Chip-Type Ceramic Secondary Battery ・ LiCoO2 ceramic plate with high-speed Li ion conductivity by crystal orientation. The battery is packaged with all-ceramic stacked monolithic body with a minimal amount of liquid electrolyte. Smart card IoT module Bluetooth solar powered watch On-board power source Oriented electrode plate Organic electrolyte Ultra-thin 0.45mm thick, bendable battery that can be embedded in IC cards, and similar products. ・Coin-shaped battery (thickness of 1mm or more) that can be mounted on a circuit board using reflow soldering ・Can accommodate hot lamination in card production. ・Constant voltage charging is possible, which eliminates the need for charger IC. ・High-speed charging is possible from non-contact card readers. Negative electrode Technology + terminal - terminal EnerCera ® Pouch EnerCera ® Coin Ultra-compact Lithium-ion rechargeable battery suitable to be used for power source for loT devices, etc. Proprietary crystal orientation ceramic plate is applied to the electrode to achieve a smaller, thinner, high capacity, low internal resistance, and high heat resistance. The battery can output large current, up to several 100mA, necessary for operating ICs, sensors and wireless communication. ◆ Oriented Electrode Plate ◆ Semi-Solid State Battery (EnerCera Coin) EnerCera ® Series https://www.ngk-insulators.com ○ c 2020 NGK INSULATORS, LTD.