This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Year
CID Lit.
Bore Vin#
Description
Short Block
Complete
Block Casting
Crank Forging
Head Casting
Crank Kit No.
CHRYSLER CORPORATION CHRYSLER - DODGE - PLYMOUTH 4 & 6 CYLINDER PASSENGER "OHV" & "OHC" Acclaim, Aries, Aspen, Caravelle, Challenger, Charger, Cordoba, Coronet, Dart, Daytona, Demon, Diplomat, Dynasty, Duster, E-Class, Fifth Avenue, Fury, Grand Fury, Horizon, Lancer, Lazer, LeBaron, LeBaron GTS, Magnum, Mirada, Newport, New Yorker, Omni, Peugeot, Rampage, Reliant, Royal, Salon, Scamp, Shadow, Shelby Charger, Spirit, Stealth, Sundance, TC, TC-3, Town & Country, Turismo, Valiant, Volare, 024, 300, 400, 600 (Includes Eagles after 1988) SEE NOTE AT END OF SECTION 1997-96 231
3.8 3.780
L OHV, FWD, FI, Roller Lifters, Det. Sensor on left side,Minivan
134701 134711 4621944 4556433 4621510 23153
1995-94 231 3.8
3.780 L
OHV, Roller Tappets 134700 134710 4556430 4621763
6433 4621510 23153
1993-92 231 3.8
3.780 L
V6, OHV, S.E.F.I., 5th Avenue, Imperial
133900 133910 3654 23152
1991-90 231 3.8
3.780 L
V6, OHV, E.F.I., 5th Avenue, Imperial
133800 133810 4556430 4556433 4448015 23152
1983-81 225 3.7
3.40 F
Cast Shaft, Hyd. Lifters, Crankshaft Centering Ring is 2.157"
132400 132413 4095246 4095778 23125
1980-75 225 3.7
3.40 C/D
Cast Shaft, Mech. Lifters, Crankshaft Centering Ring is 2.157" W/A.I.R. order 132313
132300 132310 3698966 7501366
4027600-5 3698447-1 4104362
23123
1974-67 225 3.7
3.40 C
When Unit is used W/A904 Trans. Assembly #3515827, Chrysler Part #2515608 Sleeve should be used in Crankshaft Pilot Hole, Crankshaft Centering Ring is 2.157"
131700 131710 2463430 2806830 2205528 2202857
2658998 2843935 3769307
2843169 2128654 2202952 2206035
23120
1967-60 225 3.7
3.40 A904 Trans., Crankshaft Centering Ring is 1.962"
NOTE: Engines with A.I.R., Smog, order from factory. NOTE: Information for the following engines 1974-61, 170-198; 1954-46, 237-251-265 can be found in the Miscellaneous Listing on Page 101 & 102. ARROW - CHALLENGER - CHAMP - COLT - COLT VISTA - COLT WAGON - CONQUEST - SAPPORO 1989-85 156
2600cc,, OHC, RWD, W/Air Jet Valves, Bell Hsg. Dowel Pin Holes are 13 1/2" Between Centers
457900ABC 457910B* G54 33111A
1980 156 2.6
3.586 W
2600cc,, OHC, RWD, W/Air Jet Valves
457700ABC 457710B* G54B G54 33111A
1980-76 156 2.6
3.586 F
2600cc,, OHC, RWD, W/Air Jet Valves, Bell Hsg. Dowel Pin Holes are 12 1/2" Between Centers
457600ABC 457610B* G54B G54 33110A
1980-76 156 2.6
3.586 F
2600cc,, OHC, Bell Hsg. Dowel Pin Holes are 13 1/2" Between Centers
457500ABC 457510B* G54B G54 33109A
A - Bottom two bell housing bolts on block are straight across off the oil pan. Specify if 12 1/2" or 13 1/2". Specify if block has any vent tubes on side. Specify if for automatic or standard transmission. Automatic transmission has a bushing in the rear of the crank that forms a centering ring. Standard transmission does not have this type of bushing, and rear of crank is flat. B - Specify if semi-circle opening on valve cover sealing rail in front of head measures 1 5/16" or 2 1/8" across. C - Call factory for DOHC engine. * Do not come with oil pump or kit.
Year
CID Lit.
Bore Vin#
Description
Short Block
Complete
Block Casting
Crank Forging
Head Casting
Crank Kit No.
