-
Quality
Aggregate Blocks
CCP Group manufactures its Aggregate Blocks under a quality
assurance system in accordance with EN ISO 9001. All of our Blocks
meet the requirements of BS EN 771-3.
CE marking
All of our category II Aggregate Blocks are covered by CE
certification. CE marking denotes conformity to BS EN 771-4 and 3
respectively and all our Aggregate Blocks sold within the UK will
have to be CE marked before July 2013. As it is not practical to
stamp every block produced with the CE mark, our certificates are
available to download. See below.
-
CCP GROUP OF COMPANIES. Cheshire Concrete Products Ltd
Clywd Concrete Products Ltd Llay Road
Llay Wrexham LL12 0TL
BS EN 771-3:2011
12
Consolite (500000 65mm Dense Coursing Brick) 21
Category II 215 x 100 x 65mm aggregate concrete masonry
units
Dimensions: 215 (mm) x 100 (mm) x 65 (mm) Dimensional Tolerances
:
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength:
Dimensional Stability:
Mean 21N/mm2 [ bed face] moisture movement: < 0.55mm/m
Shear bond strength: Fixed Value 0.15 N/mm2 Flexural bond
strength: NPD Reaction to fire: Euroclass A1 Water Absorption:
NPD
Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1990kg/m3 Configuration: As Above
Thermal conductivity: 0.99W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
-
CCP GROUP OF COMPANIES. Cheshire Concrete Products Ltd
Clywd Concrete Products Ltd Llay Road
Llay Wrexham LL12 0TL
BS EN 771-3:2011
12
Modulite (400000 LWT 65mm Coursing Brick) 10.4
Category II 440 x 100 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 100 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength:
Dimensional Stability:
Mean 10.4N/mm2 [ bed face] moisture movement: < 0.55mm/m
Shear bond strength: Fixed Value 0.15 N/mm2 Flexural bond
strength: NPD Reaction to fire: Euroclass A1 Water Absorption:
NPD
Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1500kg/3 Configuration: As Above
Thermal conductivity:Dangerous Substances:
0.36W/m.K [10,dry] See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
-
CCP GROUP OF COMPANIES. Cheshire Concrete Products Ltd
Clywd Concrete Products Ltd Llay Road
Llay Wrexham LL12 0TL
BS EN 771-3:2011
12
Consolite (351410. Solid Dense) 7.3
Category II 440 x 100 x 215 mm aggregate concrete masonry units
Dimensions: 440 (mm) x 100 (mm) x 215 (mm) Dimensional Tolerances
:
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength: Mean
7.3N/mm2 [ bed face] Dimensional Stability: moisture movement: <
0.55mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural bond
strength: NPD Reaction to fire: Euroclass A1 Water Absorption:
NPD
Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1990kg/m3 Configuration: As Above
Thermal conductivity: 0.99W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
-
CCP GROUP OF COMPANIES. Cheshire Concrete Products Ltd
Clywd Concrete Products Ltd Llay Road
Llay Wrexham LL12 0TL
BS EN 771-3:2011
12
Consolite (351310. Solid Dense) 7.3
Category II 440 x 75 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 75 (mm) x 215 (mm) Dimensional Tolerances
:
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength: Mean
7.3N/mm2 [ bed face] Dimensional Stability: moisture movement: <
0.55mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural bond
strength: NPD Reaction to fire: Euroclass A1 Water Absorption:
NPD
Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1990kg/m3 Configuration: As Above
Thermal conductivity: 0.99W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
-
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
BS EN 771-3:2011
12
Consolite (351410. Solid Dense) 7.3
Category II 440 x 100 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 100 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength: Mean
7.3N/mm2 [ bed face] Dimensional Stability: moisture movement: <
0.55mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural bond
strength: NPD Reaction to fire: Euroclass A1 Water Absorption:
NPD Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1990kg/m3 Configuration: As Above
Thermal conductivity: 0.99W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
-
BS EN 771-3:2011
12
Consolite (151610. Solid Dense) 7.3
Category II 440 x 140 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 140 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength: Mean
7.3N/mm2 [ bed face] Dimensional Stability: moisture movement: <
0.55mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural bond
strength: NPD Reaction to fire: Euroclass A1 Water Absorption:
NPD Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1990kg/m3 Configuration: As Above
Thermal conductivity: 0.99W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
-
BS EN 771-3:2011
12
Consolite (151420 Solid Dense) 10.4
Category II 440 x 100 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 100 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength: Mean
10.4N/mm2 [ bed face] Dimensional Stability: moisture movement:
< 0.55mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural
bond strength: NPD Reaction to fire: Euroclass A1 Water
Absorption:
NPD Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1990kg/m3 Configuration: As Above
