This revision guide is designed to help you study for the chemistry part of the IGCSE Coordinated Science course. The guide contains everything that the syllabus says you need you need to know, and nothing extra. The material that is only covered in the supplementary part of the course (which can be ignored by core candidates) is highlighted in dashed boxes: Some very useful websites to help you further your understanding include: •http://www.docbrown.info/ - whilst not the prettiest site this contains a lot of very useful and nicely explained information. •http://www.bbc.co.uk/schools/gcsebitesize/scienc e/ - well presented with many clear diagrams, animations and quizzes. Can occasionally lack depth. •http://www.chemguide.co.uk/ - whilst mostly targeted at A-Levels this site contains very detailed CHEMISTRY REVISION GUIDE CHEMISTRY REVISION GUIDE for IGCSE Coordinated Science Whilst this guide is intended to help with your revision, it should not be your only revision. It is intended as a starting point but only a starting point. You should make sure that you also read your text books and use the internet to supplement your study in conjunction with your syllabus document. Whilst this guide does contain the entire syllabus, it just has the bare minimum and is not in itself sufficient for those candidates aiming for the highest grades. If that is you, you should make sure you read around a range of sources to get a deeper knowledge and understanding. information suitable for those looking to deepen their knowledge and hit the highest grades. Finally, remember revision is not just reading but should be an active process and could involve: •Making notes •Condensing class notes •Drawing Mind-maps •Practicing past exam questions •Making flashcards The golden rule is that what makes you think makes you learn. Happy studying, Mr Field.
20
Embed
CHEMISTRY REVISION GUIDE for IGCSE Coordinated Scienceigcsecoordinatedscience-dnl.wikispaces.com/file/view/Chemistry... · This revision guide is designed to help you study for the
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
This revision guide is designed to help you study for the
chemistry part of the IGCSE Coordinated Science course.
The guide contains everything that the syllabus says you
need you need to know, and nothing extra.
The material that is only covered in the supplementary
part of the course (which can be ignored by core
candidates) is highlighted in dashed boxes:
Some very useful websites to help you further your
understanding include:
•http://www.docbrown.info/ - whilst not the
prettiest site this contains a lot of very useful and
nicely explained information.
•http://www.bbc.co.uk/schools/gcsebitesize/scienc
e/ - well presented with many clear diagrams,
animations and quizzes. Can occasionally lack
depth.
•http://www.chemguide.co.uk/ - whilst mostly
targeted at A-Levels this site contains very detailed
CHEMISTRY REVISION GUIDE
for IGCSE Coordinated Science
CHEMISTRY REVISION GUIDE
for IGCSE Coordinated Science
Whilst this guide is intended to help with your revision, it
should not be your only revision. It is intended as a
starting point but only a starting point. You should make
sure that you also read your text books and use the
internet to supplement your study in conjunction with
your syllabus document.
Whilst this guide does contain the entire syllabus, it just
has the bare minimum and is not in itself sufficient for
those candidates aiming for the highest grades. If that is
you, you should make sure you read around a range of
sources to get a deeper knowledge and understanding.
targeted at A-Levels this site contains very detailed
information suitable for those looking to deepen
their knowledge and hit the highest grades.
Finally, remember revision is not just reading but should
be an active process and could involve:
•Making notes
•Condensing class notes
•Drawing Mind-maps
•Practicing past exam questions
•Making flashcards
The golden rule is that what makes you think makes you
learn.
Happy studying, Mr Field.
C1: THE ELEMENTS OF
CHEMISTRY
Atom: The smallest
particle of matter
An atom: Some atoms:
Molecule: A small
particle made from
more than one atom
bonded together
Molecules of an
element:
Molecules of a
compound:
Element: A
substance made of
only one type of
atom
A solid element: A gaseous element:
Compound: A
substance made
from two or more
A solid compound A gaseous
compound:
CHEMICAL FORMULAS
Formulas tell you the atoms
that make up a compound
Eg 1. H2O – two H, one O
Eg 2. C2H6O – two C, six H, one
O
Eg 3. Mg(OH)2 – one Mg, two
O, two H*
Eg 4. CH2(CH3)2 – three C, 8 H*
*In this case everything in
brackets is doubled
CHEMICAL EQUATIONS
•Show the reactants you start with and the products you make
•Must contain an arrow (�) NOT an equals sign (=)
•Must be balanced – same number of atoms on each side
Eg. CH4 + O2 � CO2 + H2O
This is unbalanced as there are 4 ‘H’ on the left but only 2 ‘H’ on the
right. This must be corrected by adding a ‘2’ in front of the ‘H2O’:
CH4+ O2 � CO2 +2H2O
Now the H balances but there 4 O on the right and only 2 on the left.
This must be balance by placing a ‘2’ in front of the ‘O2’
CH4 + 2O2 � CO2 + 2H2O
Now there is 1 ‘C’, 4 ‘H’ and 4 ‘O’ on each side so it balances.
MOLES AND MOLAR MASS
•A ‘mole’ is the name we give to the number
6.02x1023 – it is used to talk about the numbers of
particles involved in chemical reactions.
•It is the number of atoms such that one mole has
the same mass in grams as an atom’s atomic mass.
