This report shall not be reproduced, unless in its entirety, without written approval from Kaycha Labs. This report is an Kaycha Labs certification. The results relate only to the material or product analyzed. Test results are confidential unless explicitly waived otherwise. Void after 1 year from test end date. Cannabinoid content of batch material may vary depending on sampling error. IC=In-control QC parameter, NC=Non-controlled QC parameter, ND=Not Detected, NA=Not Analyzed, ppm=Parts Per Million, ppb=Parts Per Billion. Limit of Detection (LoD) and Limit Of Quantitation (LoQ) are terms used to describe the smallest concentration that can be reliably measured by an analytical procedure. RPD=Reproducibility of two measurements. Action Levels are State determined thresholds for human safety for consumption and/or inhalation. The result >99% are variable based on uncertainty of measurement (UM) for the analyte. The UM error is available from the lab upon request.The "Decision Rule" for the pass/fail does not include the UM. The limits are based on F.S. Rule 64-4.310. Jorge Segredo Lab Director State License # CMTL-0002 ISO Accreditation # ISO/IEC 17025:2017 Accreditation PJLA-Testing 97164 ___________________ Signature 08/13/21 ___________________ Signed On 4131 SW 47th AVENUE SUITE 1408 DAVIE, FL, 33314, US Kaycha Labs Original Blueberry 1.5g Pre-Roll Original Blueberry Matrix: Flower Certificate of Analysis Sample:DA10810003-005 Harvest/Lot ID: 4258 5425 8382 0926 Cultivation Facility: Tampa Cultivation Processing Facility : Tampa Processing Seed to Sale# 4258 5425 8382 0926 Batch Date: 07/23/21 Batch#: 1829 2772 6022 6080 Sample Size Received: 27 gram Total Weight/Volume: 1214 units Retail Product Size: 1.5 gram Ordered : 08/09/21 sampled : 08/09/21 Completed: 08/13/21 Sampling Method: SOP.T.20.010 Aug 13, 2021 | FLUENT 82 NE 26th street Miami, FL, 33137, US PASSED Page 1 of 4 PRODUCT IMAGE SAFETY RESULTS MISC. Pesticides PASSED Heavy Metals PASSED Microbials PASSED Mycotoxins PASSED Residuals Solvents NOT TESTED Filth PASSED Water Activity PASSED Moisture PASSED Terpenes TESTED CANNABINOID RESULTS Total THC 15.703% TOTAL THC/Container :235.557 mg Total CBD 0.044% TOTAL CBD/Container :0.670 mg Total Cannabinoids 18.365% Total Cannabinoids/Container :275.475 mg CBDV CBDA CBGA CBG CBD THCV CBN D9-THC D8-THC CBC THCA % ND 0.0509 0.3530 0.0709 ND ND ND 0.4089 0.0410 ND 17.4400 mg/g ND 0.5100 3.5300 0.7100 ND ND ND 4.0900 0.4100 ND 174.4000 LOD 0.0010 0.0010 0.0010 0.0010 0.0001 0.0010 0.0010 0.0001 0.0010 0.0010 0.0010 % % % % % % % % % % % Cannabinoid Profile Test Analyzed by Weight Extraction date : Extracted By : 450 0.2305g 08/10/21 01:08:07 2076 Analysis Method -SOP.T.40.020, SOP.T.30.050 Reviewed On - 08/11/21 10:54:05 Batch Date : 08/10/21 10:06:48 Analytical Batch -DA029737POT Instrument Used : DA-LC-002 Running On : 08/11/21 10:01:38 Reagent Dilution Consums. ID 081021.R50 400 CE0123 070621.19 287035261 081021.R52 11945-019CD-019C 914C4-914AK 929C6-929H Full spectrum cannabinoid analysis utilizing High Performance Liquid Chromatography with UV detection (HPLC-UV). (Method: SOP.T.30.050 for sample prep and Shimadzu High Sensitivity Method SOP.T.40.020 for analysis. LOQ for all cannabinoids is 1 mg/L). Filth PASSED Analyzed By Weight Extraction date Extracted By 1879 NA 08/10/21 1879 Analyte LOD Result Filth and Foreign Material 0.1 ND Analysis Method -SOP.T.40.013 Batch Date : 08/10/21 11:21:52 Analytical Batch -DA029752FIL Reviewed On - 08/10/21 17:04:38 Instrument Used : Filth/Foreign Material Microscope This includes but is not limited to hair, insects, feces, packaging contaminants, and manufacturing waste and by-products. An SH-2B/T Stereo Microscope is use for inspection. Water Activity PASSED Analyte Analyzed by Weight Ext. date LOD A.L Result WATER ACTIVITY 457 NA 08/10/21 0.01 aw 0.65aw 0.471aW Analysis Method -Water Activity SOP.T.40.010 Batch Date : 08/10/21 11:19:38 Analytical Batch -DA029751WAT Reviewed On - 08/11/21 09:21:45 Instrument Used : DA-028 Rotronic Hygropalm Moisture PASSED Analyte Analyzed by Weight Ext. date LOD A.L Result MOISTURE CONTENT 1879 0.495g 08/10/21 1 % 15% 9.900% Analysis Method -Moisture Analysis SOP.T.40.011 Batch Date : 08/10/21 11:18:56 Analytical Batch -DA029750MOI Reviewed On - 08/10/21 17:11:01 Instrument Used : DA-003 Moisture Analyzer
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
This report shall not be reproduced, unless in its entirety, without written approval from Kaycha Labs. This report isan Kaycha Labs certification. The results relate only to the material or product analyzed. Test results areconfidential unless explicitly waived otherwise. Void after 1 year from test end date. Cannabinoid content of batchmaterial may vary depending on sampling error. IC=In-control QC parameter, NC=Non-controlled QC parameter,ND=Not Detected, NA=Not Analyzed, ppm=Parts Per Million, ppb=Parts Per Billion. Limit of Detection (LoD) andLimit Of Quantitation (LoQ) are terms used to describe the smallest concentration that can be reliably measured byan analytical procedure. RPD=Reproducibility of two measurements. Action Levels are State determined thresholdsfor human safety for consumption and/or inhalation. The result >99% are variable based on uncertainty ofmeasurement (UM) for the analyte. The UM error is available from the lab upon request.The "Decision Rule" for thepass/fail does not include the UM. The limits are based on F.S. Rule 64-4.310.
Jorge SegredoLab Director
State License # CMTL-0002ISO Accreditation # ISO/IEC17025:2017 Accreditation
PJLA-Testing 97164
___________________Signature
08/13/21
___________________Signed On
4131 SW 47th AVENUE SUITE 1408DAVIE, FL, 33314, US
Full spectrum cannabinoid analysis utilizing High Performance Liquid Chromatography with UV detection (HPLC-UV). (Method: SOP.T.30.050 for sample prep andShimadzu High Sensitivity Method SOP.T.40.020 for analysis. LOQ for all cannabinoids is 1 mg/L).
Filth PASSEDAnalyzed By Weight Extraction date Extracted By1879 NA 08/10/21 1879Analyte LOD ResultFilth and Foreign Material 0.1 NDAnalysis Method -SOP.T.40.013 Batch Date : 08/10/21 11:21:52Analytical Batch -DA029752FIL Reviewed On - 08/10/21 17:04:38Instrument Used : Filth/Foreign Material Microscope
This includes but is not limited to hair, insects, feces, packaging contaminants, and manufacturing wasteand by-products. An SH-2B/T Stereo Microscope is use for inspection.
