CC Marine 2013-14 Catalogue_Deck Hardware

BOATTOPS

DECKHARDWARE&

538

BOAT COVERS

IMPORTANT: To choose the correct semi-custom covers for your boat, you must knowthe beam width and center line length of your boat! Taylor Made Products Trailerite®boat covers are designed to fit several makes and models of boats with same hull styles.This means that the windshield pocket is in the average position for this range of boats.Your boat may differ.

• Walk thru windshield ordual consoles• Removeable or foldedpedestal seats• Fits wide transom boats• Sewn in motor hood• Accomodates low profiletrolling motors

• Bench seats and removable pedestalseats• Does not accommodate trolling motor• Bow and transom corner reinforcement• Without sewn in motor hoods

• Pedestal seats• Low profile trolling motors• Reinforced bow andtransom corners• Fits without windscreen• Without sewn in motor hoods

Extra care should be taken to protect your cover from coming into contact with sharp edges such as windshields, accessory brackets, or bowmounted electric trolling motors. Please pad these areas before installing your cover.CAUTION: Over the years, some boat manufacturers occasionally reuse boat model numbers or names. Boats having the same name or modelnumber can actually vary in style or size.

ALWAYS MEASURE YOUR BOAT TO BE ABSOLUTELY SURE THAT YOU ARE GETTING THE CORRECT COVER FOR YOUR BOAT!

• Highly durable 10 oz. Poly/Cotton Fabric• Four-Ply foldover reinforced seams• Reinforced corners for aluminum boats• Sewn in tie-down loops made from1" wide heavy duty nylon webbing.• Shock cord sewn in hem• Water resistant• Custom treated for mildew resistance• U.V. resistant• Breathable

®

Center-Line Length Max.ORDER NO. (From - To) Beam Width110-86115 14'5" to 15'4" 65”110-86116 15'5" to 16'4" 65”110-86117 16'5" to 17'4" 75”

Center-Line Length Max.ORDER NO. (From - To) Beam Width110-87116 15'5" to 16'4" 75”110-87117 16'5" to 17'4" 85”110-87118 17'5" to 18'4" 85”

Center-Line Length Max.ORDER NO. (From - To) Beam Width110-83216 15'5" to 16'4" 79”110-83217 16'5" to 17'4" 84”

BOAT COVERS

BASIC FISHING BOATS

FISH ’N SKI BOATS

SEMI-CUSTOM COVERS

ALUMUINIUM V-HULL FISHING BOATS

For more information see: www.taylormadeproducts.com

539

BOAT COVERS


BoatGuard® Boat Covers are America’s bestselling universal-fit trailerable boat covers.Strong enough to be trailered, and are fullycapable of surviving the rigors of the road.BoatGuard® Covers are manufactured from acrylic coated polyester grey Hot Shot™ fabric that is bothlight weight and water repellent. Storage bag & tie-downs included.

All BoatGuard® covers feature:• 4-ply folded seams and double-folded hems.• Strong 1" wide tie-down loops to secure the coverwithout scratching the boat.

• Shock cord in the hem for a close fit.• Sizes to fit most models.• 2 year limited warranty.

Taylor’s newest offering of universal covers is the BoatGuard Eclipse.This cover is designed to be eye catching and fully trailerable. Madefrom strong, durable 6.25 oz. polyester in two (2) colours. BoatGuardEclipse offers excellent mildew and water resistance and can withstandharsh environments with ease. Unique design spreads strap tensionevenly across cover surface. Each cover includes a storage bag, tie-down straps, and a support pole for a complete boat cover care system.

• Heavy duty 6.25 oz. polyester fabric in two-tone colors• Fully trailerable• Includes storage bag, tie-down straps and support pole• Sewn-in air vents provide proper air circulation under cover• 5 year limited warranty.

NOTE: Tie your cover securely while trailering and; as with any boatcover, a support pole should be used to allow water to run off.

POLYESTER Max. Length/DescriptionORDER NO. Beam Width111-70201 to 75” 12' to 14' Aluminum Fishing111-70202 to 75” 14' to 16' Aluminum Fishing111-70203 to 90” 14' to 16' V-Hull Runabout Bow Rider111-70204 to 96” 16' to 19' Fish ‘n Ski111-70211 to 96” 17' to 19' Center Console111-70205 to 102” 17' to 19' V-Hull Runabout Bow Rider111-70206 to 102” 19' to 21' V-Hull Runabout Bow Rider111-70207 to 102” 21' to 23' Cuddy Cabin

ECLIPSE Max. Length/DescriptionORDER NO. Beam Width111-70902 to 75” 14' to 16' Aluminum Fishing111-70903 to 90” 14' to 16' V-Hull Runabout Bow Rider111-70904 to 96” 16' to 19' Fish ‘n Ski111-70911 to 96” 17' to 19' Center Console111-70905 to 102” 17' to 19' V-Hull Runabout Bow Rider111-70906 to 102” 19' to 21' V-Hull Runabout Bow Rider111-70907 to 102” 21' to 23' Cuddy Cabin

Hot Shot™ FabricAcrylic Coated Polyester

Hot Shot™ FabricAcrylic Coated Polyester

BOAT COVERS

Sewn-in VentTie-downs

540

MOTOR COVERS/TARP ACCESSORIES

For more information see: www.attwoodmarine.com

For more information see: www.handimanmarine.com

INSTANT GROMMETThese reusable tarp clips instantly snap into place on plastic, cloth andcanvas to replace torn out grommets. Also for customizing tarps or attachingweights onto boat covers to keep them taut. Other handy uses includecamping, trucking, construction and on the farm.

ORDER NO. Description440-95234 Instant Grommets (4 Pack)

CUSTOM-FIT MERCURY® MOTOR COVERSShow-Off Your Engine...While You Keep it Under CoverIntroducing the new custom-fit covers for Mercury® Engines. The official Mercury Logo is displayedin brillant white against a sleek black background. These covers protect and fit far better than typical universalhoods...plus they show off your Mercury® pride on the road.Constructed of 2-Ply Laminated Polyester• The outer shell is tough, abrasion-resistant polyester• Acrylic coating keeps the cover waterproof and UV-resistant• The inside lining is a soft, non-woven polyester backing that provides a cushioned barrier around the engine cowling• 1" polyweb strap in the bottom hem cinches the cover tight. Includes quick-release buckle for fast tightening

and removal

*All Mercury Motors covers fit model year 2000 and newer engines.

TARP HOOKSSimply fill any soda bottle with sand,screw on a detachable Tarphook, and youhave a versatile and inexpensive weight.ORDER NO. 118-00050 (Each)

ORDER NO. Mfr. No. Engine Description* ENGINE SIZE

661-05635 105635 Optimax 1.5L 75HP, 90HP, 115HP, 125HP

661-05636 105636 Optimax 2.5L 135HP, 150HP, 175HP

661-05638 105638 Optimax 3.0 L2-Stroke 3.0L EFI

200HP, 225HP, 250HP200HP, 225HP, 250HP

661-05639 105639 Verado 200HP, 225HP, 250HP, 275HP, 300HP

661-05637 105637

2-Stroke 2.5L V-6 EFI2.5L V-6 Carb4-Stroke2-Stroke

150HP, 200HP150HP, 200HP75HP, 90HP, 115HP75HP, 90HP

TARP CLIPPowerful locking jaws provide ultimategripping power. Quick and Easy to use.Made from tough reinforced Nylon.ORDER NO. 382-03000 (4 Pack)ORDER NO. 382-03010 (60 Pack)

BOAT COVER REPAIR KITTotal of 24 PIECES• Canvas tool • Snap extenders (Extend A Snap)• Screw studs • Buttons • Sockets• Screw studs ORDER NO. 561-01400

For more information see: www.scotty.com

For more information see: www.dockedge.com

For more information see:www.taylormadeproducts.com

Use for:• Tarp weights.• Hanging storage for clothes pegs, nails,

nuts & bolts, garden seeds, liquids.• Bird feeders. • Targets. • Hanging baskets.• Plus many more household items.

• Tarps, Temporary Shelters• Boat and Automobile Covers• Motor Home Awnings• Emergency Tent Repairs• Swimming Pool covers• Golf Towels

RHINO GRIP™ TARP CLIP• Heavy-Duty tough fibreglass filled nylon• Crack resistant to 65˚ below zero• Create a grommet instantly on any material• Powerful tooth design on jaws for unusual gripping strength• 1/2" slot for webbing attachment• Hole that easily accepts up to 1/2" rope• Hook that allows for wide range of fastening options

The powerful CLAMPING JAWS provide a true grip forhundreds of uses

Hang it up, Tie it down

ORDER NO. Mfr. Description654-04010 4010 Rhino Grip (Pkg. 4)984-01000 984010 Rhino Grip Display (Pkg. 50)

541

BOAT COVER SUPPORT ACCESSORIES

BOAT COVER BOWSMade of heavy duty Fiberglass, these strong flexible bows will hold up even theheaviest boat covers and prevent pools of water from forming.Easy to cut if a custom fit is desired.Includes 1 set of bow sockets. ORDER NO. Mfr. No. DESCRIPTION

112-91603 91-603-FFiberglass Bow Set - 6 ft.(2 x 3'), Grey 1-9/16",includes S/S slat connector

112-91604 91-604-FFiberglass Bow Set - 8 ft.(2 x 4'), Grey 1-9/16",includes S/S slat connector

Bows mounted in bow sockets are the sureand easy way to KEEP a boat cover taut andfree from water collecting pockets.

WOODEN BOWSupport bows create arch support for boat cover.Finished hardwood.Width: 1-3/8" Length: 8' Beam: 92"ORDER NO. 102-20880

BOW SOCKETDie Cast Zinc Chrome Plated

RAIL BOW SOCKETSWill hold any type of Taylor Made Bow. Nylon Socketattaches to Bow and uses Bow tension to grip any railsystem - Bow, side or stern.Easy to install - no holes to drill.

ORDER NO. 109-09360 (Pair)

FIBERGLASS BOWSuper strong and flexible. Will not take a “set”.Cut to desired length. Shipped with rubber end coversto grab socket.

ORDER NO. 109-09240 - 72" x 1-1/4" x 3/16"

Designed to fit snugly on a 7/8" round rail without the use of fasteners.The Rail Mount Bow Sockets aid in assembling a rounded support structure for acover and can be easily removed from the boat when the cover is not in use.

A = 7/8", B = 3/8", C = 1-11/16"Mfr. No. 327400-1

ORDER NO. 423-27400 (Pair)

A = 3/8", B = 1-13/16"C = 2-9/16"Fastener: #8 FH

Mfr. No. 327415-1ORDER NO. 423-27415 (Pair)

Recessed base design allows for a water-tight seal without the use of gaskets.

A = 7/16", B = 2"C = 1-5/8"Fastener: #10 FH

Mfr. No. 327410-1ORDER NO. 423-27410 (Pair)

BOAT COVER SUPPORT SYSTEMS

DECK MOUNT BOW SOCKET (White)Injection Molded Nylon

For more information see: www.sea-dog.com

For more information see:www.attwoodmarine.com

For more information see:www.taylormadeproducts.com

For more information see:www.dockedge.com

RAIL MOUNT BOW SOCKETInjection Molded Nylon

542

COVER SUPPORT POLES

For Boats up to 19 ft.Mfr. No. 10795-4ORDER NO. 101-10795

For Boats up to 22 ft.Mfr. No. 10794-4ORDER NO. 101-10794

BOAT COVER SUPPORT POLE WITH 3-IN-1 TIPThe polished aluminum tube telescopes from 30" - 60". Pole telescopes to desired lengthusing thumb screw to lock and unlock. Furthermore 3 tips are included: Rubber,Grommet and Snap style to accommodate all applications.• Keeps Weather Covers Tight & Protects Boat Interiors• 3 Tip Styles in 1 Pole• Adjustable from 36" to 60" (73-146cm).ORDER NO. 459-94320 Mfr. No. 94320

ADJUSTABLE ALUMINUMBOAT COVERSUPPORT POLESWITH 3/8" GROMMETTIP FITTING

Adjustable:36" to 64" (91-163 cm)

Type of End:3/8" Grommet Pin

ORDER NO. 459-94303Mfr. No. 94303

ADJUSTABLE ALUMINUMBOAT COVERSUPPORT POLES• Keeps weather covers tight and helpsprotect boat interiors• Eliminates pockets that trap water andcause damage• Twist to lock and unlock; telescopes todesired length• Anodized aluminum resists corrosion

Adjustable:26" to 48" (66-122 cm)Type of End:Rubber TipORDER NO. 459-94300Mfr. No. 94300

Adjustable:36" to 64" (91-163 cm)Type of End:Rubber TipORDER NO. 459-94302Mfr. No. 94302

BOAT COVER SUPPORT STRAPS

BOAT COVER SUPPORT POLES

459-94320


For more information see: www.garelick.com

BOAT COVER SUPPORT STRAPSFor Boats up to 19'.Extends the life of any boat cover by eliminating standing water.Adjustable 1" wide polyweb straps with non-marring hooks form a tight Y ridge lineunder the cover, from bow to stern. The buckle adjustment and shock cord make it easyto achieve a custom fit.Straps are black: shock cord is 18" long by 1/4" diameter.ORDER NO. 101-10793

DELUXE BOAT COVER SUPPORT SYSTEMOne of the best cover support systems on the market. Provides an easilyadjustable, effective boat cover support to keep water from accumulating in thecenter of the boat cover.Extends the life of any boat cover by as much as 50%.The support uses a telescoping center pole (28" to 48") and polyweb strapswith bow spreader to form a double ridge line under the cover.The pole rests on a rubber foot and the web straps attach to thestern with non-marring hooks.• Aluminum pole: 1" diameter• Polyweb straps: 1" wide, black

543

COVER SUPPORTS/WINDSHIELD ACCESSORIES


Easy to install latch for hatches, windows,doors and other applications. Rugged nyloncomplete with mounting screws.(Sold in Pairs.)

