Exterior blinds Cetta 50 Cetta 65 Cetta 80 Cetta 80 Flexi EN Exterior blinds CETTA 80 FLEXI Note: for motorized Cetta 50 blinds the packet height (in its packaged state) is about 40 mm larger Note: for motorized Cetta 65 blinds the packet height (in its packaged state) is about 20 mm larger Note: for motorized Cetta 80 blinds the packet height (in its packaged state) is about 20 mm larger Note: for motorized Cetta 80 Flexi blinds the packet height (in its packaged state) is about 20 mm larger Packet height Cetta 50 Packet height Cetta 65 Packet height Cetta 80 Packet height Cetta 80 Flexi Isotra a.s. Bílovecká 2411/1, 746 01 Opava, Czech Republic Phone: +420 553 685 111, Fax: +420 553 685 110, E-mail: [email protected]www.isotra.cz 05/2010 Blind height (in mm) 500 510-700 701-1000 1010-1250 1260-1500 1510-1750 1760-2000 2010-2250 2260-2500 2510-2750 2760-3000 Packet height (in mm) 75 85 105 110 120 130 140 150 160 180 200 Blind height (in mm) 1010-1250 1260-1500 1510-1750 1760-2000 2010-2250 2260-2500 2510-2750 2760-3000 3010-3250 3260-3500 3510-3750 3760-4000 Packet height (in mm) 200 220 240 250 270 290 310 320 340 360 380 400 Blind height (in mm) 1010-1250 1260-1500 1510-1750 1760-2000 2010-2250 2260-2500 2510-2750 2760-3000 3010-3250 3260-3500 3510-3750 3760-4000 Packet height (in mm) 160 180 200 220 230 250 270 290 300 320 340 360 Blind height (in mm) 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500 3750 4000 Packet height for operating steel cable (in mm) 125 128 135 140 147 154 161 168 175 181 188 195 Packet height for operating guide rails (in mm) 121 140 150 161 171 182 192 203 213 223 232 245 Ladder cord 72 x 85 mm, polyester, weather and UV ray- durable Textile flat cord 8 mm in width, grey, made from special cloth ensuring increased stability, weather and UV-ray durability Side guide channels - steel cable coated in protective plastic - aluminum moulding, surface size 20 x 21 mm anodized aluminum or in available in colors listed in the RAL catalogue, aluminum anchor plates, clips available in plastic or steel CETTA 80 FLEXI BLIND DESCRIPTION Head rail 56 x 58 mm, made from primed, galvanized steel plates (measuring 0.6 mm in thickness) or from extruded aluminum Bottom rail 83 x 13 mm, made from primed, galvanized steel; surface material: coated in anodized aluminum or available in colors listed in the RAL catalogue Slats made from adjustable aluminum alloy, surfaces cov- ered with durable paint, 65 mm in width, (for Cetta 65), 80 mm in width (for Cetta 80) available in colors listed in the Isotra a.s. catalogue DESIGN OPTIONS Double-tilt slats - DUO SYSTEM enables tilting of the upper and lower slats resulting in many options for shading unwanted light, suitable for use in home offices, living rooms or conference rooms. There are 3 setting options with double-tilt slats: the upper part of the blinds may be left closed, the lower part may be closed, or the entire blind may be closed. Standard measurements Min. width: 600 mm Max. width: 4000 mm Max. height: 4000 mm Max. guaranteed surface: 8 m 2 (for manually controlled blinds) 16 m 2 (for motorized blinds) Design options for Cetta 80 Flexi Controls Head rail position direction Control panel placement Gearbox Operation rod up / down right / left x x Motor up / down - - x Front covers Protect blind from strong wind Blinds are packaged compact to reduce shipping height. Slats retain C-shape at both ends BLIND CONTROL Crank for manual manipulation of blinds and slats Motor mounted in the head rail, 230V/50Hz power supply, torque 3 – 20 Nm, power consumption 90 – 210 W, options for solar / wind power, op- tions for: remote control switch We do not manufacture atypical sizes for exterior blinds. For atypical size requests, please consult with the manufacturer!
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.