Chief Catalog

Mounting SolutionS Product guide

Projector Mounts

Flat Panel Mounts

Swing Arm Wall Mounts

In-Wall Mounts

Fixed Wall Mounts

Tilt Mounts

Ceiling Mounts

Carts/Stands

Truss/Pole

autoMated Mounts

Monitor Mounts

FULL LINE CATALOG2008-2009

www.chiefmfg.com

cHieF ManuFacturinG n a division oF Milestone av tecHnoloGies n www.chiefmfg.com

usa/international n P 800.582.6480/952.894.6280 n F 877.894.6918/952.894.6918 n [email protected] cHieF Mounts canada n P 877.345.4329 n F 888.377.5314 n [email protected] Milestone euroPe b.v. n P 31 (0)40 266862 0 n F 31 (0)40 2668615 n [email protected] Milestone asia PaciFic ltd n P 86 755 8996 9226 n F 86 755 8996 9217 n [email protected] ©2008 Milestone av technologies, a duchossois Group company. 800107b 8/08. chief is a registered trademark of Milestone. all other brand names or marks are used for identification purposes and are trademarks of their respective owners. all patents are protected under existing designations. other patents pending.

e n d - u s e r f o c u s e d f a s t e r i n s t a l l a t i o n s u p e r i o r s e r v i c e p r o v e n q u a l i t y


FU

LL LINE

CA

TALO

G 2

00

8-2

00

910%

SW-COC-001865

terMS & conditionS

clickwww.chiefmfg.com

call800.582.6480

FaX877.894.6918

PRICES: Prices are subject to change without notice. Orders are priced at the pricing in effect on the date your purchase order was received. To guarantee pricing for a specific period, customer must obtain a written quotation from Chief Manufacturing. Chief Manufacturing only sells directly to authorized Chief dealers and distributors. Possession of said price book does not constitute an offer to sell.

QUANTITY DISCOUNTS: With the exception of CMA accessories, products with the same 3-letter prefix may be combined to receive quantity-based discounts. For example: three RPA1200 can be mixed with three RPA800 for the 6-11 piece quantity price break. However, three RPA1200 cannot be mixed with three PSM2042. Contact Chief if you have any questions regarding price structure.

TERMS AND CONDITIONS: All accounts are due and payable in U.S. funds according to the terms of the invoice. Payments by credit card (Visa, MasterCard, American Express and Discover) are accepted without an additional processing charge. All credit card orders are pre-authorized at the date of the purchase order; however, except in the case of custom orders, payment is not charged until the order ships. Wire transfer information is also available upon request. Contact Chief for details on your account, including terms of sale and price structure.

ORDERING: Because of the specific nature of our products and our commitment to entering and shipping orders accurately, we prefer that orders be placed in writing via a purchase order and sent to us via fax (877-894-6918) or via e-mail ([email protected]). In urgent situations, we will make every effort to take accurate orders verbally when requested by the customer. Chief cannot guarantee that verbal miscommunication errors will result in the purchaser’s favor.

ORDER CONFIRMATION: Customers will receive an E-mail confirmation of their order within 1-3 hours of receipt of purchase order. If you do not receive a confirmation of your order, please contact us as it is possible we did not receive your original order. Please review the confirmation to ensure Chief has recorded the details of the transaction as you expected and notify Chief of any discrepancies immediately.

CHANGES TO ORDERS: Because expedited orders begin the production and shipping fulfillment process immediately upon receipt and entry of purchase order, it is frequently not possible to change these orders. Other orders will be changed as possible. Contact Customer Service at 800.582.6480 (domestic) / 952.894.6280 (international) and they will work through an alternative solution with you. In all cases, the customer is responsible for incremental charges incurred because of the change.

SPECIAL ORDERS: Some of Chief’s products can be customized to fit your specific applications. Contact Inside Sales for additional information and pricing. Orders for large quantities of products may also be considered a special order. Any special order or custom product not normally carried in inventory cannot be returned. All electrical products and products with quote pricing are treated as special order items.

PRODUCT CHANGES/DISCONTINUED PRODUCTS: Chief is constantly developing new products and making improvements to existing ones; therefore, we reserve the right to revise or change specifications, designs and model numbers and to discontinue models without notice.

PACKAGING: Where possible and practical, Chief will bulk-pack the items on your order. Please keep in mind that the dimensions and weight of some of our products may preclude bulk-packing. We are not responsible for air-freight or other charges due to multiple single package shipments.

DELIVERY: All promises of delivery are made in good faith and every reasonable effort is made to see that delivery schedules are met. However, if Chief is unable to meet a schedule due to factors beyond our control such as, but not limited to, failure of our suppliers to meet their promised dates or weather-related delivery delays, Chief will not be responsible for significant or specific damage. Significant or specific damages may be, but are not limited to, express shipping method charges or installation delay charges. Contact the Chief Inside Sales team for assistance with freight estimates specific to your needs. Delivered prices do not include any type of extraordinary charges such as lift gate requirements, inside delivery charges, residential charges or other non-standard charges.

FREIGHT AND FREIGHT DAMAGE: Because all Chief product ships FOB Savage, MN or point of shipment, all shipping costs and risks of freight damage are the responsibility of the purchaser. It is the customer’s responsibility to immediately open and inspect all packages and, in the event there is any damage or shortages, file a claim with the freight company. Please contact Chief Customer Service at 800.582.6480 (domestic) / 952.894.6280 (international) to get contact information about the specific freight company used and to discuss receiving a replacement product. Keep the damaged product in its original packaging and carton. Unless concealed damage is reported to the Carrier and Chief immediately, there is no recourse. The customer will be charged for any replacement product as the eventual credit will come directly from the carrier via the claim filed.

RETURNS AUTHORIZATION: All merchandise returned to Chief must be returned with prior authorization and a Return Authorization number provided by Customer Service. Chief will provide Return Authorization only for those products purchased directly from Chief. Consumers or dealers purchasing through a third party must request returns through that third party and are subject to that entity’s return policies and charges. Defective or product received incorrectly due to an error on Chief’s part will be credited to your account in full. In situations where the dealer needs to return merchandise due to a change in its project/equipment or due to ordering incorrectly, a restock charge will apply as follows. Merchandise invoiced in the past 0-30 days - 10%; 31-60 days - 15%; 61-90 days - 25%. Reduced fees may be given for an accompanying reorder of equal or greater value. Returns are not allowed for merchandise over 90 days old; electrical lift products; special order products, or discontinued merchandise. Products returned that are damaged or missing parts will not be eligible for credit unless they can easily be made saleable. Additional charges for parts and labor may apply.

LIMITED WARRANTY: With the exception of electric, gas cylinder and one-way bearing mechanisms, Chief warrants its products to be free of defects in material and workmanship for 10 years. All warranties are in effect beginning the date the product was invoiced by Chief. Electrical mechanisms (such as lift products) have a 1-year limited warranty. Gas cylinder and one-way bearing mechanisms have a 5-year limited warranty. All warranties are in effect for the original purchaser only. Chief disclaims liability for any modifications, improper installation and/or installations over the specified weight capacity. Chief also disclaims liability for any modifications made to electrical mechanisms, improper installation, incorrect voltage connection and/or installations over the stated weight capacity. All Electrical Mechanisms are intended for indoor use only and failure to comply will void warranty. Chief’s sole warranty obligation to the owner of its products is to repair or replace (at Chief’s discretion) defective products at no charge to the original purchaser within the warranty period. The purchaser is responsible for returning the product to Chief Manufacturing via prepaid shipping. To the maximum extent permitted by applicable law, Chief disclaims any other warranties, express or implied, including warranties of fitness for a particular purpose and warranties of merchantability. Chief will not be liable for any damages whatsoever arising out of the use or inability to use Chief products, even if Chief has been advised of the possibility of such damages. Chief bears no responsibility for incidental or consequential damages. This includes, but is not limited to, any labor charges for the repair of Chief products performed by someone other than a Chief employee. Because some states and jurisdictions do not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply. Chief will not be responsible for damage to Chief products caused by misuse, abuse, failure to properly package the product for return to Chief or for damage caused by carriers during shipment to or from Chief. Any repairs to Chief products required due to misuse, abuse or shipping damage or repairs of defective Chief product outside the warranty period will be performed at the current rates established by Chief for factory service.


call800.582.6480

FaX877.894.6918

introductionFull line catalog 2008-2009

For 30 years now Chief has been committed to providing industry first products and dedicated customer service. We remain committed to these core values today and as we look to the future. They are the driving force behind this year’s class of new products and service tools. We believe these new offerings will reduce project design and installation time and provide a new range of functionality to end-users. If you need further information you can always check out www.chiefmfg.com or call our Customer Service Team. We sincerely thank you for your business and we look forward to serving your needs for another 30 years.

MESSAGE FROM CHIEF

Scott GillPresident & CEO, Milestone AV Technologies

Chief is a Division of Milestone

Steve DurkeeVP & General Manager, Chief Products

AWARDS

Chief’s CM2C40 Automated Flat Panel Ceiling Lift, and PIWRF/MIWRF In-Wall Swing Arm Mounts were both awarded the 2008 HDI Product of the Year.

Custom Retailer named Chief’s PIWRF and MIWRF In-Wall Swing Arm Mounts as 2007 EXCITE! Award winners.

Chief’s CM4S57 Automated Speaker Accessory was named Electronic House Product of the Year for 2007.

Chief is a Certified Audio Visual Solutions Provider (CAVSP) and our staff has achieved a published level of certification to maintain a standard of excellence in the AV industry.

Installer’s Forum – Certified through CEDIA, NSCA and InfoCommRPA Mini Installer’s Forum – Certified through CEDIASafeguarding Your AV Investment – Certified through CEDIA

CONTINUING EDUCATIONAVIU, Ensuring a Secure Installation – Accredited by CEDIAOnline Learning, Building Innovative AV Ceiling Installations – Accredited by NSCA

CERTIFICATIONS & TRAINING

HDI SHOW 2008

FULL Line cataLog 2008-2009

CliCkwww.chiefmfg.com

CAll800.582.6480

FAX877.894.6918

introdUction

TABLE OF CONTENTS

InvertedSecurityNon-InvertedHeavy DutyAccessories

Swing ArmIn-WallFixedTiltCeilingCarts & StandsTruss & PoleDecorative FrameAccessories

PROJECTOR MOUNTS FLAT PANEL MOUNTS

Projector LiftsFlat Panel Mounts & LiftsAutomated CabinetsAccessories

Wall & Slat WallDeskTable StandGrommetAll-in-One WorkstationLaptop & KeyboardCPUPoleAccessories

AUTOMATED MOUNTS MONITOR MOUNTS

MOUNTBUILDER™ WHAT’S NEW

a tooL that wiLL revoLUtionize the av indUstry Chief’s MountBuilder™ is the industry’s first online product configurator for building and specifying mounts. Users are guided through a logical sequence of steps for building a mount configuration while taking advantage of MountBuilder’s many innovative features:

• Visually builds an installation

• Builds a parts list

• Auto-calculates weight capacity and drop distance

• Saves configurations for future use

• Creates a PDF with image for proposals

• Includes Chief’s Easy Bid Spec Form

www.mountbuilder.com

sLBU™ UniversaL Projector interFace Page 4

FUsion™ series Fixed & tiLt waLL MoUnts Page 44-56

sL151™ aUtoMated Projector LiFt Page 80

Kwt110™ aLL-in-one worKstation Page 107


CAll800.582.6480

FAX877.894.6918

2

notes


cAll800.582.6480

FAX877.894.6918

PR

OJE

CT

OR

MO

UN

TS

Projector MoUnts

3


CAll800.582.6480

FAX877.894.6918

Projector MoUnts

4

taBLe oF contents

rPM™ RPA ElitE™ PRojEctoR Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

rPMa™ RPA ElitE™ locKinG PRojEctoR Mount . . . . . . . . . . . . . . . . . . . . .7

rPMa1™ RPA ElitE™ SEcuRitY Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

rPa™ PRojEctoR Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

rPaa1™ SEcuRitY Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Lcda™ non-invERtEd univERSAl Mount . . . . . . . . . . . . . . . . . . . . . . . . .11

vcM™ HEAvY dutY Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Projector MoUnt accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 21

technology showcase

Step 1 attach height-adjustable standoffs to projector

Step 3 attach interface to legs

lamp & filter access unlatch legs to disconnect interface from projector

Step 2 latch legs onto standoffs

seaMLess UPgrade Replaces previous SLBU included with all RPA and RPA Elite series projector mounts

sPeciFicationsHeight 1.45 - 1.9”

Color, Universal Black, Silver, White

Weight Capacity 50 lbs (22.7 kg)

Faster instaLLation new 3-step assembly method saves time on every projector installation

Faster service Quick-disconnect at projector allows unlimited lamp and filter access

on-site tooL storage Includes secure storage tray for hex keys

siMPLiFied aLL-Points secUrity Secure projector with just one tamper-resistant screw size (qty. 4)

sLBU™ nEw univERSAl PRojEctoR intERfAcE Shipping January 2009!


CAll800.582.6480

FAX877.894.6918

Projector MoUnts

5

HOW TO ORDER

ORDERING TIPS

FAX 877 .894 .6918 (domestic)952 .894 .6918 (international)

e-mAil orders@chiefmfg .com

oPtionS StEPS

oRdERinG oPtionS tiPS

tiPs & tooLs

chief’s projector mounts involve a varied set of ordering options .

for ordering details specific to an individual solution, visit the product page at www .chiefmfg .com and click on the ordering info tab .

1. select Mount i .e . RPA Elite – RPM RPA – RPA

2. choose interfaceSee MountFinder™ Pro to determine compatibility for your projector

custom – RPMXXXX universal – RPMu

3. add Keyed Locking if security is needed, include integrated mount security featuring a keyed lock . Reference A, B or c within your model number (i .e . RPMuA, RPMuB or RPMuc – A, B, c signify varying keyed locks) .

4. indicate color Black – RPMAuB, white – RPMAuw, Silver – RPMAuS

UPgrade to rPa eLite™ Choose from universal or custom models of Chief’s industry leading projector mounts, including the RPA and RPA Elite. Upgrading to the RPA Elite minimizes installation time, simplifies maintenance and offers keyed lock security. For a complete list of RPA Elite features, see pages 6-7.

Projector PLaceMent caLcULator Conveniently calculate your projector placement, needed screen size and throw distance by visiting www.projectorcentral.com (select Calculator Pro from left navigation).

sPeciFy coMPLete ModeL nUMBer Reference the Ordering Options section (at left) for a step-by-step overview of how to arrive at the correct projector model number for your installation needs.

seLect accessories with MoUntBUiLder™ Log onto www.mountbuilder.com to visually configure a projector mounting solution for your application, complete with all needed accessories. MountBuilder works to simplify the mount selection process by walking you through a series of steps to configure a complete mounting solution. When finished, conveniently save, print and email the configuration with a few simple clicks!

Patented technoLogy Look for Chief’s exclusive patented features, including MicroZone™ Adjustments, Centris™ Technology and Q-Lock™ Integrated Security. These revolutionary designs minimize projector installation time and provide hassle-free maintenance.

steP 1 To determine a mounting solution for your application, visit www.chiefmfg.com to access Chief’s MountBuilder™ and MountFinder Pro™. Or contact our experienced Customer Service team for in-depth, personalized service.

steP 2 Choose from custom or universal mount options, along with the appropriate accessories needed for your installation.

steP 3 Fax or e-mail in your order.

call customer service 1 .800 .582 .6480 (domestic) 952 .894 .6280 (international)

visit our website www .chiefmfg .com


CAll800.582.6480

FAX877.894.6918

SPECIFICATIONS

FEATURES

TECHNICAL DRAWINGS

WHAT YOU NEED TO KNOW

RECOMMENDED ACCESSORIES

6

Projector MoUntsrPM™ RPA ElitE™ PRojEctoR Mount

microZone™ AdjuStmentS PAtEnt-PEndinG this feature makes projector registration fast and precise (including flush-mount installations) .

centriS™ technology PAtEnt-PEndinG Enables effortless fingertip positioning . Self-adjusts to support different projector weights .

Quick connect/diSconnect convenient lamp and filter access on most projectors . disconnecting maintains registration and doesn’t affect pre-set adjustments .

cAble mAnAgement Route cables through top of mount without additional accessories .

All-PointS™ Security Exclusive steel-into-steel locking hardware at all connection points to protect against theft .

1

2

3

4

5

aBoUt rPa eLite™

• Industry-first microadjustable projector mount

• Compatible with a wide array of accessories

• Ships fully-assembled with everything you need for installation in one box

• Available in Custom (black) or Universal (black, silver, white)

Roll +/-3˚

Pitch +/-20˚

Yaw 360˚

Dimensions 6.5” x 2.75” x 5.5” (HxWxD) (165 x 69 x 140 mm)

Color, Custom Black Color, Universal Black, Silver, White


For a complete list of projector mount accessories see page 13.

cMs sUsPended ceiLing Kits

cMs extension coLUMns

LsB100 n Lateral Shift Accessory

Pitch AdjustmentPoint +/-20˚

Roll Adjustment Point +/-3˚

1 .0” (25 mm)

1 .5” diA nPt

2 .72”(69 mm)

5 .24”(133 mm)

6 .5”(165 mm)

4 .5”(114 mm)

5 .5”(140 mm)

5 .5”(140 mm)

5

43

1 2

Yaw AdjustmentPoint +/-20˚


CAll800.582.6480

FAX877.894.6918

SPECIFICATIONS

TECHNICAL DRAWINGS



FEATURES

7

Projector MoUntsrPMa™ RPA ElitE™ locKinG PRojEctoR Mount




Q-lock™ Quick releASe lever Provides quick connect/disconnect of the projector for service and enhanced security with an integrated key and lock system .

1

2

3

4

* Dimensions don’t include interface bracket

Roll +/-3˚

Pitch +/-20˚

Yaw 360˚

Dimensions* 6.5” x 2.75” x 5.5” (HxWxD) (165 x 69 x 140 mm)



aBoUt rPa eLite™

• Industry-first microadjustable projector mount

• Keyed locking options (A/B/C)







LsB100 n Lateral Shift Accessory

Yaw AdjustmentPoint +/-20˚

4

3

1 2

Roll Adjustment Point +/-3˚

1 .0” (25 mm)

1 .5” diA nPt

2 .72”(69 mm)

5 .24”(133 mm)

6 .5”(165 mm)

4 .5”(114 mm)

5 .5”(140 mm)

5 .5”(140 mm)

Pitch AdjustmentPoint +/-20˚


CAll800.582.6480

FAX877.894.6918

SPECIFICATIONS

FEATURES

TECHNICAL DRAWINGS



8

Projector MoUntsrPMa1™ RPA ElitE™ SEcuRitY Mount





comPlete Security universal mounting interface with secured mounting points for high-risk environments .

1

2

3

4

5

aBoUt rPMa1™

• Industry-first micro-adjustable projector mount

• Keyed locking options (A/B/C)

• No tamper resistant hardware required

• Universal interface and also supports optional custom SLBs


Roll +/-3˚

Pitch +/-20˚

Yaw 360˚


Color Black, White





PMsc n Security Cables

41

3

2

5

3 .89”(99 mm)

6 .1”(155 mm)

1 .1”(28 mm)

14 .71”(374 mm)

7 .36”(186 mm)

1 .5” nPt threads

12 .21”(310 mm)


CAll800.582.6480

FAX877.894.6918

SPECIFICATIONS

TECHNICAL DRAWINGS



FEATURES

9

Projector MoUntsrPa™ PRojEctoR Mount

indePendent roll, Pitch And yAw for quick and precise projector registration .


All-PointS™ Security Exclusive steel-into-steel locking hardware at all connection points to protect against theft .

multiPle inStAllAtion oPtionS Mounting options include: flush mount to ceiling, use ¼” (6 .35 mm) threaded rods or use a 1-1/2” nPt threaded extension column .


1

2

3

4

5


Roll +/-4˚

Pitch +/-25˚

Yaw 360˚




aBoUt rPa™

• Industry-leading RPA Series with independent roll, pitch and yaw







Pg2a n Security Cage

5

31 2

3 .25”(83 mm)

1 .75”(44 mm)

5 .5”(140 mm)4 .5”

(114 mm)

5 .5”(140 mm)

5 .02”(128 mm)

2 .77”(70 mm)

3 .1”(79 mm)

1 ½” nPt

Ø3 .75 Bolt circle

4


CAll800.582.6480

FAX877.894.6918

SPECIFICATIONS

FEATURES

TECHNICAL DRAWINGS



10

Projector MoUntsrPaa1™ SEcuRitY Mount





comPlete Security universal mounting interface with secured mounting points for high-risk environments .

1

2

3

4

aBoUt rPaa1™

• Industry-leading RPA Series with independent roll, pitch and yaw

• No tamper resistant hardware required

• Universal interface and also supports optional custom SLBs


• Ships fully assembled with everything you need for installation in one box


Roll +/-4˚

Pitch +/-25˚

Yaw 360˚


Color Black, White





PMsc n Security Cables

4

3 2

1

5

12 .11”(308 mm)

24 .08”(612 mm)

3 .35”(85 mm)

16 .19”(411 mm)

1 .5” nPt threads

5


CAll800.582.6480

FAX877.894.6918

SPECIFICATIONS

TECHNICAL DRAWINGS



FEATURES

11

Projector MoUntsLcda™ non-invERtEd univERSAl Mount


AdjuStAble trAy Accommodates a wide variety of projectors . no interface bracket required .



1

2

3

4

* Tray width of LCDA240C is not adjustable. Adjustments are for the side panels only. Tray is a fixed 12.5” (317 mm) wide

Roll +/-5˚

Pitch +/-90˚

Yaw 360˚

Dimensions* Varies per model (HxWxD)

Color Black


Lcda Model a - Max height B - Max width c - tray depth

LCDA215C 3.33” - 4.25” 7.63” - 12.6” 8” (84 - 112 mm) (194 - 320 mm) (203 mm)

LCDA220C 7.69” - 13.4” 8.63” - 11.5” 17.75” (196 - 340 mm) (219 - 292 mm) (450 mm)

LCDA225C 10.8” - 16” 8.63” - 11.5” 17.75” (196 - 340 mm) (219 - 292 mm) (450 mm)

LCDA230C 7.69” - 13.4” 12.69” - 23.25” 17.75” (196 - 340 mm) (324 - 591 mm) (450 mm)

LCDA240C 10.8” - 16” 14.13” - 19.6” 22.25” (274 - 419 mm) (358 - 498 mm) (565 mm)

choose FroM 5 Lcda™ ModeLs




cMa250 n Flush Mount Kit

2

4

1

3

3 .25”(83 mm)

2 .03”(52 mm)1 .25”

(32 mm) 4 .4” Min(112 mm)

* LCDA225C shown

18 .2”(462 mm)

7 .45” - 12 .66”(189 - 322 mm)

Pitch ±90˚ 10 .27” - 18 .12”(261 - 460 mm)

Photo not

AvAilAble

1 .5” nPt threads


CAll800.582.6480

FAX877.894.6918

SPECIFICATIONS

FEATURES

TECHNICAL DRAWINGS



12

Projector MoUntsvcM™ HEAvY dutY Mount


multiPle inStAllAtion oPtionS Mounting options include: flush mount to ceiling, use ½” (12 .7 mm) threaded rods or use a 1-1/2” nPt threaded extension column .

