This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1 - 3
Section 3: Industrial Igniters & F
lame R
ods
P.O. Box 846-Farmingdale, NJ 07727 ♦♦♦♦♦ Tel: (800) 631-2153 ♦♦♦♦♦ Fax: (732) 938-3969Check out our website at www.crownengineering.com
Electric FeedthroughsAuburn electric feedthroughs are used in oil and gas filled transformersand switching equipment.
Additional applications include terminals and overloads in hermetic airconditioning and refrigeration compressors, explosion proof electricmotors, generators, autoclaves, and centrifugal and submersible pumps.
They are compact and their one piece design assures positive electricaland leak-proof connection into the pressure vessel.
Page 2 - 3
P.O. Box 846-Farmingdale, NJ 07727 ♦♦♦♦♦ Tel: (800) 631-2153 ♦♦♦♦♦ Fax: (732) 938-3969Check out our website at www.crownengineering.com
Auburn® Industrial Igniters
149T-1 .090 I-32 I-63
I-75-1 I-75-5
SPECIAL NOTEPLEASE NOTE THAT MANY OFTHE AUBURN ITEMS WE OFFER(AFTER STOCK IS DEPLETED),CARRY A 12-14 WEEKSTANDARD LEAD TIME.PLEASE PLAN YOURINVENTORY REQUIREMENTSACCORDINGLY.
WE THANK YOU FOR YOURCONTINUED PATRONAGE. WEREALLY APPRECIATE YOURBUSINESS!
Page 3 - 3
Section 3: Industrial Igniters & F
lame R
ods
P.O. Box 846-Farmingdale, NJ 07727 ♦♦♦♦♦ Tel: (800) 631-2153 ♦♦♦♦♦ Fax: (732) 938-3969Check out our website at www.crownengineering.com
I-143
I-181I-144
I-90 Series Shrouded Igniters
IC-9-2
Auburn® Industrial Igniters
Page 4 - 3
P.O. Box 846-Farmingdale, NJ 07727 ♦♦♦♦♦ Tel: (800) 631-2153 ♦♦♦♦♦ Fax: (732) 938-3969Check out our website at www.crownengineering.com
IC-15 SI-140 SI-142
SI-180 SI-186 SI-320 / SI-322
Auburn® Industrial Igniters
Page 5 - 3
Section 3: Industrial Igniters & F
lame R
ods
P.O. Box 846-Farmingdale, NJ 07727 ♦♦♦♦♦ Tel: (800) 631-2153 ♦♦♦♦♦ Fax: (732) 938-3969Check out our website at www.crownengineering.com
WCC-1112-KH
WCC-12-1WCC-12
Auburn® Liquid Level Electrodes
WCC-1112
WCC-12KH
WCC-1138
Page 6 - 3
P.O. Box 846-Farmingdale, NJ 07727 ♦♦♦♦♦ Tel: (800) 631-2153 ♦♦♦♦♦ Fax: (732) 938-3969Check out our website at www.crownengineering.com
Auburn® Liquid Level Electrodes
WCT-938WCT-90WCC-1138-KH
022046“SI” Series Protector Boot
1099-CCeramic Terminal Connector
1041-CCeramic Terminal Connector
Page 7 - 3
Section 3: Industrial Igniters & F
lame R
ods
P.O. Box 846-Farmingdale, NJ 07727 ♦♦♦♦♦ Tel: (800) 631-2153 ♦♦♦♦♦ Fax: (732) 938-3969Check out our website at www.crownengineering.com
Crown Industrial Igniters & Flame Rods
Crown Engineering Corporation, the original OEM manufacturer of electrodes, igniters, and flame rodsfor oil and gas burners, is proud to announce it’s new line of industrial igniters and flame rods.
Never before has Crown’s quality and workmanship been so evident, as in our NEW industrial line ofigniters and flame rods. You can select from a wide variety of stocked items in this catalog or we canB.T.O. (build to order) against your submitted samples and/or drawings...your choice!
Our industrial igniters and flame rods match the original OEM critical specs from the seat of the glandnut to the tip of the center wire or from the end of the gland nut thread to the tip of the center wire,whichever is applicable. Our protruding insulator length or over-all length proves to be of no significancein the field application. All of our igniters are made of high quality heat resistant alloy (H.R.A.) centerwires and grade L3 Steatite glazed insulators (except wherever noted). In high pressure applicationscenter wires are cemented in place and Viton® O-rings are included inside the gland nut assemblies.
We look forward to serving all your industrial application needs.