Mfr. No. 551ORDER NO. 155-05510

36"- 64" ADJUSTABLE BOAT COVERSUPPORT POLEExtend the life of your boat cover by preventing waterfrom pooling on top. Our standard boat cover supportpole has a non-marring tip on each end of atelescoping aluminum tube. A durable plastic knoballows for easy adjustment of the height.Mfr. No. 11991ORDER NO. 101-11991

36"- 64" SUPER BOAT COVER SUPPORT POLEThis fully adjustable support pole is 3 support poles in one!We supply a male canvas snap, a grommettip, and a plain end cap with this SuperSupport Pole. So, if you have a female canvassnap or a grommet on your boat cover, youcan get a support that will work with yourcover. The pole is aluminum, with a durableplastic adjuster to set the correct height foryour cover.

Mfr. No. 11992ORDER NO. 101-11992

BOAT COVER SUPPORT SYSTEMExtend the life of your boat cover by preventing water from pooling.The system includes 50 feet of webbing, quick release buckles, a boatcover support pole that snaps to the webbing, and two hooksto attach to the transom.

QUICK-ON TIE-DOWN KITAttaches to almost any boat cover. Each strap set is 8' long.

UTILITY LATCH

A simple twist latch for securing walk-thruwindshields or other hatch openings.Black thermo-plastic complete withself-tapping screws.

Mfr. No. 1162ORDER NO. 111-11620 (2/Pkg.)

ADJUSTABLE SIDE VENT HANDLETURN LATCH

Designed to replace most original handles onthe side vent windows. Easy installation.Designed to fit side windows having exactly1/4" mounting hole.Sold in pairs-left & right

Mfr. No. 11616ORDER NO. 101-11610

ORDER NO. Mfr. No.105-55741 55741

ORDER NO. Mfr. No Description105-55740 55740 12 Pack Quick-On Tie-Downs

BOAT COVER SUPPORT SYSTEMS

Snap

GrommetPlain End Cap

544

T-TOP & ACCESSORIES

For more information see: www.tacomarine.com

TACO INTRODUCES ACCESSORY-READY™

Accessory-Ready™ is a patent-pending technology engineered byTACO that offers boat owners the ability to add, change and adjustAccessory-Ready™ rod holders & accessories, quickly and easily.

Accessory-Ready™ features specially designed male splines that offeruniversal adaptation. These precision male splines are designed to matewith female splines for a precision fit. Accessories can be adjusted androtated to the desired angle with a standard Allen wrench. TACO’s NeptuneAccessory-Ready technology offers unprecedented versatility and completeproduct interchangeability.

Item ORDER NO. Mfr. No. Description

ACCESSORY-READY™ ADAPTERSI 305-340213 F34-0213BXY-1 Fem.Adapter w/Male Spline Clp,1-1/4"-1-1/2"

I 305-412500 F41-2500BKA-1 Plastic Male Clamp, Fits 7/8" & 1", Blk

I 305-412520 F41-2520BKA-1 Plastic Male Clamp, Fits 3/4" & 1", Blk

I 305-362521 F36-2521BXY-1 Aluminum Male Clamp, Fits 3/4" & 1"

K 305-340600 F34-0600BXY-1 Teardrop Mount w/Male Spline, Polished Alum

Item ORDER NO. Mfr. No. Description

NEPTUNE ADJUSTABLE T-TOP & ACCESSORYA 305-341000 T34-1000BSA-1 Neptune Adjustable T-Top

A 305-030001 T30-0001BLU-1 Canvas Top, Blue, T-Top

A 305-030002 T30-0001BLK-1 Canvas Top, Black, T-Top

B 305-361050 T36-1050BSA-1 Clamp-On, Grab Rail, Fits 3/4"-1"

NEPTUNE III ACCESSORY-READY™ LEANING POSTC 305-102000 L10-2000BSA-1 Neptune III Leaning Post

D 305-102600 L11-2600BSA-1 Backrest with Grab Rail

ACCESSORY-READY™ ROD HOLDERSE 305-312750 F31-2750BXY-1 Rod Holder, 20˚ 1-3/4" ID, Aluminum

F Special Order Only F31-2750WHA-1 Rod Holder, 20˚ 1-3/4" ID, Plastic, White

G 305-412700-B F41-2700BKA-1 Clamp-On, Fits 7/8"-1", Plastic, Black

G 305-412700-W F41-2700WHA-1 Clamp-On, Fits 7/8"-1", Plastic, White

545

T-TOP & ACCESSORIES


For more information see: www.cesmithco.com

• Sunbrella® Fabric• Easy to install• Includes white lacing• 60" wide x 85" long• Packaged - Clamshell• Fits Smith™ T-top and may fit similar shapedT-tops of other manufacturers

NEPTUNE TELE-SHADE - Adjusts to fit most boats and consolesThe only Tele-scoping top on the market. Adjust height for use with low profile consoles and easy storagein garages and other height restricted areas.• Add shade without obstructing deck and gunnels• Mounts to centre console for full walk-around access, ideal for fishing• Telescopes from 7’ to 4’ for use with low profile consoles and boat storage• Adjust to fit consoles up to 46”W x 48”H• Stainless steel locking buttons and locking pull rings for easy and secure height adjustments• Unique clamp-on assembly offers do-it-yourself installation with minimal tools required• Anodized aluminum with satin finish for use in salt and fresh water environments• Weight: 30 lbs. • Ships flat • Easy accessorizing

ORDER NO. Mfr. No. Description305-342002 T34-2002VEL-1 Neptune Tele-Shade w/Black Canvas Top

ORDER NO. Mfr. No. Description336-52151 52151-1 T-Top Canopy Cover, Pacific Blue336-52151-2 52151-2 T-Top Canopy Cover, Black

NEPTUNE TELE-SHADE

T-TOP CANOPY COVERS

T-TOP ACCESSORIES

CANOPY FRAMEStrong 316L Stainless• Adjustable width canopy frame• 100% welded 1" tube construction• Fits either Low or High Bar Uprights

ORDER NO. Mfr. No. Description336-52160 52160 Canopy Frame, 60" x 85"

LOW BAR UPRIGHTSStrong 316L StainlessOur standard low bar uprights are welded 1.5" OD tube with alow angled cross bar which provides the greatest number ofstandoff mounting points for most console shapes.Includes V-brace system and all T-top mounting hardware.Sold in pairs

ORDER NO. 336-52170 Mfr. No. 52170

336-52160 336-52170

546

BIMINI TOPS


HOT SHOT™ BIMINI BOATOPS®

Manufactured with the same great features asthe current tops, these units are sold with theFrame & Fabric Tops packaged separately.Frames are Bright Dip Anodized Aluminum withMarine Nylon Hardware; Tops are manufacturedfrom Hot Shot Acrylic Coated Polyester that areavailable in colors listed below.

Frame Features:• Heavy duty thick 7/8" bright anodizedaluminum tubing

• Non-corrosive light density black nylon fittings• Double-walll tubing in main bow(on larger models)

• Both horizontal and vertical hardware included• Includes bow straps for extra support andadjustable tie down straps

• All stainless steel hardware

Fabric Top Features:• Constructed from Hot ShotTM fabric-100% acrylic coated polyester

• UV and mildew resistant• Water repellent• 6 oz. breathable fabric

ORDER NO. Mfr. No. Description

42" HEIGHTORDER NO. 104-42673 42673 Bimini Frame only 6'L x 42"H x 67"-72"WORDER NO. 104-27010 42701 OW White Top only 6'L x 42"H x 67"-72"WORDER NO. 104-27011 42701 OB Blue Top only 6'L x 42"H x 67"-72"WORDER NO. 104-27012 42701 OG Grey Top only 6'L x 42"H x 67"-72"WORDER NO. 104-27013 42701 ON Navy Top only 6'L x 42"H x 67"-72"WORDER NO. 104-27014 42701 OR Black Top only 6'L x 42"H x 67"-72"W

ORDER NO. 104-42679 42679 Bimini Frame only 6'L x 42"H x 73"-78"WORDER NO. 104-27020 42702 OW White Top only 6'L x 42"H x 73"-78"WORDER NO. 104-27021 42702 OB Blue Top only 6'L x 42"H x 73"-78"WORDER NO. 104-27022 42702 OG Grey Top only 6'L x 42"H x 73"-78"WORDER NO. 104-27023 42702 ON Navy Top only 6'L x 42"H x 73"-78"WORDER NO. 104-27024 42702 OR Black Top only 6'L x 42"H x 73"-78"W


54" HEIGHTORDER NO. 105-54673 54673 Bimini Frame only 6'L x 54"H x 67"-72"WORDER NO. 105-47010 54701 OW White Top only 6'L x 54"H x 67"-72"WORDER NO. 105-47011 54701 OB Blue Top only 6'L x 54"H x 67"-72"WORDER NO. 105-47012 54701 OG Grey Top only 6'L x 54"H x 67"-72"WORDER NO. 105-47013 54701 ON Navy Top only 6'L x 54"H x 67"-72"WORDER NO. 105-47014 54701 OR Black Top only 6'L x 54"H x 67"-72"W



PONTOON BOATS 56" HEIGHTORDER NO. 106-01325 601325 Bimini Frame only 8'L x 56"H x 96"WORDER NO. 108-40001 84000OB Blue Top only 8'L x 56"H x 96"WORDER NO. 108-40002 84000OR Black Top only 8'L x 56"H x 96"W

547

BOAT TOP HARDWARE

BOAT TOP HARDWARE


A

B

C

PAD EYEStamped 304 Stainless

PAD EYEForged AISI 304 Stainless

ORDER NO. Mfr. No. A B C Fastener420-81101 081101-1 7/16" 7/16" 1-1/8" #8 RH420-81102 081102-1 1/2" 9/16" 1-3/8" #10 RH

Note: Models 081101-1 and 081102-1 are packed in sets of 4 each.

PAD EYEDie Cast Zinc Chrome Plated

ORDER NO. Mfr. No. A B C Fastener420-81242 / set 081242-1 3/8" 1/2" 1-3/8" #8 FH

For part number 081242-1, one set includes five pad eyes.

PAD EYEForged Bronze Wire

ORDER NO. Mfr. No. Finish A B C Fastener420-81270 / pr. 081270-1 Bronze 5/16" 3/8" 1-3/8" #10 FH420-81275 / pr. 081275-1 Chrome 5/16" 3/8" 1-3/8" #10 FH420-81276 / pr. 081276-1 Chrome 3/8" 1/2" 1-9/16" #10 FH

PAD EYEInjection Molded Nylon

ORDER NO. Mfr. No. Color A B C Fastener420-81310 / set 081310-1 Black 3/8" 1/2" 1-3/8" #8 FH420-81311 / set 081311-1 White 3/8" 1/2" 1-3/8" #8 FH

Note: Models 081310-1 and 081311-1 are packed 5 each per set.

