Chemline Brochure

ValvesPiping

Flow Meters& Controls

Your Pipeline To Quality

Chemline

Industrial

Municipal

Environmental

Supplying innovative long term

solutions for the Industrial,

Municipal and Environmental

Sectors since 1968

Corrosion Resistance Solid Thermoplastics

www.chemline.com

55 Guardsman RdThornhill, ON

Canada, L3T 6L2

Tel: 905.889.7890Fax: 905.889.8553

[email protected]

ChemFlareTM

Connectionsfor True UnionValves3/8" – 1"

Giant ButterflyValves28" – 48"

Compact Ball Valves1/2" – 3"

PVDF DamperButterfly Valves1-1/2" – 24"

ElastomerSeated ButterflyValves1-1/2" – 24"

ChemValveTeflon LinedButterfly Valves2" – 12"

Cavity FreeBall Valves1/2" – 6"

Ball Check& Foot Valves1/2" – 4"

PW SeriesWafer CheckValves3" – 12"

Swing CheckValves3/4" – 8"

High CapacityBall Valves4" & 6"

FRP DamperButterfly Valves12" – 96"

ManualDiaphragmValves1/2" – 6"

PneumaticDiaphragmValves1/2" – 2"

Ball FloatValves1/2" – 1-1/2"

WP SeriesWafer CheckValves2" – 40"

Gate Valves1-1/2" – 14"

Lab Cocks1/4"

Globe Valves1/2" – 4"

Y-SedimentStrainers1/2" – 4"

Needle Valves1/4" – 1/2"

Low TorqueFlange Gaskets1/2" – 12"

Chemline Product Lines

Manual ThermoplasticValves• Ball Valves• Butterfly Valves• Diaphragm Valves• Check Valves• Ball Float Valves• Gate Valves• Globe Valves• Lab Cocks• Needle Valves• Strainers• Flange Gaskets

Size RangeChemline valves areavailable in a large sizerange: 1/4" to 96"

MaterialsPVC valves are least expensive.Other materials offer higherpressure/temperature ratings,chemical and abrasionresistance. For high purityliquids, PP is preferred overPVC. PVDF is used on thehighest purity applications.• PVC: 0 - 60oC (30 -140oF)• PP: –20 - 90oC (–5 - 195oF)• CPVC: 0 - 95oC (–30 - 203oF)• PVDF: –40 -120oC (–40 - 250oF)• PDCPD: –20 - 90oC (–5 - 195oF)• FRP: –40 - 120oC (–40 - 250oF)

Ends• True Union valves areavailable with Socket,Threaded, Butt (PP & PVDFonly), ChemFlareTM (for flaredTeflon® tubing) or Flangedconnections• Flanged or wafer bodyvalves fit between flanges,require bolts and usuallyflange gaskets

Seals• EPDM is the standardseal material• FPM/FKM (Viton®) isselected when better chemicalresistance is required• Other elastomers areavailable depending onapplication• Diaphragm valves areavailable with Teflon®

diaphragms offering thehighest chemical resistance

Metering &Proportional Ball Valves1/2" – 2"

Type 21True UnionBall Valves3/8" – 4"

Type 23Multi PortBall Valves1/2" – 4"

Tel: 905.889.7890 • www.chemline.comYour Pipeline To Quality Valves, Piping, Flow Meters and Controls

E SeriesElectric

Q SeriesElectric

V SeriesElectric

Electromni®

Electric

Type 730 NCPneumaticDiaphragmValves1/2" – 4"

A SeriesElectric

PG Series180o RotationPneumatic

PP SeriesPlasticPneumatic

SG SeriesGauge Isolators1/4" & 1/2"

AA SeriesAir & VacuumRelease Valves1-1/4" & 3"

AR Series Air ReleaseValves1/2" – 3"

PA SeriesAluminumPneumatic

Type 750PneumaticDiaphragmValves1/2" – 2"

Type 760ManualDiaphragmValves1/2" – 4"

Type 710PneumaticDiaphragmValves3/8" & 1/2"

Back Pressure/Relief & PressureReducing Valves3/8" – 4"

SB17 Mini BackPressure/ReliefValves1/4" – 3/8"

Stainless SteelBack Pressure/Relief Valves1/2" – 1"

EK SeriesPneumaticCharacterizedControl Valves1/2" – 4"

EHK SeriesPneumaticHigh PressureCharacterizedControl Valves1/2" – 4"

Variable AreaFlow Meters3/8" – 2-1/2"

EE SeriesElectricCharacterizedControl Valves1/2" – 4"

Chemline Product Lines

Controls &Flow MetersGauge Isolators• For any pressure instrument

Air Release Valves• Both economical and

performance models

Back Pressure/Relief ValvesPressure Regulating/Reducing ValvesCharacterizedControl Valves• Single seat globe type with

a PTFE bellow stem seal, available with a selection ofCv’s characterized eitherlinear or equal percentage.

