CHECK VALVE ACID-PROOF TYPE ZZA25 CHARACTERISTIC: Diameter - 15 -300 mm; Pressure - 25 bar (flanged may be drilled for 6, 10, 16, 40, bar) Temperature - up to 250°C for acids, bases and other aggressive media; - up to 560°C for non-toxic media; (with PTFE sealing up to 200°C); Medium - acids, liquors, water, steam and other non-toxic and non aggressive liquid and gas media, engine fuel. VERSIONS: type - body material / ends / disc and disc ring / others Example: ZZA25 / --- / --- / --- Example: ZZB25 / S / P / --- Type - body material Sign Ends Sign Disc and disc ring Sign Others Sign Standard - flanged --- Standard --- ------ --- X6CrNi18-10 or GX5CrNi19-10 ZZA25 Butt weld ends S PTFE ring P Socket weld SW NBR ring N X2CrNiMo17-12-2 or GX5CrNiMo19-11-2 ZZB25 Threaded G APPLICATION: The check valves are designed to keep pipeline safe from returning the medium. L H D z D p PTFE, NBR f g. d h 30° 60° Do D z do×n d D w DN 65 - 300 DN 15 - 50 T MAX 200°C "G" "SW" Socked Weld "S"
19
Embed
CHECK VALVE ACID-PROOF TYPE ZZA25Socket weld SW 16Mo3 or G20Mo5 U NBR ring N Threaded G 13CrMo4-5 or G17CrMo5-5 A STELLIT ring L APPLICATION: The check valve is designed to keep pipeline
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CHECK VALVE ACID-PROOFTYPE ZZA25
CHARACTERISTIC:Diameter - 15 -300 mm;Pressure - 25 bar (flanged may be drilled for 6, 10, 16, 40, bar)Temperature - up to 250°C for acids, bases and other aggressive media;
- up to 560°C for non-toxic media; (with PTFE sealing up to 200°C);Medium - acids, liquors, water, steam and other non-toxic and non aggressive liquid and
gas media, engine fuel.VERSIONS: type - body material / ends / disc and disc ring / others
Example: ZZA25 / --- / --- / ---Example: ZZB25 / S / P / ---
Type - body material Sign Ends Sign Disc and disc ring Sign Others SignStandard - flanged --- Standard --- ------ ---X6CrNi18-10
or GX5CrNi19-10 ZZA25 Butt weld ends S PTFE ring PSocket weld SW NBR ring NX2CrNiMo17-12-2
or GX5CrNiMo19-11-2 ZZB25 Threaded G
APPLICATION:The check valves are designed to keep pipeline safe from returning the medium.
L
H
Dz
Dp
PTFE, NBR
fg.
d
h
30°60°
Do
Dz
do×n
d
Dw
DN 65 - 300DN 15 - 50
TMAX 200°C "G" "SW"SockedWeld
"S"
MATERIALS:Versions ZZA25 ZZB25 ZZA25 ZZB25
Parts DN 15 - 50 DN 65 - 300
Body, bonnet X6CrNiTi18-10(1.4541)
X2CrNiMo17-12-2(1.4404)
GX5CrNi19-10(1.4308)
GX5CrNiMo19-11-2(1.4408)
Disc X6CrNiTi18-10 (1.4541)
X2CrNiMo17-12-2(1.4404)
X6CrNiTi18-10 (1.4541)
X2CrNiMo17-12-2(1.4404)
Spring X6CrNiTi18-10 (1.4541)Gasket Grafit
Special materials on request; modifications reserved.
DIMENSIONS:Standard - flanged
PN 25 , 40 PN 16 With butt weld endsDNDz Dp Do do n L g. f H h Weight Dz Dp Do do n Dz Dw Weight
TECHNICAL DATA:Maximal working pressure at working temperaturePN 20°C 100°C 150°C 200°C 250°C 300°C 350°C 400°C 450°C 480°C 500°C 510°C 520°C 530°C 540°C 550°CBody material Medium
MOUNTING AND OPERATING:The valve can only be mounted and operated by skilled, properly trained and qualified personnel.Incorrect assembly or operation of the valve may have substantial impact on the entire system suchas fluid leakage, reduction in system’s function etc.
