CHANNEL TRAY SYSTEM - Ocean-1 · 2015. 1. 3. · 2400 = 24 ” 4 Tray Type C ... CIVE Vertical Inside CHT Horizontal Tee CHX Horizontal Cross 5 Cover Type C Cover. Marine Channel

CHANNEL TRAY SYSTEM

©2012 OCEAN-1 MARINE PRODUCTS, LTD.

2

35

46

67

Section Page

Marine Channel

Flatbar Ladder Tray

C-Rail Leg-In Ladder Tray

I-Beam Ladder Tray

MARINE & OFFSHORE CABLE TRAY SYSTEMS


Important notice: "The information contained within this catalog is for ILLUSTRATION PURPOSES ONLY. Product and usespecifications and engineering data are not provided in this catalog, but are available upon request. Product application and fitnessfor particular purpose is determined solely by the customer and its engineering department and consultants. All product designs,dimensions, specifications, tolerances, performance, and similar characteristics are subject to change without notice."

- 2 -

2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com ©2012 OCEAN-1 MARINE PRODUCTS, LTD.

Available in the following material finishes:Aluminum

Hot Dipped GalvanizedStainless Steel

Marine Channel

1-1/4”

2”

3”

Marine Channel

- 3 -

2121 Brittmoore Road, Ste. 5000 • Houston, TX 77043 • Office: 713.460.0649 • Fax: [email protected] • www.ocean-1.com

1-1/4”


Channel Tray Part Numbering SystemExample Part No.: O1-HG600C125

O1-HG 600 C 125

1 2 3 4 5

1 Product CodeO1 Ocean-1

2 Material/FinishAL AluminumHG Hot Dipped GalvanizedSS 316 Stainless Steel

3 Width300 = 3”400 = 4”600 = 6”800 = 8”900 = 9”

1000 = 10”1200 = 12”1800 = 18”2400 = 24”

4 Tray TypeC Channel

5 Depth125 = 1-1/4”

- 4 -


Marine Channel

Straight Section1-1/4” Deep

Example Part No.: O1-HG600C125

Features:1. Return flange offers a protective edge for cable roll-out and

a stronger channel.2. Perforations accept 5/8” coated band for securing cables.3. Straight sections supplied in 10’ lengths.

End View

1-1/

4”


Marine Channel

- 5 -


1-1/4”


Channel Tray Cover Part Numbering SystemExample Part No.: O1-SS600CFCC

O1-SS 600 C FCC

1 2 3 4 5


2 Material/FinishAL AluminumPG Pre-GalvanizedSS 316 Stainless Steel

3 Width300 = 3”400 = 4”600 = 6”800 = 8”900 = 9”

1000 = 10”1200 = 12”1800 = 18”2400 = 24”


5 Cover TypeFCC Flat Flanged Closed Cover

Cover

Note:Supplied in 10’ lengths

- 6 -


Marine Channel

DEPTH

WIDTH

End View

1-1/

4”


Cover Clamp Part Numbering SystemExample Part No.: O1-SS601CCC

O1-SS 601 C CC

2 3 4 5 61



3 Width30 = 3”40 = 4”60 = 6”80 = 8”90 = 9”

100 = 10”120 = 12”180 = 18”240 = 24”


6 Accessory TypeCC Cover Clamp

4 Depth1 = 1-1/4”

Note:Includes Hardware

Marine Channel

- 7 -


1-1/4”


Channel Tray Fitting Part Numbering SystemExample Part No.: O1-HG601CHE

O1-HG 601 CHE

1 2 3 4 5



3 Width30 = 3”40 = 4”60 = 6”80 = 8”90 = 9”

100 = 10”120 = 12”180 = 18”240 = 24”

5 Fitting TypeCHE Horizontal ElbowCHE-ADJ Adjustable Horizontal ElbowCOVE Vertical OutsideCIVE Vertical InsideCHT Horizontal TeeCHX Horizontal Cross

4 Depth1 = 1-1/4”


a stronger fitting.2. Perforations accept 5/8” coated band for securing cables.3. Fittings include built in splice connection.4. All fittings include hardware.

