物質・化学系専攻...Effect of Molybdenium on Hardness of Low Temperature Plasma Carburized Austenitic Stainless Steel Tsujikawa, S. Noguchi, N. Ueda, N. Yamauchi, T. Sone Surface
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
1.学術論文、国際会議 Proc. ■ Dual Multi-Phase Intermetallic Alloys Composed of Geometrically Close-Packed Ni3X(X: Al, Ti, and V)Type Structures - Ⅰ. Microstructures and Their Stability Y. Nunomura, Y. Kaneno, H. Tsuda and T. Takasugi Acta Materialia, 54, 851-860(2006). ■ Dual Multi-Phase Intermetallic Alloys Composed of Geometrically Close-Packed Ni3X(X: Al, Ti, and V)Type Structures - Ⅱ. Mechanical Properties S. Shibuya, Y. Kaneno, M. Yoshida and T. Takasugi Acta Materialia, 54, 861-870(2006). ■ Phase Relation and Microstructure in Multi-Phase Intermetallic Alloys Based on Ni3Al-Ni3Nb-Ni3V Pseudo-Ternary Alloy System W. Soga, Y. Kaneno and T. Takasugi Intermetallics, 14, 170-179(2006). ■ Further Investigation on Phase Relation and Microstructures in Ni3Si-Ni3Ti-Ni3Nb Pseudo-Ternary Alloy System K. Ohira, Y. Kaneno, H. Tsuda and T. Takasugi Intermetallics, 14, 367-376(2006). ■ Phase Field and Room-Temperature Mechanical Properties of C15 Laves Phase in Nb-Hf-Cr and Nb-Ta-Cr Alloy System M. Fujita, Y. Kaneno and T. Takasugi Journal of Alloys and Compounds, 424, 283-288(2006). ■ High-Temperature Environmental Embrittlement of Thermomechanically Processed TiAl-Based Intermetallic Alloys Y. Hotta, Y. Kaneno, T. Takasugi and T. Tetsui Metallurgical and Materials Transactions A, 37A, 361-369(2006). ■ Study on the Effect of Crystallographic Texture on the Corrosion Behaviour of Pilgered Zirconium by Neutron Diffraction Y. Choi, E. J. Shin and H. Inoue Physica B, 385-386, 529-531(2006).
■ Microstructure and Texture Evolution during Cold Rolling and Annealing of Ni3Fe Alloy Y. Kaneno, A. Takahashi and T. Takasugi Materials Science and Engineering, A431, 328-338(2006). ■ Cold Rolling Texture of Ni-based L12 Ordered Intermetallic Alloys Y. Kaneno, A. Takahashi and T. Takasugi Materials Transactions, 47, 1485-1491(2006). ■ Texture Evolution during Hot-Rolling and Recrystallization in B2-Type FeAl, NiAl and CoTi Intermetallic Compounds Y. Kaneno, T. Yamaguchi and T. Takasugi Journal of Materials Science, 41, 6871-6880(2006). ■ Electric and Magnetic Properties of Ba(Co, Mn)O3-δ Epitaxial Films T. Inoue, T. Matsui, H. Tsuda, T. Yoshimura, N. Fujimura and K. Morii Transactions of the MRS Japan, 31, 193-196(2006). ■ Cold Rolled Mg-14mass%Li-1mass%Al Alloy and Its Friction Stir Welding M. Tsujikawa, Y. Abe, SW. Chung, S. Oki, K. Higashi, M. Kamita, I. Hiraki Materials Transactions, 47[4], 1077-1081(2006). ■ Effect of Molybdenium on Hardness of Low Temperature Plasma Carburized Austenitic Stainless Steel Tsujikawa, S. Noguchi, N. Ueda, N. Yamauchi, T. Sone Surface & Coatings Technology, available online Aug.(2006). ■ DLC Coating on Mg-Li Alloy N. Yamauchi, N. Ueda, M. Tsujikawa, T. Sone Surface & Coatings Technology, available online Aug.(2006). ■ DLC Film Coating on Plasma-curburized Austenitic Stainless Steel N. Ueda, N. Yamauchi, M. Tsujikawa, T. Sone Surface & Coatings Technology, Available online Aug.(2006).
