CHAPTER 8 CHAPTER 8 NETWORKS 1: NETWORKS 1: 0909201-01 0909201-01 11 December 2002 – Lecture 8b ROWAN UNIVERSITY ROWAN UNIVERSITY College of Engineering College of Engineering Professor Peter Mark Jansson, PP PE Professor Peter Mark Jansson, PP PE DEPARTMENT OF ELECTRICAL & COMPUTER ENGINEERING DEPARTMENT OF ELECTRICAL & COMPUTER ENGINEERING Autumn Semester 2002 Autumn Semester 2002
CHAPTER 8. NETWORKS 1: 0909201-01 11 December 2002 – Lecture 8b ROWAN UNIVERSITY College of Engineering Professor Peter Mark Jansson, PP PE DEPARTMENT OF ELECTRICAL & COMPUTER ENGINEERING Autumn Semester 2002. admin. hw 7 due today, hw 8 due at final - PowerPoint PPT Presentation
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Professor Peter Mark Jansson, PP PEProfessor Peter Mark Jansson, PP PEDEPARTMENT OF ELECTRICAL & COMPUTER ENGINEERINGDEPARTMENT OF ELECTRICAL & COMPUTER ENGINEERING
Autumn Semester 2002Autumn Semester 2002
admin
hw 7 due today, hw 8 due at final hw 8 posted end of today last lab 6 due by end of day monday final exam: Next Wed 18 Dec 10:15am take – home portion
Pick up at end of day from office window Yellow and Blue folders (by Lab Section)
networks I
Today’s learning objectives – understand first order circuits build your knowledge of the concept of
complete response learn how Thevenin and Norton equivalents
help simplify analysis of first order circuits learn how to calculate the natural
(transient) response and forced (steady-state) response
new concepts from ch. 8
response of first-order circuits to a constant input
the complete response stability of first order circuits response of first-order circuits to a nonconstant (sinusoidal) source
What does First Order mean?
circuits that contain capacitors and inductors can be defined by differential equations circuits with ONLY ONE capacitor OR ONLY ONE inductor can be defined by a first order differential equation such circuits are called First Order Circuits
complete response?
Complete response = transient response + steady state response
For circuits we will review today: both – constant source p.315 and sinusoidal source p. 304…
1) Find the forced response before the disturbance. Evaluate at t = t(0-) to determine initial conditions
2) Find forced response (steady state) after the disturbance t= t(0+)
3) Add the natural response (Ke-t/) to the new forced response. Use initial conditions to calculate K
simplifying for analysis
Using Thevenin and Norton Equivalent circuits can greatly simplify the analysis of first order circuits We use a Thevenin with a Capacitor and a Norton with an Inductor
Thevenin Equivalent at t=0+
Rt
C+–
Voc
+v(t)-
i(t)
+ -
Norton equivalent at t=0+
RtIsc
+v(t)-
L i(t)
1st ORDER CIRCUITS WITH CONSTANT INPUT
+–
t = 0
R1 R2
R3 Cvs
+v(t)-
s321
3 vRRR
R0v
Example (before switch closes)
If vs = 4V, R1 = 20kohms,
R2 = 20 kohms R3 = 40 kohms
What is v(0-) ?
s321
3 vRRR
R0v
as the switch closes…
THREE PERIODS emerge….. 1. system change (switch closure) 2. (immediately after) capacitor or inductor in system will store / release energy (adjust and/or oscillate) as system moves its new level of steady state (a.k.a. transient or natural response) …. WHY??? 3. new steady state is then achieved (a.k.a. the forced response)