- 8 -


Marine Channel

Example Part No.: O1-SS601CHECHE 90° Horizontal Elbow

CHE

CHE-ADJ

Example Part No.: O1-SS601CHE-ADJCHE-ADJ Adjustable Horizontal Elbow

CHT

Example Part No.: O1-SS601CHTCHT Horizontal Tee

1-1/

4”


Marine Channel

- 9 -


1-1/4”


Example Part No.: O1-SS601COVECOVE Vertical Outside

Feature: Adjustable

COVE

CIVE

Example Part No.: O1-SS601CIVECIVE Vertical Inside

Feature: Adjustable

- 10 -


Marine Channel1-

1/4”


Channel Tray Fitting Cover Part Numbering SystemExample Part No.: O1-SS600CHE-C

O1-SS 600 CHE-C

1 2 3 4 5



3 Width300 = 3”400 = 4”600 = 6”800 = 8”900 = 9”

1000 = 10”1200 = 12”1800 = 18”2400 = 24”

4 Fitting TypeCHE Horizontal ElbowCOVE Vertical OutsideCIVE Vertical InsideCHT Horizontal TeeCHX Horizontal Cross

5 Cover TypeC Cover

Marine Channel

- 11 -


1-1/4”


Splice Plate Part Numbering SystemExample Part No.: O1-HG-125-CN

O1-HG-125-CN

2 3 41



4 Accessory TypeCN Connector

3 Depth125 = 1-1/4”

Notes:1. Sold in pairs2. Includes hardware

- 12 -


Marine Channel1-

1/4”


Horizontal Adjustable Plate Part Numbering SystemExample Part No.: O1-SS600CHAP

O1-SS 600 C HAP

1 2 3 4 5


2 Material/FinishAL AluminumPG Pre-GalvanizedHG Hot Dipped GalvanizedSS 316 Stainless Steel

3 Width300 = 3”400 = 4”600 = 6”800 = 8”900 = 9”

1000 = 10”1200 = 12”1800 = 18”2400 = 24”

5 Accessory TypeHAP Horizontal Adjustable Plate


Notes:Includes hardware

Marine Channel

- 13 -


1-1/4”


Vertical Adjustable Plate Part Numbering SystemExample Part No.: O1-SS600CVAP



3 Width300 = 3”400 = 4”600 = 6”800 = 8”900 = 9”

1000 = 10”1200 = 12”1800 = 18”2400 = 24”

5 Accessory TypeVAP Vertictal Adjustable Plate



O1-SS 600 C VAP

1 2 3 4 5

2”

- 14 -


Marine Channel



O1-HG 600 C 200

1 2 3 4 5



3 Width300 = 3”400 = 4”600 = 6”800 = 8”900 = 9”

1000 = 10”1200 = 12”1800 = 18”2400 = 24”


5 Depth200 = 2”

Marine Channel

- 15 -


2”


2.0”

WIDTH

Straight Section2” Deep


Features:1. Return flange offers a protective edge for cable roll-out.2. Perforations accept 5/8” coated band for securing cables.3. Straight sections supplied in 10' lengths.

End View



3 Width300 = 3”400 = 4”600 = 6”800 = 8”900 = 9”

1000 = 10”1200 = 12”1800 = 18”2400 = 24”



End View


O1-SS 600 C FCC

2 3 4 51


- 16 -


Marine Channel2”


Marine Channel

- 17 -


2”


End View


O1-SS 602 C CC

2 3 4 5 61



3 Width30 = 3”40 = 4”60 = 6”80 = 8”90 = 9”

100 = 10120 = 12”180 = 18”240 = 24”



4 Depth2 = 2”

Note:Includes hardware

- 18 -


Marine Channel2”


Channel Tray Fitting Part Numbering SystemExample Part No.: O1-HG602CHE

O1-HG 602 CHE

1 2 3 4 5



3 Width30 = 3”40 = 4”60 = 6”80 = 8”90 = 9”

100 = 10”120 = 12”180 = 18”240 = 24”

5 Fitting TypeCHE Horizontal ElbowCHE-ADJ Adjustable Horizontal ElbowCOVE Vertical OutsideCIVE Vertical InsideCHT Horizontal TeeCHX Horizontal Cross

4 Depth2 = 2”


a stronger fitting.2. Perforations accept 5/8” coated band for securing cables.3. Fittings include built in splice connection.4. All fittings include hardware.