Variable Area Flow Meters• For water, chemicals or air,

maximum 220 USGPM (water)

Actuation& ActuatedValvesElectric Actuators• Four different series provide

a range of control featuresand output torques up to2,655 in.-lb. These willpower all Chemline ball andbutterfly valves up to 18".

Pneumatic Actuators• P Series is a premium quality

line designed for longcycling life in demandingindustrial applications.Output torques are up to31,300 in.-lb. spring return (SR) and 40,660 in.-lb. doubleacting (DA) with 80 psi air. They will power all Chemlineball and butterfly valves up to 24" DA and 20" SR

Actuation Service• Chemline supplies actuators

separately and actuation service for any metal valves.

700 SeriesDiaphragm Valves• Modular line of

pneumatically actuated and manual weir diaphragmvalves up to 4". They share common bodies and diaphragms. Only five different actuators sizes power nine valve sizes(730 Series).

PH Series HighTemperaturePneumatic

P3 SeriesStainless SteelPneumatic

Type 720ManualDiaphgramValves3/8" & 1/2"

Tel: 905.889.7890 • www.chemline.comYour Pipeline To Quality Valves, Piping, Flow Meters and Controls

Oval GearFlow Sensors

RemoteFlow Sensors

MiniFlow Sensors

Direct MountFlow Sensors

Hot-TapFlow Sensors

Ultra LowFlow Sensors

BlindTransmitters

Ultra LowFlow BlindTransmitters

AdjustableFlow Switches

AdjustableUltra LowFlow Switches

Flow Monitor/Transmitters

Batch ControllersBattery PoweredFlow Monitor

No-FlowSwitches

ElectromagneticFlow Monitor/Transmitters

Hot-TapElectromagneticFlow Transmitters

DirectMount

PanelMount

Paddle Wheel Flow Meters & Instrumentation

Instruments• Modular Design: 1/4" DIN

size instruments can bemounted 3 ways: directlyto sensor, remotely topanel or wall mounted

InstallationFittings• Sensor installation

fittings are availablefor all sizes and typesof pipes

Tees:1/2" to 1-1/2"

Bolt-On Saddles:2" to 12"

Metal Strap-On Saddles:3" to 18"

Wafer Fittings:10" and 12"

Weld-On Adaptors:1-1/2" to 24"

WallMount

Flow Sensors• Available in CPVC, PVDF,

316L Stainless Steel orBrass

• NEMA 6,6P (IP68) sensorsare available for outdoor/submersible applications

• High Accuracy: ± 0.75%of full scale with standardK factor

• Excellent low flowmeasurement. Accuratelymeasures flow velocitiesdown to 0.15 m/s(0.5 to 25 ft./sec.)

• ECTFE (Halar®) rotor,ceramic shaft andbearings: Offers longservice life on corrosiveindustrial services

ElectromagneticFlow Transmitters

Tel: 905.889.7890 • www.chemline.comYour Pipeline To Quality Valves, Piping, Flow Meters and Controls

Other Chemline Product Lines

UltraSonics

• Vortex shedding flowmeters provide extremelyaccurate and repeatableflow measurements

Level Controls• Non-contact ultrasonic

level measurement• Ideal for chemicals, oil,

water, wastewater

• Advanced thermoplasticsfor the highest corrosionresistance. Designed towithstand harshenvironments

• Low maintenance

• Provides better reliabilityand accuracy than contact level devices

• A complete line ofultrasonic flowmeasuringequipment, includingportable and fixed position transit timeflow meters

• Ideal for full pipe, liquid flow applications

Tel: 905.889.7890 • www.chemline.comYour Pipeline To Quality Valves, Piping, Flow Meters and Controls

Type RVLIn-Line Flare

Type RVLWafer Style

Type RVLIn-Line

FlowLine Technology:Sensors emit 4 high frequency soundpulses per second from the base of thetransducer. Each pulse travels throughthe air gap, reflects off the liquid surfaceand returns to the transducer where itsreceived. The temperature compensatedsensor calculates the time interval frompulse transmission to receipt, andtranslates this into a distancemeasurement based upon the speed ofsound.

Flowline sensors feature the patented,auto-adaptive Digital Signal Processingtechnology that delivers accurate andreliable ultrasonic level measurementfrom 1m-10m.

Vortex Shedding Technology:As a fluid moves aross the internalstrut ‘bluff body’, alternating vorticesare created causing pressurefluctuations. These fluctuations aredetected and converted to an analogsignal or pulse output. The frequencyof the vostices is directly proportionalto the flow.

