242 CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Emboss Tape • Socket / Dual-row straddle type, SMT type • Card frame / for type Ⅰ cards • Adapter / for type Ⅰ ,Ⅱ cards • Header / for type Ⅰ,Ⅱ cards • Ejector / for type Ⅰ,Ⅱ cards In addition to the connectors applicable to CF typeⅠ cards, those for CF type Ⅱ cards are also available. Specifications ––––––––––––––––––– • Pitch: 1.27mm • Type: Dual-row at mating section • Current rating: 0.5A AC, DC/line • Temperature range: -20˚C to +60˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/40m Ω max. After environmental testing/20m Ωmax. (variation from initial value) • Insulation resistance: 1,000M Ωmin. 500V DC (Except for Adapter cards) • Withstanding voltage: 500V AC/minute (Except for Adapter cards) • Mating/unmating life: 10,000 cycles • Conforms to CFA. * RoHS compliant products are published. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. 46.0 ±0.05 40.16 ±0.05 31.115 ±0.05 0.635 ±0.05 (Pattern pitch) 0.4 ±0.035 (Pattern width) 43.2 ±0.05 6.35 ±0.05 2.3 14.5 ±0.05 5.0 ±0.05 2-φ1.7 +0.1 0 46.0 ±0.05 40.16 ±0.05 31.115 ±0.05 0.635 ±0.05 (Pattern pitch) 0.4 ±0.035 (Pattern width) 43.2 ±0.05 6.35 ±0.05 3.0 2.3 14.5 ±0.05 5.0 ±0.05 2-φ1.7 +0.1 0 2-φ2.2 +0.1 0 For TypeⅠ cards / Stand off 0mm Normal type / Reverse type For TypeⅠ cards / Stand off 1.64mm Normal type / Reverse type PC board layout (viewed from component side)
16
Embed
CF CARD CONNECTOR MA - Future Electronics · CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Emboss Tape • Socket / Dual-row straddle type, SMT type • Card
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
242
CF CARD CONNECTOR MA Type1.27mm pitch/50-circuit CF card connector
Emboss Tape
• Socket / Dual-row straddle type, SMT type• Card frame / for typeⅠcards• Adapter / for typeⅠ,Ⅱcards• Header / for typeⅠ,Ⅱcards• Ejector / for typeⅠ,Ⅱcards
In addition to the connectors applicable toCF typeⅠcards, those for CF type Ⅱ cardsare also available.
Specifications –––––––––––––––––––• Pitch: 1.27mm• Type: Dual-row at mating section• Current rating: 0.5A AC, DC/line• Temperature range: -20˚C to +60˚C
(including temperature rise in applyingelectrical current)
• Insulation resistance: 1,000M Ωmin. 500V DC (Except for Adapter cards)• Withstanding voltage: 500V AC/minute (Except for Adapter cards)• Mating/unmating life: 10,000 cycles• Conforms to CFA.* RoHS compliant products are published.* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.* Contact JST for details.
