Chinese Ceramics Communications Selected, peer reviewed papers from the Sixth China International Conference on High-Performance Ceramics (CICC-6), Harbin, China, August 16- 19, 2009 Edited by Wei Pan and Jianghong Gong %) TRANS TECH PUBLICATIONS LTD Switzerland • UK • USA
13
Embed
Chinese Ceramics Communications · ChineseCeramics Communications Selected, peerreviewed papersfromthe Sixth China International Conferenceon High-Performance Ceramics (CICC-6), Harbin,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Chinese Ceramics
Communications
Selected, peer reviewed papers from the
Sixth China International Conference on
High-Performance Ceramics (CICC-6),Harbin, China, August 16- 19, 2009
Edited by
Wei Pan and Jianghong Gong
%) TRANS TECH PUBLICATIONS LTD
Switzerland • UK • USA
Table of Contents
Preface v
Committees vi
Changes in Microstructures and Properties of Al203/Zr02 (Y2O3) with Different
Content ofZr02C.Z. Pan, L. Zhang, Z.M. Zhao, Z.S. Qu, Q. Yang and X.G. Huang 1
Influences ofSi02 on Densification and Properties of Large Bulk Al203/Zr02 (4Y) Eutectics
Q. Yang, Z.M. Zhao, L. Zhang, C.Z. Pan, Z.S. Qu and M.Q. Wang 5
Influence of Holding Time on the Properties of Alumina-Aluminium Titanate Fiber
J.N. Zhou, X.B. Hu, S.H. Wang, Y.Q. Wang and X.Z. Zhang 9
Investigation on A1203/YSZ Eutectic Ceramics Lining in the Pipes Prepared
by Combustion SynthesisB.C. Xu, L. Zhang, CM. Wang and R.X. Duan 12
Preparation of Fc Coating AI2O3 Nanometer Composite Powder and its Mechanical
Properties after Hot Press SinteringH.X. Lu, W. Zhang, R. Zhang, H.L. Xu, H.L. Wang, D.L. Chen and D.Y. Yang 16
Sintering of High-Strength Dense A1203 Using Rod-Like Submicron A1203 as Sintering Aid
Y.Q. Wang, Q.B. Chang and J.N. Zhou 20
Properties and Structure of Micro Porous Mullite-Corundum Refractorywith High Strength
J. Wu, D.Y. Yang, K. Zhu and R. Zhang 23
Effects of Sintering Additives on the Microstructure and Mechanical Properties of Silicon
Nitride Ceramics by GPS
W.R. Zhang, F. Sun, T.Y. Tian, X.H. Teng, M.C. Ru and Y. Ding 27
Fabrication of SiC/Ti3SiC2/TiC Ceramic Composites by Pressureless Sintering
of3TiC/2.2Si/0.2Al
B.Y. Liang, X. Han, Q. Zou and M.Z. Wang 31
A Fracture Dynamics Model for Fiber Reinforced Ceramics
N.C. LU, Y.H. Cheng and Y.T. Wang 34
Preparation and Characterization of Polycrystalline Cubic Boron Nitride (PcBN) Compactsby a Pressureless Sintering Process
Z.H. Ren, R. Zhang, H.L. Wang, D.L, Chen and M.L. Li 38
Effect of Sm203 Additives on the Rod-Like p-Si3N4 Crystal of Porous Silicon Nitride
Fabricated by Reaction-Bonded
J.S. Yue and H.J. Wang 42
Morphology ofIn Situ VC Ceramics in High Speed Steel with High Vanadium Content
L.J. Xu, H.M. Chen, S.Z. Wei and R. Long 46
Surface Microhardness and Flexural Strength of Colored Zirconia
Q. Liu, L.Q. Shao, N. Wen and B. Deng 49
Preparation of Ti(C,N)-Based Cermets
X.Y. Gu, S.Z. Lv, Y.X. Chen and H.Y. Xu 51
Size Dependent Stiffness of Composite Ceramic with Partial Debonding InterphaseX.Q. Liu, B.F. Li, L. Zhao and G.H. Zhong 55
