6/11/2013 1 Centro para a Ecologia Industrial Center for Industrial Ecology (CIE) ADAI-LAETA, Universidade de Coimbra http://www2.dem.uc.pt/CenterIndustrialEcology/ Coordenação: Prof. Fausto Freire E-mail: [email protected]Tel.: +351 239 790 739/32. Fax: +351 239 790 701 Dep. Eng. Mecânica, Faculdade de Ciências e Tecnologia da Universidade de Coimbra 1 Missão e Objectivos O que é o Centro para a Ecologia Industrial (CIE)? • O CIE está localizado na Universidade de Coimbra e faz parte da equipa de investigação da ADAI- LAETA (Laboratório Associado em Energia,Transportes e Aeronáutica). •O CIE promove Investigação, Desenvolvimento, Inovação e Ensino em Ecologia Industrial, com o objectivo de apoiar organizações e indústrias na redução dos impactes ambientais ao longo do ciclo de vida dos produtos, processos e serviços. • Reúne Professores, Investigadores e Estudantes de Doutoramento/Mestrado. A investigação é realizada em colaboração com outras instituições e parceiros internacionais. Principais áreas de investigação do CIE: • Gestão e avaliação de ciclo de vida. • Avaliação da sustentabilidade de sistemas de energia; Bioenergia e bio-productos; • Edifícios e arquitectura sustentável; • Modelos de optimização económica e ambiental integrada. • ACV extendida com análise multicritério (MCDA) 2
21
Embed
Centro para a Ecologia Industrial - iee.usp.br Fausto Freire 2... · 6/11/2013 1 Centro para a Ecologia Industrial Center for Industrial Ecology (CIE) ADAI-LAETA, Universidade de
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
6/11/2013
1
Centro para a Ecologia IndustrialCenter for Industrial Ecology (CIE)
Ferreira, C.; Ribeiro, B.; Mendes, R.; Freire, F. (2013). “Life-Cycle Assessment of ammunition demilitarisation in a static kiln”.Propellants, Explosives, Pyrotechnics, 2013, 38, 296 – 302.
Garcia, R.; Freire, F. (2013). “Carbon footprint of particleboard: a comparison between ISO/DIS 14067, GHG Protocol, PAS2050 and Climate Declaration”. Journal of Cleaner Production (in review).
Castanheira, E; Freire, F. (2013). “Greenhouse gas assessment of soybean: implications of land use change and differentcultivation systems”. Journal of Cleaner Production. (in press). http://dx.doi.org/10.1016/j.jclepro.2013.05.026
Faria, F.; Marques, P.; Moura, P.; Freire, F.; Delgado, J.; Almeida, A. T. (2013). “Impact of the electricity mix and use profile in the life-cycle assessment of electric vehicles”. Renewable & Sustainable Energy Reviews. 24, 271-287.
Malça, J., Coelho, A., Freire, F. (2013). “Environmental Life-Cycle Assessment of Rapeseed-Based Biodiesel: Alternative Cultivation Systems andLocations”. Applied Energy. (in final review).
González-García, S.; Castanheira, E.; Dias, A. C.; Arroja, L. (2013). “Environmental life cycle assessment of a dairy product: theyoghurt”. The International Journal of LCA, vol. 18, issue 4, pp. 796-811.
Silva, D.; Lahr, F.; Garcia, R.; Freire, F.; Ometto, A. (2012). “Life cycle assessment of medium density particleboard (MDP)produced in Brazil”. International Journal of Life Cycle Assessment http://dx.doi.org/10.1007/s11367-013-0583-3
Garcia, R.; Freire, F. (2012). “Environmental assessment of wood-based panels: a comparison of life-cycle-based tools”.International Journal of Sustainable Construction, 1(1), 63-71.
Malça, J.; Freire, F. (2012). “Addressing land use change and uncertainty in the life-cycle assessment of wheat-basedbioethanol”. Energy, the International Journal, vol 45, issue 1, 519-527. http://dx.doi.org/10.1016/j.energy.2012.02.070
Monteiro, H.; Freire, F. (2012)."Life-Cycle Assessment of a house with alternative exterior walls: comparison of three impactassessment methods". Journal Energy and Buildings, vol. 47, pp. 572-583.