Before a valve is installed the pipeline must be clean from any mechanical impurities. Thecompatibility of critical parameters of the flow must be checked with the parameters of the valve.Check valve can be mounted to a pipe-line in any position. The direction of flow should only complywith the arrow marked on the body. The valve should be operated strictly with its assign. In order toprovide valve’s reliability the following suggestions must be observed:
• medium flowing through the valve is supposed to be clean out of any mechanical impurities;• the valve must be protected from any mechanical damages during its work;• nominal parameters marked on the valve must be observed.
The producer reserves the rights to change the content and the form of this catalogue card without notificationPUBLISHED 01/2017 ZZA25
CHECK VALVE TYPE 292
CHARACTERISTIC:Diameter - 15 -300 mm;Pressure - 40 bar (flanges may be drilled for PN 6, 10, 16, 25 bar);Temperature - up to 560°C (with PTFE sealing up to ≤ 200°C);Medium - water, steam and other non-toxic, non aggressive liquid and gas media and
engine fuel, sea water.
VERSIONS: type / ends / body material / disc and disc ring / othersExample: 292 / --- / --- / --- / --- Example: 292 / S / U / P / WM
Ends Sign Body material Sign Disc and disc ring Sign Others Sign Standard - flanged --- (P250GH) C 22.8
or GP240GH --- Standard --- ---
Butt weld ends S PTFE ring P Sea version WM Socket weld SW 16Mo3 or G20Mo5 U NBR ring N
Threaded G 13CrMo4-5 or G17CrMo5-5
A STELLIT ring L
APPLICATION: The check valve is designed to keep pipeline safe from returning the medium.
MOUNTING AND OPERATING: The valve can only be mounted and operated by skilled, properly trained and qualified personnel. Incorrect assembly or operation of the valve may have substantial impact on the entire system such as fluid leakage, reduction in system’s function etc.
Before a valve is installed the pipeline must be clean from any mechanical impurities. The compatibility of critical parameters of the flow must be checked with the parameters of the valve. Check valve can be mounted to a pipe-line in any position. The direction of flow should only comply with the arrow marked on the body. The valve should be operated strictly with its assign. In order to provide valve’s reliability the following suggestions must be observed:
• medium flowing through the valve is supposed to be clean out of any mechanical impurities;• the valve must be protected from any mechanical damages during its work;• nominal parameters marked on the valve must be observed.
The producer reserves the rights to change the content and the form of this catalogue card without notification PUBLISHED 01/2018 292
CHECK VALVE ACID-PROOFTYPE ZZA40
CHARACTERISTIC:Diameter - 15 -300 mm;Pressure - 40 bar (flanged may be drilled for 6, 10, 16, 25, bar)Temperature - up to 250°C for acids, bases and other aggressive media;
- up to 560°C for non-toxic media; (with PTFE sealing up to 200°C);Medium - acids, liquors, water, steam and other non-toxic and non aggressive liquid and
gas media, engine fuel.VERSIONS: type - body material / ends / disc and disc ring / others
Example: ZZA40 / --- / --- / ---Example: ZZB40 / S / P / ---
Type - body material Sign Ends Sign Disc and disc ring Sign Others SignStandard - flanged --- Standard --- ------ ---X6CrNi18-10
or GX5CrNi19-10 ZZA40 Butt weld ends S PTFE ring PSocket weld SW NBR ring NX2CrNiMo17-12-2
or GX5CrNiMo19-11-2 ZZB40 Threaded G
APPLICATION:The check valves are designed to keep pipeline safe from returning the medium.
L
H
Dz
Dp
PTFE, NBR
fg.
d
h
30°60°
Do
Dz
do×n
d
Dw
DN 65 - 300DN 15 - 50
TMAX 200°C "G" "SW"SockedWeld
"S"
MATERIALS:Versions ZZA40 ZZB40 ZZA40 ZZB40
Parts DN 15 - 50 DN 65 - 300
Body, bonnet X6CrNiTi18-10(1.4541)
X2CrNiMo17-12-2(1.4404)
GX5CrNi19-10(1.4308)
GX5CrNiMo19-11-2(1.4408)
Disc X6CrNiTi18-10 (1.4541)
X2CrNiMo17-12-2(1.4404)
X6CrNiTi18-10 (1.4541)
X2CrNiMo17-12-2(1.4404)
Spring X6CrNiTi18-10 (1.4541)Gasket Grafit
Special materials on request; modifications reserved.
