Characteristic Safety Values for MOVIFIT® FC/MC with S12 ... · 1.1.1Overall component: S12 safety option The tables below show the safety characteristics of the overall component.

*23044128_0816*Drive Technology \ Drive Automation \ System Integration \ Services

Data Sheet

Functional SafetyCharacteristic Safety Values for MOVIFIT® FC/MC with S12Safety Option

Edition 08/2016 23044128/EN

1 Data SheetSafety characteristic values MOVIFIT® FC/MC with S12 safety option

Data Sheet – Characteristic Safety Values for MOVIFIT® FC/MC with S12 Safety Option2

1 Data Sheet

INFORMATIONThis data sheet does not replace the following documents1) :• "MOVIFIT® FC" operating instructions• "MOVIFIT® MC" operating instructions• "MOVIFIT® FC/MC – Functional Safety with S12 Safety Option" manual

1) We reserve the right to make technical changes

1.1 Safety characteristic values MOVIFIT® FC/MC with S12 safety optionSafetycharacteristic valuesMOVIFIT®FC/MC withS12 safetyoption

1.1.1 Overall component: S12 safety optionThe tables below show the safety characteristics of the overall component.

Designation Characteristic safety values according toIEC 62061 / IEC

61508EN ISO 13849-1

Classification SIL 21) PL d

System structure HFT = 0 Category 2

Operating mode selection High demand –

Probability of dangerous failure perhour(PFHd value)

< 1.5 x 10-8 1/h < 1.5 x 10-8 1/h

Mission time / service life 20 years

Proof test interval Not required –

Safe state • PROFIsafe: Logic value "0" for all safety-related process values

• Safety-related F-DO outputs: Outputs de-activated (logic "0")2)

Safety functions • STO, SS1, SLS, SDI (according toEN 61800-5-2)

• Safety-related digital inputs and outputs• PROFIsafe communication

1) The S12 safety option is a subsystem of type B according to IEC 61508.2) When a safety-related output is used to control the STO function of the inverter, the function is activated

in a safe state.

2304

4128

/EN

– 0

8/20

16

1Data SheetSafety characteristic values MOVIFIT® FC/MC with S12 safety option

Data Sheet – Characteristic Safety Values for MOVIFIT® FC/MC with S12 Safety Option 3

1.1.2 Extended safety class for safety-related digital inputs and outputsThe following tables show the safety characteristics for safety-related digital inputsand outputs.

Designation Characteristic safety values according toIEC 62061 / IEC

61508EN ISO 13849-1

• Safety-related inputs• Safety-related outputs (sourcing/

sinking)• PROFIsafe

Classification SIL 3 PL e

System structure HFT = 1 2 channels(corresponds to cat-

egory 3)

Probability of dangerous failure perhour(PFHd value)

< 1 x 10-9 1/h < 1 x 10-9 1/h

Designation Characteristic safety values according toIEC 62061 / IEC

61508EN ISO 13849-1

• Safety-related outputs (sourcing/sinking)

• PROFIsafe

Classification SIL 3 PL e

System structure HFT = 1 2 channels(corresponds to cat-

egory 3)

Probability of dangerous failure perhour(PFHd value)

< 4 x 10-9 1/h < 4 x 10-9 1/h

2304

4128

/EN

– 0

8/20

16

SEW-EURODRIVE—Driving the world

SEW-EURODRIVE GmbH & Co KGP.O. Box 302376642 BRUCHSALGERMANYPhone +49 7251 75-0Fax +49 7251 [email protected]