Quick connect/diSconnect convenient lamp and filter access on most pro-jectors . disconnecting maintains registration and doesn’t affect pre-set adjustments .


1

2

3

4

aBoUt vcM™

• Industry-first microadjustable independent roll, pitch and yaw

• Three mounting methods

• Custom option only

• Ships fully assembled with everything you need for installation in one box



Roll +/-5˚

Pitch +/-20˚

Yaw 360˚


Color Black



cMa strUctUraL adaPters


LPK1 n Flush Mount Kit

4

3

2

1

17 .36”(441 mm)

8 .13”(206 mm)

9 .86”(250 mm)

6 .04”(153 mm)

4 .5”(114 mm)

3 .97”(101 mm)

9”(229 mm)

16 .25”(413 mm)

Photo not

AvAilAble

1 .5” nPt threads


CAll800.582.6480

FAX877.894.6918

Projector MoUnts

13

cmA105™ 4” (102 mm) Flat Ceiling Plate

General purpose ceiling plate with n

small mounting footprint

Use with short columns or when n

mounting space is limited

Weight Capacity: 500 lbs (227 kg) n



large mounting footprint

Use with long columns to distribute n

load




medium mounting footprint


Available in black, silver and white n

cmA330™ 8” (203 mm) Offset Ceiling Plate

Offset provides cable exit when n

mounting to flat ceiling surfaces

Offset Height: 1.75” (45 mm) n


cmA345™ Structured Ceiling Plate Flexible joint to minimize shock and n

vibration

Offest provides cable exit when n

mounting to flat ceiling surfaces


CEILING PLATES

Common Installations

concrete cMA330 & cMA345

vaulted cMA395

accessories

cmA100™ 8” (203 mm) Ceiling Plate with Adjustable Column

All-in-one solution for many n

common ceiling structures

Extension: 24.25-46” (61.6-116.8 n

cm) in .75” (19 mm) increments



cmA700™ 6” (152 mm) Ceiling Plate with Adjustable Column

All-in-one solution for many n

common ceiling structures

Extension: 12-18” (305-457 n

mm) in 1” (25 mm) increments



cmS115™ SpeedConnect Ceiling Plate with 1-1/2” NPT opening

Low-profile, aesthetic design n

Integrated cable port n

for a clean installation



cmA101™ Designer Ceiling Plate Attractive solution for basic n

installations

Two or four bolt installation n




CAll800.582.6480

FAX877.894.6918

Projector MoUnts

14

cmS390™ Dual Joist Ceiling Plate Attaches to finished ceilings and n

provides lateral shift between joists

Joist Width: 16” (406 mm) n


cmS391™ Dual Joist Ceiling Plate Attaches to finished ceilings and n

provides lateral shift between joists

Joist Width: 24” (610 mm) n


cmA395™ Angled Ceiling Plate Adjustable for installation n

on angled ceilings


Available in black and white n

cmA440™ Above-Tile Suspended Ceiling kit

Flexible solution supports column n

placement within 2 x 2’ (600 x 600 mm) or 2 x 4’ (600 x 1200 mm) ceiling tile

Includes 10’ (3 m) safety cable, 20’ n

(6.1 m) strand wire, four turnbuckles, wood eye bolts, concrete anchors and a chrome finishing ring

Weight Capacity: 50 lbs (22.7 kg) n

cmS440™ Above-Tile Suspended Ceiling kit

Flexible solution provides infinite n

column placement within 2 x 2’ (600 x 600 mm) or 2 x 4’ (600 x 1200 mm) ceiling tile

WireVice n ™ cable suspension system for quick and easy tie-off

TwisTile n ™ ceiling tile cutter easily pierces circular hole for extension column


cmS440P™ Suspended Ceiling kit with Power Conditioner

Combines CMS440 with PX2W n

high-performance power conditioning outlet

Protects equipment, cleans signal n

and speeds installation in pre-assembled package


cmA450™ Heavy-Duty, Above-Tile Suspended Ceiling kit

Heavy duty solution supports center, n

side and corner positions within a 2 x 2’ (600 x 600 mm) ceiling tile



Weight Capacity: 250 lbs n

(113.6 kg) center hole, 125 lbs (56.8 kg) side and corner holes

cmS445™ Suspended Ceiling Tile Replacement kit

Future-proofs installations by n

providing post-installation adjustments

Provides infinite column placement n

within a 2 x 2’ (600 x 600 mm) ceiling tile

WireVice cable suspension n

system for quick and easy tie-off


accessories

CEILING ADAPTERS


suspended cMS440 & cMA470

suspended cMS445


CAll800.582.6480

FAX877.894.6918

Projector MoUnts

15

cmA300™ Pole Clamp Clamps to horizontal poles and n

transitions to vertical extension column

Pole Outside Diameter(s): 1.9-3.5” n

(48-89 mm)


cmA360™ i-Beam ClampClamps to I-beams and n

transitions to vertical extension column


cmS445P™ Suspended Ceiling Tile Replacement kit with Power Conditioner

Combines CMS445 with PX2W n

high-performance power conditioning outlet

Protects equipment, cleans signal n

and speeds installation in pre-assembled package


cmA455™ Heavy-Duty Suspended Ceiling Tile Replacement kit

Heavy-duty solution supports n

center column placement within a 2’ x 2’ (600 x 600 mm) ceiling tile




cmA470™ Above-Tile Storage Accessory

Provides storage for equipment n

above the suspended ceiling

Hinged door for easy access n

Compatible with CMS440, CMA440, n

CMA450 and CMA455 ceiling kits

cmA471™ Above-Tile large Storage Accessory

Provides storage for larger equipment n

above the suspended ceiling


Compatible with CMS440, CMA440, n

CMA450 and CMA455 ceiling kits

cmA180™ Below-Tile Storage Accessory Provides storage for equipment below the suspended ceiling n


Compatible with CMA450 and CMA455 ceiling kits n

STRUCTURAL ADAPTERS


truss cMA365 & cMA366

unistrut cMA372 & cMA110

accessories

POWER ACCESSORIES

PX2w™ Power Conditioner Outlet Wall or ceiling mounted outlet with n

integrated power conditioning

Filter removes more noise than many n

full-sized line conditioners

Non-volatile spike protection with LED n

protection indicator can potentially absorb thousands of spikes

Non-current limiting design passes full n

power on a regular circuit

Picture and sound available after n

protection stops until a replacement can be installed

Rated for 2160 joules n


CAll800.582.6480

FAX877.894.6918

Projector MoUnts

16

cmA362™ C Clamp Universal clamp for a variety of n

structures and transitions to vertical extension column

Clamp Range: up to 2.75” (70 mm) n

O.D. (including wood 2 x 4”)


cmA365™ Truss Ceiling Adapter Universal clamp for square, round, n

rectangular or I-beam truss

Clamp Range: 0.75-3” n

(19-76 mm) O.D.


cmA366™ Architectural Spanning Adapter

Spans truss systems and n

provides lateral shift capability

Span Distance: 5-18” (127-457 mm) n

Clamp Range: up to 2” (51 mm) n

O.D. or 1.9” (48 mm) square tubing


cmA372™ Offset Unistrut AdapterFeatures offset for transitioning n

cables out of extension columns

Includes spring nuts and bolts to n

attach to 1.63” (41 mm) unistrut


cmA165™ internal Joist Ceiling kitExpands to bridge ceiling n

joists and transition to vertical extension column

Joist Width: 16 or 24” n

(406 or 610 mm)


cmA385™ internal Joist MountExpands to bridge ceiling n

joists and transition to vertical extension column

Joist Width: 10-23” n

(254-584 mm)


wmA300™ Wall Mount Arm Extends from wall and transitions n

to vertical 3” (76 mm) extension column (included)

Extension: 18.25” (464 mm) n

Weight Capacity: 150 lbs n

(68 kg) concrete, 125 lbs (56.8 kg) wood stud

cmS0XX™ Fixed Extension Columns

Aluminum extension n

columns feature easy installation and maximum strength

Flow-through cable management n

with cable exit port (9” or longer)



accessories

EXTENSION COLUMNS


fixed & adjustable

model length

CMS003* 3” (76 mm)

CMS006* 6” (152 mm)

CMS009 9” (229 mm)

CMS012 12” (305 mm)

CMS018 18” (457 mm)

model length

CMS024 2’ (0.6 m)

CMS036 3’ (0.9 m)

CMS048 4’ (1.2 m)

CMS060 5’ (1.5 m)

CMS072 6’ (1.8 m)

* Steel construction.


CAll800.582.6480

FAX877.894.6918

Projector MoUnts

17

cmA640™ Decorative Ring for Columns

Conceals pass-through hole cut n

in ceiling structure for extension column

Hinged design for new or retrofit n

installations

Clamp Range: 1.9” (48 mm) O.D. n

Available in black, chrome n

and white

cmA642™ Decorative Ring for Columns

Conceals pass-through hole n

cut in ceiling structure for outer adjustable extension column

Hinged design for new or retrofit n

installations

2.44” (62 mm) O.D. n

cmA170™ Storage Accessory Clamps on to columns for storage n

of electronic components

Mounts horizontally or vertically n


cmA270™ CouplerConnects two extension columns n

for extended lenght applications



cmS0XX0XX™ Adjustable Extension Columns

Aluminum extension columns n

feature notched design for adjustment without disassembly

Flow-through cable management n

with cable exit port (12” or longer)



cmA274™ Cable Cover for Columns

Snap-on cover for routing cables n

alongside extension columns

Hides cables for a clean appearance n

CMA275: Kit of four CMA274 n

cmA340™ Stabilization kit for Columns

Cable system attaches to extension n

column for increased rigidity

Includes one pole clamp, four cables n

and four turnbuckes


accessories

model length

CMS006009 6-9” (152-229 mm)

CMS009012 9-12” (229-305 mm)

CMS012018 12-18” (305-457 mm)

CMS018024 18-24” (457-610 mm)

CMS0203 2-3’ (0.6-0.9 m)

CMS0305 3-5’ (0.9-1.5 m)

model length

CMS0406 4-6’ (1.2-1.8 m)

CMS0507 5-7’ (1.5-2.1 m)

CMS0608 6-8’ (1.8-2.4 m)

CMS0709 7-9’ (2.1-2.7 m)

CMS0810 8-10’ (2.4-3.1 m)

CMS0911 9-11’ (2.7-3.4 m)

CMS1012* 10-12’ (3.1-3.7 m)* Cannot ship by UPS due to length.

COLUMN ACCESSORIES


cable management cMA274

stability cMA340

IN-LINE COLUMN ADAPTERS


vibrationcMA347

electricalcMA504


CAll800.582.6480

FAX877.894.6918

Projector MoUnts

18

cmA152™ Coupler with Cable Port Connects two extension columns and n

integrates a cable exit port


cmA351™ Coupler with Swivel Connects two extension columns n

with swivel capability

Swivel Range: 0-330º (with n

limited adjustment)


cmA160™ installation Job Box Coupler

Connects two extension columns n

with storage space for electronic equipment

Features outlet knockouts n

and plenum rating


cmA347™ Vibratio isolating Coupler

Connects two extension columns n

and isolates vibration transmitted to lower column

Patented design isolates n

vibration to reduce image movement

Weight Capacity: 0-15 lbs n

(0-6.8 kg) or 15-35 lbs (6.8-15.9 kg)

cmA151™ Adapter/ReducerAdapts 1.5” NPT coupler n

to 1” NPT column


cmA251™ Adapter/ReducerAdapts 2” NPT coupler n

to 1.5” NPT column


cmA273™ End CapCovers the end of extension column for clean appearance n

cmA278™ Vinyl End CapCovers the end of extension column for clean appearance n

Pre-cut for routing cables through cover n

Ten caps per kit n

cmA502™ Electrical Outlet CouplerConnects two extension columns and supports one n

electrical outlets


1-1/2” NPT n

Black n

cmA504™ Electrical Outlet CouplerConnects two extension columns and supports two n

electrical outlets


1-1/2” NPT n

Black n

accessories


CAll800.582.6480

FAX877.894.6918

Projector MoUnts

19

Pg1A™ large Projector Guard Fully encloses projector in locked n

cage to prevent theft or damage

Adjustable front opening to n

accommodate different lens positions


Projector Sizes: RPA - 20.4 x 7.5 x n

20” (518 x 190 x 508 mm), RPM - 20.4 x 6.5 x 20” (518 x 165 x 508 mm)


Pg2A™ large Projector Guard Fully encloses projector in locked n

cage to prevent theft or damage

Adjustable front opening to n

accommodate different lens positions


Projector Sizes: RPA - 16 x 7.5 x 16” n

(406 x 190 x 406 mm), RPM - 16 x 6.5 x 16” (406 x 165 x 406 mm)


Pl1™ RPA large Projector lock Conceals projector connection n

points and adds keyed locking to RPA installations

Three unique locks available n

(PL1A, PL1B, PL1C)

Pl2™ RPA Small Projector lock Adds keyed locking to RPA n

installations

Three unique locks available (PL2A, n

PL2B, PL2C)

hc1™ Heavy-Duty Cable System Security cable system with adhesive n

pads and SA1 security anchor

Includes security anchor, vinyl- n

coated cable, 40 mm padlock, two security pads with rotating cable fasteners, and a tube of instant adhesive

lSb100™ RPA or RPM Projector lateral Shift Bracket

Allows lateral shift of projector n

when used with RPA or RPM mounts

Maintains quick disconnect feature n

and includes All-Points Security

Shift Range: 0-3” (0-76 mm) n

or 3-5.25” (76-133 mm)


at 0-3” or 15 lbs (6.8 kg) at 3-5.25”

lSb101™ RPM with Q-lock Projector lateral Shift Bracket

Allows lateral shift of projector n

when used with RPM mounts

Maintains quick disconnect feature n

and includes All-Points Security

Shift Range: 0-3” (0-76 mm) n


tmA100™ Projector Tripod Mount Converts a standard tripod into n

a projector stand

Connects SLB custom or n

universal interfaces (not included)


cmA250™ lCDA Flush Mount AdapterAdds flush mount capability to an LCDA projector mount n

lPk1™ VCM Flush Mount AdapterAdds flush mount capability to an VCM projector mount n

cmA290™ Wire Suspension locks Combine with flexible wire rope to hang various equipment n

One-way clamp mechanism and quick-release lever for n

ease of installation

Ten clamps per kit n

accessories

SECURITY


classroomPG2A

OTHER INSTALLATION ACCESSORIES


CAll800.582.6480

FAX877.894.6918

Projector MoUnts

20

SA1™ Security Anchor Provides secure anchor point to n

1.5” NPT pipe, truss or other structure

Security shroud held in position by n

cable or padlock (not included)

lc1™ Cable System Security cable system with adhesive n

pads for securing sensitive equipment

Includes 6’ (1.8 m) coiled cable, two n

steel security pads, instant adhesive and a 30 mm padlock

Pl4™ Cable lock Security cable system with 3M adhesive-backed steel pad for n

securing sensitive equipment

Seamless lock housing with a seven-pin tumbler locking mechanism n

(two keys provided)

SSc™ Secure Screw Cover kits Prohibit access to equipment n

mounting screws with cable or padlock (not included)

SSC1: 3 covers for screws up to n

#10 (M5), SSC2: 3 covers for screws up to 0.25” (M6), SSC3: 3 covers for screws up to 0.31” (M8), SSC4: for RPA projector mounts

PmSc™ Security Cable lockUse with security projector mounts n

to deter theft attempts by tearing out projector inserts

One-way clamp mechanism and n

quick-release lever for ease of installation

Includes two locks and two cables n

with protective tubing

Sec2™ Security Cable kit for New SlBU

Use with RPA series or RPA Elite n

series mounts with new SLBU for additional security

One-way clamp mechanism and n

quick-release lever for ease of installation

Includes two locks and two cables n

lcd2c™ Dual Projector Ceiling Stacker

Ceiling mount accessory for n

two vertically-stacked projectors

Requires two RPA or RPM n

projector mounts

Projector Width: 18” (457 mm) n


lcd2tS™ Dual Projector Table Stand Stacker

Table stand accessory for two n

vertically-stacked projectors

Requires two RPA or RPM n

projector mounts

Projector Width: 18” (457 mm) n


lcdb™ Stacker BaseUse with extension columns to create custom table stand projector n

stacker system

Max Column Length: 3’ (0.9 m) n


lcdPA™ Stacker ArmUse with extension columns to create custom projector n

stacker system

Attaches to RPA or RPM projector mounts n


lcdcP™ Stacker Ceiling PlateUse with extension columns to create custom table stand projector n

stacker system

Max Column Length: 6’ (1.8 m) n


accessories

PROJECTOR STACKERS


CAll800.582.6480

FAX877.894.6918

Projector MoUnts

21

kitPd0XX0XX™ Projector Flat Ceiling kit

KITPD012018 includes RPAU, n

CMS012018, CMS115


CMS0203, CMS115


CMS0305, CMS115

kitPS003™ Projector Suspended Ceiling kit

KITPS003 includes RPAU, n

CMS003, CMS440

kitPS012c™ Projector Suspended Ceiling kit Includes RPAU, CMS012018, CMS440, CMA170 n

kitQS012c™ Projector Suspended Ceiling kit Includes RPMAU, CMS012, CMS440, CMA170 n

accessories

PROJECTOR KITS

kiteS003™ Projector Suspended Ceiling kit

Includes RPMU, CMS003, CMS440 n

kiteS003P™ Projector Suspended Ceiling kit Includes RPMU, CMS003, CMS440, CMA470 n

kitlS003™ Projector Suspended Ceiling kit

Includes RPMA1, CMS003, CMS440 n

kitlS012018™ Projector Suspended Ceiling kit

Includes RPMA1, CMS012018, CMS440 n

kitPA018024™ Projector Angled Ceiling kit

Includes RPAU, CMS018024, CMA395 n

kitPd003™ Projector Flat Ceiling kit

Includes RPAU, CMS003, CMS115 n


CAll800.582.6480

FAX877.894.6918

22

NOTES

23


CAll800.582.6480

FAX877.894.6918

fla

t p

an

el m

ou

nt

s

FlaT PaNEl MOuNTS

FlaT Pa

NE

l MO

uN

TS


CAll800.582.6480

FAX877.894.6918

FlaT PaNEl MOuNTS

24

TablE OF cONTENTS

QuIcK REFERENcE cHaRT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 - 29

SWING aRM Wall MOuNTS PDR™ 42 - 71” wall mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

PNR™ 42 - 71” wall mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

PWR™ 30 - 55” wall mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

MWR™ 30 - 50” wall mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

MPW™ 26 - 50” wall mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

JWD™ 26 - 45” lCD wall mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

FWD™ 10 - 32” lCD wall mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

IN-Wall MOuNTS PIWRF™ 42 - 71” In-wall SwInG aRm mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Pac501™ & PNRIW™ 42 - 71” In-wall BoX & SwInG aRm mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

MIWRF™ 30 - 50” In-wall SwInG aRm mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Pac501™ & MWRIW™ 30 - 50” In-wall BoX & SwInG aRm mount . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Mac501™ & JWDIW™ 26 - 40” In-wall BoX & SwInG aRm mount . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Fac501™ & FWDIW™ 20 - 26” In-wall BoX & SwInG aRm mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

FIXED Wall MOuNTS XSM™ 55 - 75” mICRo-aDJuStaBlE mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 OTHER PRODucT OPTIONS PSH2000™ HEaVY DutY FIXED wall mount

PSMT™ 26 - 65” tHInStall™ mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

lSM™ 37 - 63” mICRo-aDJuStaBlE wall mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 OTHER PRODucT OPTIONS PST™ 42 - 63”+ FIXED wall mount

lSa™ 37 - 63” wall mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 OTHER PRODucT OPTIONS RlF™ FIXED RaIl wall mount

FlaT PaNEl MOuNTSTablE OF cONTENTS

MSM™ 26 - 47” mICRo-aDJuStaBlE mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 OTHER PRODucT OPTIONS MSRu™ unIVERSal FIXED wall mount (uP to 50”)

MSa™ 26 - 47” wall mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 OTHER PRODucT OPTIONS MSRV™ FIXED wall mount (uP to 40”) RMF™ FIXED RaIl wall mount (uP to 40”)

FSR™ 10 - 32” FIXED wall mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

TIlT Wall MOuNTS XTM™ 55 - 75” mICRo-aDJuStaBlE tIlt mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 OTHER PRODucT OPTIONS PPH2000™ HEaVY DutY, PItCH-aDJuStaBlE wall mount

lTM™ 37 - 63” mICRo-aDJuStaBlE tIlt mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 OTHER PRODucT OPTIONS PlP™ 42 - 71” Pull-n-tIlt™ wall mount PWc™ tIlt wall mount wItH CPu StoRaGE

lTa™ 37 - 63” tIlt wall mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 OTHER PRODucT OPTIONS PRO™ 42 - 71” tIlt wall mount RlT™ 30 - 60” tIlt RaIl mount

lTaPu™ 37 - 63” PoRtRaIt tIlt wall mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 OTHER PRODucT OPTIONS PST16™ PoRtRaIt/lanDSCaPE FIXED wall mount PRO16™ PoRtRaIt/lanDSCaPE tIlt wall mount PlP16™ PoRtRaIt/lanDSCaPE tIlt wall mount

MTM™ 26 - 47” mICRo-aDJuStaBlE tIlt mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 OTHER PRODucT OPTIONS MTRu™ 30 - 50” tIlt wall mount RMT™ tIlt wall mount wItH CPu StoRaGE (uP to 40”)

FTR™ 10 - 32” tIlt wall mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57


CAll800.582.6480

FAX877.894.6918

25


CAll800.582.6480

FAX877.894.6918

26

FlaT PaNEl MOuNTSTablE OF cONTENTS

cEIlING MOuNTS PcS™ 42 - 71” SInGlE CEIlInG mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

McS™ 30 - 55” SInGlE CEIlInG mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

JHS™ 26 - 45” SInGlE CEIlInG mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

FHS™ 13 - 23” SInGlE CEIlnG mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

caRTS & STaNDS PFc™ 42 - 71” moBIlE CaRt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

MFc™ 30 - 55” moBIlE CaRt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

PF1™ 42 - 71” FlooR StanD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

MF1™ 30 - 55” FlooR StanD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

MSS™ 30 - 50” taBlE StanD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

MTS™ 30 - 50” SECuRItY taBlE StanD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

MPO™ 15 - 40” Pull-out taBlE StanD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

TRuSS & POlE MOuNTS TPS™ 30 - 61” FIXED tRuSS mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

TPM™ 30 - 61” tIltInG PolE mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

JPP™ 26 - 45” PIVot/tIlt PolE mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

DEcORaTIVE FRaMES & ENclOSuRES DFK™ 32 - 50” DESIGnER FRamES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

FlaT PaNEl accESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73-76


CAll800.582.6480

FAX877.894.6918

FlaT PaNEl MOuNTS

27

HoW to oRDeR

oRDeRInG tIps


E-MAil orders@chiefmfg .com

oPtIonS StEPS

oRDERInG oPtIonS tIPS

TIPS & TOOlS

Chief’s flat panel mounting solutions involve a varied set of ordering options .