■ Tolerance of Tool Position and Posture in FSW S. Oki, M. Tsujikawa, Y. Okawa, H. Takahara, S. W. Chung, K. Higashi 6th International Symposium on Friction Stir Welding, Saint-Sauveur, Nr Montreal, Canada - 10-12 October 2006, paper No. 43. ■ Fatigue Crack Growth in Mg Alloy FSW Joints M. Tsujikawa, S. Koizumi, T. Oguri, S. Oki, S. W. Chung, K. Higashi 6th International Symposium on Friction Stir Welding, Saint-Sauveur, Nr Montreal, Canada - 10-12 October 2006, paper No. 1. ■ High Strength Mg-Y-Zn Alloy by Friction Stir Processing M. Tsujikawa, T. Morishige, S. Oki, S. W. Chung, K. Higashi 6th International Symposium on Friction Stir Welding, Saint-Sauveur, Nr Montreal, Canada - 10-12 October 2006, paper No. 43. ■ Fracture Behavior of Niobium by Hydrogenation and Its Application for Fine Powder Fabrication Satoshi Semboshi, Naoya Masahashi, Toyohiko J. Konno, and Shuji Hanada Metallurgical and Materials Transactions A, Vol. 37 A, 1301-1309,(2006). ■ Pressure application effect of microstructure evolution in a composite steel of an iron aluminum alloy and a CrMo steel” Naoya Masahashi, Satoshi Semboshi, Toyohiko J. Konno and Shuji Hanada Alloy and compounds, Vol. 413, 281-288,(2006). ■ Transmission Electron Microscopy Observations on Cu-Mg Alloy Systems Ken-ichi Nishikawa, Satoshi Semboshi, Toyohiko J. Konno International Conference on New Frontiers of Process Science and Engineering in Advanced Materials(PSEA’05), Ed. by M. Naka, High Temperature Society of Japan, Kyoto International conference hall in Japan, pp. 103-108,(2006). ■ Fracture Behaviors of Niobium Alloys by Hydrogenation and Its Application for Fine Powder Fabrication Satoshi Semboshi, Toyohiko J. Konno, Naoya Masahashi, and Shuji Hanada THERMEC ’ 2006, International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS, in Vanceburg, Canada, pp. 539-543,
(2006). ■ In-situ TEM observation during heating and cooling in Ti-Nb-Sn shape memory alloys Takahiro Shirai, Satoshi Semboshi, Hiroaki Matsumoto, Toyohiko J. Konno, Naoya Masahashi, and Shuji Hanada The 16th International of Microscopy Congress( IMC 16) , Japanese Society of Microscopy, in Sapporo Conventional Center, pp. 1628,(2006). ■ Comparative Study on the Precipitation Behavior of Cu-Ti and Cu-Ti-Al Alloys Rimi Nishio, Satoshi Semboshi and Toyohiko J. Konno The 16th International of Microscopy Congress( IMC 16) , Japanese Society of Microscopy, in Sapporo Conventional Center, Japan, pp. 1659,(2006). ■ Powder Fabrication of Nb-Ti Alloys Using Hydrogenation Process Satoshi Semboshi, Toyohiko J. Konno, Naoya Masahashi, and Shuji Hanada 2006 Powder Metallurgy World Congress & Exhibition, in BEXCO, Busan, Korea, pp165-166,(2006). ■ Deformation Mechanism of Nanocrystalline Al-Fe Alloys by Analysis from Ab-Initio Calculations T. Uesugi, Y. Takigawa and K. Higashi Materials Science Forum, 503-504, 209-214(2006). ■ Compressive response of a closed-cell aluminum foam at high strain rate T. Mukai, T. Miyoshi, S. Nakano, H. Somekawa and K. Higashi Scripta Materialia, 54, 4, 533-537(2006). ■ Effect of manganese addition on strength and fracture toughness in Mg-6Al-1Zn alloy T. Sasaki, T. Uesugi, Y. Takigawa and K. Higashi Key Engineering Materials, 306-308, 857-862(2006). ■ マグネシウム合金のクラッド及びサンドイッチ化による高強度・高靭性化及び疲労特性
向上化技術 森 久史,野田雅史,森本文子,辻村太郎,東 健司,船見国男
材料, 55, 3, 348(2006). ■ Optimization of Die Material and its Surface Coating for Press Forming of Magnesium Alloy H. Okahara, M. Ohara, Y. Takigawa and K. Higashi Materials Transactions, 47, 4, 954-958(2006). ■ High Cycle Fatigue Property and Micro Crack Propagation Behavior in Extruded AZ31 Magnesium Alloys Y. Ochi, K. Masaki, T. Hirasawa, X. Wu, T. Matsumura, Y. Takigawa and K. Higashi Materials Transactions, 47, 4, 989-994(2006). ■ Tribological properties of hybrid process DLC coating against magnesium alloy T. Kumagai, K. Shimamura, H. Okahara, Y. Takigawa and K. Higashi Materials Transactions, 47, 4, 1008-1012(2006). ■ Optimization of Environmentally Friendly Anodic Oxide Film for Magnesium Alloys M. Hara, K. Matsuda, W. Yamaguchi, M. Sakaguchi, T. Yoshikata, Y. Takigawa and K. Higashi Materials Transactions, 47, 4, 1013-1019(2006). ■ Effect of Dopant on Phase Stability of Zirconia in Hot Water Y. Naka, Y. Takigawa, and K. Higashi Key Engineering Materials, 309-311, 1231-1234(2006). ■ Effect of Cation Dopant on Phase Stability of Zirconia Bioceramics in Hot Water Y. Takigawa, Y. Naka and K. Higashi Advances in Science and Technology, 49, 97-102(2006). ■ Effect of Coarse Grain by Secondary Recrystarization Growth for Strength on the Magnesium Alloy AZ31 H. Mori, M. Noda, T. Tsujimura, K. Funami and K. Higashi 日本金属学会誌, 70, 6, 521-523(2006). ■ Demonstration of an inverse Hall-Petch relationship in electrodeposited