Publicações recentes: revistas ISI em 2012-2013
30
Lista completa em: http://www2.dem.uc.pt/CenterIndustrialEcology/publications.html
6/11/2013
16
31
Outras publicações em revistas ISI
Batterman, S.; Martins, A.; Antunes, C.; Freire, F.; Gameiro, M. (2011). "Development and Application of Competencies forGraduate Programs in Energy and Sustainability". Journal of Professional Issues in Engineering Education and Practice,vol. 137 (4), pp. 198-207. http://dx.doi.org/10.1061/(ASCE)EI.1943-5541.0000069.
Garcia, R.; Freire, F. (2011). “Modelação Energética e Ambiental do Ciclo de Vida de Painéis Aglomerados dePartículas”. Construlink, 28 (9), pp 22-30.
Malça, J.; Freire, F. (2011). "Life-cycle studies of biodiesel in Europe: A review addressing the variability of results andmodeling issues". Renewable and Sustainable Energy Reviews,Vol. 15, nº1, 338–351.
Monteiro, H.; Freire, F. (2011). "Environmental Life-Cycle Impacts of a Single-family House in Portugal: AssessingAlternative Exterior Walls with two methods", Gazi University Journal of Science (GU J Sci) 24, 3: 527 - 534.
Monteiro, H. and Freire F. (2012)."Life-Cycle Assessment of a house with alternative exterior walls: comparison of threeimpact assessment methods"
Malça, J.; Freire, F. (2010). “Uncertainty Analysis in Biofuel Systems: An Application to the Life Cycle of Rapeseed Oil".J of Industrial Ecology, 14(2), 322-334;
Malça, J,; Freire, F. (2009). "Energy and Environmental Benefits of Rapeseed Oil Replacing Diesel." Int J Green Energy. 6(3), 287-301
Malça, J.; Freire, F. (2006). “Renewability and life-cycle energy efficiency of bioethanol and bioETBE: assessing theimplications of allocation”. ENERGY ,31(15), 3362-338
Freire, F.; Thore, S.; Ferrao, P. (2001). "Life cycle activity analysis: logistics and environmental policies for bottledwater in Portugal", OR Spektrum 23, 1: 159 – 182
Freire, F.; Ferrao, P.; Reis, C.; Thore, S. (2000). "Life Cycle Activity Analysis Applied to the Portuguese Used TireMarket", Journal of Passenger Car – Mechanical Systems 109, 6: 1980 - 1988.
Castanheira É.G.;Freire F.;(2011). “Environmental performance of palm oil biodiesel in a life-cycle perspective". 2011 IEEE International Symposium on Sustainable Systems and Technology. Chicago, Illinois.
Castanheira É.G.;Freire F.;(2011). “Life cycle assessment of palm oil biodiesel addressing land use change.". ECOS2011,
Castanheira É.G.;Freire F.;(2011). “LC GHG Assessment of soybeans.". In: LCM 2011 -Towards Life Cycle Sustainability Management. Berlin. Proceedings of LCM 2011
Garcia, R.; Freire F.;(2011). “Avaliação comparativa de instrumentos de gestão ambiental aplicados a painéisde madeira.". In: 1º Congresso IBERO-LATINOAMERICANO da madeira na construção.
Garcia, R.; Freire F.;(2011). “Modelação energética e ambiental do ciclo de vida de painéis aglomerados de partículas.". In: 1º Congresso IBERO-LATINOAMERICANO da madeira na construção.
Malça, J.; Freire F.;(2011). “GHG savings and carbon payback time of RO displacing FD in Europe.". In: IEEE International Symposium on Sustainable Systems and Technology. Chicago, Illinois.
Malça, J.; Freire F.;(2011). “Uncertainty analysis in life cycle GHG emissions and energy efficiency of bioethanol replacing gasoline.". ECOS2011
Castanheira, E.; Freire, F. (2010). "CO2 and N2O emissions from palm oil plantations: impacts of land use and land change", LCAFood 2010.