For ordering details specific to an individual flat panel mount, visit the product page at www .chiefmfg .com and click on the ordering Info tab .

CustoM PDRXXXX (Black)- See mountFinder Pro for specific model for your flat panel mount

univErsAlPDRu (Black) or PDRuS (Silver) - See mountFinder Pro to ensure flat panel mount compatibility with this universal mount

SPEcIFY cOMPlETE MODEl NuMbER Your Chief flat panel model number will end in a “u” if a universal interface is desired (i.e. plpu), or a four digit code if a custom interface is selected (i.e. plp2051). It is also necessary to indicate color preference when appropriate – B for black, s for silver, W for white (i.e. pDRuB).

DON’T FORGET THE accESSORIES from in-wall boxes and speaker adapters to integrated power accessories, Chief offers a full line of flat panel mount accessories that truly simplify installation. (tip: look for recommended accessories on the individual product pages throughout this catalog.)

FlaT PaNEl cOMPaTIbIlITY Chief mounts are compatible with virtually every flat panel tV on the market. television manufacturers use 2 different methods when designing the back of their flat panel tVs (Vesa® and Random) so they can be mounted.

PaTENTED TEcHNOlOGY look for Chief’s exclusive patented features, including Centris™ fingertip tilt and Q-latch™ technology, that help to ensure a hassle-free installation and end-user experience.

XPRESSSHIP™ for projects requiring expedited delivery, look for products noted with Chief’s Xpressship™ logo, guaranteeing same or next-day shipping. for a complete list of Xpressship products, visit the literature Downloads page on www.chiefmfg.com to download a pDf of the Xpressship flyer.

STEP 1 to determine a mounting solution for your application, visit www.chiefmfg.com to access Chief’s mountBuilder™ and mountfinder pro™. or contact our experienced Customer service team for in-depth, personalized service.

STEP 2 Choose from custom or universal mount options, along with the appropriate accessories needed for your installation.

STEP 3 fax or e-mail in your order.

call customer Service 1 .800 .582 .6480 (domestic) 952 .894 .6280 (international)

Visit our Website www .chiefmfg .com

TablE OF cONTENTSQuIcK REFEREcE cHaRTFlaT PaNEl MOuNTS

ScREEN SIzE (inches)10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65

PSM/PSMT w: 175 lBS

PST w: 200 lBS

LSA/LSM w: 200 lBS

RLF1 w: 175 lBS

MSR w: 125 lBS

MSA/MSM w: 125 lBS

RMF1 w: 100 lBS

PRO w: 200 lBS t: ±15˚

LTA/LTM w: 200 lBS t: 0˚-12˚

PLP w: 200 lBS t: ±15˚

RLT1 w: 175 lBS t: ±15˚

MTR w: 125 lBS t: 15˚

MTA/MTM w: 125 lBS t: 0˚-12˚

RMT1 w: 100 lBS t: ±15˚

MWC w: 100 lBS

PWR w: 125 lBS

PNR w: 200 lBS

PDR w: 200 lBS

MWR w: 125 lBS

JWP w: 75 lBS

JWS w: 75 lBS

JWD w: 75 lBS

FWP w: 40 lBS

FWS w: 40 lBS

FWD w: 40 lBS

FWV w: 25 lBS

FWG w: 25 lBS

PAC501 w: 200 lBS

MAC501 w: 75 lBS

TPS/TPM w: 150 lBS

FAC501

FTR w: 45 lBS

XFM/XTM w: 250 lBS

FSR w: 45 lBS

RECESSED mountS

tRuSS/PolE mountS

SwInG aRm mountS

FIXED & tIlt mountS

FlaT PaNEl MOuNTSQuIcK REFERENcE cHaRT

ScREEN SIzE (inches)10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65

PCS w: 175 lBS t: +5˚, -20˚

MCS w: 100 lBS t: +5˚, -20˚

MCD w: 100 lBS t: +5˚, -20˚

PFC w: 200 lBS

PF1 w: 200 lBS

PF2 w: 400 lBS

PPC w: 200 lBS

MFC w: 125 lBS

MSS w: 125 lBS

MTS w: 200 lBS

MPO w: 200 lBS

CM1 w: 125 lBS

CM2 w: 75 lBS

CM3 w: 75 lBS

CM4 w: 75 lBS

CM5 w: 15 lBS

CM7 w: 180 lBS

CM8 w: 150 lBS

MF1 w: 125 lBS MF2 w: 250 lBS

JHS w: 100 lBS

FHS w: 100 lBS

FHP w: 40 lBS w: +5 ,̊ -15˚

MFC w: 125 lBS t: +5˚, -20˚

PCD w: 300 lBS t: +5˚, -15˚

KTP/KMA

KCS/KCD w: 40 lBS

KGL110 w: 15 lBS

KCY220 w: 40 lBS

KCV/KCG w: 200 lBS

KGL220 w: 15 lBS on tray w: 25 lBS on arm

CEIlInG mountS

automatED mountS

multI-monItoR

DESK mountS

CaRtS & StanDS

MountFinder™ Pro

See mountFinder at www .chiefmfg .com for detailed mount compatibility . Search by mFG or Chief model # .


CAll800.582.6480

FAX877.894.6918

SWING aRM MOuNTS

speCIfICatIons

featuRes

teCHnICal DRaWInGs

WHat You neeD to KnoW

ReCommenDeD aCCessoRIes

30

PDR™ 42 - 71" wall mount

CEntris™ FingErtip tilt Select the perfect tension for your screen’s center of gravity to achieve smooth fingertip tilt . Screen angle stays set until you decide to re-adjust .

post-instAllAtion HEigHt AdjustMEnt adjust height up to 1” (25 mm) after mount is installed for ultimate flexibility .

CliCkConnECt™ tECHnologY PatEnt-PEnDInG an audible click confirms flat panels are locked in place . Easy to connect/disconnect - no tools needed! Protect display by adding a padlock .

EXtEnds up to 37” Extends up to 37” (940 mm) for viewing from any angle!

CAblEtrAC™ sYstEM Channeled cable management provides quick and easy routing of cables .

1

2

3

4

5

* The range of adjustment will vary with different size screens

** Dimensions don’t include interface bracket

extension 37” (940 mm)

tilt*/Roll +5˚, -17˚/ ±2.5˚

Height adjustment 1.25” (32 mm)

Dimensions** 22.04” x 39.5” x 3.4” (HxWxD) (56 x 100.3 x 8.6 cm)

Color Black, silver


24

5

for a complete list of flat panel mount accessories see page 73.

Paccc1 n Center Channel speaker adapter

PaclR1 n left/Right speaker adapter

16” (406 mm)

19 .69” (500 mm)

1 .82” (46 mm)

1” (25 mm)

7” (178 mm)

ORDERING OPTIONS available in custom and universal.

• pDRu = universal 42 - 63”

• pDR-XXXX = Custom (see mountfinder at www.chiefmfg.com)

31


CAll800.582.6480

FAX877.894.6918

SWING aRM MOuNTS

speCIfICatIons

teCHnICal DRaWInGs



featuRes

31

PNR™ 42 - 71” wall mount

CEntris™ FingErtip tilt Select the perfect tension for your screen’s center of gravity to achieve smooth fingertip tilt . Screen angle stays set until you decide to re-adjust .

post-instAllAtion HEigHt AdjustMEnt adjust height up to 1” (25 mm) after mount is installed for ultimate flexibility .


EXtEnds up to 25” Extends over 25” (635 mm) for viewing from any angle!s


1

2

3

4

5

* The range of adjustment will vary with different size screens

** Dimensions don’t include interface bracket

extension 25” (635 mm)

tilt*/Roll +5˚, -17˚/ ±2.5˚

Height adjustment 1” (25 mm)

Dimensions** 22.04” x 27.06” x 3.25” (HxWxD) (560 x 687 x 83 mm)

Color Black, silver


2

4

5




3 .25” (83 mm)

27 .06” (687 mm)

25” (635 mm)


• pnRu = universal 42 - 63”

• pnR-XXXX = Custom (see mountfinder at www.chiefmfg.com)

31


CAll800.582.6480

FAX877.894.6918

SWING aRM MOuNTS

speCIfICatIons

featuRes

teCHnICal DRaWInGs



32

PWR™ 30 - 55" wall mount





extension 24.88” (632 mm)

tilt/Roll +5˚, -15˚/ ±2.5˚

Dimensions* 18” x 23.63” x 3.38” (HxWxD) (457 x 600 x 86 mm)

Color Black, silver


CEntris™ FingErtip tilt Effortlessly adjust display using Centris finger-tip tilt technology . Screen angle stays set until you decide to re-adjust .


EXtEnds up to 24.88” Extends up to 24 .88” (632 mm) for viewing from any angle!


1

2

3

4

15 .65” (397 mm)

.24” (6 mm)

16” (406 mm)

8 .89” (226 mm)

1”(25 mm)

7”(178 mm)

ORDERING OPTIONS available in Custom and universal.

• pWRu = universal 30 - 50”

• pWR-XXXX = Custom (see mountfinder at www.chiefmfg.com)

2

4

3

1


CAll800.582.6480

FAX877.894.6918

SWING aRM MOuNTS

speCIfICatIons

teCHnICal DRaWInGs



featuRes

33

MWR™ 30 - 50" wall mount






tilt/Roll +5˚, -15˚/ ±2.5˚

Dimensions* 18” x 23.63” x 3.38” (HxWxD) (457 x 600 x 86 mm)

Color Black, silver


CEntris™ FingErtip tilt Effortlessly adjust display using Centris finger-tip tilt technology . Screen angle stays set until you decide to re-adjust .


EXtEnds up to 24.88” Extends up to 24 .88” (632 mm) for viewing from any angle!


1

2

3

4

1”(25 mm)

7”(178 mm)

15 .65” (397 mm)

2 .39” (61 mm)

16” (406 mm)

8 .89” (226 mm)

MWH swing arm Wall mount (up to 42”)

1

3

4

2


• mWRu = universal 30 - 50”

• mWRV = Vesa 100 x 100mm, 100 x 200 mm, 200 x 200 mm and 400 x 400 mm patterns

• mWR-XXXX = Custom 26 - 40” (see mountfinder at www.chiefmfg.com)

OTHER PRODucT OPTION


CAll800.582.6480

FAX877.894.6918

SWING aRM MOuNTS

speCIfICatIons

featuRes

teCHnICal DRaWInGs



34

MPW™ 26 - 50" wall mount




sMootH EXtEnsion Extends (8 .75” 222 mm) to achieve ideal viewing angle .

low proFilE Designed to ensure mount remains concealed behind the screen .

intEgrAtEd lAtErAl sHiFt Reposition mount left or right after installation for ultimate positioning flexibility .

sMootH swivEl Smooth swivel up to 45º in either direction .

1

2

3

4



swivel up to 45˚

Depth from Wall 1.5” (38 mm)

Dimensions* 16.3” x 18” x 1.5” (HxWxD) (414 x 457 x 38 mm)

Color Black



• mpWu = universal 30 - 50”

• mpWV = Vesa 100 x 100mm, 100 x 200 mm, 200 x 200 mm and 400 x 400 mm patterns

• mpW6000 + msB6XXX = Custom (see mountfinder at www.chiefmfg.com)

2

4

3

1

8”(203 mm)

16”(406 mm)

7 .78”(198 mm)

16 .3”(414 mm)


CAll800.582.6480

FAX877.894.6918

SWING aRM MOuNTS

speCIfICatIons

teCHnICal DRaWInGs



featuRes

35

JWD™ 26 - 45” lCD wall mount

CEntris™ FingErtip tilt PatEntED FEatuRE Provides smooth fingertip tilt in all directions using the screen’s center of gravity . Screen angle stays set until you decide to re-adjust .

sMootH EXtEnsion Extends 20 .38” (518 mm) to achieve ideal viewing angle .

CAblE MAnAgEMEnt Easily route cables through predefined pathway inside arms .

1

2

3



tilt ±15˚

swivel up to 180˚


Color Black, silver

Weight Capacity 75 lbs (34 kg)

3 .94”(100 mm)

3 .94”(100 mm)

1 .03”(26 .2 mm)

14 .7”(373 mm)

8 .69”(220 .6 mm)

4 .75”(120 .6 mm)

Home tHeateR applICatIon

3

2

1


• JWDV = Vesa 100 x 100mm, 100 x 200 mm, 200 x 200 mm and 400 x 200 mm patterns

• JWD210 + msB6XXX = Custom 26 - 45” (see mountfinder at www.chiefmfg.com)

• JWDu – Vesa patterns up to 400 x 400 mm


JWP pivot/tilt Wall mount

JWS single arm Wall mount


CAll800.582.6480

FAX877.894.6918

SWING aRM MOuNTS

speCIfICatIons

featuRes

teCHnICal DRaWInGs



36

FWD™ 10 - 32” lCD wall mount

CEntris™ FingErtip tilt PatEntED FEatuRE Provides smooth fingertip tilt in all directions using the screen’s center of gravity . Screen angle stays set until you decide to re-adjust .

AdvAnCEd displAY Mounting teardrop hole pattern makes mounting the screen quick and easy .

sMootH EXtEnsion Extends 15 .94” (405 mm) to achieve ideal viewing angle .


1

2

3

4

FWP pivot/tilt Wall mount



tilt ±15˚

swivel 180˚


Color Black, silver


12 .2” (310 mm)

7 .64” (194 mm)

3 .94” (100 mm)

2 .95” (75 mm)

5 .67” (144 mm)

tilts+/- 15º

Home tHeateR applICatIon


• fWDV = universal/Vesa 75 x 75 mm and 100 x 100 mm patterns

• fWD110 = Custom 26 - 45” (see mountfinder at www.chiefmfg.com)


FWS single arm Wall mount

2

4

3

1


CAll800.582.6480

FAX877.894.6918

37

NOTES


CAll800.582.6480

FAX877.894.6918

In-wall mounts

SPECIFICATIONS

FEATURES

TECHNICAL DRAWINGS



38

5.54”(141 mm)

PIwRF™ In-Wall SWIng arm

LimitLess Centering Center flat panel at any position on wall between 16” center studs without cutting studs. no header/footer necessary!

Low ProfiLe Designed to ensure mount remains concealed behind the screen.

Centris™ fingertiP tiLt low-profile design uses the center of gravity to achieve smooth fingertip tilt. Screen angle stays set until you decide to re-adjust.

CLiCkConneCt™ teChnoLogy Patent-PenDIng an audible click confirms flat panels are locked in place. easy to connect/disconnect - no tools needed! Protect display by adding a padlock.

1

2

3

4

oRdeRIng InFoRmatIon

The PIWRF kit includes in-wall box with integrated swing arm – no other parts necessary. Available in Universal or Custom:

• Universal:Order PIWRFUB

• CUstom:Order PIWRF2000B + PSB-xxxx See MountFinder™ PRO on www.chiefmfg.com for custom PSB model numbers.

For 30 - 50” screens see MIWRF™ on page 40.


Roll +/-2˚

Tilt 15˚

Swivel 40˚ Left/Right

Extension 15” (381 mm)


Color Black


4

1

3

2

PaCCC1 n Center Channel Speaker Adapter

PaClr1 n Left/Right Speaker Adapter 22.82”(580 mm)

19.01”(483 mm)

20.34”(517 mm)

11.53”(293 mm)*

*Allows ±1” height adjustment

20.03”(509 mm)

20.58”(523 mm)

42–71”FlatPanels

For a complete list of flat panel mount accessories see page 73.


CAll800.582.6480

FAX877.894.6918

In-wall mounts

SPECIFICATIONS

TECHNICAL DRAWINGS



FEATURES

39

PaC501™ & PnRIw™ In-Wall box & SWIng arm


smooth extension Contoured swing arms are designed for effortless extension of 22.4”(569 mm).

Centris™ fingertiP tiLt Select the perfect tension for your screen’s center of gravity to achieve smooth fingertip tilt. Screen angle stays set until you decide to re-adjust.


1

2

3

4

Roll +/-2˚

Tilt 17˚

Swivel* 76.5˚ Left/Right

Extension Range .62” - 22.4” (16 - 569 mm)

Box Dimensions 20” x 30” x 3.63” (HxWxD) (508 x 762 x 92 mm)

Color Black



PaChFk1 n Header/Footer Kit


PaCPC1 n Power Filter

2

4

1


PAC501 and PNRIW must be ordered separately. Available in Universal or Custom:

• Universal:Order PAC501 and PNRIWUB

• CUstom:Order PAC501, PNRIW2000B + PSB-xxxx See MountFinder™ PRO on www.chiefmfg.com for custom PSB model numbers.

steP-by-stePinstallation:PaChFk1™header/Footerkit

20”(508 mm)

30”(762 mm)

C/l of 14”mounting

Pattern

0.62”(16 mm)

3.63”(92 mm)


3

* With 42” flat panel. Swivel range varies with screen size.


CAll800.582.6480

FAX877.894.6918

In-wall mounts

SPECIFICATIONS

FEATURES

TECHNICAL DRAWINGS



40

mIwRF™ In-Wall SWIng arm

LimitLess Centering Center flat panel at any position on wall between 16” center studs without cutting studs. no header/footer necessary!


Centris™ fingertiP tiLt low-profile design uses the center of gravity to achieve smooth fingertip tilt. Screen angle stays set until you decide to re-adjust.


1

2

3

4


Roll +/-2˚

Tilt 15˚

Swivel 37˚ Left/Right

Extension 9.9” (251 mm)


Color Black


4

2

1



The MIWRF kit includes in-wall box with integrated swing arm – no other parts necessary. Available in Universal or Custom:

• Universal:Order MIWRFUB

• CUstom:Order MIWRF6000B + MSB6-xxx See MountFinder™ PRO on www.chiefmfg.com for custom MSB model numbers.

For 42 - 71” screens see PIWRF™ on page 38.




PaClr1 n Left/Right Speaker Adapter

3

*Allows ±1” height adjustment

17.2”(437 mm)

13.38”(340 mm)

20.34”(517 mm)

8.95”(227 mm)*

14.38”(365 mm)

14.96”(380 mm)


CAll800.582.6480

FAX877.894.6918

In-wall mounts

SPECIFICATIONS

TECHNICAL DRAWINGS



FEATURES

41

PaC501™ & mwRIw™ In-Wall box & SWIng arm


smooth extension Contoured swing arms are designed for effortless extension of 22”(559 mm).

Centris™ fingertiP tiLt effortlessly adjust display using Centris finger-tip tilt technology. Screen angle stays set until you decide to re-adjust.


1

2

3

4

Roll +/-2˚

Tilt 15˚

Swivel* 60˚ Left/Right

Extension Range .5” - 22” (13 - 559 mm)

Box Dimensions 20” x 30” x 3.63” (HxWxD) (508 x 762 x 92 mm)

Color Black



1

4

2

PaC501™ & PwRIw™ In-Wall Box Accessory and Swing Arm Mount


PAC501 and MWRIW must be ordered separately. Available in Universal or Custom:

• Universal:Order PAC501 and MWRIWUB

• CUstom:Order PAC501, MWRIW6000B + PSB-xxxx See MountFinder™ PRO on www.chiefmfg.com for custom PSB model numbers.

otherProdUCtoPtions





0.5”(12 mm)

3.63”(92 mm)

30”(762 mm)

15”(381 mm)

20”(508 mm)

10”(254 mm)

3



CAll800.582.6480

FAX877.894.6918

In-wall mounts

SPECIFICATIONS

FEATURES

TECHNICAL DRAWINGS



42

maC501™ & JwdIw™ In-Wall box & SWIng arm


Centris™ fingertiP tiLt PatenteD FeatUre Provides smooth fingertip tilt in all directions using the screen’s center of gravity. Screen angle stays set until you decide to re-adjust.

easy instaLLation Center flat panel at any position on wall between 16” center studs without cutting studs. no header/footer necessary!

smooth extension extends 21.2” (538 mm) to achieve ideal viewing angle.

1

2

3


MAC501 and JWDIW must be ordered separately. Available in Universal or Custom:

• Universal:Order MAC501 and JWDIW210B Compatible with VESA 100 x 100 mm and 200 x 200 mm. Also includes 200 x 400 mm interface.

• CUstom:Order MAC501, JWDIW210B + MSB-xxxx See MountFinder™ PRO on www.chiefmfg.com for custom MSB model numbers.

Roll +/-5˚

Tilt ±15˚



Box Dimensions 14.5” x 14.5” x 4.2” (HxWxD) (368 x 368 x 107 mm)

Color Black


3

4

1


26–40”lCds

2

14.5”(368 mm)

14.5”(368 mm)

5”(127 mm)

4.2”(107 mm)retracted

9.88”(251 mm)

4




CAll800.582.6480

FAX877.894.6918

In-wall mounts

SPECIFICATIONS

TECHNICAL DRAWINGS



FEATURES

43

FaC501™ & FwdIw™ In-Wall box & SWIng arm


Centris™ fingertiP tiLt PatenteD FeatUre Provides smooth fingertip tilt in all directions using the screen’s center of gravity. Screen angle stays set until you decide to re-adjust.

easy instaLLation Center flat panel at any position on wall between 16” center studs without cutting studs. no header/footer necessary!

smooth extension extends 17.2” (437 mm) to achieve ideal viewing angle.

1

2

3

4

Roll 360˚

Tilt ±15˚




Color Black



4

3

1

20–26”lCds

2


FAC501 and FWDIW must be ordered separately. Available in Universal or Custom:

• Universal:Order FAC501 and FWDIW110B Compatible with VESA 75 x 75 mm and 100 x 100 mm. Also includes 200 x 400 mm interface.

• CUstom:Order FAC501, FWDIW110B + FSB-xxxx See MountFinder™ PRO on www.chiefmfg.com for custom FSB model numbers.

10.5”(268 mm) 8.08”

(205 mm)

4.2” (107 mm)

retracted

14.5”(368 mm)

7.38”(187 mm)

7.38”(187 mm)




CAll800.582.6480

FAX877.894.6918

fixed wall mounts

SPECIFICATIONS

FEATURES

TECHNICAL DRAWINGS



44

xsm™ 55 - 75” MICRO-AdjustAble MOunt

Controlzone™ leveling Industry-first feature allows post-installation fine tuning of height and leveling, up to 1/2” adjustment up or down.

Centerless™ shift Provides up to 23.5” of post-installation lateral shift – 11.75” left/right of uprights – for limitless centering capabilities.

CliCkConneCt™ Hear an audible click when the screen safely engages with the mount.

Customizable aCCessory system A full line of supporting accessories can be integrated with the mount, extending the same adjustment benefits to the entire configuration.

multiple installation options Can be installed on 24”or 32” centers.

1

2

3

4


Max Lateral Shift 23.5” (597 mm)

Mounts on Studs 24” or 32” on-center

Dimensions 16.5” x 48.44” x 1.96” (HxWxD) (41.9 x 123 x 5 cm)

Max Mounting 25.6” (650 mm), height Pattern 48.6” (123.4 cm), width


Color Black


Px2w n Power Outlet Conditioner

PaC521P n In-Wall Box with Power Outlet Conditioner

fusion ComPonent shelf

5

1

4

Psh2000™ Heavy-Duty, Fixed Wall Mount– For flat panels over 65” or 200+ lbs

ordering oPtions Available in custom or universal. other ProduCt oPtions

5

RECOMMENDED CONFIGURATION

Psmh™ Heavy-Duty, Custom Fixed Wall Mount

2 3

Shipping January 2009!


