CDM 2015 - Design Risk Management The Genesis Centre Somerset College, Taunton TA1 5AX Help for the industry - from the industry “EVERY WEEK ONE OF US DIES” Tuesday 13th October 2015 CDM 2015: - prevention through design - risk appreciation - supporting small contractors This event is sponsored by
6
Embed
CDM 2015 - Design Risk Management Taunton flyer.pdf · CDM 2015 - Design Risk Management Tuesday 13th October 2015 The Genesis Centre Somerset College, Taunton TA1 5AX WWT may retain
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CDM 2015 - Design Risk ManagementThe Genesis Centre
Somerset College, Taunton TA1 5AX
Help for the industry - from the industry
“EVERY WEEK ONE OF US DIES”
Tuesday 13th October 2015
CDM 2015:- prevention through design- risk appreciation- supporting small contractors
This event is sponsored by
CDM 2015 - Design Risk Management
The South West Working Well Together (WWT) group and the Health and Safety Executive are inviting you to a Designer Awareness Day.
WWT is a construction industry led partnership aiming to improve the standards of health and safety. The goal is to achieve a meaningful and sustained reduction in injury and ill-health in the construction industry.
Many people with design responsibilities are not clear how to address, mitigate or eliminate risk at the design stage and are therefore unable to meet the standards expected of them. Designers have a crucial role in improving the performance of the industry.
This event is supported by the professional institutions and HSE. You will gain valuable information about the Construction (Design and Management) Regulations (CDM 2015) which spells out your duty of care - certificates will be provided.
Please ensure that at least one of your colleagues attends.
I look forward to meeting you at this seminar. Pete Creese Chair Working Well Together South West
The cost of £20 per person includes refreshments
!
!
Event Programme
BOOK NOW! WWT Southwest reserves the right to amend this programme
08:30 - 09:00 REGISTRATION TEA/COFFEE AND BACON ROLL
09:00 - 09:15 Welcome and introduction Pete Creese, Chair WWT South West
09:15 - 10:00 CDM 2015 update Helena Tinton, HSE Principal Inspector
11:30 - 12:00 Prevention through design (Health) Lucy McDonnell, HSE, Health Risk Management Unit
12:00 - 12:30 Supporting small contractors WWT SW Members
12.30 QUESTIONS AND CLOSE
Places will be allocated on a first come first served basis, so book early to ensure your place
!
!
CDM 2015 - Design Risk Management Tuesday 13th October 2015
The Genesis CentreSomerset College, Taunton TA1 5AX
WWT may retain your details in a computer record for accounting purposes, evaluation of the seminar and to advise you of other seminars and publications which may be of interest to you. If you do not wish to receive further information please tick the box.
WWT may pass basic details of companies attending this event to exhibitors. If you would prefer your contact details not to be passed on – please tick the box.
BOOKING FORM
To book a place on this event please complete the registration pages at:
https://dad-taunton.eventbrite.co.uk
Bookings will be confirmed by email via Eventbrite and a registration ticket will be available for you to print. The registration ticket will be required for admission to the seminar.
Parking - very important:
Due to our location within the grounds of Somerset College, parking at the Conference Centre is shared between staff and students and, therefore, limited. All parking on the Somerset College site requires delegates to display a £1 parking ticket, which can be purchased from the machines in the car park. We require all delegates to write their vehicle registration into the visitor’s book held in the Conference Centre.
The College operate a dual system and it is important delegates do both to avoid a penalty charge.
For enquiries please contact the South West WWT group [email protected]