Top Banner
09271 Rev: 0 CHEVROLET AVALANCHE – PART NO. 09271 INSTALLATION INSTRUCTIONS Congratulations on your purchase of the Husky Gear Box. The Gear Box was designed to fit under the rear seat of your truck or SUV. The Gear Box gives you a place to store loose items and clutter and ultimately help keep your vehicle organized. It’s designed to fit your vehicle with or without your Husky Liners in place and only takes a few minutes to install. PACKAGE CONTENTS Gear Box – Part No: 09271 (1) Installation Instructions (1) INSTRUCTIONS 1) Open and remove the Gear Box from the shipping box and protective plastic bag. 2) Lift the rear seats into the upright position and install the Gear Box as demonstrated below (fig. 1 and 2). Figure 1 Figure 2 3) Once you have organized, lower the rear seat bottoms and resume normal use. NOTE: Small loose items can potentially roll around and become somewhat annoying. Simply place these items in a rag, towel, etc… roll them up and place in the Gear Box. If you have questions about your installation or any other Husky product, please call us at: 1-800-344-8759 M-F 8:00 am to 5:00 pm Central Time.
1

CHEVROLET AVALANCHE – PART NO. 09271 INSTALLATION … · 2016-02-23 · 09271 Rev: 0 CHEVROLET AVALANCHE – PART NO. 09271 INSTALLATION INSTRUCTIONS Congratulations on your purchase

Aug 08, 2020

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: CHEVROLET AVALANCHE – PART NO. 09271 INSTALLATION … · 2016-02-23 · 09271 Rev: 0 CHEVROLET AVALANCHE – PART NO. 09271 INSTALLATION INSTRUCTIONS Congratulations on your purchase

09271

Rev: 0

CHEVROLET AVALANCHE – PART NO. 09271

INSTALLATION INSTRUCTIONS Congratulations on your purchase of the Husky Gear Box. The Gear Box was designed to fit under the rear seat of your truck or SUV. The Gear Box gives you a place to store loose items and clutter and ultimately help keep your vehicle organized. It’s designed to fit your vehicle with or without your Husky Liners in place and only takes a few minutes to install. PACKAGE CONTENTS Gear Box – Part No: 09271 (1) Installation Instructions (1) INSTRUCTIONS

1) Open and remove the Gear Box from the shipping box and protective plastic bag. 2) Lift the rear seats into the upright position and install the Gear Box as demonstrated below (fig. 1 and 2).

Figure 1 Figure 2

3) Once you have organized, lower the rear seat bottoms and resume normal use.

NOTE: Small loose items can potentially roll around and become somewhat annoying. Simply place these items in a rag, towel, etc… roll them up and place in the Gear Box. If you have questions about your installation or any other Husky product, please call us at: 1-800-344-8759 M-F 8:00 am to 5:00 pm Central Time.