CAll800.582.6480

FAX877.894.6918

fixed wall mounts

SPECIFICATIONS

TECHNICAL DRAWINGS



FEATURES

45

Psmt™ 26 - 65” tHInstAll™ MOunt

ultra-low profile less than the width of a penny, the PsMt is specially designed to compliment today’s thinnest flat panel tVs.

exClusive glide loCk™ latCh tool-less locking feature saves time and effectively secures flat panel to wall mount.

easy installation ships fully assembled.

integrated lateral shift Reposition mount left or right after installation for ultimate positioning flexibility.

1

2

3

* Dimensions vary depending on model number.

Dimensions* 10” x 25.25” x .49” (HxWxD) (254 x 641 x 12 mm)

Color Black



PaC520 n Multiple Option New Construction Pre-Wire Box

3

2

1

Psm™ Custom, Fixed Wall Mount

ordering oPtions PSMT mounts are built custom for each brand. Be sure to check Mount-Finder at www.chiefmfg.com for compatibility. other ProduCt oPtions

*PSMT2015 shown

4.5”(114 mm)

10”(254 mm)

25.25”(641 mm)

.49” (12 mm) Added depth

22.5”(572 mm)

16”(406 mm)




CAll800.582.6480

FAX877.894.6918

fixed wall mounts

SPECIFICATIONS

FEATURES

TECHNICAL DRAWINGS



46

lsm™ 37 - 63” MICRO-AdjustAble MOunt

Controlzone™ leveling Industry-first feature allows post-installation fine tuning of height and leveling.


CliCkConneCt™ Hear an audible click when the screen safely engages with the mount. A built-in cable stand provides easy access under the screen.


multiple installation options Can be installed on 16”, 20” and 24” centers.

1

2

3



Mounts on Studs 16”, 20”, 24” centers


Max Mounting 19.9” (506 mm), height Pattern 34.6” (879 mm), width


Color Black




fusion left/right sPeaker adaPter

34

5

1


Pst™ Fixed Wall Mount– For flat panels 42 - 63”+


2

4

5



CAll800.582.6480

FAX877.894.6918

fixed wall mounts

SPECIFICATIONS

TECHNICAL DRAWINGS



FEATURES

47

lsa™ 37 - 63” wAll MOunt




multiple installation options Can be installed on 16”, 20” and 24” centers.

1

2

3







Color Black


Px2w n New Construction Pre-Wire Box

3

4

1

rlf™ Fixed Rail Wall Mount


2

4


fusion left/right sPeaker adaPter



CAll800.582.6480

FAX877.894.6918

fixed wall mounts

SPECIFICATIONS

FEATURES

TECHNICAL DRAWINGS



48

msm™ 26 - 47” MICRO-AdjustAble MOunt

Controlzone™ leveling Industry-first feature allows post-installation fine tuning of height and leveling.




multiple installation options Installation options include: single- or dual-stud mounting on 16” centers.

1

2

3



Mounts on Studs single stud or 16” centers



Weight Capacity 75 lbs (34 kg), single stud 125 lbs (57 kg), dual stud

Color Black


3

4

5

2

ordering oPtions Available in custom and universal.

other ProduCt oPtions

fusion video ConferenCing shelf

1

4

5


msru™ Universal Fixed Wall Mount– For flat panels up to 50”





CAll800.582.6480

FAX877.894.6918

fixed wall mounts

SPECIFICATIONS

TECHNICAL DRAWINGS



FEATURES

49



msa™ 26 - 47” wAll MOunt




multiple installation options Installation options include: single- or dual-stud mounting on 16” centers.

1

2

3






Weight Capacity 75 lbs (34 kg), single stud 125 lbs (57 kg), dual stud

Color Black


fusion video ConferenCing shelf

3

4


1

2

4

msrv™ Fixed Wall Mount– For flat panels up to 40”

rmf™ Fixed Rail Wall Mount – For flat panels up to 40”





CAll800.582.6480

FAX877.894.6918

fixed wall mounts

SPECIFICATIONS

FEATURES

TECHNICAL DRAWINGS



50

fsr™ 10 - 32” wAll MOunt

Q-latCh™ mounting system Flat panel secures to mount with a latching flag. easy to connect/disconnect – no tools needed! Protect display by adding a padlock.

integrated lateral shift Reposition mount .5” (13 mm) left or right after installation for ultimate positioning flexibility.

1

2

Depth from Wall* .75” (19 mm)

Lateral Shift .5” (13 mm) Left/Right

Mounting Options Single Stud, Drywall

Dimensions* 7” x 6” x .75” (HxWxD) (178 x 152 x 19 mm)

Color Black

Weight Capacity 45 lbs (20.5 kg), stud 30 lbs (13.6 kg), drywall

1

2


• FSRV = VESA 75 x 75 mm and 100 x 200 mm patterns

• FSR-XXXX = Custom (see MountFinder at www.chiefmfg.com)

multiPle installation oPtions Choose either a single stud or drywall mounting system.

6”(152 mm)

.75”(19 mm)

7”(178 mm)

1.75”(44 mm)

6.25”(159 mm)

.54”(14 mm)





CAll800.582.6480

FAX877.894.6918

tilt wall mounts

SPECIFICATIONS

TECHNICAL DRAWINGS



FEATURES

51

Xtm™ 55 - 75” Micro-adjustable tilt Mount

Controlzone™ leveling industry-first feature allows post-installation fine tuning of height and leveling, up to .5” (13 mm) adjustment up or down.

Centris™ low-profile tilt centris fingertip tilt technology uses the center of gravity to balance the screen while maintaining a low profile under 2” deep! screen angle stays set in place until readjusted.


CliCkConneCt™ Hear an audible click when the screen safely engages with the mount.

1

2

3

4

Tilt* 0 -12˚

Max Lateral Shift 23.5” (597 mm) max

Mount on Studs 24” or 32” on-center

Dimensions 16.5” x 48.44” x 1.99” (HxWxD) (42 x 123 x 5 cm)


Color Black



1

4

2

PPH2000 Heavy-Duty, Pitch-Adjustable Wall Mountt

ordering oPtions Available in custom or universal.

multiPle installation oPtions Can be installed on 24” or 32” centers.


otHer ProduCt oPtion

PX2w n Power Outlet Conditioner


Fusion ComPonent sHelF


3


* Varies with screen height.


CAll800.582.6480

FAX877.894.6918

tilt wall mounts

SPECIFICATIONS

FEATURES

TECHNICAL DRAWINGS



52

ltm™ 37 - 63” Micro-adjustable tilt Mount




CliCkConneCt™ Hear an audible click when the screen safely engages with the mount. a built-in cable stand provides easy access under the screen.

1

2

3

4


Tilt 0 -12˚





Color Black


4

2

1


PlP 42 - 63” Pull-n-Tilt™ Wall Mount


multiPle installation oPtions Can be installed on 16”, 20” and 24” centers.


otHer ProduCt oPtions

PwC Tilt Wall Mount with CPU Storage

Fusion leFt/rigHt sPeaker adaPter




3



CAll800.582.6480

FAX877.894.6918

tilt wall mounts

SPECIFICATIONS

TECHNICAL DRAWINGS



FEATURES

53

lta™ 37 - 63” tilt Wall Mount


Centerless™ shift Provides up to 16” of post-installation lateral shift – 8” left/right of uprights – for limitless centering capabilities.


Customizable aCCessory system a full line of supporting accessories can be integrated with the mount, extending the same adjustment benefits to the entire configuration.

1

2

3

4


Tilt 0 -12˚

Max Lateral Shift 16” (406 mm)




Color Black




Fusion leFt/rigHt sPeaker adaPter

3

4

1

Pro 42 - 63” Tilt Wall Mount


multiPle installation oPtions Can be installed on 16”, 20” and 24” centers.



2

rlt 30 - 60” Tilt Rail Mount



CAll800.582.6480

FAX877.894.6918

tilt wall mounts

SPECIFICATIONS

FEATURES

TECHNICAL DRAWINGS



54

ltaPu™ 37 - 63” Portrait tilt Wall Mount

portrait installation enables vertical positioning of flat panel display, ideal for digital signage applications.


post-installation lateral shift Provides up to 11.5” of post-installation lateral shift – 5.75” left/right of uprights.

multiple installation options installation options include: single- or dual-stud mounting on 16” centers.

1

2

3

4




Tilt* 0 -12˚




Color Black

Weight Capacity 75 lbs (34 kg), single stud 125 lbs (56.7 kg), dual stud



COMMERCIAL APPLICATION

Pst16 Portrait/Landscape Fixed Wall Mount

2

1

4

3

Pro16 Portrait/Landscape Tilt Wall Mount

PlP16 Portrait/Landscape Tilt Wall Mount


* Varies with screen height.


CAll800.582.6480

FAX877.894.6918

tilt wall mounts

SPECIFICATIONS

TECHNICAL DRAWINGS



FEATURES

55

mtm™ 26 - 47” Micro-adjustable tilt Mount

Tilt 0 -12˚




Max Mounting 400 mm, height Pattern 26.25” (667 mm), width

Color Black




multiPle installation oPtions Installation options include: single- or dual-stud mounting on 16” centers.






1

2

3

4

Fusion video ConFerenCing sHelF




3

4

3

1

mtru 30 - 50” Tilt Wall Mount

mwC Tilt Wall Mount with CPU Storage (up to 40”)



CAll800.582.6480

FAX877.894.6918

tilt wall mounts

SPECIFICATIONS

FEATURES

TECHNICAL DRAWINGS



56

mta™ 26 - 47” tilt Wall Mount




Customizable aCCessory system a full line of supporting accessories can be integrated with the mount, extending the same adjustment benefits to the entire configuration.

Tilt 0 -12˚




Max Mounting 400 mm, height Pattern 26.25” (667 mm), width

Color Black



Fusion video ConFerenCing sHelF



1

2

3

4

3

4

2

1

mtrv 26 - 40” Tilt Wall Mount


multiPle installation oPtions Installation options include: single- or dual-stud mounting on 16” centers.

otHer ProduCt oPtion

rmt 26 - 40” Tilt Rail Mount



CAll800.582.6480

FAX877.894.6918

tilt wall mounts

SPECIFICATIONS

TECHNICAL DRAWINGS



FEATURES

57


2

1

1.95”(49.5 mm)

4.5”(114 mm)

tilts5º up5º down

1”(25 mm)

1.13”(28.7 mm)

3.26”(83 mm)

.85”(100 mm)

1.34”(75 mm)

5.4”(138 mm)

Ftr™ 10 - 32”tilt Wall Mount


Tilt +5˚, -15˚

Lateral Shift 0.5” (13 mm)

Dimensions* 5.4” x 5.33” x 1.95” (HxWxD) (138 x 136 x 49.5 mm)

Color Black

Weight Capacity 45 lbs (20.4 kg) stud 30 lbs (13.6 kg) drywall


Hole Pattern Criteria If your hole pattern does not match the VESA standard, call Customer Service at 1-800-582-6480 to determine which Chief mount fits your display.

multiPle installation oPtions Choose either a single stud or drywall mounting system.

installation Includes all mounting hardware.

Q-latCh™ mounting system Flat panel secures to mount with a latching flag. easy to connect/disconnect – no tools needed! Protect display by adding a padlock.

Centris™ fingertip tilt effortlessly adjust display using centris finger-tip tilt technology. screen angle stays set until you decide to re-adjust.

1

2



CAll800.582.6480

FAX877.894.6918

ceiling mounts

SPECIFICATIONS

FEATURES

TECHNICAL DRAWINGS



58

Pcs™ 42 - 71” Single ceiling Mount

Centris™ Fingertip tilt effortlessly adjust display using centris finger-tip tilt technology. Screen angle stays set until you decide to re-adjust.

CliCkConneCt™ teChnologY PAtent-PenDing An audible click confirms flat panels are locked in place for easy connect/disconnect. Supports optionsal security by adding a padlock.

post-installation leveling no tools needed. ultra fast and easy screen positioning with lock down capability.

portrait/landsCape CapabilitY Mounts in either portrait or landscape position.

Cable ManageMent easily route cables through 1-1/2” nPt extension column. columns sold seperatly.

1

2

3

4

5

Roll +/-2˚

Tilt +5˚/-20˚

Yaw 360˚

Color Black



cmA structurAl AdAPters

cms extension columns

PAc251 n Universal Storage Accessory

2

4

1.63” (41 mm)

15.63” (397 mm)

16.27” (413 mm)

11.73” (298 mm)

1.63” (41 mm)

.78” (20 mm)

.66” (17 mm)

3.31” (84 mm)

Pcm™ 42 - 71” Single Ceiling Mount with Angled Column

ordering oPtions Available in custom or universal. other Product oPtions

Pdc™ 42 - 71” Dual Ceiling Mount

1

5

3

8” (203 mm)


CAll800.582.6480

FAX877.894.6918

ceiling mounts

SPECIFICATIONS

TECHNICAL DRAWINGS



FEATURES

59



mcs™ 30 - 55” Single ceiling Mount


CliCkConneCt™ teChnologY PAtent-PenDing An audible click confirms flat panels are locked in place for easy connect/disconnect. Supports optionsal security by adding a padlock.



Cable ManageMent easily route cables through 1-1/2” nPt extension column.

1

2

3

4

5

Roll +/-2˚

Tilt +5˚/-20˚

Yaw 360˚

Color Black



mAc251 n Universal Storage Accessory

2

1

4

4.26” (108 mm)

25º of tilt 5º up

20º Down1” (25 mm)

5º

7.87” (200 mm)

11.02” (280 mm)

7.87” (200 mm)

10.15” (258 mm)

mcd™ 30 - 50” Dual Ceiling Mount


5

3

20º


CAll800.582.6480

FAX877.894.6918

ceiling mounts

SPECIFICATIONS

FEATURES

TECHNICAL DRAWINGS



60

Jhs™ 26 - 45” Single ceiling Mount

Centris™ Fingertip tilt Provides smooth fingertip tilt in all directions using the screen’s center of gravity. Screen angle stays set until you decide to re-adjust.




1

2

3

4

Roll +/-2˚

Tilt +/-15˚

Yaw 360˚

Color Black, Silver



4

1

2

6.59”(167 mm)

3.59”(91 mm)

c/l of VeSA pattern

100 mm VeSA pattern

6”(152 mm)

5.05”128 mm



cmA ceiling PlAtes

3

ordering oPtions Available in Custom and Universal.

• JHSV = VESA 100 x 100 mm, 200 x 100 mm, 200 x 200 mm and 400 x 200 mm patterns

• JHS-XXXX = Custom (see MountFinder at www.chiefmfg.com)

• JHSU = VESA patterns up to 400 x 400 mm


CAll800.582.6480

FAX877.894.6918

ceiling mounts

SPECIFICATIONS

TECHNICAL DRAWINGS



FEATURES

61

Fhs™ 13 - 23”Single ceiling Mount

Centris™ Fingertip tilt Provides smooth fingertip tilt in all directions using the screen’s center of gravity. Screen angle stays set until you decide to re-adjust.




1

2

3

4

Roll 360˚

Tilt +/-15˚

Yaw 360˚

Color Black, Silver



1

4

3.17”(81 mm)

c/l of VeSA pattern

4.55”(116 mm)

VeSA StAnDARD 75 mm & 100 mm

5.42”(138 mm)

4.63”(118 mm)



cmA ceiling PlAtes

FhP18110™ Ceiling Mount with 12 - 18” (30 - 46 cm) Extension


FhP110™ Ceiling Mount with 24 - 46” (61 - 117 cm) Extension

2

3


CAll800.582.6480

FAX877.894.6918

SPECIFICATIONS

FEATURES

TECHNICAL DRAWINGS



62

PFC™ 42 - 71” Mobile cart


telesCoping HeigHt Adjustment integrated knob provides tool-less telescoping adjustment from 4 ft. (120 cm) to 6 ft (180 cm).

CliCkConneCt™ teCHnologY PateNt-PeNDiNG an audible click confirms flat panels are locked in place. easy to connect/disconnect - no tools needed!

portrAit/lAndsCApe CApAbilitY Mounts in either portrait or landscape position.

CAble mAnAgement Flexible covers hide cables for a clean installation.

1

2

3

4

5

Dimensions* 37.13” x 80.25” x 32.13” (WxHxD) (94.3 x 204 x 81.6 cm)

Height 4 - 6’ (120 - 180 cm)

Tilt +/-15˚


Colors Black, Silver


PAC710 n Accessory Shelf

PAC720 n Dual Display Accessory

PAC700 n Travel Case

3

5

PFM Confidence Monitor Cart Height: 3 - 4’ (91 - 122 cm), Tilt: +15˚/+45˚

PFQ Confidence Monitor Cart Height: 2 - 2.5’ (61 - 76 cm), Tilt: +15˚/+45˚

About PFC™ Disassembles with one tool. Designed with lightweight aluminum its unique angled base makes corner positioning or nesting easy. Universal interface bracket sold with PFCU, custom interface brackets sold seperatly with PFC. other ProduCt oPtions

6.63”(173 mm)

2.5”(65 mm)1.5”

(39 mm)43.88”

(1115 mm)

33.63”(855 mm)

24.63”(626 mm)

15.63”(398 mm)

80.25”(2038 mm)

72.13”(1833 mm)

CArts & stAnds

2


(PAC710 Accessory Shelf not included)

1

4


CAll800.582.6480

FAX877.894.6918

SPECIFICATIONS

TECHNICAL DRAWINGS



FEATURES

63

MFC™ 30 - 55” Mobile cart


telesCoping HeigHt Adjustment integrated knob provides tool-less telescoping adjustment from 4 ft (120 cm) to 6 ft (180 cm).




1

2

3

4

5

Dimensions* 37.13” x 77.75” x 32.13” (WxHxD) (94.3 x 197.4 x 81.6 cm)

Height 4 - 6’ (120 - 180 cm)

Tilt +/-15˚





MAC720 n Dual Display Accessory

PAC700 n Travel Case

3

5

MFM Confidence Monitor Cart Height: 3 - 4’ (91 - 122 cm), Tilt: +15˚/+45˚

MFQ Confidence Monitor Cart Height: 2 - 2.5’ (61 - 76 cm), Tilt: +15˚/+45˚

About MFC™ Disassembles with one tool. Designed with lightweight aluminum its unique angled base makes corner positioning or nesting easy. Universal interface bracket sold with MFCU, custom interface brackets sold seperatly with MFC. other ProduCt oPtions

CArts & stAnds


77.75”(1976 mm)

72”(1829 mm)

2.5”(65 mm)

43.88”(1115 mm)

24.63”(626 mm)

(PFC shown, PAC710 Accessory Shelf not included)

2

1

4


CAll800.582.6480

FAX877.894.6918

SPECIFICATIONS

FEATURES

TECHNICAL DRAWINGS



64

PF1™ 42 - 71” Floor StaND






1

2

3

4

5

Dimensions* 36” x 94” x 30” (WxHxD) (91.4 x 238.8 x 76.2 cm)

Height 4 - 7’ (120 - 210 cm)

Tilt +/-15˚





PAC720 n Dual Display Accessory

PAC150 n Video Conferencing Camera Shelf

PF2 Dual Floor Stand

About PF1™ Disassembles with one tool. Designed with lightweight aluminum its unique flat angled base makes corner positioning easy. Universal interface bracket sold with PF1U, custom interface brackets sold seperatly with PF1. other ProduCt oPtions

60”(1525 mm)

51.38”(1304 mm)

17”(432 mm)

35”(889 mm)

26”(661 mm)

CArts & stAnds

3

5


(PAC710 Accessory Shelf not included)

2

1

4


CAll800.582.6480

FAX877.894.6918

SPECIFICATIONS

TECHNICAL DRAWINGS



FEATURES

65

MF1™ 30 - 55”Floor StaND






1

2

3

4

5

Dimensions* 36” x 91.6” x 30” (WxHxD) (91.4 x 232.7 x 76.2 cm)

Height 4 - 7’ (120 - 210 cm)

Tilt +/-15˚





MAC720 n Dual Display Accessory


MF2 Dual Floor Stand

About MF1™ Disassembles with one tool. Designed with lightweight aluminum its unique flat angled base makes corner positioning easy. Universal interface bracket sold with MF1U, custom interface brackets sold seperatly with MF1. other ProduCt oPtions

47.63”(1211 mm)

2.5”(65 mm)

86.38”(2194 mm)

91.63”(2327 mm)

15º

15º

CArts & stAnds

3

5


(PF1 shown, PAC710 Accessory Shelf not included)

2

1

4


CAll800.582.6480

FAX877.894.6918

SPECIFICATIONS

FEATURES

TECHNICAL DRAWINGS



66

Mss™ 30 - 50” table StaND

telesCoping HeigHt Adjustment integrated knob provides tool-less telescoping adjustment from 19.2" (46.7 cm) to 24.5" (62.2 cm).


bolt-down seCuritY optional free-standing with bolt-down capabil-ity for permanent installations and security.

smootH swivel Smooth swivel up to 45º in either direction. optional stops at 15º, 25º and 35º.

CAble mAnAgement internal routing pathways conceal cables while allowing cables to exit through back of stand or down grommet hole.

1

2

3

4

5

Height 22.41 - 27.66” (569 - 703 mm)

Swivel ±15˚, 25˚, 35˚





PACLr1 n Left/Right Speaker Adapeter

ordering oPtions Available in Custom and Universal.

• MSSV = Universal/VESA 30 - 50"

• MSS-XXXX = Custom (see MountFinder at www.chiefmfg.com)

CArts & stAnds

3.16”(80 mm)

9.29”(236 mm)

Min 19.25”(489 mm)

Max 24.5”(622 mm)

2.53”(64 mm)

14.25”(362 mm)

3.94”(100 mm)

5.07”(129 mm)

5

3

4

1

2


CAll800.582.6480

FAX877.894.6918

SPECIFICATIONS

TECHNICAL DRAWINGS



FEATURES

67

Mts™ 30 - 50”Security table StaND

telesCoping HeigHt Adjustment Height -adjusts up to 3.5" (99 mm).

bolt-down seCuritY Designed for a safe, secure installation. tamper-resistant hardware included.

smootH swivel Prevent tV from hitting walls or furniture by setting rotation limiters at 0º, 10º, 20º, 30º or 270º.

keYed seCuritY three (a/b/c) key locking options for advanced security.

CAble mAnAgement internal routing pathways conceal cables while allowing cables to exit through back of stand or down grommet hole.

1

2

3

4

Height 19.5 - 23” (495 - 584 mm)

Swivel 0˚, 10˚, 20˚, 30˚, 270˚




hC1 n Heavy-Duty Cable System

LC1 n Cable Lock

CArts & stAnds


• MTS(A/B/C)V = VESA 100 x 100 mm, 200 x 100 mm, 200 x 200 mm and 400 x 200 mm patterns

instALLAtion reCoMMendAtion Ideal for hospitality environments!

