
MN
A
L
BF
GST
ROKE
E
NITROGAS 115
MODELO-MODEL
LMODELOMODEL
25
38
50
75
100
150
25
38
50
75
100
150
25
38
50
75
100
150
25
38
50
75
100
150
25
38
50
75
100
150
1000
2000
3000
4000
5000
61,5
74,5
86,5
111,5
136,5
186,5
58,5
71,5
83,5
108,5
133,5
183,5
63,5
76,5
88,5
113,5
138,5
188,5
63,5
76,5
88,5
113,5
138,5
188,5
75,5
88,5
100,5
125,5
150,5
200,5
9,62
19,63
28,27
38,48
50,26
22
30
40
40
50
NSB-1000-25
NSB-1000-38
NSB-1000-50
NSB-1000-75
NSB-1000-100
NSB-1000-150
NSB-2000-25
NSB-2000-38
NSB-2000-50
NSB-2000-75
NSB-2000-100
NSB-2000-150
NSB-3000-25
NSB-3000-38
NSB-3000-50
NSB-3000-75
NSB-3000-100
NSB-3000-150
NSB-4000-25
NSB-4000-38
NSB-4000-50
NSB-4000-75
NSB-4000-100
NSB-4000-150
NSB-5000-25
NSB-5000-38
NSB-5000-50
NSB-5000-75
NSB-5000-100
NSB-5000-150
ACarreraStrokemm.
Seccióncm2
F. daN100 Bar. B C D E F G M N
1/2" 20ó
1/8" GAS
1/2" 20ó
1/8" GAS
1/2" 20ó
1/8" GAS
1/2" 20ó
1/8" GAS
1/2" 20ó
1/8" GAS
54
70
88
90
108
M8
M8
M10
M12
M12
35
40
43
43
50
15
18
18
18
20
70
89
108
127
128
54
70
80
89
97
125,5
151,5
175,5
225,5
275,5
375,5
127,5
153,5
177,5
227,5
277,5
377,5
135,5
161,5
185,5
235,5
285,5
385,5
135,5
161,5
185,5
235,5
285,5
385,5
155,5
181,5
205,5
255,5
305,5
405,5
CUADRO DE MEDIDASDIMENSION TABLE
NSB
X 75presión carga máximamaximum pressure load
carrera - stroke
100 Bar4cantidad - quantity
modelo - model
NSB-2000
EJEMPLO PEDIDO - ORDER EXAMPLE
PATENTE Nº 8.903.555
NITROGAS 116
MODELOS-MODELS
PULMONES DE COMPENSACIONCOMPENSATION TANK
= = ==
Jcm2
øF øK
ø1325
25 A H A 25
L
D
B
C
PC.10-PC.20-PC.30
MODELOMODEL
PC.10
PC.20
PC.30
A40
45
50
B115
155
255
C110
150
230
D 75
115
204
øF 86
120
194
Jcm2
58
113
296
øK101
140
219
Para hacer un cálculo de los pulmones de compensacióno placas colectoras, se tendrá en cuenta el volumen detrabajo de los cilindros en su desplazamiento.
In order to calculate the compensation tanks or collectorplates the working volume will be taken into account forthe cylinders over their range of movement.
Deberá indicarse el número de salidas, dependiendo dela cantidad de cilindros en conexión y en las caras que lodeseen.NOTA: NITROGAS le facilitará el pulmón más idóneo parasu trabajo. CONSULTENOS.
The number of outlets must be indicated, depending onthe number of cylinders connected and on the facesrequired.NOTE: NITROGAS will provide you with the ideal tank foryour work. CONSULT US.
PATENTE Nº 8.903.555
S = Sección del cilindro cm2
C = Carrera en cmN = Nº de cilindros
S x C x N x 100V = = Volumen
20V
H =Icm2
NITROGAS 117
CILINDROS CONEXIONADOSCONNECTED CYLINDERS
øB
25
øC
M8 x 5(min.)
12.5
58
3
Carre
raA
L
20
øR
75
H
E
D
G
F
MIN
IMES
S 12
15
Stro
ke
EJEMPLO DE MONTAJEEXAMPLE OF ASSEMBLY
NF-750, NF-1500, NF-3000, NF-5000
MODELOMODEL
CarreraStrokemm.