nanocrystalline Ni-W alloys through tensile testing A. Giga, Y. Kimoto, Y. Takigawa and K. Higashi Scripta Materialia, 55, 2, 143-146(2006). ■ Flow and cavitation in a quasi-superplastic two-phase magnesium-lithium alloy M. Kawasaki, K. Kubota, K, Higashi and T. G. Langdon Materials Science and Engineering, A429, 334-340(2006). ■ Addition of an Aminic Antioxidant to a Hindered Easter-Based Heat Resisting Oil to Improve Lubrication for Press Forming of Magnesium Alloy Sheets E. Goto, T. Kachi, H. Okahara, Y. Takigawa and K. Higashi Materials Transactions, 47, 7, 1782-1787(2006). ■ Microstructural design for large superplastic elongations in aluminum-base materials containing particles H. Hosokawa and K. Higashi Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 37, 10, 2947-2953(2006). ■ High Corrosion and Weather Resistant Anionic Resin Coating for 2014 T6 Aluminum Alloys Which Maintains Mirror Luster M. Hara, K. Matsuda, T. Iwai, M. Kihara, W. Yamauchi, Y. Takigawa and K. Higashi Materials Transactions, 47, 11, 2786-2780(2006). ■ Fundamental study for development of new tool for Ti and its alloys M. Ikeda , S. Hasegawa, S. W. Chung, K. Higashi Proc. of the 6th International Symposium on Friction Stir Welding, 105(2006). ■ Silicon Caribide Base Ceramic Fiber Synthesis from Polycarbosilane-Polymethylsilane Blend Polymers by Melt Spinning M. Narisawa, K. Shimoda, M. Nishioka, T. Iseki, H. Mabuchi, K. Okamura, K. Oka and T. Dohmaru J. Ceram. Soc. Japan, 114, 6, 511-516(2006). ■ Synthesis and Characterization of Polymethylsilane Precursors Modified with Metal Chlorides
M. Narisawa, H. Tanno, M. Ikeda, T. Iseki, H. Mabuchi, K. Okamura, K. Oka, T. Dohmaru and D.-P. Kim, J. Ceram. Soc. Japan, 114, 6, 558-562(2006). ■ Design of Efficient TiO2/SiC Photocatalysts from TiC-SiC Nano Particles for Degradation of Organic Pollutants Diluted in Water H. Yamashita, Y. Nishida, O. Chiyoda, H. Nose, M. Narisawa, T. Ohmichi and I. Katayama Eco-Materials Processing & Design Ⅶ Materials Science Forum, 510-511, 9-12(2006). ■ Atmospheric corrosion of carbon steel under field exposure in the southern part of Vietnam T. T. N. Lan, N. T. P. Thoa, R. Nishimura, Y. Tsujino, M. Yokoi and Y. Maeda Corrosion Science, 48, 179-192(2006). ■ The effect of test temperature on SCC behavior of austenitic stainless steels in boiling saturated magnesium chloride solution M. Osama. Alyousif and R. Nishimura Corrosion Science, 48, 4283-4293(2006). ■ SCC behavior of austenitic stainless steels in boiling saturated magnesium chloride solutions: the effect of applied stress M. Osama. Alyousif and R. Nishimura Proc. of The 14th Asian-Pacific Corrosion Control Conference, 1-6(2006). ■ ノイズ抵抗の IR 補正 宮澤正純,井上博之 材料と環境,55,188-192(2006). ■ 電気化学インピーダンス法による塩酸を含むエタノール中での炭素鋼の腐食速度の推
定 宮澤正純,井上博之 材料と環境,55,306-311(2006). ■ Effect of hydrogen peroxide and dissolved oxygen on the corrosion rate of titanium in geological disposal environment H. Inoue, T. Lee, R. Nishimura
Corrosion 2006, Paper No. 06612(2006). ■ Critical hardness for HSC in deposit welding on steel line piles under cathodic protection. N. Oguchi, J. Sakai, H. Inoue, S. Komukai Proceedings of IPC 2006, 6th International Pipeline Conference, IPC2006-10227(2006). ■ Sonochemically synthesized core-shell structured Au-Pd nanoparticles supported on γ-Fe2O3 particles H. Nitani, M. Yuya, T. Ono, T. Nakagawa, S. Seino, K. Okitsu, Y. Mizukoshi, S. Emura, T. A. Yamamoto J. Nanoparticle Res., 8, 951-958(2006). ■ Acoustic Multi-Bubble Cavitation in Water: A New Aspect of the Effect of Rare Gas Atmosphere on Bubble Temperature and its Relevance to Sonochemistry K. Okitsu, T. Suzuki, N. Takenaka, H. Bandow, R. Nishimura, Y. Maeda J. Phys. Chem. B, 110, 20081-20084(2006). ■ 水中有機塩素化合物の低エネルギー超音波分解速度に対する添加遷移金属粉末と超音
波周波数の影響 興津健二,吉岡雄一郎,田辺秀二 分析化学, 55, 567-572(2006). ■ Hydrazine degradation by ultrasonic irradiation H. Nakui, K. Okitsu, Y. Maeda, R. Nishimura Proceedings of Environmental Applications of Advanced Oxidation Processes, 1st European Conference CD-ROM(2006). ■ Sonochemical degradation and reaction kinetics of organic acid in aqueous solution K. Okitsu, K. Kawasaki, B. Nanzai, H. Nakui, H. D. Hanh, R. Nishimura, N. Takenaka, H. Bandow Proceedings of Environmental Applications of Advanced Oxidation Processes, 1st European Conference CD-ROM(2006). ■ Transesterification of triolein with ethanol using low frequency ultrasonic irradiation