•Eg 1: Carbon has an atomic mass of 12.0,
so a mole of carbon has a mass of 12.0g
•Eg 2: Iron has an atomic mass of 55.8, so
masses of the elements in its formula:
•Eg 1: C2H6O (C=12.0, H=1.0, O=16.0)
Molar mass = 12.0 x 2 + 1.0 x 6 + 16.0 x 1 = 46.0g
The number of moles of a substance present in a
given mass is given by:
Moles = mass used
molar mass
Eg: How many moles of ethanol (C2H6O) are
Solids, Liquids and
Gases
from two or more
different elements
bonded together
Mixture: A
substance made
from two or more
elements or
compounds mixed
but not joined
A mixture of compounds and elements:
•Eg 2: Iron has an atomic mass of 55.8, so
a mole of iron has a mass of 55.8g
•The molar mass of a compound is the sum of the
Eg: How many moles of ethanol (C2H6O) are
present in 69.0 g?
Moles = mass used = 69.0 = 1.5 mol
molar mass 46.0
MOLE CALCULATIONS
What mass of carbon dioxide (the unknown) is needed to produce
when 50g iron (the known) oxide is reduced to iron.
•Balanced Equation: 2Fe2O3 + 3C � 4Fe + 3CO2
•Moles of Known (Fe2O3)= mass / molar mass
= 50.0 / (55.8 x 2 + 16.0 x 3) = 0.313
•Moles of Unknown (CO2) = (moles of known /knowns) x unknowns
= (0.313 / 2) x 3 = 0.470 mol
•Mass of Unknown (CO2) = moles x molar mass
= 0.470 x (12.0 x 1 + 16.0 x 2) = 20.7g
COMBINING POWERS
This is the number of ‘bonds’ an element forms
The combining power is given by the periodic table.
•Groups I and VII form 1 bond
•Groups II and VI form 2 bonds
•Groups III and V from 3 bonds
•Group IV forms 4 bonds
•Group VIII forms 0 bonds
•Eg: NH3 – N (Gp V) has three bonds to Hs, each of the
three Hs (Gp I) has one bond to N.
ATOMIC STRUCTURE
Atoms are made of:
Protons: mass = 1, charge = +1
Neutrons: mass = 1, charge = 0
Electrons: mass = 0, charge = -1
In a square on the periodic table
the smaller number, the proton
number gives the number of
protons or electrons and the
bigger number, the nucleon
number the number of protons
and neutrons together.
Eg 1: Boron has 5 protons,
6 neutrons, 5 electrons
Eg 2: Phosphorus has 15
protons, 16 neutrons 15
electrons
C2: CLASSIFYING THE
ELEMENTS
Structure of the Periodic Table (PT on last page!)
Elements arranged in order of increasing proton number.
PERIODS:
•The rows in the periodic table.
•For example lithium, carbon and chlorine are all in period 2.
GROUPS:
•The columns in the periodic table.
•Use roman numbers: I, II, III, IV, V, VI, VII, VIII
•For example, F, Cl, Br, I are all in Group VII (the halogens)
•Elements in the same group have similar properties and react
in similar ways.
•Eg. The halogens all react in the same way with sodium to
form sodium fluoride (NaF), sodium chloride (NaCl) and sodium
bromide (NaBr)
Periodic Patterns
Across a each period (row) you see the same patterns repeated. For
example in each period:
•The size of atoms decreases from Group I to Group VIII
•The number of electrons in the outer-shell increase by one as
Non-metals
Transition Metals
Gro
up
VIII: N
ob
le G
ase
s
Gro
up
I: Alk
ali M
eta
ls
Gro
up
II: Alk
ali-E
arth
Lanthanides and Actinides (metals)
Other
Metals
H
ME
TALS
Conduct
electricity,
conduct heat,
higher density,
malleable
NO
N-
ME
TALS
Insulate
electricity,
insulate heat,
lower density,
brittle
Gro
up
VII: H
alo
ge
ns
Group I: The Alkali Metals (Li, Na, K ...)
Oxides
Formed when an element
reacts with oxygen for
example: lithium oxide
(Li2O), calcium oxide (CaO),
carbon dioxide (CO2),
sulphur trioxide (SO3)
ACIDIC OXIDES •The number of electrons in the outer-shell increase by one as
you move across each group
•The melting point increases from Group I to Group IV and
then decreases from Group IV to Group VIII
Group I: The Alkali Metals (Li, Na, K ...)
As you go down Group I, the alkali metals get:
•More reactive
•More dense
•Harder
•Higher melting point
The alkali metals react with water in the same way:
Metal + water � metal hydroxide + hydrogen
2Li + 2H2O � 2LiOH + H2
The metal hydroxide is an alkali – it makes a pH greater than 7
when it dissolves in water (hence the name alkali metals)
Lithium is high in Group I so reacts much more slowly than
potassium which is lower in the group.
ACIDIC OXIDES
Many non-metal oxides
dissolve in water to make
acids: carbon dioxide makes
carbonic acid, sulphur
trioxide makes sulphuric acid
BASIC OXIDES
Some metal oxides are bases
(such as CaO): they
neutralise acids. Those that
also dissolve in water are
called alkalis (such as Na2O).
Group VII: The Halogens (F, Cl, Br, I)
As you go down Group VII, the halogens get:
•Less reactive
•More dense
•Higher melting point (F/Cl – gases, Br – liquid, I – solid)
•Darker coloured (pale green� dark brown)
Chlorine was used as a weapon because it’s very reactive,
fluorine is so reactive it corrodes the bottles it is stored in!