DIMENSIONS:Standard - flanged
PN 40 PN 16 With butt weld endsDNDz Dp Do do n L g. f H h Weight Dz Dp Do do n Dz Dw Weight
TECHNICAL DATA:Maximal working pressure at working temperaturePN 20°C 100°C 150°C 200°C 250°C 300°C 350°C 400°C 450°C 480°C 500°C 510°C 520°C 530°C 540°C 550°CBody material Medium
MOUNTING AND OPERATING:The valve can only be mounted and operated by skilled, properly trained and qualified personnel.Incorrect assembly or operation of the valve may have substantial impact on the entire system suchas fluid leakage, reduction in system’s function etc.
Before a valve is installed the pipeline must be clean from any mechanical impurities. Thecompatibility of critical parameters of the flow must be checked with the parameters of the valve.Check valve can be mounted to a pipe-line in any position. The direction of flow should only complywith the arrow marked on the body. The valve should be operated strictly with its assign. In order toprovide valve’s reliability the following suggestions must be observed:
• medium flowing through the valve is supposed to be clean out of any mechanical impurities;• the valve must be protected from any mechanical damages during its work;• nominal parameters marked on the valve must be observed.
The producer reserves the rights to change the content and the form of this catalogue card without notificationPUBLISHED 01/2017 ZZA40
Do
d
h
Dz
Dw
d
60°
30°H
Dz
f
g.
Dp
do×n
SGX15CrNiMn188
PTFE, NBR
CHECK VALVE TYPE 464
CHARACTERISTIC:Diameter - 10 -200 mm;Pressure - 100 bar;Temperature - up to 560°C (with PTFE sealing up to ≤ 200°C);Medium - water, steam and other non-toxic, non aggressive liquid and gas media and
engine fuel.
VERSIONS: type / ends / body material / disc and disc ring / othersExample: 464 / --- / --- / --- / --- Example: 464 / S / U / P / ---
Ends Sign Body material Sign Disc and disc ring Sign Others Sign Standard – flanged --- (P250GH) C 22.8
or GP240GH --- Standard --- ------ ---
Butt weld ends S PTFE ring P Socket weld SW 16Mo3 or G20Mo5 U NBR ring N Threaded G 13CrMo4-5 or G17CrMo5-5 A STELLIT ring L
APPLICATION: The check valve is designed to keep pipeline safe from returning the medium.
MOUNTING AND OPERATING: The valve can only be mounted and operated by skilled, properly trained and qualified personnel. Incorrect assembly or operation of the valve may have substantial impact on the entire system such as fluid leakage, reduction in system’s function etc.
Before a valve is installed the pipeline must be clean from any mechanical impurities. The compatibility of critical parameters of the flow must be checked with the parameters of the valve. Check valve can be mounted to a pipe-line in any position. The direction of flow should only comply with the arrow marked on the body. The valve should be operated strictly with its assign. In order to provide valve’s reliability the following suggestions must be observed:
• medium flowing through the valve is supposed to be clean out of any mechanical impurities;• the valve must be protected from any mechanical damages during its work;• nominal parameters marked on the valve must be observed.
The producer reserves the rights to change the content and the form of this catalogue card without notification PUBLISHED 01/2018 464
CHECK VALVE TYPE ZZA100
CHARACTERISTIC:Diameter - 10 -200 mm;Pressure - 100 bar;Temperature - up to 250°C for acids, bases and other aggressive media;
- up to 550°C for non-toxic media; (with PTFE sealing up to 200°C);Medium - acids, liquors, water, steam and other non-toxic and non aggressive liquid and
gas media, engine fuel.
VERSIONS: type - body material / ends / disc and disc ring / othersExample: ZZA100 / --- / --- / ---Example: ZZB100 / S / L / ---
Type - body material Sign Ends Sign Disc and disc ring Sign Others SignStandard - flanged --- Standard --- ------ ---X6CrNi18-10
or GX5CrNi19-10 ZZA100 Butt weld ends S PTFE ring PSocket weld SW NBR ring NX2CrNiMo17-12-2
or GX5CrNiMo19-11-2 ZZB100 Threaded G STELLIT ring L
APPLICATION:The check valve is designed to keep pipeline safe from returning the medium.
L
SGX15CrNiMn188
PTFE, NBR
Do
d
h
Dz
Dw
d
60°
30°HD
z
f
g.