46.0±0.05
40.16±0.05
31.115±0.05
0.635±0.05
(Pattern pitch)0.4±0.035
(Pattern width)
43.2±0.05
6.35
±0.05
2.3
14.5±0.05
5.0±
0.05
2-φ1.7+0.10
46.0±0.05
40.16±0.05
31.115±0.05
0.635±0.05
(Pattern pitch)
0.4±0.035
(Pattern width)
43.2±0.05
6.35
±0.05
3.0
2.3
14.5±0.05
5.0±
0.05
2-φ1.7+0.102-φ2.2+0.10
For TypeⅠ cards/Stand off 0mmNormal type/Reverse type
For TypeⅠ cards/Stand off 1.64mm Normal type/Reverse type
PC board layout (viewed from component side)
243243
1.8
6.3
±0.0545.0
±0.05
2.7
±0.05
6.0
±0.05
28.5
±0.05
22.4±0.0547.75
±0.0543.17
(Pattern pitch) (Pattern width)
±0.050.635 ±0.0350.4
31.115
+0.05 0φ1.6
±0.0543.2
±0.0539.2
+0.05 03-φ1.1
+0.05 02-φ2.2
±0.05
(Pattarn pitch) (Pattarn width)
±0.050.635
±0.05
5.5
±0.05
5.8
±0.05
2.3
±0.0350.4
±0.05
30.0
±0.05
25.5
±0.0544.2
±0.0543.6
±0.0548.0
±0.05
6.35
±0.0540.9
±0.0540.16
31.115
+0.05 0φ1.6 +0.05
03-φ1.1
+0.1 02-φ2.2
±0.05
For TypeⅡ cards/Stand off 0mmNormal type Reverse type
Space-saving type For TypeⅠ cards/Stand off 0mmNormal type/ Reverse type
Ejector mounted header with shutter For TypeⅡ cardsReverse type (Stand off 0mm)
±0.050.635 ±0.030.4
31.115
±0.05
±0.05
36.4
±0.0533.95
±0.0541.4
+0.05 02-φ1.25
+0.05 02-φ2.2
±0.05
1.15
±0.05
1.9
±0.05
0.9
±0.05
1.55
±0.050.85
45.0±0.03
49.8±0.03
49.8±0.03
+0.1 050-φ0.45
±0.0349.0
±0.0531.115
0.635±0.03
0.78
±0.03
1.27
±0.03
±0.03
41.3
±0.03
31.7
±0.03
4.35
+0.1 04-φ1.6
(Pattern pitch) (Pattern width)
0.635±0.05 0.4±0.05
31.115±0.05
39.2±0.05
38.923.55±
0.05
6.65
±0.05
3.0±
0.05
1.55
±0.05
3.85
±0.05
4.35
±0.05
54.0
49.5±0.05
44.38±0.05
Reinforcement pitch
1.8±0.05
0φ1.1+0.05
02-φ2.1+0.05
0φ1.6+0.05
Components cannot bemounted inside of this area.
+0.05 0φ1.1+0.05
0φ1.6
±0.0545.13
(Pattern pitch) (Pattern width)
±0.050.635 ±0.0350.4
31.115
±0.0539.5
±0.05
±0.051.2 ±0.051.2
±0.051.8
±0.0543.63
Components cannot bemounted inside of this area.
±0.0543.33
±0.0544.38
1.2
0.2
1.0
±0.05
8.15
±0.05
3.85
±0.05
3.35
±0.05
1.55
±0.05
26.5±0.05
28.55
±0.05
33.95
(37.3)
±0.05
3.0
±0.05
1.9
R0.52 through-holes
Space-saving type For TypeⅡ cards/Stand off 0mmNormal type Reverse type
For Normal type header(Stand off 0mm) Left button/Push-push type
For Reverse type header(Stand off 0mm) Left button/Push-push type
4.0
3.6
4.0
(24.9) 37.3
22.57 23.58(6.35)
(4.5)
But
ton
stro
ke(2.7)
Car
d st
roke
(32.5)
8.8
14.8
(25.5)
(35.1)
6.3
(4.5)
But
ton
stro
ke
3.2
13.0
26.9
37.4
25.03 22.57
2-φ2.1
(2.7)
Car
d st
roke
49.5
39.2
Circuit No.1 Circuit No.25
Circuit 26 Circuit 504.7
(2.9)
Car
d st
roke
7.5
(36.4)
32.0
43.03
38.73
45.134.6545.13
(3.0)
Car
d st
roke
13.0
37.4
20.0
43.03
(3.4)
(4.45)
(36.0)
RoHS compliance ICM-MAE-R66C3 display (LF) on a label.ICM-MA2EP-L520A/ICM-MA2EP-L810E display (LF) on a label.Applicable headers display (LF)(SN) on a label.
For CF TypeⅡ Cards/Space-saving typeHeaderNormal type(Stand off 0mm)
Reverse type(Stand off 0mm)
Note: 1. Specifications conform to JIS C 0806. The tape width, connector recess dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded.
Note: 2. Specifications are subject to change without prior notice.