Thermal conductivity: 0.99W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
-
BS EN 771-3:2011
12
Consolite (151620. Solid Dense) 10.4
Category II 440 x 140 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 140 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength: Mean
10.4N/mm2 [ bed face] Dimensional Stability: moisture movement:
< 0.55mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural
bond strength: NPD Reaction to fire: Euroclass A1 Water
Absorption:
NPD Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1990kg/m3 Configuration: As Above
Thermal conductivity: 0.99W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
-
BS EN 771-3:2011
12
Consolite ( 151430. Solid Dense) 17.5
Category II 440 x 100 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 100 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength: Mean
17.5N/mm2 [ bed face] Dimensional Stability: moisture movement:
< 0.55mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural
bond strength: NPD Reaction to fire: Euroclass A1 Water
Absorption:
NPD Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1990kg/m3 Configuration: As Above
Thermal conductivity: 0.99W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
-
CCP GROUP OF COMPANIES. Cheshire Concrete Products Ltd
Clywd Concrete Products Ltd Llay Road
Llay Wrexham LL12 0TL
BS EN 771-3:2011
12
Consolite ( 151630. Solid Dense) 17.5
Category II 440 x 100 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 100 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength: Mean
17.5N/mm2 [ bed face] Dimensional Stability: moisture movement:
< 0.55mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural
bond strength: NPD Reaction to fire: Euroclass A1 Water Absorption:
NPD
Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1990kg/m3 Configuration: As Above
Thermal conductivity: 0.99W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
-
BS EN 771-3:2011
12
Consolite (151440. Solid Dense) 22.5
Category II 440 x 100 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 100 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength: Mean
22.5N/mm2 [ bed face] Dimensional Stability: moisture movement:
< 0.55mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural
bond strength: NPD Reaction to fire: Euroclass A1 Water
Absorption:
NPD Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1990kg/m3 Configuration: As Above
Thermal conductivity: 0.99W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
-
BS EN 771-3:2011 12
Consolite (151440 Solid Dense) 22.5
Category II 440 x 140 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 140 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength: Mean
22.5N/mm2 [ bed face] Dimensional Stability: moisture movement:
< 0.55mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural
bond strength: NPD Reaction to fire: Euroclass A1 Water
Absorption:
NPD Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1990kg/m3 Configuration: As Above
Thermal conductivity: 0.99W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
-
BS EN 771-3:2011 12
Consolite (151450. Solid Dense) 30
Category II 440 x 100 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 100 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength: Mean
30N/mm2 [ bed face] Dimensional Stability: moisture movement: <
0.55mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural bond
strength: NPD Reaction to fire: Euroclass A1 Water Absorption:
NPD Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1990kg/m3 Configuration: As Above
Thermal conductivity: 0.99W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
-
BS EN 771-3:2011
12
Modulite (301400. Solid LWT) 3.6
Category II 440 x 100 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 100 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength: Mean
3.6N/mm2 [ bed face] Dimensional Stability: moisture movement: <
0.95mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural bond
strength: NPD Reaction to fire: Euroclass A1 Water Absorption:
NPD Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1350kg/m3 Configuration: As Above
Thermal conductivity: 0.36W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
-
BS EN 771-3:2011
12
Modulite (301410. Solid LWT) 7.3
Category II 440 x 100 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 100 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength: Mean
7.3N/mm2 [ bed face] Dimensional Stability: moisture movement: <
0.95mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural bond
strength: NPD Reaction to fire: Euroclass A1 Water Absorption:
NPD Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1350kg/m3 Configuration: As Above
Thermal conductivity: 0.36W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
-
BS EN 771-3:2011
12
Modulite (301610. Solid LWT) 7.3
Category II 440 x 140 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 140 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength: Mean
7.3N/mm2 [ bed face] Dimensional Stability: moisture movement: <
0.95mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural bond