Dp
do×n
SocketWeld
"S"
TMAX 200ºC "G" "SW
DN 10 ÷ 40 DN 50 ÷ 200
MATERIALS:Versions ZZA100 ZZB100 ZZA100 ZZB100
Parts DN 10 - 50 DN 65 - 200
Body, bonnet X6CrNiTi18-10(1.4541)
X2CrNiMo17-12-2(1.4404)
GX5CrNi19-10(1.4308)
GX5CrNiMo19-11-2(1.4408)
Disc X6CrNiTi18-10 (1.4541)
X2CrNiMo17-12-2(1.4404)
X6CrNiTi18-10 (1.4541)
X2CrNiMo17-12-2(1.4404)
Spring X6CrNiTi18-10 (1.4541)Gasket Grafit
Special materials on request; modifications reserved.
TECHNICAL DATA:Maximal working pressure at working temperaturePN 20°C 100°C 150°C 200°C 250°C 300°C 350°C 400°C 450°C 480°C 500°C 510°C 520°C 530°C 540°C 550°CBody material Medium
MOUNTING AND OPERATING:The valve can only be mounted and operated by skilled, properly trained and qualified personnel.Incorrect assembly or operation of the valve may have substantial impact on the entire systemsuch as fluid leakage, reduction in system’s function etc.
Before a valve is installed the pipeline must be clean from any mechanical impurities. Thecompatibility of critical parameters of the flow must be checked with the parameters of the valve.Check valve can be mounted to a pipe-line in any position. The direction of flow should onlycomply with the arrow marked on the body. The valve should be operated strictly with its assign. Inorder to provide valve’s reliability the following suggestions must be observed:
• medium flowing through the valve is supposed to be clean out of any mechanical impurities;• the valve must be protected from any mechanical damages during its work;• nominal parameters marked on the valve must be observed.
The producer reserves the rights to change the content and the form of this catalogue card without notificationPUBLISHED 01/2017 ZZA100
L
Dp
Dz
H
g.
d
Do
30°60°
Dw
Dz
do×n
d
h
f
CHECK VALVE TYPE 564
CHARACTERISTIC:Diameter - 15 -200 mm;Pressure - 160 bar;Temperature - up to 560°C;Medium - water, steam and other non-toxic, non aggressive liquid and gas media and
engine fuel.
VERSIONS: type / ends / body material / disc and disc ring / othersExample: 564 / --- / --- / --- / --- Example: 564 / S / U / --- / ---
Ends Sign Body material Sign Disc an d disc ring Sign Others Sign Standard – flanged --- (P250GH) C 22.8
or GP240GH --- Standard --- ------ ---
Butt weld ends S STELLIT ring L Socket weld SW 16Mo3 or G20Mo5 U Threaded G 13CrMo4-5 or G17CrMo5-5 A
APPLICATION: The check valve is designed to keep pipeline safe from returning the medium.
MOUNTING AND OPERATING: The valve can only be mounted and operated by skilled, properly trained and qualified personnel. Incorrect assembly or operation of the valve may have substantial impact on the entire system such as fluid leakage, reduction in system’s function etc.
Before a valve is installed the pipeline must be clean from any mechanical impurities. The compatibility of critical parameters of the flow must be checked with the parameters of the valve. Check valve can be mounted to a pipe-line in any position. The direction of flow should only comply with the arrow marked on the body. The valve should be operated strictly with its assign. In order to provide valve’s reliability the following suggestions must be observed:
• medium flowing through the valve is supposed to be clean out of any mechanical impurities;• the valve must be protected from any mechanical damages during its work;• nominal parameters marked on the valve must be observed.
The producer reserves the rights to change the content and the form of this catalogue card without notification PUBLISHED 01/2018 564
CHECK VALVETYPE ZZA160
CHARACTERISTIC:Diameter - 15 -200 mm;Pressure - 160 bar;Temperature - up to 250°C for acids, bases and other aggressive media;
- up to 550°C for non-toxic media; (with PTFE sealing up to 200°C);Medium - acids, liquors, water, steam and other non-toxic and non aggressive liquid and
gas media, engine fuel.
VERSIONS: type - body material / ends / disc and disc ring / othersExample: ZZA160 / --- / --- / ---
Example: ZZB160 / S / R / ---Type - body material Sign Ends Sign Disc and disc ring Sign Others Sign
Standard - flanged --- Standard --- ------ ---X6CrNi18-10or GX5CrNi19-10 ZZA160 Butt weld ends S Stellit L
Socket weld SWX2CrNiMo17-12-2or GX5CrNiMo19-11-2 ZZB160 Threaded G
APPLICATION:The check valve is designed to keep pipeline safe from returning the medium.