H. D. Hanh, N. T. Dong, K. Okitsu, Y. Maeda, R. Nishimura Proceedings of the 9th Western Pacific Acoustics Conference(WESPAC IX 2006), CD-ROM(2006). ■ Alcoholysis of triolein by ultrasonic energy H. D. Hanh, N. T. Dong, K. Okitsu, Y. Maeda, R. Nishimura Renewable Energy 2006 Proceedings, CD-ROM, 1222-1224(2006). ■ Test temperature dependence of transesterification of triolein by ultrasonic energy H. D. Hanh, N. T. Dong, K. Okitsu, Y. Maeda, R. Nishimura Proc. Symp. Ultrason. Electron., 27, pp. 469-470(2006). ■ Nano-size Cu cluster formation in iron by Cu ion implantations F. Hori, S. Tanaka, E. Kuramoto, A. Iwase Nucl. Instr. Meth B 245 180-183(2006). ■ Synthesis of Au Nano-particles under Energetic Irradiation Fields N. Maeda, T. Hiroki, F. Hori, S. Okuda, R. Taniguchi, T. Kojima, T. Kambara, T. Abe and A. Iwase Mater. Res. Soc. Symp. Proc.(2006). ■ Relaxation process in Zr-Cu-Al bulk metallic glasses by positron annihilation F. Hori, T. Yano, Y. Yokoyama, and T. J. Konno J. Alloys & Compounds, online available(2006). ■ Electronic excitation effects in CeO2 under irradiations with high-energy ions of typical fission products T. Sonoda, M. Kinoshita, Y. Chimi Y, A. Iwase, N. Ishikawa Nucl. Instr. Meth. B250: 254-258(2006). ■ Observation of ion-irradiation induced diffusion in Pd-Si system using synchrotron radiation X-ray photoelectron spectroscopy A. Iwase, Y. Chimi, N. Ishikawa, A. Iwase Nucl. Instr. Meth B245 141-144(2006). ■ Effects of swift heavy ion irradiation on magnetic properties of Fe-Rh alloy
M. Fukuzumi, Y. Chimi, N. Ishikawa, A. Iwase Nucl. Instr. Meth. B245 161-165(2006). ■ Effect of high-energy ion irradiation on magnetic properties in Fe-Pt invar alloys F. Ono, A. Kanamitsu Y. Matsushima, A. Iwase Nucl. Instr. Meth. B245 166-170(2006). ■ Swift heavy ion irradiation effects in nanocrystalline gold Y. Chimi, A. Iwase, N. Ishikawa Nucl. Instr. Meth. B245 171-175(2006). ■ Pressure dependence of the irradiation-induced ferromagnetism in Fe-Ni invar alloys Y. Matsushima, NQ. Sun, H. Kanamitsu, A. Iwase, F. Ono J. MAG MAG MATERIALS 298 14-18(2006). ■ チタンの陽極酸化による P ドープ TiO2 の合成と評価 中平 敦,小西 功一,横田 光司,本間 徹生,有谷 博文,田中 勝 Journal of the Ceramic Society of Japan, 114,46-50(2006). ■ 磁場を用いたコラーゲン配向による骨形成の基礎研究 篠原 肇,武井 光,斎藤 大輔,小谷 誠,上野照剛,中平 敦 Journal of the Ceramic Society of Japan, 114, 131-134(2006). ■ 磁気ベクトルを用いた環境中の内分泌撹乱化学物質除去のための磁性活性炭の合成, 中平 敦,西田成樹,福西興至 Journal of the Ceramic Society of Japan, 114,135-137(2006). ■ Mo LIII-edge XANES Study of Catalytically Active Mo Species on Silica-Alumina Supports for Methane Dehydroaromatization, H. Aritani, S. Shinohara, S. Koyama, K. Ohtsuki, T. Kubo, A. Nakahira Chemistry Letters Vol. 35 No. 4, pp416-417(2006). ■ 水熱法による H-Ti-O ナノチューブ合成と構造評価 久保 敬,本間徹生,梅咲正則,中平 敦 材料、55, No. 7, 666-669(2006).
■ Synthesis and Characterization of Bulky FSM with Interconnected Mesopore-Networks Using an HHP Method, Mari Takimura, Hidezumi Nagata, Yuki Yamasaki,Yuichi Ikuhara, Toshiyuki Suzuki, Atsushi Nakahira Journal of the Ceramic Society of Japan, 114, 554-557(2006). ■ Preparation of Ce-ZrO2 based Composites and Effect of Addition of 3Y-ZrO2 on Their Microstructures A. Nakahira, M. Ohta, T. Murakami, and T. Kudo, Key Engineering Material, Vols. 317-318, 89-95(2006). ■ Effect of additives on hydrolysis of Ti alkoxide and microstructural observation of TiO2 A. Nakahira, Y. Fujita, T. Kubo, S. Eguchi, S. Nishidsa, T. Issiki, Key Engineering Material, Vols. 317-318, 89-92(2006). ■ Syntheses of bulky Y-zeolite by hydrothermal hot-pressing(HHP)technique S. Takezoe, K. Hosoi, M. Tajika, Y. Yamasaki, and A. Nakahira, Key Engineering Material, Vols. 317-318, 97-100(2006). ■ Synthesis of nanotubular titanate from titanium using hydrothermal treatments T. Kubo, W. Kato, Y. Yamasaki, A. Nakahira, Key Engineering Material, Vols. 317-318, 247-250(2006). ■ Praparation of porous hydroxyapatite using extrusion of PAN M. Ohta, M. Tajika, A. Nakahira, Key Engineering Material, Vols. 317-318, 765-768(2006). ■ Transmission Electron Microscopic Study on Thermal Decomposition Process of Calcium-Deficient Hydroxyapatite M. Tamai, K. Nishio, T. Isshiki and A. Nakahira, Key Engineering Material, Vols. 317-318, 785-788(2006). ■ Arsenic Removal by Hydroxyapatite-based Ceramics Atsushi Nakahira, Toshihiro Okajima, Tetsuo Honma, Satoshi Yoshioka, and Isao
Tanaka, Chemistry Letters, Vol. 35, No. 8, pp. 856-857(2006). ■ Ce and Y Local Structures of High-performance ZrO2 Composites Codoped with Ce and Y for Implant Applications Atsushi Nakahira, Takayuki Murakami, Mitsuhiko Ohta, Tetsuo Honma, and Takahiro Kudo,Chemistry Letters, Vol. 35, No. 8, pp. 874-875(2006). ■ Syntheses and Characterization of Bulky Mesoporous Silica by Hydrothermal Hot-pressing Method Hizezumi Nagata, Mari Takimura,, Yuki Yamasaki, and Atsushi Nakahira Materials Transaction, 47[8], 2103-2105(2006). ■ Fabrication and Evaluation of High Performance 12Ce-ZrO2/3Y-ZrO2 Composites for an Implant A. Nakahira, T. Murakami, T. Kudo, T. Matsushita and T. Honma, Journal of the Ceramic Society of Japan, 114[11],1076-1080(2006). 2.解説,総説 ■ 第 14 回材料集合組織国際会議(ICOTOM 14) 井上博史 軽金属, 56, 73-74(2006). ■ レーザ光を利用したトライボコーティング技術の開発 日野 実,平松 実,辻川正人 月刊トライボロジー, 20, 7, 156-158(2006). ■ 新規の Nb 合金型固体コンデンサーの開発 (Development of advanced electrode materials for electrolytic capacitors) 千星 聡 近畿地方発明センター平成 17 年度研究助成報告書, pp. 1-6,(2006).
