CLASSIFICATIONS A Few Notes about ABYC and H-31… The American Boat and Yacht Council has recommended seating standards for the marine industry. These standards help classify pedestal applications into two separate categories. These are: CLASS A Seat designed for occupancy while the boat is under way at any speed. CLASS B Seat designed for occupancy only at boat speeds not exceeding five miles per hour. Within each of these classifications all pedestals must pass a series of tests, (horizontal and vertical impacts, torque and static load test). There are also two types of Class A seats. Those are: CLASS A PASSENGER Seat mount must resist 30 foot pounds of torque. CLASS A DRIVER Seat Mount must incorporate a “mechanical interference lock” and resist 150 foot pounds of torque. AP AD A B S E A T I N G & T A B L E S
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CLASSIFICATIONS
A Few Notes about ABYC and H-31…The American Boat and Yacht Council has recommendedseating standards for the marine industry. These standards helpclassify pedestal applications into two separate categories.These are:CLASS ASeat designed for occupancy while the boat is under way at anyspeed.CLASS BSeat designed for occupancy only at boat speeds not exceedingfive miles per hour.
Within each of these classifications all pedestals must pass aseries of tests, (horizontal and vertical impacts, torque andstatic load test). There are also two types of Class A seats.Those are:CLASS A PASSENGERSeat mount must resist 30 foot pounds of torque.
CLASS A DRIVERSeat Mount must incorporate a “mechanical interference lock”and resist 150 foot pounds of torque.
AP
AD
A
B SEATING&TABLES
602
BOAT SEATS
FEATURES:• High-impact injection molded seat frame• Aluminum hinges• 28 oz. marine vinyl• High compression foam padding• 6 year warranty on frame• 3 year warranty on upholstery
Dimensions: Width: 16-1/2"Depth: 18"Height: 22"
FEATURES:• High impact plastic frame• Concave back for lumbar support• Compression foam padding• Plastic sealed to resist moisture• Heavy duty 28 oz. marine grade vinyl• UV treated to resist mildew & fading• Dacron thread• No-pinch aluminum hinges• Less swivel• 6 year warranty on frame• 3 year warranty on upholstery
Dimensions: Width: 16-1/2"Depth: 18"Height: 22"
Cuddy Marble Grey /Cuddy Charcoal /
Cuddy White870-12280
Cuddy Marble Grey /Cuddy Midnight Blue /
Cuddy Charcoal870-12281
Cuddy Marble Grey /Cuddy Red /
Cuddy Charcoal870-12282
Cuddy Midnight Blue /Cuddy Marble Grey /Cuddy Charcoal870-12283
Cuddy Red /Cuddy Charcoal /Cuddy White870-12284 For more information see: www.wiseseats.com
FEATURES:• State-of-the-Art, High-Impact Plastic Frames• Heavy-Duty 28 oz. Marine Grade Vinyl• Mildew Resistant & UV Treated• Mounting Screws Included• 6 Year Warranty on Frame• 3 Year Warranty on Upholstery
FEATURES:• Mounts on Any StandardPedestal or Swivel
• State-of-the-Art, High-ImpactPlastic Frames
• Compression Foam Padding• Heavy-Duty 26 oz. Marine Grade Vinyl• Mildew Resistant & UV Treated• 6 Year Warranty on Frame• 3 Year Warranty on Upholstery
ORDER NO. Mfr. No. Colour870-139040 WD139LS-040 Grey Seat with Red Cushion Pads870-139041 WD139LS-04 White Seat with Navy Cushion Pads870-139717 WD139LS-717 Grey Seat with Grey Cushion Pads
870-734662
870-140713 870-138713
870-139040
870-112712
For more information see:www.wiseseats.com
604For more information see www.springfieldgrp.com
BOAT SEATS
NEW-26
SPORT BUCKET CHAIRS W/FLIP-UP BOLSTER
• Marine grade vinyl• Frame is bent aluminum tube• Aluminum rail base with starboard support• Flip-Up Bolster Dimensions: 15"W x 6"D x 4"H• Overall Dimensions: 23"W x 22"D x 20"H• Bolt mounting pattern: 9.5" x 9.5" or 9.5" x 11"
CLASSIC FOLDING DECK CHAIR – CLASS B
• Durable and weather resistant• High density foam cushions covered with heavy-duty marine grade vinylthat is mildew resistant and UV treated• Aluminum with bright dip finish• Double tubes for extra sturdiness• Folds flat for compact storage• Seating Area: 20"W x 16"D x 16"H
ORDER NO. Mfr. No. Colour
104-35010 1043501 White
104-35120 1043512 Blue/White
104-35130 1043513 Tan/White
ORDER NO. Mfr. No. Colour
104-06230 1040623 Grey
104-06290 1040629 White
SOLID COLOURS
ORDER NO. Mfr. No. Colour
104-16030 1041603 Grey
104-16060 1041606 White
MULTI COLOURS
ORDER NO. Mfr. No. Colour
104-16310 1041631 Blue/Grey
104-16330 1041633 Charcoal/Grey
104-16350 1041635 Red/Grey
FISH PRO 100 CHAIRS – FOLDING
• Plush padding• Durable upholstery with hand stitched seams• High back for added support and comfort• Centre pivot comfort fold down• Rigid plastic injection molded frame• Built-in Dry Storage deep pocket with Velcro flap• Threaded T-Nuts and stainless steel screws for easy installation• Dimensions: 19”W x 16.5”D x 21”H
LOW BACK FOLDING COACH BOAT SEATS - ECONOMYwith Standard Hinge
• Plush padding• Durable upholstery• Rigid plastic injection molded frame• Retention strap with snap• Threaded T-Nuts and stainless steel screws for easy installation• Dimensions: 16.5"L x 9.5"W x 16"H
FEATURES:• State-of-the-Art, High-ImpactPlastic Frames• Vinyl Finish Roto-molded Plastic Base• Scuff and Mar Resistant• Compression Foam Padding
• Removable or Lift Up Seat Cushionfor Storage• Heavy-Duty 28 oz. Marine Grade Vinyl• Mildew Resistant & UV Treated• 6 Year Warranty on Frame• 3 Year Warranty on Upholstery
WD115 STEERING CONSOLEWITH TWO CUP HOLDERSHeight: 29.25”Width: 26”Depth: 18”
WD133 RADIUSCORNER SECTION AND BASEHeight: 29.25”Width: 25.375”Depth: 32.75”Seat Depth: 23”
607
MARINE SEATING HARDWARE & ACCESSORIES
• Used worldwide for commercial andindustrial applications• Extra-thick co-polymer constructionwall will not warp from sun, cold, orrough handling• Unique MOLDED-IN retainers to stackboxes on top of one another• Hand-laid lid gasket seals the insidefrom moisture to protect gearfrom damage
• Strong reinforced steel pin hingesystem never fails• Heavy-duty steel bar latch systemwith locking feature keeps gear safeand secure• True square inner side walls allowgear to stack tight without shifting• Beefy carrying handle stores within lid
PROFORM BOAT SEAT - MOLDED SEAT WITH UPHOLSTERED BACK & SEAT PAD
Attwood's new Venture™ folding fishing seat is designed to satisfy the widest possible range of boaters and boat builders. Mounts in anylocation on bass boats, aluminum fishing boats, fish 'n ski, pontoon and deck boats. Its advanced styling distinguishes it from all other seats on themarket, and its upholstery possibilities let you customize it for a unique look to any boat design, user preference or price point.• Support & Comfort - Ergonomic contours support 90% of all body sizes. Seat back angle and pan contour help prevent excessive pressure and evenly
distribute weight. Side-to-side contour helps stabilize the body in the seat. • Ventilated - Seat back and pan are ventilated to allow pass-through of airand water for increased comfort. • Simple Lock - Simple push button automatically locks seat back in the upright sitting position or in the foldedposition for transport.
• Tough and Durable - Underbody ribs meet ABYC H-31 seating requirements. Injection molded construction using glass-filled polypropylene for ruggeddurability and attractive appearance. • Universal Fit - Molded-in mounting holes with T-nuts. Fits standard pedestal seat mounts.
DIMENSIONS: 17" H x 19" W x 19" L
A new level of marine seating sophistication is now available to boat builders with the Proform Seating System from Attwood. More than a seat,Proform is a complete, flexible system designed to suit the needs of boat builders through a range of upholstery options, trim levels, add-onfeatures, and price points.The result of extensive research with boat owners, builders, and seat designers, Proform is a precise balance of comfort and flexibility. Itsergonomic design ensures comfort and support because it’s contoured to fit the human body. Rugged, molded construction provides durabilityand water-resistance that make Proform ideal for marine use. The versatile shell serves as a platform for a variety of custom applications.Application - Fold-down, pedestal mounted seat design exclusively for bass boats, aluminum fishing boats, fish ’n ski, pontoon and deck boats.Suitable as a fore and aft pedestal mounted seat or as a helm/cockpit seat; for a variety of installations including: mounting to a standard
These attractively patterned Mid-Back Centric SAS spring suspension seats aretrimmed out with backrest upholstered onsert, for deep tuck styling, andmolded polyurethane foam with stapled-in-place upholstery. All upholstery ismarine grade vinyl. Seats include corrosion-resistant T-nuts for attachmentto seat pedestals.Centric SAS™Centric SAS offers outstanding value and performance in a folding seat. Itincorporates all of the ergonomically tuned comfort surfaces of the Centricseat with the added comfort of the SAS shock absorbing system. In roughseas and tight maneuvers, the side bolsters and SAS suspension help to keepthe boater centered in the seat.• Compact Turning Diameter • Concealed Hinge Patented pinch-proof hinge
molded into the shell.• Lock-Down detent secures seat in the down position at speeds up to 70 mph.