Castanheira, E.; Freire, F. (2010). "GHG Emissions Assessment of Palm Oil: uncertainty and scenario analysisfor increased production", URPDM 2010
Malça, J.; Freire, F. (2010). "A comprehensive framework for incorporating uncertainty in the Life CycleAssessment of biofuels for transportation ", URPDM 2010
Balafoutis, A.; Freire, F.; Papadakis, G. (2010). "Life Cycle Assessment of sunflower oil produced in Greece andused as fuel in tractor diesel engines",AgEng2010
Lista completa em: http://www2.dem.uc.pt/CenterIndustrialEcology/publications.html
Publicações em conferências (2012)
32
6/11/2013
17
Castanheira É.G.;Freire F.;(2011). “Environmental performance of palm oil biodiesel in a life-cycle perspective". 2011 IEEE International Symposium on Sustainable Systems and Technology. Chicago, Illinois.
Castanheira É.G.;Freire F.;(2011). “Life cycle assessment of palm oil biodiesel addressing land use change.". ECOS2011,
Castanheira É.G.;Freire F.;(2011). “LC GHG Assessment of soybeans.". In: LCM 2011 -Towards Life Cycle Sustainability Management. Berlin. Proceedings of LCM 2011
Garcia, R.; Freire F.;(2011). “Avaliação comparativa de instrumentos de gestão ambiental aplicados a painéisde madeira.". In: 1º Congresso IBERO-LATINOAMERICANO da madeira na construção.
Garcia, R.; Freire F.;(2011). “Modelação energética e ambiental do ciclo de vida de painéis aglomerados de partículas.". In: 1º Congresso IBERO-LATINOAMERICANO da madeira na construção.
Malça, J.; Freire F.;(2011). “GHG savings and carbon payback time of RO displacing FD in Europe.". In: IEEE International Symposium on Sustainable Systems and Technology. Chicago, Illinois.
Malça, J.; Freire F.;(2011). “Uncertainty analysis in life cycle GHG emissions and energy efficiency of bioethanol replacing gasoline.". ECOS2011
Castanheira, E.; Freire, F. (2010). "CO2 and N2O emissions from palm oil plantations: impacts of land use and land change", LCAFood 2010.
Castanheira, E.; Freire, F. (2010). "GHG Emissions Assessment of Palm Oil: uncertainty and scenario analysisfor increased production", URPDM 2010
Malça, J.; Freire, F. (2010). "A comprehensive framework for incorporating uncertainty in the Life CycleAssessment of biofuels for transportation ", URPDM 2010
Balafoutis, A.; Freire, F.; Papadakis, G. (2010). "Life Cycle Assessment of sunflower oil produced in Greece andused as fuel in tractor diesel engines",AgEng2010
Lista completa em: http://www2.dem.uc.pt/CenterIndustrialEcology/publications.html
Publicações em conferências (2010-2011)
33
Teses de Doutoramento
34
Concluídas:
João Malça (2006-2011) “Incorporating uncertainty in the life cycle modeling of biofuels: Energyrenewability and greenhouse gas emissions of bioethanol and biodiesel in Europe”.
Em curso (2009-…):
Amir Safaei (2009-…) “Life cycle optimization model for integrated cogeneration and solar systems”(supervision together with Prof. Carlos H. Antunes).
Ariovaldo Carvalho (2009-…) “An Integrated Assessment Methodology Applied to the Brazilian BioethanolCase” (supervision together with Prof. Carlos H. Antunes).
Érica Castanheira (2009-…) “Environmental Assessment of Biofuels: A life cycle multi-criteria decision-support approach”.
Helena Monteiro (2009-…) “Integrating life cycle assessment and energy building simulation to improveresidential buildings’ performance”.
VanessaTavares (2010-…) “Prefab dwellings: an energetic,economic and environmental aproach”.
Em curso (2011-…):
Joana Bastos (2011-…) “Integrating urban design and sustainable development: Life-cycle energyand greenhouse gas emissions from urban residential patterns” (supervision together with Prof. S.Batterman and Prof. J. Bandeirinha).
