EN EN • 3 X CHARGING 1. Connect the charger to the battery. 2. Connect the charger to the wall socket. The error lamp will indicate if the battery clamps are incorrectly connected. The reverse polarity protection will ensure that the battery or charger will not be damaged. 3. Follow the indication lamps through the charging process. The battery is fully charged when is lit. 4. Stop charging at any time by disconnecting the mains cable from the wall socket. CONGRATULATIONS to the purchase of your new professional switch mode battery charger. This charger is included in a series of professional chargers from CTEK SWEDEN AB and represents the latest technology in battery charging. CTEK COMFORT CONNECT – eyelet M6 6V/0.8A XC 0.8 CTEK COMFORT CONNECT MAINS CABLE DESULPHATION BULK ABSORPTION FULLY CHARGED PULSE, MAINTENANCE CHARGING CTEK COMFORT CONNECT – clamp CHARGE CABLE SUPPLY PLUG* *Supply plugs may differ to suit your wall socket. MANUAL ERROR LAMP 20015436F XC 0.8, Manual EU, Print file 002.indd 3 2011-06-29 15:13:54
5
Embed
MaNUaL Chargers/cteck/psd/xc 0.8-56729/XC 0.8_EN.pdf · cONgraTULaTiONS to the purchase of your new professional switch mode battery charger. This charger is included in a series
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
CTEKSWEDENAB,issuesthislimitedwarrantytotheoriginalpurchaserof thisproduct.This limitedwarrantyisnottransferable.Thewarrantyappliesto manufacturing faults and material defects for5 years from thedateof purchase. The customermustreturntheproducttogetherwiththereceiptofpurchase to the point of purchase. This warrantyis void if the battery charger has been opened,
handled carelessly or repaired by anyone otherthan CTEKSWEDENAB or its authorised repre-sentatives. CTEKSWEDENAB makes no war-ranty other than this limited warranty and is notliable for any costs other than those mentionedabove,i.e.noconsequentialdamages.Moreover,CTEKSWEDENAB is not obligated to any war-rantyotherthanthiswarranty.
SaFETY• The charger isdesignedforcharging6Vlead-acidbatteries.Donotusethecharger
foranyotherpurpose.• check the chargercablespriortouse.Ensurethatnocrackshaveoccurredinthe
cablesorinthebendprotection.Achargerwithdamagedcablesmustbescrapped.• Never chargeadamagedbattery.• Never chargeafrozenbattery.• Never placethechargerontopofthebatterywhencharging.• always provideforproperventilationduringcharging.• avoid coveringthecharger.• a battery beingchargedcouldemitexplosivegasses.Preventsparksclosetothe
battery.Whenbatteriesarereachingtheendoftheirlifecycleinternalsparksmayoccur.• all batteries failsoonerorlater.Abatterythatfailsduringchargingisnormally
• This appliance isnotdesignedforusebyyoungchildrenorpeoplewhocannotreadorunderstandthemanualunlesstheyareunderthesupervisionofaresponsiblepersontoensurethattheycanusethebatterychargersafely.Storeandusethebatterychargeroutofthereachofchildren,andensurethatchildrencannotplaywiththecharger.
INFO If the battery clamps are incor-rectly connected, the reverse polarity protection will ensure that the battery and charger are not damaged.For batteries mounted inside a vehicle 1. Connect the red clamp to the bat-tery's positive pole.2. Connect the black clamp to the vehicle chassis remote from the fuel pipe and the battery.3. Connect the charger to the wall socket 4. Disconnect the charger from the wall socket before disconnecting the battery5. Disconnect the black clamp before the red clamp.
Some vehicles may have posi-tively earthed batteries. 1. Connect the black clamp to the bat-tery's negative pole.2. Connect the red clamp to the vehicle chassis remote from the fuel pipe and the battery.3. Connect the charger to the wall socket 4. Disconnect the charger from the wall socket before disconnecting the battery5. Disconnect the red clamp before the black clamp.