■ Fe-Al 合金/CrMo 鋼拡散接合材の組織形成に及ぼす HIP 圧力印加の効果 正橋直哉,千星 聡,今野豊彦,花田修治 材料開発のための顕微鏡法と応用写真集,[編集・発行](社)日本金属学会編,[発売](株)
間渕 博 機械の研究, 58, 455-459(2006). ■ Organic-to-Inorganic Conversion Process for Polymer-Derived Ceramics - Preface Y. Sugahara, Y. Iwamoto, M. Narisawa J. Ceram. Soc. Japan, 114, 6, preface(2006). ■ 腐食計測 ―コロージョンセミナ Q&A 井上博之 材料と環境, 55, 296-297 ■ 超音波の誘起するキャビテーションバブル反応場の物理的・化学的評価法 興津健二 水処理技術誌, 47, 23-26(2006). ■ Defect study for FeAl intermetallic alloys after electron irradiation F. Hori, M. Murota, A. Iwase, Q. Xu and T. Yoshiie KURRI Progress Report2005, Kyoto University,(2006). ■ 高エネルギー重イオン照射場におかれた無機材料の挙動 岩瀬彰宏,石川法人,知見康弘 金属学会報, まてりあ, 第 45 巻, 456-463(2006). ■ 水熱合成 HTiO ナノチューブの構造評価と特性 中平 敦,久保 敬 19[8], 24-29(2006). 3.学術著書 ■ 球状炭化物材料 津田 大,松井利之,間渕 博,森井賢二(分担執筆) 球相材料研究会, 日刊工業新聞社, 233-244(2006).
■ エコマテリアルハンドブック 高杉隆幸(分担執筆) 丸善, 97-99(2006). ■ 降伏強度と組織研究会報告書Ⅰ ―解説・レビュー編― 井上博史(分担執筆) 日本鉄鋼協会, 21-27(2006). ■ 材料開発のための顕微鏡法と応用写真集 金野泰幸,津田 大,高杉隆幸(分担執筆) 日本金属学会, 165(2006). ■ Corrosion and Electrochemistry of Advanced Materials, in Honor of Koji Hashimoto R. Nishimura and A. Sulaiman(分担執筆) Editors S. Fujimoto, H. Habazaki, E. Akiyama and B. MacDougall, ECS Transaction, Vol. 1, No. 4, pp. 401-411(2006). 4.国際会議発表 ■ International Conference on New Frontiers of Process Science and Engineering in Advanced Materials(PSEA’05), Ed. by M. Naka, High Temperature Society of Japan,(Kyoto, Japan, January, 2006) Ken-ichi Nishikawa, Satoshi Semboshi, Toyohiko J. Konno, Transmission Electron Microscopy Observations on Cu-Mg Alloy Systems. ■ Handai Nanoscience and Nanotechnology International Symposium(Osaka, Japan, January, 2006) S. Tanaka, F. Hori, T. Akita, M. Kohyama First-principles calculations of Au-Pd core-shell nanoparticles ■ Corrosion 2006, NACE 65th Annual Conference(San Diego, USA, March, 2006)
H. Inoue, T. Lee, R. Nishimura Effect of hydrogen peroxide and dissolved oxygen on the corrosion rate of titanium in geological disposal environment. ■ International Workshop on Science and Engineering for Evolution of Valuable Resources and Energy from Organic Wastes(Osaka, Japan, March, 2006) H. D. Hanh, N. T. Dong, K. Okitsu, Y. Maeda, R. Nishimura Biodiesel production from triolein with short chain alcohols using low frequency ultrasonic irradiation. M. Iwatani, K. Okitsu, R. Nishimura, Y. Maeda Sonochemical reduction of hazardous inorganic metal ions of MnO-4 in aqueous solution and preparation of MnO2 particles. T. Takeda, I. Oyane, M. Furuta, K. Okitsu, R. Nishimura, Y. Maeda The effect of sonochemical decomposition products of toxic compounds on the growth of Saccharomyces cervisiae A50. K. Okitsu, T. Suzuki, N. Takenaka, H. Bandow, R. Nishimura, Y. Maeda Estimation of cavitation bubble temperature. K. Date, K. Okitsu, H. Bandow, R. Nishimura, Y. Maeda Sonochemical degradation and reaction kinetics of aromatic compounds in aqueous solution. ■ 8th International Cnference on Advanced urface Engineering(Tokyo, Japan, April, 2006) Makoto Hino, Koji Murakami, Minoru Hiramatsu, Masato Tsujikawa Preparation of Ni-PSiC/PTFE Multilayer Coatings and Thier Tribological Properties. ■ U.S-Japan Joint Workshop on Hybrid Materials and Nanostructures NANO2006(Pacific Grove, USA, May, 2006) M. Narisawa, K. Kita, R. Mori, H. Mabuchi and M. Itoh Synthesis of Silicon Carbide Tubes from Polycarbosilane - Polysiloxane Blend Polymers with Using Nano-Micro Scale Phase Separation.