Digiflow UltraSonics Technology:Complete line of ultrasonic flowmeasurement equipment, includingportable and fixed position transit timeflow meters. These meters are ideal forfull pipe, liquid flow applications; theyare non-invasive and provide a highdegree of accuracy. Suited for a widerange of pipe materials, in pipediameters from 1/4" (6.35 mm) to over120" (3,048 mm), these meters aredesigned for long service life and lowmaintenance cost.

• pH/ORP and Conductivitysensors and instruments

Type P6.02pH/ORP

Type C5.02Conductivity

ChemX3 Technology:ph/ORP and conductivity monitorsand controllers complete with avariety of sensors, probes andinstallation fittings.

Thermoplastic Manifolds

Tel: 905.889.7890 • www.chemline.comYour Pipeline To Quality Valves, Piping, Flow Meters and Controls

Materials/Dimensions:• PVC, CPVC, PP, PE, PVDF, Halar (ECTFE)• 3" to 10" and larger

Applications:• Waste Water Treatment Systems• Waste Treatment Systems• Ice Rinks• Soil Remediation• Mixing Tanks in Fish Farms• Solar Water Heating

Features & Benefits:Chemline thermoplastic manifolds arefabricated using butt fusion, not hot air handwelding or socket fusion. Saddles are welded bya CNC machine. The resulting product isstronger, more reliable and cost effective.Dimensional tolerances are tighter also.

CNC Welding Technology offers:

Exact Weld Temperatures, Pressures and Timeare Controlled• Better weld quality and resulting reliability

Dimensions are Controlled Exactly• Precise dimensional tolerances for spigot

spacing, orientation and offsets

Welding Parameters are Recorded andDownloadable (heat, pressure, operation times forheat soak, cooling, etc.)• Manufacturing traceability and quality

assurance

Repeatable Manufacturing Process• An identical replacement manifold of the

same quality can be made years later

Other Features:Pressure Tested• For quality assurance

Unlimited Branch Options• Spigot, threaded, flanged, hosebarbs, ends for

valves, installation adaptors for flow meters,multiple branch rows and different port sizes.

Approvals:• Available in NSF-61 approved material for

water purification equipment or NSF-pwapproved material for potable water use.

• Canadian Food Inspection Agency approvedfor use with food products (PVDF only).

• No threads

• No cementing

• No leaks

• A superior connection method fordosing system components

• Designed for sodium hypochloriteand other aggressive services

• Flare connections are easy and quickto install, are easily disassembled andadd no dead volume

• PVC, CPVC or PVDF

• 1/2", 3/4" and 1"

Electromagnetic Flow Transmitters• Less costly and easier to install & remove

compared to full-port magmeters• Local LCD display is now available• Hot-Tap version is available• Installation fittings are available for

all types and sizes of pipe

Mini Flow Sensors & Tee Fittings• Low cost

• Compact size

• Designed for water treatmentequipment

• Rugged and reliable

• PVC Tee fittings available 1/2" to 1-1/2"

Type F3.10 &Tee Fitting

Tel: 905.889.7890 • www.chemline.comYour Pipeline to Quality Valves, Piping, Flow Meters and Controls

Type F9.60/F9.63

Other Chemline Product Lines

PipeWeldingMachines• For PP, PE, PVDF, PFA or

ECTFE pipe, fittingsand valve ends

• Butt or socket fusionmodels available forrent or purchase

• Butt welding machinestypes are heatingelement or non-contactinfra red (IR)

• Field or shop fabricationmachines available forall pipe size ranges

PipingSystems• Polypropylene (PP)

Pipe & Fittings 1/2" to 56"• PolyPure® Unpigmented PP

Piping System 1/2" to 4"• PVDF Pipe & Fittings to 12”• ECTFE (Halar®) Pipe

& Fittings 1" to 4"• AirPro® Polyethylene

Piping System 1/2" to 4"• Sani-Tech® PP & PVDF

Piping Systems 1/2" to 4"• Dual Containment

Pipe & Fittings• Custom Fabrication• Manifold Fabrication

Teflon® Tube,Fittings,Valves &Piping• PFA Tube, ChemFlareTM

Fittings, Valves & Tools1/8" to 1"

• ChemBondTM PFA Butt Weld Pipe & Fittings1/2" to 2" and Butt Weld Tube Fittings 1/4" to 1"

Your Pipeline To Quality Valves,Piping, Flow Meters and Controls

55 Guardsman RoadThornhill, OntarioCanada, L3T 6L2Tel: 905.889.7890Fax: 905.889.8553www.chemline.com

Polypropylene butt welded piping installation

4001 Heating ElementButt Welding ShopMachine

Debeaders, Pipe Saws& Other FabricationTools

Maxiplast Heating ElementButt Welder for Field or Shop

PE manifold produced on Chemline’sCNC saddle welding machine

CPCB 3-11 ©Chemline Plastics Limited 2011