DIMENSIONS: Mid-Back: 22.80" H x 18.50" W x 20.50" L
Dimensions
Seat comes with 4-T Nuts installed.Seat back rest can be locked in downposition. Swivel not included.
CENTRIC SAS™ FULLY UPHOLSTERED SEATS
VENTURE™ FOLDING FISHING SEAT
ORDER NO. Mfr. No. Description107-12404 7012-004-4 Light Grey / Signal Blue Back & Seat Pads107-12114 7012-101-4 White / White Back & Seat Pads107-12144 7012-104-4 Light Grey / Red Back & Seat Pads107-12544 7012-504-4 Light Grey / Grey Back & Seat Pads
BOAT SEATS
609For more information see: www.attwoodmarine.com
Avenir Sport contains all of the break-through features of the Avenir (SAS shock absorbing suspension system and integral flip-up bolster) butwith more compact, low profile, sporty styling. It’s ideal for smaller cockpits or any application in which size and boater comfort are important.Avenir Sport with Flip-up Bolster is ideal for applications where the boater needs the additional 7" of seat height for better visibility during slowspeed manoeuvring when the boat is off plane, making it difficult to see over the bow
AVENIR™ SEATINGAvenir is the world's first bolster seat with the award winning, patented SAS shock absorbing system. These attractively patterned SASspring suspension seats are trimmed out with backrest upholstered onsert, for deep-tuck styling, and molded polyurethane foam withstapled-in place upholstery. The arm contour has a stylish curve to support the arms in a natural, comfortable position. The side cutawayprovides ventilation at the lower back for cool comfort. All upholstery is marine grade vinyl. Seats include corrosion-resistant T-nuts forattachment to seat pedestals.
• Seat shell and molded foam provide ergonomic comfort and spinal support• Flip-up bolster. Bolster down creates rounded edge at front of seat and exceeds ABYC H-31 Type A Driver requirements.
Detent holds bolster up at 102º angle with 7" height. Provides elevated seating for improved visibility when docking or manoeuvring.• Spring grid flexes with the coil springs and supports the seat foam. Continually adjusts for circulation and comfort.• Quad spring suspension provides comfort and 3" travel for shock absorption. Prevents rider from "bottoming out".• Recessed bottom angle and rounded corners minimize the bottom "footprint". Allows seat to swivel in confined spaces.• No exposed hinges. No ugly brackets or fasteners to colour-match, pinch or abrade.
CENTRIC CONTOUR SEATINGCentric Contour is the perfect solution for value-driven boat interiors... and boater’s who want attractive styling and comfort.These high -back Centric seats are trimmed out with deep-tuck upholstered backrests, and new upholstery patterns. All upholsteryis marine grade vinyl. Seats include corrosion-resistant T-nuts for attachment to seat pedestals.
AVENIR™ FULLY UPHOLSTERED SEATS WITH FLIP-UP BOLSTERS
AVENIR™ SPORT
CENTRIC CONTOUR UPHOLSTERED SEATS
BOAT SEATS
610
HI-LO 3 PIECE PACKAGEThis is a unique 2-position, 3-part system that allows full uprightseating while fishing.Package Includes:• 11" standard post, satin finish• Hi-Lo swivel, e-coat finish• 7" x 7" standard base, satin finish• Below the deck mount, requires a 2-1/2" hole in deck• Depth of cup: 3
ORDER NO.161-54310Mfr. No. 1615431
REMOVABLE PEDESTAL SYSTEMS
STANDARD OFFSET POST• 1-3/4" diameter 13" post• Mild steel with E-Coat pin• Provides a full 5" of offset extension• Use with any Kingpin™ seat mount (Sold Separately)• Use with any standard Kingpin™ bases (Sold Separately)
ORDER NO. 161-04131Mfr. No. 1610413-OSS
7"X 7" SWIVEL SEAT MOUNT• Unintentional detachment, to comply with ABYC• 7" x 7" swivel seat mount, with spring• E-Coat finish• Rotates 360°• Use with any KingPin™ post (Sold Separately)
ORDER NO. 161-52010Mfr. No. 1615201-EC
MANUAL ADJUSTABLE PEDESTAL
Adjustable for Control and Comfort• Adjusts from 22" to 31"• Posi-Lock lever secures post at desired height• Allows swivel to rotate 360°• Satin finish• Use with any KingPin™ seat mount (Sold Separately)• Use with any standard KingPin™ base (Sold Separately)
ORDER NO. 161-34020Mfr. No. 1613402-S
STANDARD FIXEDHEIGHT POSTS• Hefty 1-3/4″ diameter post andreinforcement ring• Satin finish• Use with any KingPin™ seat mount oroffset bracket• Use with any standard KingPin™ base
ORDER NO. Mfr. No. Post Length161-04110 1610411-S 11"161-04130 1610413-S 13"161-04150 1610415-S 15"161-04250 1610425-S 25"
For more information see: www.springfieldgrp.com
KINGPIN™ SERIES
POWER-RISE ADJUSTABLE PEDESTAL
Adjustable for Control and Comfort• Adjust height to be used as seat or leaning post• Rotates 360°• Satin finish• Use with any standard KingPin™ base (Sold Separately)
B
B
BB
B
Cutaway view of Kingpin™pedestal post in base
ORDER NO. Mfr. No. Adjustable Height161-24010 1612401-S 16" to 22-3/4"161-24020 1612402-S 22-1/2" to 29-1/2"
B
CLASSIFICATIONS
See Page 619for Class descriptions
B
611
DECK RINGThis above-deck ring strengthens themounting of 9'' dia. pedestal bases.Quality cast.ORDER NO. 158-00070
POWDER-COAT BASEExceptional value! Better corrosion resistance than stainless steel atless cost!BLACKSIZE: 7" x 7"ORDER NO. 162-00180 Mfr. No. 1620018
SIZE Mfr. No. ORDER NO.(A) 7'' x 7'' BASE 1620001 162-00010(B) 7'' x 7'' BASEOFFSET SOCKET 1620003 162-00030
(C) 6'' x 8'' BASE 1620004 162-00040
SPLIT UNDER-DECK RING (8" AND 9")Easy-to-install ring provides solid below-deck mounting support for 8''to 9'' pedestal bases. Two-piece ring requires 4-1/2'' hole in the deck.Cast aluminum. Recommended for taller pedestals thatare used in rough water application.
ORDER NO. 158-00030 - 8''ORDER NO. 158-00040 - 9''
(A) (B) (C)
DECK BASES
For more information see: www.springfieldgroup.com
MOUNTING PLATES
STAINLESS STEEL DECK BASES
PEDESTALMOUNTING PLATEOne-piece mounting plate boltsflush to deck. Ideal for situationswhere under deck access isrestricted. Works on 9'' bases.Anodized aluminum.ORDER NO. 158-00060
SEAT SWIVEL• 360° ball bearing seat swivel.• E-coated for rust and corrosion resistance.• 6-7/8'' square; 4-hole pattern
JON BOAT SEAT CLAMP• Fits a wider variety of boat seats• Clamp adjusts from 8” to 20-1/2”• Includes 7” x 7” swivel
ORDER NO. Mfr. No.110-00070 1100007
ORDER NO. Mfr. No.110-04010 1104010
REMOVABLE 7" X 7"SEAT BRACKET• E-coated for rust and corrosion resistance.
