This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
466
INBO
ARD
18-5314CONTACT SET
Replaces: 2421820
18-5338CONDENSER
18-5347CONDENSER
Replaces: 1818757, 3420600
18-5345CONDENSER
Replaces: 2098058, 2279949
18-5403ROTOR
18-5404-1ROTOR
Replaces: 868096
18-5407ROTOR
Replaces: 1658535
CHRYSLER INBOARDIgnition System
18-5251TUNE-UP KIT
—CONTAINS— Part # Description 18-5314 Contact Set 18-5338 Condenser 18-5404 Rotor
Mallory 8 cyl. Tall Cap
18-5259TUNE-UP KIT
—CONTAINS— Part # Description 18-5303 Contact Set 18-5347 Condenser 18-5429 Rotor
Prestolite 6 & 8 cyl.
18-5260TUNE-UP KIT
—CONTAINS— Part # Description 18-5303 Contact Set 18-5345 Condenser 18-5403 Rotor
Prestolite 8 cyl.
18-5258TUNE-UP KIT
—CONTAINS— Part # Description 18-5303 Contact Set 18-5347 Condenser 18-5407 Rotor
Prestolite 8 cyl.
18-5303CONTACT SET
Replaces: 2421173, 2808870
18-5307CONTACT SET
Replaces: 2084074, 1274092, 2421178
18-5255TUNE-UP KIT
—CONTAINS— Part # Description 18-5303 Contact Set 18-5345 Condenser 18-5407 Rotor
Prestolite 8 cyl.
➀Items ending in "D" are Display Packaged - Regular number is Non-Display
➀18-5251D ➀18-5258D
➀18-5260D
467
INBOARDCHRYSLER INBOARD
Ignition System
Part # Description 18-5376 Distributor Cap 18-5404-1 Rotor 18-5491 Reluctor 18-5488 Module
★ Replaces points & condensers for true solid state ignition.★ Uses standard coil, cap and rotor.★ Easy to install, one-piece, 2-wire hook-up.★ Accurate to within 1/4° timing accuracy 0 to 6000 RPM range.★ Can be used with Flame Thrower Coil 18-5469
FEATURES
FEATURES★ Senses current levels in the coil and adjusts the dwell to maintain
peak energy throughout the entire RPM range.
★ Develops, on average, 4 times more available energy between 3000 and 5000 RPM’s and twice as much plug voltage as point-type systems.
★ Ignition energy is sustained and coil life is increased when peak current level is reached just prior to spark.
★ More stable timing. ★ Use with 18-5472 "Flame Thrower II" Coil for optimum performance
OE style boots provide a sealed barrier against heat, dirt and moisture.
469
INBOARDCHRYSLER INBOARD
Ignition System
18-5451COIL RESISTOR
Replaces: 3874767
18-5450COIL RESISTOR
Replaces: 4106140
18-5105IGNITION MODULEReplaces: 3874020
18-5103IGNITION PICKUPReplaces: 3780600
18-5102RELUCTOR
Replaces: 3656017
FEATURES★ Oil filled for better cooling and long life
★ Low resistance and improved turn ratios produces the higher voltage needed to run larger spark plug gaps for added power and better fuel economy
★ More windings maximize energy and reliability over the full RPM range
★ Fits existing brackets for easy installation
18-5469HI-PERFORMANCE IGNITION COIL3.0 ohm (oil filled), black - 4 & 6 cylinder: Flame-Thrower 40,000 volt coil. ★ Designed for use with the original Ignitor Electronic Conversion Kits★ Can be used with other inductive ignition systems
18-5472HI-PERFORMANCE IGNITION COIL0.6 ohm (oil filled), black - 4, 6, & 8 cylinder: Flame-Thower 45,000 volt coil.★Super low 0.6 ohm resistance coil designed for use with the Ignitor II Hi Performance Electronic Conversion Kits★Compatible with capacitive discharge systems
Recommended Resistance Sierra Part # Description Coil Ohms 18-5294 Electronic Conversion Kit 18-5469 3.0 18-5295 Electronic Conversion Kit 18-5469 3.0 18-5286 Hi Performance Electronic Conversion Kit 18-5472 0.6
18-5493PICK-UP COILReplacement pick-up coil for Accel Electronic Distributors
Model or Mfg. Carb. Carburetor Carb. Years Cyl. Engine Displacement Code Model Number Float Kit ➀
18-8114FUEL LINE HOSEUNIVERSALFor fuel pump to carburetor connection. Replaces copper or steel tubing 3/8" X 31" PTFE composite hose with 5/8"-18 male inverted flare straight one end, 5/8"-18 90° one end. SAE J1527 type A1
18-8115FUEL LINE HOSEUNIVERSALFor fuel pump to carburetor connection. Replaces copper or steel tubing 3/8" X 25" PTFE composite hose with 5/8"-18 male inverted flare straight one end, 5/8"-18 90° one end. SAE J1527 type A1
➁ Items ending in "D" are Display Packaged - Regular number is Non-Display
➁18-3551D
Sierra offers a complete line of 10 and 21 micron fuel water separating filters including drainable bowl filters to protect your carbureted and fuel injected engine.