AF. InicialInitial Force
NF-750-12
NF-750-25
NF-750-38
NF-750-50
NF-750-63
NF-750-80
NF-750-100
NF-750-125
NF-750-160
NF-750-200
NF-1500-12
NF-1500-25
NF-1500-38
NF-1500-50
NF-1500-63
NF-1500-80
NF-1500-100
NF-1500-125
NF-1500-160
NF-1500-200
NF-3000-12
NF-3000-25
NF-3000-38
NF-3000-50
NF-3000-63
NF-3000-80
NF-3000-100
NF-3000-125
NF-3000-160
NF-3000-200
NF-5000-12
NF-5000-25
NF-5000-38
NF-5000-50
NF-5000-63
NF-5000-80
NF-5000-100
NF-5000-125
NF-5000-160
NF-5000-200
127
140
153
165
178
195
215
240
275
315
142
155
168
180
193
210
230
255
290
330
152
165
178
190
203
220
240
265
300
340
172
185
198
210
223
240
260
285
320
360
139
165
191
215
241
275
315
365
435
515
154
180
206
230
256
290
330
380
450
530
164
190
216
240
266
300
340
390
460
540
184
210
236
260
286
320
360
410
480
560
HGFEDøCøBøR
750
daN
1500
daN
3000
daN
5000
daN
12
25
38
50
63
80
100
125
160
200
12
25
38
50
63
80
100
125
160
200
12
25
38
50
63
80
100
125
160
200
12
25
38
50
63
80
100
125
160
200
25
36
50
65
50
75
95
120
9
11
13
13
37,5
50
60
70
75
95
115
135
56,5
73,5
92
109,5
75
100
120
140
95
120
140
160
L
PATENTE Nº 8.903.555
NITROGAS 118
MODELO-MODEL
EJEMPLO DE MONTAJEEXAMPLE OF ASSEMBLY
CILINDROS AUTONOMOS, CONVERTIBLES EN NO AUTONOMOSSELF-CONTAINED CYLINDERS CONVERTIBLE INTO NON SELF-CONTAINED CYLINDERS
CARR
ERA
G
D
B
I C
M
N
MN
L
F
A
3
E
STRO
KEH
Scre
w G
1/8"
Filling valve
AXPATENTE Nº 8.903.555
NITROGAS 119
MODELO-MODEL
MODELOMODEL
AX-750
AX-1500
AX-3000
AX-4000
AX-5000
AX-6500
GM-8x1,25
M-10x1,5
M-12x1,75
M-12x1,75
M-12x1,75
M-12x1,75
I15
15
20
20
20
25
M 70
105
135
150
150
190
N 54
79
108
120
120
156
C 9
11
13
13
13
13
HM-8
M-10
M-12
M-12
M-12
M-12
B 55
85
108
130
133
154
D25
36
50
60
65
75
E38
45
50
50
50
60
MODELOMODEL
Carrera en mm / Stroke mm
AX-750
AX-1500
AX-3000
AX-4000
AX-5000
AX-6500
A
F
L
A
F
L
A
F
L
A
F
L
A
F
L
A
F
L
62
87
125
60
85
130
55
80
130
70
95
145
70
95
145
75
100
160
75
113
151
73
111
156
68
106
156
83
121
171
83
121
171
88
126
186
87
137
175
85
135
180
80
130
180
95
145
195
95
145
195
100
150
210
117
197
235
115
195
240
110
190
240
125
205
255
125
205
255
130
210
270
137
237
275
135
235
280
130
230
280
145
245
295
145
245
295
150
250
310
162
287
325
160
285
330
155
280
330
170
295
345
170
295
345
175
300
360
197
357
395
195
355
400
190
350
400
205
365
415
205
365
415
210
370
430
237
437
475
235
435
480
230
430
480
245
445
495
245
445
495
250
450
510
287
537
575
285
535
580
280
530
580
295
545
595
295
545
595
300
550
610
337
637
675
335
635
680
330
630
680
345
645
695
345
645
695
350
650
710
25 38 50 80 100 125 160 200 250 300
CUADRO DE MEDIDASDIMENSION TABLE
AX
X3cantidad - quantity
modelo - model
AX-3000 38presión carga máximamaximum pressure load
carrera - stroke
150 Bar
EJEMPLO PEDIDO - ORDER EXAMPLE
PATENTE Nº 8.903.555
ACCE
SORIO
S
NITROGAS 122
Adaptador múltiple para la interconexión de cilindros a gas. Este sistema tiene la ventaja de unaunión desmontable sin pérdida de gas. Se puede acoplar a todos los cilindros con orificio de cargalateral con rosca G 1/8 .