4

1

23

3.75”(95 mm)

17.88”(454 mm)

15.75”(400 mm)

6.88”(175 mm)

7.87”(200 mm)

23.2”(587 mm)

19.66”(499 mm)

6.88”(175 mm)


CAll800.582.6480

FAX877.894.6918

SPECIFICATIONS

FEATURES

TECHNICAL DRAWINGS



68

MPo™ 15 - 40” Pull-out table StaND

telesCoping HeigHt Adjustment Height -adjusts up to 4" (101.6 mm).

smootH extension extends 5.5” (140 mm) to achieve ideal viewing angle.

bolt-down instAllAtion Designed for stability, the MPo bolts down to install.

smootH swivel Smooth swivel up to 15º in either direction.

1

2

3

Extension 5.5" (140 mm)

Height 16.36- 21.63” (422 - 549 mm)

Swivel +/-15˚


Color Black

instALLAtion reCoMMendAtion Integrate the MPO with 15" - 40" flat panel TVs into cabinetry or recessed installations to achieve smooth extension and swivel movement.


hC1 n Heavy-Duty Cable System

LC1 n Cable Lock

CArts & stAnds

1

3

2

Min 16.36" (422 mm) Max 21.63" (549 mm)

(1" increments)

3" (76 mm)

7.88" (200 mm)

3.94" (100 mm)

4.63" (118 mm)

13.14" (334 mm)

13.94" (354 mm)

10" (254 mm)


CAll800.582.6480

FAX877.894.6918

SPECIFICATIONS

TECHNICAL DRAWINGS



FEATURES

69

truss & PoLe MountstPs™ 30 - 61”FixeD MouNt

low proFile Sits snugly against truss or poles for an integrated look.


Q-lAtCH™ mounting sYstem Flat panel secures to mount with a latching flag. easy to connect/disconnect – no tools needed! Protect display by adding a padlock.

1

2

3


Color Black

tPK1/tPK2 n Pole Kits (TPK 2 shown)

tPK3/tPK4/tPK5 n Truss Kits (TPK5 shown)


• TPSU = Universal 30 - 61" (The Universal Interface Bracket [PSBU™] will automatically be included.

• TPS-XXXX = Custom (see MountFinder at www.chiefmfg.com)

instALLAtion reCoMMendAtion Ideal for tradeshow environments!

17.06" (433 mm)

1.95" (49.5 mm)

1.08" (27.4 mm)

8.11" (206 mm)

8.95" (227.3 mm)


1

3

2


CAll800.582.6480

FAX877.894.6918

SPECIFICATIONS

FEATURES

TECHNICAL DRAWINGS



70

tPM™ 30 - 61” tiltiNG Pole MouNttruss & PoLe Mounts


Q-lAtCH™ mounting sYstem Flat panel secures to mount with a latching flag. easy to connect/disconnect – no tools needed!


1

2

3


Colors Black

tPK1/tPK2 n Pole Kits (TPK 2 shown)

tPK3/tPK4/tPK5 n Truss Kits (TPK5 shown)


• TPMU = Universal 30 - 61" (The Universal Interface Bracket [PSBU™] will automatically be included.

• TPM-XXXX = Custom (see MountFinder at www.chiefmfg.com)


tPP Flat Panel Tilt Truss Mount

3.4" (86 mm)

tilts5º up

15º Down

1.95" (50 mm)

8.11" (206 mm)

8.95" (227 mm)


3

2

1


CAll800.582.6480

FAX877.894.6918

SPECIFICATIONS

TECHNICAL DRAWINGS



FEATURES

71

truss & PoLe MountsJPP™ 26 - 45”PiVot/tilt Pole MouNt

Centris™ Fingertip tilt PateNteD Feature Provides smooth fingertip tilt in all directions using the screen’s center of gravity. Screen angle stays set until you decide to re-adjust.


smootH swivel Smooth swivel up to 15º in any direction.

FAst HeigHt Adjustment Height-adjust mount on pole for ergonomic alignment.

1

2

3

4




• JPPU = VESA patterns up to 400 x 400 mm

AttAChes to 1.5"-2.0" diAMeter PoLes

CustoM interFACes ordered sePArAteLy

1

3

2

3.68" (94 mm)center of Pipe

5.03" (128 mm)

7.46" (189 mm)

6" (152 mm)

4.43" (112 mm)

COMMERCIAL APPLICATION


CAll800.582.6480

FAX877.894.6918

SPECIFICATIONS

FEATURES

TECHNICAL DRAWINGS



72

dFK™ 32 - 50” DeSiGNer FraMeSdeCorAtive FrAMes

inFrAred kit all frames include an easy-to-install infrared kit, allowing you to continue using your current tV remote.

optiCAl mirror kit option add the optical Mirror Kit to your order, and transform flat panel tVs into stunning framed mirrors.

eAsY Alignment Frame is equipt with a spacer guide on the back making perfect alignment easy.

1

2

32", 42" & 50" Models Available

Model 32" 42" 50"

Height 27.25" 32” 36” (692.2 mm) (812.8 mm) (914.4 mm)

Width 39.5” 48.25” 55” (100.3 cm) (122.6 cm) (139.7 cm)

Depth 4.25” 4.25” 4.25” (108 mm) (108 mm) (108 mm)

Choose FroM 3 sizes Dimensions Varies per model (HxWxD)

Colors Black, Silver, Gold and Dark Pecan

* Display depth plus custom PSB interface cannot exceed listed depth.


Msr n 26 - 50"Fixed Wall Mount

dFM n Optical Mirror Kit

HOME THEATER APPLICATION

2

1


CAll800.582.6480

FAX877.894.6918

FLAt PAneL

73

pAClr1™ left/Right Speaker Adapter

Fully assembled n

Low profile n

Expandable for 30 - 50" flat panels n

Compatible with 8"(203 mm) and n

14"(356 mm) Q-Latch patterns

pAC302™ Center Speaker Shelf Interfaces with Chief's n

Q-Latch Mounting System

Includes 5"(127 mm) of height n

adjustment for different size speakers

Compatible with 30 - 50" flat panels n

pACY3™ Yamaha CenterCompatible with YAMAHA YSP-800,YSP-1000/YSP-1, YSP-900, n

YSP-3000, YSP-30D, YSP-3050, HTY7030, YSP-4000, YSP-40D, HTY-7040

Compatible with 14"(356 mm) Q-Latch patterns n

Height adjustable for a flush installation n

Ysm2™ Yamaha Wall MountCompatible with YAMAHA n

YSP-1100, YSP-800, YSP-1000, YSP-1

Low profile wall mount installation n

Provides room for outlet placement n

Fusion Center Channel Speaker Adapter

Compatible with new fusion fixed and tilt wall mounts n

Expandable to fit flat panels up to 65" n

Universal design accommodates most speaker brands n

Low profile design does not add depth to installation n

Fusion left/Right Channel Speaker Adapter

Compatible with new fusion fixed n

and tilt wall mounts

Expandable to fit most flat panels n

Universal design accommodates n

most speaker brands

Low profile design does not add n

depth to installation

pACCC1™ Center Channel Speaker Adapter

Fully assembled n

Low profile n

Expandable for 30 - 50" Flat Panels n

Compatible with 8"(203 mm) and n

14" (356 mm) Q-Latch patterns

mAC251™ CPU/DVD/VCR Universal Adapter

Adapts to 8" (203 mm) n

Q-Latch pattern

Allows easy access to drives n

and input/output connections

Compatible with media n

devices up to: (WxD) 13.75 x 3.88" (349 x 99 mm)

pAC251™ CPU/DVD/VCR Universal Adapter

Adapts to 14"(356 mm) n

Q-Latch pattern



Compatible with media devices n

up to: (WxHXD) 15.5 x 17.63 x 3.5" (394 x 448 x 89 mm)

pAC252™ CPU Universal AdapterAdapts to 14"(356 mm) n

Q-Latch pattern



Compatible with media devices n

up to: (WxHXD) 14.5 x 16 x 4.5" (368 x 406 x 114 mm)

SPEAKER ADAPTERS

MEDIA ADAPTERS

ACCessories


CAll800.582.6480

FAX877.894.6918

FLAt PAneL

74

pAC521p™ Power-infused Pre-install Box

Replaces the need for an outlet n

Provides AC cleaning with- n

out loss of power

Power conditioner is invisible and n

recessed into the in-wall box

Provides an organized, recessed n

space for excess cables

pAC125™ lateral shiftAll hardware included n

Provides additional lateral shift n

for fixed and tilt wall mounts

Includes qty. two 28" n

(711 mm) extrusions

pAC126™ lateral ShiftProvides additional n

lateral shift for fixed and tilt wall mounts and spans three studs

All hardware included n

Includes qty. two 36" n

(914 mm) extrusions

ens™ lateral Shift Extrusion for Video Walls

Custom length lateral shift n

extrusion up to 108" (274 cm)

Great solution for horizontally n

tiled flat panel installations

All hardware included n

pAC501™ large in-Wall Swing Arm Box

Designed to integrate an in-wall n

swing arm for a flush installation

Compatible with n

PNRIW, PWRIW, MWRIW

pAC510™ Flat Panel Pre-Wire in-Wall Box

Retro-fit installation design n

Installs between 16" centers n

Capacity for up to four single gang n

junction boxes and conduit, surge protectors and excess cable


New Contruction or retro- n

fit installation design

Installs between 16" centers n


junction boxes and conduit, surge protectors and excess cable


New Construction or Retro- n

fit installation design

Installs horizontally between 16" n

centers or vertically on a single stud


junction boxes and conduit, surge protectors and excess cables

PRE-INSTALLATION POWER BOXES

LATERAL SHIFT ADAPTERS

IN-WALL ACCESSORIES

ACCessories

mwC™ Medium Tilt Mount with Media Player Storage

Complete solution designed n

to easily integrate a media player into a flat panel installation

Lockable tilt at 0 , 5, 10, 15 n

8"(203 mm) Q-Latch installation n



pwC™ large Tilt Mount with Media Player Storage

Complete solution designed n

to easily integrate a media player into a flat panel installation

Lockable tilt at 0º , 5º, 10º, 15º n

14"(356 mm) Q-Latch installation n




CAll800.582.6480

FAX877.894.6918

FLAt PAneL

75

pAC115™/pAC116™/pAC117™

Fixed & Tilt Wall Mount Steel Stud/Drywall Anchor kit

Kit includes (4, 6, or 25) heavy n

duty toggle anchors; quantity coincides with part number

Drywall must be a minimum n

of .5" (12.7 mm)

Max Load: 175 lbs (79.3 kg) n

pAC390™ Cube System AdapterCompatible with large fixed and n

tilt wall mounts 14" (356 mm) Q-Latch pattern

Quickly adapts office wall system n

with adjustable depth up to 3.81" (97 mm)

Holds up to 175 lbs (79.3 kg) n

pAC400™/mAC400™ 90º Rotation Adapter

Provides fingertip flat panel rotation n

from landscape to portrait mode

PAC400 is compatible with Chief n

14" (356 mm) Q-Latch pattern

MAC400 is compatible with Chief n

8" (203 mm) Q-Latch pattern

Low profile: Only n

1.06" (26.9 mm) added depth

pAC124™ 24" Stud AdapterDesigned to adapt to MWH/MWR/ n

PWR/PNR/PDR swing arms to allow for 24" (609 mm) center stud installation

Kit is includes 26" (660) wall n

extrusions and aesthetic covers

Fusion CAT 5/ Surge Adapter (shown with PACPC1™)

Compatible with Fusion n

fixed and tilt wall mounts

mAC118™ Medium Swing Arm Steel Stud Adapter

Retro-fit installation design n

Installs on 16"/20"/24" centers n


junction boxes and conduit, surge protectors and excess cables

Provides room for outlet placement n

mAC119™ large Swing Arm Steel Stud Adapter

Compatible with MWR n

and PWR products

Attaches directly to n

16"/20"/24" center steel studs

Includes all mounting hardware n

Low profile only adds .1345” n

(3.42 mm) to installation depth

STEEL STUD ADAPTERS

SPECIALTY ADAPTERS

ACCessories

pACHFk1™ Header/Footer kit for PAC501

Easily installs between three 16" n

center studs with center stud removed

Reduces PAC501 installation time n

Provides a solid support structure, n

elimating the need to frame around the PAC501 with 2x4 studs

Provides clearance holes for the n

knockouts to simplify electrical wiring

mAC501™ Medium in-Wall Swing Arm Box (shown with JWDIW™)



Installs between 16" n

center stud system

Compatible with JWDIW n

FAC501™ Small in-Wall Swing Arm Box (shown with FWDIW™)



Installs between 16" n

center stud system

Compatible with FWDIW n


CAll800.582.6480

FAX877.894.6918

FLAt PAneL

76

pAC101™ Shelf for Single Stud Wall installations

Dimensions (HxWxD): 2.18” x 14” n

x 10.4” (5.53 x 35.56 x 26.41 cm)


All mounting hardware included n

pAC150™ Video Conferencing Camera Shelf

Compatible with 8" (203 mm) and n

14"(356 mm) Q-Latch pattern mounts


Shelf dimensions: (WxD) n

12 x 7" (305 x 178 mm)

Height Adjustable: 5 1/4" n

Maximum weight on shelf: n

10 lbs (4.5 Kg)

pAC710™ Carts and Stands Accessory Shelf

Supports Chief’s line of flat panel n

floor stands and carts (PFC, MFC, PF1, MF1, PF2 and MF2 products)

Quick installation and adjustments n


pAC100™ smoked Acrylic Accessory shelfCompatible with PPC Presenter's cart n

Dimensions: (WxD) 29 n ½ x 18" (749.3 x 457.2 mm)

Weight Capacity: 35 lbs. (15.88 kg) n

pAC102™ Shelf for Pole installations

Dimensions (HxWxD): 2.18” x 14” n

x 10.4” (5.53 x 35.56 x 26.41 cm)


All mounting hardware n

included for 1.5" NPT installation

Fusion Component Shelf(model number varies with mount type and screen size)

Height adjustable to accommodate n

different flat panels

Attaches directly onto Fusion wall n

mounts for easy centering

Glass shelf included for aesthetic look n

Fusion Video Conferencing Shelf(model number varies with mount type and screen size)

Height adjustable to accommodate n

different flat panels

Attaches directly onto Fusion wall n

mounts for easy centering

Slotted shelf allows for secure n

camera attachment

pAC103™ Equipment Safety Strap

Compatible with PAC101 n

and PAC102 Shelf

Adjustable strap provides n

added security for components

ACCESSORY SHELVES

ACCessories

px2w™ Power Outlet ConditionerReplaces the need for an outlet n

Provides AC cleaning without n

loss of power

pAC521p™ Power-infused Pre-install Box

Replaces the need for an outlet n

Provides AC cleaning with- n

out loss of power

Power conditioner is invisible and n

recessed into the in-wall box

Provides an organized, recessed n

space for excess cables

pACpC1™ Power Filter kitComplete kit for easy integration n

with: Wall Mounts, 1.5" NPT Extension Columns, Pre-Installation Boxes and In-Wall Swing Arm Boxes

Noise filtering for a crystal n

clear signal

Surge protection (1890 Joule Rating) n

Automatic shutoff for n

over voltage protection

Includes two outlets and a n

24" (609 mm) power cord

POWER ADAPTERS

77


CAll800.582.6480

FAX877.894.6918

AU

TO

MA

TE

D M

OU

nT

s

automated mounts

au

tom

ate

d m

ou

nts


CAll800.582.6480

FAX877.894.6918

automated mounts

78

table of contents

sl151™ SMArt-lift (extendS up to 8.25”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

sl236™ SMArt-lift (extendS up to 36”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

cm1W18™ 37 - 61” Swing ArM Mount. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

cm2l40™ 32 - 61” pop-up lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

cm2c40™ 32 - 61” ceiling lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

cm3t45™ 32 - 50” Swivel tAble StAnd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

cm4s57™ 37 - 63” SpeAker AdApter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

cm5V42™ 32 - 42” Art lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

cm6dV™ cAbinet AcceSSorY (duAl verticAl pAnel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

cm6QH™ cAbinet AcceSSorY (QuAd HoriZontAl pAnel) . . . . . . . . . . . . . . . . . . . . . . . . 89

cm7W12u™ 37 - 63” Swing ArM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

cm8t15u™ 40 - 61” tilting Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

automated mount accessoRIes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92


CAll800.582.6480

FAX877.894.6918

automated mounts

79

HOW TO ORDER

ORDERInG TIPs

FAX 877.894.6918 (domestic)952.894.6918 (international)

E-MAil [email protected]

optionS StepS

ordering optionS tipS

tIps & tools

chief’s automated mounting solutions involve a varied set of ordering options.

for ordering details specific to an individual automated solution, visit the product page at www.chiefmfg.com and click on the ordering info tab.

customto save installation time and hassle, choose a custom interface for your automated mounting solution when the flat panel model is known. if the exact flat panel has not been determined, the automated mount may be ordered and installed, allowing the project to continue as scheduled. when the tv model is determined, the needed custom interface may be delivered to complete the project.

unIVeRsalchief’s universal mounting solutions are compatible with 95% of screen models. universal mounts allow for reduced inventory and flexibility for unknown or changing flat panel models. See Mountfinder™ pro at www.chiefmfg.com to ensure flat panel compatibility with your universal mount.

consIdeR YouR automatIon optIons Whether a swing arm or lift requiring a custom enclosure, Chief offers a full line of options to provide your customers full automation at the touch of a button!

ReVIeW cad dRaWInGs To ensure compatibility with your project, access complete CAD drawings of Chief’s automated mounting solutions at www.chiefmfg.com. For a listing of all technical drawings via the product page, click on the Downloads tab.

confIRm tHIRd paRtY contRol connectIons To ensure successful automation compatibility, be sure that the control type of your Chief mount matches the specifications of the control software being used.

don’t be IntImIdated bY automatIon Haven’t tried out show control options? Let Chief’s expert Customer service team assist with all of your technical questions to take your professional or residential installations to the next level!

patented tecHnoloGY Look for Chief’s exclusive patented features, including Q-Latch™ Technology, designed for faster installation and an enhanced end-user experience.

step 1 To determine a mounting solution for your application, visit www.chiefmfg.com to access Chief’s MountBuilder™ and MountFinder Pro™. Or contact our experienced Customer service team for in-depth, personalized service.

step 2 Choose from custom or universal mount options, along with the appropriate accessories needed for your installation.

step 3 Fax or e-mail in your order.

call customer service 1.800.582.6480 (domestic) 952.894.6280 (international)

Visit our Website www.chiefmfg.com


CAll800.582.6480

FAX877.894.6918

automated mounts

sPECIFICATIOns

FEATUREs

TECHnICAL DRAWInGs

WHAT YOU nEED TO KnOW

RECOMMEnDED ACCEssORIEs

80

sl151™ SMArt-lift

PrECisE Positioning vertical projector cradle adjustment and fore/aft projector positioning.

QuiCk ConnECt/DisConnECt convenient lamp and filter access on most projectors. Maintains registration even when disconnected.

low ProFilE requires only 11” (279 mm) of clearance above ceiling. provides 8.25” (210 mm) of downward travel.

MultiPlE instAllAtion oPtions Mounting options include: three 0.38” (10 mm) threaded rods, 1-1/2” npt threaded extension column with SMA602 accessory, and side mounting with built-in joist tabs.

1

2

3

4

easY InstallatIon Fits into 2 x 2’ suspended ceiling with no modification necessary.

multIple contRol optIons Choose from single momentary push button, low voltage controller, and internal and external wiring options. Also accepts 5–30V AC/DC for triggering commands. AMX/Crestron control compatibility.

VoltaGe optIons 120V or 230V (for 230V order the sL151I), current draw of .9 amps

flexIble InstallatIon Independent roll, pitch and yaw

WIRe moRe tHan one deVIce


Max Projector 8.38 x 18 x 18.25” size (HxWxD) (213 x 457 x 464 mm)

Ceiling Opening 11.25 x 23 x 22.75” (HxWxD) (286 x 584 x 578 mm)

Ceiling Closure 20.25 x 20.25” (WxD) (514 x 514 mm)

Roll/Pitch/Yaw +/-2º, +/-20º, +/-5º


Color White

slb n Projector Interface Bracket (required)

IR10 n Infrared Remote Control

2

4

1

For a complete list of automated mount accessories see page 92.

3

22.81” (579 mm)22.5”

(571 mm)

22.94” (583 mm)

11.2” (284 mm)

20.28” (515 mm)

20.24” (514 mm)

8.5” (216 mm)

(Shown with SMA602. SMA602 not included)


CAll800.582.6480

FAX877.894.6918

automated mounts

sPECIFICATIOns

TECHnICAL DRAWInGs



FEATUREs

81

sl236™ SMArt-lift

EXtEnDED trAvEl requries only 11” (279 mm) of clearance above ceiling for 36” (91.4 mm) of downward travel with three stopping positions.

PrECisE Positioning vertical projector cradle adjustment and fore/aft, left/right projector positioning.

QuiCk ConnECt/DisConnECt convenient lamp and filter access on most projectors. Maintains registration even when disconnected.

MultiPlE instAllAtion oPtions Mounting options include: three 0.38” (10 mm) threaded rods with SMA651 accessory, 1-1/2” npt threaded extension column with SMA601 accessory, side mounting with built-in joist tabs, and by suspending with cables using the SMA651 accessory.

1

2

3

4

multIple contRol optIons Choose from single momentary push button, low voltage controller, and internal and external wiring options. Also accepts 5–30V AC/DC for triggering commands. AMX/Crestron control compatibility.

VoltaGe optIons 120V or 230V (for 230V order the sL236I), current draw of .75 amps

flexIble InstallatIon Independent roll, pitch and yaw

sHIps fullY assembled

slb n Projector Interface Bracket (required)

IR10 n Infrared Remote Control

2

4

3

Extension 36” (914 mm)

Max Projector 9.25 x 20.5 x 22.75” size (HxWxD) (279 x 635 x 698 mm)

Ceiling Opening 25.5 x 28” (641 x 710 mm)

Ceiling Closure 24 x 24” (610 x 610 mm)

Roll/Pitch/Yaw +/-2º, +/-15º, +/-10º


Color White

25.12” (638 mm)

current: 9.26” (235 mm)Max: 9.91” (252 mm)Min: 7.78” (198 mm)

23.88” (607 mm)

36” (914 mm)

11.12” (282 mm)

12.25” (311 mm)

23.88” (607 mm)

28.31” (719 mm)


1


CAll800.582.6480

FAX877.894.6918

automated mounts

sPECIFICATIOns

FEATUREs

TECHnICAL DRAWInGs



82

cm1W18™ 37 - 61” Swing ArM Mount

ultiMAtE FlEXibility extends up to 18” (457 mm) and swivels up to 50˚ (1270 mm) for maximum range of motion.

MultiPlE Control oPtions control options include: serial communication, three programmable viewing options, and ir remote (included).

Q-lAtCh™ Mounting systEM flat panel secures to mount with a latching flag. easy to connect/disconnect – no tools needed!

CAblE MAnAgEMEnt integrated cable management clips and aes-thetic wrap included.

low ProFilE collapses to 4.25” (108 mm), concealing mount behind the screen.