Em curso (2012-…):
Carla Caldeira (2012-…) “Blending Optimization of biodiesel produced with waste and virgin oils”(supervision together with Prof. Luís Dias).
Carla Rodrigues (2012-…) “Sustainability Assessment Of Building Retrofit: An Integrated Life-cycleApproach”.
Carlos Ferreira (2012-…) “Improvement of the energy and environmental performance of militaryammunition: an extended Life-Cycle approach addressing site-specific impacts” (supervision togetherwith Prof. Baranda Ribeiro).
Ana Mateus. (2012). "Avaliação de Ciclo de Vida do Azeite e do Vinho em Portugal". Environmental Eng.Integrated MasterThesis.
António Coelho. (2012). "Avaliação de Ciclo de Vida do Biodiesel de Colza Incorporando Incerteza".Environmental Eng. Integrated MasterThesis.
João Queirós. (2012). "Avaliação e Certificação da Sustentabilidade de Biodiesel: Óleos AlimentaresUsados versus Óleo de Soja". Environmental Eng. Integrated MasterThesis.
Filipa Figueiredo. (2011). "Biodiesel de girassol ou microalgas em Portugal: Uma avaliaçãocomparativa de ciclo de vida". Environmental Eng. Integrated MasterThesis.
Carlos Ferreira. (2010) "Avaliação integrada da desmilitarização de explosivos: incineração versusvalorização do material energético". Environmental Eng. Integrated Master Thesis.
Maria Inês Santos.(2010) "Avaliação de ciclo de vida de um produto cerâmico sanitário - Casode estudo:Roca S.A". Environmental Eng. Integrated MasterThesis.
Pedro Marques. (2010) "Avaliação comparativa de Ciclo de Vida de automóveis: Eléctrico, Plug-inEléctrico Híbrido e Convencional". Environmental Eng. Integrated MasterThesis.
Rita Garcia. (2010) "Avaliação comparativa de instrumentos de ciclo de vida aplicados a doissistemas com biomassa: painéis e electricidade".Environmental Eng. Integrated MasterThesis.
Teses de Mestrado (concluídas)
36
6/11/2013
19
37
Teses de Mestrado (concluídas)
Helena Monteiro. (2010). "Life Cycle Assessment of a Portuguese House with Different Exterior Walls and Alternative Heating Systems". Energy for sustainability MSc Thesis.
Ana Rita André. (2009). "Avaliação de ciclo de vida de biodiesel com base na soja: considerando os efeitos directos de alterações na utilização do solos". Mechanical Eng. Integrated Master Thesis.
João Vaz Santos. (2009). "Avaliação de Ciclo de Vida de um Sistema de Conversão de Energia das Ondas em Portugal". Mechanical Eng. Integrated Master Thesis.
Nélia Isabel Pereira Oliveira. (2009). "Avaliação de sistemas de recolha e transporte de resíduos sólidos urbanos: eficiência energética e emissões poluentes". Environmental Eng. Integrated Master Thesis.
Ana Filipa Duarte de Sousa Coelho. (2008). "Life Cycle Assessment of Electricity and Biofuel productionsystems from Ligno-cellulosic Biomass for Portugal". Environmental Eng. Integrated Master Thesis.
Inês Quadros dos Santos. (2008). "Avaliação integrada da microgeração com sistemas fotovoltaicos: caso de estudo do edifício do Laboratório de Aerodinâmica Industrial". Environmental Eng. Integrated Master Thesis.
Jaime Santos. (2008). "Análise Energética e Ambiental de Ciclo de Vida do óleo de palma na Colômbia". Mechanical Eng. Integrated MasterThesis.
João Nunes. (2008). "Avaliação Integrada da Produção de electricidade com base em Biomassa Lenho-Celulósica em Portugal: Emissões de GEE, Análise Tecnológica e Energética de CV". Master of Science Thesis (“Pré- Bolonha”).
38
Colaborações
6/11/2013
20
39
Localização e Contacto
Centro para a Ecologia Industrial
Departamento de Engenharia Mecânica - Polo IIFaculdade de Ciências e Tecnologia da Universidade de Coimbra.
Morada:Rua Luís Reis Santos3030-788 CoimbraPortugal