DEFINICION:
Multiple adapter for connecting up gas cylinders. This system has the advantage of a union that maybe removed without loss of gas. It can be coupled up to all the cylinders which have a side loadinghole with a G 1/8 thread.
DEFINITION:
EJEMPLO PEDIDO:
1 Cilindro G-750 de carrera 50 mm, equipado conadaptador múltiple con conexión horizontal tipo “A”.
Código pedido:
1 G-750-50-A
ORDER EXAMPLE:
50 mm stroke G-750 cylinder, fitted with a multipleadapter, with a type “A” horizontal connection.
Order code:
1 G-750-50-A
PATENTE Nº 8.903.555
ADAPTADOR MULTIPLE MP-125MULTIPLE ADAPTER MP-125
42
50
70
30
G1/8"
25
18
Screw G1/8"
EJEMPLOS DE MONTAJE - EXAMPLE OF ASSEMBLY
Connection A Connection B Connection C Connection D
NITROGAS 123
PATENTE Nº 8.903.555
ACCESORIOSACCESSORIES
822
S 12
.65X
1.5
G1/
8"
SW14
RM-101Válvula de presión MINIMESSMINIMESS pressure valve
G1/
8"
20
G1/
8"
8
SW17
RM-103Racord a cilindroAdaptor to cylinder
25
G1/8"
3224
G1/
8"
SW17
RM-105Racord TT Connector
29
S 12,65X1,5
S 12,65X1,5
SW14
RM-109Conector para latiguillo flexibleConnector for flexible hose
G1/8"
812
ø14
SW5
RM-107TapónScrew
3224
G1/
8"
G1/8"
SW17
RM-106Racord 90ºConnector 90º
NITROGAS 124
MODELOMODEL
Longitud - Lengthmm.
LM1-200LM1-300LM1-400LM1-500LM1-630LM1-800LM1-1000LM1-1200LM1-1500LM1-2000LM1-2500LM1-3000
200300400500630800100012001500200025003000
MODELOMODEL
Longitud - Lengthmm.
LM2-200LM2-300LM2-400LM2-500LM2-630LM2-800LM2-1000LM2-1200LM2-1500LM2-2000LM2-2500LM2-3000
200300400500630800100012001500200025003000
MODELOMODEL
Longitud - Lengthmm.
LM3-200LM3-300LM3-400LM3-500LM3-630LM3-800LM3-1000LM3-1200LM3-1500LM3-2000LM3-2500LM3-3000
200300400500630800100012001500200025003000
PATENTE Nº 8.903.555
LATIGUILLOS DE CONEXION FLEXIBLESFLEXIBLE CONNECTION HOSES
17
ø20S 12,65X1,5
5
Longitud / Length
S 12,65X1,5 17
ø20
Longitud / Length
5
S 12,65X1,5
Longitud / Length
5
25
12M5
Abrazadera para latiguillo flexible
Flexible hose retainer
RM-108Longitud mínima de latiguillo = 200 mm.Minimum length for hoses = 200 mm.
Margen ±5 mm±5mm Margin
Longitudes menores, consultar al fabricanteFor shorter lengths, refer to the manufactu-rer.
NITROGAS 125
1/2-
20
22
G1/
8"
8
SW16
RM-102Racord a cilindroAdaptor to cylinder
1/2-20
24
1/2-
20
3527
SW16
RC-110Racord 90º90º Connector
1/2-
20
65
SW17
RC-112Conector para mangueraConnector for hose
1/2-
20
1/2-
20
31
23
SW16
RC-109Racord rectoRight connector
1/2-
20
1/2-20
48.2
35
27
SW16
RC-111Racord TT Connector
ø13.