ORDER NO. Mfr. No.110-00150 1100015
BOAT SEAT ACCESSORIES
612
REMOVABLE PEDESTAL SYSTEMS
Adjustable for Control & Comfort• Adjusts from 13-1/2" – 20"• Rotates 360°• Use with any Taper-Lock™ base (Sold Separately)
2-Piece set includes:• Taper-Lock™ 13" polished post• Trac-Lock swivel (locking or non-locking)• Use with any Taper-Lock™ base (not included)
Post with Seat Mount• Adjusts from 22-1/2" to 29-1/2"• 2" post• Brite Dip finish• Use with any Taper-Lock™ base (Sold Separately)
POWER-RISE ADJUSTABLE PEDESTAL
TAPER-LOCK™ SERIES
B
B
Adjustable and Secure for Control and Comfort• Adjusts from 13-1/2" to 20"• 2-3/8" post• Rotates 360°• Cam prevents free spinning while trailering• Use with any Taper-Lock™ base (Sold Separately)
2-Piece set includes:• 2-3/8" manual adjustable post (with posi-lock system)• Trac-Lock non-locking swivel (Order No. 110-00310)• Use with any Taper-Lock™ base (Sold Separately)
POWER-RISE with LOCKING HANDLE 13" FIXED HEIGHT POST
• 13" Post• Use with 2-3/8" Trac-Lock, non-locking swivel (Order No. 110-00310)(Sold Separately)
• Use with any Taper-Lock™ base (Sold Separately)
ORDER NO. Mfr. No. Post Finish
160-06150 1600615 2” Anodized
160-06100 1600610 2-3/8” Polished
AP
For more information see: www.springfieldgrp.com
160-20240
MANUAL ADJUSTABLE PEDESTAL with SEAT MOUNT
POWER-RISE STAND-UP POST & MOUNT
AD
613
PEDESTALS & ACCESSORIES
For more information see: www.springfieldgrp.com
REMOVABLE PEDESTALS
TAPER-LOCK™ HI-LO PACKAGE
• Swivel adds 4" to height of post• E-Coat finish• Use with any taper-lock hi-lo post(Sold Separately)
ORDER NO. 160-02050Mfr. No. 16004205
ORDER NO. Mfr. No. Diameter Description160-04090 1600409 2-3/8" 9" Post, Polished Finish160-04140 1600414 2" 13.5" Post, Anodized Finish160-04060 1600406 2-3/8" 13" Post, Polished Finish
• Polished finish• Use with hi-lo seat mount, (Order No. 160-02050)(Sold Separately)
• Use with any Taper-Lock™ base (Sold Separately)
ECONOMY ADJUSTABLE PEDESTAL• 7" x 7" square base and seat mount• Rugged, all steel construction with E-Coat protection• Adjusts from 12" to 18" (In 2" Increments)• For use with standard boat seats
ORDER NO. 156-11070Mfr. No. 1561107
NON-REMOVABLE PEDESTAL
CLASSIFICATIONS
See Page 619for Class descriptions
ADAP
This 2-position, 2-part system allows upright seating while fishing, or compactstorage and increased driver visibility while the boat is underway.
2-Piece set includes:• Taper-Lock™ Hi-Lo Polished 2 Post (Order No. 160-04140)• Taper-Lock™ Hi-Lo Swivel (Order No. 160-02050)• 16" from deck to top of swivel• Use with any Taper-Lock™ Base (Sold Separately)
ORDER NO. Mfr. No. Fig. Description160-00080 1600008 C 9” x 4.5” Double Flat,
Brushed Satin160-00100* 1600010 D 9” Surface Mount,
Brushed Satin*Does not require a hole in the deck
ORDER NO. Mfr. No. Fig. Description160-00030 1600003 A 9" Round, Brushed Satin160-00050 1600005 B 9" Flat, Brushed Satin
160-04140TAPER-LOCK™ HI-LO POST TAPER-LOCK™ HI-LO SWIVEL
TAPER-LOCK™ BASES
ORDER NO. 160-04270Mfr. No. 1600427
614
REMOVABLE PEDESTAL SYSTEMS
For more information see www.springfieldgrp.com
SWIVEL• E-Coat finish to resist corrosion• Use with any Spring-Lock post
ORDER NO. 164-02020Mfr. No. 1640202
9” Round Base• High-strength aluminum• Satin finish• Below the deck mount, requires a 4" hole in deck• Use with any Spring-Lock™ post (Sold Separately)
ORDER NO. 164-00020Mfr. No. 1640002
7” x 7” Square Base• Mild steel• Powder coat finish• Below the deck mount, requires a 4" hole in deck• Use with any Spring-Lock™ post (Sold Separately)
ORDER NO. 164-00070Mfr. No. 1640007
FIXED HEIGHT POSTS• Hefty 1-3/4" diameter stainless steel• Use with any Non-Locking Spring-Lock™ seat mount(Sold Separately)• Use with any Non-Locking Spring-Lock™ base (Sold Separately)
ORDER NO. Mfr. No. Post Length164-04040 1640404 13-1/2”164-04030 1640403 15-1/2”164-04250 1640425 25”
POWER RISEADJUSTABLESTAND-UP PEDESTAL
BB
STAINLESS STEELREMOVABLE PEDESTAL SYSTEM
SPRING-LOCK™ SERIES
NON-LOCKING BASES
POWER RISEADJUSTABLE PEDESTAL
Adjustable for Control & Comfort
• Air-Powered height adjustment• Adjusts from 13-1/2" to 20"• Rotates 360˚• Stainless steel post• Polished finish• Use with any Non-Locking Spring-Lock™ base
Power cylinder is protected by a stainless steel sleeve.
ORDER NO. 164-20050Mfr. No. 1642005
Post with Seat Mount
• Adjusts from 22-1/2" to 29-1/2"(unless noted)• Rotates 360˚• Stainless steel post• Polished finish• Use with any Non-Locking Spring-Lock™ base
Power cylinder is protected by a stainless steel sleeve.
ORDER NO. 164-20080Mfr. No. 1642008
CLASSIFICATIONS
See Page 619for Class descriptions
ADAP
B B
B B
615
SNAP-LOCK™ 1.77" PRODUCTSLocked in Quality.
For high performance seating, all it takes is Swivl-Eze Snap-Lock pedestal systems.• All Snap-Lock components “Snap” together for safety • Sturdy bright anodized Aluminum posts
• E-Coated seat mounts • For quality, reliability and ease-of-use, it’s a lock.
LOCK’N-PIN™ 3/4" PIN PRODUCTSThe #1 Supplier Of 3/4” Pin Products
• Economical seating system • Proven Design • Products designed to “lock” together inaccordance with ABYC H31.6.1 • Engineered to PREVENT UNINTENTIONAL DETACHMENT.
REMOVABLE PEDESTAL SYSTEMS
For more information see: www.attwoodmarine.com
BASE PLATE
102-19000Seat Mount
102-67904Base Plate
ORDER NO. Mfr. No. ABYCCode **
InstalledHeight Description
102-19000 SP-19000 AN ** 2" Seat Mount, 3º Tilt, Black E-Coat Steel
ORDER NO. Mfr. No. ABYCCode **
Req. Dia.Mount Hole Description
102-67904 SP-67904 AO ** 2.5" Base Plate, 9" Round, Aluminum
SEAT MOUNT
FIXED HEIGHT POSTS
ORDER NO.Pin Type
Mfr. No.Pin Type
ABYCCode ** Description
102-29110 SP-29110 B ** 11" Clear Anodized Post
102-29130 SP-29130 B ** 13" Clear Anodized Post
LOCK’N-PIN™ 3/4" PIN FIXED HEIGHT POSTS
LOCK’N-PIN™ 3/4" PIN SEAT MOUNT
102-10020Seat Mount
102-67729Base Plate
Fixed Height Post
Pro PostAdjustableHeight,Pin Type
ORDER NO. Mfr. No. ABYCCode **
Req.Dia. Description
102-67729 67729 B ** 2.75" 7" x 7" Base Plate, Non-Threaded Nylon Bushing
102-67729-1 67729-T B ** 2.75" 7" x 7" Base Plate, Threaded Nylon Bushing
ORDER NO. Mfr. No. ABYCCode **
InstallHeight Description
102-10020 SP-1002 B ** 2" Seat Mount, 3º Tilt, with spring, Zinc Plated Steel
ORDER NO.Pin Type
Mfr. No.Pin Type
ORDER NO.Threaded
Mfr. No.Threaded
ABYCCode ** Description
102-21140 SP-2114 102-21141 SP-2114-T B ** 11" Alum. / 1.50" Dia, Post - Brushed102-21340 SP-2134 102-21341 SP-2134-T B ** 13" Alum. / 1.50" Dia, Post - Brushed
NOTE:For Total Height,add installed height measurementof seat mounts to post height.Height is measuredfrom the boat deck.DEPTH REQUIRED BELOWDECK SURFACE:
Non-Threaded Base = 2.75"Threaded Base - 4.0"
LOCK’N-PIN™ 3/4" PIN BASE PLATES - ZINC PLATED STEEL
LOCK’N-PIN™ 3/4" PIN ADJUSTABLE HEIGHT PRO POSTS - MANUAL
FixedHeightPost,
Thrteaded
NOTE: For Total Height, add installed height measurement of seat mounts to post height.Height is measured from the boat deck.DEPTH REQUIRED BELOW DECK SURFACE: 3.5”
ABYC H31 Codes ** AO - Type A: Operator (Used at the helm / driver position)AN - Type A: Non-Operator (Not to be used at the helm / driver position)
B - Type B: (Not to be used at helm / driver position)
NOT Recommended to interchange with other manufacturers’ products
Post with seat mount• High-strength aluminum• Adjusts from 13-1/4" to 17-1/4"• Trac-Lock locking Air-Ride swivel (Order No. 110-00311)• Fits any 2-3/8" Plug-In™ base (Sold Separately)