L
Dp
Dz
H
g.
d
Do
30°60°
Dw Dz
do×n
d
h
f
"SW"Socket Weld
"G"
"S"
DN 50 ÷ 200DN 15 ÷ 40
MATERIALS:Versions ZZA40 ZZB40 ZZA40 ZZB40
Parts DN 15 - 50 DN 65 - 300
Body, bonnet X6CrNiTi18-10(1.4541)
X2CrNiMo17-12-2(1.4404)
GX5CrNi19-10(1.4308)
GX5CrNiMo19-11-2(1.4408)
Disc X6CrNiTi18-10 (1.4541)
X2CrNiMo17-12-2(1.4404)
X6CrNiTi18-10 (1.4541)
X2CrNiMo17-12-2(1.4404)
Spring X6CrNiTi18-10 (1.4541)Gasket Grafit
Special materials on request; modifications reserved.
TECHNICAL DATA:Nominal working pressure at working temperaturePN 20°C 100°C 150°C 200°C 250°C 300°C 350°C 400°C 450°C 480°C 500°C 510°C 520°C 530°C 540°C 550°CBody material Medium
MOUNTING AND OPERATING:The valve can only be mounted and operated by skilled, properly trained and qualified personnel.Incorrect assembly or operation of the valve may have substantial impact on the entire systemsuch as fluid leakage, reduction in system’s function etc.
Before a valve is installed the pipeline must be clean from any mechanical impurities. Thecompatibility of critical parameters of the flow must be checked with the parameters of the valve.Stop globe valve can be mounted to a pipe-line in any position. The direction of flow should onlycomply with the arrow marked on the body. The valve should be operated strictly with its assign. Inorder to provide valve’s reliability the following suggestions must be observed:
• medium flowing through the valve is supposed to be clean out of any mechanical impurities;• the valve must be protected from any mechanical damages during its work;• nominal parameters marked on the valve must be observed.
The producer reserves the rights to change the content and the form of this catalogue card without notificationPUBLISHED 01/2017 ZZA160
CHECK VALVE ACID-PROOFTYPE ZZA250
CHARACTERISTIC:Diameter - 15 -125 mm;Pressure - 250 barTemperature - up to 250°C for acids, bases and other aggressive media;
- up to 560°C for non-toxic media; (with PTFE sealing up to 200°C);Medium - acids, liquors, water, steam and other non-toxic and non aggressive liquid and
gas media, engine fuel.VERSIONS: type - body material / ends / disc and disc ring / others
Example: ZZA250 / --- / --- / ---Example: ZZB250 / S / P / ---
Type - body material Sign Ends Sign Disc and disc ring Sign Others SignStandard - flanged --- Standard --- ------ ---X6CrNi18-10
or GX5CrNi19-10 ZZA250 Butt weld ends S PTFE ring PSocket weld SW NBR ring NX2CrNiMo17-12-2
or GX5CrNiMo19-11-2 ZZB250 Threaded G
APPLICATION:The check valves are designed to keep pipeline safe from returning the medium.
Lzab
Dz
g.f
Dp
doxn
Do
DwDz
Dp
L
h
30°
45°
d
H
L zab
Dp
g.f
Dz
H
Dp
Dz
Dw
L
45°
d
h
30°
DN 15 ÷ 25
"K"
"SW"Socket Weld
DN 32 ÷ 125
"K"
MATERIALS:Versions ZZA250 ZZB250 ZZA250 ZZB250
Parts DN 15 - 50 DN 65 - 125
Body, bonnet X6CrNiTi18-10(1.4541)
X2CrNiMo17-12-2(1.4404)
GX5CrNi19-10(1.4308)
GX5CrNiMo19-11-2(1.4408)
Disc X6CrNiTi18-10 (1.4541)
X2CrNiMo17-12-2(1.4404)
X6CrNiTi18-10 (1.4541)
X2CrNiMo17-12-2(1.4404)
Spring X6CrNiTi18-10 (1.4541)Gasket Grafit
Special materials on request; modifications reserved.