The Challenge
You need to be able to use an element’s position in the periodic table
to predict its properties. This means being familiar with the properties
of groups I, II, VII and VIII and understanding them in depth.
You may wish to research groups III, IV and VI in more detail using
textbooks or the internet)
Group III (B, Al.....)
Does not follow simple patterns – B
and Al react in very different ways.
The oxide of aluminium (Al2O3) is
amphoteric – this means
sometimes it acts like an acid and
sometimes like a base.
Group IV (C, Si, Ge...)
Carbon exists in different forms
(allotropes) – diamond, graphite,
Buckminster fullerene, nanotubes.
Si and Ge are semiconductors –
sometimes they conduct electricity
and sometimes not.
Group VI (O, S, Se...)
Main interesting point is the oxides
of sulphur: sulphur dioxide (SO2)
and sulphur trioxide (SO3) both
exist and dissolve to form
sulphurous- (H2SO3) and sulphuric-
(H2SO4) acids respectively.
C3: PETROCHEMICALS –
Refining Crude Oil
Hydrocarbons
Hydrocarbons are compounds of hydrogen and carbon only.
The carbons are linked together with hydrogen atoms attached
to them. They carbons can be arranged in straight chains (1),
branched chains (2) or even rings (3).
Refining Oil – Fractional Distillation
Oil is a mixture of hundreds of hydrocarbons. This mixture has to be separated into its useful
components using fractional distillation. Very hot crude oil is pumped into the fractionating column
where the hydrocarbons separate out by their boiling points, rising through the column until they get
cold enough to condense. The compounds that condense at a particular temperature are called a
FRACTION.
1
23
fuel gas, 1-4 carbons
petrol, 5-9 carbons
naptha, 6-11 carbons
kerosene,
11-18 carbons
diesel, 15-21 carbons
COOLER
Bubble Caps: the
gaseous fractions
bubble up through
these until they get cool
enough when they then
condense.
ALKANES
The simplest
hydrocarbons are the
alkanes, they are
saturated hydrocarbons
which means they only
contain single bonds. They
are unreactive and make
good fuels and solvents.
ALKENES
These are unsaturated which means they contain at least one
double bond. They are very valuable as a starting point for
making lots of other compounds....more on the next page!
As you move down the column, the fractions have longer
carbon chains. This increases the attractive forces between
molecules which leads to:
•Higher boiling points
•Higher viscosity
•Lower flammability
Fuel Gas – used for fuel, and to make other chemicals
Naptha – used mostly to make other useful compounds
Kerosene – fuel for aeroplanes
Fuel oil – fuel for large ships
Bitumen – used to surface roads
fuel oil, 20-27 carbons
Greases and wax,
25-30 carbons
bitumen, 35+ carbonsHOTTER
FORMULAS
Molecular formula: tells you all the
atoms present in a molecule. Quick to
write but little information.
Graphical formula: drawing showing
how all the atoms in a molecule are
connected – takes longer but tells you
much more information.
C3: PETROCHEMICALS –
Using the Products
Ethene
The gas ethene can be made into many other
compounds so is too valuable to burn.
The double bond in ethene and other alkenes has a cloud of
electrons around it which makes them very reactive. The
reactions of alkenes involve adding things to the double bond
Reaction with Steam
Ethene reacts with steam in the presence of a phosphoric acid
catalyst to make ethanol which can be used as a solvent or to
make other useful compounds.
C2H4(g) + H2O(g) ���� C2H5OH(g)
Testing for unsaturated hydrocarbons
When an orange solution of bromine is added to alkenes in the
Cracking
Because there is a greater need for hydrocarbons with shorter carbon chains we sometimes need to
cut longer chains into shorter ones using the process of cracking.
A long alkane is heated, vaporised and passed over a ceramic catalyst produce a shorter alkane and
an alkene.
Eg. 1: C8H18 � C4H10 + C4H8
Eg. 2: C10H22 � C7H16 + C3H6
Note:
•The with the alkenes for each carbon there are 2 H (CnH2n); with the alkanes, for each C there are 2 H
plus 2 extra (CnH2n+2).
•Any combination of alkene and alkane can be made, including straight and branched chains, so long
as the numbers of atoms balance.
Polymers (plastics)
Polymers are very large molecules made from lots of smaller ones (monomers) joined together.
Finally, to write a balanced equation, you need to get the right number of waters, the simplest way
is to remember that each ‘H+’ from an acid makes one water.
K+ has one plus charge
SO42- has two minus charges
You need two K+ to balance out one
NO3- so the formula is K2SO4
Mg2+ has two plus charges
PO43- has three minus charges
So you need three Mg2+ to balance out
two PO43- so the formula is Mg3(PO4)2
Eg 1. Potassium hydroxide and sulphuric acid
As we have seen it makes K2SO4 which requires
one H2SO4 and two KOH. Two H2O are made
since the one H2SO4 produces two H+ ions
H2SO4 + 2KOH � K2SO4 + 2H2O
Eg 2. Magnesium phosphate
As we have seen it makes Mg3(PO4)2 which
requires two H3PO4 and three Mg(OH)2. Six H2O
are made since each of the two H3PO4 produces
three H+ ions.