Mechanism Analysis of Synthesizing Fe-Si3N4 by Flash-Combusting FeSi75
J.H. Chen, B. Li, L.Y. Yu and W. Song 59
Effect of Silicon Addition on the Properties and Microstructure of
Corundum-Mullite RefractoryX.H. Wei, Y.J. Wang, H.X. Li and J.L. Sun 63
viii Chinese Ceramics Communications
Properties of Composite Ceramic Coatings on Ti-6Al-4V Alloy by Surface
Nanocrystallization/Micro-Arc Oxidation
G.D. Hao, Y.L. Guo, G. Liu and X.M. Zhang 67
Preparation and Characterization of SiC/MoSi2 Composites from Powder Resulting from a
Mechanical-Assistant Combustion Synthesis Method
J.G. Xu, H.Q. Li and H.A. Zhang 70
Dynamic Mechanical Properties of CNTs/MoSi2 Composite Material
G. P. Zou, Z.L. Chang and Y.J. Qiao 75
Preparation and Properties of a New Ti3C2-Cu(Al) Cermet Series
Z.Y. Huang, H.X. Zhai, M.Q. Li and W.J. Wang 79
Preparation of Bulk Ti2AIC Using Ti3AIC2 Powders as a Starting Material
X.H. Chen, H.X. Zhai, S.B. Li, Y. Zhou and Z.Y. Huang 83
Densifying Ti3AIC2/Cu Composites Using a Cold-Extruding and Temper Means
H. B. Zhang, H.X. Zhai, Y. Zhou and Z.Y. Huang 87
Microstructure ofNanoceramic during Sintering and PreparationJ.P. Ren, K. Zhang and Y.L. Tang 90
Mechanical Properties of Aerogel-Ceramic Fiber Composites
Q.F. Gao, J. Feng, C.R. Zhang, J.Z. Feng, W. Wu and Y.G. Jiang 94
Apparent Activation Energy in Low Temperature Aging of Y-TZP Ceramics
Q.F. Xie, C. Wang, Q.F. Zan and L.M. Dong 100
Preparation and Mechanical Properties of HA/PHB CompositesZ.Q. Zhuo, L.M. Dong, C. Wang, Q.F. Zan and J.M. Tian 104
Application of ANN Back-Propagation for An Alloy Reinforced Ceramics/Metal Compositeunder Extra-Low Cycle Bending Fatigue Loading
Z.Y. Rui, H.Y. Duan, C.L. Lei and X.C. Wei 108
Surface Hardening of BN-A1 Ceramic CompositesY. Li, H.Y. Jin, X.D. Wang and G.J. Qiao 112
Effects ofDifferent Heat Treatment Temperatures on the Properties of Quartz Fibers
Q.H. Wei, C.H. Wang, Z.Q. Cheng, L. Li, H.S. Wang, Z.H. Wei and F. Gao 115
Fabrication and Properties of Si3N4-SiC-C Refractory CompositesY.G. Xu, B. Jiang, Z.H. Huang, M.H. Fang and Y.G. Liu 119
Effects of Heat-Treatment Temperature on the Properties of NegativeCTE Eucryptite Ceramics
Y. Li, Q.H. Wei, L. Li, C.H. Wang, X.L. Zhang and F. Gao 123
Preparation and Luminescent Properties of Green-Emitting La(B03,P04): Ce, TbL.M. Dong, Y.L. Zhuang, Z.D. Han, Z. Wu and X.Y. Zhang 359
Preparation and Optical Properties of Ti02 Nanotube Arrays by Anodic Oxidation Method
Z.M. Wang, Y.X. Chen, Y.M. Li and J.L. Zuo 363
Preparation and Electrical-Conductive Property of Sn02-Based Ceramics
G.Q. Luo, Q. Shen, Q.Z. Li, J. Li, D.M. Zhang and L.M. Zhang 367
NaAc Effect on the Anodization Formation of Ti02 Nanotube Arrays in GlycerolBased Electrolytes
Y.X. Yin, X. Tan and F. Hou 371
xii Chinese Ceramics Communications
Investigation of the Reaction Time and the Process of Synthesis of GaN Nanopowdersby Ammoniating Ga203
X.S. Xue, F. Wang, J.F. Zhu and H.B. Yang 376
Microwave Absorption of BaLao.5Fen.5O19/SiO2 Nano-PowdersZ.D. Han, Q.R. Zhao, L.M. Dong, Z. Wu and X.Y. Zhang 380