OBLONG EYE PLATEStamped 304 Stainless

ORDER NO. Mfr. No. A B C D E Fastener420-89702 089702-1 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12 FH

ORDER NO. Mfr. No. A B C Fastener420-81200 / pr.081200-1 5/16” 3/8” 1-3/8” 8 FH

548

BOAT TOP HARDWARE

ORDER NO. Mfr. No. Description Tube O.D.* Pin Size Fastener422-76100 (pr.) 276100-1 Top Cap 7/8" 1/4" N/A422-76160 (pr.) 276160-1 Jaw Slide 7/8" 1/4" N/A422-76180 (pr.) 276180-1 Top Insert 7/8" 1/4" N/A422-76200 (pr.) 276200-1 90° Deck Hinge Base: 3/4" x 2-1/4" 1/4" #10 FH422-76250 (pr.) 276250-1 Side Mount Deck Hinge Base: 1" x 2" 1/4" #10 FH* Stainless tube wall thickness .049"

BOAT TOP HARDWARE

TOP FITTINGS - Die Cast Zinc Chrome Plated

276200 276250276160 276180276100

Sold in Pairs

ORDER NO. Mfr. No. A B C Colour422-98172 298172-1 8' 1" 2-1/8" Black422-98272 298272-1 8' 1" 2-1/8" White

BIMINI STRAP - Nylon/Stainless


549

BOAT TOP HARDWARE (Stainless)

HINGE FITTINGS - Investment Cast 316 Stainless


ORDER NO. Mfr. No. Description Base Pin Size Pin/Screw Part # Fastener

422-70200 (ea.) 270200-1 90° Deck Hinge 3/4" x 2-1/4" 1/4" OP27001 #10 FH422-70205 (ea.) 270205-1 90° Deck Hinge - Heavy Duty 1" x 2-1/16" 5/16" OP27004 1/4" FH422-70210 (ea.) 270210-1 90° Deck Hinge (Removable Pin) 3/4" x 2-1/4" 1/4" OP27002 #10 FH422-70230 (ea.) 270230-1 Angle Base Deck Hinge 3/4" x 2-1/4" 1/4" OP27001 #10 FH422-70235 (ea.) 270235-1 Angle Base Deck Hinge (Removable Pin) 3/4" x 2-1/4" 1/4" OP27002 #10 FH422-70240 (ea.) 270240-1 Concave Base Deck Hinge 3/4" x 2-1/4" 1/4" OP27001 #10 FH422-70245 (ea.) 270245-1 Concave Base Deck Hinge 3/4" x 2-1/4" 1/4" OP27002 #10 FH

(Removable Pin)422-70250 (ea.) 270250-1 Side Mount Deck Hinge 7/8" x 2" 1/4" OP27006 #10 FH422-70255 (ea.) 270255-1 Side Mount Deck Hinge 1-7/8" x 2-13/16" 5/16" OP27005 1/4" FH

- Heavy Duty422-99980 (ea.) 299980-1 Lanyard with strapped release pin422-99981 (ea.) 299981-1 Lanyard with straight release pin422-99999 (set) 299999-1 Set Screw 1/4"- 28 x 3/16" Cone point hex drive (set of ten).* Stainless tube wall thickness .049"

ORDER NO. Mfr. No. Description Tube O.D.* Pin Size Pin/Screw Part #

422-70100 (ea.) 270100-1 Top Cap 7/8" 1/4" n/a422-70101 (ea.) 270101-1 Top Cap 1" 1/4" n/a422-70111 (ea.) 270111-1 Top Cap Heavy Duty 1" 5/16" n/a422-70160 (ea.) 270160-1 Top Slide with Bolt 7/8" 1/4" OP27001422-70167 (ea.) 270167-1 Hinged Top Slide with Bolt 1” 1/4” OP27001422-70161 (ea.) 270161-1 Top Slide with Bolt 1" 1/4" OP27001422-70175 (ea.) 270175-1 Top Insert - 3/4" 1/4" n/a422-70180 (ea.) 270180-1 Top Insert - 7/8" 1/4" n/a* Stainless tube wall thickness .049"

270230270200 270205 270210

270255270240 270245 270250

TOP FITTINGS - Investment Cast 316 Stainless

BOAT TOP HARDWARE

270167 270175/180270111 270160/161270100/101

550

BOAT TOP HARDWARE (Plastic)

273580

273560

273220273214

273230273200 273241273206

BOAT TOP HARDWARE

TOP FITTINGS - Injection Molded Nylon

HINGE FITTINGS - Injection Molded Nylon

TRACK FITTING

273180273160 273176273101 273101 273165

ORDER NO. Mfr. No. Description Colour Tube O.D.* Pin Size

422-73100 (pr.) 273100-1 Top Cap Black 7/8" 1/4"422-73101 (pr.) 273101-1 Top Cap White 7/8" 1/4"422-73110 (pr.) 273110-1 Top Cap Black 3/4" 1/4"422-73111 (pr.) 273111-1 Top Cap White 3/4" 1/4"422-73160 (pr.) 273160-1 Jaw Slide Black 7/8" 3/16"422-73161 (pr.) 273161-1 Jaw Slide White 7/8" 3/16"422-73165 (pr.) 273165-1 Jaw Slide Black 3/4" 3/16"422-73166 (pr.) 273166-1 Jaw Slide White 3/4" 3/16"422-73175 (pr.) 273175-1 Top Insert Black 3/4" 1/4"422-73176 (pr.) 273176-1 Top Insert White 3/4" 1/4"422-73180 (pr.) 273180-1 Top Insert Black 7/8" 1/4"422-73181 (pr.) 273181-1 Top Insert White 7/8" 1/4"* Stainless tube wall thickness .049"

ORDER NO. Mfr. No. Description Tube Dimensions Pin Size Pin/Screw Part #422-73560/ ea 273560-1 Square Tube Top Slide, Black 1" x 1" (outside) 3/16" OP27301422-73561/ ea 273561-1 Square Tube Top Slide, White 1" x 1" (outside) 3/16" OP27301422-73580/ ea 273580-1 Square Tube Top Insert, Black 7/8" x 7/8"(inside) 1/4" N/A422-73581/ ea 273581-1 Square Tube Top Insert, White 7/8" x 7/8"(inside) 1/4" N/A

SQUARE TUBE FITTING

ORDER NO. Mfr. No. Description Colour Base Width Base Length422-73213* / ea. 273213-1 .85 Track End Cap Stop Black 7/8" 1-1/4"422-73214* / ea. 273214-1 .85 Track End Cap Stop White 7/8" 1-1/4"422-73220 (pr.) 273220-1 .85 Track Slide Black 11/16" 2-3/8"422-73221 (pr.) 273221-1 .85 Track Slide White 11/16" 2-3/8"* Fastener #8 FH

ORDER NO. Mfr. No. Description Colour Base Width Base Length Fastener Pin Size422-73200 (pr.) 273200-1 Large Deck Hinge Black 13/16" 2-7/16" 3/16" #10 FH422-73201 (pr.) 273201-1 Large Deck Hinge White 13/16" 2-7/16" 3/16" #10 FH422-73205 (pr.) 273205-1 Small Deck Hinge Black 13/16" 2-3/8" 3/16" #10 FH422-73206 (pr.) 273206-1 Small Deck Hinge White 13/16" 2-3/8" 3/16" #10 FH422-73230 (pr.) 273230-1 Large Deck Hinge/Angled Black 7/8" 2-7/16" 3/16" #10 FH422-73231 (pr.) 273231-1 Large Deck Hinge/Angled White 7/8" 2-7/16" 3/16" #10 FH422-73240 (pr.) 273240-1 Concave Deck Hinge Black 13/16" 2-7/16" 3/16" #10 FH422-73241 (pr.) 273241-1 Concave Deck Hinge White 13/16" 2-7/16" 3/16" #10 FH* Stainless tube wall thickness .049"


551

BOAT TOP HARDWARE (Plastic)

ORDER NO. Mfr. No. Description Colour Base Width Base Length # Pin Size422-73250 (pr.) 273250-1 Deck Hinge Black 7/8" 2-7/16" 1/4"422-73251 (pr.) 273251-1 Deck Hinge White 7/8" 2-7/16" 1/4"422-73255 (pr.) 273255-1 Four Hole Side Mount Deck Hinge Black 1-3/4" 2" 1/4"422-73256 (pr.) 273256-1 Four Hole Side Mount Deck Hinge White 1-3/4" 2" 1/4"422-73260 (pr.) 273260-1 Side Mount Slide - .850 track Black 7/8" 2-1/4" 1/4"422-73261 (pr.) 273261-1 Side Mount Slide - .850 track White 7/8" 2-1/4" 1/4"422-73265 (pr.) 273265-1 Side Mount Slide - 1.050 track Black 1" 2-1/4" 1/4"422-73266 (pr.) 273266-1 Side Mount Slide - 1.050 track White 1" 2-1/4" 1/4"422-73270 (pr.) 273270-1 Deck Hinge Slide - .850 track Black 7/8" 2-7/16" 3/16"422-73271 (pr.) 273271-1 Deck Hinge Slide - .850 track White 7/8" 2-7/16" 3/16"422-73285 (pr.) 273285-1 Deck Hinge Slide - .850 track - Stbd & Prt Black 7/8" 2-7/16" 3/16"422-73286 (pr.) 273286-1 Deck Hinge Slide - .850 track - Stbd & Prt White 7/8" 2-7/16" 3/16"422-73295 (pr.) 273295-1 .85 Track Slide Lock Black 11/16" 13/16" n/a422-73296 (pr.) 273296-1 .85 Track Slide Lock White 11/16" 13/16" n/a

NOTE: 422-73255 & 422-73256 Use #10 FH Fasteners.

ORDER NO. Mfr. No. Description Colour Tube O.D.* Length422-73298 (pr.) 273298-1 Head Screw - 1/4"-20 x 7/8" Black Fits part # 273250 thru 273266 1-3/8"422-73299 (pr.) 273299-1 Head Screw - 1/4"-20 x 7/8" White Fits part # 273250 thru 273266 1-3/8"422-73310 (pr.) 273310-1 Tube Connector - 3/4" Black 3/4" 2-1/4"422-73300 (pr.) 273300-1 Tube Connector - 7/8" Black 7/8" 2-1/4"* Stainless tube wall thickness .049"

273265/266273251 273255 273261

273295273280

HINGE FITTINGS - Injection Molded Nylon

HEAD SCREWS & CONNECTORS - Injection Molded Nylon

CANVAS TOP FITTINGS - Injection Molded Nylon

BOAT TOP HARDWARE

ORDER NO. Mfr. No. Description Colour Tube O.D.* Hole Space Fastener422-73350 273350-1 90˚ Inside Eye End Black 3/4" n/a n/a422-73351 273351-1 90˚ Inside Eye End White 3/4" n/a n/a422-73369 273369-1 90˚ Inside Eye Bracket Black n/a 15/16" #8 FH422-73370 273370-1 90˚ Inside Eye Bracket White n/a 15/16" #8 FH* Stainless tube wall thickness .049"

273285

273369

273351

ORDER NO. Mfr. No. Description A B C D E F422-73565/ ea. 273565-1 Bracket Mount Jaw Slide,Black 2-1/16" 3/4" 5/16" 3/4" 3/8" 1/4"

273298

273300


273565

273271

552

CANVAS FASTENERS


ORDER NO. Mfr. No. Fig. No. Description422-99101 Ea set 299101-1 1 & 2 Canvas Socket - 7/32" (3/set) & Backplate (3/set)422-99102 Ea set 299102-1 3 & 4 Canvas Stud - 2 Prong Clinch (4/set) & Washer (4/set)422-99103 Ea set 299103-1 5 & 6 Canvas Stud - Eyelet Type (4/set) & Washer (4/set)

ORDER NO. Mfr. No. Fig. No. Description422-99108 Ea set 299108-1 7 & 8 Canvas Snap Cap 1/4" (6/set) & Socket (6/set)422-99109 Ea set 299109-1 9 & 8 Canvas Snap Cap 5/16" (6/set) & Socket (6/set)422-99110 Ea set 299110-1 10 & 15 Canvas Snap Stud - Standard (6/set) & Snap Post - 1/4" (6/set)

ORDER NO. Mfr. No. Fig. No. Description422-99111 Ea set 299111-1 20 Canvas Snap Stud (#8 Sheet Metal Screw) 3/8" (6/set)422-99112 Ea set 299112-1 21 Canvas Snap Stud (#8 Sheet Metal Screw) 5/8" (6/set)422-99115 Ea set 299115-1 22 Canvas Snap Stud (#10-32 Machine Screw) 3/8" (5/set)