2H3PO4 + 3Mg(OH)2 � Mg3(PO4)2 + 6H20
The pH Scale
•Acids have a pH of
less than 7
•Alkalis have a pH
greater than 7
•pH can be
measured with
colour changing
indicators or digital
pH meters
Some uses of Bases
Antacids, used to cure indigestion, are basic salts – such as
carbonates – that react with and neutralise acids.
Lime (calcium oxide, CaO) is used on a large scale to neutralise
acidic industrial waste.
Testing Carbonates
To test for carbonates, add a
sample to some acid and
bubble the gas collected
through limewater. If the
limewater goes cloudy, the
sample contained a carbonate.
How much energy?
Carry out a neutralisation reaction in an insulated container
such as a polystyrene cup. By measuring the temperature
change and the volumes you can work out how much heat was
given out by the reaction (H = m.c.ΔT). You can then divide this
by the number of moles of acid you had to work out how much
energy one mole of acid produces.
C10: SOIL, ROCKS AND RATES
Rates of Reaction
For a chemical reaction to happen, the reacting particles need
to collide with enough energy. Anything that increases the
number of collisions or their energy will increase the rate.
Temperature
Increasing temperature increases the rate of a reaction
because particles are moving faster which means more
collisions and higher energy collisions.
Concentration
Increasing the concentration of a solution increases the rate of
a reaction because it means there are more particles available
to react which leads to more collisions.
Surface Area/Particle size
Increasing the total
surface area of
The Rock Cycle
The rocks that make up the
Earth’s surface are in a constant
state of slow change that takes
place on a timescale of millions
of years. Igneous rocks are
formed by magma from the
mantle that comes out through
volcanoes or moves to near the
surface and cools before
erupting. Sedimentary rocks
are formed by small particles of
rock that get eroded ,
transported and built up in a
layer thick layer that squashes
the particles at the bottom
together forming new rock.
Metamorphic rocks are formed
when sedimentary rocks get hot enough to partially melt, changing their structure. This process of
constant change is called the rock cycle.
Weathering Some Uses of Rockssurface area of
particles (by using
finer powder)
increases the rate of a
reaction because it
means more particles
at the surface are
exposed to collisions.
How fast?
On a graph showing the change in concentration of reactants
or products, the gradient of the line tells you the reaction rate:
steeper = faster,
flat = stopped
Weathering
This is the process whereby rocks are broken into ever
smaller pieces by exposure to the environment. There are
three classes of weathering:
•Physical: for example water (the force of waves and
rivers knocking bits off), exfoliation (caused by the
day/night heating/cooling cycle leading to cracks that
gradually expand over time) or freeze-thaw (water
seeps into cracks, freezes, expands and enlarges the
crack).
•Chemical: for example hydrolysis (when rocks like
feldspar react with acidic rainwater to form kaolin
(china-clay)) or carbonation (naturally occurring
carbonic acid in rain water (dissolved CO2) reacts with
limestone to form soluble calcium hydrogen carbonate
(Ca(HCO3)2))
•Biological: the force of plants roots growing into
cracks and forcing them apart.
Weathering releases nutrients present in the rocks and so
is vital for making soils fertile.
Some Uses of Rocks
Limestone:
•Used to remove impurities during iron
production
•Lime (CaO, produced by thermal
decomposition of limestone) used to
raise pH of acid soils
Sand:
•Used in glass production
Yet More Tests
You need to remember these chemical
tests:
•Oxygen (see Unit C7)
•Hydrogen – lighting a test-tube of H2
with a splint gives a squeaky pop
•Carbon dioxide – when bubbled
through limewater it turns it cloudy.
C11: FERTILISERS
Ammonia, NH3
The ammonia is alkaline gas – forming
ammonium hydroxide (NH4OH) when it dissolves
in water. Ammonia is very important since it is
used to turn unreactive nitrogen gas (N2) into
important nitrate (-NO2/3) containing compounds
such as fertilisers and explosives, this is known as
nitrogen fixation.
The Haber Process
This the process used to produce ammonia from nitrogen and
hydrogen gases.
N2(g) + 3H2(g) � 2NH3
The reaction is reversible which means some of the products
turn back to reactants as soon as they are made, this means it
Sulphuric Acid, H2SO4
Sulphuric acid is another important chemical used in huge
range of industrial processes. It is produced by the Contact
Process. There are three chemical reactions. First sulphur is
burnt in air to produce sulphur dioxide (SO2):
S + O2 � SO2
Secondly SO2 is reacted with further oxygen to make sulphur
trioxide (SO3):
2SO2 + O2 � SO3
This reaction is reversible, so to maximise the amount of SO3
made, they use a high temperature (425OC), medium-high
pressure (1-2 times atmospheric pressure) and a catalyst
(vanadium (V) oxide, V2O5). Finally, the sulphur trioxide is
produced by first dissolving it in sulphuric acid to make oleum
(H2S2O7) which then makes more sulphuric acid on the addition
of water:
SO3 + H2SO4 � H2S2O7
H2S2O7 + H2O � 2H2SO4
Fertilisers
Fertilisers are chemicals applied
to plants to improve their growth
and increase the amounts of
products such as fruits, nuts,
leaves, roots and flowers that
they produce for us. They work by
supplying plants with the vital
elements they need including
nitrogen - in the form or nitrate
(NO3- containing) salts,
phosphorous – in the form of
phosphate (PO43- containing) salts
and potassium (K+ containing)
salts.
