Chapter 25 Current, Resistance, Electromotive Force • Consider current and current density • Study the intrinsic property of resistivity • Use Ohm’s Law and study resistance and resistors • Connect circuits and find emf • Examine circuits and determine the energy and power in them • Describe the conduction of metals microscopically, on an atomic scale 1
26
Embed
Chapter 25 Current, Resistance, Electromotive Force Consider current and current density Study the intrinsic property of resistivity Use Ohm’s Law and.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Chapter 25Current, Resistance, Electromotive Force
• Consider current and current density
• Study the intrinsic property of resistivity
• Use Ohm’s Law and study resistance and resistors
• Connect circuits and find emf
• Examine circuits and determine the energy and power in them
• Describe the conduction of metals microscopically, on an atomic scale
1
The direction of current flow– In the absence of an external field, electrons move randomly in
a conductor. If a field exists near the conductor, its force on the electron imposes a drift.
-The electrons move at a random velocity and collide with stationary ions. Velocity in the order of 106 m/s
-Drift velocity is approximately 10-4 m/s
Current flowing– Positive charges would move with the electric field, electrons move in
opposition.– The motion of electrons in a wire is analogous to water coursing
through a river.
Chapter 25 4
Electric Current
Conventional Current Direction
Electrical current (I) in amperes is defined as the rate of electric charge flow in coulombs per second. 1 ampere (A) of current is a rate of charge flow of 1 coulomb/second.
dt
dQI (25-1)
1 mA (milliampere) = 1 x 10-3 A (ampere)
1 A(microampere) = 1 x 10-6 A (ampere)
Chapter 25 5
Electric Current Density
AdtnqvdtnAvqdQ dd )(
where n = charge carriers per unit volume q = charge per charge carrier in coulombs vd = average drift velocity of charge carriers in meters per second
Current, Drift Velocity, and Current Density
A
IJ = current density in amperes/m2
InqAvdt
dQd dnqAv
dt
dQI amperes
Chapter 25 6
Resistivity
Evd
where = mobility of conducting material
Drift Velocity is 1010 slower than Random Velocity
1 1 E
nq J
nqwhere conductivity of the material.
EEnqvnqJ d
Definition of resistivity in ohm-meters (-m).
Drift Velocity
E
J
Resistivity of the material.
Resistivity is intrinsic to a metal sample (like density is)
Resistivity and Temperature
• In metals, increasing temperature increases ion vibration amplitudes, increasing collisions and reducing current flow. This produces a positive temperature coefficient.
• In semiconductors, increasing temperature “shakes loose” more electrons, increasing mobility and increasing current flow. This produces a negative temperature coefficient.
• Superconductors, behave like metals until a phase transition temperature is reached. At lower temperatures R=0.
9
Resistance DefinedEEJ
1
EJ1
A
IJ
L
VE
L
V
A
I
1
( )I L
V L I RIA A
Ohm’s Law
where R is the resistance of the material in ohms ()
for a uniform E
+
–
V RItherefore
Solve for V
Ohm’s law an idealized model• If current density J is nearly proportional to electric field E
ratio E/J = constant and Ohm’s law applies V = I R
• Ohm’s Law is linear, but current flow through other devices may not be.
Linear Nonlinear Nonlinear
VR
I1
R
Slope1
RIV Ohm’s law applies
Resistors are color-coded for assembly work
Examples:Brown-Black-Red-Gold = 1000 ohms +5% to -5%Yellow-Violet-Orange-Silver = 47000 ohms +10% to -10%
Electromotive force and circuits
If an electric field is produced in a conductor without a complete circuit, current flows for only a very short time.
An external source is needed to produce a net electric field in a conductor. This source is an electromotive force, emf , “ee-em-eff”, (1V = 1 J/C)
Ideal diagrams of “open” and “complete” circuits
Symbols for circuit diagrams– Shorthand symbols are in use for all wiring components
15
Electromotive Force and Circuits
Electromotive Force (EMF)
EMF R
Ideal source of electrical energy
I
+
–
+VR
–
Ideal Source
Complete path needed forcurrent (I) to flow
Voltage rise in current direction
Voltage drop in current direction
Real Source
EMF
rs
R
+
–
a
b
Vab
+
–
I
Real source of electrical energy
Internal source resistance
VR = EMF = R I
R
EMF
R
VI R
External resistance
IRIrEMFV sab
Chapter 25 16
A Source with an Open Circuit
Example 25-5
VrVIrEMFVab 12012
Figure 25-16
I = 0 amps
17
A source in a complete circuitExample 25-6
Figure 25-17
IRIrVab
)( rRIIrIR
ArR
I 224
12
VIrVab 8)2(212 VIRVV baab 8)4(2''
Chapter 25 18
A Source with a Short CircuitExample 25-8
Figure 25-19
0)0( IIRIrVab 0 Ir
AV
rI 6
2
12
Ir
0abV
I = 6 A
19
Potential Rises and Drops in a Circuit
Figure 25-21
20
Energy and Power
dt
dQI
IdtdQ
dQ
dWV abab
dQVdW abab
IdtVdW abab
IVdt
dWP ab
ab watts
1 watt = 1 joule/sec
Pure Resistance
dt
dWP ab
Substitute for IdtdQ
Defined
Divide by dt
Chapter 25 21
Power Output of an EMF Source
EMF
rs
R
I
+
––
+
Vab
a
b
IRIrEMFV sab
RIrIIEMFIIrEMFIVP ssabab22)()(
Power dissipated in battery resistancePower supplied by the battery
Power dissipated in R
RIrIIEMF s22)(
+ –
Power output of battery
22
Power Input to a SourceI
sab IrEMFV
ssabab rIIEMFIIrEMFIVP 2)()(
Power dissipated in battery resistancePower charging the battery
sab rIIEMFIV 2)(
a
b
Total Power input to battery
Vab greater then the EMF of the battery+
–
+–+
–
23
Power Input and Output in a Complete CircuitExample 25-9
Figure 25-25
24
Power in a Short Circuit
Example 25-11
Theory of Metallic Conduction
• Simple, non-quantum-mechanical model
• Each atom in a metal crystal gives up one or more electrons that are free to move in the crystal.
• The electrons move at a random velocity and collide with stationary ions. Velocity in the order of 106 m/s (drift velocity is approximately 10-4 m/s)
• The average time between collisions is the mean free time, τ.
• As temperature increases the ions vibrate more and produce more collisions, reducing τ.
Chapter 25 25
A microscopic look at conduction
– Consider Figure 25.27.– Consider Figure 25.28.– Follow Example 25.12.