Water Activity PASSEDAnalyte Analyzed by Weight Ext. date LOD A.L ResultWATER ACTIVITY 457 NA 08/10/21 0.01 aw 0.65aw 0.471aWAnalysis Method -Water ActivitySOP.T.40.010 Batch Date : 08/10/21 11:19:38Analytical Batch -DA029751WAT Reviewed On - 08/11/21 09:21:45Instrument Used : DA-028 Rotronic Hygropalm
Moisture PASSEDAnalyte Analyzed by Weight Ext. date LOD A.L ResultMOISTURE CONTENT 1879 0.495g 08/10/21 1 % 15% 9.900%
Analysis Method -MoistureAnalysis SOP.T.40.011 Batch Date : 08/10/21 11:18:56Analytical Batch -DA029750MOI Reviewed On - 08/10/21 17:11:01Instrument Used : DA-003 Moisture Analyzer
This report shall not be reproduced, unless in its entirety, without written approval from Kaycha Labs. This report isan Kaycha Labs certification. The results relate only to the material or product analyzed. Test results areconfidential unless explicitly waived otherwise. Void after 1 year from test end date. Cannabinoid content of batchmaterial may vary depending on sampling error. IC=In-control QC parameter, NC=Non-controlled QC parameter,ND=Not Detected, NA=Not Analyzed, ppm=Parts Per Million, ppb=Parts Per Billion. Limit of Detection (LoD) andLimit Of Quantitation (LoQ) are terms used to describe the smallest concentration that can be reliably measured byan analytical procedure. RPD=Reproducibility of two measurements. Action Levels are State determined thresholdsfor human safety for consumption and/or inhalation. The result >99% are variable based on uncertainty ofmeasurement (UM) for the analyte. The UM error is available from the lab upon request.The "Decision Rule" for thepass/fail does not include the UM. The limits are based on F.S. Rule 64-4.310.
Jorge SegredoLab Director
State License # CMTL-0002ISO Accreditation # ISO/IEC17025:2017 Accreditation
PJLA-Testing 97164
___________________Signature
08/13/21
___________________Signed On
4131 SW 47th AVENUE SUITE 1408DAVIE, FL, 33314, US
Analyzed by Weight Extraction date Extracted By1082 1.0133g 08/10/21 12:08:02 1082
Analysis Method -SOP.T.40.090Analytical Batch -DA029685TER Reviewed On - 08/11/21 11:14:35Instrument Used : DA-GCMS-005Running On : 08/09/21 16:12:03Batch Date : 08/09/21 09:22:41
Reagent Dilution Consums. ID
061821.08 10 CE0123CE012313898901
Terpenoid profile screening is performed using GC-MS/MS TQ-8040 with Liquid Injection(Gas Chromatography – Mass Spectrometer Triple Quad) which can screen 37 terpenesusing Method SOP.T.40.090 Terpenoid Analysis Via GC-MS/MS.
Total (%) 0.811
This report shall not be reproduced, unless in its entirety, without written approval from Kaycha Labs. This report isan Kaycha Labs certification. The results relate only to the material or product analyzed. Test results areconfidential unless explicitly waived otherwise. Void after 1 year from test end date. Cannabinoid content of batchmaterial may vary depending on sampling error. IC=In-control QC parameter, NC=Non-controlled QC parameter,ND=Not Detected, NA=Not Analyzed, ppm=Parts Per Million, ppb=Parts Per Billion. Limit of Detection (LoD) andLimit Of Quantitation (LoQ) are terms used to describe the smallest concentration that can be reliably measured byan analytical procedure. RPD=Reproducibility of two measurements. Action Levels are State determined thresholdsfor human safety for consumption and/or inhalation. The result >99% are variable based on uncertainty ofmeasurement (UM) for the analyte. The UM error is available from the lab upon request.The "Decision Rule" for thepass/fail does not include the UM. The limits are based on F.S. Rule 64-4.310.
Jorge SegredoLab Director
State License # CMTL-0002ISO Accreditation # ISO/IEC17025:2017 Accreditation
PJLA-Testing 97164
___________________Signature
08/13/21
___________________Signed On
4131 SW 47th AVENUE SUITE 1408DAVIE, FL, 33314, US
Pesticide screen is performed using LC-MS and/or GC-MS which can screen down to below single digit ppbconcentrations for regulated Pesticides. Currently we analyze for 67 Pesticides. (Method: SOP.T.30.060Sample Preparation for Pesticides Analysis via LCMSMS and GCMSMS.SOP.T40.065/SOP.T.40.066/SOP.T.40.070 Procedure for Pesticide Quantification Using LCMS and GCMS). *Volatile Pesticide screening is performed using GC-MS which can screen down to below single digit ppbconcentrations for regulated Pesticides. Analytes marked with an asterisk were tested using GC-MS.