1

2

3

5

4

multIple contRol optIons AMX/Crestron control compatibility

VoltaGe optIons 120V or 230V

Remote Included

Extension 4.25-18” (108-457 mm)


swivel* up to ±50˚

Color Black

paclR1 n side speaker Adapter

paccc1 n Center Channel speaker Adapter

2 4

5

3

18.58” (472 mm)

12.83” (326 mm)

19.09” (485 mm)

19.51” (496 mm)

2.5” (64 mm)

*Swivel range varies depending on screen size.

Max: 21.01” (534 mm)Min: 5.87” (149 mm)

For a complete list of sutomated mount accessories see page 92.

1


CAll800.582.6480

FAX877.894.6918

automated mounts

sPECIFICATIOns

TECHnICAL DRAWInGs



FEATUREs

83

cm2l40™ 32 - 61” pop-up lift

AutoDrivE™ systEM ultra fast and quiet travel at over 2” (51 mm) per second with preset viewing position.

tElEsCoPing DEsign collapses to a stored height of 31” (790 mm) with approximately 40” (101.6 cm) of travel.

MultiPlE Control oPtions control options include: serial communication, dry contact control, and ir remote (included).


CAblE MAnAgEMEnt unique cable management system allows cables to move freely with the lift.

1

2

3

4

5


VoltaGe optIons 120V or 230V (for 230V order the CM2L40I)

flexIble InstallatIon no width constraints


2

4

5

1

Extension 31-71” (79-180 cm)


Color Black



2.5” (64 mm)

3.37” (86 mm)

7.66” (195 mm)

23.75” (603 mm)

19.73” (501 mm)

30.62” (778 mm) bottom of shelf range

of adjustment

28.38” (721 mm)

40” (101.6 cm)

travel

16.82” (427 mm)

For a complete list of sutomated mount accessories see page 92.

3


CAll800.582.6480

FAX877.894.6918

automated mounts

sPECIFICATIOns

FEATUREs

TECHnICAL DRAWInGs



84

cm2c40™ 32 - 61” ceiling lift

AutoDrivE™ systEM ultra fast and quiet travel at over 2” (51 mm) per second with preset viewing position.

tElEsCoPing DEsign collapses to a stored height of 31” (790 mm) with approximately 40” (101.6 cm) of travel.

MultiPlE Control oPtions control options include: serial communication, dry contact control, and ir remote (included).


CAblE MAnAgEMEnt unique cable management system allows cables to move freely with the lift.

1

2

3

4

5


VoltaGe optIons 120V or 230V (for 230V order the CM2C40I)



Extension 31-71” (79-180 cm)


Color Black



2

4

5

19” (483 mm)

23.75” (603 mm)

19.25” (489 mm)

28.38” (721 mm) Approx.

40” (102 cm)of travel

7.75” (197 mm)

2.5” (64 mm)

3.26” (83 mm)


3

1


CAll800.582.6480

FAX877.894.6918

automated mounts

sPECIFICATIOns

TECHnICAL DRAWInGs



FEATUREs

85

cm3t45™ 32 - 50” Swivel tAble StAnd

AutoMAtED swivEl up to 45˚ of swivel left/right with optional stops at 25˚ and 35˚ for optimal viewing angles.

hEight ADjustMEnt Allows 5” (127 mm) of adjustment for screen heights up to 32” (813 mm).

MultiPlE Control oPtions control options include: dry contact connections, push button control, and ir remote (included).


CAblE MAnAgEMEnt grommet on back of the unit provides easy cable routing.

1

2

3

4

5



unIVeRsal VoltaGe custom oR unIVeRsal

2

4

5

swivel +/-45º

Height Adjustment 5” (127 mm)


Color Black, silver


14.14” (359 mm)

1.03” (26 mm)

8.11” (206 mm)

1.95” (50 mm) 2.46”

(62 mm)

4.58” (116 mm)

8.84” (225 mm)

7” (178 mm)

Min: 23.41” (595 mm) Max: 28.66” (728 mm)


1

3


CAll800.582.6480

FAX877.894.6918

automated mounts

sPECIFICATIOns

FEATUREs

TECHnICAL DRAWInGs



86

cm4s57™ 37 - 63” SpeAker AdApter

AuDio sEPArAtion up to 4.5’ (137 cm) speaker extension for an amazing home theater effect.

ADvAnCED CAblE MAnAgEMEnt integrated speaker wire and gold-plated binding posts with multiple connection options including screw-on or push-in.

MultiPlE Control oPtions control options include: dry contact connections, and ir remote (included).


1

2



flexIble InstallatIon Can be used as a wall mount attached to 16” center stud system. Includes center channel speaker bracket.

Extension Up to 9’ (274.3 cm)

Weight Capacity 220 lbs (99 kg) total 22 lbs (10 kg) per speaker

Color Black

2

HOME THEATER APPLICATIOn

1

2.62” (67 mm)

4.88” (124 mm) 12.5”

(318 mm)

44.81” (113.8 cm)Minimum retraction

80.81” (205.3 cm)Minimum extension

107.68” (273.5 cm)Minimum extension


CAll800.582.6480

FAX877.894.6918

automated mounts

sPECIFICATIOns

TECHnICAL DRAWInGs



FEATUREs

87

cm5V42™ 32 - 42” Art lift

EAsy Art AttAChMEnt bracket included to quickly hang and secure artwork.

ultrA QuiEt MovEMEnt up to 28.2” (716 mm) of smooth travel.

ir rEPEAtEr for use with existing remote.

MultiPlE instAllAtion oPtions installation options include: side mounting, and center mounting for recessed applications.

MultiPlE Control oPtions control options include: serial communication, and ir remote (included).

1

2

3



flexIble InstallatIon Remains hidden in every position

1

Extension Up to 28.2” (716 mm)

Depth 4.6-7.6” (116-192 mm)

Minimum Art 42 x 38” size 106.7 x 96.5 cm)


Color Black

msR n 26 - 50” Fixed Wall Mount

psm n 26 - 65” Fixed Wall Mount

pst n 42 - 71” Fixed Wall Mount

42” (107 cm)Minimum

painting height

8.21” (209 mm)

6.15” (156 mm)

36” (914 mm)

39.63” (101 cm)

30.96” (786 mm)

5.24” to 7.24” (131 mm to 184 mm)


2

3


CAll800.582.6480

FAX877.894.6918

automated mounts

sPECIFICATIOns

FEATUREs

TECHnICAL DRAWInGs



88

cm6dV™ cAbinet AcceSSorY

EAsy instAllAtion Ships with motor box pre-mounted onto track for quick and easy installation.

AutoMAtED light Control lighting can be dimmed by remote control.

intEgrAtED sAFEty Control Motor stops and reverses doors if travel is obstructed.

loCk-out oPtion key switch can block access to part of the wall unit.

MultiPlE Control oPtions control options include: dry contact connections, 8 position rJ45 modular phone jack, and ir remote (included).

1

2

VoltaGe optIons 115V and 600W max for lighting

oRdeRInG optIons Available in standard and Custom lengths:

• CM6DV79 = Dual Vertical Panel Lift (79” track length)

• CM6DV83 = Dual Vertical Panel Lift (83” track length)

• CM6DV-xx = Custom Dual Vertical Panel Lift (custom track length)

Track Length 83” (210.8 cm)

Max Door Weight 50 lbs (22.7 kg)

Max Door Width 60” (152.4 cm)

Max Door Height 21” (533 mm)

Exposed Area 40.5” (102.9 cm) (height)

1

2

Top view

Front view


Specifications given for CM6DV83.


CAll800.582.6480

FAX877.894.6918

automated mounts

sPECIFICATIOns

TECHnICAL DRAWInGs



FEATUREs

89

cm6QH™ cAbinet AcceSSorY

EAsy instAllAtion Ships with motor box pre-mounted onto track for quick and easy installation.

AutoMAtED light Control lighting can be dimmed by remote control.

intEgrAtED sAFEty Control Motor stops and reverses doors if travel is obstructed.

CustoM CliPs Allow cabinet valence to hang directly on the mechanism.

MultiPlE Control oPtions control options include: dry contact connections, 8 position rJ45 modular phone jack, and ir remote (included).

1

2

3

VoltaGe optIons 115V and 600W max for lighting

oRdeRInG optIons Available in standard and Custom lengths:

• CM6QH92 = Quad Horizontal Panel Mechanism (92” track length)

• CM6QH92 = Custom Quad Horizontal Panel Mechanism (custom track length)

2

31

Track Length 92.5” (235 cm)

Max Door Width 15.5” (394 mm)

Door Cover 61.38” (156 cm) Area (width)

Clear Opening 60.75” (154 cm) (width)

Top view

Front view



CAll800.582.6480

FAX877.894.6918

automated mounts

sPECIFICATIOns

FEATUREs

TECHnICAL DRAWInGs



90

cm7W12u™ 37 - 63” Swing ArM

ultiMAtE FlEXibility extends up to 12” (305 mm), tilts +7˚/-20˚ and swivels up to 28˚ for maximum range of motion.

PrEsEt Positions two preset buttons on remote to program favorite viewing positions.

MultiPlE Control oPtions control options include: rS232 interface, two programmable viewing options, and ir remote (included).

CAblE MAnAgEMEnt Hidden cable management and mechanism protected by decorative cover for finished look.

low ProFilE collapses to 4.6” (305 mm), concealing mount behind the screen.

1

2

3

4

5

Extension 4.6-12” (117-305 mm)

Tilt +7º, -20º

swivel Up to 28º left/right


Color Black

multIple contRol optIons IR Remote or Rs232


flexIble on-Wall InstallatIon

31.06” (789 mm)

26.57” (675 mm)

5.98” (152 mm)

6.34” (161 mm)

4.25” (108 mm)

22.64” (575 mm)

2 3

1 5

4

InsTALLATIOn APPLICATIOn


CAll800.582.6480

FAX877.894.6918

automated mounts

sPECIFICATIOns

TECHnICAL DRAWInGs



FEATUREs

91

cm8t15u™ AutoMAted tilting Mount

Dimensions 23.6” x 29” x 3.6” (HxWxD) (601 x 737 x 91 mm)

Tilt +2˚, -13˚

Mounting Pattern 10.2” - 30.1” Width (259 - 765 mm)

Mounting Pattern up to 19.3” Height (490 mm)



unIVeRsal VoltaGe

AutoMAtED tilt provides +2˚/-13˚ of smooth, motorized tilt when you power on your display. Mount automatically returns to low-profile, flush position when tv is turned off.

low ProFilE only 3.6” (91 mm) from the wall when turned off.

EXClusivE gliDE loCk™ lAtCh tool-less locking feature saves time and effectively secures flat panel to wall mount.

EAsy instAllAtion Mounts directly to 16” on-center studs or concrete for easy on-wall installation.

univErsAl DEsign universal brackets designed for compatibility with most flat panel displays.

1

2

3

4

HOME THEATER APPLICATIOnCOMMERCIAL APPLICATIOn

1

2

3

4


CAll800.582.6480

FAX877.894.6918

automated mounts

92

ir10™ infrared Remote Control Can be used to control the sL150, n

sL236, CM1W18, CM2L40, and CM3T45

rC10™ RF Remote Control Can be used to control the sL150, n

sL236, and CM2L40

AsP401™ individual Control System

Allows up/down intermediate break n

by rocker switch

COnTROL ACCEssORIEs

accessoRIes

InsTALLATIOn ACCEssORIEs

CMA240™ Sl150 Suspended Ceiling Finishing kit Provides a finished look to the T-Channels in a 2 x 2’ n

(600 x 600 mm) suspended ceiling installation

sMA601™ Smart-lift Single Column Mounting Plate Connects sL150 or sL236 to a 1.5” nPT extension column n

Provides 3” (56 mm) fore/aft and left/right adjustments n

sMA620™ Sl236 Suspended Ceiling installation & Track Clip kit

Provides secure connection of T-Channels to the sides of the lift n

(includes 8 clips)

sMA651™ Sl236 Threaded Rod Adapter Connects the sL236 projector lift to a threaded rod and allows the n

lift to be mounted via cables

ss10™ Pressure-Sensitive Safety Strip Use with sT15 Terminals to provide added safety mechanism to n

lift products

st15™ 5” Safety Strip Terminals Use with ss10 Pressure-sensitive safety strip to provide added n

safety mechanism to lift products

uPb1™ Smart-lift Upright Projector interface Bracket Allows projector to hang in upright position while retaining the n

roll and pitch adjustments

InTERFACE ADAPTERs

CM7AC1™ 200 x 200 mm Adapter CM7 Adapter designed to allow for 200 x 200mm compatibility n

Connects directly to existing hardware n

CM7AC2™ Xl AdapterCM7 Adapter designed to allow for TV hole patterns greater than n

the supplied universal interface

Connects directly to existing hardware n

93


CAll800.582.6480

FAX877.894.6918

Mo

nit

or

Mo

un

ts

monitor mounts

mo

nito

r m

ou

nts


CAll800.582.6480

FAX877.894.6918

monitor mounts

94

table of contents

KWD110™ DUAL ARM WALL MoUnt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

KWG110™ HEIGHt-ADJUStABLE DUAL ARM WALL MoUnt . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

KsG110™ HEIGHt-ADJUStABLE DUAL ARM SLAt WALL MoUnt . . . . . . . . . . . . . . . . . . . . . . . 98

KcD110™ DUAL ARM DESK MoUnt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

KcG110™ HEIGHt-ADJUStABLE DUAL ARM DESK MoUnt . . . . . . . . . . . . . . . . . . . . . . . . . . 100

KWG220™ HEIGHt-ADJUStABLE DUAL MonItoR SWInG ARM WALL MoUnt . . . . . . . . . . . 101

KcG220™ HEIGHt-ADJUStABLE DUAL MonItoR SWInG ARM DESK MoUnt . . . . . . . . . . . 102

KcY220™ HEIGHt-ADJUStABLE DUAL MonItoR DUAL SWInG ARM DESK MoUnt . . . . . . . 103

KtP220™ HoRIZontAL DUAL MonItoR tABLE StAnD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

KtG220™ HoRIZontAL DUAL MonItoR GRoMMEt MoUnt . . . . . . . . . . . . . . . . . . . . . . . . 105

Ktc220™ HoRIZontAL DUAL MonItoR DESK CLAMp MoUnt . . . . . . . . . . . . . . . . . . . . . . 106

KWt110™ ALL-In-onE WoRKStAtIon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

KGl220™ DUAL HoRIZontAL LAptop/MonItoR DESK MoUnt . . . . . . . . . . . . . . . . . . . . . 108

KWK110™ HEIGHt-ADJUStABLE KEYBoARD WALL MoUnt . . . . . . . . . . . . . . . . . . . . . . . . . 109

Ksa1020™ CpU WALL/DESK MoUnt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

KPD110™ DUAL ARM poLE MoUnt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

KPG110™ DUAL ARM HEIGHt-ADJUStABLE poLE MoUnt . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

monitor accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113-116


CAll800.582.6480

FAX877.894.6918

monitor mounts

95

HoW to orDEr

orDErinG tiPs


E-MAil orders@chiefmfg .com

optIonS StEpS

oRDERInG optIonS tIpS

tiPs & tools

universalChief’s universal mounting solutions are compatible with 95% of screen models . Universal mounts allow for reduced inventory and provide flexibility for unknown or changing flat panel tV models . See MountFinder™ pro at www .chiefmfg .com to ensure flat panel compatibility with your universal mount of choice . For screens having a VESA 200mm x 100mm, order the FSBVB (black) or FSBVS (silver) separately . See MountFinder pro™ to ensure monitor compatibility with this universal interface .

customChief Monitor products are compatible with screens having a 75 mm x 75 mm or 100 mm x 100 mm VESA mounting pattern . Custom interface brackets are available for non-VESA 75 and 100 compatible screens . See MountFinder pro™ for specific FSBXXXX custom interface .

multi-monitor comPatibilitY to ensure compatibility, see MountFinder Pro™ or individual product pages for screen size and weight parameters for multi-monitor installations.

sPecifY comPlete moDel number Your Chief flat panel model number will end in a “u” if a universal interface is desired (i.e. PLPu), or a four digit code if a custom interface is selected (i.e. PLP2051). it is also necessary to indicate color preference when appropriate – B for black, s for silver, W for white (i.e. KWG110B).

Don’t forGet tHe accessories From security hardware to keyboard trays, Chief offers a full line of Monitor mount accessories that truly simplify and customize installations.

flat Panel comPatibilitY Chief mounts are compatible with virtually every flat panel tV on the market. television manufacturers use 2 different methods when designing the back of their flat panel tVs (VEsA® and random) so they can be mounted.

PatenteD tecHnoloGY Look for Chief’s exclusive patented features, including Centris™ Fingertip tilt and Q-Latch™ technology, that help to ensure a hassle-free installer and end-user experience.

XPresssHiP™ For projects requiring expedited delivery, look for products noted with Chief’s Xpressship™ logo, guaranteeing same or next-day shipping. For a complete list of Xpressship products, visit the Literature Downloads page on www.chiefmfg.com to download a PDF of the Xpressship flyer.

steP 1 to determine a mounting solution for your application, visit www.chiefmfg.com to access Chief’s MountBuillder™ and MountFinder Pro™. or contact our experienced Customer service team for in-depth, personalized service.

steP 2 Choose from custom or universal mount options, along with the appropriate accessories needed for your installation.

steP 3 Fax or e-mail in your order.

call customer service 1 .800 .582 .6480 (domestic) 952 .894 .6280 (international)

visit our Website www .chiefmfg .com


CAll800.582.6480

FAX877.894.6918

sPECiFiCAtions

FEAturEs

tECHniCAL DrAWinGs

WHAt You nEED to KnoW

rECoMMEnDED ACCEssoriEs

96

KWD110™ DUAL ARM

CEntris™ tEChnology pAtEntED FEAtURE provides smooth fingertip tilt in all directions using the screen’s center of gravity . Screen angle stays set until you decide to re-adjust .

CoMpAtiblE with oFFiCE FurniturE Custom oFB office furniture interface brackets available for most office systems . (oFB brackets sold separately)

AdvAnCEd displAy Mounting teardrop hole pattern makes mounting the screen quick and easy .

ultiMAtE FlEXibility Maximum range of motion from low profile to full extension .


1

2

3

4

5



Max. Extension 15.94” (405 mm)

tilt ±15°


Colors Black, silver

For a complete list of monitor mount accessories see page 113.

Ksa1003 n Extension Arm – Maximum of 3 arms – Weight capacity is reduced to 30 lbs

Ksa1004 n Height Adjustable Arm – Weight capacity is reduced to 25 lbs

Ksa1006 n Extreme Pitch Accessory

2

4

5

1

Wall monitor mounts

KWDsK110 single Arm steel stud Mount

KWs110 single Arm Mount

otHer ProDuct oPtions

KWD130 Height-Adjustable Dual Arm Mount

KWP110 Pivot/tilt Mount

2 .2” (56 mm)Retracted 15 .9” (405 mm)

Extended

2 .4”(61 mm)

5 .6”(143 mm)

5 .7”(144 mm)

9 .6”(244 mm)

VESA75 mm & 100 mm

3


CAll800.582.6480

FAX877.894.6918

sPECiFiCAtions

tECHniCAL DrAWinGs



FEAturEs

97

KWG110™ HEIGHt ADJUStABLE DUAL ARM

FingErtip hEight AdjustMEnt Adjust viewing height up to 13 .25” (337 mm) . optimize height adjustment for any display with customizable tension .




1

2

3

4




Height Adjustment 13.25” (337 mm)

tilt ±15°

Weight Capacity 5-25 lbs (2.3 - 11.4 kg)



Ksa1003 n Extension Arm – Maximum of 3 arms – Weight capacity is reduced to 30 lbs


Ksa1021 n Keyboard tray Accessory

2

4

3

1

Wall monitor mounts

KWe110 Extreme Pitch Dual Arm Mount

KWv110 Height-Adjustable single Arm Mount


KWGsK110 Height-Adjustable steel stud Mount

KWb110 Height-Adjustable triple Arm Mount

10 .57” (268 mm)

5 .63” (143 mm)

1 .3” (33 mm)

6 .5” (165 mm)

10” (254 mm)

1 .63” (41 mm)

Lift Arm 13 .25” (337 mm) vertical range

2 .4” (61 mm)

5 .67” (144 mm)

VESA75 mm & 100 mm


CAll800.582.6480

FAX877.894.6918

sPECiFiCAtions

FEAturEs

tECHniCAL DrAWinGs



98

KsG110™ UnIVERSAL HEIGHt ADJUStABLE DUAL ARMslat Wall monitor mount



univErsAl slAt wAll Mount Ships with Chief’s oFBU, universal slat wall interface bracket .



1

2

3

4

5




tilt ±15°




Ksa1003 n Extension Arm – Maximum of 3 arms

Ksa1013 n Laptop Accessory

Ksa1021 n Keyboard tray Accessory

KsY220 universal Height-Adjustable Dual Monitor slat Wall Mount

otHer ProDuct oPtion

3 .71” (94 mm)Retracted

Lift Arm 13 .25”(337 mm) Vertical Range

20 .55” (522 mm)Extended

7 .04”(179 mm)

10 .88”(276 mm)

5 .88”(149 mm)

6 .77”(172 mm)

VESA75 mm & 100 mm

1 2

3

4

5


CAll800.582.6480

FAX877.894.6918

sPECiFiCAtions

tECHniCAL DrAWinGs



FEAturEs

99

KcD110™ DUAL ARMDesK monitor mounts


EAsy 3-stEp instAllAtion Ships fully assembled, clamp option can be installed from top of desk, grommet bolt through hardware included .




1

2

3

4

5


Ksa1004 n Height Adjustable Arm – Weight capacity is reduced to 25 lbs

Ksa1008 n Extended Desk Clamp Bracket – Compatible with 2 .5" - 5" thick surfaces

Ksa1012 n Extended reach Desk Clamp Bracket



tilt ±15°



Grommet size .38 - 3” (10 - 76 mm)

Max. Mounting 3.2” (81 mm) surface thickness

Kcs110 single Arm Desk Mount – Maximum extension 9 .88” (251 mm)

installinG tHe monitor mount the mounting surface thickness must not exceed 3.2” (81 mm).


