Chapter 4 Chemical Reactions - chemistryinthecity.org...Chemical Reactions. Working with Solutions Molar Concentration Define molarityor molar concentrationof a solution. Calculate
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Molar ConcentrationDefine molarity or molar concentration of a solution.Calculate molarity from mass and volume.Use molarity as a conversion factor.
Diluting SolutionsDescribe what happens to the concentration of a solution when it is diluted.Perform the calculations associated with dilution.Describe the process for diluting a solution.
• Solubility rules tell us when to expect a precipitate, but not how much remains dissolved in solution
• Can solute precipitate or dissolve just by heating/cooling?
Practice
Describe what happens when the following solutions are prepared in the following scenarios:
• 25 g potassium nitrate mixed with 100 g of water, then placed into the refrigerator (5 degrees C)
• 60 g sodium sulfate mixed with 100 g of water, then heated to 65 degrees C
• A 65 wt% solution of lead (II) nitrate prepared one hot summer day. That next week, the air conditioning was turned on. The solution got cloudy.
Solutions
• Solutions are homogeneous mixtures of two or more substances.
• The solvent is the substance in greatest quantity.
• Solutes are dissolved in the solvent
Unsaturated/Saturated/Supersaturated Solutions• An unsaturated solution does not contain as much
solute as it can dissolve.
• A saturated solution contains the maximum concentration of solute that can dissolve in it.
• A supersaturated solution contains more than the quantity of a solute that is predicted to be soluble in a given volume of solution at a given temperature.
Supersaturated Solution
Expressions of Concentration
• Percent by mass =
• Percent by volume =
• Molarity =
• Parts per million (ppm) =
´mass of solute 100%
mass of solution
´volume of solute 100%
volume of solution
moles of soluteL of solution
´ 6g of solute 10 ppmg of solution
Practice CalculationsIf there's 0.000575 g of NaCl dissolved in 975 g of water, what is the concentration in parts per million?
0.500 moles of hydrochloric acid are dissolved in 2 liters of water. Calculate the molarity of this solution.
If there's 6.24 x 10-6 g of PbSO4
dissolved in 1 liter of water, what is the concentration in parts per billion?
The EPA has set a standard of 10 ppb for arsenic in drinking water. A certain sample of water contains ow many grams of arsenic 0.00025 g of arsenic in a sample of water that's 100 mL. Is this concentration above or below the acceptable level?
If the molarity of a solution is 0.15 M, what is the pH? Is this solution acidic or basic?
Molar Concentration, Molarity, (M)Moles of solute per liter of solution
Which of the following three solutions has the highestconcentration?
1.5 10-3 M NaOH
2.25 10-6 M H2SO4
9.1 10-12 M HCl
Diluting SolutionsPreparing a solution with specific concentration requires diluting it with a certain volume of water. This requires knowledge of the relationship between the molarity of the solution before and after dilution.
Gravimetric AnalysisIt is a type of quantitative analysis in which the amount of a species in a material is determined by converting the species to a product that can be isolated completely and weighed.
A 1.000-L sample of polluted water was analyzed for lead (II) ion, Pb2+, by adding an excess of sodium sulfate to it. The mass of lead (II) sulfate that precipitated was 229.8 mg. What is the mass of lead in a liter of water? Give the answer as milligrams of lead per liter of solution.
A flask contains an unknown amount of HCl. This solution is titrated with 0.207 M NaOH. It takes 4.47 mL of the NaOH solution to complete the reaction. Determine the mass of HCl.
4 | 21
Determine the stoichiometry of the reaction by writing the balanced equation.
Determining the mass of HCl:
– 3 0.207 mol NaOH 1 mol HCl 36.5 HCl4.47 10 L NaOH soln = 0.0338 g HCl1 L NaOH soln 1 mol NaOH 1 mol HCl
• Concentration of reactant A in buret is known accurately• Concentration of reactant B in flask is not known• Add a special pH indicator to reactant B in the flask• Add reactant A to reactant B until the pH indicator changes
color
Practice
What is the concentration of sulfuric acid if 15.00 ml of it react with 18.45 mL of a 0.0973 M NaOH solution?
standard solution
unknown solution
end point equivalence point
pH indicator
stoichiometric analysis
Practice
What is the concentration of sulfuric acid if 15.00 ml of it react with 18.45 mL of a 0.0973 M NaOH solution?