Salts containing suitable ions can
be prepared by reacting various
combinations of potassium
hydroxide, ammonia, nitric acid
and phosphoric acid (see Unit C9).Nitric Acid (HNO3)
Nitric acid is prepared via a number of steps starting with the turn back to reactants as soon as they are made, this means it
takes a long time to make an economical amount of ammonia.
To speed it up, the reaction is done at high temperature
(~450OC), high pressure (~200 times atmospheric pressure) and
with a catalyst (iron oxide).
oxidation of ammonia to nitric oxide (NO):
4NH3 + 5O2 � 4NO + 6H2O
This reaction is quite slow so a platinum catalyst is used to
speed it up. Next, the nitric oxide is oxidised to nitrogen
dioxide (NO2):
2NO + O2 � 2NO2
Finally the nitrogen dioxide is reacted with water to produce
nitric acid (HNO3):
3NO2 + H2O � 2HNO3 + NO
More Tests....ayooohhhh!!
You need to remember the
following tests:
•Ammonium ion (NH4+) – add a
few drops of cold sodium
hydroxide. If ammonium is
present it will produce ammonia
which you can smell and the
fumes will turn damp red litmus
blue.
•Nitrate ion (NO3-) – boil the
sample with sodium hydroxide
and aluminium foil. If nitrate is
present, ammonia will be
produced so the fumes will turn
damp red litmus blue
Eutrophication
When it rains on fields that have been treated with nitrate
fertilisers, they can dissolve in the rain water and be washed
through the soil into streams, rivers and lakes. The nitrates
then fertilise the growth of lots of algae in the water. When
this dies, it sinks to the bottom and is rapidly decomposed by
bacteria which use up most of the oxygen dissolved in the
water, causing most fish and other aquatic life to suffocate.
This process if called eutrophication and is a major problem.
This is not such a problem with phosphate salts since they are
much less soluble so do not make it to the water in such large
amounts and potassium on salts on their own can not cause
such an effect.
Ammonia and Ammonium
Ammonia (NH3) is a gaseous
compound the forms an alkali
when it dissolves in water.
The similarly named ammonium
(NH4+) is an ion formed when
ammonia reacts with acids
forming ammonium salts such
as ammonium nitrate (NH4NO3) or ammonium sulphate
((NH4)2SO4).
C12: DYES AND DRUGS
Dyes
Dyes are compounds used to colour fabrics.
Initially many dyes were produced from natural substances, for
example ‘tyrian purple’ was produced from sea-snails, ‘red
carthamine’ from safflowers and turmeric was used to dye
things yellow. More recently, synthetic dyes have been
invented, the first of which was the mauve coloured dye
‘mauvine’ invented by William Perkin in 1856. Synthetic dyes
have replaced natural ones for most uses.
Substances called mordants are often added to help fix dyes to
their fabrics. Before modern chemicals, one of the most widely
used mordants was urine!
Melting/Boiling Point
The melting and boiling point of substance
depend on how pure they are. For example Drugs
Paper Chromatography
Paper chromatography is a technique that can be
used to separate mixtures of dyes or pigments
such as chlorophyll. Firstly a very strong solution
of the dye-mixture is prepared, this is then used to
build up a small and intensely coloured spot on a
piece of absorbent paper. This is then placed in a
jar of solvent (with a lid). As the solvent soaks up
the paper, it dissolves the coloured spot, causing it
move up the paper as the solvent does. However
because dyes have different levels of solubility,
they move up the paper at different speeds
causing the individual colours to separate out. The
solvent or combination of solvents can be changed
to get the best possible separation of spots.
Purity
It is important for chemists to be able to produce
pure substances, this is especially the case for
things like food additive or drugs that are used in depend on how pure they are. For example
water boils at 100OC but if you ‘pollute’ it with
some salt, the melting point decreases to minus
3-4OC and can increase the boiling point to 103-
4OC.
This effect is often used by chemists to judge the
purity of the compounds they have made.
Drugs
Drugs are chemicals that are used to change (generally to
improve) physical or mental wellbeing. Many drugs have come
from the study of plants, which is one of many reasons we
should do all we can to protect the rainforests. Example include
quinine used to treat malaria from the cinchona tree,
vincristine from the rosy periwinkle flower used to treat
childhood leukaemia and procaine from the coca plant used as
a local anaesthetic.
Nb. You do not need to
remember these
vincristine
procaine
quinine
Analgesics
Analgesics are drugs that relieve pain – better
known as painkillers. Common examples include:
Aspirin
Paracetamol
things like food additive or drugs that are used in
the human body. Whilst the drug or food
additive itself may not be harmful to the body,
there is no guarantee that any impurities won’t
be. Because of this, chemists use a wide range of
techniques including recrystallisation,
chromatography and measuring the melting
point to test the purity of their products.
Chemotherapy
Chemotherapy refers to taking specific drugs
such as ‘cis-Platin’ that are designed to kill
cancerous tumours. Most chemotherapy drugs
generally target cells that divide rapidly – like
cancer cells but also healthy cells like those
found in bone marrow and the digestive tract.
This means chemotherapy, whilst effective,
takes a very heavy toll on the body.