Marine Channel

- 19 -


2”


CHE

CHE-ADJ

CHT

Example Part No.: O1-SS602CHECHE 90° Horizontal Elbow

Example Part No.: O1-SS602CHE-ADJCHE-ADJ Adjustable Horizontal Elbow


- 20 -


Marine Channel2”


Example Part No.: O1-SS602COVECOVE Vertical Outside

Feature: Adjustable

COVE

CIVE

Example Part No.: O1-SS602CIVECIVE Vertical Inside

Feature: Adjustable

Marine Channel

- 21 -


2”



O1-SS 600 CHE-C

1 2 3 4 5



3 Width300 = 3”400 = 4”600 = 6”800 = 8”900 = 9”

1000 = 10”1200 = 12”1800 = 18”2400 = 24”

4 Fitting TypeCHE Horizontal ElbowCOVE Vertical OutsideCIVE Vertical InsideCHT Horizontal TeeCHX Horizontal Cross

5 Cover TypeC Cover

- 22 -


Marine Channel2”



O1-HG-125-CN

2 3 41




3 Depth125 = 1-1/4”


Horizontal Adjustable Plate Part Numbering SystemExample Part No.: O1-SS600CHAP

O1-SS 600 C HAP

1 2 3 4 5



3 Width300 = 3”400 = 4”600 = 6”800 = 8”900 = 9”

1000 = 10”1200 = 12”1800 = 18”2400 = 24”

5 Accessory TypeHAP Horizontal Adjustable Plate



Marine Channel

- 23 -


2”


- 24 -


Marine Channel2”


Vertical Adjustable Plate Part Numbering SystemExample Part No.: O1-SS600CVAP



3 Width300 = 3”400 = 4”600 = 6”800 = 8”900 = 9”

1000 = 10”1200 = 12”1800 = 18”2400 = 24”

5 Accessory TypeVAP Vertictal Adjustable Plate



O1-SS 600 C VAP

1 2 3 4 5

Marine Channel

- 25 -


3”



O1-HG 600 C 300

1 2 3 4 5



3 Width400 = 4”600 = 6”800 = 8”900 = 9”

1000 = 10”1200 = 12”1800 = 18”2400 = 24”


5 Depth300 = 3”

- 26 -


Marine Channel3”


Straight Section3” Deep



a stronger channel.2. Perforations accept 5/8” coated band for securing cables.3. Perforations in the side rail add extra securing capabilities.4. Straight sections supplied in 10' lengths.

End View

Marine Channel

- 27 -


3”




3 Width400 = 4”600 = 6”800 = 8”900 = 9”

1000 = 10”1200 = 12”1800 = 18”2400 = 24”



End View


O1-SS 600 C FCC

2 3 4 51


- 28 -


Marine Channel3”


End View


O1-SS 603 C CC

2 3 4 5 61



3 Width40 = 4”60 = 6”80 = 8”90 = 9”

100 = 10”120 = 12”180 = 18”240 = 24”



4 Depth3 = 3”


Marine Channel

- 29 -


3”


Channel Tray Fitting Part Numbering SystemExample Part No.: O1-HG603CHE-90

O1-HG 603 CHE-90

1 2 3 4 5



3 Width40 = 4”60 = 6”80 = 8”90 = 9”

100 = 10”120 = 12”180 = 18”240 = 24”

5 Fitting TypeCHE Horizontal Elbow (45°, 90°)COVE Vertical Outside (45°, 90°)CIVE Vertical Inside (45°, 90°)CHT Horizontal TeeCHX Horizontal Cross

4 Depth3 = 3”

6 Fitting Angle45 45°90 90°

6


a stronger fitting.2. Perforations accept 5/8” coated band for securing cables.

