Ceramic tiles Product introduce: Ceramic tile and mesh are very versatile and can be used or cut to fit in small pipe. It can also be lined on a steel with a contour or slope. We also offer weldable tile and standard tile ranging from all different sizes. The ceramic tile protects the shell or steel from abrasion or wearing through the equipment. It extents the life of equipment and machinery without contaminating any of the products. Technical Specifications: Item K-95 K-99 K-ZTA K-Z Ceramic wear material 94% alumina 98% alumina 80% alumina 99% zirconia Density 3.65 g/cm3 3.85 g/cm3 4.2 g/cm3 6.1 g/cm3 Porosity < 0.1 < 0.1 < 0.1 < 0.1 Compressive Strength ≥ 1700 Mpa ≥ 1800 Mpa ≥ 2100 Mpa ≥ 2400 Mpa Rockwell Hardness ≥ 85 HRA ≥ 86 HRA ≥ 90 HRA ≥ 88 HRA Vickers Hardness ≥ 1000 HV10 ≥ 1100 HV10 ≥ 1200 HV10 ≥ 1150 HV10 Fracture Toughness (KIC) ≥ 4.5 Mpa.m1/2 ≥ 4.8 Mpa.m1/2 ≥ 5.5 Mpa.m1/2 ≥ 7.5 Mpa.m1/2 Bending Strength ≥ 290 Mpa ≥ 290 Mpa ≥ 320 Mpa ≥ 360 Mpa Wear Volume ≤ 0.05 cm3 ≤ 0.01 cm3 ≤ 0.009 cm3 ≤ 0.007 cm3 ASTM G65 Relative Factor 9-11 9-11 11-14 12-15 Application: ---Deflectors/Impact plates ---Chutes ---Bins/Hoppers ---Skirt liners ---Srackers & Reclaimers