CA140CA141CA142CA143CA144CA145CA146
I-6
CA120I-2 INS
CA100CA101CA102CA103CA104CA105
I-2
Page 8 - 3
P.O. Box 846-Farmingdale, NJ 07727 ♦♦♦♦♦ Tel: (800) 631-2153 ♦♦♦♦♦ Fax: (732) 938-3969Check out our website at www.crownengineering.com
CA200CA201CA202CA203CA204CA205
Crown Industrial Igniters & Flame Rods
CA160 CA180 CA190
CA195 CA210
Page 9 - 3
Section 3: Industrial Igniters & F
lame R
ods
P.O. Box 846-Farmingdale, NJ 07727 ♦♦♦♦♦ Tel: (800) 631-2153 ♦♦♦♦♦ Fax: (732) 938-3969Check out our website at www.crownengineering.com
Crown Industrial Igniters & Flame Rods
CA220 CA230CA231CA233CA235
CA240
CA250
CA260 CA262
Page 10 - 3
P.O. Box 846-Farmingdale, NJ 07727 ♦♦♦♦♦ Tel: (800) 631-2153 ♦♦♦♦♦ Fax: (732) 938-3969Check out our website at www.crownengineering.com
CA311CA322
CA290CA293CA303
CA330
IP-19
CA311CA322
IP-17-1 IP-18-1
CA310
IP-17
CA290CA293CA303
IP-16
CA280
IA-15-1
CA270
IA-15
Crown Industrial Igniters & Flame Rods
CA270 CA280
CA310CA330
Page 11 - 3
Section 3: Industrial Igniters & F
lame R
ods
P.O. Box 846-Farmingdale, NJ 07727 ♦♦♦♦♦ Tel: (800) 631-2153 ♦♦♦♦♦ Fax: (732) 938-3969Check out our website at www.crownengineering.com
CA350
IA-16
CA331
IP-19-1
CA333
IP-19S
CA390CA391CA392CA393FRS-2
CA377
I-5-99-34
CA370
I-5-99
Crown Industrial Igniters & Flame Rods
Page 12 - 3
P.O. Box 846-Farmingdale, NJ 07727 ♦♦♦♦♦ Tel: (800) 631-2153 ♦♦♦♦♦ Fax: (732) 938-3969Check out our website at www.crownengineering.com
P.O. Box 846-Farmingdale, NJ 07727 ♦♦♦♦♦ Tel: (800) 631-2153 ♦♦♦♦♦ Fax: (732) 938-3969Check out our website at www.crownengineering.com
Silicone Boots & Accessories
P/N: 50740Description:Straight silicone boot.Red/Orange in color.Temperature Rating: 450ο F
P/N: 50741Description:Right angle silicone boot.Black in color.Temperature Rating: 450ο F
P/N: 50742Description:Right angle silicone boot.Gray in color.Temperature Rating: 550ο F
P/N: 45180Description:Gland nut 13/16” Hex X 13/16-24Thread. Black oxide finish.
P/N: 45030Description:9/16” ID Brass lock ring.
P/N: 45031Description:1/2” ID Brass lock ring.
P/N: 45190, for use with 1/2” Dia.insulators. Hex size is 15/16”.Thread size is 1/2 - 14 NPT. Blackoxide finish.
P/N: 45191, for use with 9/16” Dia.insulators. Hex size is 15/16”.Thread size is 1/2 - 14 NPT. Blackoxide finish.
P/N: 45197, for use with 1/2” Dia.insulators. Hex size is 1”. Threadsize is 13/16 - 24 NEF. Black oxidefinish.
P/N: 45198, for use with 9/16” Dia.insulators. Hex size is 1 1/8”.Thread size is 3/4 - 14 NPT. Blackoxide finish.
Page 16 - 3
P.O. Box 846-Farmingdale, NJ 07727 ♦♦♦♦♦ Tel: (800) 631-2153 ♦♦♦♦♦ Fax: (732) 938-3969Check out our website at www.crownengineering.com
Part Number: P-380 (3/4” hex with a 3/8”-18 thread - MOP 350 psi)P-500 (7/8” hex with a 1/2”-14 thread - MOP 275 psi)P-750 (1 1/8” hex with a 3/4”-14 thread - MOP 200 psi)P-1000 (1 3/8” hex with a 1”- 11 1/2” thread - MOP 150 psi)
Description: Observation Ports Packaging: Poly bagged & tagged Includes: 1 - observation port from the above list with gasket.
Unsurpassed quality! Our ports offer unitized cico-weldconstruction with no organic gasket. Our one piece designis compact andleakproof at high temperatures and pressures.Maximum operating temperature is 400 degrees Fahrenheit.Maximum operating pressure (MOP) range from 150 thru350 psi as specified above.
Probes
Made of quality brassand stainless steel allour probes have astandard length of 24”with a threaded end.
Our probes give youthe reach you need andcan be cut to size in thefield if it’s too long.