ceoSff Engineers Certificate of Analysis Adhesion to Asphalt This certificate confirms that the above product wastested as perstated standard specification using calibrated equipment andqualified staff. The following test results were obtained. Test Results Consuitirag Engineers and Geosaientists GeoEngineers - Gifford, lnc. GeoEngineers, Inc. 523 East 2nd Ar,'enue Spokane, WA !!202 Telephone (5 09) 363-3125 Far (509) 3633126 Piinted on recycled paper. Product Name Streetbond SP-150 Batch Number ResinA: #93937, Colorant: Brick #93461: CatalvstB: #93938 Manufacture Date 2107laz Samole Preo Date 3108102 Testing Date(s) 3t15t02 Test Method ASTM D-4541Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers Test Conditions As per ASTM standard. Any deviation reported at end of certificate. 3/8" Unpolished-Asphalt 1,43 208 3/8" Polished-Asohalt 1.15 167 3i4" Unpolished-Asphalt 1.83 . zoo 3/4" Polished-Asphalt 2.50 342 * Combination Asphalt Cohesive / Coatino Adhesive **Asohalt Cohesive cured at 23"C.122% RHforone week asohalt surface is theuntouched surface of the rli Polished asphalt surface is the cut surface and is intended to simulate aged asphalt. Utilized Positest Portable Pull-Off Adhesion Tester (Type ll) device and aluminum dollies Results are thea of three trials.