12
ARROW - CHALLENGER - CHAMP - COLT - COLT VISTA - COLT WAGON - CONQUEST - SAPPORO Continued SEE NOTE AT END OF SECTION 1994-93 143
2.4 3.41 OHC, Hyd. Adjusters, Vista 453900 453910 33162
1992 143 2.4
3.41 OHC, Hyd Adjusters 453800 453810 33162
1994-92 122 2.0
3.346 F/U
FWD, DOHC, Turbo, Laser After 4-3-92, 16 Valve, MMC
457700 457710 4G63 4G63B
63GC 63GU
33157
1994-92 122 2.0
3.346 R/E
FWD, DOHC, W/O Turbo,Laser After 4-3-92, 16 Valve, MMC
457800 457810 4G63 4G63B
63GC 63GU
33157
1992-90 122 2.0
3.346 R
FWD, DOHC, W/Balance Shaft, Laser before 4-3-92, 16 Valve
456800 456810 4G63 4G63B
63GC 63GU
33157
1992-90 122 2.0
3.346 U
FWD, DOHC, Turbo, Laser Before 4-3-92, 16 Valve, MMC
456900 456910 4G63 4G63B
63GC 63GU
33157
1991-90 122 2.0
3.346 V
2000cc, OHC, M.F.I., Dual Balance Shafts
456700ABC 456710* 33157
1989 122 2.0
3.346 V
2000cc, OHC, M.F.I., Dual Balance Shafts
456600ABC 456610* 33157
1988 122 2.0
3.346 D
2000cc, OHC, Belt Drive, 2 B.C., Hyd. Valve Adjusters
456500 456510* 33157
1987 122 2.0
3.346 D
2000cc, OHC, Belt Drive, 2 B.C., Hyd. Valve Adjusters
456400 456410* G63 33157
1986-85 122 2.0
3.346 D
2000cc, OHC, Belt Drive 456100 456110* G63 33157
1984-83 122 2.0
3.346 5
2000cc, OHC, Belt Drive 456000 456010* G62 33157
1982-78 122 2.0
3.31 5
2000cc, OHC, W/O Air Jet Valve, Bell Housing Dowel Pin Holes are 12 1/2" Between Centers
455400A 455410A G52 33106A
1982-78 122 2.0
3.31 5
2000cc, OHC, W Air Jet Valve, Bell Housing Dowel Pin Holes are 12 1/2" Between Centers
455400A 455510A* G52 33106A
1978-76 122 2.0
3.31 5
2000cc, OHC, W/O Air Jet Valve, Bell Housing Dowel Pin Holes are 13 1/2" Between Centers
455200A 455210A* G52 33105A
1978-76 122 2.0
3.31 U
2000cc, OHC, W Air Jet Valve, Bell Housing Dowel Pin Holes are 13 1/2" Between Centers
455200A 455310A* G52 33105A
1975-74 122 2.0
3.31 U
2000cc, OHC 455100 455110* 52A G52 33105
1995-94 110 1.8
3.189 C
OHC, Roller Rockers W/Screw Adjusters
452600 452610* 4G93 33107
1993-90 110 1.8
3.189 D/B
1800cc, OHC, Auto Trans., M.P.I., Dual Balance Shafts, Colt, Colt Vista
1800cc, OHC, M.P.I., Dual Bal. Shafts Colt, Colt Vista
454700 454710* 4G93 33108
A - Bottom two bell housing bolts on block are straight across off the oil pan. Specify if 12 1/2" or 13 1/2". Specify if block has any vent tubes on side. Specify if for automatic or standard transmission. Automatic transmission has a bushing in the rear of the crank that forms a centering ring. Standard transmission does not have this type of bushing, and rear of crank is flat. * Do not come with oil pump or kit.
Year
CID Lit.
Bore Vin#
Description
Short Block
Complete
Block Casting
Crank Forging
Head Casting
Crank Kit No.
13
ARROW - CHALLENGER - CHAMP - COLT - COLT VISTA - COLT WAGON - CONQUEST - SAPPORO Continued SEE NOTE AT END OF SECTION 1990 98
NOTE: Must get I.D. stamping on the head surface (i.e. 2A, 2D, 2F, 2H, 52A, 52B, 54A) on top right front of block. See drawing below.
A - LC engines are without air jet valves. LA engines are with air jet valves, call the factory. * Do not come with oil pump or kit.
Year
CID Lit.
Bore Vin#
Description
Short Block
Complete
Block Casting
Crank Forging
Head Casting
Crank Kit No.