C13: COLLOIDS
Colloids
A colloid is a mixture of one very fine particles of one phase of
matter evenly spread throughout another. There are three
major types of colloid:
•Sol – fine particles of solid suspended in a liquid, for example
blood (red blood cells suspended in water) or paint (pigment
particles suspended in water)
•Gel – small droplets of liquid trapped in a solid matrix, for
example strawberry jelly (water trapped in solid gelatine)
•Emulsion – fine droplets of one liquid suspended in another,
for example mayonnaise (oil droplets suspended in vinegar) or
milk (fat droplets suspended in water)
Diagram shows droplets of
oil (blue) suspended in water
Emulsifiers
An emulsifier is a substance used to help make an emulsion by allowing the two liquids to mix
without dissolving. For example you can’t make mayonnaise without egg yolk, the lecithin in the egg
yolk is an emulsifier and allows the particles of oil to stay suspended in the vinegar. Without egg
yolk the oil and vinegar would separate out straight away.
Emulsifiers work in a similar way to detergents. They are large molecules with one end able to
dissolve in one type of substance and the other end able to dissolve in another type. So for example,
in an oil/water emulsion, one end of the emulsifier can dissolve in water and the other in oil
allowing small droplets of oil to be suspended in the water (or vice versa).
oil (blue) suspended in water
(red)Colloids and Light
Colloids are always opaque (not transparent),
light can’t travel through them.
The reason for this is that as photons of light hit
the suspended particles they bounce off in a
random direction rather than passing straight
through, this is called scattering. You can see this
effect when you bend a plastic ruler too much.
Normally light passes straight through it but
when you bend it just enough, you cause small
areas of plastic molecules to rearrange
themselves whilst others stay as they were.
When light hits these areas it bounces off rather
than passing straight through so the ruler
appears white rather than transparent.
Longer (redder) wavelengths of light get scattered less than shorter (bluer) ones. This is what
causes the colours of a sunset – the bluer colours of sunlight get scattered by dust suspended in
the air whereas the redder colours are able to pass straight through.
This box is blank because there’s just not that much in this unit!
C14: FUELS
Combustion (burning)
In combustion, a fuel reacts with oxygen
releasing heat. There are three requirements
for fire, described by the fire-triangle. If the
fuel is a hydrocarbon or carbohydrate the
products of combustion are water and carbon
dioxide (carbon monoxide if oxygen is limited).Fuel
A fuel is any substance that is burnt for the heat energy it
releases. Good fuels need to have a number of properties, they
must: burn easily, release a lot of heat on burning, burn
without producing harmful products, be easy to handle and
burn steadily (i.e. without exploding).
Solid fuels (such as wood and coal)
Easy to handle and so safe to use but uses are limited by the
inability to flow. Also tends to burn ‘dirtily’ producing the most
pollution such as carbon dioxide, carbon monoxide and soot.
Finely powdered solid fuels can explode due to the high surface
area causing an extremely high reaction rate (see unit C10)
Liquid fuels (such as oil, ethanol, petrol)
Harder to handle as they flow (so they don’t stay in one place)
Fossil Fuels
Fossil fuels are formed from the remains of dead
animals (oil and gas) and plant (coal) that
collected over millions of years and were
transformed by heat and pressure.
Most of the energy that human society uses
comes from burning fossil fuels in power stations,
factories and motor vehicles.
There are a number of problems with fossil fuels
•They are running out quickly (especially oil)
•They release carbon dioxide when burnt leading
to global warming
Oxygen, O2
Oxygen gas has many uses:
•Medicine – helps patients
with impaired respiratory
systems to breathe.
•Welding – burns with ethyne
gas to give a super hot flame.
Reducing Pollution
It is important to reduce the pollution and
carbon dioxide that we produce. The only real
way to do this is to burn fewer fossil fuels by:
•Using less energy – by using less things that
require energy such as computers and cars that
require or using more energy efficient ones and
avoiding energy waste (leaving lights on, using
air-con with an open window etc.).
•Using cleaner energy sources – renewable
energy such as solar, wind and hydroelectric
In cars, the carbon monoxide (CO), nitrogen
oxides (NO ) and unburnt hydrocarbons (HC) that but this makes them easy to store and to feed into engines.
Gas fuels(natural gas, methane)
The hardest to handle and store requiring high pressure
canisters. Flowing means they are well suited to use in engines
and they also burn cleanly producing least pollution.
to global warming
•The soot released when they burn damages
wildlife and coats buildings in unsightly black
Pollution
Burning fuels often produces pollution in the form of
things like carbon monoxide, nitrogen oxides, un-
burnt hydrocarbons and products of impurities such as
lead and sulphur.
Carbon monoxide (CO)
Formed when fuels burn in too little oxygen. Binds
permanently to haemoglobin in your blood preventing
your blood from carrying oxygen.
Lead (Pb)
Highly toxic causing a wide range of symptoms,
including affecting the brain development of children.
Acidic Oxides
The oxides of sulphur (SO2, SO3) and nitrogen (many
including NO and NO2) are acidic which means when they
dissolve in water they form acids. These gases are
produced from burning fossil fuels, especially coal which is
high in sulphur.
When these gases dissolve in the water in clouds they
form acid rain which damages wildlife (by releasing toxic
aluminium ions) and corrodes the stonework on buildings.