5
ø6.3
MF-1/4Manguera (P. trabajo: 2750 PSI)Hose (working pressure: 2750 PSI)
PATENTE Nº 8.903.555
ACCESORIOSACCESSORIES
NITROGAS 126
CN-150
CN-250
CN-500
G-750
G-1500
G-3000
G-5000
CN-7500
Modelo PlacaPlate Model AMod. Cilindro
Cylinder Mod. B C D52
52
57
72
77
87
102
112
E F GSP-150
SP-250
SP-500
SP-750
SP-1500
SP-3000
SP-5000
SP-7500
27
27
32
37
52
62
82
102
12
12
12
15
15
15
20
20
7
7
7
9
9
9
11
11
11
11
11
15
15
15
18
18
32
32
40
48
56
66
72
85
8
8
14
14
30
40
56
75
750 daN
1500 daN
3000 daN
5000 daN
Modelo PlacaPlate Model DFuerza cilindro
Cylinder force
SC-750
SC-1500
SC-3000
SC-5000
20
30
44
58
H6
6
8
8
M8
H
D
PLACAS DE PRESION - PRESSURE PLATES
PLACA DE IMPACTO - IMPACT PLATE
PATENTE Nº 8.903.555
ACCESORIOSACCESSORIES
E
D
CB G
FA
EJEMPLO MONTAJE - EXAMPLE ASSEMBLY
Placa identificación PI-119-1
NITROGAS® PATENTE Nº 8.903.555Tel. +34-945-275544 - Fax: +34-945-268300
Preservar de choques, calor, proyecciones...
ATENCION: Util equipado con resortes a gas en:
MODELO_______________________CARRERA ___________CANTIDAD _____________________Carrera UTIL ________
Fuerza por cilindro _____________daNFuerza total de trabajo__________daNPRESION DE CARGA_______________bares
Nº RI 01/6557 FBG - 9127
Identification plate PI-119-2
NITROGAS® PATENT Nº 8.903.555Tel. +34-945-275544 - Fax: +34-945-268300
Protect against knocks, heat, dirt etc...
ATTENTION: Utility fitted with gas springs in:
MODEL ________________________STROKE ____________QUANTITY _____________________Useful stroke ________
Force per cylinder ______________daNTotal working force _____________daNLOADING PRESSURE ______________Bar
Nº RI 01/6557 FBG - 9127
Werkzeugplakette PI-119-3 Plaque d’Identification PI-119-4
NITROGAS® BREVET Nº 8.903.555Tel. +34-945-275544 - Fax: +34-945-268300
Protéger des chocs, de la chaleur, des projections...
ATENTION: Outil équipé de ressorts à gaz, sur:
MODÈLE_______________________COURSE ____________QUANTITÉ _____________________COURSE UTILE______
Force par cylindre ______________daNForce totale du travail __________daNPRESSION DE CHARGE ____________bar
Nº RI 01/6557 FBG - 9127
NITROGAS® PATENT- Nr. 8.903.555Tel. +34-945-275544 - Fax: +34-945-268300
Bitte Stöße, Hitzeeinwirkung, Schmutz etc. vermeiden!
ACHTUNG: Werkzeug ist mit folgenden Gasdruckfedern ausgestattet:
Typ ____________________Hublänge der Gasdruckfeder _______Menge_________________Arbeitshub___________________
Anfangskraft pro Gasdruckfeder ________daNGesamtanfangskraft ________________daNFÜLLDRUCK __________________________Bar
Nr. RI 01/6557 FBG - 9127
NITROGAS 127
6
1/2-20
10.5
SW17
TS-10Tapón de seguridadSafety plug
BD-M6-113Boquilla de descargaUnload nozzle
40 67
M6 M8
13 1625
25
62
2020
50
ER-01(M6)ER-02(M8)
ExtractoresExtractors
T-116Llave extracción válvulaValve extraction key
BD-1/8-114Boquilla de descargaUnload nozzle
G 1
/8’’
ø40 48
MP-122Manómetro presión (0-315 bar)Pressure gauge (0-315 bar)
PATENTE Nº 8.903.555
ACCESORIOSACCESSORIES
NITROGAS 128
23
8180
23 120
Válvula de llenadoFilling valve
Minimess Type 1620CEJN{
S 12,65X1,5
Screw G1/8"
PC-1-01PC-1-02
CODIGO DE PEDIDO - ORDER CODE:
PC-1-01con válvula de llenado MINIMESS
with MINIMS filling valve
PC-1-02con acoplamiento rápido CEJN
with CEJN filling valve
EJEMPLO DE MONTAJE - MOUNTING EXAMPLE:
23
8180
23 120
Válvula de llenadoFilling valve
Minimess Type 1620CEJN{
S 12,65X1,5
PC-4-01PC-4-02
ø34
56
74
G1/4"
SW27
P1
2 4
Contacto conmutable
P-200
PC-2
EJEMPLO DE MONTAJE - MOUNTING EXAMPLE:
PATENTE Nº 8.903.555
ACCESORIOSACCESSORIES
CODIGO DE PEDIDO - ORDER CODE:
PC-4-01con válvula de llenado MINIMESS
with MINIMS filling valve
PC-4-02con acoplamiento rápido CEJN
EJEMPLO DE MONTAJE - MOUNTING EXAMPLE:
P. Control
Se dispone de carcasa de protección frontal para todos los modelos de panel de control REF.: CPCWe also have a frontal protection carcass for all the models of the control panels REF.: CPC
NITROGAS 129
40 454510
0
Válvula de llenado CEJNFilling valve CEJN
78
34
Válvula de vaciadoEmptying valve
MINIMESS 1215
PANEL DE CONTROL MULTIPLE PCM-8Este dispositivo se hace necesario cuandose desea controlar separadamente la presiónde cada cilindro. Las unidades individualesestán conectadas mediante una línea a unmódulo del panel. El número de módulosdependerá del nº de cilindros o circuitos,siendo ocho el nº máximo.