strength: NPD Reaction to fire: Euroclass A1 Water Absorption:
NPD Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1350kg/m3 Configuration: As Above
Thermal conductivity: 0.36W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
-
BS EN 771-3:2011
12
Modulite (301420. Solid LWT) 10.4
Category II 440 x 100 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 100 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength: Mean
10.4N/mm2 [ bed face] Dimensional Stability: moisture movement:
< 0.95mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural
bond strength: NPD Reaction to fire: Euroclass A1 Water
Absorption:
NPD Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1350kg/m3 Configuration: As Above
Thermal conductivity: 0.36W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
-
BS EN 771-3:2011
12
Modulite (301620. Solid LWT) 10.4
Category II 440 x 140 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 140 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength: Mean
10.4N/mm2 [ bed face] Dimensional Stability: moisture movement:
< 0.95mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural
bond strength: NPD Reaction to fire: Euroclass A1 Water
Absorption:
NPD Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1350kg/m3 Configuration: As Above
Thermal conductivity: 0.36W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
-
BS EN 771-3:2011
12
Modulite (301430. Solid LWT) 17.5
Category II 440 x 100 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 100 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength: Mean
3.6N/mm2 [ bed face] Dimensional Stability: moisture movement: <
0.95mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural bond
strength: NPD Reaction to fire: Euroclass A1 Water Absorption:
NPD Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1500kg/m3 Configuration: As Above
Thermal conductivity: 0.39W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
-
CCP GROUP OF COMPANIES. Cheshire Concrete Products Ltd
Clywd Concrete Products Ltd Llay Road
Llay Wrexham LL12 0TL
BS EN 771-3:2011
12
Modulite (302400. Cellar LWT) 3.6
Category II 440 x 100 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 100 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength: Mean
3.6N/mm2 [ bed face] Dimensional Stability: moisture movement: <
0.95mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural bond
strength: NPD Reaction to fire: Euroclass A1 Water Absorption:
NPD
Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1500kg/m3 Configuration: As Above
Thermal conductivity: 0.39W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
-
BS EN 771-3:2011
12
Consolite (353910. Hollow Dense) 7.3
Category II 440 x 215 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 215 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Hollow Compressive strength:
Mean 7.3N/mm2 [ bed face] Dimensional Stability: moisture movement:
< 0.55mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural
bond strength: NPD Reaction to fire: Euroclass A1 Water
Absorption:
NPD Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1990kg/m3 Configuration: As Above
Thermal conductivity: 0.99W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
-
CCP GROUP OF COMPANIES. Cheshire Concrete Products Ltd
Clywd Concrete Products Ltd Llay Road
Llay Wrexham LL12 0TL
BS EN 771-3:2011
12
Consolite (152610. Cellar Dense) 7.3
Category II 440 x 140 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 140 (mm) x 215(mm) Dimensional Tolerances
:
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Hollow Compressive strength:
Mean 7.3N/mm2 [ bed face] Dimensional Stability: moisture movement:
< 0.55mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural
bond strength: NPD Reaction to fire: Euroclass A1 Water Absorption:
NPD
Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1990kg/m3 Configuration: As Above
Thermal conductivity: 0.99W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
-
CCP GROUP OF COMPANIES. Cheshire Concrete Products Ltd
Clywd Concrete Products Ltd Llay Road
Llay Wrexham LL12 0TL
BS EN 771-3:2011
12
Consolite (152410. Cellar Dense) 7.3
Category II 440 x 100 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 100 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Hollow Compressive strength:
Mean 7.3N/mm2 [ bed face] Dimensional Stability: moisture movement:
< 0.55mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural
bond strength: NPD Reaction to fire: Euroclass A1 Water Absorption:
NPD
Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1990kg/m3 Configuration: As Above
Thermal conductivity: 0.99W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
-
BS EN 771-3:2011
12
Modulite (101410P. Solid Paint Grade) 7.3
Category II 440 x 100 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 100 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: < 0.5mm
Parallelism: NPD Configuration: Solid Compressive strength: Mean
7.3N/mm2 [ bed face] Dimensional Stability: moisture movement: <
0.80mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural bond
strength: NPD Reaction to fire: Euroclass A1 Water Absorption:
< 350 g/m2s Water vapour diffusion coefficient: Fixed Value