NO2 is also a key component in the formation of smog
which is a major health risk in large cities.
oxides (NOX) and unburnt hydrocarbons (HC) that
they produce can be converted to less harmful
things with a catalytic converter.:
2CO + O2 � 2CO2
2NOx � N2 + xO2
2HC + 2O2 � 2CO2 + H2O
The catalytic converter is part of a car’s exhaust
pipe and uses a catalyst of platinum, rhodium or
palladium to speed up these reactions.
Green Methane
Methane gas, a good fuel can be made from
decomposing plant and animal waste (this is
often called ‘biogas’). This makes fuel from a
waste product so is environmentally better.
Hot Words
Exothermic reactions get hotter (like burning
fuels) whereas endothermic reactions get colder
(for example dissolving salt).
C15: BATTERIES
Reactivity of Metals (check Unit
The reactivity of metals can be seen by the way they react with
steam or with acid (see Unit C6 for the reactivity series).
Reaction with water (see Unit C2 for details of this reaction):
The most reactive metals (K-Ca) react with cold water, fairly
reactive metals (Mg-Fe) will only react with steam whereas the
least reactive metals (Sn-Pt) don’t react at all.
Reaction with dilute acids (see Unit C9 for details)
The reaction of metals with acids shows a similar patter with
the most reactive metals (K-Ca) reacting violently, the fairly
reactive metals (Mg-Pb) reacting gradually more slowly and the
least reactive metals (Cu-Pt) not reacting at all.
The reactivity of metals relates to how easily they form ions,
more reactive metals like K form K+ ions much more easily
Voltaic Cells
Voltaic cells produce electricity and comprise an
electrolyte solution with electrodes made of two
different metals dipping into it. The voltage of a
cell can be changed by changing the metals used
for the electrodes.
A chemical reaction takes place where the more
reactive metal forms ions forcing ions of the less
reactive metal to become atoms. This causes
electrons to flow around the circuit from the more
reactive metal to the less reactive metal. When
one of the reactants (metal or electrolyte) runs
out, the reactions stop so the cell no longer pro
The voltage of the cell is related to the position
of the two metals on the reactivity series; the
further apart they are the higher the voltage and
the closer together they are the lower the
voltage. For example a cell using of potassium
and platinum (furthest apart) would have a very
high voltage, a cell using iron and tin (close
together) would have a very low voltage.
V
Electrode
(metal 1)
Electrolyte
Solution
voltmeterElectrode
(metal 2)
Rusting
Rust (hydrated iron (III) oxide) affects most structures made of iron (or steel (see Unit C16)) and more reactive metals like K form K+ ions much more easily
than less reactive metals like Cu can form Cu+ ions.
Types of Cell
Simple Cells (Dry Cells): These are ‘normal’ batteries that can
only be used once before they go flat. The reactions that
generate the electricity are irreversible (they only go one way).
Rechargeable Cells: Like the batteries found in a your mobile
phone or a car. The reactions are can be reversed when you
put electricity back through the battery allowing you to charge
it up.
Fuel Cells: Fuel cells ‘burn’ a continuous
supply of hydrogen and oxygen to make
electricity. The gases are separated by a
special membrane that only lets hydrogen
pass through it in the form of H+ ions. This
means that when the H2 and O2 react,
energy is released as electricity instead of
heat.
Rust (hydrated iron (III) oxide) affects most structures made of iron (or steel (see Unit C16)) and
causes huge damage:
Iron + oxygen + water ���� hydrated iron (III) oxide
Rust can be prevented by taking steps making sure either oxygen or water can’t reach the iron. The
main ways to do this involve covering the metal with, paint (bridges and other structures), oil/grease
(moving machine parts) or another metal such as zinc (galvanising). Rust is also sometimes prevented
by using sacrificial prevention where a more reactive metal (Mg, Zn) is used which corrodes in
preference to the iron, this is often used to protect the hulls of ships.
When zinc and aluminium oxidise they form a waterproof layer of oxide that protects the metal from
further damage. When iron rusts, the rust flakes off exposing more iron, this is why rust is so
damaging.
Which Battery?
Dry Cells:
Dry Cells are cheap, convenient
and can store a lot of energy but
can only be used once and so are
environmentally unfriendly. They
last a long time, gradually giving
lower and lower voltage.
Rechargeable Batteries:
Can be used many times and the
ones containing lithium are light.
They are also expensive and
older versions lose their ability to
store energy after a number or
recharges. They give the same
voltage until they go flat.
Fuel Cells:
Fuel cells run on a continuous
supply of hydrogen and oxygen
so don’t run out as such. They
are very expensive and new
technology and there is little
infrastructure for producing and
distributing hydrogen gas.
C16: METALS AND ALLOYS
Metals and their Structure
Metals have a giant structure of atoms arranged in tightly
packed rows in three dimensions.