ORDER NO. Mfr. No. Fig. No. Description422-99104 Ea set 299104-1 16 Canvas Stud - (#8 Wood Screw) 1/2" (5/set)422-99105 Ea set 299105-1 17 Canvas Stud - (#8 Sheet Metal Screw) 3/8" (5/set)422-99106 Ea set 299106-1 18 Canvas Stud - (#8 Sheet Metal Screw) 5/8" (5/set)422-99107 Ea set 299107-1 19 Canvas Stud - (#8-32 Machine Screw) 3/8" (5/set)

CANVAS FASTENERSNickel Plated Brass

1

2

3

4

5

16 17 18 19

ORDER NO. Mfr. No. Fig. No. Description422-99116 Ea pair 299116-1 23 Snap Turn Buckle - 2 Screw Base" (2/set)422-99117 Ea set 299117-1 11 & 12 Snap Turn Buckle - 2 Prong Clinch (2/set) & Backplate (2/set)422-99118 Ea set 299118-1 13 & 14 Snap Turn Buckle Eyelet (2/set) & Washer (2/set)422-99119 Ea pair 299119-1 24 Snap Turn Buckle (#7 Brass Wood Screw) 5/8" (2/set)

23 11

12 14

13 24

6

7

8

9

8

10

15

20 21 22

ORDER NO. Mfr. No. Fig. No. Description422-99120 Ea 299120-1 25 Canvas Snap Hand Punch & Base

25

ORDER NO. Mfr. No. Fig. No. Description422-99124 Ea set 299124-1 26 S.S. Windshield Clip - 3/4" Base (4/set)422-99125 Ea set 299125-1 27 S.S. Windshield Clip - 7/8" Base (4/set)

26 27

553

RIGGING AND CANVAS – TOOLS

BOAT TOP HARDWARE & ACCESSORIESPULL THE DOT FASTENER

FASTENER TOOLORDER NO. 101-13600

“TOP-SNAPPER” TOOL• Makes snapping boat covers and tops easy!• Dual blades to fasten inside and outside canvas snaps• Both blades are ideal for unsnapping snaps withoutripping your canvas• Easy-to-grip rubberized handle• Works on corroded snaps and shrunken canvas• Lifetime WarrantyORDER NO. 968-00008Mfr. No. 00880

VICE GRIP DOME SETTERSSpecial Welded on Dies for Setting #106-06700/#014-05480and #101-18100/#101-18201 FastenersORDER NO. 102-24000

Attach No. 101-18100/101-18201 with regular dome setting tools.

Make Fastening Boat Canvas ‘a Snap’

WINDSHIELD CLIPSORDER NO. 101-10388 (3/4")ORDER NO.101-10391 (7/8")

MARINE SNAP CANVAS KITWITH PLIERS TOOL• Includes 72 piece snap assortment.• Will do up to 2 layers of material.• Fast and simple to use.Mfr. No. 970162ORDER NO. 970-16200

TOP-SNAPPERCOUNTER DISPLAY• Display 12 Top-Snappers ina 8" x 5" point of purchase displayMfr. No. 008.80ORDER NO. 968-00088

CANVAS PUNCHPunches 6 hole sizes 5/64 – 3/16"ORDER NO. 990-69000Mfr. No. 990690

CANVAS PLIERSORDER NO. 990-69100Mfr. No. 990691

EXTEND-A-SNAP™ CANVAS FASTENER

Extend-a-Snaps help to avoid shrinkageof canvas covers while gaining3/4" per side, on the coverORDER NO. 654-56261Mfr. No. 560261 Package of 4

No more tug-of-war with shrunkencanvas covers!

For more information see: www.handimanmarine.com

For more information see: www.ironwoodpacific.com

DOME BUTTON - 3/16" use with No. 014-5480ORDER NO. 106-06700

DOME SOCKET - use with No. 106-06700ORDER NO. 014-05480

POST EYELET - 3/16" post use with No. 105-05500ORDER NO. 105-05501

DOME STUD - Attach with screw or rivet or with No. 105-05501ORDER NO. 105-05500

DOME STUD - No. 8 x 3/8" Stainless Steel Screw Robertson DriveORDER NO. 106-06880

No.101-18100 - BUTTON No.101-18201 - SOCKET No.101-18303 - STUD

INTERNAL EYE ENDS615" diameter, for 3/4" tubing. 2 per pkg.Chrome plated Zamak.ORDER NO. 101-12020

This fastener has a unique locking feature which willwithstand extreme pressure on three sides withoutunlocking, yet releases instantly on the fourth sidewhen outer edge of cloth is lifted up.Neater appearance than Lift-A-Dot or Turnbutton.

Note: Will not interchange with the regular Dome Fasteners

CANVAS FASTENERS & TOOL KIT• Nickel Plated Brass• Stainless Steel Screws• Comes in lockable partitioned plastic box• Peggable

Kit Contains:(40) Snap Button 11/64" Barrel, (40) Socket(22) ¼" Barrel Eyelet, (22) Eyelet Stud(8) Stud #8 x 3/8" (10) Stud #8 x 5/8"(1) Steel Punch (1) Molded Lexan Base

ORDER NO. 970-14500 Mfr. No. 970145

554For more information see: www.sea-dog.com


RAIL TUBING & FITTINGS/CONTINUOUS HINGES

POLISHED ALUMINUM MOLDING (Half Oval)

TACO’S CONTINUOUS HINGES

DRAWN ALUMINUM TUBING

STAINLESS STEEL TUBING (ROUND)

1/4-28 x 3/16 Headless socket,cup point, stainless steel.

ORDER NO. 422-99999 - 10 Pk.ORDER NO. 654-00555 - 100 / Box

Fits any rub rail with cross section approximately1-1/4" wide x 3/4" thick. Predrilled with two countersunkmounting holes to accommodate #10 screws.

Overall length: 4".Width: 1-5/8".

Die-cast ZAMAK with chrome plated finish.Use as end trim for rubber or vinyl rub rail.ORDER NO. 109-94621

RUB RAIL END CAP

Used for a multitude of applications including grab rails,bow rails and canvas top frames. Polished finish.ORDER NO. O.D. Wall Thickness Length080-10780 7/8" .049 10'080-20780 7/8" .049 20'080-10100 1" .049 10'080-20100 1" .049 20'

SET SCREW

• Long-lasting stainless steel• Movable fasteners ideal for hinging lids and hatches• Drilled on 2” centers with no stagger

ORDER NO. Mfr. No. Description Finish140-11272-A H14-0112A72-1 1-1/2" x 72" Annealed140-11272-P H14-0112P72-1 1-1/2" x 72" Polished140-11472-A H14-0114A72-1 1-1/4" x 72" Annealed140-20072-A H14-0200A72-1 2" x 72" Annealed

6063-T5 alloy and temper is designed for easy tight radius bending as wellas providing strength and protection.Anodized finish to protect against the harsh marine environment.Drilled and countersunk on 6" centres.

ORDER NO. Mfr. No. Length Height Width500-19501 A50-0195TAL12D 12' 3/4" 3/16

Close tolerance to provide consistent use with rail and topfittings. Also offers superior strength to standard extrudedtube. Fits most canvas top applications.Silver Bright Dip and Anodized finish for chrome likeappearance. Withstands corrosive environments. Extrusionflow lines may appear through the anodized finish.

ORDER NO. O.D. Wall Thickness Length003-10780 7/8" .058 10'003-12780 7/8" .058 12'003-20780 7/8" .058 20'

For more information see:www.attwoodmarine.com

555

RAIL FITTINGS

ORDER NO. Mfr. No. Description Tube O.D.*

422-90600 (ea.) 290600-1 60° Universal Tee 7/8"

422-90601 (ea.) 290601-1 60° Universal Tee 1"

422-90900 (ea.) 290900-1 90° Tee 7/8"

422-90901 (ea.) 290901-1 90° Tee 1"

422-91600 (ea.) 291600 -1 60° Tee - Left Hand 7/8"

422-91601 (ea.) 291601-1 60° Tee - Left Hand 1"

422-92600 (ea.) 292600 -1 60° Tee - Right Hand 7/8"

422-92601 (ea.) 292601 -1 60° Tee - Right Hand 1"

422-93100 (ea.) 293100-1 3-Way Corner Fitting 7/8"422-93101 (ea.) 293101-1 3-Way Corner Fitting 1"

422-93141 (ea.) 293141-1 4-Way Tee 1"

ORDER NO. Mfr. No. Description

422-99999 (set) 299999-1 Set Screw 1/4" - 28 x 3/16" Cone point hex drive (set of ten).


* Stainless tube wall thickness .049"



RAIL TEESInvestment Cast 316 Stainless

ELBOWSInvestment Cast 316 Stainless

STANCHION CAPInvestment Cast 316 StainlessTube O.D.* 7/8"Eye Diameter: 5/16"Mfr. No. 270510-1ORDER NO. 422-70510

LIFELINE BASEInvestment Cast 316 StainlessBase: 2-7/16" x 1-1/2"Pin Diameter: 3/8"Fastener: #10 FHMfr. No.: 270550-1ORDER NO. 422-70550

290600290601291600291601292600292601

290900290901

293100293101

293141

295090295091

295110295111

Flagpole mounting hole in Bow Forms are designed to fit 1/2" diameter flagpole such as part number #103-28110

ORDER NO. Mfr. No. Description Tube O.D.* Degree

422-95090 (ea.) 295090-1 Elbow 7/8" 90°

422-95091 (ea.) 295091-1 Elbow 1" 90°

422-95110 (ea.) 295110-1 Bow Form 7/8" 110˚

422-95111 (ea.) 295111-1 Bow Form 1" 110˚

556

RAIL FITTINGS


ORDER NO. Mfr. No. Description Tube O.D.* Base Fastener422-80300 (ea.) 280300-1 30° Round Base 7/8" 2-5/8" # 10FH422-80301 (ea.) 280301-1 30° Round Base 1" 2-3/4" 1/4" FH422-80450 (ea.) 280450-1 45° Round Base 7/8" 2-5/8" #10 FH422-80451 (ea.) 280451-1 45° Round Base 1" 2-3/4" 1/4" FH422-80600 (ea.) 280600-1 60° Round Base 7/8" 2-5/8" #10 FH422-80601 (ea.) 280601-1 60° Round Base 1" 2-3/4" 1/4" FH422-80900 (ea.) 280900-1 90° Round Base 7/8" 2-5/8" #10 FH422-80901 (ea.) 280901-1 90° Round Base 1" 2-3/4" 1/4" FH* Stainless tube wall thickness .049"

ORDER NO. Mfr. No. Description Tube O.D.* Base Fastener422-81300 (ea.) 281300-1 30° Rectangular Base 7/8" 1-3/4" x 2-5/8" #10 FH422-81301 (ea.) 281301-1 30° Rectangular Base 1" 1-7/8" x 3-3/16" 1/4" FH422-81450 (ea.) 281450-1 45° Rectangular Base 7/8" 1-11/16" x 3" #10 FH422-81451 (ea.) 281451-1 45° Rectangular Base 1" 1-7/8" x 3-1/4" 1/4" FH422-81600 (ea.) 281600-1 60° Rectangular Base 7/8" 1-3/4" x 3-1/16" #10 FH422-81601 (ea.) 281601-1 60° Rectangular Base 1" 1-7/8" x 3-1/4" 1/4" FH422-81900 (ea.) 281900-1 90° Rectangular Base 7/8" 1-11/16" x 3" #10 FH422-81901 (ea.) 281901-1 90° Rectangular Base 1" 1-7/8" x 3-3/16" 1/4" FH422-99999 (set) 299999-1 Set Screw 1/4" - 28 x 3/16" Cone point hex drive (set of ten)* Stainless tube wall thickness .049"

Rail HeightORDER NO. Mfr. No. Description (See example above) Tube O.D.* Fastener422-85060 (ea.) 285060-1 60° Center 1-13/16" 7/8" #10 FH422-85061 (ea.) 285061-1 60° Center 2-3/16" 1" 1/4" FH422-85160 (ea.) 285160-1 60° End 1-13/16" 7/8" #10 FH422-85161 (ea.) 285161-1 60° End 2-3/16" 1" 1/4" FH422-88290 (ea.) 288290-1 Bullet End n/a 7/8" n/a* Stainless tube wall thickness .049"