Forming Mechanism of Dy2Ce207 Ceramic for Thermal Barrier CoatingsH.S. Zhang, R.X. Hu and Q. Xu 383
Influence of Ca0.6MgMZr4(PO4)6 Coating on Alkali Corrosion Resistance of SiC Ceramic
J.N. Zhou, X.Z. Zhang and S.J. Peng 386
Finite Element Analysis on Cooling Process of SHS Reactive Flame Spray Surface CoatingW.B. Hu, L. Zhang, J.J. Wang and M.H. Ye 390
Structure and Dielectric Properties of (GdiuSmo.sYbo.iMZri.jCexihOT Ceramics
L. Liu, Q. Xu and F.C. Wang 394
Thermal Conductivity of Sm2Zr207-Carbon Nanotube CompositeX.X. Liu, Q. Xu and H.N. Cai 398
Preparation and Physical Properties of SrILai.xMgAlu019.o.5xH.D. Yao, Q. Xu, L. Liu and S.Z. Zhu 403
Fabrication of Multiple Oxidation-Resistant Coating on C/SiC Matrix
Y.L. Huo, Y.F. Chen, J. Tang, H.L. Liu and CP. Wang 406
Spraying Distance and Oxidation Resistance ofElectrothermal Explosion SprayedMoSi2-Based Coatings
S.X. Hou, Z.D. Liu, D.Y. Liu and L.P. Zhao 409
Structure and Properties of Ductile Iron Strengthened by Laser Surface AlloyingJ. Xu, W.Y. Wang, J.P. Xie, J.W. Li and A.Q. Wang 413
Microstructure and Wear Resistance of TiC/Ni3Al Composites Made by Pressureless Melt
Infiltration ProcessingB.L. He, Y.X. Yu and Y.P. Miao 417
Friction and Wear Characteristics of Laser-Clad Nano-Lubricating CoatingW.Y. Wang, J. Xu, J.P. Xie, H. Yan and A.H. Wang 421
Plasma Enhanced Microarc Oxidation on the Surface of Al-Cu-Mg AlloyS.H. Li, L. Zhang and C.W. Tan 425
Cr-Doped DLC Multilayered Thin Films Deposited Using Cathodic Vacuum Arc- and DC
Magnetron-Assisted Ion Beam SputteringX.C. Chen, Z.J. Peng, Z.Q. Fu and C.B. Wang 429
Preparation and Characterization ofAnti-Oxidation Coatings for Sliding Plates
L.N. Wang, B.B. Fan, R. Zhang, H.L. Wang and D.L. Chen 432
Wear-Resistant Properties of TiC/Fe Ceramic Composite Coating on Steel Plate
via Combustion SynthesisH. Zhao, S.W. Yang, Y.J. Qiao and X.H. Zhang 435
Tribological Behavior of Polyimide/Zinc Oxide Hybrid Films
B. Liu, Z.H. Yang and J.S. Zhou 438
Effects of Content ofAl203 Particles and Heat Treatment on Corrosion Resistance of
Ni-P-Al203 Composite CoatingsJ.H. Lu, W.C. Sun, M. Zhu, M.F. Tan and Q. Zhou 441
Effect of Pulsed Substrate Bias on Evolution ofSurface Morphology and sp3 HybridizationDegree ofAg-DLC Films in a Mid-Frequency Dual-Magnetron Sputtering
X. Yu, Y.Y. Yang and C.B. Wang 444
Advanced Materials Research Vols. 105-106 xiii
Preparation and Property of Ceramic Matrix Coating of Anti-Oxidation for Stainless Steel
at High Temperature by Slurry Method
P. Liu, L.Q. Wei, S.F. Ye, X. Zhou, Y.S. Xie and Y.F. Chen 448
Influence of Target Current on the Structure ofTi-Doped DLC Films
C.B. Wang, Z.Q. Fu, W. Yue, Z.J. Peng, X. Yu, S.S. Lin and M.J. Dai 451
Microstructure and Erosion Behavior at Elevated Temperature of Thermal SprayedFe-AIAVC Coating
B.H. Tian and Y. Liu 455
Preparation of Y203-AI203-Zr02 Nano-Ceramic Coatings on Metal Substrate
by Sol-Gel Method
X.F. Hou, P. Peng, Y.G. Liu, M.H. Fang and Z.H. Huang 459
Influence ofDeposition Voltage on Microstructures ofYttrium Silicates Coatings byHydrothermal Electrophoretic Deposition