ORDER NO. Mfr. No. Description130-06010 1300601 Power-Rise Pedestal
ORDER NO. Mfr. No. Post Length130-07090 1300709-HL 9"130-07120 1300712-HL 12"130-07150 1300715-HL 15”
ORDER NO. Mfr. No. Description130-07510 1300751-1 Plug-In Base Only
HI-LO 3-PIECE PACKAGE
This is a unique 2-position, 3-part system that allows full upright seating whilefishing or remove the pedestal and insert the seat mount into the base forcompact storage.3-Piece set includes the following:
• Plug-In™ Hi-Lo swivel seat mount• Plug-In™ Hi-Lo post (see sizes below)• Plug-In™ 9" diameter base (Order No. 130-07510)
B
AD
MANUAL ADJUSTABLE PEDESTAL W/SEAT MOUNT
Adjustable for Control and Comfort• Adjustable pedestal• Can be locked in position to prevent rotating or unlocked to rotate freely• Provides safe, stable seating• Fits any 2-3/8″ Plug-In™ base (Sold Separately)
ORDER NO. Mfr. No. Post Length130-04012 1304012-HL 12"130-04015 1304015-HL 15"
HI-LO POST
• High-strength aluminum post with anodized finish• Use Plug-In™ Hi-Lo swivel seat mount (Sold Separately)• Use with any 2-3/8" Plug-In™ Hi-Lo base (Sold Separately)
2-3/8” PEDESTAL BASES
9" Round Hi-Lo Base• 8" hole pattern• High-strength aluminum• Satin finish• Below the deck mount (Requires a 3-3/4" hole in deck)• Use with any 2-3/8" Hi-Lo post (Sold Separately)
B
PLUG-IN™ SERIES 2-3/8"
REMOVABLE PEDESTAL SYSTEMS
617
For more informationsee:www.attwoodmarine.com
ORDER NO. Mfr. No. ABYCCode **
Fixed HeightExtension Post *
102-38608 238608-1 AO ** 8” Height102-38609 238609-1 AO ** 9” Height102-38610 238610-1 AO ** 10” Height102-38611 238611-1 AO ** 11” Height102-38612 238612-1 AO ** 12” Height102-38613 238613-1 AO ** 13” Height102-38614 238614-1 AO ** 14” Height102-38615 238615-1 AO ** 15” Height102-38625 238625-1 AO ** 25” Height102-38630 238630-1 B ** 30” Height
FixedHeight
ExtensionPost
AdjustableHeight PowerPedestal
Fixed Height Bell Pedestal
238 SERIESPEDESTAL &
EXTENSION POSTS
238-SERIES SOCKET BASE
ORDER NO. Mfr. No. ABYCCode **
Req. Dia.Mounting Hole Description
102-38312 238312-1 AO ** 3” Aluminum, 9” Round
102-38322 238322-1 AO ** 3” Aluminum, 9” D-Shape
102-38333 238333-1 AO ** 3” Stainless Steel, Powder Coated,7” x 7”, Square,Centered Hole
102-38162 238162-1 AO ** Seat Mount, Plated Steel with Slider 3º, Right Handle
ORDER NO. Mfr. No. ABYCCode ** Description Degree of Tilt
102-38141 238141-1 AO ** Seat Mount, 2-3/8” Stainless Steel 3º, Left Handle
102-38142 238142-1 AO ** Seat Mount, 2-3/8” Stainless Steel 3º, Right Handle
102-38908 238908SM4 AO ** 8” Height102-38912 238912SM4 AO ** 12” Height102-38915 238915SM4 AO ** 15” Height
ORDER NO. Mfr. No. ABYCCode **
Adjustable HeightPower Pedestal *
102-38512 238512-4 AO ** 13” - 16-1/2”102-38522 238522-4 AO ** 19-1/2” - 23”102-38542 238542-1 B ** 32-1/2” - 36”
238 SERIES SEAT MOUNT WITHOUT SLIDER
238 SERIES SEAT MOUNT WITH ALUMINUM SLIDER
FIXED HEIGHT BELL PEDESTALS*(Height measured from deck to top of seat mount)
ADJUSTABLE HEIGHT POWER PEDESTAL*(Height measured from deck to top of seat mount)
ABYC H31 Codes **
AO - Type A: Operator(Used at the helm / driver position)
AN - Type A: Non-Operator(Not to be used at helm / driver position)
B - Type B:(Not to be used at helm / driver position)
238 SERIES PRODUCTSCorrosion Resistant • Smooth Movement Without Wobble• Design Simplicity and Style
• Tubes are hard-anodized aluminum • Springs are stainless steel• Bases are bead-blasted and clear-coated• E-Coated seat mounts
• For quality, reliability and ease-of-use, it’s a lock.• Not recommended to interchange with other manufacturers’ products
FIXED HEIGHT EXTENSION POST*(Height measured from deck to top of seat mount)
* Height is measured from deck to top of seat mount
NOT Recommended to interchange with other manufacturers’ products
REMOVABLE PEDESTAL SYSTEMS
618
NON-REMOVABLE PEDESTALS
Package includes:• 2-3/8" post with 9" round base, anodized finish• Adjusts from 12" to 15"• Air-Powered Height Adjustment• Includes locking Trac-Lock swivel
• 2-3/8" adjustable post with 9" base• Adjusts in 1" increments, 12-1/2" to 15-1/2"• Anodized post and satin base• Includes locking Trac-Lock swivel
ORDER NO. 125-30320Mfr. No. 1253032-l
• Use as a seat or a leaning post• Upright for enhanced lower back support• Angled to take the pressure off your legs• Rotates with your changing casting angles• Corrosion resistant power rise pedestal with up/down lever• Height adjustment from 28-1/2" to 35-1/2"
104-103520104-103510
• Adjustable Post/10" Base/Seat mount• Adjusts from 13" to 17" (Easy grip handles)• Rotates 360°• Fits standard boat seats• Corrosion-resistant powder-coat finish
ORDER NO. 144-02480Mfr. No. 1440248
ORDER NO. Mfr. No. Description104-03500 104350-SL Springlock Pro Seat, Charcoal104-03510 104351-SL Springlock Proseat, Mica104-03520 104352-PIC Plug-in Univ. Adj. Ped. 28-1/2" to 35-1/2", Charcoal104-03530 104353-TLC Taper-Lock Univ. Adj. Ped. 28-1/2" to 35-1/2", Charcoal104-03530-1 104353-TLM Taper-Lock Univ. Adj. Ped. 28-1/2" to 35-1/2", Mica104-03550 104355-KPC Kingpin Univ. Adj. Ped. 28-1/2" to 35-1/2", Charcoal104-03550-1 104355-KPM Kingpin Univ. Adj. Ped. 28-1/2" to 35-1/2", Mica
Package includes:• 2-3/8" post with 9" round base, anodized finish• Air-powered height adjustment from 14" to 20"• Includes locking Trac-Lock swivel
CONTROL POST- ADJUSTABLECUSTOM COMFORT SEATING SYSTEM & PRO FISHING STATION
EXPLORER POSI-LOC ADJUSTABLE SPRINGFIELD BELLE ADJUSTABLE
REGULAR MAINSTAY SET
LOW PROFILE MAINSTAY SET
EXPLORER PEDESTAL SET AD
AD
For more information see: www.springfieldgrp.com
MANUAL ADJUSTABLE PEDESTALS
PEDESTAL SETS
ORDER NO. ORDER NO.Non-Locking Mfr. No. Post Length Locking Mfr. No. Post Length125-05350 1250535 12" 125-05351 1250535-L 12"125-05400 1250540 18" 125-05401 1250540-L 18"
ORDER NO. 125-01001Mfr. No. 1250100-L
ORDER NO. 125-02001Mfr. No. 1250200-L
125-05350
125-01001 125-02001
AD
CLASSIFICATIONS
ADSee Page 619
for Class descriptions
AD
619
CLASSIFICATIONS
A Few Notes about ABYC and H-31…The American Boat and Yacht Council has recommended seatingstandards for the marine industry. These standards help classifypedestal applications into two separate categories.These are:CLASS ASeat designed for occupancy while the boat is under way at anyspeed.CLASS BSeat designed for occupancy only at boat speeds not exceedingfive miles per hour.
Within each of these classifications all pedestals must pass aseries of tests, (horizontal and vertical impacts, torque andstatic load test). There are also two types of Class A seats.Those are:CLASS A PASSENGERSeat mount must resist 30 foot pounds of torque.
CLASS A DRIVERSeat Mount must incorporate a “mechanical interference lock”and resist 150 foot pounds of torque.
AP
AD
SLIDES & SWIVELS
• Large 7-1/4" x 13" x 2" high, 0-degree platform• High-strength aluminum• Travels 4-1/2" forward and backward
The Trac-Lock is one of the most popular swivels available. Functional,dependable and easy to use. Used by itself or combined with any of theTrac-Lock slides, the Trac-Lock swivel is a great value.
• High-strength aluminum with powder coated finish• 2-3/8" or 2-7/8" post mount (see chart) with bushing for snug fit• Rotates 360°• Available as locking or non-Locking (see chart)• Adds 3/4" height to the pedestal
Trac-Lock slide units combine the Trac-Lock swivel and all its greatfeatures with the sturdy function and handsome details of the Trac-Lockslides to offer a wide selection of versatile, full-function slide/swivel unitsthat are easy to use.