Metals are joined together
by metallic bonding in
which metal ions are
attracted to a ‘sea of
electrons’ that surrounds
them. This can happen
because the outer-shell
electrons of the metal
atoms delocalise (meaning
they are able to move
around many atoms rather
than just one) leaving
Some Commonly Used Metals and Alloys
Metal Properties
Iron Soft, magnetic, conducts
electricity
Copper Easy to shape, ductile,
excellent heat /electrical
conductor
Aluminium Low density, strong
resists corrosion
Titanium Low density, very strong,
high melting point
Gold Shiny colour, very low
reactivity, tarnish
resistant
Alloy Metals Properties
Amalgam Mercury and
Cu/Ag/Zn/Sn
Soft when formed,
rapidly hardens – used
for dental fillings
Brass Copper and
Zinc
Malleable, soft, shiny
golden colour, good
conductivity – often
used for decorative
purposes on door
handles
Solder Tin and Lead Good electrical
conductor, very low
melting point – used
to join electrical
components
Alloys With Numbers
Given the % of metal in a
mass or alloy, the amount
Steel – a very useful alloy
Iron is too soft to have many uses, but when carbon
(and sometimes a few other things) is added to make
Transition
Metals
These metals than just one) leaving
behind positive ions.
Alloys
Alloys are ‘mixtures of metals’ (although sometimes they can contain a non-metal) that are
made by mixing molten metals.
Alloys often have very different properties to the metals they are made from and by varying
the metals they can be tailored to have specific desirable properties – this is called metallurgy.
Alloys are often harder than the metals they are made from. In a pure metal the rows of
atoms are neatly lined up meaning they can slip past each easily when the metal is hit leaving
a dent. Because alloys are made of atoms of different sizes, the atoms don’t line up neatly so
can’t slip past each other so easily when hit.
Arrangement
of atoms in an
alloy
Arrangement
of atoms in a
pure metal
mass or alloy, the amount
can be found similar to
with ores (see Unit C6).
(and sometimes a few other things) is added to make
steel it becomes the most widely used metal of all.
Mild Steel (~99.75% Fe, ~0.25% C): Strong, cheap
and easy to shape – used in construction
High Carbon Steel (~99% Fe, ~1% C): Very strong but
brittle – used to make tools
Stainless Steel (80% Fe, 15% Cr, 4% Ni, 1% C):
Corrosion resistant – Cr and Ni form waterproof
oxide layer preventing further corrosion
Manganese Steel (84% Fe, 15% Mn, 1% C): Extremely
hard – used for things like railways
The Last Tests!!!!
Flame tests are used to indentify
metals in compounds by the colour
of flame they produce when burnt:
Lithium - red
Sodium - yellow
Potassium - lilac
Calcium – orangey-red
Barium – pale green
Copper – blue-green
Cu2+ – NaOH(aq) produces a blue
precipitate which dissolves in
NH3(aq)
Fe2+ - NaOH(aq) produces a dark
green precipitate insoluble in
NH3(aq)
Fe3+ - NaOH(aq) produces a brown
precipitate insoluble in NH3(aq)
Zn2+ - NaOH(aq) forms a white
precipitate soluble in NH3(aq)
These metals
have high
densities and
boiling points
and tend to
form coloured
compounds
such as the
bright blue
copper (II)
sulphate
C17: ATOMS, BONDING AND
THE PERIODIC TABLE
Electron Arrangement/Configuration
Electrons are arranged around atoms in specific shells. The
most important shell is the outer one as this controls an
atom’s chemistry. We call the electrons in the outer shell
‘valence electrons’ The number of electrons in the outer shell
is the same an element’s group number.
The number of electrons around an atom is given by the
atom’s proton number. They are arranged in shells as follows:
•1st Shell – Holds two electrons
•2nd/3rd/4th Shells – Hold 8 electrons
•Example 1: Carbon. Proton
number is 6 which means
there are 6 electrons: 2 in the
1st shell and 4 in the second
•Example 2: Chlorine. Proton
number is 17 which means
there are 17 electrons: 2 in
the 1st shell, 8 in the second
and 7 in the 3rd.
Ionic Bonding
An ionic bond is the attraction between two oppositely charged ions. Cations (positive) are formed
when atoms (usually metals) lose electrons. Anions (negative) are formed when atoms (usually non-
metals) gain electrons.
Atoms will lose or gain electrons until they have a complete outer shell: elements in Groups I, II and
III will lose 1, 2 and 3 electrons respectively to form 1+, 2+ and 3+ ions. Atoms in Groups V, VI and
VII gain 3, 2 and 1 electrons to form 3-, 2- and 1- ions. In an ionic compound the number of positive
and negative and charges must cancel out to neutral.
Example: NaF, sodium in Group I forms a 1+ ion
and fluorine in group VII forms a 1- ion so one
Na+ is needed to balance out one F-
Example: Li2O, lithium in Group I forms a 1+ ion
but oxygen in Group VI forms a 2- ion so two Li+
are needed to balance out one O2-
Li+O2-Li+Na+F-
Covalent Bonding
A covalent bond is the attraction of two atoms (usually non-metals)
Isotopes:
Isotopes are atoms with the
Checking Your Answer: To check
you are right, the period gives the
number of shells and the group gives the number of electrons
in the outer shell. For example chlorine is in Period 3 and
Group VII so it has 3 shells and 7 electrons in the outer shell.
Ions: The configuration of ions is the same as for atoms but
you have to take electrons away from positive ions and add
extra for negative ions. For example oxygen and lithium.
and 7 in the 3 .
C
Cl
Li Li+O2-O
A covalent bond is the attraction of two atoms (usually non-metals)
to a shared pair of electrons. Small groups of covalent bonded
atoms can join together to form molecules.
The atoms share enough electrons to complete their outer shells.
*Nb: In bonding diagrams you only draw the outer shell and you use
different shapes/colours to show where electrons have come from.