MULTIPLE CONTROL PANEL PCM-8This device becomes necessary when thepressure of each cylinder has to becontrolled separately. The individual units areconnected to a panel module by means of aline. The number of modules depends on thenumber of cylinders or circuits, the maximumbeing eight.
PCM-8
25
15
155
135
303030
40
==
40
ø9Screw G1/8"
REGLETA DE DISTRIBUCION RD-12Particularmente útil, por ejemplo, en casosen que los espacios entre cilindros nopermite una fácil conexión con racores en“T”. Cada regleta permite conectar hasta 12cilindros. La conexión debe realizarsemediante válvulas de presión Minimess RM-101.
DISTRIBUTION BLOCK RD-12Particularly useful, for example, in instanceswhere the space between cylinders does notpermit an easy connection with a T-joint.Each block allows up to 12 cylinders to beconnected. The connection has to be carriedout with the use of Minimess clack valvesRM-101.
RD-12
EJEMPLO DE MONTAJE - MOUNTING EXAMPLE:
PATENTE Nº 8.903.555
ACCESORIOSACCESSORIES
EJEMPLO DE MONTAJE - MOUNTING EXAMPLE:
Se dispone de regletas con números diferentes de conexiones.We also have distribution blocks with different numbers of conections.
NITROGAS 130
EC-100 El EQUIPO DE CARGA EC-100 sirve para el llenado decilindros a gas autónomos. Se suministra con acoplamientode carga M6 y G 1/8 .
The EC-100 LOADING EQUIPMENT is used to fill upautomatic gas cylinders. It is supplied with an M6 and G 1/8loader fitting.
RP-106 El REGULADOR DE PRESION RP-106 sirve para el llenadode cilindros a gas autónomos. Permite tarar la presión desalida de la bombona.
The RP-106 PRESSURE REGULATOR is used for fillingautonomous gas cylinders. It allows the output pressure onthe pump to be balanced.
El EQUIPO DE CARGA ED-150 sirve para el llenado decilindros a gas colectivos, a través de la válvula de llenado delpanel de control de la instalación.
The ED-150 LOADING EQUIPMENT is used to fill collectivegas cylinders through filling valves on the installation’s controlpanel.
El COMPROBADOR-REDUCTOR DE PRESION CP-118comprueba o modifica reduciendo la presión de los cilindrosa gas autónomos, actuando sobre la válvula de llenado. Estaoperación puede realizarse en el mismo útil de trabajo.
Apto solo para cilindros de mas de 1000daN.
The CP-118 TESTER-PRESSURE REDUCER checks ormodifies by reducing the autonomous gas cylinder pressure,acting on the filling valve. This operation may be carried outon the working device itself.
Only Suitable for gas springs stronger than 1000 daNs.