• Trac-Lock swivel• Available as either locking or non-locking (see chart)• Centrally located locking handles• Large 7-1/4" x 13" seat mounting platform• Travels 5-1/4" forward and backward on self-lubricating pads• Adds 1-1/4" height to the pedestal
ORDER NO. Mfr. No. Post Dia. Description/Class110-05310 1100531-1 2-3/8" Non-Locking110-05311 1100531-L1 2-3/8" Locking110-05210 1100521-1 2-7/8" Non-Locking110-05211 1100521-L1 2-7/8" Locking
ORDER NO. Mfr. No. Post Dia. Description/Class110-00310 1100031-1 2-3/8" Non-Locking110-00311 1100031-L1 2-3/8" Locking410-00210 1100021-1 2-7/8" Non-Locking410-00211 1100021-L1 2-7/8" Locking
SLIDES
ORDER NO. 110-03000Mfr. No. 1100300
AD
AP
AD
AP
AD
AP
AD
AP
AD
TRAC-LOCK SERIES
SWIVELS
UNIVERSAL TRAC-LOCK SLIDE
For more information see: www.springfieldgroup.com
620
BOAT SEAT ACCESSORIES
Built to Handle the Big Water!These heavy duty 2-7/8" posts and 9" diameter machined bases are engineered for strength
and safety in harsh off-shore conditions.NOT RECOMMENDED TO INTERCHANGE WITH OTHER MANUFACTURERS’ PRODUCTS
818-64100 818641 AO ** 5/8" Seat Mount, 3º Tilt, Alum.,w/ Friction Control
NOTE:For Total Height, add installed height measurement of seat mounts to post height.Height is measured from the boat deck.
SEAT MOUNT WITH SLIDERORDER NO. Mfr. No. ABYC Code** Description828-66100 828661 AO ** Seat Mount, Aluminum, w/ Friction Control,
3º Tilt, w/ Locking Handle
325 PEDESTAL SYSTEM PINNACLE SERIESStrong, Stable & Corrosion Resistant• Features a 3-1/4" anodized tube diameter for both stability and strength• Tube and base are anodized cast aluminum for corrosion protection.• To increase support, the seat mount slide is wider and can accommodate larger seats, up to 24"• Offers 6" of forward/aft travel• The X-glide design in the slide extrusion, increases the stability with weight
Easy to reach handlesThe slide and swivel are both activated by cables that can be mounted under the seat at the front or side foreasy access. This is convenient, comfortable, and gives the user a satisfying sense of control.Just pull a contoured handle to unlock the slide or swivel mechanism, release to lock in current position.
ORDER NO. Mfr. No. ABYC Code** Description889-12010 8891201B AO ** 12" Height, Anodized Base and Tube, Black Trim Ring
NOTE:All fixed height posts, without seat mounts,come with forward positive locking hole punchedin the top of post.They can be used for AN or AO applications.
For more information see: www.attwoodmarine.com
Fixed HeightBell Pedestal
SEASPORT 2-7⁄8" FIXED HEIGHT BELL PEDESTALS• Engineered for strength and safety in harsh off-shore conditions• Satin Finish Post• Satin 9" Round Powder coated Machine Base• Type “A” Operator Models
ORDER NO. Mfr. No. Description860-60100TP 860601-TP 6" Height Post- Replaces 860601-TA860-80100TP 860801-TP 8" Height Post – Replaces 860801-TA861-00100TP 861001-TP 10" Height Post- Replaces 861001-TA861-55100TP 861551-TP 15.5" Height Post – Replaces 861551-TA861-75100TP 861751-TP 17.5" Height Post – Replaces 861751-TA
Fixed Height Bell Pedestal
ABYC H31 Codes ** AO - Type A: Operator (Used at the helm / driver position)AN - Type A: Non-Operator (Not to be used at the helm / driver position)
B - Type B: (Not to be used at helm / driver position)
SEASPORT 2-7/8” PRODUCTS
SEASPORT MEANS STRENGTH, SAFETY, AND USABILITY• Ergonomic positive-locking handles with stainless steel components• PowerLock™ Multi-Action handle controls both swiveling and height adjustment. No more wondering which handle does what• TwinGlide™ Bushing ensures smooth operation and maximum stability at any height position• EZ-Lock™ CAM-Action makes seat removal simple. When engaged, seat mount is posi-locked to the post and swivels freely
Fig. ORDER NO. DescriptionA. 217-10030 Seat Swivel BushingB. 217-10040 Post Bushing (Not shown)C. 210-00320 KingPinTM AdapterD. 217-10350 2" Hi-Lo BushingE. 217-10320 2-3/8" Hi-Lo BushingF. 210-00310 Power Pedestal Bearing Repair Kit
Fig. ORDER NO. DescriptionA. 210-00100 Seat Mount BushingB. 210-00110 Replacement Locking LatchC. 210-00120 End CapD. 210-00310 Power Pedestal Bearing Repair Kit
TAPER-LOCKTM REPLACEMENT PARTS
B
A
B
D
E
C
REPLACEMENT PARTS
SPRING-LOCKTM REPLACEMENT PARTS
KINGPINTM REPLACEMENT PARTS FOR SEAT MOUNT AND DECK BASES
622For more information see: www.garelick.com
ORDER NO. Mfr. No.459-75007 75007
ORDER NO. Mfr. No.459-75020 75020
• Accepts standard boat seats, fits tank or bench tops• Durable – All metal construction• Quick mounting & dismounting,includes 360° swivel• Vinyl covered clamps
• Rotates 360° Fits most standard seat hole patterns• Self-lubricated, non-corrosive poly swivel bearings• Plated steel to resist corrosion
• Heavy duty for offshore market• 304 Stainless steel with stainless center rivet• Rotates 360˚ – Fits most standard hole patterns• Self lubricated non-corrosive poly swivel bearings• 7" x 7" (18 x 18 cm)
ORDER NO. Mfr. No. Description459-75016 75016 "Standard" - 6" x 6" (15 x 15 cm)459-75019 75019 "Removable" - Quick release mechanism
allows seat to slide out thru plastic tracksmounted to boat
FOR USE WITH ANY GARELICK OR BELL TYPE PEDESTAL SEAT BASE
• Positively secures seats and table bases to decks or any accessory to cabin walls.• Made of 304 Stainless Steel• Saves time and labor – Provides added strength• For deck or cabin thickness from 3/8" to 3-5/8" (1-9cm), requires ½" (13mm) holes
Pedestal Mounting Kit1/4" - 20 size anchors only for mounting any model Pedestal Seat Base.Poly bag and header card.
This all-weather chair with comfortable arm rests comes with a9" heavy-duty die-cast aluminum base. The swivel rotates360-degrees and the easy-grip handle can lock from right or left.Additional features include:• Turning radius of 12"• Recessed bottom. (Strengthens chair)• Width: 19.5", Depth: 17.25", Height: 18"• Slotted back for hand grip• Anodized 15" post, 2-7/8" diameter• Adjustable 0° or 3° angled seat mount• Cushions available
This popular chair package provides the boater withthe stability needed to land the "big ones". Consider theTrac-Lock chair slide with 5" fore and aft travel, the 9"heavy-duty cast aluminum anodized base, the 360° lockingswivel and much more:• Turning radius of 12-3/4"• Width: 20.5", Depth: 17", Height: 20"• Anodized 17" post, 2-7/8" diameter• Adjustable 0° to 3° angled seat mount• Easy grip handle can lock from left to right• Plush foam padding• Non-seamed cushion that won't trap water• Textilene Mesh Underliners (Permits cushion to dry)• Marine grade vinyl
This well made, well matched unit starts with our Bluewaterchair shell for any size boater. Then we pair it with ourMainstay Power Pedestal that not only provides instant heightadjustment but also acts as a shock absorbing pedestal.Cushions made with marine grade vinyl, plush foam padding;Textilene mesh underliners permit cushion to dry. Unit alsoincludes Uni-Lock chair slide. Anodized for saltwater use.Includes Mainstay Pedestal with 14-1/2" to 19-1/2" adjustment.
Specifications:Base: 9" ; 8" hole pattern.Post (lower) 2-7/8"; (upper) 2-3/8" diameterSeat Dimensions: 18"W x 20"D x 19.5"H
• All weather chair with arm rests• Height adjusts 13-1/2" - 16-3/4"• 2-3/8" Trac-Lock Slide/Swivel (non-locking)• Marine Grade Vinyl• Adjustable polished base and post• Comes with CushionsSeat Dimensions: 19.5"W x 16"D x 17.75"H
ORDER NO. Mfr. No.110-01204 1001204-L
ORDER NO. Mfr. No.106-01000 1060100
For more information see: www.springfieldgrp.com
CLASS ASeat designed for occupancywhile the boat is underwayat any speed.