6 .7” (169 mm)

9 .1” (231 mm)

12 .8” (325 mm)

3 .2” max (81 mm)

0 .5” (13 mm)

VESA 75 mm & 100 mm

5

12

3

4


CAll800.582.6480

FAX877.894.6918

sPECiFiCAtions

FEAturEs

tECHniCAL DrAWinGs



100

DesK monitor mountsKcG110™ HEIGHt ADJUStABLE DUAL ARM



Kcv110 single Arm Height Adjustable Mount

Kce110 Extreme tilt Dual Arm Height Adjustable Mount

Kcb110 triple Arm Height Adjustable Mount

Ksa1008 n Extended Desk Clamp Bracket – Compatible with 2 .5” - 5” thick surfaces



Max. Extension 20” (508 mm)


tilt ±15°


Grommet size .38 - 3” (10 - 76 mm)




8 .81”(224 mm)

13 .75”(349 mm)

3 .2” max(81 mm)

10 .02”(255 mm)

6 .5”(165 mm)

1 .75”(44 mm)

Lift Arm 13 .25” (337 mm) vertical range

1 .63”(41 mm)

5 .08”(129 mm)

VESA 75 mm & 100 mm





1

2

3

4

3

1

2

4


CAll800.582.6480

FAX877.894.6918

sPECiFiCAtions

tECHniCAL DrAWinGs



FEAturEs

101

Dual monitor Wall mountsKWG220™ HEIGHt ADJUStABLE SWInG ARM

KWD220 Dual Arm Wall Mount

KWD320 triple Arm Wall Mount


Ksa1002 n Desk Mount Adapter

Ksa1007 n Centris Quick release interface

Ksa1017 n Pole Clamp Adapter

installinG tHe monitor mount the screens width must not exceed 22.7” (577 mm).





tilt ±15°

Weight Capacity 9.5 lbs (4.3 kg)

Max. screen Width 22.7” (577 mm)


VESA 75 mm & 100 mm

2 .4”(60 mm)

27 .4”(695 mm)

5 .7”(144 mm)

Lift Arm 13” (330 mm) vertical range





1

2

3

4

10 .4”(263 mm)

pivot up to±180˚

±90˚

5 .7”(145 mm)

3

1

2

4


CAll800.582.6480

FAX877.894.6918

sPECiFiCAtions

FEAturEs

tECHniCAL DrAWinGs



102

Dual monitor DesK mountsKcG220™ HEIGHt ADJUStABLE SWInG ARM



KcD220 Dual Monitor swing Arm Desk Mount

KcD320 triple Monitor swing Arm Desk Mount






tilt ±15°

Weight Capacity 9.5 lbs (4.3 kg)

Max. screen Width 22.7” (577 mm)

Grommet size .38 - 3” (10 - 76 mm)






indEpEndEnt AdjustMEnt Adjust each screen independently for ergonomic alignment .


1

2

3

4

4

3

2

1

27 .4” (695 mm)

VESA 75 mm & 100 mm

5 .1”(129 mm) Lift Arm 13”

(330 mm) vertical range

pivot up to±180˚

±90˚

13 .4” (341 mm) 8 .7”

(221 mm)

Max thickness3 .2” (81 mm)


CAll800.582.6480

FAX877.894.6918

sPECiFiCAtions

tECHniCAL DrAWinGs



FEAturEs

103

Dual monitor DesK mountsKcY220™ HEIGHt ADJUStABLE SWInG ARM




tilt ±15°

Weight Capacity 5-20 lbs (2.3 - 9.1 kg) Per Monitor

Grommet size .38 - 3” (10 - 76 mm)


KGl220 Dual Monitor/Laptop Desk Mount









indEpEndEnt hEight AdjustMEnt Dual arm, dual monitor . Maximize possible viewing angles . Adjust the height and position of each screen independently for ergonomic alignment


1

2

3

4

12

4

3

9 .55” (243 mm)

8 .6” (218 mm)

10 .83” (275 mm)

22 .55” (573 mm)

4 .21” (107 mm)

1 .76” (45 mm)

16 .52” (420 mm)

5 .08” (129 mm)

VESA 75 mm & 100 mm


CAll800.582.6480

FAX877.894.6918

sPECiFiCAtions

FEAturEs

tECHniCAL DrAWinGs



104

Dual monitor mountsKtP220™ HoRIZontAL tABLE StAnD



KtP320 triple Horizontal table stand

KtP225 Widescreen Dual table stand

KtP445 Widescreen Quad Monitor table stand

Kta1000 n Grommet Bolt through Accessory

Kta1001 n Array Connector

Pole Height 14” (356 mm)

Max. Width 22.7” (577 mm) Per Monitor

Max. Height 26” (660 mm) Per Monitor

tilt ±15°

Weight Capacity 35 lbs (15.9 kg) Per Monitor*



KtP440 Quad Monitor table stand

KtP230 Dual Vertical table stand


AdvAnCEd displAy Mounting teardrop hole pattern makes mounting the screen quick and easy

stAblE bAsE Heavy-duty, solid steel base and oversized pole for unmatched stability .

indEpEndEnt AdjustMEnt position each screen separately for ergonomic, horizontal alignment .

CAblE MAnAgEMEnt Conceal and protect cables using snap-on covers and cable clips .

1

2

3

4

5

5

1

4

2

3

12 .5” (318 mm)

13 .25” (337 mm)

4 .5” (114 mm)

Ø 1 .9” (48 mm)

18” (457 mm)

23 .84” (606 mm)

2” (51 mm)

VESA 75 mm & 100 mm

* Weight capacity given for KTP220. See www.chiefmfg.com for more information on other product options.


CAll800.582.6480

FAX877.894.6918

sPECiFiCAtions

tECHniCAL DrAWinGs



FEAturEs

105

Dual monitor mountsKtG220™ HoRIZontAL GRoMMEt MoUntS




Kta1028 n 28” Extension Column




tilt ±15°


Grommet size .38 - 3” (10 - 76 mm)


KtG320 triple Horizontal Grommet Mount

KtG330 six Monitor Grommet Mount

KtG225 Widescreen Dual Grommet Mount


KtG440 Quad Monitor Grommet Mount

KtG445 Widescreen Quad Grommet Mount

KtG230 Dual Vertical Grommet Mount




CAblE MAnAgEMEnt Conceal and protect cables using snap-on covers and cable clip

stAblE groMMEt bolt through Heavy-duty, solid steel bolting plates and oversized pole for unmatched stability .

1

2

3

4

4

5

1

2

1 .06” (27 mm)

23 .84” (606 mm)

5 .86” (149 mm)

Ø 1 .9” (48 mm)

14” (356 mm)

4 .5” (114 mm)

Ø 8”(203 mm)

VESA 75 mm & 100 mm

3

* Weight capacity given for KTG220. See www.chiefmfg.com for more information on other product options.

5


CAll800.582.6480

FAX877.894.6918

sPECiFiCAtions

FEAturEs

tECHniCAL DrAWinGs



106

Dual monitor mountsKtc220™ HoRIZontAL DESK CLAMp MoUntS



Ktc320 triple Horizontal Desk Clamp

Ktc225 Widescreen Dual Desk Clamp




tilt ±15°


Desk thickness 0 - 3.25” (0 - 83 mm)



Ktc440 Quad Monitor Desk Clamp

Ktc230 Dual Vertical Desk Clamp




CAblE MAnAgEMEnt Conceal and protect cables using snap-on covers and cable clip .

stAblE ClAMp Heavy-duty, solid steel desk clamp and oversized pole for unmatched stability .

1

2

3

4

* Weight capacity given for KTC220. See www.chiefmfg.com for more information on other product options.


Kta1028 n 28” Extension Column

Ktc330 six Monitor Desk Clamp

Ktc445 Widescreen Quad Monitor Desk Clamp

4

1

2

3

CoMMErCiAL APPLiCAtion

5


CAll800.582.6480

FAX877.894.6918

sPECiFiCAtions

tECHniCAL DrAWinGs



FEAturEs

107


Extrusion Depth .6” (15 mm)

Extrusion Length 36” (914 mm)

tilt (Monitor) ±15°

tilt (Keyboard) 5° and 90˚

Weight Capacity 5-25 lbs (2.3 - 11.4 kg) (Monitor, 10 lbs (4.5 kg) Keyboard, CPu) 40 lbs (18.1 kg)

CPu Depth & 0-7.5” (0 - 191 mm) Height range 9.75-18” (248 - 457 mm)

Colors Black, off-White


indEpEndEnt positioning Monitor Swing Arm, Keyboard Swing Arm, CpU Adapter and Wall Extrusion move independently to preferred position .

MultiplE instAllAtion options Can be installed vertically on drywall, wood or metal studs, or horizontally across multiple wood or metal studs .


1

2

3

about KWt110™ • swing arms can be installed anywhere along extrusion

• includes all required hardware

• installs vertically on one wood or metal stud, and horizontally spanning multiple studs

• ships with both left and right mouse trays fully-assembled and mouse pouch for storage

• Keyboard can flip up for low-profile storage



Ksa1009 n Height-Adjustable Arm security Kit

1

2

3

rECoMMEnDED ConFiGurAtion

KWT110 extended KWT110 collapsed

WorKstation monitor mountsKWt110™ ALL-In-onE WoRKStAtIon


CAll800.582.6480

FAX877.894.6918

sPECiFiCAtions

FEAturEs

tECHniCAL DrAWinGs



108

Depth (closed) 2.19” (56 mm) (Monitor, Laptop) 15” (381 mm)

Max. Extension 20” (508 mm) (Monitor, Laptop) 31.5” (800 mm)


tilt ±15°

Weight Capacity 5-25 lbs (2.3 - 11.4 kg) (Monitor, Laptop) 15 lbs (6.9 kg)

Max. Laptop Width 16.75” (425 mm)







1

2

3

4

1

KGl110 Height Adjustable Laptop Desk Mount

installinG tHe monitor mount the mounting surface thickness must not exceed 3.2” (81 mm), and the grommet hole size must be between .38 - 3” (10 - 76 mm).





4 .16” (106 mm)

5 .08” (129 mm)

10 .85” (276 mm)

8 .92” (227 mm)

23 .7” (602 mm)

14 .36” (365 mm) 8 .48”

(215 mm)

3

2

4

laPtoP monitor mountsKGl220™ DUAL HoRIZontAL DESK MoUnt


CAll800.582.6480

FAX877.894.6918

sPECiFiCAtions

tECHniCAL DrAWinGs



FEAturEs

109

Depth (closed) tBD

Max. Extension tBD

tilt 5° and 90˚




KcK110 Height Adjustable Keyboard Desk Mount



Ksa1020 n CPu Wall/Desk Mount


ErgonoMiCAlly dEsignEd Gel wrist rest and 5° tilt provide both comfort and support


ultiMAtE FlEXibility Maximum range of motion from low profile to full extension with keyboard flip up .


1

2

3

4

5

1

3

4

5

2

about KWt110™ • ships with both left and right mouse trays fully-assembled and mouse pouch for storage

• Keyboard can flip up for low-profile storage



KeYboarD monitor mountsKWK110™ HEIGHt-ADJUStABLE KEYBoARD MoUnt


CAll800.582.6480

FAX877.894.6918

sPECiFiCAtions

FEAturEs

tECHniCAL DrAWinGs



110

Max. CPu Depth 0-7.5” (0 - 191 mm)

Max. CPu Height 9.75-18” (248-457 mm)




Q-lAtCh™ Mounting systEM Flat panel secures to mount with a latching flag . Easy to connect/disconnect – no tools needed!

MultiplE instAllAtions Vertical wall mounting; vertical and horizontal desk mounting with swivel .

AdjustAblE dEsign Adjustable to fit ultra-small form factor CpUs to tower desktop computers .

tool-lEss AdjustMEnt Ergonomic knobs used for CpU adaptability .

1

2

3

KWG110 n Height-Adjustable Dual Arm Wall Mount

KWK110 n Height Adjustable Keyboard Wall Mount

3

2

1

about Ksa1020 • ships with all mounting hardware

• Desk mounting with swivel for easy cable access



cPu monitor mountsKsa1020™ CpU WALL/DESK MoUnt


CAll800.582.6480

FAX877.894.6918

sPECiFiCAtions

tECHniCAL DrAWinGs



FEAturEs

111

Depth from Pole 2.13” (56 mm)


tilt ±15°


Pole outer 1.5-2” (38 - 51 mm) Diameter range






KPs110 single swing Arm Pole Mount


KPP110 Pivot/tilt Pole Mount



FlEXiblE instAllAtion Allows installation on pre-existing poles . Ships fully assembled .



1

2

3

4

5

3 .04”(77 mm)

4 .73”(120 mm)

8 .71”(221 mm)

6 .5”(165 mm)

6 .5”(165 mm)

1 .63”(41 mm)

VESA75 mm & 100 mm

1

2

3

4

5

Pole monitor mountsKPD110™ DUAL ARM


CAll800.582.6480

FAX877.894.6918

sPECiFiCAtions

FEAturEs

tECHniCAL DrAWinGs



112





Depth from Pole 2.13” (56 mm)



tilt ±15°


Pole outer 1.5-2” (38 - 51 mm) Diameter range




FlEXiblE instAllAtion Allows installation on pre-existing poles . Ships fully assembled .



1

2

3

4

5

KPv110 single Arm Height Adjustable Pole Mount


7 .03”(179 mm) pivot

±180˚

pivot±90˚

VESA75 mm & 100 mm

4 .73”(120 mm)

9 .67”(246 mm)

3 .26” (83 mm)Retracted 19 .78” (502 mm)

Extended

1

2

3

5

4

Pole monitor mountsKPG110™ DUAL ARM HEIGHt ADJUStABLE


CAll800.582.6480

FAX877.894.6918

monitor mounts

113

ksA1001™ Wall Mount Adapter Easily switches any K-series desk or ■n

pole mount to a wall mount

Hides all wall hardware■n

ksA1002™ Desk Mount Adapter Easily switches any K-series wall or ■n

pole mount to a desk mount

Easy installation - top down clamp ■n

adjustment with grommet mounting option

ksA1008™ Extended Desk Clamp Bracket

Allows desk mount to adapt to thick ■n

surfaces

Clamp Bracket range: 2.5 - 5.0” ■n

(64 - 127 mm)

ksA1012™ Extended Reach Desk Clamp Bracket

Allows desk mounts to reach further ■n

under the desk surface

Perfect for Bullnose edges of desks■n

ksA1017™ Pole Clamp Adapter Easily switches any K-series wall or ■n

desk mount to a pole mount

Clamps to poles with outer diameter ■n

of 1.9 - 2.0” (48 - 51 mm)

ksA1018™ Steel Stud Wall Adapter

Easily switches any K-series wall, ■n

desk or pole mount to a wall mount for metal studs

ksA1003™ Extension Arm Add an additional arm for more ■n

extension

A maximum of 3 arms can be used ■n

(reduces weight capacity to 25 lbs / 11.3 kg)

oFFiCE FurniturE ADAPtErs

Common installations

panel-to-panel oFB-xxx

corner panel oFB-xxx

accessories

oFb-xxx™ Custom interface Brackets for Office Furniture Systems

Allows any K-series swing arm wall mount to be installed on ■n

office furntiture

Custom Panel-to-Panel, Corner and Wall track interface brackets ■n

available (depending on brand and model of office system)

oFbu™ Universal Slat Wall interface Bracket Allows any K-series swing arm wall mount to be installed on all slat ■n

wall or tool tile systems

ships fully assembled■n

pAC391b™ Universal Medium & large Slat Wall Accessory

Allows rMF1, rMt1, rLF1, and rLt1 ■n

universal fixed and tilt wall mounts tobe installed on all slat wall or tool tile systems

ships fully assembled■n

Must order mount separately■n

ADAPtErs

ADDitionAL ArMs

ksA1022™ Wall Track Extrusion Easily install any swing arm combination vertically on any stud or ■n

drywall, or horizontally spanning multiple studs

All components can be installed anywhere along extrusion■n


CAll800.582.6480

FAX877.894.6918

monitor mounts

114

ksA1005™ Pivot/Swing Security Hardware kit

tamper proof screws for all exposed ■n

hardware

Compatible with all non-height ■n

adjustable swing arm mounts (maximum of 2 arms)

ksA1009™ Height Adjustable Security Hardware kit

tamper proof screws for all exposed ■n

hardware

Compatible with all height ■n

adjustable swing arm mounts (maximum of 2 arms)

ksA1013™ laptop Tray Accessory Holds standard laptops■n

Can be used with any swing ■n

arm product

Weight Capacity: 15 lbs (6.8 kg) ■n

Max. Width Adjustment: 10.75 - 16.75” (273 - 425 mm)

ksA1021™ keyboard Tray Accessory

Compatible with Height Adjustable ■n

Arms only

Maximum keyboard depth: 8” ■n

(203 mm)

ksA1004™ Height Adjustable Extension Arm

Add 13” (330 mm) of height ■n

adjustment and additional extension to any non-height adjustable arms

A maximum of 3 arms can be used ■n

(maximum 1 height-adjustable arm) Weight Capacity: 25 lbs (11.3 kg)

ksA1006™ Extreme Tilt Adapter Add to any swing arm to get ■n

-25/+90° of tilt

Weight Capacity: 25 lbs (11.3 kg)■n

ksA1007™ Centris™ Quick Release interface

Allows quick and easy monitor ■n

release from all Centris mounts

Must order FsB4XXX interface ■n

bracket separately (FsB4100 for VEsA 75/100 monitors)

ksA1014™ Centris™ Pitch Adapter Gravity-centered tilt self-adjusts to ■n

secure monitor weight

Compatible with screens having 75 ■n

and 100 mm mounting patterns

ksA1019™ TurnTite™ Pitch Adapter

Gravity-centered tilt with external ■n

friction adjustment

Compatible with screens having 75 ■n

and 100 mm mounting patterns

ADDitionAL ArMs cont. sECuritY

HEAD AssEMBLiEs

PEriPHErAL ACCEssoriEs

accessories


CAll800.582.6480

FAX877.894.6918

monitor mounts

115

kMA220™ Dual Monitor Swing Arm Accessory

View two screens (up to 22.7” / ■n

577 mm wide) side-by-side on any swing arm product

reduces weight capacity of mount by ■n

7 lbs (3.2 kg)

kMA320™ Triple Monitor Swing Arm Accessory

View three screens (up to 18” / ■n

457 mm wide) side-by-side on any swing arm product

reduces weight capacity of mount by ■n

10 lbs (4.5 kg)

ksA1011™ Y-connector for Multi-Monitor Swing Arms

Add to any swing arm mount for a ■n

dual monitor extension arm system

Must order additional extension arms ■n

separately

ktA1000™ Grommet Connection Adapter

Bolt down grommet plate for ■n

multi-monitor systems or pole mount swing arms under the desk surface

use with other KtA accessories for a ■n

customized solution

ktA1001™ Array Connector Provides a connection between two ■n

array components for multiple monitor installations

use with KtP, KtG or other KtA ■n

products for a customized solution

ktA1002™ Free-Standing Base Free-standing base for ■n

multi-monitor products

use with other KtA accessories for ■n

a customized solution

ktA1003™ Array Dual Pole Clamp Clamp allows you to attach ■n

additional pole to an existing KtP, KtG or KtA accessory



ktA1004™ Desk Clamp Accessory Desk clamp for multi-monitor ■n

systems or pole mount swing arms

Desk thickness 0-3.25” (0-83 mm)■n



ktA10XX™ Extension Columns Provides different height options ■n

for customized multiple monitor solutions

KtA1014 (14” / 356 mm) ■n

KtA1028 (28” / 711 mm) KtA1036 (36” / 914 mm) KtA1042 (42” / 106.7 cm)

MuLtiPLE Monitor ACCEssoriEs

Common installations

3x3 array stand custom multi-monitor configurations

ktA1005™ Turn-Tite™ Array Centris™ Head Accessory Add an additional screen to an existing KtP, KtG or KtA product■n

use with other KtA accessories for a customized solution■n

accessories


CAll800.582.6480

FAX877.894.6918

monitor mounts

116

ktA220™ Dual Monitor Pole Accessory

View two screens (up to 22.7” / ■n

577 mm wide) side-by-side on a pole or other KtA product



ktA225™ Widescreen Dual Monitor Pole Accessory

View two screens (up to 30” / ■n




ktA320™ Triple Monitor Pole Accessory

View three screens (up to 18” / ■n


MuLtiPLE Monitor ACCEssoriEs cont.

accessories

inDeXfull line cataloG 2008-2009

AASp401 Individual Control System 92

CCM1W18 Automated Swing Arm 82CM2C40 Automated pop-Up Lift 84CM2L40 Automated Ceiling Lift 83CM3t45 Automated Swivel table Stand 85CM4S57 Automated Speaker Adapter 86CM5V42 Automated Art Lift 87CM6DV Automated Cabinet Accessory 88CM6QH Automated Cabinet Accessory 89CM7AC1 200 x 200 mm Adapter 92CM7AC2 XL Adapter 92CM7W12U Automated Swing Arm 90CM8t15U Automated tilting Mount 91CMA100 Ceiling plate w/ Adjustable Column 13CMA101 Designer Ceiling plate 13, 92CMA105/110/115 Flat Ceiling plates 13, 15, 60, 61CMA151 Adapter/Reducer 18CMA152 Coupler w/ Cable port 18CMA160 Installation Job Box Coupler 18CMA165 Internal Joist Ceiling Kit 16CMA170 Storage Accessory 17CMA180 Below-tile Storage Accessory 15CMA240 SL150 Suspended Ceiling Finishing Kit 92CMA250 Flush Mount Kit 11, 19CMA251 Adapter/Reducer 18CMA270 Coupler 17CMA273 End Cap 18CMA274 Cable Cover for Columns 17CMA278 Vinyl End Cap 18CMA290 Wire Suspension Locks 19CMA300 pole Clamp 15CMA330 offset Ceiling plate 13CMA340 Stabilization Kit for Columns 17CMA345 Structured Ceiling plate 13CMA347 Vibration Isolating Coupler 17, 18CMA351 Coupler w/ Swivel 18CMA360 I-Beam Clamp 15CMA362 C Clamp 16CMA365 truss Ceiling Adapter 15, 16CMA366 Architectural Spanning Adapter 15, 16CMA372 offset Unistrut Adapter 15, 16CMA385 Internal Joist Mount 16CMA395 Angled Ceiling plate 13, 14CMA440 Above-tile Suspension Kit 14CMA450 Heavy-Duty, Above-tile Suspension Kit 14CMA455 Heavy-Duty Suspended Ceiling tile Replacement Kit 15CMA470 Above-tile Storage Accessory 14, 15CMA471 Above-tile Large Storage Accessory 15CMA502 Electrical outlet Adapter 18CMA504 Electrical outlet Coupler 17, 18CMA640/642 Decorative Ring for Columns 17CMA700 Ceiling plate w/ Adjustable Column 13CMS Fixed Extension Columns 16CMS Adjustable Extension Columns 17CMS115 SpeedConnect Ceiling plate w/ 1-1/2” npt opening 13CMS390/391 Dual Joist Ceiling plates 14CMS440 Above-tile Suspending Ceiling Kit 14CMS440p Suspended Ceiling Kit w/ power Conditioner 14CMS445 Suspended Ceiling tile Replacement Kit 14CMS445p Suspended Ceiling tile Replacement Kit w/ power Conditioner 15CMS Extension columns 58, 59, 60, 61

DDFK Designer Frames 72DFM optical Mirror Kit 72

EEnS Lateral Shift Extrusion for Video Walls 74

FFAC501 Small In-Wall Swing Arm Box 43, 75FHp110 Ceiling Mount 61FHp18110 Ceiling Mount 61FHS Ceiling Mount 61FSR Fixed Wall Mount 50FtR tilt Wall Mount 57Fusion CAt 5/Surge Adapter 75Fusion Center Channel Speaker Adapter 73Fusion Component Shelf 44, 46, 48, 49, 51, 52, 55, 56, 76Fusion Left/Right Speaker Adapter 46, 47, 52, 53, 73Fusion Video Conferencing Shelf 48, 49, 55, 56, 76FWD Dual Swing Arm Wall Mount 36FWDIW In-Wall Swing Arm 43FWp pivot/tilt Wall Mount 36FWS Single Swing Arm Wall Mount 36