Y.Q. Wang, J.F. Huang, L.Y. Cao and X.R. Zeng 463
Preparation ofMicrosized Monodisperse Silica Spheres by Hydrolysisof Tetraethoxy Silane
G.H. Wang, A. Li and Y. Zhang 466
Influence of Solution pH Value on the Preparation of SrTi03 Thin Films through Self-
Assembly ofLiquid Precursor Reaction
L. Cheng, G.Q. Tan, H.Y. Miao and Y. Wang 470
Effects of Preparing Conditions on the Performances of Nano La(S,C)-Ti02 FilmsK.J. Xuand J.T. Xi 474
Characteristics ofTiB2 Coating on the Surface of Copper Alloy Prepared by VibratingElectrospark Deposition
C. Luo, S.J. Dong and X. Xiong 477
Photocatalysis and Hydrophilicity of Y3+ Doped Ti02 Thin FilmsW.Y. Xu, M.B. Luo, L.B. Wei, Y.H. Liu and H.L. Lin 481
Zr02 Thin Films Prepared by Self-Assembled MethodA. Xia, G.Q. Tan, H.Y. Miao, Y.Y. Song and H.Y. Bo 485
Microstructure and Properties of Interface High-Speed Steel Reinforced byIn Situ VC /35CrMo Compound Roll
Y. Li, S.Z. Wei, L.J. Xu, C.W. Xu and R. Long 488
Optimization of the Preparation Process of Nano-Ti02/Micro-Cu Composite ParticlesB. Wang, H.P. Cui, J. Yan and S.G. Du 492
Fabrication of Fe-Based Al203-TiC Ceramic /Steel Composite by Self-PropagationHigh-Temperature Synthesis
C.X. Zhai, Y. Li, X.Y. Wang, L.J. Xu and S.Z. Wei 495
Ab Initio Study of Water Clusters Adsorption on Graphite Surface
B.B. Fan, H.L. Wang, L. Guan, D.L. Chen and R. Zhang 499
Characteristic of Microarc Oxidized Coatings on Titanium Alloy Formed in ElectrolytesContaining Aluminate and Zr02 Particles
Y.S. Zhong, X.D. He, J. Yu and L.P. Shi 502
Structure and Property of Micro Arc Oxidation Ceramic Coatings on Al Alloyin K2ZrF6 Solution
Z.D. Wu, Z.W. Yao, F.Z. Jia and Z.H. Jiang 505
Interface and Wear Resistance of High Frequency Induction RemeltedNi-Based WC Coating
H.X. Zhang, C. Luo, H.L. Zhao and S.B. Hu 509
Coating Evaluation Using Ultrasonic Wave TechnologyJ.J. Chang, X.G. Wang, Y.C. Shan and J.J. Xu 513
xiv Chinese Ceramics Communications
Enhancement in Bioactivity of Titanium Substrate with Composite Thin Films
F. Gao, F. Xiao and Z.X. Zhang 517
Effect of Pigmentation on Strength of Dental Y-TZP/Porcelain Bilayered Structure
Y.F. Yi, C. Wang, N. Wen, X.L. Wang, D.S. Yang and J.M. Tian 520
Effects of Veneering Porcelain Type on Bending Strength ofDental Y-TZP/
Porcelain Bilayered Structure
B. Deng, H.C. Liu, Y.F. Yi, C. Wang, N. Wen and J.M. Tian 524
Bonding Strength Between Zirconia Core and Different Veneering Ceramics
Y.W. Hu, X. Zhang, Y. Wu and W.J. Si 528
Synthesis of Calcium Metaphosphates Fine Powders by Chemical Precipitation Methods
Y. Zhang, D.S. Kong, Y.Q. Tao, J.P. Zhu and N.J. Yao 532
Influence ofDifferent Ceric Oxide and Ferric Oxide Content on the Color of Alumina-
Mineralization of Magnetite Induced by Chitosan HydrogelY.L. Wang, B.Q. Li, Y. Zhou and D.C. Jia 539
Behavior of hBMSC on Nano Hydroxyapatite Surface
G. Wu, Y.J. Wang and K. Wei 542
Influence of Background Color on the Chromatic Value of Four All-Ceramic
System Core Materials
L.Q. Shao, N. Wen, W.W. Zhang, Q. Liu and J.M. Tian 546
