CERTIFICATE OF COMPLIANCE Tata Steel declares that the mechanical properties and chemical composition of Ympress®Laser comply with the following European standards Ympress Laser Grade Gauge Quality (European standard) Tolerances to Ympress E250C Laser ≤ 12.7 mm S235J2+AR (EN 10025-2) EN 10051 and thereby also: S235JR+AR (EN 10025-2) S235J0+AR (EN 10025-2) 12.7-20.0 mm S235J0+AR (EN 10025-2) EN 10051 and thereby also: S235JR+AR (EN 10025-2) Ympress S355MC Laser S355MC (EN10149-2) EN 10051 Ympress S420MC Laser S420MC (EN10149-2) EN 10051 Valid from 1 April 2017 until 1 April 2019 IN0117:PDF:EN:0617 Dr.ir. R. van de Moesdijk Manager Product Management Product Management & Development Tata Steel IJmuiden - The Netherlands T: +31 (0)251 498503