BASE RAIL FITTINGS - RECTANGULARInvestment Cast 316 Stainless

BASE RAIL FITTINGS - ROUNDInvestment Cast 316 Stainless

HAND RAIL FITTINGSInvestment Cast 316 Stainless

280300280301

280450280451

280600280601

280900280901

281300281301

281450281451

281600281601

281900281901

285060285061

285160285161

288290

557

RAIL FITTINGS


ORDER NO. Mfr. No. Description Tube O.D.* Base Fastener422-86030 (ea.) 286030-1 30° Round Base 7/8" 2-5/8" #10 FH422-86060 (ea.) 286060-1 60° Round Base 7/8" 2-5/8" #10 FH422-86090 (ea.) 286090-1 90° Round Base 7/8" 2-5/8" #10 FH422-86130 (ea.) 286130-1 30° Rectangular Base 7/8" 1-5/8" x 2-3/4" #10 FH422-86145 (ea.) 286145-1 45˚ Rectangular Base 7/8" 1-5/8" x 2-3/4" #10 FH422-86160 (ea.) 286160-1 60° Rectangular Base 7/8" 1-5/8" x 2-3/4" #10 FH422-86190 (ea.) 286190-1 90° Rectangular Base 7/8" 1-5/8" x 2-3/4" #10 FH422-99999 (set) 299999-1 Set Screw 1/4" - 28 x 3/16" Cone point hex drive (set of ten).422-99980 (ea.) 299980-1 Lanyard with Stepped Release Pin422-99981 (ea.) 299981-1 Lanyard with Straight Release PinSet screws can be purchased separately or the fittings can be pop riveted using stainless steel or aluminum rivets.Skin pack fittings include set screws. * Stainless tube wall thickness .049"

ORDER NO. Mfr. No. Description Tube O.D.*422-96090 (ea.) 296090-1 90° Tee 7/8"422-96095 (ea.) 296095-1 90° Elbow 7/8"422-96160 (ea.) 296160-1 60° Tee - Left Hand 7/8"422-96260 (ea.) 296260-1 60° Tee - Right Hand 7/8"422-96510 (ea.) 296510-1 110° Bow Form 7/8"422-99999 (set) 299999-1 Set Screw 1/4" - 28 x 3/16" Cone point hex drive (set of ten).Set screws can be purchased separately or the fittings can be pop riveted using stainless steel or aluminumrivets. Skin pack fittings include set screws. * Stainless tube wall thickness .049"

BASE RAIL FITTINGSDie Cast Zinc Chrome Plated

RAIL TEESDie Cast Zinc Chrome Plated

HAND RAIL FITTINGSDie Cast Zinc Chrome Plated

296095296090 296160 296260 296510

286030 286060 286090 286130 286145 286160 286190

286560 286565 286566 286955 286290

Rail HeightORDER NO. Mfr. No. Description (See example above) Tube O.D.* Fastener422-86560 (ea.) 286560-1 60° Center 2-1/8" 7/8" #10 FH422-86565 (ea.) 286565-1 60° End - Left Hand 2-1/8" 7/8" #10 FH422-86566 (ea.) 286566-1 60° End - Right Hand 2-1/8" 7/8" #10 FH422-86955 (ea.) 286955-1 5-1/2° Blend Base 7/8" #10 FH422-86290 (ea.) 286290-1 Bullet End 7/8"* Stainless tube wall thickness .049"

558

WINDSHIELD HARDWARE


ORDER NO. Mfr. No. A B C D423-24300 (set) 324300-1 2-1/16" 3/4" 3/4" 3/16"Fits 5/8" Tube

WINDSHIELD BRACE FOOTInjection Molded Nylon

ORDER NO. Mfr. No. A B C Fastener423-22210 322210-1 1-5/16" 7/8" 5/8" #6 FH

ORDER NO. Mfr. No. Description A B C D423-24110 (pr.) 324110-1 Single Wing Latch - .105 1-9/16" 5/8" 3/16" 1/8"423-24140 (pr.) 324140-1 Single Wing Latch - .300 1-9/16" 13/16" 3/16" 5/16"423-24180 (pr.) 324180-1 Thumb Latch - .035 1-1/2" 11/16" 3/16" 1/16"423-24210 (pr.) 324210-1 Double Latch - .022 1-11/16" 5/8" 3/16" 1/16"

ANTI-RATTLE WINDOW FASTENERSand Cast Brass Chrome Plated

WINDSHIELD LATCHInjection Molded Nylon

324110/324140 324180 324210

SQUARE TUBE WINDSHIELD BRACEInjection Molded Nylon

ORDER NO. Mfr. No. Colour A B C D E F423-24320 (pr.) 324320-1 Black 2-9/16" 11/16" 3/4" 1/2" 1-13/16" 3/16"423-24321 (pr.) 324321-1 White 2-9/16" 11/16" 3/4" 1/2" 1-13/16" 3/16"

559

WINDSHIELD HARDWARE


ORDER NO. Mfr. No. Color A B C D E423-24340 (pr.) 324340-1 Black 1-3/8" 9/16" 1/2" 1-1/16" 5/16"

ORDER NO. Mfr. No. Color A B C D E F423-24360 (pr.) 324360-1 Black 1-1/8" 3/4" 1-5/16" 15/16" 3/8" 5/16"

ORDER NO. Mfr. No. Color A B C D423-24390 (pr.) 324390-1 Black 3/4" 3/16" 3/8" 1/8"

ORDER NO. Mfr. No. A B C D E423-24380 (ea.) 324380-1 5" 1-9/16" 2-3/16" 1-15/16" 5/16"

ORDER NO. Mfr. No. Standoff A B C D E423-24350 (pr.) 324350-1 1/4" 15/16" 7/16" 9/16" 9/16" 7/16"423-24355 (pr.) 324355-1 1/2" 15/16" 7/16" 9/16" 7/8" 11/16"

FEMALE WINDSHIELD RETAINERInjection Molded Nylon

WINDSHIELD BALL & SOCKETInjection Molded Nylon

MALE WINDSHIELDRETAINER SPACERInjection Molded Nylon

SIDE VENT ADJUSTER KITInjection Molded Nylon

WINDSHIELD/DOOR BUMPER PADInjection Molded PVC

Improved push nut retainer cap with washer. Includes a 302 stainless steel pin.

560

WINDSHIELD ACCESSORIES

For more information see: www.starbrite.com

ORDER NO. Rail Size Description408-85781 7/8" 1 Blister Card (6 Window Saver)408-85101 1" 1 Blister Card (6 Window Saver)

WINDSHIELD SUPPORT BARSUsed as original equipment on many finewalk-thru windshields. Windshield supportbars are made from either anodizedaluminum tubing with nylon fittings or powder coat aluminum tubingwith chrome plated zamak feet*. The fittings allow for pivot in almostevery direction for easy installation. Sold in single units.

SUN BLOCK CLIP - WINDOW PROTECTORProtect your clear plastic windows from scorching & costly replacement with“SUN-BLOCKER”, a self insulated protective clip which eliminates contact betweenyour metal tubular top frame & the clear plastic windows. Unprotected windowsdevelop a chronic condition which should no longer exist for boaters. It is a safetyhazard when you can’t see through these windows! “SUN-BLOCKER” reducessingeing, scorching & heat cracking. Two or three “SUN-BLOCKER” clips can giveyou maximum protection against element destruction of your clear plastic windows.• Designed cooling air-vents • All rounded-corners eliminate abrasion

ORDER NO. Mfr. No. Size Finish101-16320 1632 11" Alum.101-16340 1634 12" Alum.101-16360 1636 13" Alum.101-16370 1637* 13" P/Coat101-16380 1638 14" Alum.101-16390 1639* 14" P/Coat101-16410 1641* 15" P/Coat101-16420 1642* 16" P/Coat

CLEAR PLASTIC WINDOW SAVER• Simple and easy to install• Stops sun heated railsfrom burning plastic windows• Keeps plastic windows clean and clear• Stops scratching and abrasion ofplastic windows due to rubbing on rails

ORDER NO. Description Colour144-00078 Sun Blocker Clip, 7/8" Marine Grey144-00100 Sun Blocker Clip, 1" Marine Grey

A = 8" B = 12" C = 11"SWEEP: 110°Mfr. No. 410811-1ORDER NO. 424-10811

WIPER MOTOR ONLY - 110° SWEEPORDER NO. Mfr. No. Finish424-10710 410710-1 Matte Black

ORIGINAL STYLE (Hook)ORDER NO. Mfr. No. DESCRIPTION C424-11111 411111-1 Blade 11"424-11114 411114-1 Blade 14"

NEW STYLE (Hinge)ORDER NO. Mfr. No. DESCRIPTION C424-11151 411151-1 Blade 11"424-11154 411154-1 Blade 14"

SELF PARKING WINDSHIELD WIPERStamped 304 Stainless Cover

WINDSHIELD WIPER COMPONENTS STAMPED - 304 Stainless/Lexan Blades

WINDSHIELD WIPER & ACCESSORIES

WINDSHIELD MALE SNAP ADAPTERDesigned and used for many OEM windshield / canvasapplications. Molded nylon insert fits into trim grooves..200" wide by .500" deep and accepts standard male screw-insnaps. 6 sets of inserts and snaps included. Use to secure cockpitcovers, bimini tops, etc.ORDER NO. 111-04070Mfr. No. 407

All hook style wiper blades and arms arereplacements for Sea-Dog wipers sold priorto 1993. In addition, the hook style wiperblades and arms will fit most older wiperssold by AFI, Wilcox, NA Taylor, GEM, L.S.Brown and others.

All current Sea-Dog wipers now come withthe new slip-on hinge style wiper blades andarms. Verify style required prior to ordering.


For more information see: www.nhsmarine.com


HIDDENHOLD-DOWN FASTENERSComplete with nutsand rubber grommetsORDER NO. 111-16070Mfr. No. 1607

561

GAS SPRINGS & ACCESSORIES

For more information see: www.teleflexmarine.com

Industry standard 16mmcomposite end fittings- no rust, no rattles, noproblems.

Electrostatic black paintfinish on steel tube forcorrosion protection andappearance.

Tri-Lobe seal lasts longer.Smaller cross sectionmeans less seal wear-longer life.

Bronze bushing-long wearing, retainslubrication forsmooth operation.

Nitrided rod. Corrosionresistant. Micro fine finishholds oil to lubricate seals.

ORDER NO. Mfr. Extended Compressed RatedNo. Length (Ibs.)

(inches)051-62600 GS62600 7.5 5.5 20051-62610 GS62610 7.5 5.5 40051-62630 GS62630 10 7 20051-62640 GS62640 10 7 40051-62670 GS62670 12 8.5 30051-62680 GS62680 15 9.5 20051-62700 GS62700 15 9.5 40051-62710 GS62710 15 9.5 60051-62720 GS62720 17 11 20051-62740 GS62740 17 11 40051-62750 GS62750 17 11 60051-62760 GS62760 17 11 90051-62770 GS62770 20 12 20051-62780 GS62780 20 12 30051-62790 GS62790 20 12 40051-62800 GS62800 20 12 60051-62820 GS62820 20 12 90051-62830 GS62830 20 12 120

GS62840 051-62840Black zinc plated steel flatbracket with 10mm ball stud.2.25" wide.

GS62860 051-62860Black zinc plated steel 90˚ anglebracket with 10mm ball stud.2" wide, .65" base.

GS62890 051-62890Rod end with internal threads for eitherend of Nautalift gas filled lift supports.Unique construction makes installationeasy and safe.

GS62910 051-62910Zinc plated steel10mm ball stud withthreaded shaft.

• Marine Grade Gas Filled Supports,designed for demanding saltwaterapplications

• 316L Stainless Steel Rod & CylinderEngineered polymer rod ends

• Bronze bushings

• Multi-lobe internal seal

ORDER NO. Mfr. Extended Compressed RatedNo. Length (Ibs.)