Refer to pages 69-75 for a complete listing of OEM and universal applications.
Sierra fuel water separators remove over 99.8% of emulsified water from your gasoline. Sierra's 10 micron filters are over 90% efficient at removing particles as small as 10 micron. All filters
flow @ 90 GPH to feed even the hungriest motor. Sierra 10 micron filters are recommended to prevent damage to sensitive inboard and outboard fuel injection systems.
20 18-8528 STAINLESS STEEL N/A Use with Manifold: 18-1940. Included in 18-8527
STUD & NUT manifold mounting kit
CHRYSLER INBOARDCooling System
482
INBO
ARD
SIERRA MANIFOLDSARE PAINTED, PACKAGED AND LEAK TESTED
18-1940MANIFOLDPort & StarboardReplaces: 4142322, 3675826Fits: Chrysler Model 273, 318, 340 & 360 CID engines (1973-1986)Use with: End Cap Gasket: 18-2941 Open or 18-0472 Blocked Mounting Kit: 18-4360 Open or 18-4361 Open or 18-8506 Blocked End Plate: 18-1941 Blocked or 18-1942 OpenNote: If using a blocked end plate either gasket will work. If using an open end plate use only an open gasket.
18-1915MANIFOLDPort & StarboardReplaces: Chrysler E7081M, 3619659Fits: 383-440 cu.in. Chrysler big block V8Use with: Exhaust Manifold Gasket: 18-0474 Mounting Kit: 18-8517 Front Plate: 18-1911
18-1945RISERReplaces: 2846689Fits: Chrysler Model 273, 318, 340 & 360 CID engines (1966-1986)Use with: Manifold: 18-1940 Riser Gasket: 18-2941 open or 18-0472 blocked Mounting Kit: 18-4361 open or 18-4360 open or 18-8506 blocked
18-1944RISERReplaces: 2847404, 2847623, 3745639, E9923MChrysler Small Block V8 318-360cu.in. (All models 1966 and up with swivel exhaust), Big Block V8 383-440cu.in. (All models except 413"E" with offset bolt pattern)Use with: Manifold: 18-1940 Mounting Kit: 18-8518
18-1939RISERReplaces: Barr 20-0100, Marine Power 0992-593 Barr, Indmar and Marine Power Ford Small Block V8 302-351 cu.in., GM Small Block V8 305-350cu.in., GM Big Block V8 454cu.in.Use with: Manifold: 18-1997-1 or 18-1998-1 or 18-1898 Riser Gasket: 18-2854 open or 18-0476 blocked Mounting Kit: 18-4364 open or 18-8535 blocked
18-1997-1MANIFOLD Port & StarboardReplaces: Barr CHV-1-83 Universal Center Riser ManifoldFITS:Chriscraft 283, 302, 307 and 350 CID enginesCrusader 283 and 327 CID engines thru 1964; 305, 307 and 350 CID engines 1965 and laterDaytona 200-283 and 300-327Flagship 283, 327 and 350 CID enginesPacer 305, 307 and 350 CID engines 1965 and laterMercury 190, 198, 225, 250, 270, 228, 898, 260, 255 and 280 modelsOMC 283, 305, 307 and 350 CID engines 1968-1980 Volvo 307 and 350 CID enginesUse 18-0604 Exhaust Manifold Gasket Set*For Exploded View - See Pages 542-543
18-1898MANIFOLDPort & StarboardReplaces: Barr CHVA-1-84, Marine Power 0991-110Fits 454 cu.in. GM big block V8 enginesUse with: Exhaust Manifold Gasket: 18-0418*For Exploded View - See Pages 540-541
CHRYSLER INBOARDCooling System
483
INBOARD
18-1946ELBOWReplaces: 3527794Fits Chrysler Model 273, 318, 340 & 360 CID engines (1966-1986) will work in conjunction with 18-1945Use with: Manifold: 18-1940 Elbow Gasket: 18-2941 open or 18-0472 blocked Mounting Kit: 18-4360 open or 18-4361 open or 18-8506 blocked20°
18-1948 ELBOW Replaces: Chrysler E9234MChrysler Big Block V8 383-440cu.in. (All Models except 413"E" with offset bolt pattern)Use with: Manifold: 18-1915 Elbow Gasket: 18-0471 Mounting Kit: 18-8501
