Cellocator Cello-‐IQ GNSS Basic Evaluation Kit
NAME DESCRIPTION PICTURE
Cellocator ™ Cello-‐IQ 50 K090-‐010 Includes: CT7800122-‐000
Cello IQ is the first system in the market to provide driver behavior monitoring device ready for integration with any 3rd party fleet management SW platform, as opposed to a complete service. Cello IQ detects, processes and sends reports on: • Vehicle state (engine status, Idling /
Movement) • Driver behavior indicators, in the form
of predefined set of processed events and raw data of hazardous driving (“safety” features)
• Accident events and accident dynamics raw data (“EDR” features) for later reconstruction
• Economic driving analysis in terms of relative score reflecting fuel consumption and wear and tear etc.
.
Complimentary Equipment
NAME DESCRIPTION PART NUMBER PICTURE
Cello Family Back up battery
Enables continuous work for mission-‐critical applications when external power is disconnected (Cello family).
712-‐20062
USB converter for RS232 and extender cable
712-‐30017
Interconnection cable For Cello units
711-‐00260
Harness full option interconnection
711-‐00261
Complimentary Equipment
NAME DESCRIPTION PART NUMBER PICTURE
CelloFamily Protector
The CelloFamily Protector is a silicone/ rubber cover for CelloFamily devices designed to improve the environment and ingress protection of the device from IP40 to IP66, increasing solid-‐particle-‐protection from 1 mm to Dust-‐Tight (No ingress of dust; complete protection against contact) and liquid-‐ingress-‐protection from none to Powerful-‐water-‐jets protection.
712-‐20025
Cello 6 wires harness 6 Wires Harness with DFD Connector, 1.2 meter Length (1.8 Meter power wires), A color-‐coded harness offering easy installation for Cello units. Power & ignition, Ext. Immobilizer Output, Ext. Data (Serial port), Shock Sensor (Unlock 2), Dallas.
711-‐00312
DFD to DB9 adaptor 711-‐00313 DFD to RJ45 adapter 711-‐00314 Cello 2 wire fuse harness
The harness provides power and ground connectivity only, for self/easy installations. The power wire is connected to a standard size fuse in the driver cabin for quick and easy installation. No ignition input is connected, thus, the user shall enable the Movement start/ Stop identification feature enabled in Cellocator FW V31 or later in order to detect & report movement status
711-‐00279
Cello 2 Wires mini fuse harness
The harness provides power and ground connectivity only, for self/easy installations. The power wire is connected to a mini size fuse in the driver cabin for quick & easy installation. No ignition input is connected, thus, the user shall enable the Movement start/ Stop identification feature enabled in Cellocator FW V31 or later in order to detect & report movement status.
711-‐00283
Harness KIT for Cello IQ 17 Wires
711-‐00315
DFD Driver Feedback Display provides visual and audible notifications intended for friendly Eco-‐driving coaching and real-‐time assistance to help improve the driver’s safety level.
715-‐50000