(inches)051-62601 GSS62600 7.5 5.5 20051-62611 GSS62610 7.5 5.5 40051-62631 GSS62630 10 7 20051-62641 GSS62640 10 7 40051-62671 GSS62670 12 8.5 30051-62681 GSS62680 15 9.5 20051-62701 GSS62700 15 9.5 40051-62711 GSS62710 15 9.5 60051-62721 GSS62720 17 11 20051-62741 GSS62740 17 11 40051-62751 GSS62750 17 11 60051-62761 GSS62760 17 11 90051-62771 GSS62770 20 12 20051-62781 GSS62780 20 12 30051-62791 GSS62790 20 12 40051-62801 GSS62800 20 12 60051-62821 GSS62820 20 12 90051-62831 GSS62830 20 12 120

NAUTALIFT™ GAS LIFTSUPPORTS AND ACCESSORIES

NAUTALIFT™STAINLESS STEEL

GAS LIFT SUPPORTS

Marine Grade Gas Filled Supports, Annealed steel rods nitride coated for corrosion resistance,Engineered polymer rod ends, Bronze bushings, Multi-lobe internal sealExact fit OEM replacement – used by leading boat builders for over 20 years

562

HATCHES & ACCESSORIES

LOW PROFILE ACCESS &VENTILATION HATCH

TAYLOR MADE HATCH REPLACEMENT PARTS - MODEL YEARS 1990 TO PRESENT

Mfr. No. Fig. ORDER NO. Description Quantity1731 A 111-17310 1994-Present handle w/post, “O” rings, lock, screw One1724 B 111-17240 Hatch riser arm - for 10" x 10" hatch One1723 C 111-17230 Hatch riser arm - for 12" x 12" hatch One1728 C 111-17280 Hatch riser arm - for 13" x 18" hatch One1729 D 111-17290 Hatch riser arm - for 17" x 17" hatch One1730 D 111-17300 Hatch riser arm - for 18" x 18" hatch One1722 D 111-17220 Hatch riser arm - for 20" x 20" hatch One1727 E 111-17270 1994-Present exterior latching handles Pair1721 F 111-17210 Hatch riser arm locking knob One1720 G 111-17200 1990-1993 Handle w/post, O-rings, screw One1725 H 111-17250 D-sponge gasket 7'1726 I 111-17260 Installation foam - 1/4" x 1/2" 8'

Items A & E are for model years 1994-Present only. Item G is for model years 1990-1993 only.All hatch riser arms and handles are universal and can be used on the left or right side.

A B C

D E F

G H I

Taylor Made® gray tempered safety glass for scratch resistance and clarity. New security locking handleswith lock-in vent position. Positive lock riser arms for easy open/easy close. Pre-drilled mounting holes.

Designed as a replacement for all Taylor Made® and similar style hatches. Trim ring included.

ORDER NO. Mfr. No. Description Frame Size MaximumHole Cut-Out

111-50103 50103 Ultra III Hatch 12" x 12" 14-3/4" x 14-3/4" 12" x 12"111-50111 50111 Ultra III Hatch 20" x 20" 22-1/2" x 22-1/2" 19-3/4" x 19-3/4"

TAYLOR MADE® HATCHES


563For more information see: www.sea-dog.com

HATCH ADJUSTER/SUPPORTS

ORDER NO. Mfr. No. A B C D423-21295 321295-1 11-15/16" 17-7/8" 1-3/8" 1-3/16"423-21296 321296-1 14-15/16" 24" 1-3/8" 1-3/16"

ORDER NO. Mfr. No. A B C Fastener423-21650 321650-1 8-5/8" 1-1/16" 3/4" #10 RH & 3/16" Pop Rivet

HATCH ADJUSTERFormed and Stamped 304Stainless/Nylon

HATCH SPRINGFormed and Stamped 304 Stainless

HATCH ADJUSTERFormed and Stamped 304 Stainless/Nylon

The Sea-Dog Hatch Spring has an internal wire that prevents the spring from being over-extended during normal use.Not recommended for applications where hatch will scoop wind while boat is underway and over-extend spring.

ORDER NO. Mfr. No. A B C D423-21291(Ea) 321291-1 11-1/8" 17-7/8" 1-3/8" 1-3/16"423-21292(Ea) 321292-1 14-3/16" 24-3/16" 1-3/8" 1-3/16"

564

CLEATS

A = 8"B = 2-3/4"C = 2-11/16"D = 1-3/4"E = 2"

Cleats, 8" LongPre-drilled for 1/4" screws.ORDER NO. 106-62460 (each)Mfr. No. 6246-3

ORDER NO. Mfr. No. A B C D Fastener420-44604 /ea. 044604-1 4” 1-1/4” 1-1/2” 1-1/16” #10 FH420-44606 /ea. 044606-1 6” 1-9/16” 2-1/4” 1-3/16” #10 FH

OPEN BASE CLEATChrome Plated Zinc Alloy

ORDER NO. Overall Length Dimensions Base Max. Rope Size Screw Size621-11884 (pair) 4" 2-1/8" x 1-1/2" 5/16" # 10621-11886 (each) 6" 3" x 1-3/4" 7/16" # 10621-11888 (each) 8" 4" x 2-1/8" 5/8" 1/4

HOLLOW BASE CLEATDie-cast ZAMAK withPerma-Plate® chrome finish.Bases are pre-drilled for quick,easy installation.

ORDER NO. Mfr. No. A B C D Fastener425-44104/ea 044104-1 4-1/2" 1-1/16" 1-3/4" 1-3/16" # 8 FH425-44106/ea 044106-1 6" 1-3/8" 2-3/16" 1-9/16" # 10 FH

ORDER NO. Mfr. No. Description A B C D E Screw Size106-66009 66009L3 6” Cleat 6” 2-1/4" 1-7/8” 1-1/4” 1-9/64” 1/4"106-66010 66010L3 8” Cleat 8” 2-27/32” 2-3/16” 1-1/2” 1-11/32” 1/4"106-66011 66011-3 10” Cleat 10” 3-3/4” 2-11/16” 1-7/8” 1-11/16” 5/16”

HERRESHOFF CLEATClassic Herreshoff style cleat provides traditional styling,easy line tie-off, and corrosion-resistance.Made of enhanced 316 stainless steel alloy.Four holes for attachment. See table for fastener size.

4-HOLE CLEATDie Cast Zinc Chrome Plated

OPEN BASE CLEATDie Cast Zinc Chrome Plated Zinc



For more information see: www.perko.com



CLOSED BASE CLEATChrome Plated Zinc Alloywith Black Polymer Base.

OPEN BASE CLEATChrome Plated Zinc Alloywith Black Polymer Base.

ORDER NO. Overall Length Max. Rope Size Screw Size621-13061 (pair) 4-1/2" 3/8" # 10621-13062 (each) 6" 1/2" 1/4

ORDER NO. Overall Length Max. Rope Size Screw Size621-13051 (pair) 4-1/2" 3/8" # 10621-13052 (each) 6" 1/2" 1/4

565

CLEATS

For moreinformation see:

www.attwoodmarine.com


A B C D E F G HTotal Total Above Above Line Between Thread InstallLength Width Deck Deck Opening Stanchions Length Depth

Lowered Raised4-1/2” 1-15/16” 1/2” 1-5/8” 1-1/4” 1-3/4” 1-3/4” 3-1/8"6” 1-1/2” 1/2” 1-5/8” 1-1/4” 2-1/4” 1-3/4” 3-1/8"

FLUSH CLEATSThis cleat recesses flush to the deck for a clean, contemporary lookat an affordable price. Two mounting styles include an exclusivestud-mounted cleat (Patented). Water-resistant cleat recesses intocast body and is captured with lubricated seals. An optionaldrainage receptacle mounts below the cleat to drain off water.Durable, enhanced cast 316 stainless steel construction and simplepatented design assures long-life and dependable operation.Easy InstallationHole pattern is similar to competitive models1/8" stamped backing plate, for decks thicker than1/2", is standard on all models

Optional stainless steel backing plate # 1484-1 is required if deck thickness is less than 1/2"

*Countersunk models: Fasteners not included. Stud mount: Fasteners are included.

Mfr. No. Description A B C D E FCOUNTERSUNK*66510 4-1/2" Cleat 5-1/4" 4-1/2" 3-1/8" 1-3/4" 1-5/8" 1-7/16"66514 6" Cleat 7" 6" 3-1/3" 2" 1-7/8" 1-21/32"STUD MOUNT66512 4-1/2" Cleat 5-1/4" 4-1/2" 3-1/8" 2" – –66516 6" Cleat 7" 6" 3-1/3" 2-3/8" – –

Stud mountCounter-sunk

Stud mount

Counter-sunk mount

Drainage Receptacle

ORDER NO. Mfr. No. Description Mounting Style106-66510 66510-7 4-1/2" Flush Cleat Counter-sunk106-66512 66512-7 4-1/2" Flush Cleat Stud mount106-66514 66514-7 6" Flush Cleat Counter-sunk106-66516 66516-7 6" Flush Cleat Stud mount101-14840 1484-1 Drainage Receptacle ( for 4-1/2" cleat )101-14860 1486-1 Drainage Receptacle ( for 6" cleat )

All-new design offers what you’ve been asking for - a retractable cleatwith a thin profile that installs easily on narrow gunwales.

• The cleat stays up when pulled up. Friction springs hold it in place& reduce rattling

• When lowered, cleat is only 1/2" above deck.• Beautiful, strong and durable - each stanchion is a 7/8" rod of solidenhanced # 316 stainless steel alloy.

ORDER NO. Mfr. No.106-66515 66515-7106-66517 66517-7

FOLDING STUDMOUNT CLEATInvestment Cast 316 StainlessFolding Stud Mount Cleat folds downfor flush appearance,

S-STYLE PULL-UP CLEATInvestment Cast 316 StainlessIncludes backing plate. Recesses flush tothe deck for a contemorary look.

ORDER NO. Mfr. No. A B C D E420-41304 041304-1 6-1/4” 4-1/2” 1-1/2” 1/2” 2-9/16”420-41594 041594-1 Drain Fitting for 420-41304

ORDER NO. Mfr. No. A B C D E420-41404 041404-1 6-7/16” 4-1/2” 2-1/8” 1/2” 1-11/16”

Specifications: (Install. Hole Saw Size: 7/8") (Max Hull Thickness: 1")

NEAT CLEATS

566

CLEATS


B

D

CA

The above cleats are interchangeable with Wilcox® 409 Cleats

All Sea-Dog Open Base Nylon Cleats are designed with a molded-in recess in the base.This traps the sealant in place providing a more watertight seal.

Black

OPEN BASE CLEAT - FLAT HEAD

DOCK CLEAT - FLAT HEAD

OPEN BASE CLEAT

CLEATS

OPEN BASE CLEAT

Investment Cast 316 Stainless

Hot Dipped Galvanized Iron

Hot Dipped Galvanized Iron

ORDER NO. Mfr. No. A B C D Fastener420-40910 /ea 040910 10" 3-3/8" 2-7/16" 4-13/16" 1/2" Bolt420-40912 /ea 040912 12" 3-3/4" 3-7/16" 6-7/8" 5/8" Bolt

ORDER NO. Mfr. No. A B C D Fastener420-40104 /pr 040104-1 4" 1-1/8" 7/8" 1-7/8" # 10 FH420-40106 /pr 040106-1 6" 1-3/8" 1-1/4" 2-3/16" 1/4" Bolt420-40108 /ea 040108-1 8" 2-1/8" 1-11/16" 3-1/4" 5/16" Bolt420-40110 /ea 040110 10" 2-1/2" 2-3/8" 4-1/16" 3/8" Bolt

ORDER NO. Mfr. No. A B C D Fastener420-41604 /ea 041604-1 4" 15/16" 1-3/4" 1" # 10 FH420-41606 /ea 041606-1 6" 1-1/4" 2-1/4" 1-1/8" 1/4" FH420-41608 /ea 041608-1 8" 1-1/2" 2-13/16" 1-3/8" 1/4" FH420-41610 /ea 041610-1 10" 1-7/8" 3-5/8" 1-3/4" 5/16" FH

ORDER NO. Mfg. No. A B C D Fastener420-43030 /pr 043030-1 3" 11/16" 1" 1-5/8" # 6 FH420-43040 /pr 043040-1 4" 7/8" 1-1/8" 2" # 8 FH420-43050 /pr 043050-1 5" 1-1/16" 1-7/16" 2-1/2" # 10 FH420-43065 /ea 043065-1 6-1/2" 1-3/8" 1-11/16" 2-15/16" # 12 FH

Injection Molded Nylon

567

CLEATS


HEAVY DUTY CLEATInjection Molded Nylon

HALYARD CLEATInjection Molded Nylon/Stamped 304 Stainless

FOLDING D-RING316 Stainless Steel Base/17-4PH D-Ring

Nylon construction with stainless steel mountingplate. Designed to mount on any 3/16" - 5/16"diameter shroud and used for tying off a halyardwhen not in use. Additional uses include mountingattachments for flags, solar showers, awnings,topping lift tie, antenna, etc.