Effects of Presintering Temperature and Heating Rate on the Physical and Mechanical
Properties of Alumina-Glass-CompositesJ. Liu, L.Q. Shao, Y.F. Yi, B. Deng, W.W. Zhang, L.M. Dong, H.C. Liu, J.M. Tian
and N. Wen 549
Degradation Characteristic of Strontium-Containing Calcium Phosphate Cement In Vivo
X.Y. Zhao, F. Li and S.B. Li 553
Preparation and Properties on Silk Fibers Reinforced Hydroxyapatite/Chitosan CompositesJ. Wang, Q.Z. Sun, J. Gao, D.M. Liu, X.C. Meng and M.Q. Li 557
Effect ofDoped Traditional Chinese Medicine Drynariae Rhizoma on the Porcine Bone
Hydroxyapatite and Chitosan Porous Scaffold
M.Q. Li, J.Y. Wang and C. Ma 561
Calcium and Phosphate Biocoatings on Magnesium Alloy Fabricated byMicro-Arc Oxidation
C. Ma, X.Y. Zhang, L.J. Qu and M.Q. Li 565
Induction of Hydroxyapatite Particles Formation on PEGDA-Based Hydrogelsby Nanobacteria
G.X. Tan, C.Y. Ning and S.J. Zhang 569
Effect ofArtificial Saliva with Fluoride Ions on the Color of Ti-Porcelain
H.T. Wu, H.Y. Shang, L.T. Guo, J.F. Yang and T.W. Guo 572
Remineralized Evaluation of Nano- Hydroxyapatite to Artificial Caries
K.L. Lv, H.W. Yuan, X.C. Meng and X.Y. Li 576
Influence ofY2O3 Additive on Transparent of ALON Ceramics
H.W. Jiang, H.B. Du, T.Y. Tian and H. Wu 580
Preparation of Aluminum Oxynitride Spinel y-ALON Powders and Transparent Ceramics
C.G. Sun, J.Y. Niu, C.H. Wang, C.L. Zhou, B.L. Feng, J. Fan, Y.Y. Wang and J.S. Hao 582
Thermoluminescence and Optical Stimulated Luminescence Studies of SapphireH.L. Zhang, M.F. Zhang, J.C. Han, H. Yang, C.H. Xu and H.X. Guo 585
Advanced Materials Research Vols. 105-106 xv
Microwave Pyrolysis Chemical Vapor Infiltration of Carbon: Textural ChangesJ.Z. Zou, X.R. Zeng and B. Niu 589
Influence of Composition on the Characterization and Crystallization of Calcium-
Magnesium-Silicate Glass-Ceramics
H. Liu, X.T. Wang, B.G. Zhang and Z.F. Wang 592
Crystallization Behavior of a New Transparent Glass-CeramicsS.M. Wang, F.H. Kuang, Q.Z. Yan, Q.C. Zhang and C.C. Ge 597
Preparation of Foam Glass Ceramics from Phosphorus SlagB. Xu, K.M. Liang, J.W. Cao and Y.H. Li 600
A Technique for the Preparation of Porous Ceramic Materials by Gelcasting MethodH. Huang, D.M. Cheng, J.F. Tong, B.W. Li and L. Wang 604
Fabrication, Structure and Properties of Porous SiC Ceramics with High Porosityand High Strength
S.F. Wang, C.A. Wang, J.L. Sun, L.Z. Zhou and Y. Huang 608
Porous Silicon Nitride Microwave Transparent Material with CompoundedComponent Pore Former
F. Gao, C.H. Wang, L. Li, D.Q. Chen, P. Zhai, Q.H. Wei and H.S. Wang 612
Preparation of Porous Hydroxyapatite-Zirconia Composite Scaffolds by Combination of
Gel-Casting and Polymer Sponge Methods
L.L. Wang, X.F. Wang, H.T. Jiang and C.L. Yu 616
Effect of SiC on Microstructures and Properties of Clay Foam Ceramics
J.G. Bai, G.L. Liu and J.F. Yang 620
Effect of Pore-Forming Processing on the Gas Permeability and Flexural Strength of
Porous SiC Ceramics
L. Fan, H.J. Wang and Z.H. Jin 623
Adsorption of Ammonia from Aqueous Solution Using Zeolite-Attapulgite Nano-PoreStructure Ceramisite
