CCNA 1 v3.0 Module 8 Ethernet Switching. Purpose of This PowerPoint This PowerPoint primarily consists of the Target Indicators (TIs) of this module in.

CCNA 1 v3.0 Module 8 Ethernet Switching

Purpose of This PowerPoint

This PowerPoint primarily consists of the Target Indicators (TIs) of this module in CCNA version 3.0.It was created to give instructors a PowerPoint to take and modify as their own.This PowerPoint is: NOT a study guide for the module final

assessment. NOT a study guide for the CCNA certification

exam.Please report any mistakes you find in this PowerPoint by using the Academy Connection Help link.

To Locate Instructional Resource Materials on Academy Connection:

Go to the Community FTP Center to locate materials created by the instructor communityGo to the Tools sectionGo to the Alpha Preview sectionGo to the Community link under ResourcesSee the resources available on the Class home page for classes you are offeringSearch http://www.cisco.com Contact your parent academy!

Objectives

Ethernet SwitchingCollision Domains and Broadcast Domains

Layer 2 Bridging

Bridges

Switch Operation

Full Duplex

Network Latency

Switch Modes

Switch ModesStore and Forward - A switch receives the entire frame before sending it out the destination port.Cut-Through - A switch starts to transfer the frame as soon as the destination MAC address is received.

Spanning-Tree Operation

STP States

Types of Networks

Collisions in Collision Domain

Layer 1 Devices Extend Collision Domains

Broadcasts in a Bridged Environment

Broadcast Domain Segmentation

Data Flow Through a Network

What is a Network Segment?