ORDER NO. Mfr. No. A B420-50110 /ea. 050110-1 3-7/8" 1/2"

CHROME ZINC & STAINLESS CLEATS

Mfr. No. 916044ORDER NO. 429-16044

Contains:Qty Sea-Dog # Description ORDER NO.2 ea 041604-1 Stainless Open Base Cleat – 4 inch 420-416042 ea 041606-1 Stainless Open Base Cleat – 6 inch 420-416062 ea 041608-1 Stainless Open Base Cleat – 8 inch 420-416082 ea 044104-1 Zinc Chrome 4-Hole Cleat – 4-1/2 inch 425-441042 ea 044106-1 Zinc Chrome 4-Hole Cleat – 6 inch 425-441062 ea 044604-1 Zinc Chrome Open Base Cleat – 4 inch 420-446042 ea 044606-1 Zinc Chrome Open Base Cleat – 6 inch 420-446061 pr 672100-1 Zinc Chrome Tie Down Cleat – 4-1/2 inch 426-72100

ORDER NO. Mfr. No. A B C D E Colour Fastener420-43360 043360-1 6-1/16" 1-1/4" 1-9/16" 2-1/4" N/A Black 1/4" FH420-43341 043341-1 4-1/4" 1" 1-1/4" 1-3/4" N/A White #10 FH

DISPLAY

ORDER NO. Mfr. No. A B C D Fastener420-48610 /ea 048610-1 2-1/8" 1-3/16" 1/4" 7/8" 1/4" FH

Individual

568

DECK HARDWARE

RAIL MOUNT CLEATInjection Molded Nylon/Stainless Steel

Ideal for easy attachment of fenders, flag halyards, canvas tie downs and related accessories.Includes a 043340 heavy duty black nylon cleat.

RAIL MOUNT FAIRLEAD WITH STAINLESS INSERTInjection Molded Nylon/Stainless Steel

Allows easy routing of roller furling lines. The stainless insert allows use of wire lines if necessary.Includes a 082615 nylon fairlead with stainless insert.

RAIL MOUNT FLAGPOLEInjection Molded Nylon/Stainless Steel

The Sea-Dog Adjustable Flagpole is made of highly polished, heavy wall stainless steel tubing.The flag is attached to the flagpole using nylon penant mounts with stainless steel spring wirequick release clips which are designed to hold their shape after continued use. Both penantmounts can move either direction on the flagpoles allowing flexibility in mounting varioussizes of flags where the eyelets of the flag are less than the overall length of the flagpole.The 327122-1 & 327124-1 incorporate a rail mount flagpole holder forthe 17" & 30" flagpoles that can attach to either 7/8" or 1" tubing.

The Sea-Dog Rail Mount Flagpole comes complete with split rings for easy flag attachment.

ADJUSTABLE RAIL MOUNT FLAGPOLEInjection Molded Nylon & Polypropylene/Stainless Steel

ORDER NO. Mfr. No. A B

423-27112 327112-1 11/16" 7/8"-1"


423-27111 327111-1 4-5/16" 7/8"-1"

ORDER NO. Mfr. No. Size A B Flagpole Included

423-27122 327122-1 17" 15-1/4" 7/8"-1" 17"

423-27124 327124-1 30" 28-1/4" 7/8"-1" 30"


423-27120 327120-1 15-1/2" 7/8"-1"


569

SKENE CHOCKS



D

C

A

B

SKENE BOW CHOCKS

SKENE CHOCKS

SKENE CHOCKS

BOW CHOCKS

D

C

A

B


Sand Cast Brass Chrome Plated


Chrome Plated Zinc

ORDER NO. Mfr. No.621-12230 1223DP0CHR

Sold as pairs

• Max. Rope Size: 1/2"• Screw Size # 8

• Overall Length: 3-1/2"• Width: 7/8"

ORDER NO. Mfr. No. A B C D Fastener420-60040 060040-1 4-3/4" 13/16" 1/2" 3-5/16" # 10 FH

Sold as pairs

ORDER NO. Mfr. No. A B C D Fastener425-64030 064030-1 3-3/8" 3/4" 5/8" 2-1/2" # 10 FH

Sold as pairs

ORDER NO. Mfr. No. A B C D Fastener420-60060 060060-1 4-1/2" 13/16" 11/16" 3-5/16" # 10 FH420-60065 060065-1 6” 1-1/8" 13/16" 4-5/8" # 1/4” FH

Sold as pairs

570

BOW EYES/CABIN HARDWARE


EYEBOLT WITH SHOULDERMachined AISI 304 StainlessORDER NO. Mfr. No. A B C D E Breaking

Strength (lb.)420-80488 080488-1 5/16" - 8mm 4-15/16" 5/8" 3" 1" 5,250

Black

FAIRLEADInjection Molded Nylon

ORDER NO. Mfr. No. A B C D Fastener420-82010 / ea. 082010 3/8" 3/4" 7/8" 7/16" #8 RH

U-BOLT BOW EYE7/16" Stainless SteelBow eye has twin shanks to prevent twisting. 1-9/16” inside diameter. 1/2" x 3-1/4"thread length. Up to 12,000 lb. pull. Plated nuts and washers included.When transom-mounted this rugged bow eye can function as a ski tow.Not to be used for lifting.ORDER NO. 103-33921 Mfr. No. 3392-3 (Skin Pack)

TWIN SHANK BOW EYEPerma-Plate chrome ZAMAKOne continuous plated steel U-bolt cast as an integral part of the die-cast ZAMAKeyelet. Twin Shank design prevents twisting. Cadmium-plated nuts and washersare included. 1-1/8" inside eye diameter. 5/16" x 3" U-bolt. Up to 5000 lbs pull.Not to be used for lifting.ORDER NO. 103-34410 Mfr. No. 3441-3 (Skin Pack)

TIE DOWN EYE STRAPForged Bronze Wire Chrome Plated

ORDER NO. Mfr. No. A B C Fastener420-81251 / pr. 081251-1 3/8" 1-1/16" 2-1/8" #10 FH

Tie Down Eye Straps can be used for a multiple of hold down applications. Fitting 1" webbing,and is used commonly to hold down batteries, fuel tanks, ice chests, life rafts, dinghies, etc.

EXIT PLATEStamped 316 StainlessORDER NO. Mfr. No. A B C D Line Size Style Fastener420-81010 081010 1-1/4" 3-1/4" 3/4" 2-3/4" Up to 1/2" Curved #10 RH420-81013 081013 2" 4-5/8" 1-1/2" 3-5/8" Up to 3/4" Curved #10 RH

Exit Plates are used to guide halyard from out of a mast or spar or from below deck and allowexterior adjustment of the halyard. Two sizes are available in both flat versions and curved versionsfor small masts or spars. The small exit plates have a stamped wear guard and the large exit plateshave a welded stainless round bar wear guard.


420-81010

571

BOW EYES

BOW EYEDie Cast Chrome Zinc Head - Galvanized Shaft

ORDER NO. Mfr. No. A B C D E BreakingStrength (lb.)

420-79233 079233-1 5/16" 2-15/16" 1-1/8" 5-1/4" 1-5/8" 6000

TWIN SHANK BOW EYEDie Cast Chrome Zinc Head - Chrome Steel Shafts

ORDER NO. Mfr. No. Thread A B C D E BreakingStrength(lb.)

420-80031 080031-1 3/8" NC 3/8" 1-1/2" 1-1/16" 2-7/8" 1-7/16" 16,000420-80033 080033-1 3/8" NC 3/8" 2-1/2" 1-1/16" 3-15/16" 1-7/16" 16,000420-80035 080035-1 3/8" NC 3/8" 3-1/2" 1-1/16" 4-15/16" 1-7/16" 16,000420-80055 080055-1 1/2" NC 7/16" 3-1/2" 1-3/8" 5-5/16" 1-7/8" 25,000

BOW EYEMachined AISI 304 Stainless

Sea-Dog Bow Eyes come with adjustable finished nuts as compared to the crimped ring used on mostother bow eyes. The 3/8" and 7/16" shafts have rolled threads.All parts are made of stainless steel.Plate sizes: 080031-080035: 2-1/4" x 3/4" (both plates) 080055: 3" x 3/4" (both plates).

Threads: 5/16"-18 UNC. Comparable to Perko® #1235. U-Bolt surrounds cast eye for added strength

ORDER NO. Mfr. No. Thread A B C D E BreakingStrength(lb.)

420-80135 080135-1 3/8" NC 3/8" 3-1/2" 1-1/16" 4-15/16" 1-7/16" 16,000

STERN EYEMachined AISI 304 Stainless

Sea-Dog Stern Eyes come with adjustable finished nuts as compared to the crimped ring used on mostother stern eyes. The 3/8" shaft has rolled threads. All parts are made of stainless steel.Plate sizes: 080135: 2-1/4" x 3/4" (plate 1) 2-3/4" x 1-1/4" (plate 2).


420-80288 080288-1 5/16" - 8mm 3-1/8" 1" 4-1/2" 1-5/16" 3,850

U-BOLTMachined AISI 304 Stainless

All Sea-Dog U-Bolts listed above have metric threads. The outer mounting plate is held inplace by crimped ears forged into the U-Bolt.Plate size: 080288: 2" x 11/16" (both plates).


420-79133 079133-1 3/8" NC 2-9/16" 15/16" 5-1/8" 1-13/16" 2500425-79135 079135-1 3/8" NC 4-5/8" 15/16" 6-5/8" 1-13/16" 2500


572

DECK HARDWARE


DECK STEP - Injection Molded Rubber/Stamped 304 Stainless

ORDER NO. Mfr. No. A B C Fastener423-28012 / pr. 328012-1 2-1/4" 8-3/8" 7-11/16" #8 FH423-28013 / pr. 328013-1 3-3/8" 8-7/8" 8-3/16" #8 FH423-28017 / pr. 328017-1 Replacement Pad for 328012

ORDER NO. Mfr. No. A B C D E F Fastener423-21800 321800 4-1/16" 5-5/8" 2-3/4" 4-1/8" 2-1/2" 3-3/4" #10 FH

ORDER NO. Mfr. No. A B C D E F Fastener423-21825 321825-1 3-1/8" 2-3/8" 2-7/16" 3-5/8" 1/2" 1-7/8" 3/8" FH

ORDER NO. Mfr. No. A B C D E Fastener423-22070 322070 1" 4-1/2" 6-1/4" 2-1/4" 4" #8 FH423-22075 322075-1 Replacement Cap & Chain

ORDER NO. Mfr. No. A B C D Fastener423-22080 322080-1 1" 1-3/4" 3-1/8" 1-1/2" #8 FH

Chain stoppers for Sea-Dog and comparable bow rollers. Mounts alone or inside most bow rollers.#423-21825 fits chain sizes 5/16" - 3/8". Chain stoppers help prevent damage to windlass.

HINGED CHAIN DECK PIPEDie Cast Brass Chrome Plated

CHAIN DECK PIPEForged Brass Chrome Plated

CHAIN STOPPERStamped 304 Stainless

STEP PADOverall width: 2-1/4"Overall length: 8-3/8"Pre-drilled with two mounting holes to accommodate #8 screws.Durable step pads prevent slipping on wet, high-traffic areas.Stainless steel frames. Black vinyl inserts. For narrow gunwales.ORDER NO. 106-62580 (Each)

FOLDING STEPSand Cast Brass Chrome PlatedORDER NO. 423-22620Mfr. No.322620-1

A B C2" 3-1/4" 4-5/16"D E F1-13/16" 13/16" 3-7/16"Fastener: # 12 FH

CHAIN DECK PIPEInvestment Cast 316 Stainless


573

DECK PLATES/INSPECTION COVER


B

A

CD

B

A

CD

ORDER NO. Mfr. No. Color A B C Fastener423-37051 337051-1 White 5-5/8" 4-1/4" 4-13/16" #10 FH

B

A

CD

SCREW OUT DECK PLAT - Injection Molded ABSSea-Dog Line deck plates are molded to the highest standards using top quality UVstabilizers and anti-oxidants. Use silicone sealant on hull or deck surface when installingthe deck plate ring.Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease.NOTE: Avoid contact with acetone or strong solvents.