CLASS BSeat designed foroccupancy only at boatspeed not exceeding fivemiles per hour
CLASS APASSENGERSeat mount must resist30 foot pounds of torque
CLASS ADRIVERSeat mount mustincorporate a "mechanicalinterference lock" andresist 150 pounds of torque
THE ADMIRAL
NEWPORT CHAIR PACKAGE
THE COMMODORE
DELUXE BLUEWATER PACKAGE
AD
AD
A
B
AP
AD
B
AD
YACHT CHAIR PACKAGES
624
BOAT SEATS
490 ULTIMATE SPORTFISHING / HELM CHAIR & PEDESTALCLASSIC ARM CHAIR COMFORT• All weather white seat support frame with ladder back• Ideal at fly bridge, helm station, or fishing• High density, white polyethylene seat and back, thick, removablewhite cushions snap to frame, thru-bolted hardware; tough anodized aluminumextrusions, stainless steel fasteners
400 ROTO MOLDED SEATSEAT WITH CUSHIONS• Compact dimensions, beautiful styling, makes this seat perfect for center consoleor dual seat applications• Made for easy maintenance• Rotationally molded of tough UV resistant white polyethylene, marine grade white quilted vinylcovers, snap on removable cushions, tee-nut bottom inserts. Anodized support rails make seatcompatible with most pedestals, swivel and fore & aft seat slides.
ADD COMFORT AND STYLE TO YOURPONTOON OR RUNABOUT• Deep bucket styling, updates many pilot seat applications• Sized to match the scale and style of pontoons and runabouts• Roto-cast shell frame, marine grade vinyl, firm resilient foam
COMPLETE VALUE CHAIR PACKAGE• Compact design makes it ideal for most applications• Affordable upgrade or replacement• Made for easy maintenance• Rotationally molded of tough UV resistant white polyethylene• Marine grade white vinyl, snap on removable cushions• Anodized aluminum pedestal base, 360˚ locking aluminum swivel casting,9" (23 cm) diameter support base
SPECIFICATIONSSeat with cushions - Width 20" (51 cm), Depth, 23" (58 cm), Height: 19" (48 cm)ORDER NO. Mfr. No. Description459-48406 48406-02 Value Chair Package - White
625
BOAT SEATS/FOOT RESTS
For more information see: www.garelick.com
• All weather white seat support frame- Classic arm chair comfort and ladder back design backrest
• Made for easy maintenance
SPECIFICATIONSHigh density, white polyethylene seat and back, thick, removable white cushions snap toframe, thru-bolted hardware; tough anodized aluminum extrusions, stainless steel fasteners.
420 COMPACT ROTO MOLDED SEATMOLDED-IN CONTOUR STYLING FEATURES
• Perfect for any boating activity• Ideal for center console or fish boat replacement seating• Compact Ergonomic Design helps give great comfort and support with or without cushions• Dual Grab Handles provide convenient place to hold on in rough water• Front waterfall taper edges give added thigh comfort• Natural center drain eliminates water
SPECIFICATIONSRotationally molded of tough UV resistant white polyethylene,marine grade waterproof molded vinyl,snap-on removable cushions, tee-nut bottom inserts.
OPTIONAL REINFORCEMENT PLATE• For use on roto-cast seats such as this when a fore and aft seat slide is not used.Accepts 99023 and 99235 swivels.
SPECIFICATIONS13” x 7.875” x 3/16” (33 x 20 x 64 cm) thick aluminum plate,mounting hole pattern 12.5” x 5” (32 x 13 cm)
ORDER NO. Mfr. No. Description459-75004 75004 Aluminum Casting
ORDER NO. Mfr. No. Description459-48420 48420 Seat with cushions only
ORDER NO. Mfr. No. Description459-48450 48450 Seat only
ADJUSTABLE FOOT REST• Modern Styling – 15" width.• Provides added comfort for multiple users at helm.• 4 positions provide 5" of vertical height adjustment.• Angled 18 degrees down for more comfort when resting on stepping surface• Traction grooved step surface with teak inserts.• Rounded corner design helps eliminate scraping ankles.
Heavy duty wrap around aluminum extrusion with brushed anodized aluminumfinish and teak treads.
SPECIFICATIONS7.5" H x 15" W x 8.25" D (19 x 38 x 21 cm)
ORDER NO. Mfr. No.459-27516 27516
ORDER NO. Mfr. No. Description459-99070 99070 Optional re-inforced plate
SWIVEL STANCHION FOOT RESTS• Eliminates dangling feet – Adds comfort at helm• Aluminum casting fits all fixed height 2-7/8" dia. stanchion• Traction grooved stepping surface• Fits all 2-7/8" Garelick / EEz-In seat bases• 14" (35cm) Wide, 11.3" (28cm) Deep
UP DOWN
626
SWIVEL MOUNT TOP360° Positive Lock Swivel Spider Mount AnodizedAluminum Finish• 4 prong spider swivels 360° and locks positively• Fits all Garelick 2-7/8" (7cm) diameter stanchionpedestal seat bases• High tensile aluminum and all stainless hardware• Anodized aluminum finishORDER NO. 459-99023 Mfr. No. 99023
PEDESTAL OPTIONSADJUSTABLE HEIGHT STANDARD FRICTION LOCK• Seat raises or lowers, locks at desired height• 2-7/8" (7cm) diameter stanchion tube, 9" (23cm)diameter base plate• Anodized protective finish helps prevent saltwatercorrosion and weathering
2.875" PEDESTAL DIAMETERSMOOTH STANCHION SERIES SEAT HARDWARE
For more information see: www.garelick.com
MILLENIUM SERIES
SEAT SLIDE SYSTEM360° Positive Lock Swivel Spider Mount w/Black E-coat Finish• Fits all smooth 2-7/8” diameter fixed height stanchion pedestal bases• Smooth positive lock action slide – convenient spring loaded lock andergonomic release lever – Wobble Free when locked• Internal socket bearing engages for positive gear lock in 15° increments• Spring loaded positive quick auto lock engages immediately• Positive stop slide lock seat slide cam
FIXED OVERAL HEIGHT• Compatible with Garelick hardware• Provides solid base of support for a variety ofseat hardware• Accepts Garelick fore and aft seat slides and 360° swivel spidercombinations• 2-7/8" (7cm) diameter smooth stanchion tube, 9.25" (23cm) diameter6 hole base plate
SEAT SLIDE SYSTEMPositive Lock Slider & Spider Combination Left Hand Lever, Silver Powder Coat Finish• Low profile design allows 360° of rotation and 6" of smooth, wobble-free foreand aft travel• Heavy duty anodized aluminum slide plate has standard 5"x12" hole pattern toaccommodate standard seat mounting holes• Positive Lock Spider – rotates 360°, internal cup engages in 10° increments forpositive stop lock (Secondary twist control offers variable drag adj. and can betightened to lock in place)• Internal Delrin cup provides smooth, gall-free operation.• Available in either left- or right-hand operation• Meets ABYC-H31, Type A Standards & Garelick performance standards• Silver powder coated finish• Includes retaining hardware (99302)SLIDE: High tensile aluminum profile extrusion 13.75" x 8" (35cm x 20cm) plate,mounting hole pattern 5" x 12" (13cm x 30cm), Fore and Aft travel 6" (15cm).SWIVEL: High tensile aluminum 2-7/8" (7cm) diameter, plastic internal cup.All stainless hardware.ORDER NO. 459-22000 Mfr. No. 22000
SWIVEL SEAT MOUNT TOP360° Positive Lock Swivel Spider Mount Silver Powder Coat Finish• Low profile design allows 360° of rotation• Heavy duty anodized aluminum slide plate has standard 5"x12"hole pattern to accommodate standard seat mounting holes• 360° rotation is regulated by dual locking devices - lift thepositive lock lever to rotate. Drop the lever to lock in place in10° increments. Secondary twist control offers variable dragadjustment and can be tightened down to lock in place.• Internal Delrin Bearing Cup provides smooth, gall-free operation• Silver powder coated finish• Meets ABYC-H31, Type A Standards & Garelickperformance standardsORDER NO. 459-99036 Mfr. No. 99036
LOW PROFILE PEDESTAL• One piece casting for mounting seats as low as possible (4.75" Overall Height)• Compatible with Garelick Hardware• Provides solid base of support for a variety of seat hardware• 2-7/8" (7cm) diameter smooth stanchion tube, 9.25" (23cm) diameter 6 hole base plate
STANDARD SERIES – SEAT SLIDE AND SWIVELORDER NO. 459-75083 Mfr. No. 75083 See Pages 828 & 830
459-99036459-22000
PEDESTAL SYSTEMS
627
SWIVEL SEAT MOUNT TOP360° Positive Lock Swivel Spider Mount Silver Powder Coat Finish• Low profile design allows 360° of rotation• 360° rotation is regulated by dual locking devices - lift the positivelock lever to rotate. Drop the lever to lock in place in 10°increments. Secondary twist control offers variable dragadjustment and can be tightened down to lock in place.• Internal Delrin Bearing Cup provides smooth, gall-free operation• Silver powder coated finish• Meets ABYC-H31, Type A Standards & Garelick performancestandards
ORDER NO. 459-99026 Mfr. No. 99026
ADJUSTABLE HEIGHT STANDARD FRICTION LOCK• Seat raises or lowers, locks at desired height• 2-7/8" (7cm) diameter stanchion tube, 9" (23cm) diameter base plate• Anodized protective finish helps prevent saltwater corrosion and weathering.• 2-7/8" (7cm) diameter ribbed stanchion tube,9.25" (23cm) diameter 6 hole base plate
FIXED OVERALL HEIGHT• Compatible with Garelick hardware• Provides solid base of support for a variety of seat hardware• Accepts Garelick fore and aft seat slides and 360° swivelspider combinations• Accepts Seat Slides : 459-22000, 459-75080, 459-75081, 459-75083• Accepts Spiders : 459-99023,459-99036• 2-7/8" (7cm) diameter smooth stanchion tube, 9.25" (23cm)diameter 6 hole base plate