- 30 -


Marine Channel3”


CHE-45

CHE-90

CHT

Example Part No.: O1-SS603CHE-45CHE-45 45° Horizontal Elbow

Example Part No.: O1-SS603CHE-90CHE-90 90° Horizontal Elbow


Marine Channel

- 31 -


3”


CIVE-45

CIVE-90

Example Part No.: O1-SS603CIVE-45CIVE-45 45° Vertical Inside

Example Part No.: O1-SS603CIVE-90CIVE-90 90° Vertical Inside

- 32 -


Marine Channel3”


COVE-45

COVE-90

Example Part No.: O1-SS603COVE-45COVE-45 45° Vertical Outside

Example Part No.: O1-SS603COVE-90COVE-90 90° Vertical Outside

Marine Channel

- 33 -


3”



O1-SS 603 CHE-90-C

1 2 3 4 5 6 7



3 Width40 = 4”60 = 6”80 = 8”90 = 9”

100 = 10”120 = 12”180 = 18”240 = 24”

5 Fitting TypeCHE Horizontal Elbow (45°, 90°)COVE Vertical Outside (45°, 90°)CIVE Vertical Inside (45°, 90°)CHT Horizontal TeeCHX Horizontal Cross

7 Cover TypeC Cover

6 Fitting Angle45 45°90 90°

4 Depth3 = 3”

- 34 -


Marine Channel3”



O1-HG-300-CN

2 3 41




3 Depth300 = 3”


LIMITED WARRANTY; LIMITATION OF LIABILITY

OCEAN-1 WARRANTS THAT THE PRODUCTS TO BE SUPPLIED HEREUNDER ARE MANUFACTURED IN ACCORDANCE WITH MANUFACTUR-ER’S APPLICABLE MATERIAL SPECIFICATIONS AND ARE FREE FROM DEFECTS IN MATERIALS AND WORKMANSHIP USING MANUFACTUR-ER’S SPECIFICATIONS AS A STANDARD. ONLY SUCH PRODUCTS INSTALLED AND USED IN ACCORDANCE WITH APPLICABLE MANUFAC-TURER’S INSTRUCTIONS AND SPECIFICATIONS ARE IN ANY WAY WARRANTED BY OCEAN-1 OR MANUFACTURER. ALL OTHER CLAIMS AREWAIVED. THIS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY AND WARRANTY FROM OCEAN-1 AND THE MANUFACTURER. CUSTOMERAGREES NOT TO LOOK TO OCEAN-1 FOR ANY REMEDY IN CONNECTION WITH PRODUCTS NOT MANUFACTURED BY OCEAN-1, PROVIDEDTHAT OCEAN-1 HEREBY ASSIGNS TO CUSTOMER ALL MANUFACTURER’S WARRANTIES WITH RESPECT TO SUCH PRODUCTS, TO THEEXTENT ASSIGNABLE. THE PRODUCTS TO BE SUPPLIED HEREUNDER ARE NOT SOLD WITH ANY WARRANTIES, EXPRESS OR IMPLIED,INCLUDING ANY WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHICH IMPLIED WAR-RANTIES ARE SPECIFICALLY DISCLAIMED. THIS LIMITED WARRANTY IS CUSTOMER'S SOLE AND EXCLUSIVE REMEDY. IT IS EXPRESSLYUNDERSTOOD AND AGREED THAT THE LIMIT OF OCEAN-1’S LIABILITY WITH RESPECT TO PRODUCTS SUPPLIED BY OCEAN-1 WILL BE, ATOCEAN-1’S OPTION, REPAIR OF THE DEFECTIVE PRODUCT OR RE-SUPPLY OF A LIKE QUANTITY OF NON-DEFECTIVE PRODUCT, AND SUP-PLIER SHALL NOT BE LIABLE FOR ANY DAMAGES WHICH ARE BASED UPON ALLEGED NEGLIGENCE, BREACH OF WARRANTY, STRICT LIA-BILITY OR ANY OTHER THEORY OTHER THAN THE LIMITED WARRANTY SET FORTH ABOVE. CUSTOMER WILL BE RESPONSIBLE FOR ALLLABOR AND SERVICE CHARGES THAT MAY BE INCURRED WITH RESPECT TO EITHER THE ORIGINAL OR REPLACEMENT PRODUCT. IN NOEVENT WILL OCEAN-1 OR MANUFACTURER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.


CHANNEL TRAY SYSTEM - Ocean-1 · 2015. 1. 3. · 2400 = 24 ” 4 Tray Type C ... CIVE Vertical Inside CHT Horizontal Tee CHX Horizontal Cross 5 Cover Type C Cover. Marine Channel

Documents