■ International Workshop on Designing of Interfacial Structures in Advanced Materials and their Joints(DIS’06)(Osaka, Japan, June, 2006) T. Takasugi and Y. Kaneno Development of Multi-Phase Intermetallic Alloy Composed of Ni3X-Type Structures. ■ International Academic Research Conference~A collection of special lectures from the Faculty Innovation Research Project, Graduate School of Engineering, Osaka Prefecture University(Sakai, Japan, June, 2006) Y. Kaneno Mechanical properties of cold-rolled thin foils of L12-type polycrystalline intermetallic alloys. ■ 11th International Conferences on Modern Materials and Technologies Acireale(Sicily, Italy, June, 2006) Y. Takigawa, Y. Naka and K. Higashi Effect of Cation Dopant on Phase Stability of Zirconia Bioceramics in Hot Water. ■ 9th International Conference on Superplasticity in Advanced Materials; ICSAM 2006(ChengDu, China, June, 2006) T. Uesugi, Y. Inoue, Y. Takigawa and K. Higashi First-principles calculations of grain boundary γ-surface for various grain boundaries with different energies in aluminum. Y. Takigawa, H. Takadama and K. Higashi Superplastic joining of TZP enhanced by titania-doping in the insert material. A. Kushibe, Y. Takigawa, K. Higashi, K. Aoki, K. Makii and T. Takagi Application of high-strain-rate superplastic Zn-Al alloy to seismic dampers and its optimised shape design. ■ 10th Meeting of the European Society of Sonochemistry(Hamburg, Germany, June, 2006) K. Okitsu, M. Ashokkumar, F. Grieser Sonochemical Synthesis of Size Controlled Gold Nanoparticles. ■ The 9th Western Pacific Acoustics Conference(WESPAC IX 2006)(Seoul, Korea,
June, 2006) H. D. Hanh, N. T. Dong, K. Okitsu, Y. Maeda, R. Nishimura Transesterification of triolein with ethanol using low frequency ultrasonic irradiation. ■ International Conference on Processing & Manufacturing of Advanced Materials(THERMEC’2006)(Vancouver, Canada, July, 2006) H. Inoue, K. Asao, M. Ishio and T. Takasugi Texture Evolution during Diffusional Heat Treatment from Roll-Bonded Ti/Ni Laminates to TiNi Shape Memory Alloy Sheets. H. Takahara, Y. Motoyama, M. Tsujikawa, S. Oki, S. W. Chung, K. Higashi ALLOWANCE OF DEVIATION AND GAP IN BUTT JOINTS ON FRICTION STIR WELDING. S. Oki, Y. Okawa, M. Tsujikawa, Y. Marutani, K. Higashi INFLUENCE OF CONTINEOUS TRANSVERSAL INCLINATION OF TOOL ON FSW JOINTS. T. Morishige, M. Tsujikawa, S. Oki, M. Kamita, S.W. Chung, K. Higashi FRICTION STIR PROCESSING OF CAST Mg-Y-Zn ALLOY. M. Tsujikawa, D. Azuma, M. Hino, H. Kimura, K. Yubuta, A. Inoue FRICTION AND WEAR OF LASER IRRADIATED BULK METALLIC GLASS. M. Tsujikawa, Y. Abe, S. Oki, M. Kamita, K. Higashi FRICTION STIR WELDING OF Mg-14mass%Li ALLOY. S .Koizumi, M. Tsujikawa* T. Oguri, K. Higashi Two Pass FSW Joint of Magnesium Alloy. Satoshi Semboshi, Toyohiko J. Konno, Naoya Masahashi, and Shuji Hanada Fracture Behaviors of Niobium Alloys by Hydrogenation and Its Application for Fine Powder Fabrication. T. Uesugi, Y. Takigawa and K. Higashi First principles calculations of size factors and enthalpies of solution as parameters
considering of metallic glass formability. Y. Takigawa, J. Kobata, S.W. Chung and K. Higashi Friciton stir processing on Zr-base bulk metallic glass. ■ 14th International Conference on Positron Annihilation,(Hamilton, Canada, July, 2006) F. Hori, T. Kojima, S. Tanaka, T. Akita, T. Iwai, T. Onitsuka, N. Taguchi and A. Iwase Characterization of sonochemically synthesized Au-Pd nanoparticles by using slow positron beam. F. Hori, M. Fukuzumi, A. Kawasuso, Y. Zushi, Y. Chimi, N. Ishikawa, A. Iwase Characterization of swift heavy ion-induced defects in Fe-Rh alloy by using positron beam technique. ■ International Conference on Atomic Collisions in Solids(ICACS2006)(Berlin, Germany, July, 2006) A. Iwase, M. Fukuzumi, Y. Zushi, M. Suzuki, M. Takagaki, N. Kawamura, Y. Chimi, N. Ishikawa, J. Mizuki, F. Ono Study on irradiation-induced magnetic transition in FeRh alloys by means of Fe K-edge XMCD spectroscopy. Y. Zushi, M. Fukuzumi, Y. Chimi, , N. Ishikawa, T. Kambara, R. Neumann, A. Iwase Ion-species dependence of swift heavy ion-induced ferromagnetism of FeRh at low temperatures. ■ Engineering Plasticity and Its Applications, AEPA2006(Nagoya, Japan , September, 2006) T. Hirata, T. Oguri, H. Hagino, T. Tanaka, S. W. Chung, M. Tsujikawa, Y. Takigawa, K. Higashi Formability of Friction Stir Welded and Arc Welded 5083 Aluminum Alloy Sheets. ■ The Second International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materias, and Joing Technology for New Metalic Glass and Inorganic Materials, ICCCI2006,(Kurashiki, Japan, September, 2006) Masato Tsujikawa, Shin-ichiro Adachi, Sachio Oki, Kazuhiro Nakata, Masaichiro