Z. Wang, L.S. Zhang and Z.Q. Jing 627
Properties of Ceramic Filter Material Made of Coal Fly Ash and its Application in
Chromium(VI) Removal
Z.Q. Jing, H.Q. Xue, S.H. Lin and Z. Wang 631
Effect ofTetraethoxysilane Infiltration on Properties of 2.5D Quartz Fibers
Reinforced Silica
H.S. Wang, L. Li, C.H. Wang, Y. Li and Q.H. Wei 635
Electrodeposition ofPorous ZnO Electrodes in the Presence of
Cctyltrimethylammonium Bromide
L.R. Yang, W.L. Zhang, M.Z. Duan and Z.G. Jin 639
Effect of Sintering Temperature on the Behavior of Oxygen Permeation for
La0.6Sro.4Coo.iFeo.803.8 Tubular Membranes
C.G. Fan, R.M. Wu, L.Z. Pei and Q.F. Zhang 643
Proton Transport in Nafionll7 Membranes by Molecular DynamicsT.J, Wu, Y.H. Wu, H. Sun and Y.L. Tang 647
Preparation of Ni/YSZ Anode Material Using Gel-Tape Casting and Performance AnalysisZ.Z. Yi, F.R. Zhai, Y. Li, W. Liu and Z.P. Xie 650
Synthesis and Characterization of the Cathode Materials
Lao.7Sro.,5Cao.15Cot.yFey03-8 for ITSOFC
W.Y. Gao, Z.Q. Hu, X.G. Sui, CM. Li, N.L. Tang and H.L. Cao 653
Preparation of Double-Perovskites Sr2Fe1.,ScxMo06.6 Powders for the Cathode of SOEC bySol-Gel Citrate Method
B. Ge, J.T. Ma, D.S. Ai, X.P. Lin and C.S. Deng 657
xvi Chinese Ceramics Communications
Preparation and Characterization of Zr02 Nanopowders for Solid Oxide Fuel Cells
Y.X. Chen, X.Y. Gu, C. Cao and Y. Huang 660
Synthesis and Electrochemical Properties of 0.5Li2Mn03«0.5LiMn0.5Nio.502S.W. Zhong, W. Hu and Q. Zhang 664
Synthesis ofthe Layered-Spinel Intergrowth Structure Cathode Materials by
Co-Precipitation MethodY.C. Feng, S.X. Zhao, C.W. Nan and Y.H. Lin 668
Fabrication of Graded WC-Co Cemented Carbides by a Lamination Method
J.G. Cheng, J.C. Zhu, L. Wan and H.G. He 673
Effects of Sol Viscosity on Properties of BST Thin Films Prepared by Sol-Gel Method
Z.H.Zhou and J. Liu 676
Orthogonal Experiment of Glass-Alumina Functionally Gradient Materials Produced
with Rapid PrototypingH.T. Jiang, X.F. Wang, B.C. He and C.L. Yu 679
Fracture Dynamics of a Mode III Moving Crack Impacted by Elastic Wave in
Functionally Graded Materials
X.G. Li, Z.Q. Wang and N.C. Lu 683
Low Temperature Solid Oxide Fuel Cells with SDC-Carbonate ElectrolytesJ. Di, M.M. Chen, C.Y. Wang, J.M. Zheng and B. Zhu 687
An Improved Two-Phase Flow and Transport Model for the PEM Fuel Cell
S.Z. Chen, Y.H. Wu, H. Sun and H.T. Liu 691
Fabrication and Characterization of Large Size Anode Substrate of Solid Oxide Full Cell
N. Zuo, ML. Zhang, J.B. Huang, L. Zhang and Z.Q. Mao 695
Oxygen Reduction Reaction of PEMFC Cathode by Molecular Simulations
C. Liu, Y.H. Wu, H. Sun and Y.L. Tang 698
Conversion ofNatural Gas to Hydrogen under Super Adiabatic Rich Combustion
P.Y. Ma, Z.G. Tang, Y.L. Li, C.H. Nie, X.Z. He and Q.Z. Lin 701
Structure, Magnetic Properties and Defects Distribution of
Mno.5Zno.5LaxFe2.xO4 Nanocrystals
L.Q. Wang 706
A Novel Biomass Gasifier for Producing Tar-Free and Hydrogen-Rich SyngasZ.G. Tang, P.Y. Ma, J.P. Cheng, Y.L. Li and Q.Z. Lin 709