SEAT SLIDE AND SWIVEL• Provides smooth fore and aft travel and 360° seat rotation• Adds comfort and stability for any swivel boat seat• Mounts underneath seat and on top of pedestal stanchion• Compatible with any 2-7/8" (7cm) diameter tube• Convenient handles provide solid locking at any position• Meets ABYC-H31, Type A Standards & Garelick performance standards• Anodized aluminum for added protection from saltwater corrosionand weathering• Includes retaining hardware (99300) to prevent inadvertent detachment
SPECIFICATIONS:Adds 1 5/8" (4cm) to height. Hole Pattern: 5" x 12" (13x30cm).7" (18cm) Fore and Aft Travel 8.5" W x 13" L (22cm x 33cm) Requiredon Roto molded Seat Models (Includes 459-75081 & 459-99023)
ORDER NO. 459-75083 Mfr. No. 75083
SWIVEL MOUNT TOP360° Positive Lock Swivel Spider Mount Anodized Aluminum Finish• 4 prong spider swivels 360° and locks positively• Fits all Garelick 2-7/8" (7cm) diameter stanchion pedestal seat bases• High tensile aluminum and all stainless hardware• Anodized aluminum finish
ORDER NO. 459-99023 Mfr. No. 99023
459-75535
For more information see: www.garelick.com
SEAT SLIDE SYSTEMPositive Lock Slider & Spider Combination Left Hand Lever• Low profile design allows 360° of rotation and 6" of smooth, wobble-free fore and aft travel• Heavy duty anodized aluminum slide plate has standard 5"x12" holepattern to accommodate standard seat mounting holes• Positive Lock Spider – rotates 360°, internal cup engages in 10°increments for positive stop lock (Secondary twist control offersvariable drag adjustment and can be tightened to lock in place)• Internal Delrin cup provides smooth, gall-free operation.• Available in either left- or right-hand operation• Meets ABYC-H31, Type A Standards & Garelick performance standards• Includes retaining hardware (99302)• Silver powder coated finishSLIDE: 13.75" x 8" (35x20cm) slide plate, 5" x 12" (13x30cm)
OFFERS BOATERS NEW LEVELS OF COMFORT AND SAFETY INALL WEATHER AND WATER CONDITIONS
• Active Seat Suspension System absorbs and minimizes up to 75% of the shock, jolt, and vibration transmitted tothe passenger from the forces of roll, pitch, and yaw.• Active Seat Suspension Systes reduces the feelings of seasickness and nausea by absorbing excessive movementwith 1" of damped vertical travel.• This system is CAD designed, FEA proven, and precision engineered and tooled.• Components are saltwater spray tested and UV stable; to help endure harsh marine environments.• Made from rugged, high-tensile, anodized aluminum with stainless steel hardware.
Pedestal Base Mounting Options:• Standard bolt hole pattern allows for mounting on top of pedestal and beneath any individual seat• Features heavy duty forward hinge system allowing shock absorption to occur in the vertical plane only, eliminates sway and side tipping• U.S. PATENT #6,042,093• Includes provisions for mounting seats with 6" center hole pattern.• Easily mounts to almost any current seat.
Floor and Deck Mounting Options:• Standard bolt hole pattern allows for easy mounting beneath seat to the deck, a box,or the floor of a boat• Perfect for mounting beneath seat greater than 20" (51cm)• Includes provisions for mounting seats with 6" center hole pattern
SPECIFICATIONS:77000: Compact size and low profile design adds only 2" (5cm) of height.The outline is 13" x 7" (33 x 18cm) with standard 5" x 12 1/8" (13 x 31cm) slotted mounting hole pattern
SEAT HARDWARE
For more information see: www.garelick.com
Compatible with fluted tube stanchion seat bases
Adjustable CompressionFeature easily fine tuned
with NO tools
International Patents Pending
SPECIFICATIONS:75080: Standard Size for wood or plastic seats.
6” (15cm) Fore and Aft Travel 8.5” W x 8” L x 1.63” H(22cm x 20cm x 4cm)
75081: Full Length Size for roto-molded seats.7” (18cm) Fore and Aft Travel 8.5” W x 13” L x 1.63” H(22cm x 33cm x 4cm)For use where additional travel and any seat needing reinforcementunderneath. Required on all Roto molded seats.
ORDER NO. 459-77000Mfr. No. 77000
ORDER NO. Mfr. No.459-75080 75080459-75081 75081
LOW PROFILE SEAT SLIDE
ACTIVE SEAT SUSPENSION SYSTEM
459-77000H-31ABYC
Features two movablemicro-cellular urethanefoam seat shocks
• Allows helm or boat seats to adjust fore and aft• Slide mounts under seat in between seat and pedestal base• Convenient handle provides solid locking at any position• Compatible with most 360° spiders• Wobble-Free Design/Operation• Anodized aluminum with stainless steel hardware• Spider swivel casting (459-99023,459- 99036) not included
Pedestal Base Mounting77000 Active Seat Suspension System
459-75080
459-75081
629
630
SLIDES/SWIVELS/PEDESTALS
For more information see: www.garelick.com
• 3.5" Diameter Stanchion for Mid-Size (30 Ft.+) Boats• Proportionately to Scale for added Strength and Styling• Design accommodates all Garelick EEz-In Seat Slide and Swivel Spiders• Popular Heights Available – 3 Fixed Heights and 2 Adjustable Heights• Meets ABYC, H-31 Type A Standards• 3.5" (9 cm) diameter smooth stanchion tube, stanchion base casting 10.5" (27 cm) diameter6 hole, 3/8" mounting holes.
• Polished and Anodized aluminum components
SEAT SLIDE SYSTEMPositive Lock Slider & Spider Combination Left Hand Lever, Silver Powder Coat Finish• Low profile design allows 360° of rotation and 6" of smooth, wobble-free fore and aft travel• Heavy duty anodized aluminum slide plate has standard 5"x12" hole pattern to accommodate standard seatmounting holes
• Positive Lock Spider – rotates 360°, internal cup engages in 10° increments for positive stop lock (Secondary twistcontrol offers variable drag adj. and can be tightened to lock in place)
• Internal Delrin cup provides smooth, gall-free operation.• Available in either left- or right-hand operation• Meets ABYC-H31, Type A Standards & Garelick performance standards• Includes retaining hardware (99302)SLIDE: 13.75" x 8" (35x20cm) slide plate, 5" x 12" (13x30cm)
SEAT SLIDE AND SWIVEL• Provides smooth fore and aft travel and 360° seat rotation• Adds comfort and stability for any swivel boat seat• Mounts underneath seat and on top of pedestal stanchion• Compatible with any 2 7/8"(7cm) diameter tube• Convenient handles provide solid locking at any position• Meets ABYC-H31, Type A Standards & Garelick performance standards• Anodized aluminum for added protection from saltwater corrosionand weathering
• Includes retaining hardware (99300) to preventinadvertent detachment
SPECIFICATIONS:Adds 1 5/8" (4cm) to height. Hole Pattern: 5" x 12" (13x30cm).7" (18cm) Fore and Aft Travel 8.5" W x 13" L (22cm x 33cm)Required on Roto molded Seat Models(Includes 459-75081 & 459-99023)ORDER NO. 459-75083 Mfr. No. 75083
SWIVEL SEAT MOUNT TOP360° Positive Lock Swivel Spider Mount Silver Powder Coat Finish• Low profile design allows 360° of rotation• Heavy duty anodized aluminum slide plate has standard 5"x12" holepattern to accommodate standard seat mounting holes
• 360° rotation is regulated by dual locking devices - lift the positive locklever to rotate. Drop the lever to lock in place in 10° increments.Secondary twist control offers variable drag adjustment and can betightened down to lock in place.
• Internal Delrin Bearing Cup provides smooth, gall-free operation• Silver powder coated finish• Meets ABYC-H31, Type A Standards & Garelick performance standards
ORDER NO. 459-99036 Mfr. No. 99036
SWIVEL MOUNT TOP360° Positive Lock Swivel Spider Mount AnodizedAluminum Finish• 4 prong spider swivels 360° and locks positively• Fits all Garelick 2-7/8" (7cm) diameter stanchionpedestal seat bases
• High tensile aluminum and all stainless hardware• Anodized aluminum finishORDER NO. 459-99023 Mfr. No. 99023
RECTANGULAR TOP:50400: Table is 16" x 24" (41 x 61cm) and16" (41cm) high50405: Table is 16" x 32" (41 x 81cm) size21.5" (55cm) high
ROUND TOP:50410: Table is 24" (61cm) round16" (41cm) high
Order No. Mfr. No.459-50400 50400-01459-50405 50405-01459-50410 50410-01
• Anodized frame resists the elements• Beautiful sewn cushions and arm rests• HDPE seat and back substrates resist rot and warpage• Eight legged frame provides extra stability• Firm resilient 3.5” (9 cm) thick foam• Marine grade vinyl• Durable 1” (3 cm) aluminum double leg frame• Chair folds for stowage, dual locks preventfolding during use
Anodized Aluminum Frame• Lightweight, sturdy and very comfortable• One piece canvas back with 24” (61 cm) high frame• 1” thick foam padded back and thigh support for added comfort• Double leg and front cross bar frame for stability, easy to stow• Beautiful sewn olefin woven fabric, tastefully appointed withembroidered code flag design and contrasting accent trim
Specifications:Seat Height: 16" (41 cm)Colours: 62 - Navy Blue w/ Red Trim
ORDER NO. 453-50292Mfr. No. 35029-62
PREMIUM CHAIR TIPS• For 1" chair legs and tube ends • Reinforced, Non-marking, Durable.