Kamita PLASMA THERMAL DEPOSITION OF ALMINUM ON Mg-Li WORK HARDENED ALLOY. ■ Tenth International Conference on Plasma Surface Engineering, PSE2006,(Garmisch-Partenkirchen, Germany, September, 2006) M. Tsujikawa, S. Adachi, Y. Abe, S. Oki, K. Nakata, M. Kamita Corrosion Protection of Mg-Li Alloy by Plasma Thermal Spraying of Aluminum. M. Tsujikawa, S. Noguchi, N. Yamauchi, N. Ueda, A. Okamoto, T. Sone Acceleration of Carbon Diffusion by Molybdenum in Low-Temperature Plasma Carburizing of Austenitic Stainless Steel. ■ The 16th International of Microscopy Congress,(Sapporo, Japan, September, 2006) Rimi Nishio, Satoshi Semboshi and Toyohiko J. Konno Comparative Study on the Precipitation Behavior of Cu-Ti and Cu-Ti-Al Alloys. Takahiro Shirai, Satoshi Semboshi, Hiroaki Matsumoto, Toyohiko J. Konno, Naoya Masahashi, and Shuji Hanada In-situ TEM observation during heating and cooling in Ti-Nb-Sn shape memory alloys. H. Tsuda, H. Mori, T. Matsui, H, Mabuchi and K. Morii Precipitation of Ti in TiC Particles of Ti Matrix Composites from Ti-C-N System Powder Mixture Using Reactive Arc-melting. H. Nishizawa, F. Hori and R. Oshima In-situ HRTEM Observation of Surface Melting of Boron Dope Silicon. ■ 2006 Powder Metallurgy World Congress & Exhibition,(Busan, Korea, September, 2006) Satoshi Semboshi, Toyohiko J. Konno, Naoya Masahashi, and Shuji Hanada Powder Fabrication of Nb-Ti Alloys Using Hydrogenation Process. ■ The 8th Asia-Pacific Symposium on Engineering Plasticity and Its Applications; AEPA 2006(Nagoya, Japan, September, 2006) T. Tanaka, T. Hirata, Chung Sung Wook, Y. Takigawa and K. Higashi
Superplastic Properties and Microstructure of Friction Stir Welded Joints of Zn-22Wt. %Al Alloy. T. Naka, M. Hayakashi, Y. Nakayama, T. Uemori, M. Kohzu, K. Higashi and F. Yoshida Effect of Strain Rate and Temperature on Yield Locus for AZ31 Magnesium Alloy Sheet. ■ International Conference on Ion Beam Modification in Materials(IBMM2006)(Italy, September, 2006) Shou Nakagawa, Y. Chimi, N. Ishikawa, M. Kitagawa, R. Oshima, T. Tobita, R. Taniguchi, M. Suzuki, F. Hori, A. Iwase Local modification of hardness in FeCu alloys by using swift heavy ion irradiation. Y. Chimi, N. Ishikawa, A. Iwase, F. Ono Modification of magnetic properties in FeNi alloy thin films induced by energetic ion irradiation. ■ IPC2006, 6th International Pipeline Conference(Calgary, September, Canada, 2006) N. Oguchi, J. Sakai, H. Inoue, S. Komukai Critical hardness for HSC in deposit welding on steel line piles under cathodic protection. ■ Environmental Applications of Advanced Oxidation Processes, 1st European Conference(Chania, Greece, September, 2006) H. Nakui, K. Okitsu, Y. Maeda, R. Nishimura Hydrazine degradation by ultrasonic irradiation. K. Okitsu, K. Kawasaki, B. Nanzai, H. Nakui, H. D. Hanh, R. Nishimura, N. Takenaka, H. Bandow, Sonochemical degradation and reaction kinetics of organic acid in aqueous solution. ■ The IUMRS International Conference in Asia 2006(IUMRS-ICA-2006)meeting(Korea, September, 2006) H. Murase, A. Nakahira, Synthesis of LDH-type clays substituted with Fe ion and its application for purification of polluted water.
H. Murase, S.Shio,A. Nakahira, Synthesis and evaluation of hollow-tubular ZnO by wet chemical method. M. Takimura, H. Nagata, Y. Yamasaki, A. Nakahira Synthesis of Dense Mesoporous Silica with High Surface Area. T. Kubo, Y. Yamasaki, T. Suzuki, Y. Ikuhara, A. Nakahira Synthesis and Evaluation of Pt-Entrapped Titanate nanotubes. T. Kubo, Y. Yamasaki, A. Nakahira Fabrication of Bulky Titanate Nanotubes Using Hydrothermal Hot-pressing and Its Evaluation. ■ GOLD2006: New Industrial Applications for Gold,(Limerick, Ireland, September, 2006) S. Tanaka, F. Hori, T. Akita, M. Kohyama Atomic and electronic structures of binary Au-Pd core-shell nanoparticles ■ 6th International Symposium on Friction Stir Welding(Saint-Sauveur, Nr Montreal, Canada, October, 2006) S. Oki1, M. Tsujikawa, Y. Okawa, H. Takahara, S. W. Chung, K. Higashi Tolerance of Tool Position and Posture in FSW. M. Tsujikawa, S. Koizumi, T. Oguri, S. Oki, S. W. Chung4, K. Higashi Fatigue Crack Growth in Mg Alloy FSW Joints M. Tsujikawa1, T. Morishige, S. Oki, S. W. Chung, K. Higashi High Strength Mg-Y-Zn Alloy by Friction Stir Processing ■ The Fifth International Conference on Bulk Metallic Glasses, BMG V,(Awaji, Japan, Oct, 2006) M. Tsujikawa, R. Ikutomo, M. Hino, H. Kimura, K. Yubuta, A. Inoue WEAR OF BULK METALLIC GLASS IN DRY SLIDING FRICTION Y. Takigawa, J. Kobata, S. W. Chung, H. Tsuda and K. Higashi Microstructural Change by Friction Stir Processing in ZrCuAlNi Bulk Metallic Glass.