HHC1 Heavy-Duty Cable System 19, 67, 68

IIR10 Infrared Remote Control 80, 81, 92

JJHS Ceiling Mount 60Jpp pivot/tilt pole Mount 71JWD Dual Swing Arm Wall Mount 35JWDIW In-Wall Swing Arm 42JWp pivot/tilt Wall Mount 35JWS Single Swing Arm Wall Mount 35

KKCB110 triple Arm Height Adjustable Desk Mount 100KCD110 Dual Arm Desk Mount 99KCD220 Dual Monitor Swing Arm Desk Mount 102KCD320 triple Monitor Swing Arm Desk Mount 102KCE110 Extreme tilt Dual Arm Height Adjustable Desk Mount 100KCG110 Dual Arm Height Adjustable Desk Mount 100KCG220 Dual Monitor Swing Arm Desk Mount 102 KCK110 Height Adjustable Keyboard Desk Mount 109KCS110 Single Arm Desk Mount 99KCV110 Single Arm Height Adjustable Desk Mount 100KCY220 Dual Monitor, Dual Arm Height Adjustable Desk Mount 103KGL110 Height Adjustable Laptop Desk Mount 108KGL220 Height Adjustable, Dual Arm Monitor/Laptop Desk Mount 103, 108KItES003 projector Suspended Ceiling Kit 21KItES003p projector Suspended Ceiling Kit 21KItLS003 projector Suspended Ceiling Kit 21KItLS012018 projector Suspended Ceiling Kit 21KItpA018024 projector Angled Ceiling Kit 21KItpD0XX0XX projector Flat Ceiling Kit 21KItpD003 projector Flat Ceiling Kit 21KItpS003 projector Suspended Ceiling Kit 21KItpS012C projector Suspended Ceiling Kit 21

KItQS012C projector Suspended Ceiling Kit 21KMA220 Dual Monitor Swing Arm Accessory 115KMA320 triple Monitor Swing Arm Accessory 115KpD110 Dual Arm pole Mount 111KpG110 Dual Arm Height Adjustable pole Mount 112Kpp110 pivot/tilt polt Mount 111KpS110 Single Swing Arm pole Mount 111KpV110 Single Arm Height Adjustable pole Mount 112KSA1001 Wall Mount Adapter 113KSA1002 Desk Mount Adapter 101, 113KSA1003 Extension Arm 96, 97, 98, 100, 107, 108, 109, 111, 112, 113KSA1004 Height-Adjustable Extension Arm 96, 99, 114KSA1005 pivot/Swing Security Hardware Kit 114KSA1006 Extreme tilt Adapter 96, 97, 111, 112, 114KSA1007 Centris Quick Release Interface 101, 102, 103, 104, 105, 106, 107, 111, 112, 114KSA1008 Extended Reach Desk Clamp 99, 100, 102, 103, 108, 113KSA1009 Height Adjustable Security Hardware Kit 107, 114KSA1011 Y-Connector for Multi-Monitor Swing Arms 115KSA1012 Extended Reach Desk Clamp Bracket 99, 100, 102, 103, 108, 113KSA1013 Laptop tray Accessory 98, 114KSA1014 Centris pitch Adapter 114KSA1017 pole Clamp Adapter 101, 113KSA1018 Steel Stud Wall Adapter 113KSA1019 turntite pitch Adapter 114KSA1020 CpU Wall/Desk Mount 109, 110KSA1021 Centris pitch Adapter 97, 98, 114KSA1022 Wall track 113KSG110 Dual Arm Height Adjustable Slat Wall Mount 98KSY220 Dual Monitor, Dual Arm Height Adjustable Slat Wall Mount 98KtA10XX Extension Columns 105, 106, 115KtA220 Dual Monitor pole Accessory 116KtA225 Widescreen Dual Monitor pole Accessory 116KtA320 triple Monitor pole Accessory 116KtA1000 Grommet Connection Adapter 104, 115KtA1001 Array Connector 104, 105, 106, 115KtA1002 Free-Standing Base 115KtA1003 Array Dual pole Clamp 115KtA1004 Desk Clamp Accessory 115KtA1005 turntite Array Centris Head Accessory 115KtC220 Dual Monitor Horizontal Desk Clamp Mount 106KtC225 Widescreen Dual Monitor Horizontal Desk Clamp Mount 106KtC230 Dual Monitor Vertical Desk Clamp Mount 106KtC320 triple Monitor Horizontal Desk Clamp Mount 106KtC330 Six Monitor Desk Clamp Mount 106KtC440 Quad Monitor Desk Clamp Mount 106KtC445 Widescreen Quad Monitor Desk Clamp Mount 106KtG220 Dual Monitor Horizontal Grommet Mount 105KtG225 Widescreen Dual Monitor Horizontal Grommet Mount 105KtG230 Dual Monitor Vertical Grommet Mount 105KtG320 triple Monitor Horizontal Grommet Mount 105


CAll800.582.6480

FAX877.894.6918

inDeX

118

full line cataloG 2008-2009Mpo pull-out table Stand 68MpW Swing Arm Wall Mount 34MSA Fixed Wall Mount 49MSM Micro-Adjustable Fixed Wall Mount 48MSRU Fixed Wall Mount 48, 72, 87MSRV Fixed Wall Mount 49MSS Swivel table Stand 66MtA tilt Wall Mount 56MtM Micro-Adjustable tilt Wall Mount 55MtRU tilt Wall Mount 55MtRV tilt Wall Mount 56MtS Security table Stand 67MWC tilt Wall Mount w/ CpU Storage 55, 74MWH Swing Arm Wall Mount 33MWR Swing Arm Wall Mount 33MWRIW In-Wall Swing Arm 41

ooFB Custom Interface Bracket for office Furniture Systems 113oFBU Universal Slat Wall Interface Bracket 113

ppAC100 Smoked Acrylic Accessory Shelf 76pAC101 Shelf for Single Stud Wall Installation 76pAC102 Shelf for pole Installation 76pAC103 Equipment Safety Strap 76pAC115/116/117 Fixed and tilt Wall Mount Steel Stud/Drywall Anchor Kit 75pAC124 24” Stud Adapter 75pAC125/126 Lateral Shift 74pAC150 Video Conferencing Camera Shelf 64, 65, 66, 76pAC251 CpU/DVD/VCR Universal Adapter 58, 73pAC252 CpU Universal Adapter 73pAC302 Center Speaker Shelf 73pAC390 Cube System Adapter 75pAC391B Universal Medium and Large Slat Wall Accessory113pAC400 90˚ Rotation Adapter 75pAC501 Large In-Wall Swing Arm Box 39, 41, 74pAC510/515/520 Flat panel pre-Wire In-Wall Box 45, 74pAC521p power-Infused pre-Install Box 44, 45, 46, 49, 51, 52, 55, 56, 74, 76pAC700 travel Case 62, 63pAC710 Accessory Shelf 62, 63, 64, 65, 76pAC720 Dual Display Accessory 62, 64pACCC1 Center Channel Speaker Adapter 30, 31, 32, 33, 34, 38, 39, 40, 41, 73, 82, 83, 84pACHFK1 Header/Footer Kit for pAC501 39, 40, 41, 75pACLR1 Left/Right Speaker Adapter 30, 31, 32, 33, 34, 38, 40, 66, 73, 82, 83, 84, 85pACpC1 power Filter Kit 39, 41, 42, 43, 76pACY3 Yamaha Center 73pCM Single Ceiling Mount w/ Angled Column 58pCS Single Ceiling Mount 58pDC Dual Ceiling Mount 58pDR Swing Arm Wall Mount 30pF1 Single Floor Stand 64pF2 Dual Floor Stand 64pFC Mobile Cart 62pFM Confidence Monitor Cart 62pFQ Confidence Monitor Cart 62pG1A Large projector Guard 19pG2A Large projector Guard 9, 19pIWRF In-Wall Swing Arm Mount 38pL1 RpA Large projector Lock 19pL2 RpA Small projector Lock 19pL4 Cable Lock 20pLp pull-n-tilt Wall Mount 52pLp16 portrait/Landscape tilt Wall Mount 54pMSC Security Cable Lock 8, 10, 20pnR Swing Arm Wall Mount 31pnRIW In-Wall Swing Arm 39ppH2000 Heavy-Duty pitch-Adjustable Wall Mount 51

KtG330 Six Monitor Grommet Mount 105KtG440 Quad Monitor Grommet Mount 105KtG445 Widescreen Quad Monitor Grommet Mount 105Ktp220 Dual Monitor Horizontal table Stand 104Ktp225 Widescreen Dual Monitor Horizontal table Stand 104Ktp230 Dual Monitor Vertical table Stand 104Ktp320 triple Monitor Horizontal table Stand 104Ktp440 Quad Monitor table Stand 104Ktp445 Widescreen Quad Monitor table Stand 104KWB110 Height Adjustable triple Arm Wall Mount 97KWD110 Dual Arm Wall Mount 96KWD130 Height Adjustable Dual Arm Wall Mount 96KWD220 Dual Monitor, Dual Arm Wall Mount 101KWD320 triple Monitor, Dual Arm Wall Mount 101KWDSK110 Single Arm Steel Stud Wall Mount 96KWE110 Extreme pitch Dual Arm Wall Mount 97KWG110 Height Adjustable Dual Arm Wall Mount 97, 110KWG220 Dual Monitor, Height Adjustable Swing Arm Wall Mount 101KWGSK110 Height Adjustable Steel Stud Wall Mount 97KWK110 Height Adjustable Keyboard Wall Mount 109, 110KWp110 pivot/tilt Wall Mount 96KWS110 Single Arm Wall Mount 96KWt110 All-In-one Workstation 107KWV110 Height Adjustable Single Arm Wall Mount 97

LLC1 Cable System 20, 67, 68LCD2C Dual projector Ceiling Stacker 20LCD2tS Dual projector table Stand Stacker 20LCDA non-Inverted projector Mount 11LCDB Stacker Base 20LCDCp Stacker Ceiling plate 20LCDpA Stacker Arm 20LpK1 VCM Flush Mount Adapter 12, 19LSA Fixed Wall Mount 47LSB100 RpA or RpM projector Lateral Shift Bracket 6, 7, 19LSB101 RpM w/ Q-Lock projector Lateral Shift Bracket 19LSM Micro-Adjustable Fixed Wall Mount 46LtA tilt Wall Mount 53LtApU portrait tilt Wall Mount 54LtM Micro-Adjustable tilt Wall Mount 52

MMAC118 Medium Swing Arm Steel Stud Adapter 75MAC119 Large Swing Arm Steel Stud Adapter 75MAC251 CpU/DVD/VCR Universal Adapter 59, 73MAC400 90˚ Rotation Adapter 75MAC501 Medium In-Wall Swing Arm Box 42, 75MAC720 Dual Display Accessory 63, 65MCD Dual Ceiling Mount 59MCS Single Ceiling Mount 59MF1 Single Floor Stand 65MF2 Dual Floor Stand 65MFC Mobile Cart 63MFM Confidence Monitor Cart 63MFQ Confidence Monitor Cart 63MIWRF In-Wall Swing Arm Mount 40

pRo tilt Wall Mount 53pRo16 portrait/Landscape tilt Wall Mount 54pSH2000 Heavy-Duty Fixed Wall Mount 44pSM Custom Fixed Wall Mount 45, 87pSMH Heavy-Duty Custom Fixed Wall Mount 44pSMt thinstall Wall Mount 45pSt Fixed Wall Mount 46, 87pSt16 portrait/Landscape Fixed Wall Mount 54pWC tilt Wall Mount w/ CpU Storage 52, 74pWR Swing Arm Wall Mount 32pWRIW In-Wall Swing Arm 41pX2W power outlet Conditioner 15, 44, 45, 47, 48, 50, 51, 53, 54, 57, 76

RRC10 RF Remote Control 92RLF Fixed Rail Wall Mount 47RLt tilt Rail Wall Mount 53RMF Fixed Rail Wall Mount 49RMt tilt Rail Wall Mount 56RpA projector Mount 9RpAA1 Security projector Mount 10RpM RpA Elite projector Mount 6RpMA RpA Elite Locking projector Mount 7RpMA1 RpA Elite Security Mount 8

SSA1 Security Anchor 20SEC2 Security Cable Kit for new SLBU 20SL151 Smart-Lift 80SL236 Smart-Lift 81SLB projector Interface Bracket 80, 81SLBU Universal projector Interface Bracket 4SMA601 Smart-Lift Single Column Mounting plate 92SMA620 SL236 Suspended Ceiling Installation & track Clip 92SMA651 SL236 threaded Rod Adapter 92SS10 pressure-Sensitive Safety Strip 92SSC Secure Screw Cover Kit 20St15 5” Safety Strip terminal 92

ttMA100 projector tripod Mount 19tpK1/tpK2 pole Kits 69, 70tpK3/tpK4/tpK5 truss Kits 69, 70tpM tilting pole Mount 70tpp tilt truss Mount 70tpS Fixed truss and pole Mount 69 UUpB1Smart-Lift Upright projector Interface Bracket 92 VVCM Heavy-Duty projector Mount 12 WWMA300 Wall Mount Arm 16 XXSM Micro-Adjustable Fixed Wall Mount 44XtM Micro-Adjustable tilt Wall Mount 51 YYSM2 Yamaha Wall Mount 73

terMS & conditionS


call800.582.6480

FaX877.894.6918

PRICES: Prices are subject to change without notice. Orders are priced at the pricing in effect on the date your purchase order was received. To guarantee pricing for a specific period, customer must obtain a written quotation from Chief Manufacturing. Chief Manufacturing only sells directly to authorized Chief dealers and distributors. Possession of said price book does not constitute an offer to sell.

QUANTITY DISCOUNTS: With the exception of CMA accessories, products with the same 3-letter prefix may be combined to receive quantity-based discounts. For example: three RPA1200 can be mixed with three RPA800 for the 6-11 piece quantity price break. However, three RPA1200 cannot be mixed with three PSM2042. Contact Chief if you have any questions regarding price structure.

TERMS AND CONDITIONS: All accounts are due and payable in U.S. funds according to the terms of the invoice. Payments by credit card (Visa, MasterCard, American Express and Discover) are accepted without an additional processing charge. All credit card orders are pre-authorized at the date of the purchase order; however, except in the case of custom orders, payment is not charged until the order ships. Wire transfer information is also available upon request. Contact Chief for details on your account, including terms of sale and price structure.

ORDERING: Because of the specific nature of our products and our commitment to entering and shipping orders accurately, we prefer that orders be placed in writing via a purchase order and sent to us via fax (877-894-6918) or via e-mail ([email protected]). In urgent situations, we will make every effort to take accurate orders verbally when requested by the customer. Chief cannot guarantee that verbal miscommunication errors will result in the purchaser’s favor.

ORDER CONFIRMATION: Customers will receive an E-mail confirmation of their order within 1-3 hours of receipt of purchase order. If you do not receive a confirmation of your order, please contact us as it is possible we did not receive your original order. Please review the confirmation to ensure Chief has recorded the details of the transaction as you expected and notify Chief of any discrepancies immediately.

CHANGES TO ORDERS: Because expedited orders begin the production and shipping fulfillment process immediately upon receipt and entry of purchase order, it is frequently not possible to change these orders. Other orders will be changed as possible. Contact Customer Service at 800.582.6480 (domestic) / 952.894.6280 (international) and they will work through an alternative solution with you. In all cases, the customer is responsible for incremental charges incurred because of the change.

SPECIAL ORDERS: Some of Chief’s products can be customized to fit your specific applications. Contact Inside Sales for additional information and pricing. Orders for large quantities of products may also be considered a special order. Any special order or custom product not normally carried in inventory cannot be returned. All electrical products and products with quote pricing are treated as special order items.

PRODUCT CHANGES/DISCONTINUED PRODUCTS: Chief is constantly developing new products and making improvements to existing ones; therefore, we reserve the right to revise or change specifications, designs and model numbers and to discontinue models without notice.

PACKAGING: Where possible and practical, Chief will bulk-pack the items on your order. Please keep in mind that the dimensions and weight of some of our products may preclude bulk-packing. We are not responsible for air-freight or other charges due to multiple single package shipments.

DELIVERY: All promises of delivery are made in good faith and every reasonable effort is made to see that delivery schedules are met. However, if Chief is unable to meet a schedule due to factors beyond our control such as, but not limited to, failure of our suppliers to meet their promised dates or weather-related delivery delays, Chief will not be responsible for significant or specific damage. Significant or specific damages may be, but are not limited to, express shipping method charges or installation delay charges. Contact the Chief Inside Sales team for assistance with freight estimates specific to your needs. Delivered prices do not include any type of extraordinary charges such as lift gate requirements, inside delivery charges, residential charges or other non-standard charges.

FREIGHT AND FREIGHT DAMAGE: Because all Chief product ships FOB Savage, MN or point of shipment, all shipping costs and risks of freight damage are the responsibility of the purchaser. It is the customer’s responsibility to immediately open and inspect all packages and, in the event there is any damage or shortages, file a claim with the freight company. Please contact Chief Customer Service at 800.582.6480 (domestic) / 952.894.6280 (international) to get contact information about the specific freight company used and to discuss receiving a replacement product. Keep the damaged product in its original packaging and carton. Unless concealed damage is reported to the Carrier and Chief immediately, there is no recourse. The customer will be charged for any replacement product as the eventual credit will come directly from the carrier via the claim filed.

RETURNS AUTHORIZATION: All merchandise returned to Chief must be returned with prior authorization and a Return Authorization number provided by Customer Service. Chief will provide Return Authorization only for those products purchased directly from Chief. Consumers or dealers purchasing through a third party must request returns through that third party and are subject to that entity’s return policies and charges. Defective or product received incorrectly due to an error on Chief’s part will be credited to your account in full. In situations where the dealer needs to return merchandise due to a change in its project/equipment or due to ordering incorrectly, a restock charge will apply as follows. Merchandise invoiced in the past 0-30 days - 10%; 31-60 days - 15%; 61-90 days - 25%. Reduced fees may be given for an accompanying reorder of equal or greater value. Returns are not allowed for merchandise over 90 days old; electrical lift products; special order products, or discontinued merchandise. Products returned that are damaged or missing parts will not be eligible for credit unless they can easily be made saleable. Additional charges for parts and labor may apply.

LIMITED WARRANTY: With the exception of electric, gas cylinder and one-way bearing mechanisms, Chief warrants its products to be free of defects in material and workmanship for 10 years. All warranties are in effect beginning the date the product was invoiced by Chief. Electrical mechanisms (such as lift products) have a 1-year limited warranty. Gas cylinder and one-way bearing mechanisms have a 5-year limited warranty. All warranties are in effect for the original purchaser only. Chief disclaims liability for any modifications, improper installation and/or installations over the specified weight capacity. Chief also disclaims liability for any modifications made to electrical mechanisms, improper installation, incorrect voltage connection and/or installations over the stated weight capacity. All Electrical Mechanisms are intended for indoor use only and failure to comply will void warranty. Chief’s sole warranty obligation to the owner of its products is to repair or replace (at Chief’s discretion) defective products at no charge to the original purchaser within the warranty period. The purchaser is responsible for returning the product to Chief Manufacturing via prepaid shipping. To the maximum extent permitted by applicable law, Chief disclaims any other warranties, express or implied, including warranties of fitness for a particular purpose and warranties of merchantability. Chief will not be liable for any damages whatsoever arising out of the use or inability to use Chief products, even if Chief has been advised of the possibility of such damages. Chief bears no responsibility for incidental or consequential damages. This includes, but is not limited to, any labor charges for the repair of Chief products performed by someone other than a Chief employee. Because some states and jurisdictions do not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply. Chief will not be responsible for damage to Chief products caused by misuse, abuse, failure to properly package the product for return to Chief or for damage caused by carriers during shipment to or from Chief. Any repairs to Chief products required due to misuse, abuse or shipping damage or repairs of defective Chief product outside the warranty period will be performed at the current rates established by Chief for factory service.


call800.582.6480

FaX877.894.6918

introductionFull line catalog 2008-2009

For 30 years now Chief has been committed to providing industry first products and dedicated customer service. We remain committed to these core values today and as we look to the future. They are the driving force behind this year’s class of new products and service tools. We believe these new offerings will reduce project design and installation time and provide a new range of functionality to end-users. If you need further information you can always check out www.chiefmfg.com or call our Customer Service Team. We sincerely thank you for your business and we look forward to serving your needs for another 30 years.

MESSAGE FROM CHIEF

Scott GillPresident & CEO, Milestone AV Technologies

Chief is a Division of Milestone

Steve DurkeeVP & General Manager, Chief Products

AWARDS

Chief’s CM2C40 Automated Flat Panel Ceiling Lift, and PIWRF/MIWRF In-Wall Swing Arm Mounts were both awarded the 2008 HDI Product of the Year.

Custom Retailer named Chief’s PIWRF and MIWRF In-Wall Swing Arm Mounts as 2007 EXCITE! Award winners.

Chief’s CM4S57 Automated Speaker Accessory was named Electronic House Product of the Year for 2007.

Chief is a Certified Audio Visual Solutions Provider (CAVSP) and our staff has achieved a published level of certification to maintain a standard of excellence in the AV industry.

Installer’s Forum – Certified through CEDIA, NSCA and InfoCommRPA Mini Installer’s Forum – Certified through CEDIASafeguarding Your AV Investment – Certified through CEDIA

CONTINUING EDUCATIONAVIU, Ensuring a Secure Installation – Accredited by CEDIAOnline Learning, Building Innovative AV Ceiling Installations – Accredited by NSCA

CERTIFICATIONS & TRAINING

HDI SHOW 2008

Mounting SolutionS Product guide

Projector Mounts

Flat Panel Mounts

Swing Arm Wall Mounts

In-Wall Mounts

Fixed Wall Mounts

Tilt Mounts

Ceiling Mounts

Carts/Stands

Truss/Pole

autoMated Mounts

Monitor Mounts


www.chiefmfg.com

cHieF ManuFacturinG n a division oF Milestone av tecHnoloGies n www.chiefmfg.com

Milestone av technologies n P 800.582.6480/952.894.6280 n F 877.894.6918/952.894.6918 n [email protected] chief Mounts canada n p 877.345.4329 n F 888.377.5314 n [email protected] Milestone av technologies B.v. n p 31 (0)40 266862 0 n F 31 (0)40 2668615 n [email protected] Milestone av technologies ltd n p 86 755 8996 9226 n F 86 755 8996 9217 n [email protected] ©2008 Milestone av technologies, a duchossois Group company. 800107B 8/08. chief is a registered trademark of Milestone. all other brand names or marks are used for identification purposes and are trademarks of their respective owners. all patents are protected under existing designations. other patents pending.

e n d - u s e r f o c u s e d f a s t e r i n s t a l l a t i o n s u p e r i o r s e r v i c e p r o v e n q u a l i t y


FU

LL LINE

CA

TALO

G 2

00

8-2

00

9

10%

SW-COC-001865

Chief Catalog

Documents