ED-150
CP-118
PATENTE Nº 8.903.555
ACCESORIOSACCESSORIES
NITROGAS 131
PRENSA DE PRUEBAS P-117-01, P-117-02Este útil de medición de sobremesa sirve para verificar de unaforma rápida la fuerza de los cilindros a gas autónomos detodos los tipos y longitudes de carrera. La lectura de la fuerzase realiza a través de un manómetro digital o analítico.Código pedido: P-117-01 equipado con manómetro digital
P-117-02 equipado con manómetro analógico
P-117-01, P-117-02 TEST PRESSThis table-top measuring device is used to check, quickly andeasily, the force and stroke lengths of all types of autonomousgas cylinders. The force is displayed by means of a digital andanalogue manometer.Order code: P-117-01 equipment with digital manometer
P-117-02 equipment with analogue manometer
ER-01ER-02
EXTRACTOR ROSCADO para actuar sobre el pistón delcilindro en las operaciones de mantenimiento.
Código pedido: ER-01 espiga roscada M6ER-02 espiga roscada M8
THREADED EXTRACTOR for use on the cylinder piston inmaintenance operations.
Order code: ER-01 threaded handle M6ER-02 threaded handle M8
SPRAY DETECTOR DE FUGAS no corrosivo para fluidosgaseosos.
LEAK DETECTOR SPRAY non-corrosive for gaseous fluids.
Cada Kit incluye un juego completo de juntas deestanqueidad, una válvula de llenado, un anillo de retención,una guía de pistón y una botella de aceite de ensamblaje.Además se incluye instrucciones de mantenimiento.Ejemplo de pedido: Un kit de recambio para un cilindro
G-1500 de carrera 80 mm.Código pedido: KIT/G-1500
Each kit includes a complete set of joints, filling valve, aretaining ring, a piston guide and a bottle of assembly oil. Aswell as this it includes maintenance instructions.Example order: A spares kit for an 80 mm stroke G-1500
cylinder.Order code: KIT/G-1500
DF-01
KITS DE RECAMBIOSPARES KITS
P-117-01P-117-02
PATENTE Nº 8.903.555
ACCESORIOSACCESSORIES
NITROGAS 132
CD
-RO
M D
E M
AN
TE
NIM
IEN
TO
MA
INTE
NA
NC
E C
D-R
OM
En este CD-ROM se dan instrucciones detalladas paraayudar a realizar las operaciones de mantenimiento de losdiferentes modelos de cilindros a gas Nitrogas. Duraciónaproximada: 20 minutos.Código pedido Español: VMN-01Código pedido Inglés: VMN-02Código pedido Alemán: VMN-03Código pedido Francés: VMN-04
Detailed instructions for carrying out maintenance operationson various Nitrogas gas cylinders are given in this CD-ROM.Approximate running time 20 minutes.Order code Español: VMN-01Order code English: VMN-02Order code Deutsch: VMN-03Order code Française: VMN-04
Este CDrom contiene el catálogo de productos NITROGAS.Además, para facilitar el diseño de los útiles, una librería en2D y 3D, en formato DWG y DXF.
Código: NITROCAD.
This CD ROM contains the NITROGAS product catalogue. Inaddition to this there is also a 2D/3D library in DWG and DXFformat to assist in the desing of tool/utility layouts.
CODE: NITROCAD.
PATENTE Nº 8.903.555
ACCESORIOSACCESSORIES
DATOS TECNICOSMargen de graduación: 50 - 200 barFrecuencia de maniobra máxima: 200/min.Carga/Tensión: 4A/250V~Temperatura trabajo: -30ºC hasta +100ºC
TECHNICAL DATAGraduation margin: 50 - 200 BarMaximum switching frequency: 200/min.Current/Voltage: 4 A / 250Working temperature: -30ºC to +100ºC
El presostato permite el control permanente de lapresión de cilindros intercomunicados.Este dispositivo detecta la caída de presión a un nivelseleccionado, originando un impulso que accionaría laparada de máquina o una alarma
The pressurestat gives permanent control over thepressure of the interconnected cylinders. This devicedetects pressure drops of a selected magnitude;sending out a pulse which causes the machine toshutdown or setting off an alarm.
PRESOSTATO CON HISTERESIS AJUSTABLE P-200P-200 PRESSURESTAT WITH ADJUSTABLE HYSTERESIS
EJEMPLO DE MONTAJE - MOUNTING EXAMPLE:
ø3456
74
G1/4"
SW27
P1
2 4
Contacto conmutable
P-200
MAINTENANCE
DEU
TS
CH- ESPAÑOL - EN
GLIS
H
NIT
RO
GA
S