ORDER NO. Mfr. No. Description459-76010 76010-01 Premium Chair Tips - White Poly - Package of 4459-76011 76011-01 Premium Chair Tips - Rubber - Package of 4459-76012 76011-02 Premium Double Leg Chair Tips - White Poly - Package of 2
FOLDING DECK TABLES – MELAMINE TOP SERIES
MARINER CHAIR WITH WEATHERPROOF SEWN CUSHIONS
DESIGNER SERIES PADDED DECK CHAIR
Compact size is ideal for decks, inside cabins, or picnics ashore!• Durable hard Finish Top is sealed watertight• Top: Thermofused, white melamine is permanently bonded to core on bothsides, edge finished with molded sea lip.
ORDER NO. Mfr. No. Description459-75650 75650 Includes complete system 75640 and 15" x 28"(38 x 71cm) rectangular white polymer table top
and two recessed cup holders459-75320 75320 Includes complete system 75640 and 18" x 30"(46cm x 76cm) oval, acrylic-coated ABS plastic table top
with two recessed cup holders459-75321 75321 Includes complete system 75640 and 16" x 32"(41cm x 81cm) rectangular, ABS plastic table top with
four recessed cup holders459-75640 75640 Complete system includes: deck ring, socket base, table mounting socket, 25.5" stanchion tube
• Springfield is now offering the same high quality componentsin complete table packages• Springfield table packages are made of components designed andmanufactured to offer years of satisfactory service• These table packages are available with round or oval table tops• The tops are constructed of high quality injection molded plastic anddesigned for lasting strength and durability• All packages are approximately 27" in height• Round Table - 24" diameter• Oval Table - 18" x 30"• Table Pedestals - Base: 7" diameter,5-3/4” hole pattern extends 2" below deck, 3-1/2" diameter hole in deck• Table Pedestals - Uni-Lock Series Base: 7" diameter,5-3/4" hole pattern extends 2" below deck, 3-1/2" diameter hole in deck
169-01060Thread LockOval Table Package
169-01020Thread LockRound Table Package
... Add a Table to your Boat, Deck, or Patio with ease. No difficult hole to cut in the deck.
• Patented, revolutionary table hardware system• Quick release levers allow effortless take-down of table system for storage• Simple to use, simple to install• Low-Profile deck ring creates minimal interference when table is stowed• No large centre hole in deck as is common with othertable hardware systems• Marine grade polymer components resist corrosion• 2-1/4" ribbed Anodized aluminum stanchion is tapered at both ends• 9-1/4" and 13" stanchion posts available for converting dinette into bunk use• Individual components available if additional mounting locations are desired
Model No. 75640 PedestalORDER NO. 459-75640
QUICK RELEASE TABLE PEDESTAL SYSTEM
COMPLETE TABLE PACKAGES
For more information see: wwwgarelick.com
Thread LockPost
StowawayAnodized Post
Uni-LockPost
For more information see: www.springfieldgrp.com
633
ORDER NO. Mfr. No. Description Overall Height
459-75350* 75350 Flush Mount Base w/ Fluted Anodized Tube (3 PC Set) 30" (76 cm)
459-75351 75351 Surface Mount Base w/ Fluted Anodized Tube (3 PC Set) 30" (76 cm)
459-75355* 75355 Flush Mount Taper Socket Base Only
459-75356 75356 Surface Mount Taper Socket Base Only
459-75357** 75357 Fluted Taper Stanchion Post Only 30" (76 cm)
459-75358*** 75358 Fluted Taper Stanchion Post Only 28.75" (73 cm)
459-75446 75446 Fluted Taper Stanchion Post Only 28" (71 cm)
TABLE HARDWARE
459-75355Flush Mount
459-75356Surface Mount
459-75345Flush Mount
459-75346Surface Mount
*Flush mount bases require drilling into deck and extend 2.75” below deck**For use with # 459-75355 (75355) type bases ***For use with # 459-75356 (75356) type bases
*Flush mount bases require drilling into deck and extend 2.75” below deck**For use with # 459-75345 (75345) type bases ***For use with # 459-75346 (75346) type bases
459-75350
459-75340
Table Pedestals for Smaller Boats:2.25" Post & 7" Dia. Base
• Provides salon areas and pontoon decks with removable dinette tables• Engineered for marine use• 3 piece, all-aluminum provides solid table base• Fluted profile stanchion with protective anodized finish• Quick stowage• Tapered on both ends for snug/no wobble fit
The Latest in Innovative Engineering for Optimal Performance
• Provides adjustable height in salon/cabin areas.• Self-standing, 19" Square base 3/8" thick, with 9" X 13" table top support 1/4" thick.• Ultra smooth gas powered operation adjustable 20" to 29" height.• Polished and anodized finish to resist saltwater corrosion.• 40 Lb. Gas spring• Patent PendingORDER NO. 459-75460 Mfr. No. 75460Specifications: 3/8" thick anodized aluminum plate with 3.5" stanchion tube, twist lock T-handle
GAS RISE YACHT TABLE BASE
STOWABLE MARINE TABLE HARDWARE
Table Pedestals for Larger Boats:2.875" Post & 9-1/4" Dia. Base
• Provides salon areas and pontoon decks with removable dinette tables• Engineered for marine use• 3 piece, all-aluminum provides solid table base• Fluted profile stanchion with protective anodized finish• Quick stowage• Tapered on both ends for snug/no wobble fit
For more information see:www.garelick.com
ORDER NO. Mfr. No. Description Overall Height
459-75340* 75340 * Flush Mount Base w/ Fluted Anodized Tube (3 PC Set) 30" (76 cm)
459-75341 75341 Surface Mount Base w/ Fluted Anodized Tube (3 PC Set) 30" (76 cm)
459-75345* 75345 * Flush Mount Taper Socket Base Only
459-75346 75346 Surface Mount Taper Socket Base Only
459-75347** 75347 ** Fluted Taper Stanchion Post Only (Flush Mount) 30" (76 cm)
459-75348*** 75348 *** Fluted Taper Stanchion Post Only (Surface Mount) 28.75" (73 cm)
634
TABLE KITContains # 121-10300 white octagonal table top,# 121-12200 table leg and # 121-12700 flushmount table receptacle.ORDER NO. 121-10800- Octagonal Table Kit
TABLE TOPOctagonal - Measures 20" across and comes with fourlarge molded-in recesses to accommodateinsulated cup holders.Installed table height is 27". Colour: WhiteORDER NO. 121-10300- Octagonal Table Top Only
TABLE LEGPolished Stainless Steel Leg - 2" diameter tube measure26" in length. Made of corrosion resistant304 stainless steel.ORDER NO. 121-12200- Table Leg - Stainless steel
304 Stainless Steel
Detmar’s marine and RV Removable Table System permits quickand easy setup in virtually any boat or RV camper. Octagonal(8-sided) shape molded from high impact plastic for durability andcorrosion resistance to sun, salt water and solvents. The tablerequires no maintenance. Cleanup can be done with soap and water.
For easy installation and removal the table has a molded-inunderside receptacle to fit 2" diameter table legs.
Rail Tube FastenerORDER NO. Mfr. No. Description Height O.D.422-54106 / ea. 254106-1 6" Stud Mount Hand Rail 2" 3/4" 5/16" x 18422-54112-1 / ea. 254112-1 12" Stud Mount Hand Rail 2" 3/4" 5/16" x 18
REMOVABLE MARINE / RV TABLE
RECEPTACLES
STUD MOUNT HAND RAILS
FLOOR RECEPTACLESRecessed Flush Mount - Molded of high-impactplastic, receptacle mounts flush to floor. Basemeasures 6-1/2" in diameter with a 1-5/8" recess.Table leg hole has molded-in plug eliminating needto cap hole when leg is not in place. Molded toaccept # 10 x 1-1/4" oval head SM screws.Fits 2" diameter legsORDER NO. 121-12700- Receptacle - Flush Mount, Black
TABLE RECEPTACLESurface Mount - Molded of high-impact plastic thisreceptacle mounts flush to underside of table or tofloor. Base measures 6-1/2" in diameter. Molded toaccept # 10 x 1" pan head screws.Fits 2” diameter legsORDER NO. 121-13100- Surface Mount Table Receptacle, Black