SCREW OUT DECK PLATE WITH CLEAR COVER - Injection Molded ABS/PolycarbonateORDER NO. Mfr. No. A B C D Colour Fastener423-37161 337161-1 6-1/2" 8-1/8" 6-1/2" 7-1/4" White #8 FH

The Sea-Dog Screw Out Deck Plate with clear polycarbonate lid allows visual inspection of watertight compartments,storage lockers and fuel fittings without removing the lid.Use silicone sealant on hull or deck surface when installing the deck plate.Lubricate with Teflon grease or Vaseline and clean with hot, soapy water.NOTE: Avoid contact with acetone or strong solvents.

POP-OUT DECK PLATE - Injection Molded ABS/Polycarbonate

Sea-Dog Line’s Pop-Out Deck Plate is UV stabilized and features an integratedPop-Up lever which makes opening and closing a snap, no tools required. Engineeredrubber O-ring for water tight fit. Available with either a smooth lid or knurledpattern non-skid lid. Patent pending.

ORDER NO. Mfr. No. A B C D Colour Texture Fastener Std. Pk.423-36265 336265-1 6-1/2" 8-1/8" 6-1/2" 7-3/8" Black Smooth #8 FH Each423-36267 336267-1 6-1/2" 8-1/8" 6-1/2" 7-3/8" Black Textured #8 FH Each

ORDER NO. Mfr. No. A B C D Colour Fastener423-37140 337140-1 4-7/16" 5-3/4" 4-1/2" 5-1/8" White #8 FH423-37145 337145-1 4-7/16" 5-3/4" 4-1/2" 5-1/8" Black #8 FH423-37150 337150-1 5-7/16" 6-3/4" 5-1/2" 6-1/8" White #8 FH423-37160 337160-1 6-1/2" 8-1/8" 6-1/2" 7-1/4" White #8 FH423-37165 337165-1 6-1/2" 8-1/8" 6-1/2" 7-1/4" Black #8 FH

INSPECTION COVER - Injection Molded ABS

QUARTER-TURN DECK PLATE - Injection Molded ABS/Polycarbonate

Sea-Dog Line’s Quarter-Turn Deck Plate is UV stabilized and features a new locking systemthat prevents over tightening, jamming and cross threading. Easy to open and close.A specially engineered lubricated gasket is used in conjunction with a knife edge for aleak tested seal. Patent pending.

ORDER NO. Mfr. No. A B C D Colour Texture Fastener Std. Pk.423-36140 336145-1 4-1/2" 6-1/8" 4-1/2" 5-3/8" Black Smooth #8 FH Each423-36167 336167-1 6-1/2" 8-1/8" 6-1/2" 7-3/8" Black Textured #8 FH Each

574

DECK FILLS

DECK FILL WITH SLOTTED CAP - Investment Molded Fibreglass Nylon-Black

ORDER NO. Mfr. No Cap Marking Cap Colour A B C FASTENER423-57010 357010-1 Gas Red 1-1/2” Hose 1-9/16” 2-3/4” #10FH423-57015 357015-1 Gas Red Replacement Cap Only423-57000/ ea. 357000-1 None:Body Only 1-1/2” Hose 1-9/16” 2-3/4” #10 FH423-57016/ ea. 357016-1 Diesel Green Replacement Cap Only423-57017/ ea. 357017-1 Water Blue Replacement Cap Only423-57018/ ea. 357018-1 Waste Black Replacement Cap Only

All caps include attachment chains.

HOSE DECK FILL - Investment Cast 316 StainlessORDER NO. Mfr. No. Body Marking A B C FASTENER423-51300 351300-1 Body Only 1-1/2” Hose 2-3/16” 2-3/8” #10FH423-51320 351320-1 Gas 1-1/2” Hose 2-3/16” 2-3/8” #10FH423-51321 351321-1 Diesel 1-1/2” Hose 2-3/16” 2-3/8” #10FH423-51390 351390-1 Replacement Cap Only423-57399 357399-1 Nylon Deck Fill KeyNote: The cap threads are 1-1/4” - 11-1/2 NPSM - Straight. Caps include attachment chains.

DECK FILL WITH KEYLESS CAP - Injection Molded Fibreglass NylonThe Sea-Dog Keyless Fills are entirely molded from fibreglass filled nylon and do not require grounding to the boatelectrical system as required on all deck fills using metal components. Each deck fill has a special cap with a built-in keyfor easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed intothe cap for a flush surface. In addition the caps are molded in special colours to help prevent the dangerous and costlyproblems caused by placing fuel in water or waste tanks or vice-versa.

ORDER NO. Mfr. No. Body Colour Cap Marking Cap Colour A B C FASTENER423-57000/ ea. 357000-1 Black None:Body Only 1-1/2” Hose 1-9/16” 2-3/4” #10 FH423-57090/ ea. 357090-1 Gas Red Replacement Cap Only423-57091/ ea. 357091-1 Diesel Green Replacement Cap Only423-57092/ ea. 357092-1 Oil Black Replacement Cap Only423-57093/ ea. 357093-1 Water Blue Replacement Cap Only423-57094/ ea. 357094-1 Waste Black Replacement Cap Only

The cap threads are 1-1/4” - 11/1/2 NPSM - Straight. Gas, diesel and water caps include attachment chains.NOTE: Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (Not included).

HOSE DECK FILL WITH KEYLESS CAP & SPLASH GUARDInjection Molded Fibreglass Nylon

ORDER NO. Mfr. No. Body Colour Marking A B C FASTENER423-57001/ ea. 357001-1 Black None:Body Only 1-1/2” Hose 1-9/16” 2-3/4” #10 FH

* Choose cap from list above.

HOSE DECK FILL WITH SPLASH GUARD - Die Cast Zinc Chrome Plated

ORDER NO. Mfr. No. Cap Marking A B C FASTENER423-51750 351750-1 Gas 1-1/2” Hose 1-5/8” 2-3/8” #10FH423-51755 351755-1 Replacement Cap Only

Cap includes attachment chain.

ANGLED HOSE DECK FILL - Investment Cast 316 Stainless

ORDER NO. Mfr. No. Cap Marking A B C FASTENER423-51520 351520 Gas 1-1/2” Hose 30º 2-3/8” #10 FHNote: The cap threads are 1-1/4” - 11/12 NPSM - Straight. Caps include attachment chains.

Body Only

For more information see www.sea-dog.com

575

VENTED DECK FILLS & ACCESSORIES

VENTED DECK FILLS FOR 1-1/2” HOSEWith Colour Coded Resin Inserts for Gas, Diesel & Water• Chrome plated bronze scalloped cap with 3 colour coded resin inserts1 each Gas, Diesel & Water• Black polymer body• Integral tank vent with flame arrestor & anti surge valve• Deck plate key included• For hose size: 1-1/2”• For vent hose: 5/8”• Length of neck: 2-7/16”• Screw Size: #8• CE Certification

Straight Angled

DECK FILLS FOR 1-1/2" HOSEWith Colour Coded Resin Inserts for Gas, Diesel, Water & Waste• Chrome plated bronze scalloped cap with 4 colour coded resin inserts1 each Gas, Diesel, Water & Waste• Black polymer body - Straight neck• Deck plate key included• For hose size: 1-1/2”• Length of neck: 3-1/8”• Mounting Hole Diameter: 2-1/8” - Screw Size: #8• CE CertificationMfr. No. 0552DPOCHRORDER NUMBER 621-05520

ORDER NO. Mfr. No. Neck

621-05820 0582DPOCHR Angled

621-05830 0583DPOCHR Straight

ORDER NO. Mfr. No.

621-05250 / ea. 0525DPOBLK

621-05251 / 12 Piece-Display 0525DPODIS

FUEL SYSTEM LOCKING INSERTFOR 1-1/2" VENTED FILLS• Black polymer with zinc alloy lock cylinder• Dual Purpose Key opens fill cap & locking insert• Fits most Perko® vented fills• Available as 1/package or 12 piece countertop display

621-05400 621-05410

COMBINATION GAS FILL & TANK VENTChrome plated bronze cap with black polymer body.For 1-1/2” fuel hose. For 5/8” vent hose. Integral tank vent withflame arrestor and anti-surge valve. Stainless steel bead chain.Deck plate key included.

ORDER NO. 621-12470 Spare Deck Plate KeyORDER NO. 621-05401 Spare Cap with Chain

GAS TANK VENTChrome plated zinc with black polymer splashguard and removable 30 mesh,stainless steel wire screen flame arrester.Max. hull thickness: 3/4"Hose Size: 5/8"ORDER NO. 621-05064

ORDER NO. Mfr. No. Marked For Cap Type For Fuel Hose For VentHose Neck Length Screw Size Neck

621-05410 541 DPG CHR Gas Chrome 1-1/2” 5/8” 2-7/16” 8 Straight

621-05400 540 DPG CHR Gas Chrome 1-1/2” 5/8” 2-7/16” 8 Angled

621-05401

For more information see www.perko.com

576

FUEL TANK ACCESSORIES

GAS TANK VENTS - 90° P-Trap Fuel Tank VentThis vent helps prevent water from entering the fuel tank, yet allows air to ventfreely, during normal sea conditions and washdowns.This eliminates the need for an anti-siphon loop in thevent hose. For 5/8" ID hose. Meets ABYC Standard. Thearrows in this cross-section show the baffled route thatthe water would have to travel in order to reach the fuelvent hose.90° Fuel Tank Vent - BlackMfr. No. 1670-3 ORDER NO. 101-16700(Black with black vent head)

FUEL VENT LINE SURGE PROTECTORAvoid Fuel Spills and Fines!• Helps prevent vent line spills due to tanksloshing and refueling.

• Installs easily into existing built-in 5/8" vent lines.• Avoid environmental damage and federal fines for fuel spills!Mfr. No. 16756 ORDER NO. 101-16750

GAS TANK VENTDie Cast Zinc Chrome Plated

GAS TANK VENT 90˚Machined Brass Chrome Plated

A = 7/8"B = 2-3/8"C = 5/8" HoseMfr. No. 352030-1ORDER NO. 423-52030

A = 1"B = 2-1/8"C = 5/8" HoseD = 1-1/8"Mfr. No. 352100-1ORDER NO. 423-52100

A = 3/4"B = 1-3/4"C = 5/8" HoseD = 1"Mfr. No. 352110-1ORDER NO. 423-52110

FUEL TANK VENTStainless steel vent with screened holes.Hose size: 5/8" I.DMax. Hull Thickness: 1/2"Install. Hole Size: 7/8"Mfr. No. 66004-3ORDER NO. 106-66004

• Patented splash-resistant, corrosion-resistantpolypropylene.

• For use with 5/8" ID hose.• Installation hole diameter 3/4"• Maximum hull thickness 7/8"Mfr. No. 1607A1ORDER NO. 101-16070 (White)

Meets ABYC Ventilation Specifications.U.S. Patent Nos. 4,825,905. and D.314,172.

DECK PLATES - FOR HOSE

Chrome Plated Zinc Alloy with Black Polymer Cap. Complete with Key,O-Ring and Integral Retainer on Cap. Caps Have A Slot Between theHoles. Ground wire required.Hose Size: 1-1/2" / O.D. Flange: 3-1/2"ORDER NO. 621-12701 - Gas Deck PlateORDER NO. 621-12487 - Spare KeyORDER NO. 621-51308 - Spare O-Rings Only (2/bag)ORDER NO. 621-12709 - Spare Gas Cap w/ O-Ring & Retainer

621-13990

GAS TANK VENTDie Cast Zinc Chrome Plated


For more information see: www.scepter.com

Chrome Plated Zinc Alloy with Black Polymer Flange & Cap with Strap.Complete with Grounding Screw, Cap Retainer & Gasket.Locking Cap Has a Cover for the Key Hole.

ORDER NO. 621-13990 - Gas Deck Plate w/LockORDER NO. 621-01261 - Spare Non-Locking CapORDER NO. 621-13241 - Spare Locking Cap

GAS CAPSBlack Plastic Completewith Gasket.Caps Will Fit allPERKO CHROMALEX Fills.


621-12701

621-01261

TOPSIDE TANK HOLD DOWN KITKit includes two (2) flexible 183cm straps,two (2) mounting blocks, two (2) eyehooks and four (4) stainless steel screws.Mfr. No. 07148ORDER NO. 615-35711


CC Marine 2013-14 Catalogue_Deck Hardware

Documents

boat manufacturers

boatguard covers

boat model numbers

complete boat cover

correct cover

cover surface

center line length

wide tie