Optimal Selection of Several Substrates in Fermentative BiohydrogenProduction Technology
M.Q. Chen, T. Ma and N.Q. Ren 713
Hot Press Sintering Behavior of Nano-Sized A1N Powders
H.B. Li, J.T. Luo, Y.F. Gu and Y.X. Xu 720
Influence of the Reinforcement's Number on the Mechanical Properties of the
Reinforced Concrete Beam
W.H. Li and X. Yang 723
Grain-Size Characteristics of Mullitc Nanocomposites Prepared by Open-SystemHydrothermal Crystallization Method
N.C. Chen, H.M. Ao, Q.H. Li and Q. Tang 729
Synthesis of Ti3SiC2 Machinable Ceramics by High-Energy Milling and Hot-PressingB.B. Liu, F. Wang, J.F. Zhu and Y.L. Li 733
A New Method ofProducing High Purity 4A-Molecular Sieve from High Modulus Sodium
Silicate Liquor Purified by Carbonization
G.H. Bai, P. Xu, W. Teng and X.G. Wang 736
Advanced Materials Research Vols. 105-106 xvii
Changes of Two Phase Composition in Phase Separation Process of
Na20-CaO-Al203-B203-Si02-Ti02 SystemW.L. Zhang, S.J. Gao, J.F. Wang and J.G. Jin 739
Application ofDSC Technique in Study of Glass Ceramic
L.J. Qu, B. Li, J. Wang and Y.M. Gu 743
Nitrogen-Doped Nano-Ti02 Ceramic Film: Fabrication and Application to PhotocatalysisY.L. Jiang, Z.P. Yao, L.J. Yang, Y. Liu, Z.H. Jiang and H.L. Liu 746
Crystallization Kinetics of Li+-Doped Ti02 Films Prepared by Sol-Gel Dip CoatingF. Zhou, Y.Q. Fu and K.M. Liang 750
Effects of Starting Carbon Sources on the Carbothermal Synthesis of SiC PowdersJ.H. Cheng and D.J. Wen 754
Experimental Study on Stainless Steel Slag Used in Ceramic MakingY.B. Zong, Y. Li and D.Q. Cang 758
Preparation of Nanometer Mullite via Supercritical C02J.H. Li, H.W. Ma and Y. Cao 761
Effect of Carbon as Foaming Agent on Pore Structure ofFoam Glass
D.S. Lv, X.H. Li, L. Wang, J.J. Du and J. Zhang 765
Synthesis of MgAlON-Bonded MgO RefractoryZ. Cheng, J.L. Sun, F.S. Li, Z.Y. Chen and L.G. Wan 769
Effect of Nucleating Agents on Crystallization Glass Ceramics Produced from Nickel SlagY. Wang, L.J. Wang, M.S. Ma, W. Ni and Y.S. Feng 773
Preparation of Rutile Crystalline Glaze
Y.F. Xia, Z.H. Huang, J.Z. Yuan, L.J. Wang and J.H. Xie 778
Preparation of Integrated Ceramic Armor for Body Bulletproof bySemi-Aqueous Gel-Casting
Y.Y. Liang, D.M. Chen, J.F. Tong and X.C. Huang 782
Effect of Phase Separation Structure on the Crystallization Property of Blast Furnace SlagY. Li, Y.B. Zong and D.Q. Cang 787
Synthesis ofAluminum Oxynitride Powder by Carbothermal Reduction Method
T.Y. Tian, H.B. Du, F. Sun and H.W. Jiang 79 L
Preparation of the Barium Strontium Titanate/Magnesium Oxide Plates byNon-Aqueous Gel-Casting
C.R. Jiao, D.M. Chen and J.F. Tong 794
Using Monte Carlo Simulation to Improve Ceramic R&D Investment Decisions
B.C. He, H.T. Jiang, S.Z. Yao and B.Y. He 798
Synthesis of Cordierite with Low Thermal Expansion Coefficient
K. Zhu, D.Y. Yang, J. Wu and R. Zhang 802
Preparation of High-Purity Alumina by Hydrolyzing High-Purity Metal Aluminum
L.J. Liang, H. Jin, W.K. Jun and Z.X. Qin 805
Effect of Sodium Dodecylbenzenesulfonate on Dispersion of Si02 Nano-Powder
in Aqueous SystemJ.Y. Liu, S.N. Ma, J. Qiu and X.B. Suo 808