Introduction to Theory of Machines and Mechanisms Inés Peñuelas Sánchez [email protected]Alberto Higuera Garrido [email protected]José Manuel Sierra Velasco [email protected]Dpto. de Construcción e Ingeniería de Fabricación CHAPTER 1 Ingeniería Mecánica Lesson 1: 1. Introduction 2. Requirements 3. Major topics in the course 4. Bibliography and references 5. Methodology 6. Evaluation 7. Rules of the course CONTENTS 2 Introduction to Theory of Machines and Mechanisms
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
� The attitude during practices shall be taken into account.
� Attending to the practice with the script is mandatory.
� No practice will be evaluated without attending to it.
� The practices undertaken with computer, will be sent via the uniovi e-mail to the professor during the last ten minutes of the practice.
� Those e-mails subsequently sent will not be accepted.
Intr
oduc
tion
to T
heor
y of
Mac
hine
s an
d M
echa
nism
s
20
6. Evaluation
Intr
oduc
tion
to T
heor
y of
Mac
hine
s an
d M
echa
nism
s
ORDINARY ASSESSMENT
21
� 80% will correspond to the grade on the written examination.
It is necessary to obtain a final grade of 5 to pass the subject. However a minimum of 4 points is required on the written examination.
� 10% will correspond to the grade on the classroom practices.
� 10% will correspond to the grade on the laboratory practices.
EVALUATION
EXTRAORDINARY ASSESSMENT
� 100% will correspond to the grade on the written examination.
� It could be included questions dealing practical skills.
It is necessary to obtain a final grade of 5 to pass the subject.
Intr
oduc
tion
to T
heor
y of
Mac
hine
s an
d M
echa
nism
s
22
7. Rules of the course
Intr
oduc
tion
to T
heor
y of
Mac
hine
s an
d M
echa
nism
s
MUY IMPORTANTE
23RULES OF THE COURSE
� El examen final debe resultar legible, debe expresar las unidadescorrectas y debe recoger con claridad los pasos seguidos y elorigen de aquellos cálculos parciales que se empleen en suresolución.
� Con carácter general no se resolverán dudas por medio del correoelectrónico y el alumno deberá ser diligente y responsable en eluso de este medio de comunicación.
� Es obligación del alumno atender al correo electrónico universitarioy al campus virtual, entendiendo el alumno que ambos son canalesde comunicación válidos y suficientes.