T. Nasu, T. Usuki, M. Sakurai, S. Wei, Y. Takigawa, K. Higashi, W. Zhong and A. Inoue EXAFS Study on Micromechanism of Tensile Deformation of Metallic Glass. T. Uesugi and K. Higashi Enthalpies of solution of Mg-based binary alloys calculated from the first principles. J. Kobata, Y. Takigawa, H. Tsuda and K. Higashi Deformation and Failure Behaviour of PreAnnealed ZrAlNiCu Bulk Metallic Glass in a Supercooled Liquid Region. T. J. Konno, F. Hori and Y. Yokoyama Relaxation and crystallization behavor of the Zr50Cu40Al10 metallic glass ■ Conference on Material Science and Technology 2006(USA, 2006) T. Sonoda, Y. Chimi, N. Ishikawa, M. Sataka, A. Iwase Formation and accumulation effects of ion tracks in CeO2. ■ The 14th Asian-Pacific Corrosion Control Conference(Shanghai, China, October, 2006) M. Osama. Alyousif and R. Nishimura SCC behavior of austenitic stainless steels in boiling saturated magnesium chloride solutions: the effect of applied stress. ■ Renewable Energy 2006 International conference and exhibition(Makuhari, Japan, October, 2006) H. D. Hanh, N. T. Dong, K. Okitsu, Y. Maeda, R. Nishimura Alcoholysis of triolein by ultrasonic energy. ■ The 6th International Symposium on Friction Stir Welding,(Canada, November, 2006) M. Ikeda, S. Hasegawa, S. W. Chung, K. Higashi Fundamental study for development of new tool for Ti and its alloys. ■ MRS 2006 Fall Meeting(Boston, USA, November, 2006) T. Takasugi and Y. Kaneno
Development of Dual Multi-Phase Intermetallic Alloys Composed of Geometrically Close Packed Ni3X(X:Al and V)Structures. T. Takasugi, Y. Kaneno and H. Tsuda Microstructural Evolution of Dual Multi-Phase Intermetallic Alloys Composed of GCP Ni3Al and Ni3V Phases Containing Ti. Y. Kaneno, T. Takasugi, M. Yoshida and H. Tsuda Room Temperature Ductility of B2-Type CoZr Intermetallic Compounds. Y. Kaneno, T. Takasugi and T. Myoki Tensile Property of Cold-Rolled Foils of Ni-Based and Co-Based L12 Intermetallic Alloys. W. Soga, Y. Kaneno and T. Takasugi Microstructure and Mechanical Properties of Dual Multi-Phase Intermetallic Alloys Composed of GCP Ni3Al and Ni3V Phases containing Nb. M. Fujita, Y. Kaneno and T. Takasugi Microstructure and Mechanical Properties of Multi-Phase Intermetallic Alloys Composed of GCP Ni3X(X: Si, Ti and Nb)Phases. T. Akita, T. Hiroki, S. Tanaka, T. Kojima, M. Kohyama, A. Iwase, F. Hori Analytical TEM observation of Au-Pd nanoparticles prepared by sonochemical method. ■ New Cross-over Project Workshop-3(Tokyo, December, 2006) Akihiro Iwase Study on Ion-Irradiation Effects of CeO2 by Using X-ray Absorption Spectroscopy At Synchrotron Radiation Facilities. ■ The 3rd International Symposium on Advanced Ceramics(Singapore, December, 2006) K. Kita, M. Narisawa, H. Mabuchi and M. Itoh Melt Spinnable Blend Polymers of Polycarbosilane and Polysiloxane for Synthesis of Silicon Carbide Micro Tube Structures. ■ 13Th Asian Symposium on Ecotechnology(Toyama, Japan, December, 2006)
H. D. Hanh, N. T. Dong, K. Okitsu, Y. Maeda, R. Nishimura Integrated biodiesel production by means of ultrasonic energy: a comparison between different homogeneous catalysts. ■ 4th Asia Pacific Congress on Catalysis,(Singapore, December, 2006) T. Akita, T. Hiroki, S. Tanaka, T. Kojima, M. Kohyama, A. Iwase and F. Hori, Analytical TEM observations of Au-Pd core-shell particles prepared by sonochemical techniques. 5.学術講演発表 ■ 軽金属学会関西支部 若手研究者・院生による研究発表会(1 月, 大阪) 金野泰幸,高杉隆幸 TiAl 基金属間化合物の引張特性に及ぼす環境因子の影響 水谷清志,井上博史,高杉隆幸,石尾雅昭 AZ31Mg/Ti 複合板の集合組織と機械的性質に及ぼすプロセス条件の影響 今藤敏和,金野泰幸,高杉隆幸 TiAl 基金属間化合物の低サイクル疲労特性に及ぼす試験環境の影響 ■ 日本鉄鋼協会第 9 回降伏強度と組織研究会(1 月, 名古屋) 井上博史,濱田純一,後藤時政 フェライトおよびオーステナイト単一組織ステンレス鋼板における降伏強度と集合組織の