TECHNICAL DATA:Nominal working pressure at working temperaturePN 20°C 100°C 150°C 200°C 250°C 300°C 350°C 400°C 450°C 480°C 500°C 510°C 520°C 530°C 540°C 550°CBody material Medium
MOUNTING AND OPERATING:The valve can only be mounted and operated by skilled, properly trained and qualified personnel.Incorrect assembly or operation of the valve may have substantial impact on the entire systemsuch as fluid leakage, reduction in system’s function etc.
Before a valve is installed the pipeline must be clean from any mechanical impurities. Thecompatibility of critical parameters of the flow must be checked with the parameters of the valve.Check valve can be mounted to a pipe-line in any position. The direction of flow should onlycomply with the arrow marked on the body. The valve should be operated strictly with its assign. Inorder to provide valve’s reliability the following suggestions must be observed:
• medium flowing through the valve is supposed to be clean out of any mechanical impurities;• the valve must be protected from any mechanical damages during its work;• nominal parameters marked on the valve must be observed.
The producer reserves the rights to change the content and the form of this catalogue card without notificationPUBLISHED 01/2017 ZZA250
CHECK VALVE TYPE 481
CHARACTERISTIC:Diameter - 15 -125 mm;Pressure - 250 bar;Temperature - up to 670°C;Medium - water, steam and other non-toxic, non aggressive liquid and gas media.
VERSIONS: type / ends / body material / disc and disc ring / othersExample: 481 / --- / --- / --- / --- Example: 481 / K / U / --- / ---
Ends Sign Body material Sign Disc and disc ring Sign Others Sign Standard-butt weld ends --- (P250GH) C 22.8 --- Standard --- ------ --- Socket weld SW 16Mo3 U Stellit ring L Flange by DIN or ANSI, K 13CrMo4-5 A
11CrMo9-10 B 14MoV6-3 C X10CrMoVNb9 -1 E
APPLICATION: The check valve is designed to keep pipeline safe from returning the medium.
Seat ring BT9 or G 18 8 Mn (1.4370) or Stellit Disc X20Cr13 (1.4021) , P245GH (1.0352) X10CrMoVNb9-1 Disc ring G 18 8 Mn (1.4370) or Stellit Spring 51CrV4 (1.2241) Gasket Grafit + austenite Bonnet DN > 32 P265GH (1.0425)
Special materials on request; modifications reserved.
MOUNTING AND OPERATING: The valve can only be mounted and operated by skilled, properly trained and qualified personnel. Incorrect assembly or operation of the valve may have substantial impact on the entire system such as fluid leakage, reduction in system’s function etc.
Before a valve is installed the pipeline must be clean from any mechanical impurities. The compatibility of critical parameters of the flow must be checked with the parameters of the valve. Stop globe valve can be mounted to a pipe-line in any position. The direction of flow should only comply with the arrow marked on the body. The valve should be operated strictly with its assign. In order to provide valve’s reliability the following suggestions must be observed:
• medium flowing through the valve is supposed to be clean out of any mechanical impurities;• the valve must be protected from any mechanical damages during its work;• nominal parameters marked on the valve must be observed.
The producer reserves the rights to change the content and the form of this catalogue card without notification PUBLISHED 01/2017 481
DOSAPACK® PD
Non-contractual document. Dimensions and technical data subject to change without prior notice.
The
info
rmat
ion
cont
aine
d in
this
doc
umen
t is
the
prop
erty
of S
DM
-Sis
tem
as fo
r whi
ch n
o lia
bilit
y will
be
impl
ied.
APPLICATIONSThe DOSAPACK PD equipment can be used for dosing any reactive liquid:
Reagents used in water treatment
Coagulants
pH reducers
Conditioning reagents
Other types of reagents for industrial applications
Reagents for treatment of water in boilers
Reagents for treatment of cooling towers
Correct dosing ensures accuracy in the quantities added of reagents, thus optimising the use of the same.
Dispensation of reagents in the plant is a very important process with influence on the correct operation of the same.
A pre-installed dosing system provides:
Necessary elements to ensure correct operationof the dosing pumps.
Adequate disposition and assembly of theelements in accordance with the required serviceconditions.
Easy launch of the reagent dosing at the plant.
Protection of the dosing pumps and componentsfrom adverse weather conditions.
THE CORRECT DOSING OF REACTIVES REQUIRES A DISPENSING SYSTEM
trusted. worldwide. 00|00
Klinger Portugal, Lda.Via José Régio, 36
Centro Empresarial Vilar do Pinheiro4485-860 Vila do Conde