18-1911 MANIFOLD END PLATE Chrysler Big Block V8 383-440cu.in. (All Models except 413"E" w/offset bolt pattern) Used with: Manifold: 18-1915 Front/End Plate Gasket: 18-0471 Mounting Kit: 18-8501
18-1913 ELBOWReplaces: Chrysler 2469639, 2847405Chrysler Small Block V8 318-360 cu.in. (All Models 1966 and up with fixed exhaust) For: 18-1940 Manifold will work in conjunction with 18-1945Use with: Elbow Gasket: 18-2941 open or 18-0472 blocked Mounting Kit: 18-4360 open or 18-4361 open or 18-8506 blocked
18-1907RISERReplaces: Barr 20-0102, Indmar 53-2009, 53-2018Barr and Indmar Ford Small Block V8 302-351cu.in.Use with: Manifold: 18-1997-1 or 18-1998-1 Riser Gasket: 18-2854 open or 18-0476 blocked Mounting Kit: 18-4364 open or 18-8535 blocked
18-1942MANIFOLD END PLATEwith holeReplaces: 24695566, 3675826Use with: End Plate Gasket: 18-2941 Mounting Kit: 18-4360 or 18-4361Fits: 18-1940 Manifold
18-1941MANIFOLD END PLATEReplaces: 2846106Use with: End Plate Gasket: 18-2941 open or 18-0472 blocked Mounting Kit: 18-4360 open or 18-4361 open or 18-8506 blocked
18-0471 ELBOW GASKET Used with: Manifold: 18-1915 Port & Starboard Elbow: 18-1948 End Plate: 18-1911
PKG. OF 2
18-2941 (Open)18-2941-9➀END CAP GASKETReplaces: 2847480, 2469559Use with: End Plate: 18-1941, 18-1942 Riser/Elbow: 18-1945, 18-1946, 18-1913For: 318CID Engines
18-4361 (Open)EXHAUST ELBOW MOUNTING KITUse with: End Plate: 18-1942 open or 18-1941 blocked Riser: 18-1945 Elbow: 18-1946, 18-1913
➁18-4218D
➀ Priced per Package➁ Items ending in "D" are Display Packaged - Regular number is Non-Display
CHRYSLER INBOARDCooling System
485
INBOARDCHRYSLER INBOARD
Cooling System
18-8527 EXHAUST MANIFOLD MOUNTING KITChrysler Small Block V8 318-360cu.in. (All models 1966 and up with swivel and fixed exhaust) Used with: Manifold: 18-1940 (Kit has stainless steel studs and nuts)
18-8526 EXHAUST MANIFOLD MOUNTING KITChrysler Small Block V8 318-360cu.in. (All models 1966 and up with swivel and fixed exhaust) Used with: Manifold: 18-1940
18-8535 EXHAUST ELBOW MOUNTING KITBarr, Indmar and Marine Power Ford Small Block V8 302-351cu.in., GM Small Block V8 305-350cu.in., GM Big Block V8 454cu.in. Used with: Risers: 18-1939, 18-1999, and 18-1907
18-8536 EXHAUST ELBOW MOUNTING KITBarr, Indmar and Marine Power GM Small Block V8 305-350cu.in. Used with: Manifold: 18-1997-1
18-8538 EXHAUST MANIFOLD MOUNTING KITBarr and Indmar Ford Small Block V8 302-351cu.in. Used with: Manifold: 18-1998-1
18-8528 STAINLESS STEEL STUD & NUT Chrysler Small Block V8 318-360cu.in. (All models 1966 and up with swivel and fixed exhaust)Used with: Manifold: 18-1940 (Stainless steel studs and nuts only)
18-8518 EXHAUST ELBOW MOUNTING KITChrysler Small Block V8 318-360cu.in. (All models 1966 and up with swivel exhaust), Big Block V8 383-440cu.in. (All models except 413 "E" with offset bolt pattern)Used with: Riser: 18-1944
18-8501 EXHAUST ELBOW MOUNTING KIT Chrysler Big Block V8 383-440 cu.in. (Models: All except 413 "E" with offset bolt pattern) Used with: Front Plate: 18-1911 Elbow: 18-1948
18-8506 EXHAUST ELBOW MOUNTING KITChrysler Small Block V8 318-360 cu.in. (All models 1966 and up with swivel and fixed exhaust)Used with: Riser: 18-1945 Elbow: 18-1946, 18-1913 End Plate: 18-1941 blocked