This report shall not be reproduced, unless in its entirety, without written approval from Kaycha Labs. This report isan Kaycha Labs certification. The results relate only to the material or product analyzed. Test results areconfidential unless explicitly waived otherwise. Void after 1 year from test end date. Cannabinoid content of batchmaterial may vary depending on sampling error. IC=In-control QC parameter, NC=Non-controlled QC parameter,ND=Not Detected, NA=Not Analyzed, ppm=Parts Per Million, ppb=Parts Per Billion. Limit of Detection (LoD) andLimit Of Quantitation (LoQ) are terms used to describe the smallest concentration that can be reliably measured byan analytical procedure. RPD=Reproducibility of two measurements. Action Levels are State determined thresholdsfor human safety for consumption and/or inhalation. The result >99% are variable based on uncertainty ofmeasurement (UM) for the analyte. The UM error is available from the lab upon request.The "Decision Rule" for thepass/fail does not include the UM. The limits are based on F.S. Rule 64-4.310.
Jorge SegredoLab Director
State License # CMTL-0002ISO Accreditation # ISO/IEC17025:2017 Accreditation
PJLA-Testing 97164
___________________Signature
08/13/21
___________________Signed On
4131 SW 47th AVENUE SUITE 1408DAVIE, FL, 33314, US
Analyte LOD Result Action LevelESCHERICHIA_COLI_SHIGELLA_SPP not present in 1 gram.SALMONELLA_SPECIFIC_GENE not present in 1 gram.ASPERGILLUS_FLAVUS not present in 1 gram.ASPERGILLUS_FUMIGATUS not present in 1 gram.ASPERGILLUS_TERREUS not present in 1 gram.ASPERGILLUS_NIGER not present in 1 gram.TOTAL YEAST AND MOLD 10 9000 CFU 100000
Analysis Method -SOP.T.40.043 / SOP.T.40.044 / SOP.T.40.041Analytical Batch -DA029722MIC , DA029724TYM Batch Date : 08/10/21, 08/10/21Instrument Used : PathogenDx Scanner DA-111,Running On : 08/11/21, 08/11/21
Analyzed by Weight Extraction date Extracted By1829, 513 1.8455g 08/10/21 513, 513
Reagent Consums. ID Consums. ID Consums. ID Consums. ID071921.R36021921.44
Microbiological testing for Fungal and Bacterial Identification via Polymerase Chain Reaction (PCR) methodconsisting of sample DNA amplified via tandem Polymerase Chain Reaction (PCR) as a crude lysate which avoidspurification. (Method SOP.T.40.043) If a pathogenic Escherichia Coli, Salmonella, Aspergillus fumigatus,Aspergillus flavus, Aspergillus niger, or Aspergillus terreus is detected in 1g of a sample, the sample fails themicrobiological-impurity testing. Pour-plating is used for quantitation and confirmation, Total Yeast and Mold hasan action limit of 100,000 CFU.
Analysis Method -SOP.T.30.065, SOP.T.40.065Analytical Batch -DA029729MYC | Reviewed On - 08/12/21 13:01:27Instrument Used : DA-LCMS-003 (MYC)Running On : 08/11/21 16:18:47Batch Date : 08/10/21 09:57:32
Analyzed by Weight Extraction date Extracted By585 g 08/10/21 03:08:10 585
Aflatoxins B1, B2, G1, G2, and Ochratoxins A testing using LC-MS. (Method: SOP.T.30.065 forSample Preparation and SOP.T40.065 Procedure for Mycotoxins Quantification Using LCMS. LOQ 1.0ppb). Aflatoxin B1, B2, G1, and G2 must individually be <20ug/Kg. Ochratoxins must be <20µg/Kg.
Analyzed by Weight Extraction date Extracted By1879 0.2499g 08/10/21 12:08:52 1879
Analysis Method -SOP.T.40.050, SOP.T.30.052, SOP.T.30.053, SOP.T.40.051Analytical Batch -DA029738HEA | Reviewed On - 08/12/21 09:00:51Instrument Used : DA-ICPMS-003Running On : 08/11/21 15:02:54Batch Date : 08/10/21 10:14:30
Heavy Metals screening is performed using ICP-MS (Inductively Coupled Plasma – MassSpectrometer) using Method SOP.T.30.052, SOP.T.30.053 Sample Preparation for Heavy MetalsAnalysis via ICP-MS and SOP.T.40.050, SOP.T.40.051 Heavy Metals Analysis via ICP-MS.