14
CHRYSLER - DODGE - PLYMOUTH - 6 CYLINDER - PASSENGER "L" HEAD 1959-57 230
3.8 3.25 Long Center Sump Pan, Side
Mounts XX 133210B 1484929 1557708 1676337 23122A
23115A 1959-55 230
3.8 3.25 Short Center Sump Pan, High
Mount XX 133110B 1484929 1557708 1616823 23122A
23115A 1959-42 230
3.8 3.25 XX 133010B 1119729
1326299 1484929
868929 1557708
1311804 1120803 1405849
23122A
23115A
1954-42 218 3.6
3.25 4 Hole Crankshaft XX 220010B 1119729 1326299
952068 856080
1326304 1311810 1120803
23118
1954-42 218 3.6
3.25 Hi-Drive Transmission, 8 Hole Crankshaft
XX 220110B 1326299 1484929
1316540 864719
1326304 23114
A - 23122 will have a 3/4" pulley bolt, 23115 will have a 1 1/8" pulley bolt. B - Oil pump not supplied. CHRYSLER - DODGE - PLYMOUTH V8 & V10 PASSENGER "OHV" Aspen,Barracuda,Challenger,Charger,Cordoba,Coronet,Dart,Demon,Diplomat,Duster,Fifth Avenue,Fury,Imperial,LeBaron, Magnum,Mirada,Monaco,Newport,New Yorker,Polora,Roadrunner,St. Regis,Satellite,Sebring,Valiant,Viper,Volare SEE NOTE AT END OF SECTION 1993-92 488 4.00 V10, OHV, E.F.I., Viper XX XX XX
Exc. E-48 Engine, Mtg. Bolt Hole for Brace from Trans. Bell Housing to Eng. Block is 10" on Left Side From Rear of Block
220300 220413 4179730 4104230
3462387 2658393 3751841
4027593 4027163 3769973
23135
1984-80 318 5.2
3.91 H/R
E-48 Engine, Mtg. Bolt Hole for Brace from Trans. Bell Housing to Eng. Block is 10" on Left Side From Rear of Block
220300 220413 4179730 4104230
3462387 2658393 3751841
3671587 4027596
23135
1984-80 318 5.2
3.91 H/R
E-48 Engine, Mtg. Bolt Hole for Brace from Trans. Bell Housing to Eng. Block is 9" on Left Side From Rear of Block
226200 226413B 4179730 4104230 4006730
3462387 2658393 3751841
3671587 4027596
23135
1984-76 318 5.2
3.91 G/P
Exc E-48 Engine, Mtg. Bolt Hole for Brace from Trans. Bell Housing to Eng. Block is 9" on Left Side From Rear of Block
226200 226213B 4104230 4006730
3462387 2658393 3751841
4027163 3769973 3671585 3751851 4027593
23135
1975 318 5.2
3.91 G
220200 220910 2806030 2536030
2843868 2128869 2532457
3769973 3671585 4027593
23135
1975-67 318 5.2
3.91 F/G
226200 220210 2806030 2536030
2843868 2128869
2843675 2658920
23135
A - To identify cast or forged crankshaft, see drawing on page 16. B - See page 23 to identify heads. NOTE: Standard performance engines only. NOTE: Engines with A.I.R., Smog, order from factory. NOTE: Information for the following engines, 1972-71, 400; 1965-59, 361-383-413; 1969-64, 273; 1966-57, 318 can be found in the Miscellaneous Listing on page 101 & 102.
Year
CID Lit.
Bore Vin#
Description
Short Block
Complete
Block Casting
Crank Forging
Head Casting
Crank Kit No.
16
DODGE 6 CYLINDER TRUCK "L" HEAD & INDUSTRIAL 1965-61 265
4.3 3.438 Head approx. 25" Long, Full
Flow Filter XX 138710A 1400229 870744
1400188 1120805 1120806 1632430
23101B Shaft With #1400188
1960-53 265 4.3
3.438 Head approx. 25" Long, Non Full Flow Filter
XX 138510A 1400229 1400188 870744
1120805 1120806 1632430
23100B Shaft With #870744
1960-48 251 4.1
3.438 Head approx. 25" Long XX 136610A 1138129 1400229 1115829
864718 870715 1400188
1120805 1120806 1120903
23108B Shaft With #864718 #870715
1960-49 230 3.8
3.25 Head approx. 23" Long 8 Hole Crankshaft
XX 136410A 1484929 1326229 1119729
1557708 868929
1311804 1326386 1405849 1616823 1676337
23122C 23115C
1948-42 230 3.8
3.25 Head approx. 23" Long 8 Hole Crankshaft
XX 133010A 1119729 1326229 1484929
868929 1557708
1120804 1311804 1326386 1405849 1616823 1676337
23122C 23115C
1954-42 218 3.6
3.25 Head approx. 23" Long 4 Hole Crankshaft
XX 136210A 1119729 1326229
856080 952068
1120803 1311810 1326306
23118
A - Includes head & gaskets - no oil pump. B - Replacement crankshaft must have same casting number as crankshaft being removed from engine. C - 23122 will have 3/4" pulley bolt, 23115 will have 1 1/8" pulley bolt.
Year
CID Lit.
Bore Vin#
Description
Short Block
Complete
Block Casting
Crank Forging
Head Casting
Crank Kit No.