5/15 Direct airborne sound insulation:
Gross density: 1450kg/m3 Configuration: As Above
Thermal conductivity: 0.38W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
-
BS EN 771-3:2011
12
Modulite (101610P. Solid Paint Grade) 7.3
Category II 440 x 140 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 140 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: < 0.5mm
Parallelism: NPD Configuration: Solid Compressive strength: Mean
7.3N/mm2 [ bed face] Dimensional Stability: moisture movement: <
0.80mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural bond
strength: NPD Reaction to fire: Euroclass A1 Water Absorption:
< 350 g/m2s Water vapour diffusion coefficient: Fixed Value
5/15 Direct airborne sound insulation:
Gross density: 1450kg/m3 Configuration: As Above
Thermal conductivity: 0.38W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
-
BS EN 771-3:2011
12
Modulite (101420P. Solid Paint Grade) 10.4
Category II 440 x 100 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 100 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: < 0.5mm
Parallelism: NPD Configuration: Solid Compressive strength: Mean
10.4N/mm2 [ bed face] Dimensional Stability: moisture movement:
< 0.80mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural
bond strength: NPD Reaction to fire: Euroclass A1 Water
Absorption:
< 350 g/m2s Water vapour diffusion coefficient: Fixed Value
5/15 Direct airborne sound insulation:
Gross density: 1450kg/m3 Configuration: As Above
Thermal conductivity: 0.38W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
-
BS EN 771-3:2011
12
Modulite (101620P Solid Paint Grade) 10.4
Category II 440 x 140 x 215 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 140 (mm) x 215 (mm) Dimensional
Tolerances :
Category: D1 Flatness: < 0.5mm
Parallelism: NPD Configuration: Solid Compressive strength: Mean
10.4N/mm2 [ bed face] Dimensional Stability: moisture movement:
< 0.80mm/m Shear bond strength: Fixed Value 0.15 N/mm2 Flexural
bond strength: NPD Reaction to fire: Euroclass A1 Water
Absorption:
< 350 g/m2s Water vapour diffusion coefficient: Fixed Value
5/15 Direct airborne sound insulation:
Gross density: 1450kg/m3 Configuration: As Above
Thermal conductivity: 0.38W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
-
BS EN 771-3:2011
12
Consolite (151616. Easi-Lay Coursing Unit) 7.3
Category II 440 x 140 x 140 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 140 (mm) x 140 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength:
Dimensional Stability:
Mean 7.3N/mm2 [ bed face]moisture movement: < 0.55mm/m
Shear bond strength: Fixed Value 0.15 N/mm2 Flexural bond
strength: NPD Reaction to fire: Euroclass A1 Water Absorption:
NPD Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1990kg/m3 Configuration: As Above
Thermal conductivity: 0.99W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
-
BS EN 771-3:2011
12
Consolite (151626. Easi-Lay Coursing Unit) 10.4
Category II 440 x 140 x 140 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 140 (mm) x 140 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength:
Dimensional Stability:
Mean 10.4N/mm2 [ bed face]moisture movement: < 0.55mm/m
Shear bond strength: Fixed Value 0.15 N/mm2 Flexural bond
strength: NPD Reaction to fire: Euroclass A1 Water Absorption:
NPD Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1990kg/m3 Configuration: As Above
Thermal conductivity: 0.99W/m.K [10,dry] Dangerous Substances:
See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
-
BS EN 771-3:2011
12
Consolite (151636. Easi-Lay Coursing Unit) 17.5
Category II 440 x 140 x 140 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 140 (mm) x 140 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength:
Dimensional Stability:
Mean 17.5N/mm2 [ bed face]moisture movement: < 0.95mm/m
Shear bond strength: Fixed Value 0.15 N/mm2 Flexural bond
strength: NPD Reaction to fire: Euroclass A1 Water Absorption:
NPD Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1990kg/3
Configuration: As Above Thermal conductivity: Dangerous
Substances:
0.99W/m.K [10,dry] See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
-
BS EN 771-3:2011
12
Consolite (151646. Easi-Lay Coursing Unit) 22.5
Category II 440 x 140 x 140 mm aggregate concrete masonry
units
Dimensions: 440 (mm) x 140 (mm) x 140 (mm) Dimensional
Tolerances :
Category: D1 Flatness: NPD
Parallelism: NPD Configuration: Solid Compressive strength:
Dimensional Stability:
Mean 22.5N/mm2 [ bed face]moisture movement: < 0.95mm/m
Shear bond strength: Fixed Value 0.15 N/mm2 Flexural bond
strength: NPD Reaction to fire: Euroclass A1 Water Absorption:
NPD Water vapour diffusion coefficient: Fixed Value 5/15 Direct
airborne sound insulation:
Gross density: 1990kg/3
Configuration: As Above Thermal conductivity: Dangerous
Substances:
0.99W/m.K [10,dry] See Note
Note: Information on Dangerous substances will only be given
when and where required in the appropriate form. See Annex ZA3 of
BS EN 771-3:2011.
CCP GROUP OF COMPANIES.Cheshire Concrete Products Ltd
Clywd Concrete Products LtdLlay Road
LlayWrexhamLL12 0TL
Blank PageBlank PageBlank Page