17
DODGE 4 & 6 CYLINDER TRUCK & INDUSTRIAL "OHV" & "OHC" Arrow, Caravan, D-Series, D-50, Dakota, Mini Ram, Ram Charger, Raider, Rampage, Scamp, Trail Duster, Voyager, W-Series SEE NOTE AT END OF SECTION 1998-92 238
2500cc, OHC, FWD, Roller Rockers, W/Bal. Assembly, Caravan, Voyager, Mini Ram Van
222900 222910* 23142
1990-89 153 2.5
3.445 J
2500cc, OHC, FWD, Roller Rockers, W/Bal. Assembly, Turbocharged, Caravan, Voyager, Mini Ram Van
225100 225110* 4315730 4448486 4105782 23143
A - Bottom two bell housing bolt holes are straight off the oil pan rail. Specify if the bottom two bell housing bolt holes on block are 12 1/2" or 13 1/2" center to center. B - Specify if semi-circle opening in front of head along valve cover rail measures 1 5/16" or 2 1/8" across. C - Specify if for automatic transmission or standard transmission. Automatic transmission has bushing in rear of crankshaft forming centering ring. Standard transmission does not use the bushing and rear of crankshaft is flat. * Do not come with oil pump or kit.
Year
CID Lit.
Bore Vin#
Description
Short Block
Complete
Block Casting
Crank Forging
Head Casting
Crank Kit No.
19
DODGE 4 & 6 CYLINDER TRUCK & INDUSTRIAL "OHV" & "OHC" Continued SEE NOTE AT END OF SECTION 1995-89 153
2.5 3.445
K 2500cc, OHC, FWD, Roller Rockers, W/Bal. Assembly, Caravan, Voyager, Mini Ram Van
A- To identify cast or forged crankshafts, see drawing on page 16. B - Engine can be identified by letters designated as shown in quote marks. This letter is the fourth alpha on the model serial plate. The engine will also be stamped with numbers (Example: 361-2). This number may be stamped on pad of engine block at front of head surface.
Year
CID Lit.
Bore Vin#
Description
Short Block
Complete
Block Casting
Crank Forging
Head Casting
Crank Kit No.
21
DODGE V8 TRUCK & INDUSTRIAL Continued SEE NOTE AT END OF SECTION 1990-89 360
5.9 4.00
Z Roller Tappets 225200 225213B 4315830
53006921 4027169 3418640
4323352 4343923 4343646 4448308
23124
1989-75 360 5.9
4.00 I/W/S
All Trucks, Vans (Inc. 1978-76 D500, 600), 14mm Spark Plugs W/A.I.R. ORDER 225613 W/LP Gas ORDER 225612 W/LP Gas & AIR 225614
Mtg. Bolt for Brace from Trans. Bell Housing to Engine Block is 10" on Left Side From Rear of Block LP Gas ORDER 226014
220300A 226013AB 4179730 4104230
3462387 2658393
4027593 4027163
23135
1984-68 318 5.2
3.91 P/E
Mtg. Bolt for Brace from Trans. Bell Housing to Engine Block is 9" on Left Side From Rear of Block W/A.I.R. ORDER 220713 W/LP Gas 220712 W/LP Gas & AIR 220714
226200A 220710AB 4006730 4104230 4179730
3751841 3462387 2658393
4027163 3769973 3671585 4027593 3751851
23135
A - Specify if standard or automatic transmission. B - Check picture on page 23 for correct cylinder head identification.
Year
CID Lit.
Bore Vin#
Description
Short Block
Complete
Block Casting
Crank Forging
Head Casting
Crank Kit No.
22
DODGE V8 TRUCK & INDUSTRIAL Continued SEE NOTE AT END OF SECTION 1978-70 318
5.2 3.91
E Water Heated Intake Manifold 226200 223510B 4006730
4179730 3751841 3462387 2658393
2658234 3870277 2658416
23135
1975 318 5.2
3.91 E
W/AIR 227313 W/LP Gas 227312 W/LP & AIR 227314
226200A 227310A 2536030 2806030
2843868 2128869
3769973 3671585 4027593
23121
1974-67 318 5.2
3.91 E
Rear Sump Pan 226200A 224810A 2536030 2843868 2128869
2658920 2843675
23121
NOTE: Engines with A.I.R., Smog order from factory. NOTE: Information on 1967-57, 318; 1972, 400; Dodge Truck Engines can be found in the Miscellaneous Listing on page 101 & 102. NOTE: No timing components or oil pumps supplied with 4 and 6 cylinder engines, excluding 225 slant 6 and timing components on 3.9L V6. A - Specify if standard or automatic transmission. B - Check picture on page 23 for correct cylinder head identification. C - Casting #53006671 has bolt down rockers, engine oils through push rods.